path: root/app/gfx/codec/jpeg_codec.cc

// Copyright (c) 2006-2008 The Chromium Authors. All rights reserved.
// Use of this source code is governed by a BSD-style license that can be
// found in the LICENSE file.

#include "app/gfx/codec/jpeg_codec.h"

#include <setjmp.h>

#include "base/logging.h"
#include "base/scoped_ptr.h"
#include "third_party/skia/include/core/SkBitmap.h"

extern "C" {
#if defined(USE_SYSTEM_LIBJPEG)
#include <jpeglib.h>
#else
#include "third_party/libjpeg/jpeglib.h"
#endif
}

namespace gfx {

// Encoder/decoder shared stuff ------------------------------------------------

namespace {

// used to pass error info through the JPEG library
struct CoderErrorMgr {
  jpeg_error_mgr pub;
  jmp_buf setjmp_buffer;
};

void ErrorExit(jpeg_common_struct* cinfo) {
  CoderErrorMgr *err = reinterpret_cast<CoderErrorMgr*>(cinfo->err);

  // Return control to the setjmp point.
  longjmp(err->setjmp_buffer, false);
}

}  // namespace

// Encoder ---------------------------------------------------------------------
//
// This code is based on nsJPEGEncoder from Mozilla.
// Copyright 2005 Google Inc. (Brett Wilson, contributor)

namespace {

// Initial size for the output buffer in the JpegEncoderState below.
static const int initial_output_buffer_size = 8192;

struct JpegEncoderState {
  explicit JpegEncoderState(std::vector<unsigned char>* o)
      : out(o),
        image_buffer_used(0) {
  }

  // Output buffer, of which 'image_buffer_used' bytes are actually used (this
  // will often be less than the actual size of the vector because we size it
  // so that libjpeg can write directly into it.
  std::vector<unsigned char>* out;

  // Number of bytes in the 'out' buffer that are actually used (see above).
  size_t image_buffer_used;
};

// Initializes the JpegEncoderState for encoding, and tells libjpeg about where
// the output buffer is.
//
// From the JPEG library:
//  "Initialize destination. This is called by jpeg_start_compress() before
//   any data is actually written. It must initialize next_output_byte and
//   free_in_buffer. free_in_buffer must be initialized to a positive value."
void InitDestination(jpeg_compress_struct* cinfo) {
  JpegEncoderState* state = static_cast<JpegEncoderState*>(cinfo->client_data);
  DCHECK(state->image_buffer_used == 0) << "initializing after use";

  state->out->resize(initial_output_buffer_size);
  state->image_buffer_used = 0;

  cinfo->dest->next_output_byte = &(*state->out)[0];
  cinfo->dest->free_in_buffer = initial_output_buffer_size;
}

// Resize the buffer that we give to libjpeg and update our and its state.
//
// From the JPEG library:
//  "Callback used by libjpeg whenever the buffer has filled (free_in_buffer
//   reaches zero). In typical applications, it should write out the *entire*
//   buffer (use the saved start address and buffer length; ignore the current
//   state of next_output_byte and free_in_buffer). Then reset the pointer &
//   count to the start of the buffer, and return TRUE indicating that the
//   buffer has been dumped. free_in_buffer must be set to a positive value
//   when TRUE is returned. A FALSE return should only be used when I/O
//   suspension is desired (this operating mode is discussed in the next
//   section)."
boolean EmptyOutputBuffer(jpeg_compress_struct* cinfo) {
  JpegEncoderState* state = static_cast<JpegEncoderState*>(cinfo->client_data);

  // note the new size, the buffer is full
  state->image_buffer_used = state->out->size();

  // expand buffer, just double size each time
  state->out->resize(state->out->size() * 2);

  // tell libjpeg where to write the next data
  cinfo->dest->next_output_byte = &(*state->out)[state->image_buffer_used];
  cinfo->dest->free_in_buffer = state->out->size() - state->image_buffer_used;
  return 1;
}

