From 961306dca553f6e7b5262e384317a73351a77985 Mon Sep 17 00:00:00 2001
From: "mark@chromium.org"
 <mark@chromium.org@0039d316-1c4b-4281-b951-d872f2087c98>
Date: Tue, 11 Aug 2009 00:51:02 +0000
Subject: Back out r22981, it may have caused Windows test failures. Review
 URL: http://codereview.chromium.org/164298

git-svn-id: svn://svn.chromium.org/chrome/trunk/src@22992 0039d316-1c4b-4281-b951-d872f2087c98
---
 build/mac/dump_app_syms       | 79 +++++++++++++++----------------------------
 build/mac/tweak_app_infoplist | 67 +++++++++++-------------------------
 2 files changed, 47 insertions(+), 99 deletions(-)

(limited to 'build/mac')

diff --git a/build/mac/dump_app_syms b/build/mac/dump_app_syms
index 130b5a0..cd6e626 100755
--- a/build/mac/dump_app_syms
+++ b/build/mac/dump_app_syms
@@ -1,26 +1,9 @@
-#!/bin/bash
+#!/bin/sh
 
 # Copyright (c) 2009 The Chromium Authors. All rights reserved.
 # Use of this source code is governed by a BSD-style license that can be
 # found in the LICENSE file.
 
-# This script expects the following environment variables to be set.  Xcode
-# normally sets them:
-#
-# CONFIGURATION - Release or Debug; this script only operates when Release.
-# SRCROOT - /path/to/chrome/src/chrome
-# BUILT_PRODUTS_DIR - /path/to/chrome/src/xcodebuild/Release
-#
-# The script also takes a single argument defining the branding type.
-#
-# To test this script without running an entire build:
-#
-# cd /path/to/chrome/src/chrome
-# CONFIGURATION=Release \
-#     SRCROOT=$(pwd) \
-#     BUILT_PRODUCTS_DIR=$(pwd)/../xcodebuild/Release \
-#     ../build/mac/dump_app_syms Chromium
-
 # Make sure we got the header to write into passed to us
 if [ $# -ne 1 ]; then
   echo "error: missing branding as an argument" >&2
@@ -42,43 +25,37 @@ SRC_APP_NAME=$("${BRAND_SCRIPT}" "${BUILD_BRANDING}" PRODUCT_FULLNAME)
 . "${TOP}/chrome/VERSION"
 
 BREAKPAD_DUMP_SYMS="${BUILT_PRODUCTS_DIR}/dump_syms"
+BREAKPAD_PRODUCT_ID="${BUILD_BRANDING}_Mac"
 FULL_VERSION="${MAJOR}.${MINOR}.${BUILD}.${PATCH}"
-ARCH="i386"
-
-DSYM_TAR_PATH="${BUILT_PRODUCTS_DIR}/${SRC_APP_NAME}.dSYM.tar.bz2"
-
-declare -a DSYMS
-
-for SRC_BUNDLE in "${SRC_APP_NAME}.app" \
-                  "${SRC_APP_NAME} Framework.framework" \
-                  "${SRC_APP_NAME} Helper.app" ; do
-  SRC_STEM=$(echo "${SRC_BUNDLE}" | sed -Ee 's/^(.*)\..*$/\1/')
-  SRC_BUNDLE_PATH="${BUILT_PRODUCTS_DIR}/${SRC_BUNDLE}"
-  DSYM_NAME="${SRC_BUNDLE}.dSYM"
-  DSYM_PATH="${BUILT_PRODUCTS_DIR}/${DSYM_NAME}"
-  DWARF_PATH="${DSYM_PATH}/Contents/Resources/DWARF/${SRC_STEM}"
-  BPAD_SYM_NAME="${SRC_STEM}-${FULL_VERSION}-${ARCH}.breakpad"
-  BPAD_SYM_PATH="${BUILT_PRODUCTS_DIR}/${BPAD_SYM_NAME}"
+SRC_APP_PATH="${BUILT_PRODUCTS_DIR}/${SRC_APP_NAME}.app"
+# Created by the build/mac/strip_from_xcode script.
+UNSTRIPPED_APP="${SRC_APP_PATH}.dSYM/Contents/Resources/DWARF/${SRC_APP_NAME}"
+APP_SYMBOL_FILE="${BUILT_PRODUCTS_DIR}/${SRC_APP_NAME}-${FULL_VERSION}-i386.breakpad"
+
+# Only run dump_syms if the file has changed since we last did a dump.
+if [ "${UNSTRIPPED_APP}" -nt "${APP_SYMBOL_FILE}" ] ; then
+  "${BREAKPAD_DUMP_SYMS}" -a i386 "${UNSTRIPPED_APP}" > "${APP_SYMBOL_FILE}"
+fi
+APP_DSYM_NAME="${SRC_APP_NAME}.app.dSYM"
 
