diff options
Diffstat (limited to 'compiler/utils/dex_instruction_utils.h')
-rw-r--r-- | compiler/utils/dex_instruction_utils.h | 200 |
1 files changed, 0 insertions, 200 deletions
diff --git a/compiler/utils/dex_instruction_utils.h b/compiler/utils/dex_instruction_utils.h deleted file mode 100644 index bb2c592..0000000 --- a/compiler/utils/dex_instruction_utils.h +++ /dev/null @@ -1,200 +0,0 @@ -/* - * Copyright (C) 2014 The Android Open Source Project - * - * Licensed under the Apache License, Version 2.0 (the "License"); - * you may not use this file except in compliance with the License. - * You may obtain a copy of the License at - * - * http://www.apache.org/licenses/LICENSE-2.0 - * - * Unless required by applicable law or agreed to in writing, software - * distributed under the License is distributed on an "AS IS" BASIS, - * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - * See the License for the specific language governing permissions and - * limitations under the License. - */ - -#ifndef ART_COMPILER_UTILS_DEX_INSTRUCTION_UTILS_H_ -#define ART_COMPILER_UTILS_DEX_INSTRUCTION_UTILS_H_ - -#include "dex_instruction.h" - -namespace art { - -// Dex invoke type corresponds to the ordering of INVOKE instructions; -// this order is the same for range and non-range invokes. -enum DexInvokeType : uint8_t { - kDexInvokeVirtual = 0, // invoke-virtual, invoke-virtual-range - kDexInvokeSuper, // invoke-super, invoke-super-range - kDexInvokeDirect, // invoke-direct, invoke-direct-range - kDexInvokeStatic, // invoke-static, invoke-static-range - kDexInvokeInterface, // invoke-interface, invoke-interface-range - kDexInvokeTypeCount -}; - -// Dex instruction memory access types correspond to the ordering of GET/PUT instructions; -// this order is the same for IGET, IPUT, SGET, SPUT, AGET and APUT. -enum DexMemAccessType : uint8_t { - kDexMemAccessWord = 0, // op 0; int or float, the actual type is not encoded. - kDexMemAccessWide, // op_WIDE 1; long or double, the actual type is not encoded. - kDexMemAccessObject, // op_OBJECT 2; the actual reference type is not encoded. - kDexMemAccessBoolean, // op_BOOLEAN 3 - kDexMemAccessByte, // op_BYTE 4 - kDexMemAccessChar, // op_CHAR 5 - kDexMemAccessShort, // op_SHORT 6 - kDexMemAccessTypeCount -}; - -std::ostream& operator<<(std::ostream& os, const DexMemAccessType& type); - -// NOTE: The following functions disregard quickened instructions. - -constexpr bool IsInstructionReturn(Instruction::Code opcode) { - return Instruction::RETURN_VOID <= opcode && opcode <= Instruction::RETURN_OBJECT; -} - -constexpr bool IsInstructionInvoke(Instruction::Code opcode) { - return Instruction::INVOKE_VIRTUAL <= opcode && opcode <= Instruction::INVOKE_INTERFACE_RANGE && - opcode != Instruction::RETURN_VOID_BARRIER; -} - -constexpr bool IsInstructionInvokeStatic(Instruction::Code opcode) { - return opcode == Instruction::INVOKE_STATIC || opcode == Instruction::INVOKE_STATIC_RANGE; -} - -constexpr bool IsInstructionGoto(Instruction::Code opcode) { - return Instruction::GOTO <= opcode && opcode <= Instruction::GOTO_32; -} - -constexpr bool IsInstructionIfCc(Instruction::Code opcode) { - return Instruction::IF_EQ <= opcode && opcode <= Instruction::IF_LE; -} - -constexpr bool IsInstructionIfCcZ(Instruction::Code opcode) { - return Instruction::IF_EQZ <= opcode && opcode <= Instruction::IF_LEZ; -} - -constexpr bool IsInstructionIGet(Instruction::Code code) { - return Instruction::IGET <= code && code <= Instruction::IGET_SHORT; -} - -constexpr bool IsInstructionIPut(Instruction::Code code) { - return Instruction::IPUT <= code && code <= Instruction::IPUT_SHORT; -} - -constexpr