// Cleans up the JpegEncoderState to prepare for returning in the final form.
//
// From the JPEG library:
//  "Terminate destination --- called by jpeg_finish_compress() after all data
//   has been written. In most applications, this must flush any data
//   remaining in the buffer. Use either next_output_byte or free_in_buffer to
//   determine how much data is in the buffer."
void TermDestination(jpeg_compress_struct* cinfo) {
  JpegEncoderState* state = static_cast<JpegEncoderState*>(cinfo->client_data);
  DCHECK(state->out->size() >= state->image_buffer_used);

  // update the used byte based on the next byte libjpeg would write to
  state->image_buffer_used = cinfo->dest->next_output_byte - &(*state->out)[0];
  DCHECK(state->image_buffer_used < state->out->size()) <<
    "JPEG library busted, got a bad image buffer size";

  // update our buffer so that it exactly encompases the desired data
  state->out->resize(state->image_buffer_used);
}

// Converts RGBA to RGB (removing the alpha values) to prepare to send data to
// libjpeg. This converts one row of data in rgba with the given width in
// pixels the the given rgb destination buffer (which should have enough space
// reserved for the final data).
void StripAlpha(const unsigned char* rgba, int pixel_width, unsigned char* rgb)
{
  for (int x = 0; x < pixel_width; x++) {
    const unsigned char* pixel_in = &rgba[x * 4];
    unsigned char* pixel_out = &rgb[x * 3];
    pixel_out[0] = pixel_in[0];
    pixel_out[1] = pixel_in[1];
    pixel_out[2] = pixel_in[2];
  }
}

// Converts BGRA to RGB by reordering the color components and dropping the
// alpha. This converts  one row of data in rgba with the given width in
// pixels the the given rgb destination buffer (which should have enough space
// reserved for the final data).
void BGRAtoRGB(const unsigned char* bgra, int pixel_width, unsigned char* rgb)
{
  for (int x = 0; x < pixel_width; x++) {
    const unsigned char* pixel_in = &bgra[x * 4];
    unsigned char* pixel_out = &rgb[x * 3];
    pixel_out[0] = pixel_in[2];
    pixel_out[1] = pixel_in[1];
    pixel_out[2] = pixel_in[0];
  }
}

// This class destroys the given jpeg_compress object when it goes out of
// scope. It simplifies the error handling in Encode (and even applies to the
// success case).
class CompressDestroyer {
 public:
  CompressDestroyer() : cinfo_(NULL) {
  }
  ~CompressDestroyer() {
    DestroyManagedObject();
  }
  void SetManagedObject(jpeg_compress_struct* ci) {
    DestroyManagedObject();
    cinfo_ = ci;
  }
  void DestroyManagedObject() {
    if (cinfo_) {
      jpeg_destroy_compress(cinfo_);
      cinfo_ = NULL;
    }
  }
 private:
  jpeg_compress_struct* cinfo_;
};

}  // namespace

bool JPEGCodec::Encode(const unsigned char* input, ColorFormat format,
                       int w, int h, int row_byte_width,
                       int quality, std::vector<unsigned char>* output) {
  jpeg_compress_struct cinfo;
  CompressDestroyer destroyer;
  destroyer.SetManagedObject(&cinfo);
  output->clear();

  // We set up the normal JPEG error routines, then override error_exit.
  // This must be done before the call to create_compress.
  CoderErrorMgr errmgr;
  cinfo.err = jpeg_std_error(&errmgr.pub);
  errmgr.pub.error_exit = ErrorExit;
  // Establish the setjmp return context for ErrorExit to use.
  if (setjmp(errmgr.setjmp_buffer)) {
    // If we get here, the JPEG code has signaled an error.
    // MSDN notes: "if you intend your code to be portable, do not rely on
    // correct destruction of frame-based objects when executing a nonlocal
    // goto using a call to longjmp."  So we delete the CompressDestroyer's
    // object manually instead.
    destroyer.DestroyManagedObject();
    return false;
  }

