Revert "i9305 : second cleanup"

I'll push single commits

This reverts commit 2f6c7f36412046bd8b67ffbf511ffa74d7cc6842.

Change-Id: I147666b0637e2950612653ad680b7a1f33e173f0

19 files changed, 281 insertions, 5397 deletions

diff --git a/BoardConfig.mk b/BoardConfig.mk
index f5f2f2d..660414c 100644
--- a/BoardConfig.mk
+++ b/BoardConfig.mk
@@ -14,13 +14,11 @@
 # limitations under the License.
 #
 
--include device/samsung/smdk4412-common/BoardCommonConfig.mk
 -include device/samsung/smdk4412-qcom-common/BoardCommonConfig.mk
+-include device/samsung/smdk4412-common/BoardCommonConfig.mk
 
 LOCAL_PATH := device/samsung/i9305
 
-TARGET_SPECIFIC_HEADER_PATH += $(LOCAL_PATH)/include
-
 # Bluetooth
 BOARD_BLUETOOTH_BDROID_BUILDCFG_INCLUDE_DIR := $(LOCAL_PATH)/bluetooth
 
diff --git a/cm.mk b/cm.mk
index 02230f6..8ce223f 100644
--- a/cm.mk
+++ b/cm.mk
@@ -1,3 +1,6 @@
+# Specify phone tech before including full_phone
+$(call inherit-product, vendor/cm/config/gsm.mk)
+
 # Release name
 PRODUCT_RELEASE_NAME := i9305
 
diff --git a/include/telephony/ril.h b/include/telephony/ril.h
deleted file mode 100644
index e13ad9f..0000000
--- a/include/telephony/ril.h
+++ /dev/null
@@ -1,5394 +0,0 @@
-/*
- * Copyright (C) 2006 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- *      http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_RIL_H
-#define ANDROID_RIL_H 1
-
-#include <stdlib.h>
-#include <stdint.h>
-#include <telephony/ril_cdma_sms.h>
-#include <telephony/ril_nv_items.h>
-#include <telephony/ril_msim.h>
-
-#ifndef FEATURE_UNIT_TEST
-#include <sys/time.h>
-#endif /* !FEATURE_UNIT_TEST */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-#if defined(ANDROID_SIM_COUNT_2)
-#define SIM_COUNT 2
-#elif defined(ANDROID_SIM_COUNT_3)
-#define SIM_COUNT 3
-#elif defined(ANDROID_SIM_COUNT_4)
-#define SIM_COUNT 4
-#else
-#define SIM_COUNT 1
-#endif
-
-#ifndef ANDROID_MULTI_SIM
-#define SIM_COUNT 1
-#endif
-
-#define RIL_VERSION 11     /* Current version */
-#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */
-
-#define CDMA_ALPHA_INFO_BUFFER_LENGTH 64
-#define CDMA_NUMBER_INFO_BUFFER_LENGTH 81
-
-#define MAX_RILDS 3
-#define MAX_SOCKET_NAME_LENGTH 6
-#define MAX_CLIENT_ID_LENGTH 2
-#define MAX_DEBUG_SOCKET_NAME_LENGTH 12
-#define MAX_QEMU_PIPE_NAME_LENGTH  11
-#define MAX_UUID_LENGTH 64
-
-
-typedef void * RIL_Token;
-
-typedef enum {
-    RIL_SOCKET_1,
-#if (SIM_COUNT >= 2)
-    RIL_SOCKET_2,
-#if (SIM_COUNT >= 3)
-    RIL_SOCKET_3,
-#endif
-#if (SIM_COUNT >= 4)
-    RIL_SOCKET_4,
-#endif
-#endif
-    RIL_SOCKET_NUM
-} RIL_SOCKET_ID;
-
-
-typedef enum {
-    RIL_E_SUCCESS = 0,
-    RIL_E_RADIO_NOT_AVAILABLE = 1,     /* If radio did not start or is resetting */
-    RIL_E_GENERIC_FAILURE = 2,
-    RIL_E_PASSWORD_INCORRECT = 3,      /* for PIN/PIN2 methods only! */
-    RIL_E_SIM_PIN2 = 4,                /* Operation requires SIM PIN2 to be entered */
-    RIL_E_SIM_PUK2 = 5,                /* Operation requires SIM PIN2 to be entered */
-    RIL_E_REQUEST_NOT_SUPPORTED = 6,
-    RIL_E_CANCELLED = 7,
-    RIL_E_OP_NOT_ALLOWED_DURING_VOICE_CALL = 8, /* data ops are not allowed during voice
-                                                   call on a Class C GPRS device */
-    RIL_E_OP_NOT_ALLOWED_BEFORE_REG_TO_NW = 9,  /* data ops are not allowed before device
-                                                   registers in network */
-    RIL_E_SMS_SEND_FAIL_RETRY = 10,             /* fail to send sms and need retry */
-    RIL_E_SIM_ABSENT = 11,                      /* fail to set the location where CDMA subscription
-                                                   shall be retrieved because of SIM or RUIM
-                                                   card absent */
-    RIL_E_SUBSCRIPTION_NOT_AVAILABLE = 12,      /* fail to find CDMA subscription from specified
-                                                   location */
-    RIL_E_MODE_NOT_SUPPORTED = 13,              /* HW does not support preferred network type */
-    RIL_E_FDN_CHECK_FAILURE = 14,               /* command failed because recipient is not on FDN list */
-    RIL_E_ILLEGAL_SIM_OR_ME = 15,               /* network selection failed due to
-                                                   illegal SIM or ME */
-    RIL_E_MISSING_RESOURCE = 16,                /* no logical channel available */
-    RIL_E_NO_SUCH_ELEMENT = 17,                  /* application not found on SIM */
-    RIL_E_DIAL_MODIFIED_TO_USSD = 18,           /* DIAL request modified to USSD */
-    RIL_E_DIAL_MODIFIED_TO_SS = 19,             /* DIAL request modified to SS */
-    RIL_E_DIAL_MODIFIED_TO_DIAL = 20,           /* DIAL request modified to DIAL with different
-                                                   data */
-    RIL_E_USSD_MODIFIED_TO_DIAL = 21,           /* USSD request modified to DIAL */
-    RIL_E_USSD_MODIFIED_TO_SS = 22,             /* USSD request modified to SS */
-    RIL_E_USSD_MODIFIED_TO_USSD = 23,           /* USSD request modified to different USSD
-                                                   request */
-    RIL_E_SS_MODIFIED_TO_DIAL = 24,             /* SS request modified to DIAL */
-    RIL_E_SS_MODIFIED_TO_USSD = 25,             /* SS request modified to USSD */
-    RIL_E_SUBSCRIPTION_NOT_SUPPORTED = 26,      /* Subscription not supported by RIL */
-    RIL_E_SS_MODIFIED_TO_SS = 27                /* SS request modified to different SS request */
-
-
-} RIL_Errno;
-
-typedef enum {
-    RIL_CALL_ACTIVE = 0,
-    RIL_CALL_HOLDING = 1,
-    RIL_CALL_DIALING = 2,    /* MO call only */
-    RIL_CALL_ALERTING = 3,   /* MO call only */
-    RIL_CALL_INCOMING = 4,   /* MT call only */
-    RIL_CALL_WAITING = 5     /* MT call only */
-} RIL_CallState;
-
-typedef enum {
-    RADIO_STATE_OFF = 0,                   /* Radio explictly powered off (eg CFUN=0) */
-    RADIO_STATE_UNAVAILABLE = 1,           /* Radio unavailable (eg, resetting or not booted) */
-    /* States 2-9 below are deprecated. Just leaving them here for backward compatibility. */
-    RADIO_STATE_SIM_NOT_READY = 2,         /* Radio is on, but the SIM interface is not ready */
-    RADIO_STATE_SIM_LOCKED_OR_ABSENT = 3,  /* SIM PIN locked, PUK required, network
-                                              personalization locked, or SIM absent */
-    RADIO_STATE_SIM_READY = 4,             /* Radio is on and SIM interface is available */
-    RADIO_STATE_RUIM_NOT_READY = 5,        /* Radio is on, but the RUIM interface is not ready */
-    RADIO_STATE_RUIM_READY = 6,            /* Radio is on and the RUIM interface is available */
-    RADIO_STATE_RUIM_LOCKED_OR_ABSENT = 7, /* RUIM PIN locked, PUK required, network
-                                              personalization locked, or RUIM absent */
-    RADIO_STATE_NV_NOT_READY = 8,          /* Radio is on, but the NV interface is not available */
-    RADIO_STATE_NV_READY = 9,              /* Radio is on and the NV interface is available */
-    RADIO_STATE_ON = 10                    /* Radio is on */
-} RIL_RadioState;
-
-typedef enum {
-    RADIO_TECH_UNKNOWN = 0,
-    RADIO_TECH_GPRS = 1,
-    RADIO_TECH_EDGE = 2,
-    RADIO_TECH_UMTS = 3,
-    RADIO_TECH_IS95A = 4,
-    RADIO_TECH_IS95B = 5,
-    RADIO_TECH_1xRTT =  6,
-    RADIO_TECH_EVDO_0 = 7,
-    RADIO_TECH_EVDO_A = 8,
-    RADIO_TECH_HSDPA = 9,
-    RADIO_TECH_HSUPA = 10,
-    RADIO_TECH_HSPA = 11,
-    RADIO_TECH_EVDO_B = 12,
-    RADIO_TECH_EHRPD = 13,
-    RADIO_TECH_LTE = 14,
-    RADIO_TECH_HSPAP = 15, // HSPA+
-    RADIO_TECH_GSM = 16, // Only supports voice
-    RADIO_TECH_TD_SCDMA = 17,
-    RADIO_TECH_IWLAN = 18
-} RIL_RadioTechnology;
-
-typedef enum {
-    RAF_UNKNOWN =  (1 <<  RADIO_TECH_UNKNOWN),
-    RAF_GPRS = (1 << RADIO_TECH_GPRS),
-    RAF_EDGE = (1 << RADIO_TECH_EDGE),
-    RAF_UMTS = (1 << RADIO_TECH_UMTS),
-    RAF_IS95A = (1 << RADIO_TECH_IS95A),
-    RAF_IS95B = (1 << RADIO_TECH_IS95B),
-    RAF_1xRTT = (1 << RADIO_TECH_1xRTT),
-    RAF_EVDO_0 = (1 << RADIO_TECH_EVDO_0),
-    RAF_EVDO_A = (1 << RADIO_TECH_EVDO_A),
-    RAF_HSDPA = (1 << RADIO_TECH_HSDPA),
-    RAF_HSUPA = (1 << RADIO_TECH_HSUPA),
-    RAF_HSPA = (1 << RADIO_TECH_HSPA),
-    RAF_EVDO_B = (1 << RADIO_TECH_EVDO_B),
-    RAF_EHRPD = (1 << RADIO_TECH_EHRPD),
-    RAF_LTE = (1 << RADIO_TECH_LTE),
-    RAF_HSPAP = (1 << RADIO_TECH_HSPAP),
-    RAF_GSM = (1 << RADIO_TECH_GSM),
-    RAF_TD_SCDMA = (1 << RADIO_TECH_TD_SCDMA),
-} RIL_RadioAccessFamily;
-
-typedef enum {
-    RC_PHASE_CONFIGURED = 0,  // LM is configured is initial value and value after FINISH completes
-    RC_PHASE_START      = 1,  // START is sent before Apply and indicates that an APPLY will be
-                              // forthcoming with these same parameters
-    RC_PHASE_APPLY      = 2,  // APPLY is sent after all LM's receive START and returned
-                              // RIL_RadioCapability.status = 0, if any START's fail no
-                              // APPLY will be sent
-    RC_PHASE_UNSOL_RSP  = 3,  // UNSOL_RSP is sent with RIL_UNSOL_RADIO_CAPABILITY
-    RC_PHASE_FINISH     = 4   // FINISH is sent after all commands have completed. If an error
-                              // occurs in any previous command the RIL_RadioAccessesFamily and
-                              // logicalModemUuid fields will be the prior configuration thus
-                              // restoring the configuration to the previous value. An error
-                              // returned by this command will generally be ignored or may
-                              // cause that logical modem to be removed from service.
-} RadioCapabilityPhase;
-
-typedef enum {
-    RC_STATUS_NONE       = 0, // This parameter has no meaning with RC_PHASE_START,
-                              // RC_PHASE_APPLY
-    RC_STATUS_SUCCESS    = 1, // Tell modem the action transaction of set radio
-                              // capability was success with RC_PHASE_FINISH
-    RC_STATUS_FAIL       = 2, // Tell modem the action transaction of set radio
-                              // capability is fail with RC_PHASE_FINISH.
-} RadioCapabilityStatus;
-
-#define RIL_RADIO_CAPABILITY_VERSION 1
-typedef struct {
-    int version;            // Version of structure, RIL_RADIO_CAPABILITY_VERSION
-    int session;            // Unique session value defined by framework returned in all "responses/unsol"
-    int phase;              // CONFIGURED, START, APPLY, FINISH
-    int rat;                // RIL_RadioAccessFamily for the radio
-    char logicalModemUuid[MAX_UUID_LENGTH]; // A UUID typically "com.xxxx.lmX where X is the logical modem.
-    int status;             // Return status and an input parameter for RC_PHASE_FINISH
-} RIL_RadioCapability;
-
-// Do we want to split Data from Voice and the use
-// RIL_RadioTechnology for get/setPreferredVoice/Data ?
-typedef enum {
-    PREF_NET_TYPE_GSM_WCDMA                = 0, /* GSM/WCDMA (WCDMA preferred) */
-    PREF_NET_TYPE_GSM_ONLY                 = 1, /* GSM only */
-    PREF_NET_TYPE_WCDMA                    = 2, /* WCDMA  */
-    PREF_NET_TYPE_GSM_WCDMA_AUTO           = 3, /* GSM/WCDMA (auto mode, according to PRL) */
-    PREF_NET_TYPE_CDMA_EVDO_AUTO           = 4, /* CDMA and EvDo (auto mode, according to PRL) */
-    PREF_NET_TYPE_CDMA_ONLY                = 5, /* CDMA only */
-    PREF_NET_TYPE_EVDO_ONLY                = 6, /* EvDo only */
-    PREF_NET_TYPE_GSM_WCDMA_CDMA_EVDO_AUTO = 7, /* GSM/WCDMA, CDMA, and EvDo (auto mode, according to PRL) */
-    PREF_NET_TYPE_LTE_CDMA_EVDO            = 8, /* LTE, CDMA and EvDo */
-    PREF_NET_TYPE_LTE_GSM_WCDMA            = 9, /* LTE, GSM/WCDMA */
-    PREF_NET_TYPE_LTE_CMDA_EVDO_GSM_WCDMA  = 10, /* LTE, CDMA, EvDo, GSM/WCDMA */
-    PREF_NET_TYPE_LTE_ONLY                 = 11, /* LTE only */
-    PREF_NET_TYPE_LTE_WCDMA                = 12  /* LTE/WCDMA */
-} RIL_PreferredNetworkType;
-
-/* Source for cdma subscription */
-typedef enum {
-   CDMA_SUBSCRIPTION_SOURCE_RUIM_SIM = 0,
-   CDMA_SUBSCRIPTION_SOURCE_NV = 1
-} RIL_CdmaSubscriptionSource;
-
-/* User-to-User signaling Info activation types derived from 3GPP 23.087 v8.0 */
-typedef enum {
-    RIL_UUS_TYPE1_IMPLICIT = 0,
-    RIL_UUS_TYPE1_REQUIRED = 1,
-    RIL_UUS_TYPE1_NOT_REQUIRED = 2,
-    RIL_UUS_TYPE2_REQUIRED = 3,
-    RIL_UUS_TYPE2_NOT_REQUIRED = 4,
-    RIL_UUS_TYPE3_REQUIRED = 5,
-    RIL_UUS_TYPE3_NOT_REQUIRED = 6
-} RIL_UUS_Type;
-
-/* User-to-User Signaling Information data coding schemes. Possible values for
- * Octet 3 (Protocol Discriminator field) in the UUIE. The values have been
- * specified in section 10.5.4.25 of 3GPP TS 24.008 */
-typedef enum {
-    RIL_UUS_DCS_USP = 0,          /* User specified protocol */
-    RIL_UUS_DCS_OSIHLP = 1,       /* OSI higher layer protocol */
-    RIL_UUS_DCS_X244 = 2,         /* X.244 */
-    RIL_UUS_DCS_RMCF = 3,         /* Reserved for system mangement
-                                     convergence function */
-    RIL_UUS_DCS_IA5c = 4          /* IA5 characters */
-} RIL_UUS_DCS;
-
-/* User-to-User Signaling Information defined in 3GPP 23.087 v8.0
- * This data is passed in RIL_ExtensionRecord and rec contains this
- * structure when type is RIL_UUS_INFO_EXT_REC */
-typedef struct {
-  RIL_UUS_Type    uusType;    /* UUS Type */
-  RIL_UUS_DCS     uusDcs;     /* UUS Data Coding Scheme */
-  int             uusLength;  /* Length of UUS Data */
-  char *          uusData;    /* UUS Data */
-} RIL_UUS_Info;
-
-/* CDMA Signal Information Record as defined in C.S0005 section 3.7.5.5 */
-typedef struct {
-  char isPresent;    /* non-zero if signal information record is present */
-  char signalType;   /* as defined 3.7.5.5-1 */
-  char alertPitch;   /* as defined 3.7.5.5-2 */
-  char signal;       /* as defined 3.7.5.5-3, 3.7.5.5-4 or 3.7.5.5-5 */
-} RIL_CDMA_SignalInfoRecord;
-
-typedef struct {
-    RIL_CallState   state;
-    int             index;      /* Connection Index for use with, eg, AT+CHLD */
-    int             toa;        /* type of address, eg 145 = intl */
-    char            isMpty;     /* nonzero if is mpty call */
-    char            isMT;       /* nonzero if call is mobile terminated */
-    char            als;        /* ALS line indicator if available
-                                   (0 = line 1) */
-    char            isVoice;    /* nonzero if this is is a voice call */
-    char            isVoicePrivacy;     /* nonzero if CDMA voice privacy mode is active */
-    char *          number;     /* Remote party number */
-    int             numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */
-    char *          name;       /* Remote party name */
-    int             namePresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */
-    RIL_UUS_Info *  uusInfo;    /* NULL or Pointer to User-User Signaling Information */
-} RIL_Call;
-
-/* Deprecated, use RIL_Data_Call_Response_v6 */
-typedef struct {
-    int             cid;        /* Context ID, uniquely identifies this call */
-    int             active;     /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
-    char *          type;       /* One of the PDP_type values in TS 27.007 section 10.1.1.
-                                   For example, "IP", "IPV6", "IPV4V6", or "PPP". */
-    char *          apn;        /* ignored */
-    char *          address;    /* An address, e.g., "192.0.1.3" or "2001:db8::1". */
-} RIL_Data_Call_Response_v4;
-
-/*
- * Returned by RIL_REQUEST_SETUP_DATA_CALL, RIL_REQUEST_DATA_CALL_LIST
- * and RIL_UNSOL_DATA_CALL_LIST_CHANGED, on error status != 0.
- */
-typedef struct {
-    int             status;     /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
-    int             suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
-                                           back-off timer value RIL wants to override the one
-                                           pre-configured in FW.
-                                           The unit is miliseconds.
-                                           The value < 0 means no value is suggested.
-                                           The value 0 means retry should be done ASAP.
-                                           The value of INT_MAX(0x7fffffff) means no retry. */
-    int             cid;        /* Context ID, uniquely identifies this call */
-    int             active;     /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
-    char *          type;       /* One of the PDP_type values in TS 27.007 section 10.1.1.
-                                   For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
-                                   PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
-                                   such as "IP" or "IPV6" */
-    char *          ifname;     /* The network interface name */
-    char *          addresses;  /* A space-delimited list of addresses with optional "/" prefix length,
-                                   e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
-                                   May not be empty, typically 1 IPv4 or 1 IPv6 or
-                                   one of each. If the prefix length is absent the addresses
-                                   are assumed to be point to point with IPv4 having a prefix
-                                   length of 32 and IPv6 128. */
-    char *          dnses;      /* A space-delimited list of DNS server addresses,
-                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
-                                   May be empty. */
-    char *          gateways;   /* A space-delimited list of default gateway addresses,
-                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
-                                   May be empty in which case the addresses represent point
-                                   to point connections. */
-} RIL_Data_Call_Response_v6;
-
-typedef struct {
-    int             status;     /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
-    int             suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
-                                           back-off timer value RIL wants to override the one
-                                           pre-configured in FW.
-                                           The unit is miliseconds.
-                                           The value < 0 means no value is suggested.
-                                           The value 0 means retry should be done ASAP.
-                                           The value of INT_MAX(0x7fffffff) means no retry. */
-    int             cid;        /* Context ID, uniquely identifies this call */
-    int             active;     /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
-    char *          type;       /* One of the PDP_type values in TS 27.007 section 10.1.1.
-                                   For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
-                                   PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
-                                   such as "IP" or "IPV6" */
-    char *          ifname;     /* The network interface name */
-    char *          addresses;  /* A space-delimited list of addresses with optional "/" prefix length,
-                                   e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
-                                   May not be empty, typically 1 IPv4 or 1 IPv6 or
-                                   one of each. If the prefix length is absent the addresses
-                                   are assumed to be point to point with IPv4 having a prefix
-                                   length of 32 and IPv6 128. */
-    char *          dnses;      /* A space-delimited list of DNS server addresses,
-                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
-                                   May be empty. */
-    char *          gateways;   /* A space-delimited list of default gateway addresses,
-                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
-                                   May be empty in which case the addresses represent point
-                                   to point connections. */
-    char *          pcscf;    /* the Proxy Call State Control Function address
-                                 via PCO(Protocol Configuration Option) for IMS client. */
-} RIL_Data_Call_Response_v9;
-
-typedef struct {
-    int             status;     /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
-    int             suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
-                                           back-off timer value RIL wants to override the one
-                                           pre-configured in FW.
-                                           The unit is miliseconds.
-                                           The value < 0 means no value is suggested.
-                                           The value 0 means retry should be done ASAP.
-                                           The value of INT_MAX(0x7fffffff) means no retry. */
-    int             cid;        /* Context ID, uniquely identifies this call */
-    int             active;     /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
-    char *          type;       /* One of the PDP_type values in TS 27.007 section 10.1.1.
-                                   For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
-                                   PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
-                                   such as "IP" or "IPV6" */
-    char *          ifname;     /* The network interface name */
-    char *          addresses;  /* A space-delimited list of addresses with optional "/" prefix length,
-                                   e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
-                                   May not be empty, typically 1 IPv4 or 1 IPv6 or
-                                   one of each. If the prefix length is absent the addresses
-                                   are assumed to be point to point with IPv4 having a prefix
-                                   length of 32 and IPv6 128. */
-    char *          dnses;      /* A space-delimited list of DNS server addresses,
-                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
-                                   May be empty. */
-    char *          gateways;   /* A space-delimited list of default gateway addresses,
-                                   e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
-                                   May be empty in which case the addresses represent point
-                                   to point connections. */
-    char *          pcscf;    /* the Proxy Call State Control Function address
-                                 via PCO(Protocol Configuration Option) for IMS client. */
-    int             mtu;        /* MTU received from network
-                                   Value <= 0 means network has either not sent a value or
-                                   sent an invalid value */
-} RIL_Data_Call_Response_v11;
-
-typedef enum {
-    RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */
-    RADIO_TECH_3GPP2 = 2 /* 3GPP2 Technologies - CDMA */
-} RIL_RadioTechnologyFamily;
-
-typedef struct {
-    RIL_RadioTechnologyFamily tech;
-    unsigned char             retry;       /* 0 == not retry, nonzero == retry */
-    int                       messageRef;  /* Valid field if retry is set to nonzero.
