diff options
-rw-r--r-- | libc/bionic/semaphore.c | 221 | ||||
-rw-r--r-- | libc/docs/CHANGES.TXT | 5 | ||||
-rw-r--r-- | libc/unistd/sysconf.c | 2 |
3 files changed, 180 insertions, 48 deletions
diff --git a/libc/bionic/semaphore.c b/libc/bionic/semaphore.c index 0a6cab4..96819ae 100644 --- a/libc/bionic/semaphore.c +++ b/libc/bionic/semaphore.c @@ -32,15 +32,60 @@ #include <time.h> #include <bionic_atomic_inline.h> #include <bionic_futex.h> +#include <limits.h> -/* Use the lower 31-bits for the counter, and the high bit for - * the shared flag. +/* In this implementation, a semaphore contains a + * 31-bit signed value and a 1-bit 'shared' flag + * (for process-sharing purpose). + * + * We use the value -1 to indicate contention on the + * semaphore, 0 or more to indicate uncontended state, + * any value lower than -2 is invalid at runtime. + * + * State diagram: + * + * post(1) ==> 2 + * post(0) ==> 1 + * post(-1) ==> 1, then wake all waiters + * + * wait(2) ==> 1 + * wait(1) ==> 0 + * wait(0) ==> -1 then wait for a wake up + loop + * wait(-1) ==> -1 then wait for a wake up + loop + * + */ + +/* Use the upper 31-bits for the counter, and the lower one + * for the shared flag. */ -#define SEM_VALUE_MASK 0x7fffffff -#define SEM_SHARED_MASK 0x80000000 +#define SEMCOUNT_SHARED_MASK 0x00000001 +#define SEMCOUNT_VALUE_MASK 0xfffffffe +#define SEMCOUNT_VALUE_SHIFT 1 + +/* Maximum unsigned value that can be stored in the semaphore. + * One bit is used for the shared flag, another one for the + * sign bit, leaving us with only 30 bits. + */ +#define SEM_MAX_VALUE 0x3fffffff + +/* convert a value into the corresponding sem->count bit pattern */ +#define SEMCOUNT_FROM_VALUE(val) (((val) << SEMCOUNT_VALUE_SHIFT) & SEMCOUNT_VALUE_MASK) + +/* convert a sem->count bit pattern into the corresponding signed value */ +#define SEMCOUNT_TO_VALUE(sval) ((int)(sval) >> SEMCOUNT_VALUE_SHIFT) + +/* the value +1 as a sem->count bit-pattern. */ +#define SEMCOUNT_ONE SEMCOUNT_FROM_VALUE(1) + +/* the value -1 as a sem->count bit-pattern. */ +#define SEMCOUNT_MINUS_ONE SEMCOUNT_FROM_VALUE(-1) + +#define SEMCOUNT_DECREMENT(sval) (((sval) - (1U << SEMCOUNT_VALUE_SHIFT)) & SEMCOUNT_VALUE_MASK) +#define SEMCOUNT_INCREMENT(sval) (((sval) + (1U << SEMCOUNT_VALUE_SHIFT)) & SEMCOUNT_VALUE_MASK) + +/* return the shared bitflag from a semaphore */ +#define SEM_GET_SHARED(sem) ((sem)->count & SEMCOUNT_SHARED_MASK) -#define SEM_GET_SHARED(sem) ((sem)->count & SEM_SHARED_MASK) -#define SEM_GET_VALUE(sem) ((sem)->count & SEM_VALUE_MASK) int sem_init(sem_t *sem, int pshared, unsigned int value) { @@ -50,14 +95,14 @@ int sem_init(sem_t *sem, int pshared, unsigned int value) } /* ensure that 'value' can be stored in the semaphore */ - if ((value & SEM_VALUE_MASK) != value) { + if (value > SEM_MAX_VALUE) { errno = EINVAL; return -1; } - sem->count = value; + sem->count = SEMCOUNT_FROM_VALUE(value); if (pshared != 0) - sem->count |= SEM_SHARED_MASK; + sem->count |= SEMCOUNT_SHARED_MASK; return 0; } @@ -65,11 +110,14 @@ int sem_init(sem_t *sem, int pshared, unsigned int value) int sem_destroy(sem_t *sem) { + int count; + if (sem == NULL) { errno = EINVAL; return -1; } - if ((sem->count & SEM_VALUE_MASK) == 0) { + count = SEMCOUNT_TO_VALUE(sem->count); + if (count < 0) { errno = EBUSY; return -1; } @@ -106,41 +154,92 @@ int sem_unlink(const char * name) } -/* Return 0 if a semaphore's value is 0 - * Otherwise, decrement the value and return the old value. +/* Decrement a semaphore's value