// Copyright 2014 The Chromium Authors. All rights reserved. // Use of this source code is governed by a BSD-style license that can be // found in the LICENSE file. #ifndef BASE_METRICS_HISTOGRAM_MACROS_H_ #define BASE_METRICS_HISTOGRAM_MACROS_H_ #include "base/atomicops.h" #include "base/basictypes.h" #include "base/logging.h" #include "base/metrics/histogram.h" #include "base/time/time.h" //------------------------------------------------------------------------------ // Histograms are often put in areas where they are called many many times, and // performance is critical. As a result, they are designed to have a very low // recurring cost of executing (adding additional samples). Toward that end, // the macros declare a static pointer to the histogram in question, and only // take a "slow path" to construct (or find) the histogram on the first run // through the macro. We leak the histograms at shutdown time so that we don't // have to validate using the pointers at any time during the running of the // process. // The following code is generally what a thread-safe static pointer // initialization looks like for a histogram (after a macro is expanded). This // sample is an expansion (with comments) of the code for // LOCAL_HISTOGRAM_CUSTOM_COUNTS(). /* do { // The pointer's presence indicates the initialization is complete. // Initialization is idempotent, so it can safely be atomically repeated. static base::subtle::AtomicWord atomic_histogram_pointer = 0; // Acquire_Load() ensures that we acquire visibility to the pointed-to data // in the histogram. base::Histogram* histogram_pointer(reinterpret_cast( base::subtle::Acquire_Load(&atomic_histogram_pointer))); if (!histogram_pointer) { // This is the slow path, which will construct OR find the matching // histogram. FactoryGet includes locks on a global histogram name map // and is completely thread safe. histogram_pointer = base::Histogram::FactoryGet( name, min, max, bucket_count, base::HistogramBase::kNoFlags); // Use Release_Store to ensure that the histogram data is made available // globally before we make the pointer visible. // Several threads may perform this store, but the same value will be // stored in all cases (for a given named/spec'ed histogram). // We could do this without any barrier, since FactoryGet entered and // exited a lock after construction, but this barrier makes things clear. base::subtle::Release_Store(&atomic_histogram_pointer, reinterpret_cast(histogram_pointer)); } // Ensure calling contract is upheld, and the name does NOT vary. DCHECK(histogram_pointer->histogram_name() == constant_histogram_name); histogram_pointer->Add(sample); } while (0); */ // The above pattern is repeated in several macros. The only elements that // vary are the invocation of the Add(sample) vs AddTime(sample), and the choice // of which FactoryGet method to use. The different FactoryGet methods have // various argument lists, so the function with its argument list is provided as // a macro argument here. The name is only used in a DCHECK, to assure that // callers don't try to vary the name of the histogram (which would tend to be // ignored by the one-time initialization of the histogtram_pointer). #define STATIC_HISTOGRAM_POINTER_BLOCK(constant_histogram_name, \ histogram_add_method_invocation, \ histogram_factory_get_invocation) \ do { \ static base::subtle::AtomicWord atomic_histogram_pointer = 0; \ base::HistogramBase* histogram_pointer( \ reinterpret_cast( \ base::subtle::Acquire_Load(&atomic_histogram_pointer))); \ if (!histogram_pointer) { \ histogram_pointer = histogram_factory_get_invocation; \ base::subtle::Release_Store( \ &atomic_histogram_pointer, \ reinterpret_cast(histogram_pointer)); \ } \ if (DCHECK_IS_ON()) \ histogram_pointer->CheckName(constant_histogram_name); \ histogram_pointer->histogram_add_method_invocation; \ } while (0) //------------------------------------------------------------------------------ // Provide easy general purpose histogram in a macro, just like stats counters. // The first four macros use 50 buckets. #define LOCAL_HISTOGRAM_TIMES(name, sample) LOCAL_HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(1), \ base::TimeDelta::FromSeconds(10), 50) // For folks that need real specific times, use this to select a precise range // of times you want plotted, and the number of buckets you want used. #define LOCAL_HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, AddTime(sample), \ base::Histogram::FactoryTimeGet(name, min, max, bucket_count, \ base::HistogramBase::kNoFlags)) #define LOCAL_HISTOGRAM_COUNTS(name, sample) LOCAL_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 1000000, 50) #define LOCAL_HISTOGRAM_COUNTS_100(name, sample) \ LOCAL_HISTOGRAM_CUSTOM_COUNTS(name, sample, 1, 100, 50) #define LOCAL_HISTOGRAM_COUNTS_10000(name, sample) \ LOCAL_HISTOGRAM_CUSTOM_COUNTS(name, sample, 1, 10000, 50) #define LOCAL_HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \ base::Histogram::FactoryGet(name, min, max, bucket_count, \ base::HistogramBase::kNoFlags)) // This is a helper macro used by other macros and shouldn't be used directly. #define