-                                              Contains messageRef from RIL_SMS_Response
-                                              corresponding to failed MO SMS.
-                                            */
-
-    union {
-        /* Valid field if tech is RADIO_TECH_3GPP2. See RIL_REQUEST_CDMA_SEND_SMS */
-        RIL_CDMA_SMS_Message* cdmaMessage;
-
-        /* Valid field if tech is RADIO_TECH_3GPP. See RIL_REQUEST_SEND_SMS */
-        char**                gsmMessage;
-    } message;
-} RIL_IMS_SMS_Message;
-
-typedef struct {
-    int messageRef;   /* TP-Message-Reference for GSM,
-                         and BearerData MessageId for CDMA
-                         (See 3GPP2 C.S0015-B, v2.0, table 4.5-1). */
-    char *ackPDU;     /* or NULL if n/a */
-    int errorCode;    /* See 3GPP 27.005, 3.2.5 for GSM/UMTS,
-                         3GPP2 N.S0005 (IS-41C) Table 171 for CDMA,
-                         -1 if unknown or not applicable*/
-} RIL_SMS_Response;
-
-/** Used by RIL_REQUEST_WRITE_SMS_TO_SIM */
-typedef struct {
-    int status;     /* Status of message.  See TS 27.005 3.1, "<stat>": */
-                    /*      0 = "REC UNREAD"    */
-                    /*      1 = "REC READ"      */
-                    /*      2 = "STO UNSENT"    */
-                    /*      3 = "STO SENT"      */
-    char * pdu;     /* PDU of message to write, as an ASCII hex string less the SMSC address,
-                       the TP-layer length is "strlen(pdu)/2". */
-    char * smsc;    /* SMSC address in GSM BCD format prefixed by a length byte
-                       (as expected by TS 27.005) or NULL for default SMSC */
-} RIL_SMS_WriteArgs;
-
-/** Used by RIL_REQUEST_DIAL */
-typedef struct {
-    char * address;
-    int clir;
-            /* (same as 'n' paremeter in TS 27.007 7.7 "+CLIR"
-             * clir == 0 on "use subscription default value"
-             * clir == 1 on "CLIR invocation" (restrict CLI presentation)
-             * clir == 2 on "CLIR suppression" (allow CLI presentation)
-             */
-    RIL_UUS_Info *  uusInfo;    /* NULL or Pointer to User-User Signaling Information */
-} RIL_Dial;
-
-typedef struct {
-    int command;    /* one of the commands listed for TS 27.007 +CRSM*/
-    int fileid;     /* EF id */
-    char *path;     /* "pathid" from TS 27.007 +CRSM command.
-                       Path is in hex asciii format eg "7f205f70"
-                       Path must always be provided.
-                     */
-    int p1;
-    int p2;
-    int p3;
-    char *data;     /* May be NULL*/
-    char *pin2;     /* May be NULL*/
-} RIL_SIM_IO_v5;
-
-typedef struct {
-    int command;    /* one of the commands listed for TS 27.007 +CRSM*/
-    int fileid;     /* EF id */
-    char *path;     /* "pathid" from TS 27.007 +CRSM command.
-                       Path is in hex asciii format eg "7f205f70"
-                       Path must always be provided.
-                     */
-    int p1;
-    int p2;
-    int p3;
-    char *data;     /* May be NULL*/
-    char *pin2;     /* May be NULL*/
-    char *aidPtr;   /* AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. */
-} RIL_SIM_IO_v6;
-
-/* Used by RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL and
- * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC. */
-typedef struct {
-    int sessionid;  /* "sessionid" from TS 27.007 +CGLA command. Should be
-                       ignored for +CSIM command. */
-
-    /* Following fields are used to derive the APDU ("command" and "length"
-       values in TS 27.007 +CSIM and +CGLA commands). */
-    int cla;
-    int instruction;
-    int p1;
-    int p2;
-    int p3;         /* A negative P3 implies a 4 byte APDU. */
-    char *data;     /* May be NULL. In hex string format. */
-} RIL_SIM_APDU;
-
-typedef struct {
-    int sw1;
-    int sw2;
-    char *simResponse;  /* In hex string format ([a-fA-F0-9]*), except for SIM_AUTHENTICATION
-                           response for which it is in Base64 format, see 3GPP TS 31.102 7.1.2 */
-} RIL_SIM_IO_Response;
-
-/* See also com.android.internal.telephony.gsm.CallForwardInfo */
-
-typedef struct {
-    int             status;     /*
-                                 * For RIL_REQUEST_QUERY_CALL_FORWARD_STATUS
-                                 * status 1 = active, 0 = not active
-                                 *
-                                 * For RIL_REQUEST_SET_CALL_FORWARD:
-                                 * status is:
-                                 * 0 = disable
-                                 * 1 = enable
-                                 * 2 = interrogate
-                                 * 3 = registeration
-                                 * 4 = erasure
-                                 */
-
-    int             reason;      /* from TS 27.007 7.11 "reason" */
-    int             serviceClass;/* From 27.007 +CCFC/+CLCK "class"
-                                    See table for Android mapping from
-                                    MMI service code
-                                    0 means user doesn't input class */
-    int             toa;         /* "type" from TS 27.007 7.11 */
-    char *          number;      /* "number" from TS 27.007 7.11. May be NULL */
-    int             timeSeconds; /* for CF no reply only */
-}RIL_CallForwardInfo;
-
-typedef struct {
-   char * cid;         /* Combination of LAC and Cell Id in 32 bits in GSM.
-                        * Upper 16 bits is LAC and lower 16 bits
-                        * is CID (as described in TS 27.005)
-                        * Primary Scrambling Code (as described in TS 25.331)
-                        *         in 9 bits in UMTS
-                        * Valid values are hexadecimal 0x0000 - 0xffffffff.
-                        */
-   int    rssi;        /* Received RSSI in GSM,
-                        * Level index of CPICH Received Signal Code Power in UMTS
-                        */
-} RIL_NeighboringCell;
-
-typedef struct {
-  char lce_status;                 /* LCE service status:
-                                    * -1 = not supported;
-                                    * 0 = stopped;
-                                    * 1 = active.
-                                    */
-  unsigned int actual_interval_ms; /* actual LCE reporting interval,
-                                    * meaningful only if LCEStatus = 1.
-                                    */
-} RIL_LceStatusInfo;
-
-typedef struct {
-  unsigned int last_hop_capacity_kbps; /* last-hop cellular capacity: kilobits/second. */
-  unsigned char confidence_level;      /* capacity estimate confidence: 0-100 */
-  unsigned char lce_suspended;         /* LCE report going to be suspended? (e.g., radio
-                                        * moves to inactive state or network type change)
-                                        * 1 = suspended;
-                                        * 0 = not suspended.
-                                        */
-} RIL_LceDataInfo;
-
-/* See RIL_REQUEST_LAST_CALL_FAIL_CAUSE */
-typedef enum {
-    CALL_FAIL_UNOBTAINABLE_NUMBER = 1,
-    CALL_FAIL_NORMAL = 16,
-    CALL_FAIL_BUSY = 17,
-    CALL_FAIL_CONGESTION = 34,
-    CALL_FAIL_ACM_LIMIT_EXCEEDED = 68,
-    CALL_FAIL_CALL_BARRED = 240,
-    CALL_FAIL_FDN_BLOCKED = 241,
-    CALL_FAIL_IMSI_UNKNOWN_IN_VLR = 242,
-    CALL_FAIL_IMEI_NOT_ACCEPTED = 243,
-    CALL_FAIL_DIAL_MODIFIED_TO_USSD = 244, /* STK Call Control */
-    CALL_FAIL_DIAL_MODIFIED_TO_SS = 245,
-    CALL_FAIL_DIAL_MODIFIED_TO_DIAL = 246,
-    CALL_FAIL_CDMA_LOCKED_UNTIL_POWER_CYCLE = 1000,
-    CALL_FAIL_CDMA_DROP = 1001,
-    CALL_FAIL_CDMA_INTERCEPT = 1002,
-    CALL_FAIL_CDMA_REORDER = 1003,
-    CALL_FAIL_CDMA_SO_REJECT = 1004,
-    CALL_FAIL_CDMA_RETRY_ORDER = 1005,
-    CALL_FAIL_CDMA_ACCESS_FAILURE = 1006,
-    CALL_FAIL_CDMA_PREEMPTED = 1007,
-    CALL_FAIL_CDMA_NOT_EMERGENCY = 1008, /* For non-emergency number dialed
-                                            during emergency callback mode */
-    CALL_FAIL_CDMA_ACCESS_BLOCKED = 1009, /* CDMA network access probes blocked */
-    CALL_FAIL_ERROR_UNSPECIFIED = 0xffff
-} RIL_LastCallFailCause;
-
-typedef struct {
-  RIL_LastCallFailCause cause_code;
-  char *                vendor_cause;
-} RIL_LastCallFailCauseInfo;
-
-/* See RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE */
-typedef enum {
-    PDP_FAIL_NONE = 0, /* No error, connection ok */
-
-    /* an integer cause code defined in TS 24.008
-       section 6.1.3.1.3 or TS 24.301 Release 8+ Annex B.
-       If the implementation does not have access to the exact cause codes,
-       then it should return one of the following values,
-       as the UI layer needs to distinguish these
-       cases for error notification and potential retries. */
-    PDP_FAIL_OPERATOR_BARRED = 0x08,               /* no retry */
-    PDP_FAIL_INSUFFICIENT_RESOURCES = 0x1A,
-    PDP_FAIL_MISSING_UKNOWN_APN = 0x1B,            /* no retry */
-    PDP_FAIL_UNKNOWN_PDP_ADDRESS_TYPE = 0x1C,      /* no retry */
-    PDP_FAIL_USER_AUTHENTICATION = 0x1D,           /* no retry */
-    PDP_FAIL_ACTIVATION_REJECT_GGSN = 0x1E,        /* no retry */
-    PDP_FAIL_ACTIVATION_REJECT_UNSPECIFIED = 0x1F,
-    PDP_FAIL_SERVICE_OPTION_NOT_SUPPORTED = 0x20,  /* no retry */
-    PDP_FAIL_SERVICE_OPTION_NOT_SUBSCRIBED = 0x21, /* no retry */
-    PDP_FAIL_SERVICE_OPTION_OUT_OF_ORDER = 0x22,
-    PDP_FAIL_NSAPI_IN_USE = 0x23,                  /* no retry */
-    PDP_FAIL_REGULAR_DEACTIVATION = 0x24,          /* possibly restart radio,
-                                                      based on framework config */
-    PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32,             /* no retry */
-    PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33,             /* no retry */
-    PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34,
-    PDP_FAIL_PROTOCOL_ERRORS   = 0x6F,             /* no retry */
-
-    /* Not mentioned in the specification */
-    PDP_FAIL_VOICE_REGISTRATION_FAIL = -1,
-    PDP_FAIL_DATA_REGISTRATION_FAIL = -2,
-
-   /* reasons for data call drop - network/modem disconnect */
-    PDP_FAIL_SIGNAL_LOST = -3,
-    PDP_FAIL_PREF_RADIO_TECH_CHANGED = -4,/* preferred technology has changed, should retry
-                                             with parameters appropriate for new technology */
-    PDP_FAIL_RADIO_POWER_OFF = -5,        /* data call was disconnected because radio was resetting,
-                                             powered off - no retry */
-    PDP_FAIL_TETHERED_CALL_ACTIVE = -6,   /* data call was disconnected by modem because tethered
-                                             mode was up on same APN/data profile - no retry until
-                                             tethered call is off */
-
-    PDP_FAIL_ERROR_UNSPECIFIED = 0xffff,  /* retry silently */
-} RIL_DataCallFailCause;
-
-/* See RIL_REQUEST_SETUP_DATA_CALL */
-typedef enum {
-    RIL_DATA_PROFILE_DEFAULT    = 0,
-    RIL_DATA_PROFILE_TETHERED   = 1,
-    RIL_DATA_PROFILE_IMS        = 2,
-    RIL_DATA_PROFILE_FOTA       = 3,
-    RIL_DATA_PROFILE_CBS        = 4,
-    RIL_DATA_PROFILE_OEM_BASE   = 1000,    /* Start of OEM-specific profiles */
-    RIL_DATA_PROFILE_INVALID    = 0xFFFFFFFF
-} RIL_DataProfile;
-
-/* Used by RIL_UNSOL_SUPP_SVC_NOTIFICATION */
-typedef struct {
-    int     notificationType;   /*
-                                 * 0 = MO intermediate result code
-                                 * 1 = MT unsolicited result code
-                                 */
-    int     code;               /* See 27.007 7.17
-                                   "code1" for MO
-                                   "code2" for MT. */
-    int     index;              /* CUG index. See 27.007 7.17. */
-    int     type;               /* "type" from 27.007 7.17 (MT only). */
-    char *  number;             /* "number" from 27.007 7.17
-                                   (MT only, may be NULL). */
-} RIL_SuppSvcNotification;
-
-#define RIL_CARD_MAX_APPS     8
-
-typedef enum {
-    RIL_CARDSTATE_ABSENT   = 0,
-    RIL_CARDSTATE_PRESENT  = 1,
-    RIL_CARDSTATE_ERROR    = 2
-} RIL_CardState;
-
-typedef enum {
-    RIL_PERSOSUBSTATE_UNKNOWN                   = 0, /* initial state */
-    RIL_PERSOSUBSTATE_IN_PROGRESS               = 1, /* in between each lock transition */
-    RIL_PERSOSUBSTATE_READY                     = 2, /* when either SIM or RUIM Perso is finished
-                                                        since each app can only have 1 active perso
-                                                        involved */
-    RIL_PERSOSUBSTATE_SIM_NETWORK               = 3,
-    RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET        = 4,
-    RIL_PERSOSUBSTATE_SIM_CORPORATE             = 5,
-    RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER      = 6,
-    RIL_PERSOSUBSTATE_SIM_SIM                   = 7,
-    RIL_PERSOSUBSTATE_SIM_NETWORK_PUK           = 8, /* The corresponding perso lock is blocked */
-    RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET_PUK    = 9,
-    RIL_PERSOSUBSTATE_SIM_CORPORATE_PUK         = 10,
-    RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER_PUK  = 11,
-    RIL_PERSOSUBSTATE_SIM_SIM_PUK               = 12,
-    RIL_PERSOSUBSTATE_RUIM_NETWORK1             = 13,
-    RIL_PERSOSUBSTATE_RUIM_NETWORK2             = 14,
-    RIL_PERSOSUBSTATE_RUIM_HRPD                 = 15,
-    RIL_PERSOSUBSTATE_RUIM_CORPORATE            = 16,
-    RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER     = 17,
-    RIL_PERSOSUBSTATE_RUIM_RUIM                 = 18,
-    RIL_PERSOSUBSTATE_RUIM_NETWORK1_PUK         = 19, /* The corresponding perso lock is blocked */
-    RIL_PERSOSUBSTATE_RUIM_NETWORK2_PUK         = 20,
-    RIL_PERSOSUBSTATE_RUIM_HRPD_PUK             = 21,
-    RIL_PERSOSUBSTATE_RUIM_CORPORATE_PUK        = 22,
-    RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER_PUK = 23,
-    RIL_PERSOSUBSTATE_RUIM_RUIM_PUK             = 24
-} RIL_PersoSubstate;
-
-typedef enum {
-    RIL_APPSTATE_UNKNOWN               = 0,
-    RIL_APPSTATE_DETECTED              = 1,
-    RIL_APPSTATE_PIN                   = 2, /* If PIN1 or UPin is required */
-    RIL_APPSTATE_PUK                   = 3, /* If PUK1 or Puk for UPin is required */
-    RIL_APPSTATE_SUBSCRIPTION_PERSO    = 4, /* perso_substate should be look at
-                                               when app_state is assigned to this value */
-    RIL_APPSTATE_READY                 = 5
-} RIL_AppState;
-
-typedef enum {
-    RIL_PINSTATE_UNKNOWN              = 0,
-    RIL_PINSTATE_ENABLED_NOT_VERIFIED = 1,
-    RIL_PINSTATE_ENABLED_VERIFIED     = 2,
-    RIL_PINSTATE_DISABLED             = 3,
-    RIL_PINSTATE_ENABLED_BLOCKED      = 4,
-    RIL_PINSTATE_ENABLED_PERM_BLOCKED = 5
-} RIL_PinState;
-
-typedef enum {
-  RIL_APPTYPE_UNKNOWN = 0,
-  RIL_APPTYPE_SIM     = 1,
-  RIL_APPTYPE_USIM    = 2,
-  RIL_APPTYPE_RUIM    = 3,
-  RIL_APPTYPE_CSIM    = 4,
-  RIL_APPTYPE_ISIM    = 5
-} RIL_AppType;
-
-typedef struct
-{
-  RIL_AppType      app_type;
-  RIL_AppState     app_state;
-  RIL_PersoSubstate perso_substate; /* applicable only if app_state ==
-                                       RIL_APPSTATE_SUBSCRIPTION_PERSO */
-  char             *aid_ptr;        /* null terminated string, e.g., from 0xA0, 0x00 -> 0x41,
-                                       0x30, 0x30, 0x30 */
-  char             *app_label_ptr;  /* null terminated string */
-  int              pin1_replaced;   /* applicable to USIM, CSIM & ISIM */
-  RIL_PinState     pin1;
-  RIL_PinState     pin2;
-  int              foo1;            /* Samsung */
-  int              foo2;            /* Samsung */
-  int              foo3;            /* Samsung */
-  int              foo4;            /* Samsung */
-  int              foo5;            /* Samsung */
-} RIL_AppStatus;
-
-/* Deprecated, use RIL_CardStatus_v6 */
-typedef struct
-{
-  RIL_CardState card_state;
-  RIL_PinState  universal_pin_state;             /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */
-  int           gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
-  int           cdma_subscription_app_index;     /* value < RIL_CARD_MAX_APPS, -1 if none */
-  int           num_applications;                /* value <= RIL_CARD_MAX_APPS */
-  RIL_AppStatus applications[RIL_CARD_MAX_APPS];
-} RIL_CardStatus_v5;
-
-typedef struct
-{
-  RIL_CardState card_state;
-  RIL_PinState  universal_pin_state;             /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */
-  int           gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
-  int           cdma_subscription_app_index;     /* value < RIL_CARD_MAX_APPS, -1 if none */
-  int           ims_subscription_app_index;      /* value < RIL_CARD_MAX_APPS, -1 if none */
-  int           num_applications;                /* value <= RIL_CARD_MAX_APPS */
-  RIL_AppStatus applications[RIL_CARD_MAX_APPS];
-} RIL_CardStatus_v6;
-
-/** The result of a SIM refresh, returned in data[0] of RIL_UNSOL_SIM_REFRESH
- *      or as part of RIL_SimRefreshResponse_v7
- */
-typedef enum {
-    /* A file on SIM has been updated.  data[1] contains the EFID. */
-    SIM_FILE_UPDATE = 0,
-    /* SIM initialized.  All files should be re-read. */
-    SIM_INIT = 1,
-    /* SIM reset.  SIM power required, SIM may be locked and all files should be re-read. */
-    SIM_RESET = 2
-} RIL_SimRefreshResult;
-
-typedef struct {
-    RIL_SimRefreshResult result;
-    int                  ef_id; /* is the EFID of the updated file if the result is */
-                                /* SIM_FILE_UPDATE or 0 for any other result. */
-    char *               aid;   /* is AID(application ID) of the card application */
-                                /* See ETSI 102.221 8.1 and 101.220 4 */
-                                /*     For SIM_FILE_UPDATE result it can be set to AID of */
-                                /*         application in which updated EF resides or it can be */
-                                /*         NULL if EF is outside of an application. */
-                                /*     For SIM_INIT result this field is set to AID of */
-                                /*         application that caused REFRESH */
-                                /*     For SIM_RESET result it is NULL. */
-} RIL_SimRefreshResponse_v7;
-
-/* Deprecated, use RIL_CDMA_CallWaiting_v6 */
-typedef struct {
-    char *          number;             /* Remote party number */
-    int             numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */
-    char *          name;               /* Remote party name */
-    RIL_CDMA_SignalInfoRecord signalInfoRecord;
-} RIL_CDMA_CallWaiting_v5;
-
-typedef struct {
-    char *          number;             /* Remote party number */
-    int             numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */
-    char *          name;               /* Remote party name */
-    RIL_CDMA_SignalInfoRecord signalInfoRecord;
-    /* Number type/Number plan required to support International Call Waiting */
-    int             number_type;        /* 0=Unknown, 1=International, 2=National,
-                                           3=Network specific, 4=subscriber */
-    int             number_plan;        /* 0=Unknown, 1=ISDN, 3=Data, 4=Telex, 8=Nat'l, 9=Private */
-} RIL_CDMA_CallWaiting_v6;
-
-/**
- * Which types of Cell Broadcast Message (CBM) are to be received by the ME
- *
- * uFromServiceID - uToServiceID defines a range of CBM message identifiers
- * whose value is 0x0000 - 0xFFFF as defined in TS 23.041 9.4.1.2.2 for GMS
- * and 9.4.4.2.2 for UMTS. All other values can be treated as empty
- * CBM message ID.
- *
- * uFromCodeScheme - uToCodeScheme defines a range of CBM data coding schemes
- * whose value is 0x00 - 0xFF as defined in TS 23.041 9.4.1.2.3 for GMS
- * and 9.4.4.2.3 for UMTS.
- * All other values can be treated as empty CBM data coding scheme.
- *
- * selected 0 means message types specified in <fromServiceId, toServiceId>
- * and <fromCodeScheme, toCodeScheme>are not accepted, while 1 means accepted.
- *
- * Used by RIL_REQUEST_GSM_GET_BROADCAST_CONFIG and
- * RIL_REQUEST_GSM_SET_BROADCAST_CONFIG.
- */
-typedef struct {
-    int fromServiceId;
-    int toServiceId;
-    int fromCodeScheme;
-    int toCodeScheme;
-    unsigned char selected;
-} RIL_GSM_BroadcastSmsConfigInfo;
-
-/* No restriction at all including voice/SMS/USSD/SS/AV64 and packet data. */
-#define RIL_RESTRICTED_STATE_NONE           0x00
-/* Block emergency call due to restriction. But allow all normal voice/SMS/USSD/SS/AV64. */
-#define RIL_RESTRICTED_STATE_CS_EMERGENCY   0x01
-/* Block all normal voice/SMS/USSD/SS/AV64 due to restriction. Only Emergency call allowed. */
-#define RIL_RESTRICTED_STATE_CS_NORMAL      0x02
-/* Block all voice/SMS/USSD/SS/AV64 including emergency call due to restriction.*/
-#define RIL_RESTRICTED_STATE_CS_ALL         0x04
-/* Block packet data access due to restriction. */
-#define RIL_RESTRICTED_STATE_PS_ALL         0x10
-
-/* The status for an OTASP/OTAPA session */
-typedef enum {
-    CDMA_OTA_PROVISION_STATUS_SPL_UNLOCKED,
-    CDMA_OTA_PROVISION_STATUS_SPC_RETRIES_EXCEEDED,
-    CDMA_OTA_PROVISION_STATUS_A_KEY_EXCHANGED,
-    CDMA_OTA_PROVISION_STATUS_SSD_UPDATED,
-    CDMA_OTA_PROVISION_STATUS_NAM_DOWNLOADED,
-    CDMA_OTA_PROVISION_STATUS_MDN_DOWNLOADED,
-    CDMA_OTA_PROVISION_STATUS_IMSI_DOWNLOADED,
-    CDMA_OTA_PROVISION_STATUS_PRL_DOWNLOADED,
-    CDMA_OTA_PROVISION_STATUS_COMMITTED,
-    CDMA_OTA_PROVISION_STATUS_OTAPA_STARTED,
-    CDMA_OTA_PROVISION_STATUS_OTAPA_STOPPED,
-    CDMA_OTA_PROVISION_STATUS_OTAPA_ABORTED
-} RIL_CDMA_OTA_ProvisionStatus;
-
-typedef struct {
-    int signalStrength;  /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
-    int bitErrorRate;    /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */
-} RIL_GW_SignalStrength;
-
-typedef struct {
-    int signalStrength;  /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
-    int bitErrorRate;    /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */
-} RIL_SignalStrengthWcdma;
-
-typedef struct {
-    int dbm;  /* Valid values are positive integers.  This value is the actual RSSI value
-               * multiplied by -1.  Example: If the actual RSSI is -75, then this response
-               * value will be 75.