  // The destroyer will destroy() cinfo on exit.
  jpeg_create_compress(&cinfo);

  cinfo.image_width = w;
  cinfo.image_height = h;
  cinfo.input_components = 3;
  cinfo.in_color_space = JCS_RGB;
  cinfo.data_precision = 8;

  jpeg_set_defaults(&cinfo);
  jpeg_set_quality(&cinfo, quality, 1);  // quality here is 0-100

  // set up the destination manager
  jpeg_destination_mgr destmgr;
  destmgr.init_destination = InitDestination;
  destmgr.empty_output_buffer = EmptyOutputBuffer;
  destmgr.term_destination = TermDestination;
  cinfo.dest = &destmgr;

  JpegEncoderState state(output);
  cinfo.client_data = &state;

  jpeg_start_compress(&cinfo, 1);

  // feed it the rows, doing necessary conversions for the color format
  if (format == FORMAT_RGB) {
    // no conversion necessary
    while (cinfo.next_scanline < cinfo.image_height) {
      const unsigned char* row = &input[cinfo.next_scanline * row_byte_width];
      jpeg_write_scanlines(&cinfo, const_cast<unsigned char**>(&row), 1);
    }
  } else {
    // get the correct format converter
    void (*converter)(const unsigned char* in, int w, unsigned char* rgb);
    if (format == FORMAT_RGBA) {
      converter = StripAlpha;
    } else if (format == FORMAT_BGRA) {
      converter = BGRAtoRGB;
    } else {
      NOTREACHED() << "Invalid pixel format";
      return false;
    }

    // output row after converting
    unsigned char* row = new unsigned char[w * 3];

    while (cinfo.next_scanline < cinfo.image_height) {
      converter(&input[cinfo.next_scanline * row_byte_width], w, row);
      jpeg_write_scanlines(&cinfo, &row, 1);
    }
    delete[] row;
  }

  jpeg_finish_compress(&cinfo);
  return true;
}

// Decoder --------------------------------------------------------------------

namespace {

struct JpegDecoderState {
  JpegDecoderState(const unsigned char* in, size_t len)
      : input_buffer(in), input_buffer_length(len) {
  }

  const unsigned char* input_buffer;
  size_t input_buffer_length;
};

// Callback to initialize the source.
//
// From the JPEG library:
//  "Initialize source. This is called by jpeg_read_header() before any data is
//   actually read. May leave bytes_in_buffer set to 0 (in which case a
//   fill_input_buffer() call will occur immediately)."
void InitSource(j_decompress_ptr cinfo) {
  JpegDecoderState* state = static_cast<JpegDecoderState*>(cinfo->client_data);
  cinfo->src->next_input_byte = state->input_buffer;
  cinfo->src->bytes_in_buffer = state->input_buffer_length;
}

// Callback to fill the buffer. Since our buffer already contains all the data,
// we should never need to provide more data. If libjpeg thinks it needs more
// data, our input is probably corrupt.
//
// From the JPEG library:
//  "This is called whenever bytes_in_buffer has reached zero and more data is
//   wanted. In typical applications, it should read fresh data into the buffer
//   (ignoring the current state of next_input_byte and bytes_in_buffer), reset
//   the pointer & count to the start of the buffer, and return TRUE indicating
//   that the buffer has been reloaded. It is not necessary to fill the buffer
//   entirely, only to obtain at least one more byte. bytes_in_buffer MUST be
//   set to a positive value if TRUE is returned. A FALSE return should only
//   be used when I/O suspension is desired."
boolean FillInputBuffer(j_decompress_ptr cinfo) {
  return false;
}