HISTOGRAM_ENUMERATION_WITH_FLAG(name, sample, boundary, flag) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \ base::LinearHistogram::FactoryGet(name, 1, boundary, boundary + 1, \ flag)) #define LOCAL_HISTOGRAM_PERCENTAGE(name, under_one_hundred) \ LOCAL_HISTOGRAM_ENUMERATION(name, under_one_hundred, 101) #define LOCAL_HISTOGRAM_BOOLEAN(name, sample) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, AddBoolean(sample), \ base::BooleanHistogram::FactoryGet(name, base::Histogram::kNoFlags)) // Support histograming of an enumerated value. The samples should always be // strictly less than |boundary_value| -- this prevents you from running into // problems down the line if you add additional buckets to the histogram. Note // also that, despite explicitly setting the minimum bucket value to |1| below, // it is fine for enumerated histograms to be 0-indexed -- this is because // enumerated histograms should never have underflow. #define LOCAL_HISTOGRAM_ENUMERATION(name, sample, boundary_value) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \ base::LinearHistogram::FactoryGet(name, 1, boundary_value, \ boundary_value + 1, base::HistogramBase::kNoFlags)) // Support histograming of an enumerated value. Samples should be one of the // std::vector list provided via |custom_ranges|. See comments above // CustomRanges::FactoryGet about the requirement of |custom_ranges|. // You can use the helper function CustomHistogram::ArrayToCustomRanges to // transform a C-style array of valid sample values to a std::vector. #define LOCAL_HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \ base::CustomHistogram::FactoryGet(name, custom_ranges, \ base::HistogramBase::kNoFlags)) #define LOCAL_HISTOGRAM_MEMORY_KB(name, sample) LOCAL_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1000, 500000, 50) //------------------------------------------------------------------------------ // The following macros provide typical usage scenarios for callers that wish // to record histogram data, and have the data submitted/uploaded via UMA. // Not all systems support such UMA, but if they do, the following macros // should work with the service. #define UMA_HISTOGRAM_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(1), \ base::TimeDelta::FromSeconds(10), 50) #define UMA_HISTOGRAM_MEDIUM_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(10), \ base::TimeDelta::FromMinutes(3), 50) // Use this macro when times can routinely be much longer than 10 seconds. #define UMA_HISTOGRAM_LONG_TIMES(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(1), \ base::TimeDelta::FromHours(1), 50) // Use this macro when times can routinely be much longer than 10 seconds and // you want 100 buckets. #define UMA_HISTOGRAM_LONG_TIMES_100(name, sample) UMA_HISTOGRAM_CUSTOM_TIMES( \ name, sample, base::TimeDelta::FromMilliseconds(1), \ base::TimeDelta::FromHours(1), 100) #define UMA_HISTOGRAM_CUSTOM_TIMES(name, sample, min, max, bucket_count) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, AddTime(sample), \ base::Histogram::FactoryTimeGet(name, min, max, bucket_count, \ base::HistogramBase::kUmaTargetedHistogramFlag)) #define UMA_HISTOGRAM_COUNTS(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 1000000, 50) #define UMA_HISTOGRAM_COUNTS_100(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 100, 50) #define UMA_HISTOGRAM_COUNTS_10000(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 10000, 50) #define UMA_HISTOGRAM_CUSTOM_COUNTS(name, sample, min, max, bucket_count) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \ base::Histogram::FactoryGet(name, min, max, bucket_count, \ base::HistogramBase::kUmaTargetedHistogramFlag)) #define UMA_HISTOGRAM_MEMORY_KB(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1000, 500000, 50) #define UMA_HISTOGRAM_MEMORY_MB(name, sample) UMA_HISTOGRAM_CUSTOM_COUNTS( \ name, sample, 1, 1000, 50) #define UMA_HISTOGRAM_PERCENTAGE(name, under_one_hundred) \ UMA_HISTOGRAM_ENUMERATION(name, under_one_hundred, 101) #define UMA_HISTOGRAM_BOOLEAN(name, sample) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, AddBoolean(sample), \ base::BooleanHistogram::FactoryGet(name, \ base::HistogramBase::kUmaTargetedHistogramFlag)) // The samples should always be strictly less than |boundary_value|. For more // details, see the comment for the |LOCAL_HISTOGRAM_ENUMERATION| macro, above. #define UMA_HISTOGRAM_ENUMERATION(name, sample, boundary_value) \ HISTOGRAM_ENUMERATION_WITH_FLAG(name, sample, boundary_value, \ base::HistogramBase::kUmaTargetedHistogramFlag) // Similar to UMA_HISTOGRAM_ENUMERATION, but used for recording stability // histograms. Use this if recording a histogram that should be part of the // initial stability log. #define UMA_STABILITY_HISTOGRAM_ENUMERATION(name, sample, boundary_value) \ HISTOGRAM_ENUMERATION_WITH_FLAG(name, sample, boundary_value, \ base::HistogramBase::kUmaStabilityHistogramFlag) #define UMA_HISTOGRAM_CUSTOM_ENUMERATION(name, sample, custom_ranges) \ STATIC_HISTOGRAM_POINTER_BLOCK(name, Add(sample), \ base::CustomHistogram::FactoryGet(name, custom_ranges, \ base::HistogramBase::kUmaTargetedHistogramFlag)) #endif // BASE_METRICS_HISTOGRAM_MACROS_H_