summaryrefslogtreecommitdiffstats
path: root/configs/gps.conf
diff options
context:
space:
mode:
Diffstat (limited to 'configs/gps.conf')
-rw-r--r--configs/gps.conf102
1 files changed, 102 insertions, 0 deletions
diff --git a/configs/gps.conf b/configs/gps.conf
new file mode 100644
index 0000000..6576285
--- /dev/null
+++ b/configs/gps.conf
@@ -0,0 +1,102 @@
+#Test
+NTP_SERVER=time.gpsonextra.net
+#Asia
+# NTP_SERVER=asia.pool.ntp.org
+#Europe
+# NTP_SERVER=europe.pool.ntp.org
+#North America
+# NTP_SERVER=north-america.pool.ntp.org
+
+XTRA_SERVER_1=http://xtra1.gpsonextra.net/xtra2.bin
+XTRA_SERVER_2=http://xtra2.gpsonextra.net/xtra2.bin
+XTRA_SERVER_3=http://xtra3.gpsonextra.net/xtra2.bin
+
+# DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
+# 4 - Debug, 5 - Verbose
+DEBUG_LEVEL = 4
+
+# Intermediate position report, 1=enable, 0=disable
+INTERMEDIATE_POS=0
+
+# supl version 1.0
+SUPL_VER=0x10000
+
+# Error Estimate
+# _SET = 1
+# _CLEAR = 0
+ERR_ESTIMATE=0
+
+# GPS Capabilities bit mask
+# SCHEDULING = 1
+# MSB = 2
+# MSA = 4
+# ULP = 0x20
+# ON_DEMAND_TIME = 0x10 // yunu.lee
+# default = MSA | MSB | SCHEDULING | ULP
+CAPABILITIES=0x16
+
+# Accuracy threshold for intermediate positions
+# less accurate positions are ignored, 0 for passing all positions
+# ACCURACY_THRES=5000
+
+################################
+##### AGPS server settings #####
+################################
+
+# FOR SUPL SUPPORT, set the following
+# SUPL_HOST=supl.host.com or IP
+# SUPL_PORT=1234
+
+# FOR C2K PDE SUPPORT, set the following
+# C2K_HOST=c2k.pde.com or IP
+# C2K_PORT=1234
+
+################################
+# Sensor Settings
+################################
+
+# Needs to be set explicitly based on sensor
+# There is no default value.
+GYRO_BIAS_RANDOM_WALK=0.00001
+
+# Sensor Sampling Rate Parameters for Low-Data Rate Filter (should be greater than 0)
+SENSOR_ACCEL_BATCHES_PER_SEC=3
+SENSOR_ACCEL_SAMPLES_PER_BATCH=5
+SENSOR_GYRO_BATCHES_PER_SEC=3
+SENSOR_GYRO_SAMPLES_PER_BATCH=5
+# Sensor Sampling Rate Parameters for High-Data Rate Filter (should be greater than 0)
+SENSOR_ACCEL_BATCHES_PER_SEC_HIGH=4
+SENSOR_ACCEL_SAMPLES_PER_BATCH_HIGH=25
+SENSOR_GYRO_BATCHES_PER_SEC_HIGH=4
+SENSOR_GYRO_SAMPLES_PER_BATCH_HIGH=25
+
+# INS Filter Mode (0=Enable, 1=Disable)
+SENSOR_ALGORITHM_CONFIG_MASK=1
+
+# Sensor Control Mode (0=AUTO, 1=FORCE_ON)
+SENSOR_CONTROL_MODE=0
+
+# Enable or Disable Sensors for GPS use (0=Enable, 1=Disable)
+SENSOR_USAGE=0
+
+# Choose GSIFF sensor provider (1=DSPS, 2=Android NDK)
+SENSOR_PROVIDER=2
+
+################################
+# Indoor Positioning Settings
+################################
+# 0: QUIPC disabled, 1: QUIPC enabled, 2: forced QUIPC only
+QUIPC_ENABLED = 0
+
+################################
+# EXTRA SETTINGS
+################################
+# Enable or Disable Wiper (1=Enable, 0=Disable)
+ENABLE_WIPER=0
+
+####################################
+# LTE Positioning Profile Settings
+####################################
+# 0: Enable RRLP on LTE(Default) 1: Enable LPP_User_Plane on LTE
+LPP_PROFILE = 0
+