-               */
-    int ecio; /* Valid values are positive integers.  This value is the actual Ec/Io multiplied
-               * by -10.  Example: If the actual Ec/Io is -12.5 dB, then this response value
-               * will be 125.
-               */
-} RIL_CDMA_SignalStrength;
-
-
-typedef struct {
-    int dbm;  /* Valid values are positive integers.  This value is the actual RSSI value
-               * multiplied by -1.  Example: If the actual RSSI is -75, then this response
-               * value will be 75.
-               */
-    int ecio; /* Valid values are positive integers.  This value is the actual Ec/Io multiplied
-               * by -10.  Example: If the actual Ec/Io is -12.5 dB, then this response value
-               * will be 125.
-               */
-    int signalNoiseRatio; /* Valid values are 0-8.  8 is the highest signal to noise ratio. */
-} RIL_EVDO_SignalStrength;
-
-typedef struct {
-    int signalStrength;  /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
-    int rsrp;            /* The current Reference Signal Receive Power in dBm multipled by -1.
-                          * Range: 44 to 140 dBm
-                          * INT_MAX: 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP TS 36.133 9.1.4 */
-    int rsrq;            /* The current Reference Signal Receive Quality in dB multiplied by -1.
-                          * Range: 20 to 3 dB.
-                          * INT_MAX: 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP TS 36.133 9.1.7 */
-    int rssnr;           /* The current reference signal signal-to-noise ratio in 0.1 dB units.
-                          * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
-                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP TS 36.101 8.1.1 */
-    int cqi;             /* The current Channel Quality Indicator.
-                          * Range: 0 to 15.
-                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */
-} RIL_LTE_SignalStrength;
-
-typedef struct {
-    int signalStrength;  /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
-    int rsrp;            /* The current Reference Signal Receive Power in dBm multipled by -1.
-                          * Range: 44 to 140 dBm
-                          * INT_MAX: 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP TS 36.133 9.1.4 */
-    int rsrq;            /* The current Reference Signal Receive Quality in dB multiplied by -1.
-                          * Range: 20 to 3 dB.
-                          * INT_MAX: 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP TS 36.133 9.1.7 */
-    int rssnr;           /* The current reference signal signal-to-noise ratio in 0.1 dB units.
-                          * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
-                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP TS 36.101 8.1.1 */
-    int cqi;             /* The current Channel Quality Indicator.
-                          * Range: 0 to 15.
-                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */
-    int timingAdvance;   /* timing advance in micro seconds for a one way trip from cell to device.
-                          * Approximate distance can be calculated using 300m/us * timingAdvance.
-                          * Range: 0 to 0x7FFFFFFE
-                          * INT_MAX : 0x7FFFFFFF denotes invalid value.
-                          * Reference: 3GPP 36.321 section 6.1.3.5
-                          * also: http://www.cellular-planningoptimization.com/2010/02/timing-advance-with-calculation.html */
-} RIL_LTE_SignalStrength_v8;
-
-typedef struct {
-    int rscp;    /* The Received Signal Code Power in dBm multipled by -1.
-                  * Range : 25 to 120
-                  * INT_MAX: 0x7FFFFFFF denotes invalid value.
-                  * Reference: 3GPP TS 25.123, section 9.1.1.1 */
-} RIL_TD_SCDMA_SignalStrength;
-
-/* Deprecated, use RIL_SignalStrength_v6 */
-typedef struct {
-    RIL_GW_SignalStrength   GW_SignalStrength;
-    RIL_CDMA_SignalStrength CDMA_SignalStrength;
-    RIL_EVDO_SignalStrength EVDO_SignalStrength;
-} RIL_SignalStrength_v5;
-
-typedef struct {
-    RIL_GW_SignalStrength   GW_SignalStrength;
-    RIL_CDMA_SignalStrength CDMA_SignalStrength;
-    RIL_EVDO_SignalStrength EVDO_SignalStrength;
-    RIL_LTE_SignalStrength  LTE_SignalStrength;
-} RIL_SignalStrength_v6;
-
-typedef struct {
-    RIL_GW_SignalStrength       GW_SignalStrength;
-    RIL_CDMA_SignalStrength     CDMA_SignalStrength;
-    RIL_EVDO_SignalStrength     EVDO_SignalStrength;
-    RIL_LTE_SignalStrength_v8   LTE_SignalStrength;
-} RIL_SignalStrength_v8;
-
-typedef struct {
-    RIL_GW_SignalStrength       GW_SignalStrength;
-    RIL_CDMA_SignalStrength     CDMA_SignalStrength;
-    RIL_EVDO_SignalStrength     EVDO_SignalStrength;
-    RIL_LTE_SignalStrength_v8   LTE_SignalStrength;
-    RIL_TD_SCDMA_SignalStrength TD_SCDMA_SignalStrength;
-} RIL_SignalStrength_v10;
-
-/** RIL_CellIdentityGsm */
-typedef struct {
-    int mcc;    /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */
-    int mnc;    /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */
-    int lac;    /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown  */
-    int cid;    /* 16-bit GSM Cell Identity described in TS 27.007, 0..65535, INT_MAX if unknown  */
-} RIL_CellIdentityGsm;
-
-/** RIL_CellIdentityWcdma */
-typedef struct {
-    int mcc;    /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown  */
-    int mnc;    /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown  */
-    int lac;    /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown  */
-    int cid;    /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown  */
-    int psc;    /* 9-bit UMTS Primary Scrambling Code described in TS 25.331, 0..511, INT_MAX if unknown */
-} RIL_CellIdentityWcdma;
-
-/** RIL_CellIdentityCdma */
-typedef struct {
-    int networkId;      /* Network Id 0..65535, INT_MAX if unknown */
-    int systemId;       /* CDMA System Id 0..32767, INT_MAX if unknown  */
-    int basestationId;  /* Base Station Id 0..65535, INT_MAX if unknown  */
-    int longitude;      /* Longitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0.
-                         * It is represented in units of 0.25 seconds and ranges from -2592000
-                         * to 2592000, both values inclusive (corresponding to a range of -180
-                         * to +180 degrees). INT_MAX if unknown */
-
-    int latitude;       /* Latitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0.
-                         * It is represented in units of 0.25 seconds and ranges from -1296000
-                         * to 1296000, both values inclusive (corresponding to a range of -90
-                         * to +90 degrees). INT_MAX if unknown */
-} RIL_CellIdentityCdma;
-
-/** RIL_CellIdentityLte */
-typedef struct {
-    int mcc;    /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown  */
-    int mnc;    /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown  */
-    int ci;     /* 28-bit Cell Identity described in TS ???, INT_MAX if unknown */
-    int pci;    /* physical cell id 0..503, INT_MAX if unknown  */
-    int tac;    /* 16-bit tracking area code, INT_MAX if unknown  */
-} RIL_CellIdentityLte;
-
-/** RIL_CellIdentityTdscdma */
-typedef struct {
-    int mcc;    /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown  */
-    int mnc;    /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown  */
-    int lac;    /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown  */
-    int cid;    /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown  */
-    int cpid;    /* 8-bit Cell Parameters ID described in TS 25.331, 0..127, INT_MAX if unknown */
-} RIL_CellIdentityTdscdma;
-
-/** RIL_CellInfoGsm */
-typedef struct {
-  RIL_CellIdentityGsm   cellIdentityGsm;
-  RIL_GW_SignalStrength signalStrengthGsm;
-} RIL_CellInfoGsm;
-
-/** RIL_CellInfoWcdma */
-typedef struct {
-  RIL_CellIdentityWcdma cellIdentityWcdma;
-  RIL_SignalStrengthWcdma signalStrengthWcdma;
-} RIL_CellInfoWcdma;
-
-/** RIL_CellInfoCdma */
-typedef struct {
-  RIL_CellIdentityCdma      cellIdentityCdma;
-  RIL_CDMA_SignalStrength   signalStrengthCdma;
-  RIL_EVDO_SignalStrength   signalStrengthEvdo;
-} RIL_CellInfoCdma;
-
-/** RIL_CellInfoLte */
-typedef struct {
-  RIL_CellIdentityLte        cellIdentityLte;
-  RIL_LTE_SignalStrength_v8  signalStrengthLte;
-} RIL_CellInfoLte;
-
-/** RIL_CellInfoTdscdma */
-typedef struct {
-  RIL_CellIdentityTdscdma cellIdentityTdscdma;
-  RIL_TD_SCDMA_SignalStrength signalStrengthTdscdma;
-} RIL_CellInfoTdscdma;
-
-// Must be the same as CellInfo.TYPE_XXX
-typedef enum {
-  RIL_CELL_INFO_TYPE_GSM    = 1,
-  RIL_CELL_INFO_TYPE_CDMA   = 2,
-  RIL_CELL_INFO_TYPE_LTE    = 3,
-  RIL_CELL_INFO_TYPE_WCDMA  = 4,
-  RIL_CELL_INFO_TYPE_TD_SCDMA  = 5
-} RIL_CellInfoType;
-
-// Must be the same as CellInfo.TIMESTAMP_TYPE_XXX
-typedef enum {
-    RIL_TIMESTAMP_TYPE_UNKNOWN = 0,
-    RIL_TIMESTAMP_TYPE_ANTENNA = 1,
-    RIL_TIMESTAMP_TYPE_MODEM = 2,
-    RIL_TIMESTAMP_TYPE_OEM_RIL = 3,
-    RIL_TIMESTAMP_TYPE_JAVA_RIL = 4,
-} RIL_TimeStampType;
-
-typedef struct {
-  RIL_CellInfoType  cellInfoType;   /* cell type for selecting from union CellInfo */
-  int               registered;     /* !0 if this cell is registered 0 if not registered */
-  RIL_TimeStampType timeStampType;  /* type of time stamp represented by timeStamp */
-  uint64_t          timeStamp;      /* Time in nanos as returned by ril_nano_time */
-  union {
-    RIL_CellInfoGsm     gsm;
-    RIL_CellInfoCdma    cdma;
-    RIL_CellInfoLte     lte;
-    RIL_CellInfoWcdma   wcdma;
-    RIL_CellInfoTdscdma tdscdma;
-  } CellInfo;
-} RIL_CellInfo;
-
-/* Names of the CDMA info records (C.S0005 section 3.7.5) */
-typedef enum {
-  RIL_CDMA_DISPLAY_INFO_REC,
-  RIL_CDMA_CALLED_PARTY_NUMBER_INFO_REC,
-  RIL_CDMA_CALLING_PARTY_NUMBER_INFO_REC,
-  RIL_CDMA_CONNECTED_NUMBER_INFO_REC,
-  RIL_CDMA_SIGNAL_INFO_REC,
-  RIL_CDMA_REDIRECTING_NUMBER_INFO_REC,
-  RIL_CDMA_LINE_CONTROL_INFO_REC,
-  RIL_CDMA_EXTENDED_DISPLAY_INFO_REC,
-  RIL_CDMA_T53_CLIR_INFO_REC,
-  RIL_CDMA_T53_RELEASE_INFO_REC,
-  RIL_CDMA_T53_AUDIO_CONTROL_INFO_REC
-} RIL_CDMA_InfoRecName;
-
-/* Display Info Rec as defined in C.S0005 section 3.7.5.1
-   Extended Display Info Rec as defined in C.S0005 section 3.7.5.16
-   Note: the Extended Display info rec contains multiple records of the
-   form: display_tag, display_len, and display_len occurrences of the
-   chari field if the display_tag is not 10000000 or 10000001.
-   To save space, the records are stored consecutively in a byte buffer.
-   The display_tag, display_len and chari fields are all 1 byte.
-*/
-
-typedef struct {
-  char alpha_len;
-  char alpha_buf[CDMA_ALPHA_INFO_BUFFER_LENGTH];
-} RIL_CDMA_DisplayInfoRecord;
-
-/* Called Party Number Info Rec as defined in C.S0005 section 3.7.5.2
-   Calling Party Number Info Rec as defined in C.S0005 section 3.7.5.3
-   Connected Number Info Rec as defined in C.S0005 section 3.7.5.4
-*/
-
-typedef struct {
-  char len;
-  char buf[CDMA_NUMBER_INFO_BUFFER_LENGTH];
-  char number_type;
-  char number_plan;
-  char pi;
-  char si;
-} RIL_CDMA_NumberInfoRecord;
-
-/* Redirecting Number Information Record as defined in C.S0005 section 3.7.5.11 */
-typedef enum {
-  RIL_REDIRECTING_REASON_UNKNOWN = 0,
-  RIL_REDIRECTING_REASON_CALL_FORWARDING_BUSY = 1,
-  RIL_REDIRECTING_REASON_CALL_FORWARDING_NO_REPLY = 2,
-  RIL_REDIRECTING_REASON_CALLED_DTE_OUT_OF_ORDER = 9,
-  RIL_REDIRECTING_REASON_CALL_FORWARDING_BY_THE_CALLED_DTE = 10,
-  RIL_REDIRECTING_REASON_CALL_FORWARDING_UNCONDITIONAL = 15,
-  RIL_REDIRECTING_REASON_RESERVED
-} RIL_CDMA_RedirectingReason;
-
-typedef struct {
-  RIL_CDMA_NumberInfoRecord redirectingNumber;
-  /* redirectingReason is set to RIL_REDIRECTING_REASON_UNKNOWN if not included */
-  RIL_CDMA_RedirectingReason redirectingReason;
-} RIL_CDMA_RedirectingNumberInfoRecord;
-
-/* Line Control Information Record as defined in C.S0005 section 3.7.5.15 */
-typedef struct {
-  char lineCtrlPolarityIncluded;
-  char lineCtrlToggle;
-  char lineCtrlReverse;
-  char lineCtrlPowerDenial;
-} RIL_CDMA_LineControlInfoRecord;
-
-/* T53 CLIR Information Record */
-typedef struct {
-  char cause;
-} RIL_CDMA_T53_CLIRInfoRecord;
-
-/* T53 Audio Control Information Record */
-typedef struct {
-  char upLink;
-  char downLink;
-} RIL_CDMA_T53_AudioControlInfoRecord;
-
-typedef struct {
-
-  RIL_CDMA_InfoRecName name;
-
-  union {
-    /* Display and Extended Display Info Rec */
-    RIL_CDMA_DisplayInfoRecord           display;
-
-    /* Called Party Number, Calling Party Number, Connected Number Info Rec */
-    RIL_CDMA_NumberInfoRecord            number;
-
-    /* Signal Info Rec */
-    RIL_CDMA_SignalInfoRecord            signal;
-
-    /* Redirecting Number Info Rec */
-    RIL_CDMA_RedirectingNumberInfoRecord redir;
-
-    /* Line Control Info Rec */
-    RIL_CDMA_LineControlInfoRecord       lineCtrl;
-
-    /* T53 CLIR Info Rec */
-    RIL_CDMA_T53_CLIRInfoRecord          clir;
-
-    /* T53 Audio Control Info Rec */
-    RIL_CDMA_T53_AudioControlInfoRecord  audioCtrl;
-  } rec;
-} RIL_CDMA_InformationRecord;
-
-#define RIL_CDMA_MAX_NUMBER_OF_INFO_RECS 10
-
-typedef struct {
-  char numberOfInfoRecs;
-  RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS];
-} RIL_CDMA_InformationRecords;
-
-/* See RIL_REQUEST_NV_READ_ITEM */
-typedef struct {
-  RIL_NV_Item itemID;
-} RIL_NV_ReadItem;
-
-/* See RIL_REQUEST_NV_WRITE_ITEM */
-typedef struct {
-  RIL_NV_Item   itemID;
-  char *        value;
-} RIL_NV_WriteItem;
-
-typedef enum {
-    HANDOVER_STARTED = 0,
-    HANDOVER_COMPLETED = 1,
-    HANDOVER_FAILED = 2,
-    HANDOVER_CANCELED = 3
-} RIL_SrvccState;
-
-/* hardware configuration reported to RILJ. */
-typedef enum {
-   RIL_HARDWARE_CONFIG_MODEM = 0,
-   RIL_HARDWARE_CONFIG_SIM = 1,
-} RIL_HardwareConfig_Type;
-
-typedef enum {
-   RIL_HARDWARE_CONFIG_STATE_ENABLED = 0,
-   RIL_HARDWARE_CONFIG_STATE_STANDBY = 1,
-   RIL_HARDWARE_CONFIG_STATE_DISABLED = 2,
-} RIL_HardwareConfig_State;
-
-typedef struct {
-   int rilModel;
-   uint32_t rat; /* bitset - ref. RIL_RadioTechnology. */
-   int maxVoice;
-   int maxData;
-   int maxStandby;
-} RIL_HardwareConfig_Modem;
-
-typedef struct {
-   char modemUuid[MAX_UUID_LENGTH];
-} RIL_HardwareConfig_Sim;
-
-typedef struct {
-  RIL_HardwareConfig_Type type;
-  char uuid[MAX_UUID_LENGTH];
-  RIL_HardwareConfig_State state;
-  union {
-     RIL_HardwareConfig_Modem modem;
-     RIL_HardwareConfig_Sim sim;
-  } cfg;
-} RIL_HardwareConfig;
-
-typedef enum {
-  SS_CFU,
-  SS_CF_BUSY,
-  SS_CF_NO_REPLY,
-  SS_CF_NOT_REACHABLE,
-  SS_CF_ALL,
-  SS_CF_ALL_CONDITIONAL,
-  SS_CLIP,
-  SS_CLIR,
-  SS_COLP,
-  SS_COLR,
-  SS_WAIT,
-  SS_BAOC,
-  SS_BAOIC,
-  SS_BAOIC_EXC_HOME,
-  SS_BAIC,
-  SS_BAIC_ROAMING,
-  SS_ALL_BARRING,
-  SS_OUTGOING_BARRING,
-  SS_INCOMING_BARRING
-} RIL_SsServiceType;
-
-typedef enum {
-  SS_ACTIVATION,
-  SS_DEACTIVATION,
-  SS_INTERROGATION,
-  SS_REGISTRATION,
-  SS_ERASURE
-} RIL_SsRequestType;
-
-typedef enum {
-  SS_ALL_TELE_AND_BEARER_SERVICES,
-  SS_ALL_TELESEVICES,
-  SS_TELEPHONY,
-  SS_ALL_DATA_TELESERVICES,
-  SS_SMS_SERVICES,
-  SS_ALL_TELESERVICES_EXCEPT_SMS
-} RIL_SsTeleserviceType;
-
-#define SS_INFO_MAX 4
-#define NUM_SERVICE_CLASSES 7
-
-typedef struct {
-  int numValidIndexes; /* This gives the number of valid values in cfInfo.
-                       For example if voice is forwarded to one number and data
-                       is forwarded to a different one then numValidIndexes will be
-                       2 indicating total number of valid values in cfInfo.
-                       Similarly if all the services are forwarded to the same
-                       number then the value of numValidIndexes will be 1. */
-
-  RIL_CallForwardInfo cfInfo[NUM_SERVICE_CLASSES]; /* This is the response data
-                                                      for SS request to query call
-                                                      forward status. see
-                                                      RIL_REQUEST_QUERY_CALL_FORWARD_STATUS */
-} RIL_CfData;
-
-typedef struct {
-  RIL_SsServiceType serviceType;
-  RIL_SsRequestType requestType;
-  RIL_SsTeleserviceType teleserviceType;
-  int serviceClass;
-  RIL_Errno result;
-
-  union {
-    int ssInfo[SS_INFO_MAX]; /* This is the response data for most of the SS GET/SET
-                                RIL requests. E.g. RIL_REQUSET_GET_CLIR returns
-                                two ints, so first two values of ssInfo[] will be
-                                used for response if serviceType is SS_CLIR and
-                                requestType is SS_INTERROGATION */
-
-    RIL_CfData cfData;
-  };
-} RIL_StkCcUnsolSsResponse;
-
-/**
- * Data connection power state
- */
-typedef enum {
-    RIL_DC_POWER_STATE_LOW      = 1,        // Low power state
-    RIL_DC_POWER_STATE_MEDIUM   = 2,        // Medium power state
-    RIL_DC_POWER_STATE_HIGH     = 3,        // High power state
-    RIL_DC_POWER_STATE_UNKNOWN  = INT32_MAX // Unknown state
-} RIL_DcPowerStates;
-
-/**
- * Data connection real time info
- */
-typedef struct {
-    uint64_t                    time;       // Time in nanos as returned by ril_nano_time
-    RIL_DcPowerStates           powerState; // Current power state
-} RIL_DcRtInfo;
-
-/**
- * Data profile to modem
- */
-typedef struct {
-    /* id of the data profile */
-    int profileId;
-    /* the APN to connect to */
-    char* apn;
-    /** one of the PDP_type values in TS 27.007 section 10.1.1.
-     * For example, "IP", "IPV6", "IPV4V6", or "PPP".
-     */
-    char* protocol;
-    /** authentication protocol used for this PDP context
-     * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3)
-     */
-    int authType;
-    /* the username for APN, or NULL */
-    char* user;
-    /* the password for APN, or NULL */
-    char* password;
-    /* the profile type, TYPE_COMMON-0, TYPE_3GPP-1, TYPE_3GPP2-2 */
-    int type;
-    /* the period in seconds to limit the maximum connections */
-    int maxConnsTime;
-    /* the maximum connections during maxConnsTime */
-    int maxConns;
-    /** the required wait time in seconds after a successful UE initiated
-     * disconnect of a given PDN connection before the device can send
-     * a new PDN connection request for that given PDN
-     */
-    int waitTime;
-    /* true to enable the profile, 0 to disable, 1 to enable */
-    int enabled;
-} RIL_DataProfileInfo;
-
-/* Tx Power Levels */
-#define RIL_NUM_TX_POWER_LEVELS     5
-
-typedef struct {
-
-  /* period (in ms) when modem is power collapsed */
-  uint32_t sleep_mode_time_ms;
-
-  /* period (in ms) when modem is awake and in idle mode*/
-  uint32_t idle_mode_time_ms;
-
-  /* period (in ms) for which Tx is active */
-  uint32_t tx_mode_time_ms[RIL_NUM_TX_POWER_LEVELS];
-
-  /* period (in ms) for which Rx is active */
-  uint32_t rx_mode_time_ms;
-} RIL_ActivityStatsInfo;
-
-/**
- * RIL_REQUEST_GET_SIM_STATUS
- *
- * Requests status of the SIM interface and the SIM card
- *
- * "data" is NULL
- *
- * "response" is const RIL_CardStatus_v6 *
- *
- * Valid errors:
- *  Must never fail
- */
-#define RIL_REQUEST_GET_SIM_STATUS 1
-
-/**
- * RIL_REQUEST_ENTER_SIM_PIN
- *
- * Supplies SIM PIN. Only called if RIL_CardStatus has RIL_APPSTATE_PIN state
- *
- * "data" is const char **
- * ((const char **)data)[0] is PIN value
- * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * PASSWORD_INCORRECT
- */
-
-#define RIL_REQUEST_ENTER_SIM_PIN 2
-
-/**
- * RIL_REQUEST_ENTER_SIM_PUK
- *
- * Supplies SIM PUK and new PIN.
