i9300: Overlay bringup

Change-Id: Ica5b5c3035c6e5ff2756564fa3d894ba8a6d24bd

3 files changed, 93 insertions, 43 deletions

diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml
index e0fabe0..7d7cfc7 100644
--- a/overlay/frameworks/base/core/res/res/values/config.xml
+++ b/overlay/frameworks/base/core/res/res/values/config.xml
@@ -134,6 +134,48 @@
         <item>0</item>
     </integer-array>
 
+    <!-- Screen brightness when dozing. -->
+    <integer name="config_screenBrightnessDoze">20</integer>
+
+    <!-- Dream of notifications -->
+    <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string>
+
+    <!-- If true, the doze component is not started until after the screen has been
+         turned off and the screen off animation has been performed. -->
+    <bool name="config_dozeAfterScreenOff">true</bool>
+
+    <!-- Power Management: Specifies whether to decouple the interactive state of the
+         device from the display on/off state.
+
+         When false, setInteractive(..., true) will be called before the display is turned on
+         and setInteractive(..., false) will be called after the display is turned off.
+         This mode provides best compatibility for devices that expect the interactive
+         state to be tied to the display state.
+
+         When true, setInteractive(...) will be called independently of whether the display
+         is being turned on or off.  This mode enables the power manager to reduce
+         clocks and disable the touch controller while the display is on.
+
+         This resource should be set to "true" when a doze component has been specified
+         to maximize power savings but not all devices support it.
+
+         Refer to power.h for details.
+    -->
+    <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool>
+
+    <!-- Specifies whether the dreams feature should be supported.
+         When true, the system will allow the user to configure dreams (screensavers)
+         to launch when a user activity timeout occurs or the system is told to nap.
+         When false, the dreams feature will be disabled (this does not affect dozing).
+
+         Consider setting this resource to false or disabling dreams by default when a
+         doze component is specified below since dreaming will supercede dozing and
+         will prevent the system from entering a low power state until the dream ends. -->
+    <bool name="config_dreamsSupported">true</bool>
+
+    <!-- If supported, are dreams enabled? (by default) -->
+    <bool name="config_dreamsEnabledByDefault">false</bool>
+
     <!-- An Array of "[Connection name],[ConnectivityManager.TYPE_xxxx],
          [associated radio-type],[priority],[restoral-timer(ms)],[dependencyMet]  -->
     <!-- the 5th element "resore-time" indicates the number of milliseconds to delay
@@ -185,10 +227,15 @@
     <!-- Is the notification LED intrusive? Used to decide if there should be a disable option -->
     <bool name="config_intrusiveNotificationLed">true</bool>
 
+    <!-- Does the notification LED support multiple colors?
+         Used to decide if the user can change the colors -->
+    <bool name="config_multiColorNotificationLed">true</bool>
+
     <!-- Is the battery LED intrusive? Used to decide if there should be a disable option -->
     <bool name="config_intrusiveBatteryLed">true</bool>
 
-    <!-- Does the battery LED support multiple colors? Used to decide if the user can change the colors -->
+    <!-- Does the battery LED support multiple colors?
+         Used to decide if the user can change the colors -->
     <bool name="config_multiColorBatteryLed">true</bool>
 
     <!-- Default color for notification LED is white. -->
@@ -207,9 +254,9 @@
     <!--bool name="config_disableHomeUnlockSetting">false</bool-->
 
     <!-- Workaround for devices with broken keyboards -->
-    <bool name="config_forceDisableHardwareKeyboard">true</bool>
+    <!--bool name="config_forceDisableHardwareKeyboard">true</bool-->
 
