summaryrefslogtreecommitdiffstats
path: root/include/telephony/ril.h
diff options
context:
space:
mode:
Diffstat (limited to 'include/telephony/ril.h')
-rw-r--r--include/telephony/ril.h5394
1 files changed, 0 insertions, 5394 deletions
diff --git a/include/telephony/ril.h b/include/telephony/ril.h
deleted file mode 100644
index e13ad9f..0000000
--- a/include/telephony/ril.h
+++ /dev/null
@@ -1,5394 +0,0 @@
-/*
- * Copyright (C) 2006 The Android Open Source Project
- *
- * Licensed under the Apache License, Version 2.0 (the "License");
- * you may not use this file except in compliance with the License.
- * You may obtain a copy of the License at
- *
- * http://www.apache.org/licenses/LICENSE-2.0
- *
- * Unless required by applicable law or agreed to in writing, software
- * distributed under the License is distributed on an "AS IS" BASIS,
- * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
- * See the License for the specific language governing permissions and
- * limitations under the License.
- */
-
-#ifndef ANDROID_RIL_H
-#define ANDROID_RIL_H 1
-
-#include <stdlib.h>
-#include <stdint.h>
-#include <telephony/ril_cdma_sms.h>
-#include <telephony/ril_nv_items.h>
-#include <telephony/ril_msim.h>
-
-#ifndef FEATURE_UNIT_TEST
-#include <sys/time.h>
-#endif /* !FEATURE_UNIT_TEST */
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-
-#if defined(ANDROID_SIM_COUNT_2)
-#define SIM_COUNT 2
-#elif defined(ANDROID_SIM_COUNT_3)
-#define SIM_COUNT 3
-#elif defined(ANDROID_SIM_COUNT_4)
-#define SIM_COUNT 4
-#else
-#define SIM_COUNT 1
-#endif
-
-#ifndef ANDROID_MULTI_SIM
-#define SIM_COUNT 1
-#endif
-
-#define RIL_VERSION 11 /* Current version */
-#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */
-
-#define CDMA_ALPHA_INFO_BUFFER_LENGTH 64
-#define CDMA_NUMBER_INFO_BUFFER_LENGTH 81
-
-#define MAX_RILDS 3
-#define MAX_SOCKET_NAME_LENGTH 6
-#define MAX_CLIENT_ID_LENGTH 2
-#define MAX_DEBUG_SOCKET_NAME_LENGTH 12
-#define MAX_QEMU_PIPE_NAME_LENGTH 11
-#define MAX_UUID_LENGTH 64
-
-
-typedef void * RIL_Token;
-
-typedef enum {
- RIL_SOCKET_1,
-#if (SIM_COUNT >= 2)
- RIL_SOCKET_2,
-#if (SIM_COUNT >= 3)
- RIL_SOCKET_3,
-#endif
-#if (SIM_COUNT >= 4)
- RIL_SOCKET_4,
-#endif
-#endif
- RIL_SOCKET_NUM
-} RIL_SOCKET_ID;
-
-
-typedef enum {
- RIL_E_SUCCESS = 0,
- RIL_E_RADIO_NOT_AVAILABLE = 1, /* If radio did not start or is resetting */
- RIL_E_GENERIC_FAILURE = 2,
- RIL_E_PASSWORD_INCORRECT = 3, /* for PIN/PIN2 methods only! */
- RIL_E_SIM_PIN2 = 4, /* Operation requires SIM PIN2 to be entered */
- RIL_E_SIM_PUK2 = 5, /* Operation requires SIM PIN2 to be entered */
- RIL_E_REQUEST_NOT_SUPPORTED = 6,
- RIL_E_CANCELLED = 7,
- RIL_E_OP_NOT_ALLOWED_DURING_VOICE_CALL = 8, /* data ops are not allowed during voice
- call on a Class C GPRS device */
- RIL_E_OP_NOT_ALLOWED_BEFORE_REG_TO_NW = 9, /* data ops are not allowed before device
- registers in network */