-  # Only run dump_syms if the file has changed since the last dump.
-  if [ "${DWARF_PATH}" -nt "${BPAD_SYM_PATH}" ] ; then
-    "${BREAKPAD_DUMP_SYMS}" -a "${ARCH}" "${DWARF_PATH}" > "${BPAD_SYM_PATH}"
-  fi
+# Do the same thing for chrome_dll.
 
-  # Remove the .dSYM archive if the file has changed since the archive was
-  # last generated.  This will cause a new .dSYM archive to be created.
-  if [ "${DWARF_PATH}" -nt "${DSYM_TAR_PATH}" ] ; then
-    rm -f "${DSYM_TAR_PATH}"
-  fi
+SRC_DYLIB_NAME="${SRC_APP_NAME} Framework"
+SRC_DYLIB_PATH="${BUILT_PRODUCTS_DIR}/${SRC_DYLIB_NAME}.framework"
+UNSTRIPPED_DYLIB="${SRC_DYLIB_PATH}.dSYM/Contents/Resources/DWARF/${SRC_DYLIB_NAME}"
+DYLIB_SYMBOL_FILE="${BUILT_PRODUCTS_DIR}/${SRC_DYLIB_NAME}-${FULL_VERSION}-i386.breakpad"
+if [ "${UNSTRIPPED_DYLIB}" -nt "${DYLIB_SYMBOL_FILE}" ] ; then
+  "${BREAKPAD_DUMP_SYMS}" -a i386 "${UNSTRIPPED_DYLIB}" > "${DYLIB_SYMBOL_FILE}"
+fi
+DYLIB_DSYM_NAME="${SRC_DYLIB_NAME}.framework.dSYM"
 
-  # Push the .dSYM bundle onto the DSYMS array so that it will be included in
-  # the .dSYM archive if a new one is needed
-  DSYMS[${#DSYMS[@]}]="${DSYM_NAME}"
-done
+DSYM_TAR_PATH="${BUILT_PRODUCTS_DIR}/${APP_DSYM_NAME}.tar.bz2"
 
-# Create the archive of .dSYM bundles.
-if [ ! -e "${DSYM_TAR_PATH}" ] ; then
-  # Change directory so that absolute paths aren't included in the archive.
+# Make a .tar.bz2 out of the .dSYM
+if [ "${BUILT_PRODUCTS_DIR}/${APP_DSYM_NAME}" -nt "${DSYM_TAR_PATH}" ] ||
+   [ "${BUILT_PRODUCTS_DIR}/${DYLIB_DSYM_NAME}" -nt "${DSYM_TAR_PATH}" ] ; then
+  # Change directory so when building the tar, we don't include the build dir
+  # in the tar paths.
   (cd "${BUILT_PRODUCTS_DIR}" &&
-   tar --owner 0 --group 0 -jcf "${DSYM_TAR_PATH}" "${DSYMS[@]}")
+   tar -jcf "${DSYM_TAR_PATH}" "${APP_DSYM_NAME}" "${DYLIB_DSYM_NAME}")
 fi
diff --git a/build/mac/tweak_app_infoplist b/build/mac/tweak_app_infoplist
index 120c3c8..845fc7e 100755
--- a/build/mac/tweak_app_infoplist
+++ b/build/mac/tweak_app_infoplist
@@ -9,9 +9,8 @@ set -e
 # Pull off the optional args
 USE_BREAKPAD=0
 USE_KEYSTONE=0
-USE_SVN=1
 OPTERR=0
-while getopts ":b:k:s:" an_opt ; do
+while getopts ":b:k:" an_opt ; do
   case $an_opt in
     b)
       USE_BREAKPAD=$OPTARG
@@ -19,9 +18,6 @@ while getopts ":b:k:s:" an_opt ; do
     k)
       USE_KEYSTONE=$OPTARG
       ;;
-    s)
-      USE_SVN=$OPTARG
-      ;;
     \?)
       echo "Unknown option $OPTARG"
       exit 1
@@ -38,7 +34,7 @@ while getopts ":b:k:s:" an_opt ; do
 done
 shift $(($OPTIND - 1))
 