- *
- * "data" is const char **
- * ((const char **)data)[0] is PUK value
- * ((const char **)data)[1] is new PIN value
- * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  PASSWORD_INCORRECT
- *     (PUK is invalid)
- */
-
-#define RIL_REQUEST_ENTER_SIM_PUK 3
-
-/**
- * RIL_REQUEST_ENTER_SIM_PIN2
- *
- * Supplies SIM PIN2. Only called following operation where SIM_PIN2 was
- * returned as a a failure from a previous operation.
- *
- * "data" is const char **
- * ((const char **)data)[0] is PIN2 value
- * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  PASSWORD_INCORRECT
- */
-
-#define RIL_REQUEST_ENTER_SIM_PIN2 4
-
-/**
- * RIL_REQUEST_ENTER_SIM_PUK2
- *
- * Supplies SIM PUK2 and new PIN2.
- *
- * "data" is const char **
- * ((const char **)data)[0] is PUK2 value
- * ((const char **)data)[1] is new PIN2 value
- * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  PASSWORD_INCORRECT
- *     (PUK2 is invalid)
- */
-
-#define RIL_REQUEST_ENTER_SIM_PUK2 5
-
-/**
- * RIL_REQUEST_CHANGE_SIM_PIN
- *
- * Supplies old SIM PIN and new PIN.
- *
- * "data" is const char **
- * ((const char **)data)[0] is old PIN value
- * ((const char **)data)[1] is new PIN value
- * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  PASSWORD_INCORRECT
- *     (old PIN is invalid)
- *
- */
-
-#define RIL_REQUEST_CHANGE_SIM_PIN 6
-
-
-/**
- * RIL_REQUEST_CHANGE_SIM_PIN2
- *
- * Supplies old SIM PIN2 and new PIN2.
- *
- * "data" is const char **
- * ((const char **)data)[0] is old PIN2 value
- * ((const char **)data)[1] is new PIN2 value
- * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  PASSWORD_INCORRECT
- *     (old PIN2 is invalid)
- *
- */
-
-#define RIL_REQUEST_CHANGE_SIM_PIN2 7
-
-/**
- * RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION
- *
- * Requests that network personlization be deactivated
- *
- * "data" is const char **
- * ((const char **)(data))[0]] is network depersonlization code
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  PASSWORD_INCORRECT
- *     (code is invalid)
- */
-
-#define RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION 8
-
-/**
- * RIL_REQUEST_GET_CURRENT_CALLS
- *
- * Requests current call list
- *
- * "data" is NULL
- *
- * "response" must be a "const RIL_Call **"
- *
- * Valid errors:
- *
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *      (request will be made again in a few hundred msec)
- */
-
-#define RIL_REQUEST_GET_CURRENT_CALLS 9
-
-
-/**
- * RIL_REQUEST_DIAL
- *
- * Initiate voice call
- *
- * "data" is const RIL_Dial *
- * "response" is NULL
- *
- * This method is never used for supplementary service codes
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  DIAL_MODIFIED_TO_USSD
- *  DIAL_MODIFIED_TO_SS
- *  DIAL_MODIFIED_TO_DIAL
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_DIAL 10
-
-/**
- * RIL_REQUEST_GET_IMSI
- *
- * Get the SIM IMSI
- *
- * Only valid when radio state is "RADIO_STATE_ON"
- *
- * "data" is const char **
- * ((const char **)data)[0] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- * "response" is a const char * containing the IMSI
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_GET_IMSI 11
-
-/**
- * RIL_REQUEST_HANGUP
- *
- * Hang up a specific line (like AT+CHLD=1x)
- *
- * After this HANGUP request returns, RIL should show the connection is NOT
- * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
- *
- * "data" is an int *
- * (int *)data)[0] contains Connection index (value of 'x' in CHLD above)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_HANGUP 12
-
-/**
- * RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND
- *
- * Hang up waiting or held (like AT+CHLD=0)
- *
- * After this HANGUP request returns, RIL should show the connection is NOT
- * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND 13
-
-/**
- * RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND
- *
- * Hang up waiting or held (like AT+CHLD=1)
- *
- * After this HANGUP request returns, RIL should show the connection is NOT
- * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND 14
-
-/**
- * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE
- *
- * Switch waiting or holding call and active call (like AT+CHLD=2)
- *
- * State transitions should be is follows:
- *
- * If call 1 is waiting and call 2 is active, then if this re
- *
- *   BEFORE                               AFTER
- * Call 1   Call 2                 Call 1       Call 2
- * ACTIVE   HOLDING                HOLDING     ACTIVE
- * ACTIVE   WAITING                HOLDING     ACTIVE
- * HOLDING  WAITING                HOLDING     ACTIVE
- * ACTIVE   IDLE                   HOLDING     IDLE
- * IDLE     IDLE                   IDLE        IDLE
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE 15
-#define RIL_REQUEST_SWITCH_HOLDING_AND_ACTIVE 15
-
-/**
- * RIL_REQUEST_CONFERENCE
- *
- * Conference holding and active (like AT+CHLD=3)
-
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_CONFERENCE 16
-
-/**
- * RIL_REQUEST_UDUB
- *
- * Send UDUB (user determined used busy) to ringing or
- * waiting call answer)(RIL_BasicRequest r);
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_UDUB 17
-
-/**
- * RIL_REQUEST_LAST_CALL_FAIL_CAUSE
- *
- * Requests the failure cause code for the most recently terminated call
- *
- * "data" is NULL
- * "response" is a "int *"
- * ((int *)response)[0] is RIL_LastCallFailCause.  GSM failure reasons are
- * mapped to cause codes defined in TS 24.008 Annex H where possible. CDMA
- * failure reasons are derived from the possible call failure scenarios
- * described in the "CDMA IS-2000 Release A (C.S0005-A v6.0)" standard.
- *
- * The implementation should return CALL_FAIL_ERROR_UNSPECIFIED for blocked
- * MO calls by restricted state (See RIL_UNSOL_RESTRICTED_STATE_CHANGED)
- *
- * If the implementation does not have access to the exact cause codes,
- * then it should return one of the values listed in RIL_LastCallFailCause,
- * as the UI layer needs to distinguish these cases for tone generation or
- * error notification.
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE
- */
-#define RIL_REQUEST_LAST_CALL_FAIL_CAUSE 18
-
-/**
- * RIL_REQUEST_SIGNAL_STRENGTH
- *
- * Requests current signal strength and associated information
- *
- * Must succeed if radio is on.
- *
- * "data" is NULL
- *
- * "response" is a const RIL_SignalStrength *
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- */
-#define RIL_REQUEST_SIGNAL_STRENGTH 19
-
-/**
- * RIL_REQUEST_VOICE_REGISTRATION_STATE
- *
- * Request current registration state
- *
- * "data" is NULL
- * "response" is a "char **"
- * ((const char **)response)[0] is registration state 0-6,
- *              0 - Not registered, MT is not currently searching
- *                  a new operator to register
- *              1 - Registered, home network
- *              2 - Not registered, but MT is currently searching
- *                  a new operator to register
- *              3 - Registration denied
- *              4 - Unknown
- *              5 - Registered, roaming
- *             10 - Same as 0, but indicates that emergency calls
- *                  are enabled.
- *             12 - Same as 2, but indicates that emergency calls
- *                  are enabled.
- *             13 - Same as 3, but indicates that emergency calls
- *                  are enabled.
- *             14 - Same as 4, but indicates that emergency calls
- *                  are enabled.
- *
- * ((const char **)response)[1] is LAC if registered on a GSM/WCDMA system or
- *                              NULL if not.Valid LAC are 0x0000 - 0xffff
- * ((const char **)response)[2] is CID if registered on a * GSM/WCDMA or
- *                              NULL if not.
- *                                 Valid CID are 0x00000000 - 0xffffffff
- *                                    In GSM, CID is Cell ID (see TS 27.007)
- *                                            in 16 bits
- *                                    In UMTS, CID is UMTS Cell Identity
- *                                             (see TS 25.331) in 28 bits
- * ((const char **)response)[3] indicates the available voice radio technology,
- *                              valid values as defined by RIL_RadioTechnology.
- * ((const char **)response)[4] is Base Station ID if registered on a CDMA
- *                              system or NULL if not.  Base Station ID in
- *                              decimal format
- * ((const char **)response)[5] is Base Station latitude if registered on a
- *                              CDMA system or NULL if not. Base Station
- *                              latitude is a decimal number as specified in
- *                              3GPP2 C.S0005-A v6.0. It is represented in
- *                              units of 0.25 seconds and ranges from -1296000
- *                              to 1296000, both values inclusive (corresponding
- *                              to a range of -90 to +90 degrees).
- * ((const char **)response)[6] is Base Station longitude if registered on a
- *                              CDMA system or NULL if not. Base Station
- *                              longitude is a decimal number as specified in
- *                              3GPP2 C.S0005-A v6.0. It is represented in
- *                              units of 0.25 seconds and ranges from -2592000
- *                              to 2592000, both values inclusive (corresponding
- *                              to a range of -180 to +180 degrees).
- * ((const char **)response)[7] is concurrent services support indicator if
- *                              registered on a CDMA system 0-1.
- *                                   0 - Concurrent services not supported,
- *                                   1 - Concurrent services supported
- * ((const char **)response)[8] is System ID if registered on a CDMA system or
- *                              NULL if not. Valid System ID are 0 - 32767
- * ((const char **)response)[9] is Network ID if registered on a CDMA system or
- *                              NULL if not. Valid System ID are 0 - 65535
- * ((const char **)response)[10] is the TSB-58 Roaming Indicator if registered
- *                               on a CDMA or EVDO system or NULL if not. Valid values
- *                               are 0-255.
- * ((const char **)response)[11] indicates whether the current system is in the
- *                               PRL if registered on a CDMA or EVDO system or NULL if
- *                               not. 0=not in the PRL, 1=in the PRL
- * ((const char **)response)[12] is the default Roaming Indicator from the PRL,
- *                               if registered on a CDMA or EVDO system or NULL if not.
- *                               Valid values are 0-255.
- * ((const char **)response)[13] if registration state is 3 (Registration
- *                               denied) this is an enumerated reason why
- *                               registration was denied.  See 3GPP TS 24.008,
- *                               10.5.3.6 and Annex G.
- *                                 0 - General
- *                                 1 - Authentication Failure
- *                                 2 - IMSI unknown in HLR
- *                                 3 - Illegal MS
- *                                 4 - Illegal ME
- *                                 5 - PLMN not allowed
- *                                 6 - Location area not allowed
- *                                 7 - Roaming not allowed
- *                                 8 - No Suitable Cells in this Location Area
- *                                 9 - Network failure
- *                                10 - Persistent location update reject
- *                                11 - PLMN not allowed
- *                                12 - Location area not allowed
- *                                13 - Roaming not allowed in this Location Area
- *                                15 - No Suitable Cells in this Location Area
- *                                17 - Network Failure
- *                                20 - MAC Failure
- *                                21 - Sync Failure
- *                                22 - Congestion
- *                                23 - GSM Authentication unacceptable
- *                                25 - Not Authorized for this CSG
- *                                32 - Service option not supported
- *                                33 - Requested service option not subscribed
- *                                34 - Service option temporarily out of order
- *                                38 - Call cannot be identified
- *                                48-63 - Retry upon entry into a new cell
- *                                95 - Semantically incorrect message
- *                                96 - Invalid mandatory information
- *                                97 - Message type non-existent or not implemented
- *                                98 - Message not compatible with protocol state
- *                                99 - Information element non-existent or not implemented
- *                               100 - Conditional IE error
- *                               101 - Message not compatible with protocol state
- *                               111 - Protocol error, unspecified
- * ((const char **)response)[14] is the Primary Scrambling Code of the current
- *                               cell as described in TS 25.331, in hexadecimal
- *                               format, or NULL if unknown or not registered
- *                               to a UMTS network.
- *
- * Please note that registration state 4 ("unknown") is treated
- * as "out of service" in the Android telephony system
- *
- * Registration state 3 can be returned if Location Update Reject
- * (with cause 17 - Network Failure) is received repeatedly from the network,
- * to facilitate "managed roaming"
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_VOICE_REGISTRATION_STATE 20
-
-/**
- * RIL_REQUEST_DATA_REGISTRATION_STATE
- *
- * Request current DATA registration state
- *
- * "data" is NULL
- * "response" is a "char **"
- * ((const char **)response)[0] is registration state 0-5 from TS 27.007 10.1.20 AT+CGREG
- * ((const char **)response)[1] is LAC if registered or NULL if not
- * ((const char **)response)[2] is CID if registered or NULL if not
- * ((const char **)response)[3] indicates the available data radio technology,
- *                              valid values as defined by RIL_RadioTechnology.
- * ((const char **)response)[4] if registration state is 3 (Registration
- *                               denied) this is an enumerated reason why
- *                               registration was denied.  See 3GPP TS 24.008,
- *                               Annex G.6 "Additonal cause codes for GMM".
- *      7 == GPRS services not allowed
- *      8 == GPRS services and non-GPRS services not allowed
- *      9 == MS identity cannot be derived by the network
- *      10 == Implicitly detached
- *      14 == GPRS services not allowed in this PLMN
- *      16 == MSC temporarily not reachable
- *      40 == No PDP context activated
- * ((const char **)response)[5] The maximum number of simultaneous Data Calls that can be
- *                              established using RIL_REQUEST_SETUP_DATA_CALL.
- *
- * The values at offsets 6..10 are optional LTE location information in decimal.
- * If a value is unknown that value may be NULL. If all values are NULL,
- * none need to be present.
- *  ((const char **)response)[6] is TAC, a 16-bit Tracking Area Code.
- *  ((const char **)response)[7] is CID, a 0-503 Physical Cell Identifier.
- *  ((const char **)response)[8] is ECI, a 28-bit E-UTRAN Cell Identifier.
- *  ((const char **)response)[9] is CSGID, a 27-bit Closed Subscriber Group Identity.
- *  ((const char **)response)[10] is TADV, a 6-bit timing advance value.
- *
- * LAC and CID are in hexadecimal format.
- * valid LAC are 0x0000 - 0xffff
- * valid CID are 0x00000000 - 0x0fffffff
- *
- * Please note that registration state 4 ("unknown") is treated
- * as "out of service" in the Android telephony system
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_DATA_REGISTRATION_STATE 21
-
-/**
- * RIL_REQUEST_OPERATOR
- *
- * Request current operator ONS or EONS
- *
- * "data" is NULL
- * "response" is a "const char **"
- * ((const char **)response)[0] is long alpha ONS or EONS
- *                                  or NULL if unregistered
- *
- * ((const char **)response)[1] is short alpha ONS or EONS
- *                                  or NULL if unregistered
- * ((const char **)response)[2] is 5 or 6 digit numeric code (MCC + MNC)
- *                                  or NULL if unregistered
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_OPERATOR 22
-
-/**
- * RIL_REQUEST_RADIO_POWER
- *
- * Toggle radio on and off (for "airplane" mode)
- * If the radio is is turned off/on the radio modem subsystem
- * is expected return to an initialized state. For instance,
- * any voice and data calls will be terminated and all associated
- * lists emptied.
- *
- * "data" is int *
- * ((int *)data)[0] is > 0 for "Radio On"
- * ((int *)data)[0] is == 0 for "Radio Off"
- *
- * "response" is NULL
- *
- * Turn radio on if "on" > 0
- * Turn radio off if "on" == 0
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_RADIO_POWER 23
-
-/**
- * RIL_REQUEST_DTMF
- *
- * Send a DTMF tone
- *
- * If the implementation is currently playing a tone requested via
- * RIL_REQUEST_DTMF_START, that tone should be cancelled and the new tone
- * should be played instead
- *
- * "data" is a char * containing a single character with one of 12 values: 0-9,*,#
- * "response" is NULL
- *
- * FIXME should this block/mute microphone?
- * How does this interact with local DTMF feedback?
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_DTMF_STOP, RIL_REQUEST_DTMF_START
- *
- */
-#define RIL_REQUEST_DTMF 24
-
-/**
- * RIL_REQUEST_SEND_SMS
- *
- * Send an SMS message
- *
- * "data" is const char **
- * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed
- *      by a length byte (as expected by TS 27.005) or NULL for default SMSC
- * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string
- *      less the SMSC address
- *      TP-Layer-Length is be "strlen(((const char **)data)[1])/2"
- *
- * "response" is a const RIL_SMS_Response *
- *
- * Based on the return error, caller decides to resend if sending sms
- * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
- * and GENERIC_FAILURE means no retry (i.e. error cause is 500)
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SMS_SEND_FAIL_RETRY
- *  FDN_CHECK_FAILURE
- *  GENERIC_FAILURE
- *
- * FIXME how do we specify TP-Message-Reference if we need to resend?
- */
-#define RIL_REQUEST_SEND_SMS 25
-
-
-/**
- * RIL_REQUEST_SEND_SMS_EXPECT_MORE
- *
- * Send an SMS message. Identical to RIL_REQUEST_SEND_SMS,
- * except that more messages are expected to be sent soon. If possible,
- * keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command)
- *
- * "data" is const char **
- * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed
- *      by a length byte (as expected by TS 27.005) or NULL for default SMSC
- * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string
- *      less the SMSC address
- *      TP-Layer-Length is be "strlen(((const char **)data)[1])/2"
- *
- * "response" is a const RIL_SMS_Response *
- *
- * Based on the return error, caller decides to resend if sending sms
- * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
- * and GENERIC_FAILURE means no retry (i.e. error cause is 500)
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SMS_SEND_FAIL_RETRY
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_SEND_SMS_EXPECT_MORE 26
-
-
-/**
- * RIL_REQUEST_SETUP_DATA_CALL
- *
- * Setup a packet data connection. If RIL_Data_Call_Response_v6.status
- * return success it is added to the list of data calls and a
- * RIL_UNSOL_DATA_CALL_LIST_CHANGED is sent. The call remains in the
- * list until RIL_REQUEST_DEACTIVATE_DATA_CALL is issued or the
- * radio is powered off/on. This list is returned by RIL_REQUEST_DATA_CALL_LIST
- * and RIL_UNSOL_DATA_CALL_LIST_CHANGED.
- *
- * The RIL is expected to:
- *  - Create one data call context.
- *  - Create and configure a dedicated interface for the context
- *  - The interface must be point to point.
- *  - The interface is configured with one or more addresses and
- *    is capable of sending and receiving packets. The prefix length
- *    of the addresses must be /32 for IPv4 and /128 for IPv6.
- *  - Must NOT change the linux routing table.
- *  - Support up to RIL_REQUEST_DATA_REGISTRATION_STATE response[5]
- *    number of simultaneous data call contexts.
- *
- * "data" is a const char **
- * ((const char **)data)[0] Radio technology to use: 0-CDMA, 1-GSM/UMTS, 2...
- *                          for values above 2 this is RIL_RadioTechnology + 2.
- * ((const char **)data)[1] is a RIL_DataProfile (support is optional)
- * ((const char **)data)[2] is the APN to connect to if radio technology is GSM/UMTS. This APN will
- *                          override the one in the profile. NULL indicates no APN overrride.
- * ((const char **)data)[3] is the username for APN, or NULL
- * ((const char **)data)[4] is the password for APN, or NULL
- * ((const char **)data)[5] is the PAP / CHAP auth type. Values:
- *                          0 => PAP and CHAP is never performed.
- *                          1 => PAP may be performed; CHAP is never performed.
- *                          2 => CHAP may be performed; PAP is never performed.
- *                          3 => PAP / CHAP may be performed - baseband dependent.
- * ((const char **)data)[6] is the connection type to request must be one of the
- *                          PDP_type values in TS 27.007 section 10.1.1.
- *                          For example, "IP", "IPV6", "IPV4V6", or "PPP".
- * ((const char **)data)[7] Optional connection property parameters, format to be defined.
- *
- * "response" is a RIL_Data_Call_Response_v11
- *
- * FIXME may need way to configure QoS settings
- *
- * Valid errors:
- *  SUCCESS should be returned on both success and failure of setup with
- *  the RIL_Data_Call_Response_v6.status containing the actual status.
- *  For all other errors the RIL_Data_Call_Resonse_v6 is ignored.
- *
- *  Other errors could include:
- *    RADIO_NOT_AVAILABLE, GENERIC_FAILURE, OP_NOT_ALLOWED_BEFORE_REG_TO_NW,
- *    OP_NOT_ALLOWED_DURING_VOICE_CALL and REQUEST_NOT_SUPPORTED.
- *
- * See also: RIL_REQUEST_DEACTIVATE_DATA_CALL
- */
-#define RIL_REQUEST_SETUP_DATA_CALL 27
-
-
-/**
- * RIL_REQUEST_SIM_IO
- *
- * Request SIM I/O operation.
- * This is similar to the TS 27.007 "restricted SIM" operation
- * where it assumes all of the EF selection will be done by the
- * callee.
- *
- * "data" is a const RIL_SIM_IO_v6 *
- * Please note that RIL_SIM_IO has a "PIN2" field which may be NULL,
- * or may specify a PIN2 for operations that require a PIN2 (eg
- * updating FDN records)
- *
- * "response" is a const RIL_SIM_IO_Response *
- *
- * Arguments and responses that are unused for certain
- * values of "command" should be ignored or set to NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *  SIM_PIN2
- *  SIM_PUK2
- */
-#define RIL_REQUEST_SIM_IO 28
-
-/**
- * RIL_REQUEST_SEND_USSD
- *
- * Send a USSD message
- *
- * If a USSD session already exists, the message should be sent in the
- * context of that session. Otherwise, a new session should be created.
- *
- * The network reply should be reported via RIL_UNSOL_ON_USSD
- *
- * Only one USSD session may exist at a time, and the session is assumed
- * to exist until:
- *   a) The android system invokes RIL_REQUEST_CANCEL_USSD
- *   b) The implementation sends a RIL_UNSOL_ON_USSD with a type code
- *      of "0" (USSD-Notify/no further action) or "2" (session terminated)
- *
- * "data" is a const char * containing the USSD request in UTF-8 format
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  FDN_CHECK_FAILURE
- *  USSD_MODIFIED_TO_DIAL
- *  USSD_MODIFIED_TO_SS
- *  USSD_MODIFIED_TO_USSD
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_CANCEL_USSD, RIL_UNSOL_ON_USSD
- */
-
-#define RIL_REQUEST_SEND_USSD 29
-
-/**
- * RIL_REQUEST_CANCEL_USSD
- *
- * Cancel the current USSD session if one exists
- *
- * "data" is null
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_CANCEL_USSD 30
-
-/**
- * RIL_REQUEST_GET_CLIR
- *
- * Gets current CLIR status
- * "data" is NULL
- * "response" is int *
- * ((int *)data)[0] is "n" parameter from TS 27.007 7.7
- * ((int *)data)[1] is "m" parameter from TS 27.007 7.7
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_GET_CLIR 31
-
-/**
- * RIL_REQUEST_SET_CLIR
- *
- * "data" is int *
- * ((int *)data)[0] is "n" parameter from TS 27.007 7.7
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_CLIR 32
-
-/**
- * RIL_REQUEST_QUERY_CALL_FORWARD_STATUS
- *
- * "data" is const RIL_CallForwardInfo *
- *
- * "response" is const RIL_CallForwardInfo **
- * "response" points to an array of RIL_CallForwardInfo *'s, one for
- * each distinct registered phone number.