- RIL_E_SMS_SEND_FAIL_RETRY = 10, /* fail to send sms and need retry */
- RIL_E_SIM_ABSENT = 11, /* fail to set the location where CDMA subscription
- shall be retrieved because of SIM or RUIM
- card absent */
- RIL_E_SUBSCRIPTION_NOT_AVAILABLE = 12, /* fail to find CDMA subscription from specified
- location */
- RIL_E_MODE_NOT_SUPPORTED = 13, /* HW does not support preferred network type */
- RIL_E_FDN_CHECK_FAILURE = 14, /* command failed because recipient is not on FDN list */
- RIL_E_ILLEGAL_SIM_OR_ME = 15, /* network selection failed due to
- illegal SIM or ME */
- RIL_E_MISSING_RESOURCE = 16, /* no logical channel available */
- RIL_E_NO_SUCH_ELEMENT = 17, /* application not found on SIM */
- RIL_E_DIAL_MODIFIED_TO_USSD = 18, /* DIAL request modified to USSD */
- RIL_E_DIAL_MODIFIED_TO_SS = 19, /* DIAL request modified to SS */
- RIL_E_DIAL_MODIFIED_TO_DIAL = 20, /* DIAL request modified to DIAL with different
- data */
- RIL_E_USSD_MODIFIED_TO_DIAL = 21, /* USSD request modified to DIAL */
- RIL_E_USSD_MODIFIED_TO_SS = 22, /* USSD request modified to SS */
- RIL_E_USSD_MODIFIED_TO_USSD = 23, /* USSD request modified to different USSD
- request */
- RIL_E_SS_MODIFIED_TO_DIAL = 24, /* SS request modified to DIAL */
- RIL_E_SS_MODIFIED_TO_USSD = 25, /* SS request modified to USSD */
- RIL_E_SUBSCRIPTION_NOT_SUPPORTED = 26, /* Subscription not supported by RIL */
- RIL_E_SS_MODIFIED_TO_SS = 27 /* SS request modified to different SS request */
-
-
-} RIL_Errno;
-
-typedef enum {
- RIL_CALL_ACTIVE = 0,
- RIL_CALL_HOLDING = 1,
- RIL_CALL_DIALING = 2, /* MO call only */
- RIL_CALL_ALERTING = 3, /* MO call only */
- RIL_CALL_INCOMING = 4, /* MT call only */
- RIL_CALL_WAITING = 5 /* MT call only */
-} RIL_CallState;
-
-typedef enum {
- RADIO_STATE_OFF = 0, /* Radio explictly powered off (eg CFUN=0) */
- RADIO_STATE_UNAVAILABLE = 1, /* Radio unavailable (eg, resetting or not booted) */
- /* States 2-9 below are deprecated. Just leaving them here for backward compatibility. */
- RADIO_STATE_SIM_NOT_READY = 2, /* Radio is on, but the SIM interface is not ready */
- RADIO_STATE_SIM_LOCKED_OR_ABSENT = 3, /* SIM PIN locked, PUK required, network
- personalization locked, or SIM absent */
- RADIO_STATE_SIM_READY = 4, /* Radio is on and SIM interface is available */
- RADIO_STATE_RUIM_NOT_READY = 5, /* Radio is on, but the RUIM interface is not ready */
- RADIO_STATE_RUIM_READY = 6, /* Radio is on and the RUIM interface is available */
- RADIO_STATE_RUIM_LOCKED_OR_ABSENT = 7, /* RUIM PIN locked, PUK required, network
- personalization locked, or RUIM absent */
- RADIO_STATE_NV_NOT_READY = 8, /* Radio is on, but the NV interface is not available */
- RADIO_STATE_NV_READY = 9, /* Radio is on and the NV interface is available */
- RADIO_STATE_ON = 10 /* Radio is on */
-} RIL_RadioState;
-
-typedef enum {
- RADIO_TECH_UNKNOWN = 0,
- RADIO_TECH_GPRS = 1,
- RADIO_TECH_EDGE = 2,
- RADIO_TECH_UMTS = 3,