// Skip data in the buffer. Since we have all the data at once, this operation
// is easy. It is not clear if this ever gets called because the JPEG library
// should be able to do the skip itself (it has all the data).
//
// From the JPEG library:
//  "Skip num_bytes worth of data. The buffer pointer and count should be
//   advanced over num_bytes input bytes, refilling the buffer as needed. This
//   is used to skip over a potentially large amount of uninteresting data
//   (such as an APPn marker). In some applications it may be possible to
//   optimize away the reading of the skipped data, but it's not clear that
//   being smart is worth much trouble; large skips are uncommon.
//   bytes_in_buffer may be zero on return. A zero or negative skip count
//   should be treated as a no-op."
void SkipInputData(j_decompress_ptr cinfo, long num_bytes) {
  if (num_bytes > static_cast<long>(cinfo->src->bytes_in_buffer)) {
    // Since all our data should be in the buffer, trying to skip beyond it
    // means that there is some kind of error or corrupt input data. A 0 for
    // bytes left means it will call FillInputBuffer which will then fail.
    cinfo->src->next_input_byte += cinfo->src->bytes_in_buffer;
    cinfo->src->bytes_in_buffer = 0;
  } else if (num_bytes > 0) {
    cinfo->src->bytes_in_buffer -= static_cast<size_t>(num_bytes);
    cinfo->src->next_input_byte += num_bytes;
  }
}

// Our source doesn't need any cleanup, so this is a NOP.
//
// From the JPEG library:
//  "Terminate source --- called by jpeg_finish_decompress() after all data has
//   been read to clean up JPEG source manager. NOT called by jpeg_abort() or
//   jpeg_destroy()."
void TermSource(j_decompress_ptr cinfo) {
}

// Converts one row of rgb data to rgba data by adding a fully-opaque alpha
// value.
void AddAlpha(const unsigned char* rgb, int pixel_width, unsigned char* rgba) {
  for (int x = 0; x < pixel_width; x++) {
    const unsigned char* pixel_in = &rgb[x * 3];
    unsigned char* pixel_out = &rgba[x * 4];
    pixel_out[0] = pixel_in[0];
    pixel_out[1] = pixel_in[1];
    pixel_out[2] = pixel_in[2];
    pixel_out[3] = 0xff;
  }
}

// Converts one row of RGB data to BGRA by reordering the color components and
// adding alpha values of 0xff.
void RGBtoBGRA(const unsigned char* bgra, int pixel_width, unsigned char* rgb)
{
  for (int x = 0; x < pixel_width; x++) {
    const unsigned char* pixel_in = &bgra[x * 3];
    unsigned char* pixel_out = &rgb[x * 4];
    pixel_out[0] = pixel_in[2];
    pixel_out[1] = pixel_in[1];
    pixel_out[2] = pixel_in[0];
    pixel_out[3] = 0xff;
  }
}

// This class destroys the given jpeg_decompress object when it goes out of
// scope. It simplifies the error handling in Decode (and even applies to the
// success case).
class DecompressDestroyer {
 public:
  DecompressDestroyer() : cinfo_(NULL) {
  }
  ~DecompressDestroyer() {
    DestroyManagedObject();
  }
  void SetManagedObject(jpeg_decompress_struct* ci) {
    DestroyManagedObject();
    cinfo_ = ci;
  }
  void DestroyManagedObject() {
    if (cinfo_) {
      jpeg_destroy_decompress(cinfo_);
      cinfo_ = NULL;
    }
  }
 private:
  jpeg_decompress_struct* cinfo_;
};

}  // namespace

bool JPEGCodec::Decode(const unsigned char* input, size_t input_size,
                       ColorFormat format, std::vector<unsigned char>* output,
                       int* w, int* h) {
  jpeg_decompress_struct cinfo;
  DecompressDestroyer destroyer;
  destroyer.SetManagedObject(&cinfo);
  output->clear();

  // We set up the normal JPEG error routines, then override error_exit.
  // This must be done before the call to create_decompress.
  CoderErrorMgr errmgr;
  cinfo.err = jpeg_std_error(&errmgr.pub);
  errmgr.pub.error_exit = ErrorExit;
  // Establish the setjmp return context for ErrorExit to use.
  if (setjmp(errmgr.setjmp_buffer)) {
    // If we get here, the JPEG code has signaled an error.
    // See note in JPEGCodec::Encode() for why we need to destroy the cinfo
    // manually here.
    destroyer.DestroyManagedObject();
    return false;
  }

  // The destroyer will destroy() cinfo on exit.  We don't want to set the
  // destroyer's object until cinfo is initialized.
  jpeg_create_decompress(&cinfo);