- *
- * For example, if data is forwarded to +18005551212 and voice is forwarded
- * to +18005559999, then two separate RIL_CallForwardInfo's should be returned
- *
- * If, however, both data and voice are forwarded to +18005551212, then
- * a single RIL_CallForwardInfo can be returned with the service class
- * set to "data + voice = 3")
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 33
-
-
-/**
- * RIL_REQUEST_SET_CALL_FORWARD
- *
- * Configure call forward rule
- *
- * "data" is const RIL_CallForwardInfo *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_CALL_FORWARD 34
-
-
-/**
- * RIL_REQUEST_QUERY_CALL_WAITING
- *
- * Query current call waiting state
- *
- * "data" is const int *
- * ((const int *)data)[0] is the TS 27.007 service class to query.
- * "response" is a const int *
- * ((const int *)response)[0] is 0 for "disabled" and 1 for "enabled"
- *
- * If ((const int *)response)[0] is = 1, then ((const int *)response)[1]
- * must follow, with the TS 27.007 service class bit vector of services
- * for which call waiting is enabled.
- *
- * For example, if ((const int *)response)[0]  is 1 and
- * ((const int *)response)[1] is 3, then call waiting is enabled for data
- * and voice and disabled for everything else
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_QUERY_CALL_WAITING 35
-
-
-/**
- * RIL_REQUEST_SET_CALL_WAITING
- *
- * Configure current call waiting state
- *
- * "data" is const int *
- * ((const int *)data)[0] is 0 for "disabled" and 1 for "enabled"
- * ((const int *)data)[1] is the TS 27.007 service class bit vector of
- *                           services to modify
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_CALL_WAITING 36
-
-/**
- * RIL_REQUEST_SMS_ACKNOWLEDGE
- *
- * Acknowledge successful or failed receipt of SMS previously indicated
- * via RIL_UNSOL_RESPONSE_NEW_SMS
- *
- * "data" is int *
- * ((int *)data)[0] is 1 on successful receipt
- *                  (basically, AT+CNMA=1 from TS 27.005
- *                  is 0 on failed receipt
- *                  (basically, AT+CNMA=2 from TS 27.005)
- * ((int *)data)[1] if data[0] is 0, this contains the failure cause as defined
- *                  in TS 23.040, 9.2.3.22. Currently only 0xD3 (memory
- *                  capacity exceeded) and 0xFF (unspecified error) are
- *                  reported.
- *
- * "response" is NULL
- *
- * FIXME would like request that specified RP-ACK/RP-ERROR PDU
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SMS_ACKNOWLEDGE  37
-
-/**
- * RIL_REQUEST_GET_IMEI - DEPRECATED
- *
- * Get the device IMEI, including check digit
- *
- * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY
- * Valid when RadioState is not RADIO_STATE_UNAVAILABLE
- *
- * "data" is NULL
- * "response" is a const char * containing the IMEI
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_GET_IMEI 38
-
-/**
- * RIL_REQUEST_GET_IMEISV - DEPRECATED
- *
- * Get the device IMEISV, which should be two decimal digits
- *
- * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY
- * Valid when RadioState is not RADIO_STATE_UNAVAILABLE
- *
- * "data" is NULL
- * "response" is a const char * containing the IMEISV
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_GET_IMEISV 39
-
-
-/**
- * RIL_REQUEST_ANSWER
- *
- * Answer incoming call
- *
- * Will not be called for WAITING calls.
- * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE will be used in this case
- * instead
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_ANSWER 40
-
-/**
- * RIL_REQUEST_DEACTIVATE_DATA_CALL
- *
- * Deactivate packet data connection and remove from the
- * data call list if SUCCESS is returned. Any other return
- * values should also try to remove the call from the list,
- * but that may not be possible. In any event a
- * RIL_REQUEST_RADIO_POWER off/on must clear the list. An
- * RIL_UNSOL_DATA_CALL_LIST_CHANGED is not expected to be
- * issued because of an RIL_REQUEST_DEACTIVATE_DATA_CALL.
- *
- * "data" is const char **
- * ((char**)data)[0] indicating CID
- * ((char**)data)[1] indicating Disconnect Reason
- *                   0 => No specific reason specified
- *                   1 => Radio shutdown requested
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_SETUP_DATA_CALL
- */
-#define RIL_REQUEST_DEACTIVATE_DATA_CALL 41
-
-/**
- * RIL_REQUEST_QUERY_FACILITY_LOCK
- *
- * Query the status of a facility lock state
- *
- * "data" is const char **
- * ((const char **)data)[0] is the facility string code from TS 27.007 7.4
- *                      (eg "AO" for BAOC, "SC" for SIM lock)
- * ((const char **)data)[1] is the password, or "" if not required
- * ((const char **)data)[2] is the TS 27.007 service class bit vector of
- *                           services to query
- * ((const char **)data)[3] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *                            This is only applicable in the case of Fixed Dialing Numbers
- *                            (FDN) requests.
- *
- * "response" is an int *
- * ((const int *)response) 0 is the TS 27.007 service class bit vector of
- *                           services for which the specified barring facility
- *                           is active. "0" means "disabled for all"
- *
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_QUERY_FACILITY_LOCK 42
-
-/**
- * RIL_REQUEST_SET_FACILITY_LOCK
- *
- * Enable/disable one facility lock
- *
- * "data" is const char **
- *
- * ((const char **)data)[0] = facility string code from TS 27.007 7.4
- * (eg "AO" for BAOC)
- * ((const char **)data)[1] = "0" for "unlock" and "1" for "lock"
- * ((const char **)data)[2] = password
- * ((const char **)data)[3] = string representation of decimal TS 27.007
- *                            service class bit vector. Eg, the string
- *                            "1" means "set this facility for voice services"
- * ((const char **)data)[4] = AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *                            This is only applicable in the case of Fixed Dialing Numbers
- *                            (FDN) requests.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_SET_FACILITY_LOCK 43
-
-/**
- * RIL_REQUEST_CHANGE_BARRING_PASSWORD
- *
- * Change call barring facility password
- *
- * "data" is const char **
- *
- * ((const char **)data)[0] = facility string code from TS 27.007 7.4
- * (eg "AO" for BAOC)
- * ((const char **)data)[1] = old password
- * ((const char **)data)[2] = new password
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CHANGE_BARRING_PASSWORD 44
-
-/**
- * RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE
- *
- * Query current network selectin mode
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((const int *)response)[0] is
- *     0 for automatic selection
- *     1 for manual selection
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE 45
-
-/**
- * RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC
- *
- * Specify that the network should be selected automatically
- *
- * "data" is NULL
- * "response" is NULL
- *
- * This request must not respond until the new operator is selected
- * and registered
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  ILLEGAL_SIM_OR_ME
- *  GENERIC_FAILURE
- *
- * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and
- *       no retries needed, such as illegal SIM or ME.
- *       Returns GENERIC_FAILURE for all other causes that might be
- *       fixed by retries.
- *
- */
-#define RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC 46
-
-/**
- * RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL
- *
- * Manually select a specified network.
- *
- * "data" is const char * specifying MCCMNC of network to select (eg "310170")
- * "response" is NULL
- *
- * This request must not respond until the new operator is selected
- * and registered
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  ILLEGAL_SIM_OR_ME
- *  GENERIC_FAILURE
- *
- * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and
- *       no retries needed, such as illegal SIM or ME.
- *       Returns GENERIC_FAILURE for all other causes that might be
- *       fixed by retries.
- *
- */
-#define RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL 47
-
-/**
- * RIL_REQUEST_QUERY_AVAILABLE_NETWORKS
- *
- * Scans for available networks
- *
- * "data" is NULL
- * "response" is const char ** that should be an array of n*4 strings, where
- *    n is the number of available networks
- * For each available network:
- *
- * ((const char **)response)[n+0] is long alpha ONS or EONS
- * ((const char **)response)[n+1] is short alpha ONS or EONS
- * ((const char **)response)[n+2] is 5 or 6 digit numeric code (MCC + MNC)
- * ((const char **)response)[n+3] is a string value of the status:
- *           "unknown"
- *           "available"
- *           "current"
- *           "forbidden"
- *
- * This request must not respond until the new operator is selected
- * and registered
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_QUERY_AVAILABLE_NETWORKS 48
-
-/**
- * RIL_REQUEST_DTMF_START
- *
- * Start playing a DTMF tone. Continue playing DTMF tone until
- * RIL_REQUEST_DTMF_STOP is received
- *
- * If a RIL_REQUEST_DTMF_START is received while a tone is currently playing,
- * it should cancel the previous tone and play the new one.
- *
- * "data" is a char *
- * ((char *)data)[0] is a single character with one of 12 values: 0-9,*,#
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_STOP
- */
-#define RIL_REQUEST_DTMF_START 49
-
-/**
- * RIL_REQUEST_DTMF_STOP
- *
- * Stop playing a currently playing DTMF tone.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_START
- */
-#define RIL_REQUEST_DTMF_STOP 50
-
-/**
- * RIL_REQUEST_BASEBAND_VERSION
- *
- * Return string value indicating baseband version, eg
- * response from AT+CGMR
- *
- * "data" is NULL
- * "response" is const char * containing version string for log reporting
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_BASEBAND_VERSION 51
-
-/**
- * RIL_REQUEST_SEPARATE_CONNECTION
- *
- * Separate a party from a multiparty call placing the multiparty call
- * (less the specified party) on hold and leaving the specified party
- * as the only other member of the current (active) call
- *
- * Like AT+CHLD=2x
- *
- * See TS 22.084 1.3.8.2 (iii)
- * TS 22.030 6.5.5 "Entering "2X followed by send"
- * TS 27.007 "AT+CHLD=2x"
- *
- * "data" is an int *
- * (int *)data)[0] contains Connection index (value of 'x' in CHLD above) "response" is NULL
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SEPARATE_CONNECTION 52
-
-
-/**
- * RIL_REQUEST_SET_MUTE
- *
- * Turn on or off uplink (microphone) mute.
- *
- * Will only be sent while voice call is active.
- * Will always be reset to "disable mute" when a new voice call is initiated
- *
- * "data" is an int *
- * (int *)data)[0] is 1 for "enable mute" and 0 for "disable mute"
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_SET_MUTE 53
-
-/**
- * RIL_REQUEST_GET_MUTE
- *
- * Queries the current state of the uplink mute setting
- *
- * "data" is NULL
- * "response" is an int *
- * (int *)response)[0] is 1 for "mute enabled" and 0 for "mute disabled"
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  SS_MODIFIED_TO_DIAL
- *  SS_MODIFIED_TO_USSD
- *  SS_MODIFIED_TO_SS
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_GET_MUTE 54
-
-/**
- * RIL_REQUEST_QUERY_CLIP
- *
- * Queries the status of the CLIP supplementary service
- *
- * (for MMI code "*#30#")
- *
- * "data" is NULL
- * "response" is an int *
- * (int *)response)[0] is 1 for "CLIP provisioned"
- *                           and 0 for "CLIP not provisioned"
- *                           and 2 for "unknown, e.g. no network etc"
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_QUERY_CLIP 55
-
-/**
- * RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE - Deprecated use the status
- * field in RIL_Data_Call_Response_v6.
- *
- * Requests the failure cause code for the most recently failed PDP
- * context or CDMA data connection active
- * replaces RIL_REQUEST_LAST_PDP_FAIL_CAUSE
- *
- * "data" is NULL
- *
- * "response" is a "int *"
- * ((int *)response)[0] is an integer cause code defined in TS 24.008
- *   section 6.1.3.1.3 or close approximation
- *
- * If the implementation does not have access to the exact cause codes,
- * then it should return one of the values listed in
- * RIL_DataCallFailCause, as the UI layer needs to distinguish these
- * cases for error notification
- * and potential retries.
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_LAST_CALL_FAIL_CAUSE
- *
- * Deprecated use the status field in RIL_Data_Call_Response_v6.
- */
-
-#define RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE 56
-
-/**
- * RIL_REQUEST_DATA_CALL_LIST
- *
- * Returns the data call list. An entry is added when a
- * RIL_REQUEST_SETUP_DATA_CALL is issued and removed on a
- * RIL_REQUEST_DEACTIVATE_DATA_CALL. The list is emptied
- * when RIL_REQUEST_RADIO_POWER off/on is issued.
- *
- * "data" is NULL
- * "response" is an array of RIL_Data_Call_Response_v6
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *
- * See also: RIL_UNSOL_DATA_CALL_LIST_CHANGED
- */
-
-#define RIL_REQUEST_DATA_CALL_LIST 57
-
-/**
- * RIL_REQUEST_RESET_RADIO - DEPRECATED
- *
- * Request a radio reset. The RIL implementation may postpone
- * the reset until after this request is responded to if the baseband
- * is presently busy.
- *
- * The request is DEPRECATED, use RIL_REQUEST_RADIO_POWER
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  REQUEST_NOT_SUPPORTED
- */
-
-#define RIL_REQUEST_RESET_RADIO 58
-
-/**
- * RIL_REQUEST_OEM_HOOK_RAW
- *
- * This request reserved for OEM-specific uses. It passes raw byte arrays
- * back and forth.
- *
- * It can be invoked on the Java side from
- * com.android.internal.telephony.Phone.invokeOemRilRequestRaw()
- *
- * "data" is a char * of bytes copied from the byte[] data argument in java
- * "response" is a char * of bytes that will returned via the
- * caller's "response" Message here:
- * (byte[])(((AsyncResult)response.obj).result)
- *
- * An error response here will result in
- * (((AsyncResult)response.obj).result) == null and
- * (((AsyncResult)response.obj).exception) being an instance of
- * com.android.internal.telephony.gsm.CommandException
- *
- * Valid errors:
- *  All
- */
-
-#define RIL_REQUEST_OEM_HOOK_RAW 59
-
-/**
- * RIL_REQUEST_OEM_HOOK_STRINGS
- *
- * This request reserved for OEM-specific uses. It passes strings
- * back and forth.
- *
- * It can be invoked on the Java side from
- * com.android.internal.telephony.Phone.invokeOemRilRequestStrings()
- *
- * "data" is a const char **, representing an array of null-terminated UTF-8
- * strings copied from the "String[] strings" argument to
- * invokeOemRilRequestStrings()
- *
- * "response" is a const char **, representing an array of null-terminated UTF-8
- * stings that will be returned via the caller's response message here:
- *
- * (String[])(((AsyncResult)response.obj).result)
- *
- * An error response here will result in
- * (((AsyncResult)response.obj).result) == null and
- * (((AsyncResult)response.obj).exception) being an instance of
- * com.android.internal.telephony.gsm.CommandException
- *
- * Valid errors:
- *  All
- */
-
-#define RIL_REQUEST_OEM_HOOK_STRINGS 60
-
-/**
- * RIL_REQUEST_SCREEN_STATE
- *
- * Indicates the current state of the screen.  When the screen is off, the
- * RIL should notify the baseband to suppress certain notifications (eg,
- * signal strength and changes in LAC/CID or BID/SID/NID/latitude/longitude)
- * in an effort to conserve power.  These notifications should resume when the
- * screen is on.
- *
- * "data" is int *
- * ((int *)data)[0] is == 1 for "Screen On"
- * ((int *)data)[0] is == 0 for "Screen Off"
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SCREEN_STATE 61
-
-
-/**
- * RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION
- *
- * Enables/disables supplementary service related notifications
- * from the network.
- *
- * Notifications are reported via RIL_UNSOL_SUPP_SVC_NOTIFICATION.
- *
- * "data" is int *
- * ((int *)data)[0] is == 1 for notifications enabled
- * ((int *)data)[0] is == 0 for notifications disabled
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_UNSOL_SUPP_SVC_NOTIFICATION.
- */
-#define RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION 62
-
-/**
- * RIL_REQUEST_WRITE_SMS_TO_SIM
- *
- * Stores a SMS message to SIM memory.
- *
- * "data" is RIL_SMS_WriteArgs *
- *
- * "response" is int *
- * ((const int *)response)[0] is the record index where the message is stored.
- *
- * Valid errors:
- *  SUCCESS
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_WRITE_SMS_TO_SIM 63
-
-/**
- * RIL_REQUEST_DELETE_SMS_ON_SIM
- *
- * Deletes a SMS message from SIM memory.
- *
- * "data" is int  *
- * ((int *)data)[0] is the record index of the message to delete.
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_DELETE_SMS_ON_SIM 64
-
-/**
- * RIL_REQUEST_SET_BAND_MODE
- *
- * Assign a specified band for RF configuration.
- *
- * "data" is int *
- * ((int *)data)[0] is == 0 for "unspecified" (selected by baseband automatically)
- * ((int *)data)[0] is == 1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000)
- * ((int *)data)[0] is == 2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900)
- * ((int *)data)[0] is == 3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000)
- * ((int *)data)[0] is == 4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000)
- * ((int *)data)[0] is == 5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850)
- * ((int *)data)[0] is == 6 for "Cellular (800-MHz Band)"
- * ((int *)data)[0] is == 7 for "PCS (1900-MHz Band)"
- * ((int *)data)[0] is == 8 for "Band Class 3 (JTACS Band)"
- * ((int *)data)[0] is == 9 for "Band Class 4 (Korean PCS Band)"
- * ((int *)data)[0] is == 10 for "Band Class 5 (450-MHz Band)"
- * ((int *)data)[0] is == 11 for "Band Class 6 (2-GMHz IMT2000 Band)"
- * ((int *)data)[0] is == 12 for "Band Class 7 (Upper 700-MHz Band)"
- * ((int *)data)[0] is == 13 for "Band Class 8 (1800-MHz Band)"
- * ((int *)data)[0] is == 14 for "Band Class 9 (900-MHz Band)"
- * ((int *)data)[0] is == 15 for "Band Class 10 (Secondary 800-MHz Band)"
- * ((int *)data)[0] is == 16 for "Band Class 11 (400-MHz European PAMR Band)"
- * ((int *)data)[0] is == 17 for "Band Class 15 (AWS Band)"
- * ((int *)data)[0] is == 18 for "Band Class 16 (US 2.5-GHz Band)"
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_BAND_MODE 65
-
-/**
- * RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE
- *
- * Query the list of band mode supported by RF.
- *
- * "data" is NULL
- *
- * "response" is int *
- * "response" points to an array of int's, the int[0] is the size of array, reset is one for
- * each available band mode.
- *
- *  0 for "unspecified" (selected by baseband automatically)
- *  1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000)
- *  2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900)
- *  3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000)
- *  4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000)
- *  5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850)
- *  6 for "Cellular (800-MHz Band)"
- *  7 for "PCS (1900-MHz Band)"
- *  8 for "Band Class 3 (JTACS Band)"
- *  9 for "Band Class 4 (Korean PCS Band)"
- *  10 for "Band Class 5 (450-MHz Band)"
- *  11 for "Band Class 6 (2-GMHz IMT2000 Band)"
- *  12 for "Band Class 7 (Upper 700-MHz Band)"
- *  13 for "Band Class 8 (1800-MHz Band)"
- *  14 for "Band Class 9 (900-MHz Band)"
- *  15 for "Band Class 10 (Secondary 800-MHz Band)"
- *  16 for "Band Class 11 (400-MHz European PAMR Band)"
- *  17 for "Band Class 15 (AWS Band)"
- *  18 for "Band Class 16 (US 2.5-GHz Band)"
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_SET_BAND_MODE
- */
-#define RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE 66
-
-/**
- * RIL_REQUEST_STK_GET_PROFILE
- *
- * Requests the profile of SIM tool kit.
- * The profile indicates the SAT/USAT features supported by ME.
- * The SAT/USAT features refer to 3GPP TS 11.14 and 3GPP TS 31.111
- *
- * "data" is NULL
- *
- * "response" is a const char * containing SAT/USAT profile
- * in hexadecimal format string starting with first byte of terminal profile
- *
- * Valid errors:
- *  RIL_E_SUCCESS
- *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- *  RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_GET_PROFILE 67
-
-/**
- * RIL_REQUEST_STK_SET_PROFILE
- *
- * Download the STK terminal profile as part of SIM initialization
- * procedure
- *
- * "data" is a const char * containing SAT/USAT profile
- * in hexadecimal format string starting with first byte of terminal profile
- *
- * "response" is NULL
- *
- * Valid errors:
- *  RIL_E_SUCCESS
- *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- *  RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_SET_PROFILE 68
-
-/**
- * RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND
- *
- * Requests to send a SAT/USAT envelope command to SIM.
- * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111
- *
- * "data" is a const char * containing SAT/USAT command
- * in hexadecimal format string starting with command tag
- *
- * "response" is a const char * containing SAT/USAT response
- * in hexadecimal format string starting with first byte of response
- * (May be NULL)
- *
- * Valid errors:
- *  RIL_E_SUCCESS
- *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- *  RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND 69
-
-/**
- * RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE
- *
- * Requests to send a terminal response to SIM for a received
- * proactive command
- *
- * "data" is a const char * containing SAT/USAT response
- * in hexadecimal format string starting with first byte of response data
- *
- * "response" is NULL
- *
- * Valid errors:
- *  RIL_E_SUCCESS
- *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- *  RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE 70
-
-/**
- * RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM
- *
- * When STK application gets RIL_UNSOL_STK_CALL_SETUP, the call actually has
- * been initialized by ME already. (We could see the call has been in the 'call
- * list') So, STK application needs to accept/reject the call according as user
- * operations.
- *
- * "data" is int *
- * ((int *)data)[0] is > 0 for "accept" the call setup
- * ((int *)data)[0] is == 0 for "reject" the call setup
- *
- * "response" is NULL
- *
- * Valid errors:
- *  RIL_E_SUCCESS
- *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- *  RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM 71
-
-/**
- * RIL_REQUEST_EXPLICIT_CALL_TRANSFER
- *
- * Connects the two calls and disconnects the subscriber from both calls.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_EXPLICIT_CALL_TRANSFER 72
-
-/**
- * RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE
- *
- * Requests to set the preferred network type for searching and registering
- * (CS/PS domain, RAT, and operation mode)
- *
- * "data" is int * which is RIL_PreferredNetworkType
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  MODE_NOT_SUPPORTED
- */
-#define RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE 73
-
-/**
- * RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE
- *
- * Query the preferred network type (CS/PS domain, RAT, and operation mode)
- * for searching and registering
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)reponse)[0] is == RIL_PreferredNetworkType
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE
- */
-#define RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE 74
-
-/**
- * RIL_REQUEST_NEIGHBORING_CELL_IDS
- *
- * Request neighboring cell id in GSM network
- *
- * "data" is NULL
- * "response" must be a " const RIL_NeighboringCell** "
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_GET_NEIGHBORING_CELL_IDS 75
-
-/**
- * RIL_REQUEST_SET_LOCATION_UPDATES
- *
- * Enables/disables network state change notifications due to changes in
- * LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA).
- * Basically +CREG=2 vs. +CREG=1 (TS 27.007).
- *
- * Note:  The RIL implementation should default to "updates enabled"
- * when the screen is on and "updates disabled" when the screen is off.