-# Make sure the branding argument was supplied.
+# Make sure we got the header to write into passed to us
 if [ $# -ne 1 ]; then
   echo "error: missing branding as an argument" >&2
   exit 1
@@ -49,7 +45,7 @@ fi
 # because:
 #
 # 1. Xcode wants to do the Info.plist work before it runs any build phases,
-#    this means if we were to generate a .h file for INFOPLIST_PREFIX_HEADER
+#    this means if we were to generate a .h file for INFOPLIST_PREFIX_HEADER 
 #    we'd have to put it in another target so it runs in time.
 # 2. Xcode also doesn't check to see if the header being used as a prefix for
 #    the Info.plist has changed.  So even if we updated it, it's only looking
@@ -67,37 +63,23 @@ BRAND_SCRIPT="${TOP}/build/branding_value.sh"
 set -x
 
 APP_NAME=$("${BRAND_SCRIPT}" "${BUILD_BRANDING}" PRODUCT_FULLNAME)
-SRC_APP_PATH="${BUILT_PRODUCTS_DIR}/${WRAPPER_NAME}"
-
-if [ "${USE_SVN}" = "1" ] ; then
-  # Visible in the about:version page.
-  SVN_INFO=$(svn info "${TOP}")
-  SVN_REVISION=$(echo "${SVN_INFO}" | sed -Ene 's/^Revision: (.*)$/\1/p')
-  if [ -z "${SVN_REVISION}" ] ; then
-    echo "Could not determine svn revision.  This may be OK." >&2
-    # TODO: check for git, and get the version number from it?
-  fi
-
-  # Grab the path to the source root in the Subversion repository by taking the
-  # URL to the source root directory and the repository root, and removing the
-  # latter from the former.  This ensures that SVN_PATH will contain a useful
-  # path regardless of the Subversion server, mirror, and authentication scheme
-  # in use.
-  SVN_URL=$(echo "${SVN_INFO}" | sed -Ene 's/^URL: (.*)$/\1/p')
-  SVN_ROOT=$(echo "${SVN_INFO}" | sed -Ene 's/^Repository Root: (.*)$/\1/p')
-  if [ -n "${SVN_ROOT}" ] && \
-     [ "${SVN_URL:0:${#SVN_ROOT}}" = "${SVN_ROOT}" ] ; then
-    SVN_PATH="${SVN_URL:${#SVN_ROOT}}"
-  fi
+SRC_APP_PATH="${BUILT_PRODUCTS_DIR}/${APP_NAME}.app"
+
+# Visible in the about:version page.
+SVN_REVISION=$(svn info "${SRCROOT}" | grep "Revision:" | cut -d" " -f2-)
+if [ -z "${SVN_REVISION}" ] ; then
+  echo "Could not determine svn revision.  This may be OK." >&2
+  # TODO: check for git, and get the version number from it?
 fi
 
-# Pull in the Chrome version number.
+# Pull in the chrome version number
 . "${TOP}/chrome/VERSION"
 FULL_VERSION="${MAJOR}.${MINOR}.${BUILD}.${PATCH}"
+SHORT_VERSION="${MAJOR}.${MINOR}.${BUILD}"
 
