/* Copyright 2013 The Chromium Authors. All rights reserved.
 * Use of this source code is governed by a BSD-style license that can be
 * found in the LICENSE file.
 */

/**
 * This file defines the <code>PPB_TCPSocket</code> interface.
 */

label Chrome {
  M29 = 1.0,
  M31 = 1.1,
  M41 = 1.2
};

/**
 * Option names used by <code>SetOption()</code>.
 */
[assert_size(4)]
enum PP_TCPSocket_Option {
  /**
   * Disables coalescing of small writes to make TCP segments, and instead
   * delivers data immediately. Value's type is <code>PP_VARTYPE_BOOL</code>.
   * On version 1.1 or earlier, this option can only be set after a successful
   * <code>Connect()</code> call. On version 1.2 or later, there is no such
   * limitation.
   */
  PP_TCPSOCKET_OPTION_NO_DELAY = 0,

  /**
   * Specifies the total per-socket buffer space reserved for sends. Value's
   * type should be <code>PP_VARTYPE_INT32</code>.
   * On version 1.1 or earlier, this option can only be set after a successful
   * <code>Connect()</code> call. On version 1.2 or later, there is no such
   * limitation.
   *
   * Note: This is only treated as a hint for the browser to set the buffer
   * size. Even if <code>SetOption()</code> succeeds, the browser doesn't
   * guarantee it will conform to the size.
   */
  PP_TCPSOCKET_OPTION_SEND_BUFFER_SIZE = 1,

  /**
   * Specifies the total per-socket buffer space reserved for receives. Value's
   * type should be <code>PP_VARTYPE_INT32</code>.
   * On version 1.1 or earlier, this option can only be set after a successful
   * <code>Connect()</code> call. On version 1.2 or later, there is no such
   * limitation.
   *
   * Note: This is only treated as a hint for the browser to set the buffer
   * size. Even if <code>SetOption()</code> succeeds, the browser doesn't
   * guarantee it will conform to the size.
   */
  PP_TCPSOCKET_OPTION_RECV_BUFFER_SIZE = 2
};

/**
 * The <code>PPB_TCPSocket</code> interface provides TCP socket operations.
 *
 * Permissions: Apps permission <code>socket</code> with subrule
 * <code>tcp-connect</code> is required for <code>Connect()</code>; subrule
 * <code>tcp-listen</code> is required for <code>Listen()</code>.
 * For more details about network communication permissions, please see:
 * http://developer.chrome.com/apps/app_network.html
 */
interface PPB_TCPSocket {
  /**
   * Creates a TCP socket resource.
   *
   * @param[in] instance A <code>PP_Instance</code> identifying one instance of
   * a module.
   *
   * @return A <code>PP_Resource</code> corresponding to a TCP socket or 0
   * on failure.
   */
  PP_Resource Create([in] PP_Instance instance);

  /**
   * Determines if a given resource is a TCP socket.
   *
   * @param[in] resource A <code>PP_Resource</code> to check.
   *
   * @return <code>PP_TRUE</code> if the input is a
   * <code>PPB_TCPSocket</code> resource; <code>PP_FALSE</code> otherwise.
   */
  PP_Bool IsTCPSocket([in] PP_Resource resource);

  /**
   * Binds the socket to the given address. The socket must not be bound.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   * @param[in] addr A <code>PPB_NetAddress</code> resource.
   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
   * completion.
   *
   * @return An int32_t containing an error code from <code>pp_errors.h</code>,
   * including (but not limited to):
   * - <code>PP_ERROR_ADDRESS_IN_USE</code>: the address is already in use.
   * - <code>PP_ERROR_ADDRESS_INVALID</code>: the address is invalid.
   */
  [version=1.1]
  int32_t Bind([in] PP_Resource tcp_socket,
               [in] PP_Resource addr,
               [in] PP_CompletionCallback callback);

  /**
   * Connects the socket to the given address. The socket must not be listening.
   * Binding the socket beforehand is optional.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   * @param[in] addr A <code>PPB_NetAddress</code> resource.
   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
   * completion.
   *
   * @return An int32_t containing an error code from <code>pp_errors.h</code>,
   * including (but not limited to):
   * - <code>PP_ERROR_NOACCESS</code>: the caller doesn't have required
   *   permissions.
   * - <code>PP_ERROR_ADDRESS_UNREACHABLE</code>: <code>addr</code> is
   *   unreachable.
   * - <code>PP_ERROR_CONNECTION_REFUSED</code>: the connection attempt was
   *   refused.
   * - <code>PP_ERROR_CONNECTION_FAILED</code>: the connection attempt failed.
   * - <code>PP_ERROR_CONNECTION_TIMEDOUT</code>: the connection attempt timed
   *   out.
   *
   * Since version 1.1, if the socket is listening/connected or has a pending
   * listen/connect request, <code>Connect()</code> will fail without starting a
   * connection attempt; otherwise, any failure during the connection attempt
   * will cause the socket to be closed.
   */
  int32_t Connect([in] PP_Resource tcp_socket,
                  [in] PP_Resource addr,
                  [in] PP_CompletionCallback callback);