- *
- * "data" is int *
- * ((int *)data)[0] is == 1 for updates enabled (+CREG=2)
- * ((int *)data)[0] is == 0 for updates disabled (+CREG=1)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_SCREEN_STATE, RIL_UNSOL_RESPONSE_NETWORK_STATE_CHANGED
- */
-#define RIL_REQUEST_SET_LOCATION_UPDATES 76
-
-/**
- * RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE
- *
- * Request to set the location where the CDMA subscription shall
- * be retrieved
- *
- * "data" is int *
- * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *  SIM_ABSENT
- *  SUBSCRIPTION_NOT_AVAILABLE
- *
- * See also: RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE
- */
-#define RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE 77
-
-/**
- * RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE
- *
- * Request to set the roaming preferences in CDMA
- *
- * "data" is int *
- * ((int *)data)[0] is == 0 for Home Networks only, as defined in PRL
- * ((int *)data)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL
- * ((int *)data)[0] is == 2 for Roaming on Any Network, as defined in the PRL
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE 78
-
-/**
- * RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE
- *
- * Request the actual setting of the roaming preferences in CDMA in the modem
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)response)[0] is == 0 for Home Networks only, as defined in PRL
- * ((int *)response)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL
- * ((int *)response)[0] is == 2 for Roaming on Any Network, as defined in the PRL
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE 79
-
-/**
- * RIL_REQUEST_SET_TTY_MODE
- *
- * Request to set the TTY mode
- *
- * "data" is int *
- * ((int *)data)[0] is == 0 for TTY off
- * ((int *)data)[0] is == 1 for TTY Full
- * ((int *)data)[0] is == 2 for TTY HCO (hearing carryover)
- * ((int *)data)[0] is == 3 for TTY VCO (voice carryover)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_TTY_MODE 80
-
-/**
- * RIL_REQUEST_QUERY_TTY_MODE
- *
- * Request the setting of TTY mode
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)response)[0] is == 0 for TTY off
- * ((int *)response)[0] is == 1 for TTY Full
- * ((int *)response)[0] is == 2 for TTY HCO (hearing carryover)
- * ((int *)response)[0] is == 3 for TTY VCO (voice carryover)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_QUERY_TTY_MODE 81
-
-/**
- * RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE
- *
- * Request to set the preferred voice privacy mode used in voice
- * scrambling
- *
- * "data" is int *
- * ((int *)data)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask)
- * ((int *)data)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE 82
-
-/**
- * RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE
- *
- * Request the setting of preferred voice privacy mode
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)response)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask)
- * ((int *)response)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE 83
-
-/**
- * RIL_REQUEST_CDMA_FLASH
- *
- * Send FLASH
- *
- * "data" is const char *
- * ((const char *)data)[0] is a FLASH string
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_FLASH 84
-
-/**
- * RIL_REQUEST_CDMA_BURST_DTMF
- *
- * Send DTMF string
- *
- * "data" is const char **
- * ((const char **)data)[0] is a DTMF string
- * ((const char **)data)[1] is the DTMF ON length in milliseconds, or 0 to use
- *                          default
- * ((const char **)data)[2] is the DTMF OFF length in milliseconds, or 0 to use
- *                          default
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_BURST_DTMF 85
-
-/**
- * RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY
- *
- * Takes a 26 digit string (20 digit AKEY + 6 digit checksum).
- * If the checksum is valid the 20 digit AKEY is written to NV,
- * replacing the existing AKEY no matter what it was before.
- *
- * "data" is const char *
- * ((const char *)data)[0] is a 26 digit string (ASCII digits '0'-'9')
- *                         where the last 6 digits are a checksum of the
- *                         first 20, as specified in TR45.AHAG
- *                         "Common Cryptographic Algorithms, Revision D.1
- *                         Section 2.2"
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY 86
-
-/**
- * RIL_REQUEST_CDMA_SEND_SMS
- *
- * Send a CDMA SMS message
- *
- * "data" is const RIL_CDMA_SMS_Message *
- *
- * "response" is a const RIL_SMS_Response *
- *
- * Based on the return error, caller decides to resend if sending sms
- * fails. The CDMA error class is derived as follows,
- * SUCCESS is error class 0 (no error)
- * SMS_SEND_FAIL_RETRY is error class 2 (temporary failure)
- * and GENERIC_FAILURE is error class 3 (permanent and no retry)
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SMS_SEND_FAIL_RETRY
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_SEND_SMS 87
-
-/**
- * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE
- *
- * Acknowledge the success or failure in the receipt of SMS
- * previously indicated via RIL_UNSOL_RESPONSE_CDMA_NEW_SMS
- *
- * "data" is const RIL_CDMA_SMS_Ack *
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE 88
-
-/**
- * RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG
- *
- * Request the setting of GSM/WCDMA Cell Broadcast SMS config.
- *
- * "data" is NULL
- *
- * "response" is a const RIL_GSM_BroadcastSmsConfigInfo **
- * "responselen" is count * sizeof (RIL_GSM_BroadcastSmsConfigInfo *)
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG 89
-
-/**
- * RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG
- *
- * Set GSM/WCDMA Cell Broadcast SMS config
- *
- * "data" is a const RIL_GSM_BroadcastSmsConfigInfo **
- * "datalen" is count * sizeof(RIL_GSM_BroadcastSmsConfigInfo *)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG 90
-
-/**
- * RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION
- *
-* Enable or disable the reception of GSM/WCDMA Cell Broadcast SMS
- *
- * "data" is const int *
- * (const int *)data[0] indicates to activate or turn off the
- * reception of GSM/WCDMA Cell Broadcast SMS, 0-1,
- *                       0 - Activate, 1 - Turn off
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION 91
-
-/**
- * RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG
- *
- * Request the setting of CDMA Broadcast SMS config
- *
- * "data" is NULL
- *
- * "response" is a const RIL_CDMA_BroadcastSmsConfigInfo **
- * "responselen" is count * sizeof (RIL_CDMA_BroadcastSmsConfigInfo *)
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG 92
-
-/**
- * RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG
- *
- * Set CDMA Broadcast SMS config
- *
- * "data" is an const RIL_CDMA_BroadcastSmsConfigInfo **
- * "datalen" is count * sizeof(const RIL_CDMA_BroadcastSmsConfigInfo *)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG 93
-
-/**
- * RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION
- *
- * Enable or disable the reception of CDMA Broadcast SMS
- *
- * "data" is const int *
- * (const int *)data[0] indicates to activate or turn off the
- * reception of CDMA Broadcast SMS, 0-1,
- *                       0 - Activate, 1 - Turn off
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION 94
-
-/**
- * RIL_REQUEST_CDMA_SUBSCRIPTION
- *
- * Request the device MDN / H_SID / H_NID.
- *
- * The request is only allowed when CDMA subscription is available.  When CDMA
- * subscription is changed, application layer should re-issue the request to
- * update the subscription information.
- *
- * If a NULL value is returned for any of the device id, it means that error
- * accessing the device.
- *
- * "response" is const char **
- * ((const char **)response)[0] is MDN if CDMA subscription is available
- * ((const char **)response)[1] is a comma separated list of H_SID (Home SID) if
- *                              CDMA subscription is available, in decimal format
- * ((const char **)response)[2] is a comma separated list of H_NID (Home NID) if
- *                              CDMA subscription is available, in decimal format
- * ((const char **)response)[3] is MIN (10 digits, MIN2+MIN1) if CDMA subscription is available
- * ((const char **)response)[4] is PRL version if CDMA subscription is available
- *
- * Valid errors:
- *  SUCCESS
- *  RIL_E_SUBSCRIPTION_NOT_AVAILABLE
- */
-
-#define RIL_REQUEST_CDMA_SUBSCRIPTION 95
-
-/**
- * RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM
- *
- * Stores a CDMA SMS message to RUIM memory.
- *
- * "data" is RIL_CDMA_SMS_WriteArgs *
- *
- * "response" is int *
- * ((const int *)response)[0] is the record index where the message is stored.
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM 96
-
-/**
- * RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM
- *
- * Deletes a CDMA SMS message from RUIM memory.
- *
- * "data" is int  *
- * ((int *)data)[0] is the record index of the message to delete.
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM 97
-
-/**
- * RIL_REQUEST_DEVICE_IDENTITY
- *
- * Request the device ESN / MEID / IMEI / IMEISV.
- *
- * The request is always allowed and contains GSM and CDMA device identity;
- * it substitutes the deprecated requests RIL_REQUEST_GET_IMEI and
- * RIL_REQUEST_GET_IMEISV.
- *
- * If a NULL value is returned for any of the device id, it means that error
- * accessing the device.
- *
- * When CDMA subscription is changed the ESN/MEID may change.  The application
- * layer should re-issue the request to update the device identity in this case.
- *
- * "response" is const char **
- * ((const char **)response)[0] is IMEI if GSM subscription is available
- * ((const char **)response)[1] is IMEISV if GSM subscription is available
- * ((const char **)response)[2] is ESN if CDMA subscription is available
- * ((const char **)response)[3] is MEID if CDMA subscription is available
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_DEVICE_IDENTITY 98
-
-/**
- * RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE
- *
- * Request the radio's system selection module to exit emergency
- * callback mode.  RIL will not respond with SUCCESS until the modem has
- * completely exited from Emergency Callback Mode.
- *
- * "data" is NULL
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE 99
-
-/**
- * RIL_REQUEST_GET_SMSC_ADDRESS
- *
- * Queries the default Short Message Service Center address on the device.
- *
- * "data" is NULL
- *
- * "response" is const char * containing the SMSC address.
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_GET_SMSC_ADDRESS 100
-
-/**
- * RIL_REQUEST_SET_SMSC_ADDRESS
- *
- * Sets the default Short Message Service Center address on the device.
- *
- * "data" is const char * containing the SMSC address.
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_SET_SMSC_ADDRESS 101
-
-/**
- * RIL_REQUEST_REPORT_SMS_MEMORY_STATUS
- *
- * Indicates whether there is storage available for new SMS messages.
- *
- * "data" is int *
- * ((int *)data)[0] is 1 if memory is available for storing new messages
- *                  is 0 if memory capacity is exceeded
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_REPORT_SMS_MEMORY_STATUS 102
-
-/**
- * RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING
- *
- * Indicates that the StkSerivce is running and is
- * ready to receive RIL_UNSOL_STK_XXXXX commands.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING 103
-
-/**
- * RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE
- *
- * Request to query the location where the CDMA subscription shall
- * be retrieved
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *  SUBSCRIPTION_NOT_AVAILABLE
- *
- * See also: RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE
- */
-#define RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE 104
-
-/**
- * RIL_REQUEST_ISIM_AUTHENTICATION
- *
- * Request the ISIM application on the UICC to perform AKA
- * challenge/response algorithm for IMS authentication
- *
- * "data" is a const char * containing the challenge string in Base64 format
- * "response" is a const char * containing the response in Base64 format
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_ISIM_AUTHENTICATION 105
-
-/**
- * RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU
- *
- * Acknowledge successful or failed receipt of SMS previously indicated
- * via RIL_UNSOL_RESPONSE_NEW_SMS, including acknowledgement TPDU to send
- * as the RP-User-Data element of the RP-ACK or RP-ERROR PDU.
- *
- * "data" is const char **
- * ((const char **)data)[0] is "1" on successful receipt (send RP-ACK)
- *                          is "0" on failed receipt (send RP-ERROR)
- * ((const char **)data)[1] is the acknowledgement TPDU in hexadecimal format
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU 106
-
-/**
- * RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS
- *
- * Requests to send a SAT/USAT envelope command to SIM.
- * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111.
- *
- * This request has one difference from RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND:
- * the SW1 and SW2 status bytes from the UICC response are returned along with
- * the response data, using the same structure as RIL_REQUEST_SIM_IO.
- *
- * The RIL implementation shall perform the normal processing of a '91XX'
- * response in SW1/SW2 to retrieve the pending proactive command and send it
- * as an unsolicited response, as RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND does.
- *
- * "data" is a const char * containing the SAT/USAT command
- * in hexadecimal format starting with command tag
- *
- * "response" is a const RIL_SIM_IO_Response *
- *
- * Valid errors:
- *  RIL_E_SUCCESS
- *  RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- *  RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS 107
-
-/**
- * RIL_REQUEST_VOICE_RADIO_TECH
- *
- * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only
- * when radio state is RADIO_STATE_ON
- *
- * "data" is NULL
- * "response" is int *
- * ((int *) response)[0] is of type const RIL_RadioTechnology
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_VOICE_RADIO_TECH 108
-
-/**
- * RIL_REQUEST_GET_CELL_INFO_LIST
- *
- * Request all of the current cell information known to the radio. The radio
- * must a list of all current cells, including the neighboring cells. If for a particular
- * cell information isn't known then the appropriate unknown value will be returned.
- * This does not cause or change the rate of RIL_UNSOL_CELL_INFO_LIST.
- *
- * "data" is NULL
- *
- * "response" is an array of  RIL_CellInfo.
- */
-#define RIL_REQUEST_GET_CELL_INFO_LIST 109
-
-/**
- * RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE
- *
- * Sets the minimum time between when RIL_UNSOL_CELL_INFO_LIST should be invoked.
- * A value of 0, means invoke RIL_UNSOL_CELL_INFO_LIST when any of the reported
- * information changes. Setting the value to INT_MAX(0x7fffffff) means never issue
- * a RIL_UNSOL_CELL_INFO_LIST.
- *
- * "data" is int *
- * ((int *)data)[0] is minimum time in milliseconds
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE 110
-
-/**
- * RIL_REQUEST_SET_INITIAL_ATTACH_APN
- *
- * Set an apn to initial attach network
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  SUBSCRIPTION_NOT_AVAILABLE
- */
-#define RIL_REQUEST_SET_INITIAL_ATTACH_APN 111
-
-/**
- * RIL_REQUEST_IMS_REGISTRATION_STATE
- *
- * Request current IMS registration state
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)response)[0] is registration state:
- *              0 - Not registered
- *              1 - Registered
- *
- * If ((int*)response)[0] is = 1, then ((int *) response)[1]
- * must follow with IMS SMS format:
- *
- * ((int *) response)[1] is of type RIL_RadioTechnologyFamily
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_IMS_REGISTRATION_STATE 112
-
-/**
- * RIL_REQUEST_IMS_SEND_SMS
- *
- * Send a SMS message over IMS
- *
- * "data" is const RIL_IMS_SMS_Message *
- *
- * "response" is a const RIL_SMS_Response *
- *
- * Based on the return error, caller decides to resend if sending sms
- * fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry.
- * In case of retry, data is encoded based on Voice Technology available.
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  SMS_SEND_FAIL_RETRY
- *  FDN_CHECK_FAILURE
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_IMS_SEND_SMS 113
-
-/**
- * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC
- *
- * Request APDU exchange on the basic channel. This command reflects TS 27.007
- * "generic SIM access" operation (+CSIM). The modem must ensure proper function
- * of GSM/CDMA, and filter commands appropriately. It should filter
- * channel management and SELECT by DF name commands.
- *
- * "data" is a const RIL_SIM_APDU *
- * "sessionid" field should be ignored.
- *
- * "response" is a const RIL_SIM_IO_Response *
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC 114
-
-/**
- * RIL_REQUEST_SIM_OPEN_CHANNEL
- *
- * Open a new logical channel and select the given application. This command
- * reflects TS 27.007 "open logical channel" operation (+CCHO).
- *
- * "data" is const char * and set to AID value, See ETSI 102.221 and 101.220.
- *
- * "response" is int *
- * ((int *)data)[0] contains the session id of the logical channel.
- * ((int *)data)[1] onwards may optionally contain the select response for the
- *     open channel command with one byte per integer.
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *  MISSING_RESOURCE
- *  NO_SUCH_ELEMENT
- */
-#define RIL_REQUEST_SIM_OPEN_CHANNEL 115
-
-/**
- * RIL_REQUEST_SIM_CLOSE_CHANNEL
- *
- * Close a previously opened logical channel. This command reflects TS 27.007
- * "close logical channel" operation (+CCHC).
- *
- * "data" is int *
- * ((int *)data)[0] is the session id of logical the channel to close.
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SIM_CLOSE_CHANNEL 116
-
-/**
- * RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL
- *
- * Exchange APDUs with a UICC over a previously opened logical channel. This
- * command reflects TS 27.007 "generic logical channel access" operation
- * (+CGLA). The modem should filter channel management and SELECT by DF name
- * commands.
- *
- * "data" is a const RIL_SIM_APDU*
- *
- * "response" is a const RIL_SIM_IO_Response *
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL 117
-
-/**
- * RIL_REQUEST_NV_READ_ITEM
- *
- * Read one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h.
- * This is used for device configuration by some CDMA operators.
- *
- * "data" is a const RIL_NV_ReadItem *
- *
- * "response" is const char * containing the contents of the NV item
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_NV_READ_ITEM 118
-
-/**
- * RIL_REQUEST_NV_WRITE_ITEM
- *
- * Write one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h.
- * This is used for device configuration by some CDMA operators.
- *
- * "data" is a const RIL_NV_WriteItem *
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_NV_WRITE_ITEM 119
-
-/**
- * RIL_REQUEST_NV_WRITE_CDMA_PRL
- *
- * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage.
- * This is used for device configuration by some CDMA operators.
- *
- * "data" is a const char * containing the PRL as a byte array
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_NV_WRITE_CDMA_PRL 120
-
-/**
- * RIL_REQUEST_NV_RESET_CONFIG
- *
- * Reset the radio NV configuration to the factory state.
- * This is used for device configuration by some CDMA operators.
- *
- * "data" is int *
- * ((int *)data)[0] is 1 to reload all NV items
- * ((int *)data)[0] is 2 for erase NV reset (SCRTN)
- * ((int *)data)[0] is 3 for factory reset (RTN)
- *
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_NV_RESET_CONFIG 121
-
- /** RIL_REQUEST_SET_UICC_SUBSCRIPTION
- * FIXME This API needs to have more documentation.
- *
- * Selection/de-selection of a subscription from a SIM card
- * "data" is const  RIL_SelectUiccSub*
-
- *
- * "response" is NULL
- *
- *  Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  SUBSCRIPTION_NOT_SUPPORTED
- *
- */
-#define RIL_REQUEST_SET_UICC_SUBSCRIPTION  122
-
-/**
- *  RIL_REQUEST_ALLOW_DATA
- *
- *  Tells the modem whether data calls are allowed or not
- *
- * "data" is int *
- * FIXME slotId and aid will be added.
- * ((int *)data)[0] is == 0 to allow data calls
- * ((int *)data)[0] is == 1 to disallow data calls
- *
- * "response" is NULL
- *
- *  Valid errors:
- *
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_ALLOW_DATA  123
-
-/**
- * RIL_REQUEST_GET_HARDWARE_CONFIG
- *
- * Request all of the current hardware (modem and sim) associated
- * with the RIL.
- *
- * "data" is NULL
- *
- * "response" is an array of  RIL_HardwareConfig.
- */
-#define RIL_REQUEST_GET_HARDWARE_CONFIG 124
-
-/**
- * RIL_REQUEST_SIM_AUTHENTICATION
- *
- * Returns the response of SIM Authentication through RIL to a
- * challenge request.
- *
- * "data" Base64 encoded string containing challenge:
- *      int   authContext;          P2 value of authentication command, see P2 parameter in
- *                                  3GPP TS 31.102 7.1.2
- *      char *authData;             the challenge string in Base64 format, see 3GPP
- *                                  TS 31.102 7.1.2
- *      char *aid;                  AID value, See ETSI 102.221 8.1 and 101.220 4,
- *                                  NULL if no value
- *
- * "response" Base64 encoded strings containing response:
- *      int   sw1;                  Status bytes per 3GPP TS 31.102 section 7.3
- *      int   sw2;
- *      char *simResponse;          Response in Base64 format, see 3GPP TS 31.102 7.1.2
- */
-#define RIL_REQUEST_SIM_AUTHENTICATION 125
-
-/**
- * RIL_REQUEST_GET_DC_RT_INFO
- *
- * The request is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
- * Requests the Data Connection Real Time Info
- *
- * "data" is NULL
- *
- * "response" is the most recent RIL_DcRtInfo
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- *
- * See also: RIL_UNSOL_DC_RT_INFO_CHANGED
- */
-#define RIL_REQUEST_GET_DC_RT_INFO 126
-
-/**
- * RIL_REQUEST_SET_DC_RT_INFO_RATE
- *
- * The request is DEPRECATED
- * This is the minimum number of milliseconds between successive
- * RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate
- * at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of
- * 0 means send as fast as possible.
- *
- * "data" The number of milliseconds as an int
- *
- * "response" is null
- *
- * Valid errors:
- *  SUCCESS must not fail
- */
-#define RIL_REQUEST_SET_DC_RT_INFO_RATE 127
-
-/**
- * RIL_REQUEST_SET_DATA_PROFILE
- *
- * Set data profile in modem
- * Modem should erase existed profiles from framework, and apply new profiles
- * "data" is an const RIL_DataProfileInfo **
- * "datalen" is count * sizeof(const RIL_DataProfileInfo *)
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE (radio resetting)
- *  GENERIC_FAILURE
- *  SUBSCRIPTION_NOT_AVAILABLE
- */
-#define RIL_REQUEST_SET_DATA_PROFILE 128
-
-/**
- * RIL_REQUEST_SHUTDOWN
- *
- * Device is shutting down. All further commands are ignored
- * and RADIO_NOT_AVAILABLE must be returned.
- *
- * "data" is null
- * "response" is NULL
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SHUTDOWN 129
-
-/**
- * RIL_REQUEST_GET_RADIO_CAPABILITY
- *
- * Used to get phone radio capablility.
- *
- * "data" is the RIL_RadioCapability structure
- *
- * Valid errors:
- *  SUCCESS
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_GET_RADIO_CAPABILITY 130
-
-/**
- * RIL_REQUEST_SET_RADIO_CAPABILITY
- *
- * Used to set the phones radio capability. Be VERY careful
- * using this request as it may cause some vendor modems to reset. Because
- * of the possible modem reset any RIL commands after this one may not be
- * processed.
- *
- * "data" is the RIL_RadioCapability structure
- *
- * "response" is the RIL_RadioCapability structure, used to feedback return status
- *
- * Valid errors:
- *  SUCCESS means a RIL_UNSOL_RADIO_CAPABILITY will be sent within 30 seconds.
- *  RADIO_NOT_AVAILABLE
- *  GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_RADIO_CAPABILITY 131
-
- /**
- * RIL_REQUEST_START_LCE
- *
- * Start Link Capacity Estimate (LCE) service if supported by the radio.
- *
- * "data" is const int *
- * ((const int*)data)[0] specifies the desired reporting interval (ms).
- * ((const int*)data)[1] specifies the LCE service mode. 1: PULL; 0: PUSH.
- *
- * "response" is the RIL_LceStatusInfo.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * LCE_NOT_SUPPORTED
- */
-#define RIL_REQUEST_START_LCE 132
-
-/**
- * RIL_REQUEST_STOP_LCE
- *
- * Stop Link Capacity Estimate (LCE) service, the STOP operation should be
- * idempotent for the radio modem.
- *
- * "response" is the RIL_LceStatusInfo.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * LCE_NOT_SUPPORTED
- */
-#define RIL_REQUEST_STOP_LCE 133
-
-/**
- * RIL_REQUEST_PULL_LCEDATA
- *
- * Pull LCE service for capacity information.
- *
- * "response" is the RIL_LceDataInfo.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * LCE_NOT_SUPPORTED
- */
-#define RIL_REQUEST_PULL_LCEDATA 134
- /**
- * RIL_REQUEST_GET_ACTIVITY_INFO
- *
- * Get modem activity statisitics info.