bool IsInstructionSGet(Instruction::Code code) { - return Instruction::SGET <= code && code <= Instruction::SGET_SHORT; -} - -constexpr bool IsInstructionSPut(Instruction::Code code) { - return Instruction::SPUT <= code && code <= Instruction::SPUT_SHORT; -} - -constexpr bool IsInstructionAGet(Instruction::Code code) { - return Instruction::AGET <= code && code <= Instruction::AGET_SHORT; -} - -constexpr bool IsInstructionAPut(Instruction::Code code) { - return Instruction::APUT <= code && code <= Instruction::APUT_SHORT; -} - -constexpr bool IsInstructionIGetOrIPut(Instruction::Code code) { - return Instruction::IGET <= code && code <= Instruction::IPUT_SHORT; -} - -constexpr bool IsInstructionSGetOrSPut(Instruction::Code code) { - return Instruction::SGET <= code && code <= Instruction::SPUT_SHORT; -} - -constexpr bool IsInstructionAGetOrAPut(Instruction::Code code) { - return Instruction::AGET <= code && code <= Instruction::APUT_SHORT; -} - -constexpr bool IsInstructionBinOp2Addr(Instruction::Code code) { - return Instruction::ADD_INT_2ADDR <= code && code <= Instruction::REM_DOUBLE_2ADDR; -} - -// TODO: Remove the #if guards below when we fully migrate to C++14. - -constexpr bool IsInvokeInstructionRange(Instruction::Code opcode) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionInvoke(opcode)); -#endif - return opcode >= Instruction::INVOKE_VIRTUAL_RANGE; -} - -constexpr DexInvokeType InvokeInstructionType(Instruction::Code opcode) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionInvoke(opcode)); -#endif - return static_cast<DexInvokeType>(IsInvokeInstructionRange(opcode) - ? (opcode - Instruction::INVOKE_VIRTUAL_RANGE) - : (opcode - Instruction::INVOKE_VIRTUAL)); -} - -constexpr DexMemAccessType IGetMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionIGet(opcode)); -#endif - return static_cast<DexMemAccessType>(code - Instruction::IGET); -} - -constexpr DexMemAccessType IPutMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionIPut(opcode)); -#endif - return static_cast<DexMemAccessType>(code - Instruction::IPUT); -} - -constexpr DexMemAccessType SGetMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionSGet(opcode)); -#endif - return static_cast<DexMemAccessType>(code - Instruction::SGET); -} - -constexpr DexMemAccessType SPutMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionSPut(opcode)); -#endif - return static_cast<DexMemAccessType>(code - Instruction::SPUT); -} - -constexpr DexMemAccessType AGetMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionAGet(opcode)); -#endif - return static_cast<DexMemAccessType>(code - Instruction::AGET); -} - -constexpr DexMemAccessType APutMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionAPut(opcode)); -#endif - return static_cast<DexMemAccessType>(code - Instruction::APUT); -} - -constexpr DexMemAccessType IGetOrIPutMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionIGetOrIPut(opcode)); -#endif - return (code >= Instruction::IPUT) ? IPutMemAccessType(code) : IGetMemAccessType(code); -} - -constexpr DexMemAccessType SGetOrSPutMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionSGetOrSPut(opcode)); -#endif - return (code >= Instruction::SPUT) ? SPutMemAccessType(code) : SGetMemAccessType(code); -} - -constexpr DexMemAccessType AGetOrAPutMemAccessType(Instruction::Code code) { -#if __cplusplus >= 201402 // C++14 allows the DCHECK() in constexpr functions. - DCHECK(IsInstructionAGetOrAPut(opcode)); -#endif - return (code >= Instruction::APUT) ? APutMemAccessType(code) : AGetMemAccessType(code); -} - -} // namespace art - -#endif // ART_COMPILER_UTILS_DEX_INSTRUCTION_UTILS_H_ |