  /**
   * Gets the local address of the socket, if it is bound.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   *
   * @return A <code>PPB_NetAddress</code> resource on success or 0 on failure.
   */
  PP_Resource GetLocalAddress([in] PP_Resource tcp_socket);

  /**
   * Gets the remote address of the socket, if it is connected.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   *
   * @return A <code>PPB_NetAddress</code> resource on success or 0 on failure.
   */
  PP_Resource GetRemoteAddress([in] PP_Resource tcp_socket);

  /**
   * Reads data from the socket. The socket must be connected. It may perform a
   * partial read.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   * @param[out] buffer The buffer to store the received data on success. It
   * must be at least as large as <code>bytes_to_read</code>.
   * @param[in] bytes_to_read The number of bytes to read.
   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
   * completion.
   *
   * @return A non-negative number on success to indicate how many bytes have
   * been read, 0 means that end-of-file was reached; otherwise, an error code
   * from <code>pp_errors.h</code>.
   */
  int32_t Read([in] PP_Resource tcp_socket,
               [out] str_t buffer,
               [in] int32_t bytes_to_read,
               [in] PP_CompletionCallback callback);

  /**
   * Writes data to the socket. The socket must be connected. It may perform a
   * partial write.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   * @param[in] buffer The buffer containing the data to write.
   * @param[in] bytes_to_write The number of bytes to write.
   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
   * completion.
   *
   * @return A non-negative number on success to indicate how many bytes have
   * been written; otherwise, an error code from <code>pp_errors.h</code>.
   */
  int32_t Write([in] PP_Resource tcp_socket,
                [in] str_t buffer,
                [in] int32_t bytes_to_write,
                [in] PP_CompletionCallback callback);
  /**
   * Starts listening. The socket must be bound and not connected.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   * @param[in] backlog A hint to determine the maximum length to which the
   * queue of pending connections may grow.
   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
   * completion.
   *
   * @return An int32_t containing an error code from <code>pp_errors.h</code>,
   * including (but not limited to):
   * - <code>PP_ERROR_NOACCESS</code>: the caller doesn't have required
   *   permissions.
   * - <code>PP_ERROR_ADDRESS_IN_USE</code>: Another socket is already listening
   *   on the same port.
   */
  [version=1.1]
  int32_t Listen([in] PP_Resource tcp_socket,
                 [in] int32_t backlog,
                 [in] PP_CompletionCallback callback);

  /**
   * Accepts a connection. The socket must be listening.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   * @param[out] accepted_tcp_socket Stores the accepted TCP socket on success.
   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
   * completion.
   *
   * @return An int32_t containing an error code from <code>pp_errors.h</code>,
   * including (but not limited to):
   * - <code>PP_ERROR_CONNECTION_ABORTED</code>: A connection has been aborted.
   */
  [version=1.1]
  int32_t Accept([in] PP_Resource tcp_socket,
                 [out] PP_Resource accepted_tcp_socket,
                 [in] PP_CompletionCallback callback);

  /**
   * Cancels all pending operations and closes the socket. Any pending callbacks
   * will still run, reporting <code>PP_ERROR_ABORTED</code> if pending IO was
   * interrupted. After a call to this method, no output buffer pointers passed
   * into previous <code>Read()</code> or <code>Accept()</code> calls will be
   * accessed. It is not valid to call <code>Connect()</code> or
   * <code>Listen()</code> again.
   *
   * The socket is implicitly closed if it is destroyed, so you are not required
   * to call this method.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   */
  void Close([in] PP_Resource tcp_socket);

  /**
   * Sets a socket option on the TCP socket.
   * Please see the <code>PP_TCPSocket_Option</code> description for option
   * names, value types and allowed values.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   * @param[in] name The option to set.
   * @param[in] value The option value to set.
   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
   * completion.
   *
   * @return An int32_t containing an error code from <code>pp_errors.h</code>.
   */
  int32_t SetOption([in] PP_Resource tcp_socket,
                    [in] PP_TCPSocket_Option name,
                    [in] PP_Var value,
                    [in] PP_CompletionCallback callback);

  /**
   * Sets a socket option on the TCP socket.
   * Please see the <code>PP_TCPSocket_Option</code> description for option
   * names, value types and allowed values.
   *
   * @param[in] tcp_socket A <code>PP_Resource</code> corresponding to a TCP
   * socket.
   * @param[in] name The option to set.
   * @param[in] value The option value to set.
   * @param[in] callback A <code>PP_CompletionCallback</code> to be called upon
   * completion.
   *
   * @return An int32_t containing an error code from <code>pp_errors.h</code>.
   */
  [version=1.2]
  int32_t SetOption([in] PP_Resource tcp_socket,
                    [in] PP_TCPSocket_Option name,
                    [in] PP_Var value,
                    [in] PP_CompletionCallback callback);
};