- *
- * There can be multiple RIL_REQUEST_GET_ACTIVITY_INFO calls to modem.
- * Once the response for the request is sent modem will clear
- * current statistics information.
- *
- * "data" is null
- * "response" is const RIL_ActivityStatsInfo *
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_GET_ACTIVITY_INFO 135
-
-
-/* SAMSUNG REQUESTS */
-#undef RIL_REQUEST_SIM_OPEN_CHANNEL
-#undef RIL_REQUEST_SIM_CLOSE_CHANNEL
-
-#define RIL_REQUEST_GET_CELL_BROADCAST_CONFIG 10002
-
-#define RIL_REQUEST_SEND_ENCODED_USSD 10005
-#define RIL_REQUEST_SET_PDA_MEMORY_STATUS 10006
-#define RIL_REQUEST_GET_PHONEBOOK_STORAGE_INFO 10007
-#define RIL_REQUEST_GET_PHONEBOOK_ENTRY 10008
-#define RIL_REQUEST_ACCESS_PHONEBOOK_ENTRY 10009
-#define RIL_REQUEST_DIAL_VIDEO_CALL 10010
-#define RIL_REQUEST_CALL_DEFLECTION 10011
-#define RIL_REQUEST_READ_SMS_FROM_SIM 10012
-#define RIL_REQUEST_USIM_PB_CAPA 10013
-#define RIL_REQUEST_LOCK_INFO 10014
-
-#define RIL_REQUEST_DIAL_EMERGENCY 10016
-#define RIL_REQUEST_GET_STOREAD_MSG_COUNT 10017
-#define RIL_REQUEST_STK_SIM_INIT_EVENT 10018
-#define RIL_REQUEST_GET_LINE_ID 10019
-#define RIL_REQUEST_SET_LINE_ID 10020
-#define RIL_REQUEST_GET_SERIAL_NUMBER 10021
-#define RIL_REQUEST_GET_MANUFACTURE_DATE_NUMBER 10022
-#define RIL_REQUEST_GET_BARCODE_NUMBER 10023
-#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_BOOTSTRAP 10024
-#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_NAF 10025
-#define RIL_REQUEST_SIM_TRANSMIT_BASIC 10026
-#define RIL_REQUEST_SIM_OPEN_CHANNEL 10027
-#define RIL_REQUEST_SIM_CLOSE_CHANNEL 10028
-#define RIL_REQUEST_SIM_TRANSMIT_CHANNEL 10029
-#define RIL_REQUEST_SIM_AUTH 10030
-#define RIL_REQUEST_PS_ATTACH 10031
-#define RIL_REQUEST_PS_DETACH 10032
-#define RIL_REQUEST_ACTIVATE_DATA_CALL 10033
-#define RIL_REQUEST_CHANGE_SIM_PERSO 10034
-#define RIL_REQUEST_ENTER_SIM_PERSO 10035
-#define RIL_REQUEST_GET_TIME_INFO 10036
-#define RIL_REQUEST_OMADM_SETUP_SESSION 10037
-#define RIL_REQUEST_OMADM_SERVER_START_SESSION 10038
-#define RIL_REQUEST_OMADM_CLIENT_START_SESSION 10039
-#define RIL_REQUEST_OMADM_SEND_DATA 10040
-#define RIL_REQUEST_CDMA_GET_DATAPROFILE 10041
-#define RIL_REQUEST_CDMA_SET_DATAPROFILE 10042
-#define RIL_REQUEST_CDMA_GET_SYSTEMPROPERTIES 10043
-#define RIL_REQUEST_CDMA_SET_SYSTEMPROPERTIES 10044
-#define RIL_REQUEST_SEND_SMS_COUNT 10045
-#define RIL_REQUEST_SEND_SMS_MSG 10046
-#define RIL_REQUEST_SEND_SMS_MSG_READ_STATUS 10047
-#define RIL_REQUEST_MODEM_HANGUP 10048
-#define RIL_REQUEST_SET_SIM_POWER 10049
-#define RIL_REQUEST_SET_PREFERRED_NETWORK_LIST 10050
-#define RIL_REQUEST_GET_PREFERRED_NETWORK_LIST 10051
-#define RIL_REQUEST_HANGUP_VT 10052
-
-
-/***********************************************************************/
-
-
-#define RIL_UNSOL_RESPONSE_BASE 1000
-
-/**
- * RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED
- *
- * Indicate when value of RIL_RadioState has changed.
- *
- * Callee will invoke RIL_RadioStateRequest method on main thread
- *
- * "data" is NULL
- */
-
-#define RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED 1000
-
-
-/**
- * RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED
- *
- * Indicate when call state has changed
- *
- * Callee will invoke RIL_REQUEST_GET_CURRENT_CALLS on main thread
- *
- * "data" is NULL
- *
- * Response should be invoked on, for example,
- * "RING", "BUSY", "NO CARRIER", and also call state
- * transitions (DIALING->ALERTING ALERTING->ACTIVE)
- *
- * Redundent or extraneous invocations are tolerated
- */
-#define RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED 1001
-
-
-/**
- * RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED
- *
- * Called when the voice network state changed
- *
- * Callee will invoke the following requests on main thread:
- *
- * RIL_REQUEST_VOICE_REGISTRATION_STATE
- * RIL_REQUEST_OPERATOR
- *
- * "data" is NULL
- *
- * FIXME should this happen when SIM records are loaded? (eg, for
- * EONS)
- */
-#define RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED 1002
-
-/**
- * RIL_UNSOL_RESPONSE_NEW_SMS
- *
- * Called when new SMS is received.
- *
- * "data" is const char *
- * This is a pointer to a string containing the PDU of an SMS-DELIVER
- * as an ascii string of hex digits. The PDU starts with the SMSC address
- * per TS 27.005 (+CMT:)
- *
- * Callee will subsequently confirm the receipt of thei SMS with a
- * RIL_REQUEST_SMS_ACKNOWLEDGE
- *
- * No new RIL_UNSOL_RESPONSE_NEW_SMS
- * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a
- * RIL_REQUEST_SMS_ACKNOWLEDGE has been received
- */
-
-#define RIL_UNSOL_RESPONSE_NEW_SMS 1003
-
-/**
- * RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT
- *
- * Called when new SMS Status Report is received.
- *
- * "data" is const char *
- * This is a pointer to a string containing the PDU of an SMS-STATUS-REPORT
- * as an ascii string of hex digits. The PDU starts with the SMSC address
- * per TS 27.005 (+CDS:).
- *
- * Callee will subsequently confirm the receipt of the SMS with a
- * RIL_REQUEST_SMS_ACKNOWLEDGE
- *
- * No new RIL_UNSOL_RESPONSE_NEW_SMS
- * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a
- * RIL_REQUEST_SMS_ACKNOWLEDGE has been received
- */
-
-#define RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT 1004
-
-/**
- * RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM
- *
- * Called when new SMS has been stored on SIM card
- *
- * "data" is const int *
- * ((const int *)data)[0] contains the slot index on the SIM that contains
- * the new message
- */
-
-#define RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM 1005
-
-/**
- * RIL_UNSOL_ON_USSD
- *
- * Called when a new USSD message is received.
- *
- * "data" is const char **
- * ((const char **)data)[0] points to a type code, which is
- *  one of these string values:
- *      "0"   USSD-Notify -- text in ((const char **)data)[1]
- *      "1"   USSD-Request -- text in ((const char **)data)[1]
- *      "2"   Session terminated by network
- *      "3"   other local client (eg, SIM Toolkit) has responded
- *      "4"   Operation not supported
- *      "5"   Network timeout
- *
- * The USSD session is assumed to persist if the type code is "1", otherwise
- * the current session (if any) is assumed to have terminated.
- *
- * ((const char **)data)[1] points to a message string if applicable, which
- * should always be in UTF-8.
- */
-#define RIL_UNSOL_ON_USSD 1006
-/* Previously #define RIL_UNSOL_ON_USSD_NOTIFY 1006   */
-
-/**
- * RIL_UNSOL_ON_USSD_REQUEST
- *
- * Obsolete. Send via RIL_UNSOL_ON_USSD
- */
-#define RIL_UNSOL_ON_USSD_REQUEST 1007
-
-/**
- * RIL_UNSOL_NITZ_TIME_RECEIVED
- *
- * Called when radio has received a NITZ time message
- *
- * "data" is const char * pointing to NITZ time string
- * in the form "yy/mm/dd,hh:mm:ss(+/-)tz,dt"
- */
-#define RIL_UNSOL_NITZ_TIME_RECEIVED  1008
-
-/**
- * RIL_UNSOL_SIGNAL_STRENGTH
- *
- * Radio may report signal strength rather han have it polled.
- *
- * "data" is a const RIL_SignalStrength *
- */
-#define RIL_UNSOL_SIGNAL_STRENGTH  1009
-
-
-/**
- * RIL_UNSOL_DATA_CALL_LIST_CHANGED
- *
- * "data" is an array of RIL_Data_Call_Response_v6 identical to that
- * returned by RIL_REQUEST_DATA_CALL_LIST. It is the complete list
- * of current data contexts including new contexts that have been
- * activated. A data call is only removed from this list when the
- * framework sends a RIL_REQUEST_DEACTIVATE_DATA_CALL or the radio
- * is powered off/on.
- *
- * See also: RIL_REQUEST_DATA_CALL_LIST
- */
-
-#define RIL_UNSOL_DATA_CALL_LIST_CHANGED 1010
-
-/**
- * RIL_UNSOL_SUPP_SVC_NOTIFICATION
- *
- * Reports supplementary service related notification from the network.
- *
- * "data" is a const RIL_SuppSvcNotification *
- *
- */
-
-#define RIL_UNSOL_SUPP_SVC_NOTIFICATION 1011
-
-/**
- * RIL_UNSOL_STK_SESSION_END
- *
- * Indicate when STK session is terminated by SIM.
- *
- * "data" is NULL
- */
-#define RIL_UNSOL_STK_SESSION_END 1012
-
-/**
- * RIL_UNSOL_STK_PROACTIVE_COMMAND
- *
- * Indicate when SIM issue a STK proactive command to applications
- *
- * "data" is a const char * containing SAT/USAT proactive command
- * in hexadecimal format string starting with command tag
- *
- */
-#define RIL_UNSOL_STK_PROACTIVE_COMMAND 1013
-
-/**
- * RIL_UNSOL_STK_EVENT_NOTIFY
- *
- * Indicate when SIM notifies applcations some event happens.
- * Generally, application does not need to have any feedback to
- * SIM but shall be able to indicate appropriate messages to users.
- *
- * "data" is a const char * containing SAT/USAT commands or responses
- * sent by ME to SIM or commands handled by ME, in hexadecimal format string
- * starting with first byte of response data or command tag
- *
- */
-#define RIL_UNSOL_STK_EVENT_NOTIFY 1014
-
-/**
- * RIL_UNSOL_STK_CALL_SETUP
- *
- * Indicate when SIM wants application to setup a voice call.
- *
- * "data" is const int *
- * ((const int *)data)[0] contains timeout value (in milliseconds)
- */
-#define RIL_UNSOL_STK_CALL_SETUP 1015
-
-/**
- * RIL_UNSOL_SIM_SMS_STORAGE_FULL
- *
- * Indicates that SMS storage on the SIM is full.  Sent when the network
- * attempts to deliver a new SMS message.  Messages cannot be saved on the
- * SIM until space is freed.  In particular, incoming Class 2 messages
- * cannot be stored.
- *
- * "data" is null
- *
- */
-#define RIL_UNSOL_SIM_SMS_STORAGE_FULL 1016
-
-/**
- * RIL_UNSOL_SIM_REFRESH
- *
- * Indicates that file(s) on the SIM have been updated, or the SIM
- * has been reinitialized.
- *
- * In the case where RIL is version 6 or older:
- * "data" is an int *
- * ((int *)data)[0] is a RIL_SimRefreshResult.
- * ((int *)data)[1] is the EFID of the updated file if the result is
- * SIM_FILE_UPDATE or NULL for any other result.
- *
- * In the case where RIL is version 7:
- * "data" is a RIL_SimRefreshResponse_v7 *
- *
- * Note: If the SIM state changes as a result of the SIM refresh (eg,
- * SIM_READY -> SIM_LOCKED_OR_ABSENT), RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED
- * should be sent.
- */
-#define RIL_UNSOL_SIM_REFRESH 1017
-
-/**
- * RIL_UNSOL_CALL_RING
- *
- * Ring indication for an incoming call (eg, RING or CRING event).
- * There must be at least one RIL_UNSOL_CALL_RING at the beginning
- * of a call and sending multiple is optional. If the system property
- * ro.telephony.call_ring.multiple is false then the upper layers
- * will generate the multiple events internally. Otherwise the vendor
- * ril must generate multiple RIL_UNSOL_CALL_RING if
- * ro.telephony.call_ring.multiple is true or if it is absent.
- *
- * The rate of these events is controlled by ro.telephony.call_ring.delay
- * and has a default value of 3000 (3 seconds) if absent.
- *
- * "data" is null for GSM
- * "data" is const RIL_CDMA_SignalInfoRecord * if CDMA
- */
-#define RIL_UNSOL_CALL_RING 1018
-
-/**
- * RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED
- *
- * Indicates that SIM state changes.
- *
- * Callee will invoke RIL_REQUEST_GET_SIM_STATUS on main thread
-
- * "data" is null
- */
-#define RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED 1019
-
-/**
- * RIL_UNSOL_RESPONSE_CDMA_NEW_SMS
- *
- * Called when new CDMA SMS is received
- *
- * "data" is const RIL_CDMA_SMS_Message *
- *
- * Callee will subsequently confirm the receipt of the SMS with
- * a RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE
- *
- * No new RIL_UNSOL_RESPONSE_CDMA_NEW_SMS should be sent until
- * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE has been received
- *
- */
-#define RIL_UNSOL_RESPONSE_CDMA_NEW_SMS 1020
-
-/**
- * RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS
- *
- * Called when new Broadcast SMS is received
- *
- * "data" can be one of the following:
- * If received from GSM network, "data" is const char of 88 bytes
- * which indicates each page of a CBS Message sent to the MS by the
- * BTS as coded in 3GPP 23.041 Section 9.4.1.2.
- * If received from UMTS network, "data" is const char of 90 up to 1252
- * bytes which contain between 1 and 15 CBS Message pages sent as one
- * packet to the MS by the BTS as coded in 3GPP 23.041 Section 9.4.2.2.
- *
- */
-#define RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS 1021
-
-/**
- * RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL
- *
- * Indicates that SMS storage on the RUIM is full.  Messages
- * cannot be saved on the RUIM until space is freed.
- *
- * "data" is null
- *
- */
-#define RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL 1022
-
-/**
- * RIL_UNSOL_RESTRICTED_STATE_CHANGED
- *
- * Indicates a restricted state change (eg, for Domain Specific Access Control).
- *
- * Radio need send this msg after radio off/on cycle no matter it is changed or not.
- *
- * "data" is an int *
- * ((int *)data)[0] contains a bitmask of RIL_RESTRICTED_STATE_* values.
- */
-#define RIL_UNSOL_RESTRICTED_STATE_CHANGED 1023
-
-/**
- * RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE
- *
- * Indicates that the radio system selection module has
- * autonomously entered emergency callback mode.
- *
- * "data" is null
- *
- */
-#define RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE 1024
-
-/**
- * RIL_UNSOL_CDMA_CALL_WAITING
- *
- * Called when CDMA radio receives a call waiting indication.
- *
- * "data" is const RIL_CDMA_CallWaiting *
- *
- */
-#define RIL_UNSOL_CDMA_CALL_WAITING 1025
-
-/**
- * RIL_UNSOL_CDMA_OTA_PROVISION_STATUS
- *
- * Called when CDMA radio receives an update of the progress of an
- * OTASP/OTAPA call.
- *
- * "data" is const int *
- *  For CDMA this is an integer OTASP/OTAPA status listed in
- *  RIL_CDMA_OTA_ProvisionStatus.
- *
- */
-#define RIL_UNSOL_CDMA_OTA_PROVISION_STATUS 1026
-
-/**
- * RIL_UNSOL_CDMA_INFO_REC
- *
- * Called when CDMA radio receives one or more info recs.
- *
- * "data" is const RIL_CDMA_InformationRecords *
- *
- */
-#define RIL_UNSOL_CDMA_INFO_REC 1027
-
-/**
- * RIL_UNSOL_OEM_HOOK_RAW
- *
- * This is for OEM specific use.
- *
- * "data" is a byte[]
- */
-#define RIL_UNSOL_OEM_HOOK_RAW 1028
-
-/**
- * RIL_UNSOL_RINGBACK_TONE
- *
- * Indicates that nework doesn't have in-band information,  need to
- * play out-band tone.
- *
- * "data" is an int *
- * ((int *)data)[0] == 0 for stop play ringback tone.
- * ((int *)data)[0] == 1 for start play ringback tone.
- */
-#define RIL_UNSOL_RINGBACK_TONE 1029
-
-/**
- * RIL_UNSOL_RESEND_INCALL_MUTE
- *
- * Indicates that framework/application need reset the uplink mute state.
- *
- * There may be situations where the mute state becomes out of sync
- * between the application and device in some GSM infrastructures.
- *
- * "data" is null
- */
-#define RIL_UNSOL_RESEND_INCALL_MUTE 1030
-
-/**
- * RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED
- *
- * Called when CDMA subscription source changed.
- *
- * "data" is int *
- * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
- */
-#define RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED 1031
-
-/**
- * RIL_UNSOL_CDMA_PRL_CHANGED
- *
- * Called when PRL (preferred roaming list) changes.
- *
- * "data" is int *
- * ((int *)data)[0] is PRL_VERSION as would be returned by RIL_REQUEST_CDMA_SUBSCRIPTION
- */
-#define RIL_UNSOL_CDMA_PRL_CHANGED 1032
-
-/**
- * RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE
- *
- * Called when Emergency Callback Mode Ends
- *
- * Indicates that the radio system selection module has
- * proactively exited emergency callback mode.
- *
- * "data" is NULL
- *
- */
-#define RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE 1033
-
-/**
- * RIL_UNSOL_RIL_CONNECTED
- *
- * Called the ril connects and returns the version
- *
- * "data" is int *
- * ((int *)data)[0] is RIL_VERSION
- */
-#define RIL_UNSOL_RIL_CONNECTED 1034
-
-/**
- * RIL_UNSOL_VOICE_RADIO_TECH_CHANGED
- *
- * Indicates that voice technology has changed. Contains new radio technology
- * as a data in the message.
- *
- * "data" is int *
- * ((int *)data)[0] is of type const RIL_RadioTechnology
- *
- */
-#define RIL_UNSOL_VOICE_RADIO_TECH_CHANGED 1035
-
-/**
- * RIL_UNSOL_CELL_INFO_LIST
- *
- * Same information as returned by RIL_REQUEST_GET_CELL_INFO_LIST, but returned
- * at the rate no greater than specified by RIL_REQUEST_SET_UNSOL_CELL_INFO_RATE.
- *
- * "data" is NULL
- *
- * "response" is an array of RIL_CellInfo.
- */
-#define RIL_UNSOL_CELL_INFO_LIST 1036
-
-/**
- * RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED
- *
- * Called when IMS registration state has changed
- *
- * To get IMS registration state and IMS SMS format, callee needs to invoke the
- * following request on main thread:
- *
- * RIL_REQUEST_IMS_REGISTRATION_STATE
- *
- * "data" is NULL
- *
- */
-#define RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 1037
-
-/**
- * RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED
- *
- * Indicated when there is a change in subscription status.
- * This event will be sent in the following scenarios
- *  - subscription readiness at modem, which was selected by telephony layer
- *  - when subscription is deactivated by modem due to UICC card removal
- *  - When network invalidates the subscription i.e. attach reject due to authentication reject
- *
- * "data" is const int *
- * ((const int *)data)[0] == 0 for Subscription Deactivated
- * ((const int *)data)[0] == 1 for Subscription Activated
- *
- */
-#define RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 1038
-
-/**
- * RIL_UNSOL_SRVCC_STATE_NOTIFY
- *
- * Called when Single Radio Voice Call Continuity(SRVCC)
- * progress state has changed
- *
- * "data" is int *
- * ((int *)data)[0] is of type const RIL_SrvccState
- *
- */
-
-#define RIL_UNSOL_SRVCC_STATE_NOTIFY 1039
-
-/**
- * RIL_UNSOL_HARDWARE_CONFIG_CHANGED
- *
- * Called when the hardware configuration associated with the RILd changes
- *
- * "data" is an array of RIL_HardwareConfig
- *
- */
-#define RIL_UNSOL_HARDWARE_CONFIG_CHANGED 1040
-
-/**
- * RIL_UNSOL_DC_RT_INFO_CHANGED
- *
- * The message is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
- * Sent when the DC_RT_STATE changes but the time
- * between these messages must not be less than the
- * value set by RIL_REQUEST_SET_DC_RT_RATE.
- *
- * "data" is the most recent RIL_DcRtInfo
- *
- */
-#define RIL_UNSOL_DC_RT_INFO_CHANGED 1041
-
-/**
- * RIL_UNSOL_RADIO_CAPABILITY
- *
- * Sent when RIL_REQUEST_SET_RADIO_CAPABILITY completes.
- * Returns the phone radio capability exactly as
- * RIL_REQUEST_GET_RADIO_CAPABILITY and should be the
- * same set as sent by RIL_REQUEST_SET_RADIO_CAPABILITY.
- *
- * "data" is the RIL_RadioCapability structure
- */
-#define RIL_UNSOL_RADIO_CAPABILITY 1042
-
-/*
- * RIL_UNSOL_ON_SS
- *
- * Called when SS response is received when DIAL/USSD/SS is changed to SS by
- * call control.
- *
- * "data" is const RIL_StkCcUnsolSsResponse *
- *
- */
-#define RIL_UNSOL_ON_SS 1043
-
-/**
- * RIL_UNSOL_STK_CC_ALPHA_NOTIFY
- *
- * Called when there is an ALPHA from UICC during Call Control.
- *
- * "data" is const char * containing ALPHA string from UICC in UTF-8 format.
- *
- */
-#define RIL_UNSOL_STK_CC_ALPHA_NOTIFY 1044
-
- /**
- * RIL_UNSOL_LCEDATA_RECV
- *
- * Called when there is an incoming Link Capacity Estimate (LCE) info report.
- *
- * "data" is the RIL_LceDataInfo structure.