- RADIO_TECH_IS95A = 4,
- RADIO_TECH_IS95B = 5,
- RADIO_TECH_1xRTT = 6,
- RADIO_TECH_EVDO_0 = 7,
- RADIO_TECH_EVDO_A = 8,
- RADIO_TECH_HSDPA = 9,
- RADIO_TECH_HSUPA = 10,
- RADIO_TECH_HSPA = 11,
- RADIO_TECH_EVDO_B = 12,
- RADIO_TECH_EHRPD = 13,
- RADIO_TECH_LTE = 14,
- RADIO_TECH_HSPAP = 15, // HSPA+
- RADIO_TECH_GSM = 16, // Only supports voice
- RADIO_TECH_TD_SCDMA = 17,
- RADIO_TECH_IWLAN = 18
-} RIL_RadioTechnology;
-
-typedef enum {
- RAF_UNKNOWN = (1 << RADIO_TECH_UNKNOWN),
- RAF_GPRS = (1 << RADIO_TECH_GPRS),
- RAF_EDGE = (1 << RADIO_TECH_EDGE),
- RAF_UMTS = (1 << RADIO_TECH_UMTS),
- RAF_IS95A = (1 << RADIO_TECH_IS95A),
- RAF_IS95B = (1 << RADIO_TECH_IS95B),
- RAF_1xRTT = (1 << RADIO_TECH_1xRTT),
- RAF_EVDO_0 = (1 << RADIO_TECH_EVDO_0),
- RAF_EVDO_A = (1 << RADIO_TECH_EVDO_A),
- RAF_HSDPA = (1 << RADIO_TECH_HSDPA),
- RAF_HSUPA = (1 << RADIO_TECH_HSUPA),
- RAF_HSPA = (1 << RADIO_TECH_HSPA),
- RAF_EVDO_B = (1 << RADIO_TECH_EVDO_B),
- RAF_EHRPD = (1 << RADIO_TECH_EHRPD),
- RAF_LTE = (1 << RADIO_TECH_LTE),
- RAF_HSPAP = (1 << RADIO_TECH_HSPAP),
- RAF_GSM = (1 << RADIO_TECH_GSM),
- RAF_TD_SCDMA = (1 << RADIO_TECH_TD_SCDMA),
-} RIL_RadioAccessFamily;
-
-typedef enum {
- RC_PHASE_CONFIGURED = 0, // LM is configured is initial value and value after FINISH completes
- RC_PHASE_START = 1, // START is sent before Apply and indicates that an APPLY will be
- // forthcoming with these same parameters
- RC_PHASE_APPLY = 2, // APPLY is sent after all LM's receive START and returned
- // RIL_RadioCapability.status = 0, if any START's fail no
- // APPLY will be sent
- RC_PHASE_UNSOL_RSP = 3, // UNSOL_RSP is sent with RIL_UNSOL_RADIO_CAPABILITY
- RC_PHASE_FINISH = 4 // FINISH is sent after all commands have completed. If an error
- // occurs in any previous command the RIL_RadioAccessesFamily and
- // logicalModemUuid fields will be the prior configuration thus
- // restoring the configuration to the previous value. An error
- // returned by this command will generally be ignored or may
- // cause that logical modem to be removed from service.
-} RadioCapabilityPhase;
-
-typedef enum {
- RC_STATUS_NONE = 0, // This parameter has no meaning with RC_PHASE_START,
- // RC_PHASE_APPLY
- RC_STATUS_SUCCESS = 1, // Tell modem the action transaction of set radio
- // capability was success with RC_PHASE_FINISH
- RC_STATUS_FAIL = 2, // Tell modem the action transaction of set radio
- // capability is fail with RC_PHASE_FINISH.
-} RadioCapabilityStatus;
-
-#define RIL_RADIO_CAPABILITY_VERSION 1
-typedef struct {
- int version; // Version of structure, RIL_RADIO_CAPABILITY_VERSION
- int session; // Unique session value defined by framework returned in all "responses/unsol"
- int phase; // CONFIGURED, START, APPLY, FINISH
- int rat; // RIL_RadioAccessFamily for the radio
- char logicalModemUuid[MAX_UUID_LENGTH]; // A UUID typically "com.xxxx.lmX where X is the logical modem.