  // set up the source manager
  jpeg_source_mgr srcmgr;
  srcmgr.init_source = InitSource;
  srcmgr.fill_input_buffer = FillInputBuffer;
  srcmgr.skip_input_data = SkipInputData;
  srcmgr.resync_to_restart = jpeg_resync_to_restart;  // use default routine
  srcmgr.term_source = TermSource;
  cinfo.src = &srcmgr;

  JpegDecoderState state(input, input_size);
  cinfo.client_data = &state;

  // fill the file metadata into our buffer
  if (jpeg_read_header(&cinfo, true) != JPEG_HEADER_OK)
    return false;

  // we want to always get RGB data out
  switch (cinfo.jpeg_color_space) {
    case JCS_GRAYSCALE:
    case JCS_RGB:
    case JCS_YCbCr:
      cinfo.out_color_space = JCS_RGB;
      break;
    case JCS_CMYK:
    case JCS_YCCK:
    default:
      // Mozilla errors out on these color spaces, so I presume that the jpeg
      // library can't do automatic color space conversion for them. We don't
      // care about these anyway.
      return false;
  }
  cinfo.output_components = 3;

  jpeg_calc_output_dimensions(&cinfo);
  *w = cinfo.output_width;
  *h = cinfo.output_height;

  jpeg_start_decompress(&cinfo);

  // FIXME(brettw) we may want to allow the capability for callers to request
  // how to align row lengths as we do for the compressor.
  int row_read_stride = cinfo.output_width * cinfo.output_components;

  if (format == FORMAT_RGB) {
    // easy case, row needs no conversion
    int row_write_stride = row_read_stride;
    output->resize(row_write_stride * cinfo.output_height);

    for (int row = 0; row < static_cast<int>(cinfo.output_height); row++) {
      unsigned char* rowptr = &(*output)[row * row_write_stride];
      if (!jpeg_read_scanlines(&cinfo, &rowptr, 1))
        return false;
    }
  } else {
    // Rows need conversion to output format: read into a temporary buffer and
    // expand to the final one. Performance: we could avoid the extra
    // allocation by doing the expansion in-place.
    int row_write_stride;
    void (*converter)(const unsigned char* rgb, int w, unsigned char* out);
    if (format == FORMAT_RGBA) {
      row_write_stride = cinfo.output_width * 4;
      converter = AddAlpha;
    } else if (format == FORMAT_BGRA) {
      row_write_stride = cinfo.output_width * 4;
      converter = RGBtoBGRA;
    } else {
      NOTREACHED() << "Invalid pixel format";
      jpeg_destroy_decompress(&cinfo);
      return false;
    }

    output->resize(row_write_stride * cinfo.output_height);

    scoped_array<unsigned char> row_data(new unsigned char[row_read_stride]);
    unsigned char* rowptr = row_data.get();
    for (int row = 0; row < static_cast<int>(cinfo.output_height); row++) {
      if (!jpeg_read_scanlines(&cinfo, &rowptr, 1))
        return false;
      converter(rowptr, *w, &(*output)[row * row_write_stride]);
    }
  }

  jpeg_finish_decompress(&cinfo);
  jpeg_destroy_decompress(&cinfo);
  return true;
}

// static
SkBitmap* JPEGCodec::Decode(const unsigned char* input, size_t input_size) {
  int w, h;
  std::vector<unsigned char> data_vector;
  // Use FORMAT_BGRA as that maps to Skia's 32 bit (kARGB_8888_Config) format.
  if (!Decode(input, input_size, FORMAT_BGRA, &data_vector, &w, &h))
    return NULL;

  // Skia only handles 32 bit images.
  int data_length = w * h * 4;

  SkBitmap* bitmap = new SkBitmap();
  bitmap->setConfig(SkBitmap::kARGB_8888_Config, w, h);
  bitmap->allocPixels();
  memcpy(bitmap->getAddr32(0, 0), &data_vector[0], data_length);

  return bitmap;
}

}  // namespace gfx