- *
- */
-#define RIL_UNSOL_LCEDATA_RECV 1045
-
-/* SAMSUNG RESPONSE */
-#define SAMSUNG_UNSOL_RESPONSE_BASE 11000
-
-#define RIL_UNSOL_RELEASE_COMPLETE_MESSAGE 11001
-#define RIL_UNSOL_STK_SEND_SMS_RESULT 11002
-#define RIL_UNSOL_STK_CALL_CONTROL_RESULT 11003
-#define RIL_UNSOL_DUN_CALL_STATUS 11004
-
-#define RIL_UNSOL_O2_HOME_ZONE_INFO 11007
-#define RIL_UNSOL_DEVICE_READY_NOTI 11008
-#define RIL_UNSOL_GPS_NOTI 11009
-#define RIL_UNSOL_AM 11010
-#define RIL_UNSOL_DUN_PIN_CONTROL_SIGNAL 11011
-#define RIL_UNSOL_DATA_SUSPEND_RESUME 11012
-#define RIL_UNSOL_SAP 11013
-
-#define RIL_UNSOL_SIM_SMS_STORAGE_AVAILALE 11015
-#define RIL_UNSOL_HSDPA_STATE_CHANGED 11016
-#define RIL_UNSOL_WB_AMR_STATE 11017
-#define RIL_UNSOL_TWO_MIC_STATE 11018
-#define RIL_UNSOL_DHA_STATE 11019
-#define RIL_UNSOL_UART 11020
-#define RIL_UNSOL_RESPONSE_HANDOVER 11021
-#define RIL_UNSOL_IPV6_ADDR 11022
-#define RIL_UNSOL_NWK_INIT_DISC_REQUEST 11023
-#define RIL_UNSOL_RTS_INDICATION 11024
-#define RIL_UNSOL_OMADM_SEND_DATA 11025
-#define RIL_UNSOL_DUN 11026
-#define RIL_UNSOL_SYSTEM_REBOOT 11027
-#define RIL_UNSOL_VOICE_PRIVACY_CHANGED 11028
-#define RIL_UNSOL_UTS_GETSMSCOUNT 11029
-#define RIL_UNSOL_UTS_GETSMSMSG 11030
-#define RIL_UNSOL_UTS_GET_UNREAD_SMS_STATUS 11031
-#define RIL_UNSOL_MIP_CONNECT_STATUS 11032
-
-/***********************************************************************/
-
-
-#if defined(ANDROID_MULTI_SIM)
-/**
- * RIL_Request Function pointer
- *
- * @param request is one of RIL_REQUEST_*
- * @param data is pointer to data defined for that RIL_REQUEST_*
- *        data is owned by caller, and should not be modified or freed by callee
- * @param t should be used in subsequent call to RIL_onResponse
- * @param datalen the length of data
- *
- */
-typedef void (*RIL_RequestFunc) (int request, void *data,
-                                    size_t datalen, RIL_Token t, RIL_SOCKET_ID socket_id);
-
-/**
- * This function should return the current radio state synchronously
- */
-typedef RIL_RadioState (*RIL_RadioStateRequest)(RIL_SOCKET_ID socket_id);
-
-#else
-/* Backward compatible */
-
-/**
- * RIL_Request Function pointer
- *
- * @param request is one of RIL_REQUEST_*
- * @param data is pointer to data defined for that RIL_REQUEST_*
- *        data is owned by caller, and should not be modified or freed by callee
- * @param t should be used in subsequent call to RIL_onResponse
- * @param datalen the length of data
- *
- */
-typedef void (*RIL_RequestFunc) (int request, void *data,
-                                    size_t datalen, RIL_Token t);
-
-/**
- * This function should return the current radio state synchronously
- */
-typedef RIL_RadioState (*RIL_RadioStateRequest)();
-
-#endif
-
-
-/**
- * This function returns "1" if the specified RIL_REQUEST code is
- * supported and 0 if it is not
- *
- * @param requestCode is one of RIL_REQUEST codes
- */
-
-typedef int (*RIL_Supports)(int requestCode);
-
-/**
- * This function is called from a separate thread--not the
- * thread that calls RIL_RequestFunc--and indicates that a pending
- * request should be cancelled.
- *
- * On cancel, the callee should do its best to abandon the request and
- * call RIL_onRequestComplete with RIL_Errno CANCELLED at some later point.
- *
- * Subsequent calls to  RIL_onRequestComplete for this request with
- * other results will be tolerated but ignored. (That is, it is valid
- * to ignore the cancellation request)
- *
- * RIL_Cancel calls should return immediately, and not wait for cancellation
- *
- * Please see ITU v.250 5.6.1 for how one might implement this on a TS 27.007
- * interface
- *
- * @param t token wants to be canceled
- */
-
-typedef void (*RIL_Cancel)(RIL_Token t);
-
-typedef void (*RIL_TimedCallback) (void *param);
-
-/**
- * Return a version string for your RIL implementation
- */
-typedef const char * (*RIL_GetVersion) (void);
-
-typedef struct {
-    int version;        /* set to RIL_VERSION */
-    RIL_RequestFunc onRequest;
-    RIL_RadioStateRequest onStateRequest;
-    RIL_Supports supports;
-    RIL_Cancel onCancel;
-    RIL_GetVersion getVersion;
-} RIL_RadioFunctions;
-
-typedef struct {
-    char *apn;
-    char *protocol;
-    int authtype;
-    char *username;
-    char *password;
-} RIL_InitialAttachApn;
-
-typedef struct {
-    int authContext;            /* P2 value of authentication command, see P2 parameter in
-                                   3GPP TS 31.102 7.1.2 */
-    char *authData;             /* the challenge string in Base64 format, see 3GPP
-                                   TS 31.102 7.1.2 */
-    char *aid;                  /* AID value, See ETSI 102.221 8.1 and 101.220 4,
-                                   NULL if no value. */
-} RIL_SimAuthentication;
-
-#ifdef RIL_SHLIB
-struct RIL_Env {
-    /**
-     * "t" is parameter passed in on previous call to RIL_Notification
-     * routine.
-     *
-     * If "e" != SUCCESS, then response can be null/is ignored
-     *
-     * "response" is owned by caller, and should not be modified or
-     * freed by callee
-     *
-     * RIL_onRequestComplete will return as soon as possible
-     */
-    void (*OnRequestComplete)(RIL_Token t, RIL_Errno e,
-                           void *response, size_t responselen);
-
-#if defined(ANDROID_MULTI_SIM)
-    /**
-     * "unsolResponse" is one of RIL_UNSOL_RESPONSE_*
-     * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_*
-     *
-     * "data" is owned by caller, and should not be modified or freed by callee
-     */
-    void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen, RIL_SOCKET_ID socket_id);
-#else
-    /**
-     * "unsolResponse" is one of RIL_UNSOL_RESPONSE_*
-     * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_*
-     *
-     * "data" is owned by caller, and should not be modified or freed by callee
-     */
-    void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen);
-#endif
-    /**
-     * Call user-specifed "callback" function on on the same thread that
-     * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies
-     * a relative time value at which the callback is invoked. If relativeTime is
-     * NULL or points to a 0-filled structure, the callback will be invoked as
-     * soon as possible
-     */
-
-    void (*RequestTimedCallback) (RIL_TimedCallback callback,
-                                   void *param, const struct timeval *relativeTime);
-};
-
-
-/**
- *  RIL implementations must defined RIL_Init
- *  argc and argv will be command line arguments intended for the RIL implementation
- *  Return NULL on error
- *
- * @param env is environment point defined as RIL_Env
- * @param argc number of arguments
- * @param argv list fo arguments
- *
- */
-const RIL_RadioFunctions *RIL_Init(const struct RIL_Env *env, int argc, char **argv);
-
-#else /* RIL_SHLIB */
-
-/**
- * Call this once at startup to register notification routine
- *
- * @param callbacks user-specifed callback function
- */
-void RIL_register (const RIL_RadioFunctions *callbacks);
-
-
-/**
- *
- * RIL_onRequestComplete will return as soon as possible
- *
- * @param t is parameter passed in on previous call to RIL_Notification
- *          routine.
- * @param e error code
- *          if "e" != SUCCESS, then response can be null/is ignored
- * @param response is owned by caller, and should not be modified or
- *                 freed by callee
- * @param responselen the length of response in byte
- */
-void RIL_onRequestComplete(RIL_Token t, RIL_Errno e,
-                           void *response, size_t responselen);
-
-#if defined(ANDROID_MULTI_SIM)
-/**
- * @param unsolResponse is one of RIL_UNSOL_RESPONSE_*
- * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_*
- *     "data" is owned by caller, and should not be modified or freed by callee
- * @param datalen the length of data in byte
- */
-
-void RIL_onUnsolicitedResponse(int unsolResponse, const void *data,
-                                size_t datalen, RIL_SOCKET_ID socket_id);
-#else
-/**
- * @param unsolResponse is one of RIL_UNSOL_RESPONSE_*
- * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_*
- *     "data" is owned by caller, and should not be modified or freed by callee
- * @param datalen the length of data in byte
- */
-
-void RIL_onUnsolicitedResponse(int unsolResponse, const void *data,
-                                size_t datalen);
-#endif
-
-/**
- * Call user-specifed "callback" function on on the same thread that
- * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies
- * a relative time value at which the callback is invoked. If relativeTime is
- * NULL or points to a 0-filled structure, the callback will be invoked as
- * soon as possible
- *
- * @param callback user-specifed callback function
- * @param param parameter list
- * @param relativeTime a relative time value at which the callback is invoked
- */
-
-void RIL_requestTimedCallback (RIL_TimedCallback callback,
-                               void *param, const struct timeval *relativeTime);
-
-
-#endif /* RIL_SHLIB */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*ANDROID_RIL_H*/
diff --git a/selinux/device.te b/selinux/device.te
new file mode 100644
index 0000000..c95050b
--- /dev/null
+++ b/selinux/device.te
@@ -0,0 +1,4 @@
+type mali_device, dev_type, mlstrustedobject;
+type rfkill_device, dev_type;
+type diagnostic_device, dev_type;
+type efs_block_device, dev_type;
diff --git a/selinux/dhcp.te b/selinux/dhcp.te
new file mode 100755
index 0000000..c403b9b
--- /dev/null
+++ b/selinux/dhcp.te
@@ -0,0 +1 @@
+allow dhcp self:rawip_socket { create write setopt };
diff --git a/selinux/domain.te b/selinux/domain.te
new file mode 100644
index 0000000..1be0633
--- /dev/null
+++ b/selinux/domain.te
@@ -0,0 +1,4 @@
+## /dev/mali, /dev/ump
+allow domain mali_device:chr_file rw_file_perms;
+
+
diff --git a/selinux/file.te b/selinux/file.te
new file mode 100644
index 0000000..185b1c2
--- /dev/null
+++ b/selinux/file.te
@@ -0,0 +1,9 @@
+type radio_efs_file, fs_type;
+
+type firmware_mfc, file_type;
+type firmware_camera, file_type;
+
+type qmuxd_socket, file_type;
+type kickstart_data_file, file_type, data_file_type;
+type sensors_data_file, file_type, data_file_type;
+type volume_data_file, file_type, data_file_type;
diff --git a/selinux/file_contexts b/selinux/file_contexts
new file mode 100644
index 0000000..36dc14c
--- /dev/null
+++ b/selinux/file_contexts
@@ -0,0 +1,70 @@
+# GFX
+/dev/mali                               u:object_r:mali_device:s0
+/dev/ump                                u:object_r:mali_device:s0
+/dev/fimg2d                             u:object_r:mali_device:s0
+
+# RIL
+/dev/mdm                                u:object_r:radio_device:s0
+/dev/hsicctl[0-3]*                      u:object_r:radio_device:s0
+/dev/ttyUSB0                            u:object_r:radio_device:s0
+/dev/diag                               u:object_r:diagnostic_device:s0
+
+# GPS
+/dev/ttySAC1                            u:object_r:gps_device:s0
+
+# Bluetooth
+/dev/ttySAC0                            u:object_r:hci_attach_dev:s0
+/efs/bluetooth(/.*)?                    u:object_r:bluetooth_data_file:s0
+
+# Sensors
+/dev/akm8975                            u:object_r:sensors_device:s0
+/efs/gyro_cal_data                      u:object_r:sensors_data_file:s0
+
+# Camera
+/data/ISP_CV                            u:object_r:camera_data_file:s0
+/dev/exynos-mem                         u:object_r:video_device:s0
+
+# for wpa_supp
+/dev/rfkill                             u:object_r:rfkill_device:s0
+
+# Firmwares
+/system/vendor/firmware(/.*)?           u:object_r:firmware_camera:s0
+/system/vendor/firmware/mfc_fw.bin      u:object_r:firmware_mfc:s0
+/system/vendor/firmware/fimc_is_fw.bin  u:object_r:firmware_camera:s0
+/data/cfw(/.*)?                         u:object_r:firmware_camera:s0
+/tombstones                             u:object_r:system_data_file:s0
+/tombstones(/.*)?                       u:object_r:tombstone_data_file:s0
+/tombstones/qcks(/.*)?                  u:object_r:kickstart_data_file:s0
+
+# Vibrator
+/dev/tspdrv                             u:object_r:input_device:s0
+
+# Wifi
+/efs/wifi/.mac.info                     u:object_r:wifi_data_file:s0
+
+# Sec-ril
+/efs/FactoryApp/keystr                  u:object_r:efs_file:s0
+/efs/FactoryApp/factorymode             u:object_r:efs_file:s0
+/efs/FactoryApp/serial_no               u:object_r:efs_file:s0
+/data/misc/radio/ramdumpmode.txt        u:object_r:radio_data_file:s0
+/data/misc/radio/dlnk                   u:object_r:radio_data_file:s0
+
+# Binaries
+/system/bin/qmuxd                u:object_r:qmux_exec:s0
+/system/bin/efsks                u:object_r:kickstart_exec:s0
+/system/bin/ks                   u:object_r:kickstart_exec:s0
+/system/bin/qcks                 u:object_r:kickstart_exec:s0
+
+# Sockets
+/dev/socket/qmux_audio(/.*)?     u:object_r:qmuxd_socket:s0
+/dev/socket/qmux_bluetooth(/.*)? u:object_r:qmuxd_socket:s0
+/dev/socket/qmux_gps(/.*)?       u:object_r:qmuxd_socket:s0
+/dev/socket/qmux_radio(/.*)?     u:object_r:qmuxd_socket:s0
+
+# Block devices
+/dev/block/mmcblk0p[3-6]*       u:object_r:efs_block_device:s0
+/dev/block/mmcblk0p10           u:object_r:efs_block_device:s0
+/dev/block/mmcblk0p11           u:object_r:efs_block_device:s0
+
+# Audio related
+/data/local/audio(/.*)?         u:object_r:volume_data_file:s0
diff --git a/selinux/init.te b/selinux/init.te
new file mode 100644
index 0000000..2f29889
--- /dev/null
+++ b/selinux/init.te
@@ -0,0 +1,3 @@
+allow init wpa_socket:unix_dgram_socket { bind create };
+
+
diff --git a/selinux/kickstart.te b/selinux/kickstart.te
new file mode 100755
index 0000000..14e1ad5
--- /dev/null
+++ b/selinux/kickstart.te
@@ -0,0 +1,44 @@
+# kickstart processes and scripts
+type kickstart, domain;
+type kickstart_exec, exec_type, file_type;
+
+# kickstart_checker.sh talks to init over the property socket
+unix_socket_connect(kickstart, property, init)
+
+# Start /system/bin/qcks from init
+init_daemon_domain(kickstart)
+
+# Spawn /system/bin/efsks and /system/bin/ks
+allow kickstart kickstart_exec:file { open execute_no_trans getattr };
+
+# Run dd on m9kefs[123] block devices; write to /data/qcks/
+# Run cat on firmware and m9kefs[123] data; write to /data/qcks/
+allow kickstart efs_block_device:blk_file rw_file_perms;
+allow kickstart kickstart_data_file:file create_file_perms;
+allow kickstart kickstart_data_file:dir rw_dir_perms;
+allow kickstart radio_efs_file:file r_file_perms;
+allow kickstart radio_efs_file:dir search;
+
+# Let qcks access /dev/mdm node (modem driver)
+allow kickstart radio_device:chr_file rw_file_perms;
+
+# Allow /dev/ttyUSB0 access
+allow kickstart radio_device:chr_file { write ioctl getattr };
+
+# Allow to run toolbox commands
+allow kickstart shell_exec:file rx_file_perms;
+# Toolbox commands for firmware dd
+allow kickstart system_file:file execute_no_trans;
+
+# Access to /dev/block/platform/msm_sdcc.1/by-name/m9kefs2
+allow kickstart block_device:dir { getattr write search };
+
+# Set system property key
+allow kickstart radio_prop:property_service set;
+
+allow kickstart shell_exec:file entrypoint;
+# ls on /data/qcks/
+allow kickstart self:capability { dac_override setuid };
+
+# XXX Label sysfs files with a specific type?
+allow kickstart sysfs:file rw_file_perms;
\ No newline at end of file
diff --git a/selinux/mediaserver.te b/selinux/mediaserver.te
new file mode 100644
index 0000000..35dce7b
--- /dev/null
+++ b/selinux/mediaserver.te
@@ -0,0 +1,8 @@
+qmux_socket(mediaserver)
+allow mediaserver self:socket create_socket_perms;
+allow mediaserver { firmware_camera }:file r_file_perms;
+allow mediaserver firmware_camera:dir r_dir_perms;
+allow mediaserver camera_data_file:file rw_file_perms;
+
+# Bluetooth audio
+allow mediaserver bluetooth:unix_stream_socket { connectto };
diff --git a/selinux/netmgrd.te b/selinux/netmgrd.te
new file mode 100755
index 0000000..11159a4
--- /dev/null
+++ b/selinux/netmgrd.te
@@ -0,0 +1,29 @@
+# Network utilities (radio process)
+type netmgrd, domain;
+type netmgrd_exec, exec_type, file_type;
+
+# Started by init
+init_daemon_domain(netmgrd)
+
+allow netmgrd self:udp_socket { create ioctl };
+# fsetid, dac_override unlink on /dev/socket/qmux_radio/qmux_client_socket
+allow netmgrd self:capability { sys_module fsetid setuid setgid net_admin net_raw dac_override };
+allow netmgrd self:packet_socket { write bind read create };
+allow netmgrd self:netlink_socket { write read create bind setopt };
+allow netmgrd self:netlink_route_socket { create bind read write nlmsg_read nlmsg_write setopt getattr };
+allow netmgrd kernel:system module_request;
+
+# Talk to qmuxd
+qmux_socket(netmgrd)
+
+# Allow logging diagnostic items
+allow netmgrd diagnostic_device:chr_file rw_file_perms;
+
+# /data/data_test/ access with shell
+allow netmgrd shell_exec:file { execute read open execute_no_trans };
+allow netmgrd system_file:file { execute_no_trans };
+
+# Talk to init over the property socket
+unix_socket_connect(netmgrd, property, init)
+# Set net.rmnet_usb0. values
+allow netmgrd radio_prop:property_service set;
diff --git a/selinux/qmux.te b/selinux/qmux.te
new file mode 100755
index 0000000..e2a5bbf
--- /dev/null
+++ b/selinux/qmux.te
@@ -0,0 +1,21 @@
+# Qualcomm Management Interface Multiplexer
+type qmux, domain;
+type qmux_exec, exec_type, file_type;
+
+# Started by init
+init_daemon_domain(qmux)
+
+# Create local qmux_connect_socket
+allow qmux qmuxd_socket:dir w_dir_perms;
+allow qmux qmuxd_socket:sock_file { create setattr getattr unlink };
+
+# /dev/hsicctl* node access
+allow qmux radio_device:chr_file rw_file_perms;
+
+# Allow logging diagnostic items
+allow qmux diagnostic_device:chr_file rw_file_perms;
+
+allow qmux self:capability { dac_override setuid };
+
+# XXX Should we label with own type
+allow qmux sysfs:file { open write append read getattr };
diff --git a/selinux/rild.te b/selinux/rild.te
new file mode 100755
index 0000000..04209b0
--- /dev/null
+++ b/selinux/rild.te
@@ -0,0 +1,14 @@
+## RIL
+allow rild radio_device:chr_file rw_file_perms;
+allow rild { efs_file }:file rw_file_perms;
+allow rild self:netlink_socket { create bind read write };
+allow rild self:netlink_route_socket { write };
+
+# Talk to qmuxd
+qmux_socket(rild)
+
+# Allow logging diagnostic items
+allow rild diagnostic_device:chr_file rw_file_perms;
+
+# XXX label with own type?
+allow rild sysfs:file { read open write getattr };
diff --git a/selinux/secril.te b/selinux/secril.te
new file mode 100644
index 0000000..7761d80
--- /dev/null
+++ b/selinux/secril.te
@@ -0,0 +1,25 @@
+# sec-ril
+type secril-daemon, domain;
+type secril-daemon_exec, exec_type, file_type;
+
+# Start /system/bin/sec-ril from init
+init_daemon_domain(secril-daemon)
+
+allow secril-daemon secril-daemon_exec:file { open execute_no_trans getattr };
+allow secril-daemon self:udp_socket { create ioctl };
+unix_socket_connect(secril-daemon, property, init)
+unix_socket_connect(secril-daemon, rild, rild)
+
+allow secril-daemon { efs_file }:file rw_file_perms;
+allow secril-daemon system_data_file:dir create_dir_perms;
+allow secril-daemon system_data_file:file unlink;
+allow secril-daemon radio_data_file:file { create_file_perms };
+allow secril-daemon kernel:system module_request;
+allow secril-daemon self:capability { sys_module fsetid setuid setgid net_admin net_raw dac_override };
+allow secril-daemon system_file:file x_file_perms;
+allow secril-daemon sysfs:file rw_file_perms;
+allow secril-daemon shell_exec:file rx_file_perms;
+allow secril-daemon app_data_file:file rw_file_perms;
+allow secril-daemon app_data_file:dir search;
+allow secril-daemon zygote_exec:file rx_file_perms;
+allow secril-daemon ashmem_device:chr_file x_file_perms;
\ No newline at end of file
diff --git a/selinux/system.te b/selinux/system.te
new file mode 100755
index 0000000..bc8212b
--- /dev/null
+++ b/selinux/system.te
@@ -0,0 +1,12 @@
+# Talk to qmuxd
+qmux_socket(system)
+
+allow system diagnostic_device:chr_file rw_file_perms;
+allow system sensors_device:chr_file { read open };
+allow system sensors_data_file:file r_file_perms;
+allow system wpa_socket:unix_dgram_socket sendto;
+allow system_app volume_data_file:file { read write open getattr };
+
+allow system sysfs:file { read open write };
+allow system self:capability { sys_module };
+
diff --git a/selinux/te_macros b/selinux/te_macros
new file mode 100755
index 0000000..274fd55
--- /dev/null
+++ b/selinux/te_macros
@@ -0,0 +1,12 @@
+#####################################
+# qmux_socket(clientdomain)
+# Allow client to send via a local
+# socket to the qmux domain.
+define(`qmux_socket', `
+type $1_qmuxd_socket, file_type;
+file_type_auto_trans($1, qmuxd_socket, $1_qmuxd_socket)
+unix_socket_connect($1, qmuxd, qmux)
+allow qmux $1_qmuxd_socket:sock_file { getattr unlink };
+')
+
+
diff --git a/selinux/ueventd.te b/selinux/ueventd.te
new file mode 100644
index 0000000..fd1852b
--- /dev/null
+++ b/selinux/ueventd.te
@@ -0,0 +1,11 @@
+# Drivers read firmware files /firmware/image
+allow ueventd { radio_efs_file }:file r_file_perms;
+allow ueventd { radio_efs_file }:dir search;
+
+# MFC firmware
+allow ueventd { firmware_mfc }:file r_file_perms;
+
+# Camera related firmwares
+allow ueventd { firmware_camera }:dir search;
+allow ueventd { firmware_camera }:file r_file_perms;
+
diff --git a/selinux/wpa_supplicant.te b/selinux/wpa_supplicant.te
new file mode 100755
index 0000000..ab5fb24
--- /dev/null
+++ b/selinux/wpa_supplicant.te
@@ -0,0 +1,10 @@
+allow wpa init:unix_dgram_socket { read write };
+
+# logwrapper used with wpa_supplicant
+allow wpa devpts:chr_file { read write };
+
+allow wpa wpa_socket:unix_dgram_socket { read write };
+allow wpa_socket system:unix_dgram_socket sendto;
+
+allow wpa_socket wifi_data_file:sock_file unlink;
+allow wpa rfkill_device:chr_file rw_file_perms;
\ No newline at end of file