atomically, + * and return the old one. As a special case, + * this returns immediately if the value is + * negative (i.e. -1) + */ +static int +__sem_dec(volatile unsigned int *pvalue) +{ + unsigned int shared = (*pvalue & SEMCOUNT_SHARED_MASK); + unsigned int old, new; + int ret; + + do { + old = (*pvalue & SEMCOUNT_VALUE_MASK); + ret = SEMCOUNT_TO_VALUE(old); + if (ret < 0) + break; + + new = SEMCOUNT_DECREMENT(old); + } + while (__atomic_cmpxchg((int)(old|shared), + (int)(new|shared), + (volatile int *)pvalue) != 0); + return ret; +} + +/* Same as __sem_dec, but will not touch anything if the + * value is already negative *or* 0. Returns the old value. */ static int -__sem_dec_if_positive(volatile unsigned int *pvalue) +__sem_trydec(volatile unsigned int *pvalue) { - unsigned int shared = (*pvalue & SEM_SHARED_MASK); - unsigned int old; + unsigned int shared = (*pvalue & SEMCOUNT_SHARED_MASK); + unsigned int old, new; + int ret; do { - old = (*pvalue & SEM_VALUE_MASK); + old = (*pvalue & SEMCOUNT_VALUE_MASK); + ret = SEMCOUNT_TO_VALUE(old); + if (ret <= 0) + break; + + new = SEMCOUNT_DECREMENT(old); } - while ( old != 0 && - __atomic_cmpxchg((int)(old|shared), - (int)((old-1)|shared), - (volatile int*)pvalue) != 0 ); + while (__atomic_cmpxchg((int)(old|shared), + (int)(new|shared), + (volatile int *)pvalue) != 0); - return old; + return ret; } -/* Increment the value of a semaphore atomically. - * NOTE: the value will wrap above SEM_VALUE_MASK + +/* "Increment" the value of a semaphore atomically and + * return its old value. Note that this implements + * the special case of "incrementing" any negative + * value to +1 directly. + * + * NOTE: The value will _not_ wrap above SEM_VALUE_MAX */ static int __sem_inc(volatile unsigned int *pvalue) { - unsigned int shared = (*pvalue & SEM_SHARED_MASK); - unsigned int old; + unsigned int shared = (*pvalue & SEMCOUNT_SHARED_MASK); + unsigned int old, new; + int ret; do { - old = (*pvalue & SEM_VALUE_MASK); - } while ( __atomic_cmpxchg((int)(old|shared), - (int)(((old+1)&SEM_VALUE_MASK)|shared), - (volatile int*)pvalue) != 0); - return old; + old = (*pvalue & SEMCOUNT_VALUE_MASK); + ret = SEMCOUNT_TO_VALUE(old); + + /* Can't go higher than SEM_MAX_VALUE */ + if (ret == SEM_MAX_VALUE) + break; + + /* If the counter is negative, go directly to +1, + * otherwise just increment */ + if (ret < 0) + new = SEMCOUNT_ONE; + else + new = SEMCOUNT_INCREMENT(old); + } + while ( __atomic_cmpxchg((int)(old|shared), + (int)(new|shared), + (volatile int*)pvalue) != 0); + + return ret; } /* lock a semaphore */ @@ -156,10 +255,10 @@ int sem_wait(sem_t *sem) shared = SEM_GET_SHARED(sem); for (;;) { - if (__sem_dec_if_positive(&sem->count)) + if (__sem_dec(&sem->count) > 0) break; - __futex_wait_ex(&sem->count, shared, shared, NULL); + __futex_wait_ex(&sem->count, shared, shared|SEMCOUNT_MINUS_ONE, NULL); } ANDROID_MEMBAR_FULL(); return 0; @@ -176,13 +275,15 @@ int sem_timedwait(sem_t *sem, const struct timespec *abs_timeout) } /* POSIX says we need to try to decrement the semaphore - * before checking the timeout value */ - if (__sem_dec_if_positive(&sem->count)) { + * before checking the timeout value. Note that if the + * value is currently 0, __sem_trydec() does nothing. + */ + if (__sem_trydec(&sem->count) > 0) { ANDROID_MEMBAR_FULL(); return 0; } - /* check it as per Posix */ + /* Check it as per Posix */ if (abs_timeout == NULL || abs_timeout->tv_sec < 0 || abs_timeout->tv_nsec < 0 || @@ -212,26 +313,30 @@ int