- int status; // Return status and an input parameter for RC_PHASE_FINISH
-} RIL_RadioCapability;
-
-// Do we want to split Data from Voice and the use
-// RIL_RadioTechnology for get/setPreferredVoice/Data ?
-typedef enum {
- PREF_NET_TYPE_GSM_WCDMA = 0, /* GSM/WCDMA (WCDMA preferred) */
- PREF_NET_TYPE_GSM_ONLY = 1, /* GSM only */
- PREF_NET_TYPE_WCDMA = 2, /* WCDMA */
- PREF_NET_TYPE_GSM_WCDMA_AUTO = 3, /* GSM/WCDMA (auto mode, according to PRL) */
- PREF_NET_TYPE_CDMA_EVDO_AUTO = 4, /* CDMA and EvDo (auto mode, according to PRL) */
- PREF_NET_TYPE_CDMA_ONLY = 5, /* CDMA only */
- PREF_NET_TYPE_EVDO_ONLY = 6, /* EvDo only */
- PREF_NET_TYPE_GSM_WCDMA_CDMA_EVDO_AUTO = 7, /* GSM/WCDMA, CDMA, and EvDo (auto mode, according to PRL) */
- PREF_NET_TYPE_LTE_CDMA_EVDO = 8, /* LTE, CDMA and EvDo */
- PREF_NET_TYPE_LTE_GSM_WCDMA = 9, /* LTE, GSM/WCDMA */
- PREF_NET_TYPE_LTE_CMDA_EVDO_GSM_WCDMA = 10, /* LTE, CDMA, EvDo, GSM/WCDMA */
- PREF_NET_TYPE_LTE_ONLY = 11, /* LTE only */
- PREF_NET_TYPE_LTE_WCDMA = 12 /* LTE/WCDMA */
-} RIL_PreferredNetworkType;
-
-/* Source for cdma subscription */
-typedef enum {
- CDMA_SUBSCRIPTION_SOURCE_RUIM_SIM = 0,
- CDMA_SUBSCRIPTION_SOURCE_NV = 1
-} RIL_CdmaSubscriptionSource;
-
-/* User-to-User signaling Info activation types derived from 3GPP 23.087 v8.0 */
-typedef enum {
- RIL_UUS_TYPE1_IMPLICIT = 0,
- RIL_UUS_TYPE1_REQUIRED = 1,
- RIL_UUS_TYPE1_NOT_REQUIRED = 2,
- RIL_UUS_TYPE2_REQUIRED = 3,
- RIL_UUS_TYPE2_NOT_REQUIRED = 4,
- RIL_UUS_TYPE3_REQUIRED = 5,
- RIL_UUS_TYPE3_NOT_REQUIRED = 6
-} RIL_UUS_Type;
-
-/* User-to-User Signaling Information data coding schemes. Possible values for
- * Octet 3 (Protocol Discriminator field) in the UUIE. The values have been
- * specified in section 10.5.4.25 of 3GPP TS 24.008 */
-typedef enum {
- RIL_UUS_DCS_USP = 0, /* User specified protocol */
- RIL_UUS_DCS_OSIHLP = 1, /* OSI higher layer protocol */
- RIL_UUS_DCS_X244 = 2, /* X.244 */
- RIL_UUS_DCS_RMCF = 3, /* Reserved for system mangement
- convergence function */
- RIL_UUS_DCS_IA5c = 4 /* IA5 characters */
-} RIL_UUS_DCS;
-
-/* User-to-User Signaling Information defined in 3GPP 23.087 v8.0
- * This data is passed in RIL_ExtensionRecord and rec contains this
- * structure when type is RIL_UUS_INFO_EXT_REC */
-typedef struct {
- RIL_UUS_Type uusType; /* UUS Type */
- RIL_UUS_DCS uusDcs; /* UUS Data Coding Scheme */
- int uusLength; /* Length of UUS Data */
- char * uusData; /* UUS Data */
-} RIL_UUS_Info;
-
-/* CDMA Signal Information Record as defined in C.S0005 section 3.7.5.5 */
-typedef struct {
- char isPresent; /* non-zero if signal information record is present */
- char signalType; /* as defined 3.7.5.5-1 */
- char alertPitch; /* as defined 3.7.5.5-2 */
- char signal; /* as defined 3.7.5.5-3, 3.7.5.5-4 or 3.7.5.5-5 */
-} RIL_CDMA_SignalInfoRecord;
-
-typedef struct {
- RIL_CallState state;
- int index; /* Connection Index for use with, eg, AT+CHLD */
- int toa; /* type of address, eg 145 = intl */
- char isMpty; /* nonzero if is mpty call */
- char isMT; /* nonzero if call is mobile terminated */
- char als; /* ALS line indicator if available
- (0 = line 1) */
- char isVoice; /* nonzero if this is is a voice call */
- char isVoicePrivacy; /* nonzero if CDMA voice privacy mode is active */
- char * number; /* Remote party number */
- int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */
- char * name; /* Remote party name */
- int namePresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown 3=Payphone */