-# Fetch the copyright.
+# Fetch the copyright
 COPYRIGHT_STRING=$("${BRAND_SCRIPT}" "${BUILD_BRANDING}" COPYRIGHT)
-# Map (c) or (C) to the copyright symbol.
+# Map (c) or (C) to the copyright sign
 COPYRIGHT_STRING=$(echo "${COPYRIGHT_STRING}" | sed -e $'s/([cC])/\302\251/g')
 
 # Build the full copyright string
@@ -110,25 +92,17 @@ TMP_INFO_PLIST_DEFAULTS="${TEMP_DIR}/Info"
 TMP_INFO_PLIST="${TMP_INFO_PLIST_DEFAULTS}.plist"
 cp "${SRC_APP_PATH}/${INFO_PLIST_PATH}" "${TMP_INFO_PLIST}"
 
-# Save off the Subversion revision number and source root path in case they're
-# needed.
+# Save off the svn version number in case we need it
 if [ ! -z "${SVN_REVISION}" ] ; then
   defaults write "${TMP_INFO_PLIST_DEFAULTS}" \
-      SVNRevision -string "${SVN_REVISION}"
-else
-  defaults delete "${TMP_INFO_PLIST_DEFAULTS}" SVNRevision || true
-fi
-if [ ! -z "${SVN_PATH}" ] ; then
-  defaults write "${TMP_INFO_PLIST_DEFAULTS}" SVNPath -string "${SVN_PATH}"
-else
-  defaults delete "${TMP_INFO_PLIST_DEFAULTS}" SVNPath || true
+    SVNRevision -string "${SVN_REVISION}"
 fi
 
 # Add public version info so "Get Info" works
 defaults write "${TMP_INFO_PLIST_DEFAULTS}" \
     CFBundleGetInfoString -string "${LONG_COPYRIGHT}"
 defaults write "${TMP_INFO_PLIST_DEFAULTS}" \
-    CFBundleShortVersionString -string "${FULL_VERSION}"
+    CFBundleShortVersionString -string "${SHORT_VERSION}"
 # Honor the 429496.72.95 limit.  The maximum comes from splitting 2^32 - 1 into
 # 6, 2, 2 digits.  The limitation was present in Tiger, but it could have been
 # fixed in later OS release, but hasn't been tested (it's easy enough to find
@@ -141,7 +115,7 @@ defaults write "${TMP_INFO_PLIST_DEFAULTS}" \
 defaults write "${TMP_INFO_PLIST_DEFAULTS}" \
     NSHumanReadableCopyright -string "${COPYRIGHT_STRING}"
 
-# Add or remove the Breakpad keys.
+# Add/Remove the breakpad keys
 if [ "${USE_BREAKPAD}" = "1" ] ; then
   defaults write "${TMP_INFO_PLIST_DEFAULTS}" \
       BreakpadURL "https://clients2.google.com/cr/report"
@@ -165,7 +139,7 @@ else
   defaults delete "${TMP_INFO_PLIST_DEFAULTS}" BreakpadSkipConfirm || true
 fi
 
-# Add or remove the Keystone keys (only supported in release builds).
+# Add/Remove keystone keys (only supported in release builds)
 if [ "${USE_KEYSTONE}" = "1" ] && [ "${CONFIGURATION}" = "Release" ] ; then
   KEYSTONE_URL="https://tools.google.com/service/update2"
   KEYSTONE_APP_ID=$(defaults read "${TMP_INFO_PLIST_DEFAULTS}" \
@@ -186,6 +160,3 @@ fi
 # might have done.
 plutil -convert xml1 "${TMP_INFO_PLIST}"
 cp "${TMP_INFO_PLIST}" "${SRC_APP_PATH}/${INFO_PLIST_PATH}"
-
-# Clean up.
-rm -f "${TMP_INFO_PLIST}"
-- 
cgit v1.1