i9305 : use gps configuration from smdk4412-qcom

Change-Id: If6cfa970fd128b9700206aafc76228fbed02dcc5

2 files changed, 0 insertions, 106 deletions

diff --git a/configs/gps.conf b/configs/gps.conf
deleted file mode 100644
index 6576285..0000000
--- a/configs/gps.conf
+++ /dev/null
@@ -1,102 +0,0 @@
-#Test
-NTP_SERVER=time.gpsonextra.net
-#Asia
-# NTP_SERVER=asia.pool.ntp.org
-#Europe
-# NTP_SERVER=europe.pool.ntp.org
-#North America
-# NTP_SERVER=north-america.pool.ntp.org
-
-XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
-XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
-XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
-
-# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
-#               4 - Debug, 5 - Verbose
-DEBUG_LEVEL = 4
-
-# Intermediate position report, 1=enable, 0=disable
-INTERMEDIATE_POS=0
-
-# supl version 1.0
-SUPL_VER=0x10000
-
-# Error Estimate
-# _SET = 1
-# _CLEAR = 0
-ERR_ESTIMATE=0
-
-# GPS Capabilities bit mask
-# SCHEDULING = 1
-# MSB = 2
-# MSA = 4
-# ULP = 0x20
-# ON_DEMAND_TIME = 0x10 // yunu.lee
-# default = MSA | MSB | SCHEDULING | ULP
-CAPABILITIES=0x16
-
-# Accuracy threshold for intermediate positions
-# less accurate positions are ignored, 0 for passing all positions
-# ACCURACY_THRES=5000
-
-################################
-##### AGPS server settings #####
-################################
-
-# FOR SUPL SUPPORT, set the following
-# SUPL_HOST=supl.host.com or IP
-# SUPL_PORT=1234
-
-# FOR C2K PDE SUPPORT, set the following
-# C2K_HOST=c2k.pde.com or IP
-# C2K_PORT=1234
-
-################################
-# Sensor Settings
-################################
-
-# Needs to be set explicitly based on sensor
-# There is no default value.
-GYRO_BIAS_RANDOM_WALK=0.00001
-
-# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
-SENSOR_ACCEL_BATCHES_PER_SEC=3
-SENSOR_ACCEL_SAMPLES_PER_BATCH=5
-SENSOR_GYRO_BATCHES_PER_SEC=3
-SENSOR_GYRO_SAMPLES_PER_BATCH=5
-# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
-SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
-SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
-SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
-SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
-
-# INS Filter Mode (0=Enable, 1=Disable) 
-SENSOR_ALGORITHM_CONFIG_MASK=1
-
-# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
-SENSOR_CONTROL_MODE=0
-
-# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
-SENSOR_USAGE=0
-
-# Choose GSIFF sensor provider (1=DSPS, 2=Android NDK)
-SENSOR_PROVIDER=2
-
-################################
-# Indoor Positioning Settings
-################################
-# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only
-QUIPC_ENABLED = 0
-
-################################
-# EXTRA SETTINGS
-################################
-# Enable or Disable Wiper (1=Enable, 0=Disable)
-ENABLE_WIPER=0
-
-####################################
-#  LTE Positioning Profile Settings
-####################################
-# 0: Enable RRLP on LTE(Default) 1: Enable LPP_User_Plane on LTE
-LPP_PROFILE = 0
-
diff --git a/i9305.mk b/i9305.mk
index ba9250f..e3d8874 100644
--- a/i9305.mk
+++ b/i9305.mk
@@ -40,10 +40,6 @@ PRODUCT_COPY_FILES += \
 PRODUCT_PACKAGES += \
     camera.smdk4x12
 
-# GPS
-PRODUCT_COPY_FILES += \
-    $(LOCAL_PATH)/configs/gps.conf:system/etc/gps.conf
-
 # Product specific Packages
 PRODUCT_PACKAGES += \
     DeviceSettings