1 files changed, 263 insertions, 0 deletions
diff --git a/base/message_loop_proxy_unittest.cc b/base/message_loop_proxy_unittest.cc
new file mode 100644
index 0000000..aeb2f0c
--- /dev/null
+++ b/base/message_loop_proxy_unittest.cc
@@ -0,0 +1,263 @@
+// Copyright (c) 2011 The Chromium Authors. All rights reserved.
+// Use of this source code is governed by a BSD-style license that can be
+// found in the LICENSE file.
+
+#include "base/message_loop_proxy.h"
+
+#include "base/atomic_sequence_num.h"
+#include "base/bind.h"
+#include "base/memory/ref_counted.h"
+#include "base/memory/scoped_ptr.h"
+#include "base/message_loop.h"
+#include "base/synchronization/waitable_event.h"
+#include "base/threading/thread.h"
+#include "testing/gtest/include/gtest/gtest.h"
+
+namespace base {
+
+namespace {
+
+class MessageLoopProxyTest : public testing::Test {
+ public:
+  MessageLoopProxyTest()
+      : current_loop_(new MessageLoop()),
+        task_thread_("task_thread"),
+        thread_sync_(true, false) {
+  }
+
+  void DeleteCurrentMessageLoop() {
+    current_loop_.reset();
+  }
+
+ protected:
+  virtual void SetUp() {
+    // Use SetUp() instead of the constructor to avoid posting a task to a
+    // partialy constructed object.
+    task_thread_.Start();
+
+    // Allow us to pause the |task_thread_|'s MessageLoop.
+    task_thread_.message_loop()->PostTask(
+        FROM_HERE,
+        Bind(&MessageLoopProxyTest::BlockTaskThreadHelper, Unretained(this)));
+  }
+
+  virtual void TearDown() {
+    // Make sure the |task_thread_| is not blocked, and stop the thread
+    // fully before destuction because its tasks may still depend on the
+    // |thread_sync_| event.
+    thread_sync_.Signal();
+    task_thread_.Stop();
+    DeleteCurrentMessageLoop();
+  }
+
+  // Make LoopRecorder threadsafe so that there is defined behavior even if a
+  // threading mistake sneaks into the PostTaskAndReplyRelay implementation.
+  class LoopRecorder : public RefCountedThreadSafe<LoopRecorder> {
+   public:
+    LoopRecorder(MessageLoop** run_on, MessageLoop** deleted_on,
+                 int* destruct_order)
+        : run_on_(run_on),
+          deleted_on_(deleted_on),
+          destruct_order_(destruct_order) {
+    }
+
+    void RecordRun() {
+      *run_on_ = MessageLoop::current();
+    }
+
+   private:
+    friend class RefCountedThreadSafe<LoopRecorder>;
+    ~LoopRecorder() {
+      *deleted_on_ = MessageLoop::current();
+      *destruct_order_ = g_order.GetNext();
+    }
+
+    MessageLoop** run_on_;
+    MessageLoop** deleted_on_;
+    int* destruct_order_;
+  };
+
+  static void RecordLoop(scoped_refptr<LoopRecorder> recorder) {
+    recorder->RecordRun();
+  }
+
+  static void RecordLoopAndQuit(scoped_refptr<LoopRecorder> recorder) {
+    recorder->RecordRun();
+    MessageLoop::current()->Quit();
+  }
+
+  void UnblockTaskThread() {
+    thread_sync_.Signal();
+  }
+
+  void BlockTaskThreadHelper() {
+    thread_sync_.Wait();
+  }
+
+  static AtomicSequenceNumber g_order;
+
+  scoped_ptr<MessageLoop> current_loop_;
+  Thread task_thread_;
+
+ private:
+  base::WaitableEvent thread_sync_;
+};
+
+AtomicSequenceNumber MessageLoopProxyTest::g_order(LINKER_INITIALIZED);
+
+TEST_F(MessageLoopProxyTest, PostTaskAndReply_Basic) {
+  MessageLoop* task_run_on = NULL;
+  MessageLoop* task_deleted_on = NULL;
+  int task_delete_order = -1;
+  MessageLoop* reply_run_on = NULL;
+  MessageLoop* reply_deleted_on = NULL;
+  int reply_delete_order = -1;
+
+  scoped_refptr<LoopRecorder> task_recoder =
+      new LoopRecorder(&task_run_on, &task_deleted_on, &task_delete_order);
+  scoped_refptr<LoopRecorder> reply_recoder =
+      new LoopRecorder(&reply_run_on, &reply_deleted_on, &reply_delete_order);
+
+  ASSERT_TRUE(task_thread_.message_loop_proxy()->PostTaskAndReply(
+      FROM_HERE,
+      Bind(&RecordLoop, task_recoder),
+      Bind(&RecordLoopAndQuit, reply_recoder)));
+
+  // Die if base::Bind doesn't retain a reference to the recorders.
+  task_recoder = NULL;
+  reply_recoder = NULL;
+  ASSERT_FALSE(task_deleted_on);
+  ASSERT_FALSE(reply_deleted_on);
+
+  UnblockTaskThread();
+  current_loop_->Run();
+
+  EXPECT_EQ(task_thread_.message_loop(), task_run_on);
+  EXPECT_EQ(current_loop_.get(), task_deleted_on);
+  EXPECT_EQ(current_loop_.get(), reply_run_on);
+  EXPECT_EQ(current_loop_.get(), reply_deleted_on);
+  EXPECT_LT(task_delete_order, reply_delete_order);
+}
+
+TEST_F(MessageLoopProxyTest, PostTaskAndReplyOnDeletedThreadDoesNotLeak) {
+  MessageLoop* task_run_on = NULL;
+  MessageLoop* task_deleted_on = NULL;
+  int task_delete_order = -1;
+  MessageLoop* reply_run_on = NULL;
+  MessageLoop* reply_deleted_on = NULL;
+  int reply_delete_order = -1;
+
+  scoped_refptr<LoopRecorder> task_recoder =
+      new LoopRecorder(&task_run_on, &task_deleted_on, &task_delete_order);
+  scoped_refptr<LoopRecorder> reply_recoder =
+      new LoopRecorder(&reply_run_on, &reply_deleted_on, &reply_delete_order);
+
+  // Grab a MessageLoopProxy to a dead MessageLoop.