sem_timedwait(sem_t *sem, const struct timespec *abs_timeout) return -1; } - ret = __futex_wait_ex(&sem->count, shared, shared, &ts); + /* Try to grab the semaphore. If the value was 0, this + * will also change it to -1 */ + if (__sem_dec(&sem->count) > 0) { + ANDROID_MEMBAR_FULL(); + break; + } + + /* Contention detected. wait for a wakeup event */ + ret = __futex_wait_ex(&sem->count, shared, shared|SEMCOUNT_MINUS_ONE, &ts); /* return in case of timeout or interrupt */ if (ret == -ETIMEDOUT || ret == -EINTR) { errno = -ret; return -1; } - - if (__sem_dec_if_positive(&sem->count)) { - ANDROID_MEMBAR_FULL(); - break; - } } return 0; } -/* unlock a semaphore */ +/* Unlock a semaphore */ int sem_post(sem_t *sem) { unsigned int shared; + int old; if (sem == NULL) return EINVAL; @@ -239,8 +344,16 @@ int sem_post(sem_t *sem) shared = SEM_GET_SHARED(sem); ANDROID_MEMBAR_FULL(); - if (__sem_inc(&sem->count) >= 0) - __futex_wake_ex(&sem->count, shared, 1); + old = __sem_inc(&sem->count); + if (old < 0) { + /* contention on the semaphore, wake up all waiters */ + __futex_wake_ex(&sem->count, shared, INT_MAX); + } + else if (old == SEM_MAX_VALUE) { + /* overflow detected */ + errno = EOVERFLOW; + return -1; + } return 0; } @@ -252,7 +365,7 @@ int sem_trywait(sem_t *sem) return -1; } - if (__sem_dec_if_positive(&sem->count) > 0) { + if (__sem_trydec(&sem->count) > 0) { ANDROID_MEMBAR_FULL(); return 0; } else { @@ -261,13 +374,29 @@ int sem_trywait(sem_t *sem) } } +/* Note that Posix requires that sem_getvalue() returns, in + * case of contention, the negative of the number of waiting + * threads. + * + * However, code that depends on this negative value to be + * meaningful is most probably racy. The GLibc sem_getvalue() + * only returns the semaphore value, which is 0, in case of + * contention, so we will mimick this behaviour here instead + * for better compatibility. + */ int sem_getvalue(sem_t *sem, int *sval) { + int val; + if (sem == NULL || sval == NULL) { errno = EINVAL; return -1; } - *sval = SEM_GET_VALUE(sem); + val = SEMCOUNT_TO_VALUE(sem->count); + if (val < 0) + val = 0; + + *sval = val; return 0; } diff --git a/libc/docs/CHANGES.TXT b/libc/docs/CHANGES.TXT index 5a7a1ac..9389f7a 100644 --- a/libc/docs/CHANGES.TXT +++ b/libc/docs/CHANGES.TXT @@ -10,6 +10,10 @@ Differences between current and Android 2.2: - <semaphore.h>: Use private futexes for semaphore implementation, unless your set 'pshared' to non-0 when calling sem_init(). + Also fixed a bug in sem_post() to make it wake up all waiting + threads, instead of one. As a consequence, the maximum semaphore + value is now reduced to 0x3fffffff. + - <math.h>: Added sincos(), sincosf() and sincosl() (GLibc compatibility). - <sys/sysinfo.h>: Added missing sysinfo() system call implementation @@ -59,7 +63,6 @@ Differences between current and Android 2.2: - <sys/select.h>: add missing declaration for pselect() -- ------------------------------------------------------------------------------- Differences between Android 2.2. and Android 2.1: diff --git a/libc/unistd/sysconf.c b/libc/unistd/sysconf.c index 27b113c..9377802 100644 --- a/libc/unistd/sysconf.c +++ b/libc/unistd/sysconf.c @@ -44,7 +44,7 @@ #define SYSTEM_MQ_OPEN_MAX 8 #define SYSTEM_MQ_PRIO_MAX 32768 #define SYSTEM_SEM_NSEMS_MAX 256 -#define SYSTEM_SEM_VALUE_MAX (2147483647) +#define SYSTEM_SEM_VALUE_MAX 0x3fffffff /* see bionic/semaphore.c */ #define SYSTEM_SIGQUEUE_MAX 32 #define SYSTEM_TIMER_MAX 32 #define SYSTEM_LOGIN_NAME_MAX 256 |