-    <!-- Hardware 'face' keys present on the device, stored as a bit field.
+    <!-- Hardware keys present on the device, stored as a bit field.
          This integer should equal the sum of the corresponding value for each
          of the following keys present:
              1 - Home
@@ -217,11 +264,47 @@
              4 - Menu
              8 - Assistant (search)
             16 - App switch
+            32 - Camera
+            64 - Volume rocker
          For example, a device with Home, Back and Menu keys would set this
          config to 7. -->
-    <integer name="config_deviceHardwareKeys">7</integer>
+    <integer name="config_deviceHardwareKeys">71</integer>
+
+    <!-- Hardware keys present on the device with the ability to wake, stored as a bit field.
+         This integer should equal the sum of the corresponding value for each
+         of the following keys present:
+             1 - Home
+             2 - Back
+             4 - Menu
+             8 - Assistant (search)
+            16 - App switch
+            32 - Camera
+            64 - Volume rocker
+         For example, a device with Home, Back and Menu keys would set this
+         config to 7. -->
+    <integer name="config_deviceHardwareWakeKeys">65</integer>
 
     <!-- Boolean to enable stk functionality on Samsung phones -->
     <bool name="config_samsung_stk">true</bool>
 
+    <!-- Maximum number of supported users -->
+    <integer name="config_multiuserMaximumUsers">4</integer>
+
+    <!-- Whether UI for multi user should be shown -->
+    <bool name="config_enableMultiUserUI">true</bool>
+
+    <!-- Whether WiFi display is supported by this device.
+         There are many prerequisites for this feature to work correctly.
+         Here are a few of them:
+         * The WiFi radio must support WiFi P2P.
+         * The WiFi radio must support concurrent connections to the WiFi display and
+           to an access point.
+         * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix"
+           remote submix module.  This module is used to record and stream system
+           audio output to the WiFi display encoder in the media server.
+         * The remote submix module "audio.r_submix.default" must be installed on the device.
+         * The device must be provisioned with HDCP keys (for protected content).
+    -->
+    <bool name="config_enableWifiDisplay">true</bool>
+
 </resources>
diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
index 88851f7..717384b 100644
--- a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
+++ b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml
@@ -22,5 +22,11 @@
 <resources>
     <!-- Control whether status bar should distinguish HSPA data icon form UMTS data icon on devices -->
     <bool name="config_hspa_data_distinguishable">true</bool>
+
+    <!-- Doze: does this device support STATE_DOZE and STATE_DOZE_SUSPEND?  -->
+    <bool name="doze_display_state_supported">true</bool>
+
+    <!-- Doze: should the pickup sensor be used as a pulse signal? -->
+    <bool name="doze_pulse_on_pick_up">false</bool>
 </resources>
 
diff --git a/overlay/packages/apps/Torch/res/values/config.xml b/overlay/packages/apps/Torch/res/values/config.xml
deleted file mode 100644
index 4928547..0000000
--- a/overlay/packages/apps/Torch/res/values/config.xml
+++ /dev/null
@@ -1,39 +0,0 @@
-<?xml version="1.0" encoding="utf-8"?>
-<!--
-/*
-** Copyright 2011, The CyanogenMod Project
-**
-** Licensed under the Apache License, Version 2.0 (the "License");
-** you may not use this file except in compliance with the License.
-** You may obtain a copy of the License at
-**
-**     http://www.apache.org/licenses/LICENSE-2.0
-**
-** Unless required by applicable law or agreed to in writing, software
-** distributed under the License is distributed on an "AS IS" BASIS,
-** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-** See the License for the specific language governing permissions and
-** limitations under the License.
-*/
--->
-
-<!-- These resources are around just to allow their values to be customized
-     for different hardware and product builds. -->
-<resources>
-    <!-- If there is no sysfs-based control mechanism, enable this -->
-    <bool name="useCameraInterface">false</bool>
-
-    <!-- Full path to the sysfs toggle -->
-    <string name="flashDevice">/sys/class/camera/rear/rear_flash</string>
-
-    <!-- Lowest setting -->
-    <integer name="valueOn">159</integer>
-    <!-- Middle setting -->
-    <integer name="valueHigh">10</integer>
-    <!-- Highest setting, leave -1 if it doesn't exist -->
-    <integer name="valueDeathRay">1</integer>
-
-    <!-- If the device supports high brightness mode, enable this -->
-    <bool name="hasHighBrightness">true</bool>
-
-</resources>