+  scoped_refptr<MessageLoopProxy> task_loop_proxy =
+      task_thread_.message_loop_proxy();
+  UnblockTaskThread();
+  task_thread_.Stop();
+
+  ASSERT_FALSE(task_loop_proxy->PostTaskAndReply(
+      FROM_HERE,
+      Bind(&RecordLoop, task_recoder),
+      Bind(&RecordLoopAndQuit, reply_recoder)));
+
+  // The relay should have properly deleted its resources leaving us as the only
+  // reference.
+  EXPECT_EQ(task_delete_order, reply_delete_order);
+  ASSERT_TRUE(task_recoder->HasOneRef());
+  ASSERT_TRUE(reply_recoder->HasOneRef());
+
+  // Nothing should have run though.
+  EXPECT_FALSE(task_run_on);
+  EXPECT_FALSE(reply_run_on);
+}
+
+TEST_F(MessageLoopProxyTest, PostTaskAndReply_SameLoop) {
+  MessageLoop* task_run_on = NULL;
+  MessageLoop* task_deleted_on = NULL;
+  int task_delete_order = -1;
+  MessageLoop* reply_run_on = NULL;
+  MessageLoop* reply_deleted_on = NULL;
+  int reply_delete_order = -1;
+
+  scoped_refptr<LoopRecorder> task_recoder =
+      new LoopRecorder(&task_run_on, &task_deleted_on, &task_delete_order);
+  scoped_refptr<LoopRecorder> reply_recoder =
+      new LoopRecorder(&reply_run_on, &reply_deleted_on, &reply_delete_order);
+
+  // Enqueue the relay.
+  ASSERT_TRUE(current_loop_->message_loop_proxy()->PostTaskAndReply(
+      FROM_HERE,
+      Bind(&RecordLoop, task_recoder),
+      Bind(&RecordLoopAndQuit, reply_recoder)));
+
+  // Die if base::Bind doesn't retain a reference to the recorders.
+  task_recoder = NULL;
+  reply_recoder = NULL;
+  ASSERT_FALSE(task_deleted_on);
+  ASSERT_FALSE(reply_deleted_on);
+
+  current_loop_->Run();
+
+  EXPECT_EQ(current_loop_.get(), task_run_on);
+  EXPECT_EQ(current_loop_.get(), task_deleted_on);
+  EXPECT_EQ(current_loop_.get(), reply_run_on);
+  EXPECT_EQ(current_loop_.get(), reply_deleted_on);
+  EXPECT_LT(task_delete_order, reply_delete_order);
+}
+
+TEST_F(MessageLoopProxyTest, PostTaskAndReply_DeadReplyLoopDoesNotDelete) {
+  MessageLoop* task_run_on = NULL;
+  MessageLoop* task_deleted_on = NULL;
+  int task_delete_order = -1;
+  MessageLoop* reply_run_on = NULL;
+  MessageLoop* reply_deleted_on = NULL;
+  int reply_delete_order = -1;
+
+  scoped_refptr<LoopRecorder> task_recoder =
+      new LoopRecorder(&task_run_on, &task_deleted_on, &task_delete_order);
+  scoped_refptr<LoopRecorder> reply_recoder =
+      new LoopRecorder(&reply_run_on, &reply_deleted_on, &reply_delete_order);
+
+  // Enqueue the relay.
+  task_thread_.message_loop_proxy()->PostTaskAndReply(
+      FROM_HERE,
+      Bind(&RecordLoop, task_recoder),
+      Bind(&RecordLoopAndQuit, reply_recoder));
+
+  // Die if base::Bind doesn't retain a reference to the recorders.
+  task_recoder = NULL;
+  reply_recoder = NULL;
+  ASSERT_FALSE(task_deleted_on);
+  ASSERT_FALSE(reply_deleted_on);
+
+  UnblockTaskThread();
+
+  // Mercilessly whack the current loop before |reply| gets to run.
+  current_loop_.reset();
+
+  // This should ensure the relay has been run.  We need to record the
+  // MessageLoop pointer before stopping the thread because Thread::Stop() will
+  // NULL out its own pointer.
+  MessageLoop* task_loop = task_thread_.message_loop();
+  task_thread_.Stop();
+
+  EXPECT_EQ(task_loop, task_run_on);
+  ASSERT_FALSE(task_deleted_on);
+  EXPECT_FALSE(reply_run_on);
+  ASSERT_FALSE(reply_deleted_on);
+  EXPECT_EQ(task_delete_order, reply_delete_order);
+
+  // The PostTaskAndReplyRelay is leaked here.  Even if we had a reference to
+  // it, we cannot just delete it because PostTaskAndReplyRelay's destructor
+  // checks that MessageLoop::current() is the the same as when the
+  // PostTaskAndReplyRelay object was constructed.  However, this loop must have
+  // aleady been deleted in order to perform this test.  See
+  // http://crbug.com/86301.
+}
+
+}  // namespace
+
+}  // namespace base