/* Copyright (c) 2012 The Chromium Authors. All rights reserved.
* Use of this source code is governed by a BSD-style license that can be
* found in the LICENSE file.
*/
/* From dev/ppb_video_capture_dev.idl modified Wed Feb 15 12:15:46 2012. */
#ifndef PPAPI_C_DEV_PPB_VIDEO_CAPTURE_DEV_H_
#define PPAPI_C_DEV_PPB_VIDEO_CAPTURE_DEV_H_
#include "ppapi/c/dev/pp_video_capture_dev.h"
#include "ppapi/c/pp_bool.h"
#include "ppapi/c/pp_completion_callback.h"
#include "ppapi/c/pp_instance.h"
#include "ppapi/c/pp_macros.h"
#include "ppapi/c/pp_resource.h"
#include "ppapi/c/pp_stdint.h"
#define PPB_VIDEOCAPTURE_DEV_INTERFACE_0_1 "PPB_VideoCapture(Dev);0.1"
#define PPB_VIDEOCAPTURE_DEV_INTERFACE_0_2 "PPB_VideoCapture(Dev);0.2"
#define PPB_VIDEOCAPTURE_DEV_INTERFACE PPB_VIDEOCAPTURE_DEV_INTERFACE_0_2
/**
* @file
* This file defines the <code>PPB_VideoCapture_Dev</code> interface.
*/
/**
* @addtogroup Interfaces
* @{
*/
/**
* Video capture interface. It goes hand-in-hand with PPP_VideoCapture_Dev.
*
* Theory of operation:
* 1- Create a VideoCapture resource using Create.
* 2- Find available video capture devices using EnumerateDevices.
* 3- Open a video capture device. In addition to a device reference (0 can be
* used to indicate the default device), you pass in the requested info
* (resolution, frame rate), as well as suggest a number of buffers you will
* need.
* 4- Start the capture using StartCapture.
* 5- Receive the OnDeviceInfo callback, in PPP_VideoCapture_Dev, which will
* give you the actual capture info (the requested one is not guaranteed), as
* well as an array of buffers allocated by the browser.
* 6- On every frame captured by the browser, OnBufferReady (in
* PPP_VideoCapture_Dev) is called with the index of the buffer from the array
* containing the new frame. The buffer is now "owned" by the plugin, and the
* browser won't reuse it until ReuseBuffer is called.
* 7- When the plugin is done with the buffer, call ReuseBuffer.
* 8- Stop the capture using StopCapture.
* 9- Close the device.
*
* The browser may change the resolution based on the constraints of the system,
* in which case OnDeviceInfo will be called again, with new buffers.
*
* The buffers contain the pixel data for a frame. The format is planar YUV
* 4:2:0, one byte per pixel, tightly packed (width x height Y values, then
* width/2 x height/2 U values, then width/2 x height/2 V values).
*/
struct PPB_VideoCapture_Dev_0_2 {
/**
* Creates a new VideoCapture.
*/
PP_Resource (*Create)(PP_Instance instance);
/**
* Returns PP_TRUE if the given resource is a VideoCapture.
*/
PP_Bool (*IsVideoCapture)(PP_Resource video_capture);
/**
* Enumerates video capture devices. Once the operation is completed
* successfully, |devices| will be set to a PPB_ResourceArray_Dev resource,
* which holds a list of PPB_DeviceRef_Dev resources.
*
* Please note that:
* - this method ignores the previous value pointed to by |devices| (won't
* release reference even if it is not 0);
* - |devices| must be valid until |callback| is called, if the method
* returns PP_OK_COMPLETIONPENDING;
* - the ref count of the returned |devices| has already been increased by 1
* for the caller.
*/
int32_t (*EnumerateDevices)(PP_Resource video_capture,
PP_Resource* devices,
struct PP_CompletionCallback callback);
/**
* Opens a video capture device. |device_ref| identifies a video capture
* device. It could be one of the resource in the array returned by
* |EnumerateDevices()|, or 0 which means the default device.
* |requested_info| is a pointer to a structure containing the requested
* resolution and frame rate. |buffer_count| is the number of buffers
* requested by the plugin. Note: it is only used as advisory, the browser may
* allocate more or fewer based on available resources. How many buffers
* depends on usage. At least 2 to make sure latency doesn't cause lost
* frames. If the plugin expects to hold on to more than one buffer at a time
* (e.g. to do multi-frame processing, like video encoding), it should request
* that many more.
*/
int32_t (*Open)(PP_Resource video_capture,
PP_Resource device_ref,
const struct PP_VideoCaptureDeviceInfo_Dev* requested_info,
uint32_t buffer_count,
struct PP_CompletionCallback callback);
/**
* Starts the capture.
*
* Returns PP_ERROR_FAILED if called when the capture was already started, or
* PP_OK on success.
*/
int32_t (*StartCapture)(PP_Resource video_capture);
/**
* Allows the browser to reuse a buffer that was previously sent by
* PPP_VideoCapture_Dev.OnBufferReady. |buffer| is the index of the buffer in
* the array returned by PPP_VideoCapture_Dev.OnDeviceInfo.
*
* Returns PP_ERROR_BADARGUMENT if buffer is out of range (greater than the
* number of buffers returned by PPP_VideoCapture_Dev.OnDeviceInfo), or if it
* is not currently owned by the plugin. Returns PP_OK otherwise.
*/
int32_t (*ReuseBuffer)(PP_Resource video_capture, uint32_t buffer);
/**
* Stops the capture.
*
* Returns PP_ERROR_FAILED if the capture wasn't already started, or PP_OK on
* success.
*/
int32_t (*StopCapture)(PP_Resource video_capture);
/**
* Closes the video capture device, and stops capturing if necessary. It is
* not valid to call |Open()| again after a call to this method.
* If a video capture resource is destroyed while a device is still open, then
* it will be implicitly closed, so you are not required to call this method.
*/
void (*Close)(PP_Resource video_capture);
};
typedef struct PPB_VideoCapture_Dev_0_2 PPB_VideoCapture_Dev;
struct PPB_VideoCapture_Dev_0_1 {
PP_Resource (*Create)(PP_Instance instance);
PP_Bool (*IsVideoCapture)(PP_Resource video_capture);
int32_t (*StartCapture)(
PP_Resource video_capture,
const struct PP_VideoCaptureDeviceInfo_Dev* requested_info,
uint32_t buffer_count);
int32_t (*ReuseBuffer)(PP_Resource video_capture, uint32_t buffer);
int32_t (*StopCapture)(PP_Resource video_capture);
};
/**
* @}
*/
#endif /* PPAPI_C_DEV_PPB_VIDEO_CAPTURE_DEV_H_ */