- RIL_UUS_Info * uusInfo; /* NULL or Pointer to User-User Signaling Information */
-} RIL_Call;
-
-/* Deprecated, use RIL_Data_Call_Response_v6 */
-typedef struct {
- int cid; /* Context ID, uniquely identifies this call */
- int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
- char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1.
- For example, "IP", "IPV6", "IPV4V6", or "PPP". */
- char * apn; /* ignored */
- char * address; /* An address, e.g., "192.0.1.3" or "2001:db8::1". */
-} RIL_Data_Call_Response_v4;
-
-/*
- * Returned by RIL_REQUEST_SETUP_DATA_CALL, RIL_REQUEST_DATA_CALL_LIST
- * and RIL_UNSOL_DATA_CALL_LIST_CHANGED, on error status != 0.
- */
-typedef struct {
- int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
- int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
- back-off timer value RIL wants to override the one
- pre-configured in FW.
- The unit is miliseconds.
- The value < 0 means no value is suggested.
- The value 0 means retry should be done ASAP.
- The value of INT_MAX(0x7fffffff) means no retry. */
- int cid; /* Context ID, uniquely identifies this call */
- int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
- char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1.
- For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
- PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
- such as "IP" or "IPV6" */
- char * ifname; /* The network interface name */
- char * addresses; /* A space-delimited list of addresses with optional "/" prefix length,
- e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
- May not be empty, typically 1 IPv4 or 1 IPv6 or
- one of each. If the prefix length is absent the addresses
- are assumed to be point to point with IPv4 having a prefix
- length of 32 and IPv6 128. */
- char * dnses; /* A space-delimited list of DNS server addresses,
- e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
- May be empty. */
- char * gateways; /* A space-delimited list of default gateway addresses,
- e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
- May be empty in which case the addresses represent point
- to point connections. */
-} RIL_Data_Call_Response_v6;
-
-typedef struct {
- int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
- int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
- back-off timer value RIL wants to override the one
- pre-configured in FW.
- The unit is miliseconds.
- The value < 0 means no value is suggested.
- The value 0 means retry should be done ASAP.
- The value of INT_MAX(0x7fffffff) means no retry. */
- int cid; /* Context ID, uniquely identifies this call */
- int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
- char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1.
- For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
- PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
- such as "IP" or "IPV6" */
- char * ifname; /* The network interface name */
- char * addresses; /* A space-delimited list of addresses with optional "/" prefix length,
- e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
- May not be empty, typically 1 IPv4 or 1 IPv6 or
- one of each. If the prefix length is absent the addresses
- are assumed to be point to point with IPv4 having a prefix
- length of 32 and IPv6 128. */
- char * dnses; /* A space-delimited list of DNS server addresses,
- e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
- May be empty. */
- char * gateways; /* A space-delimited list of default gateway addresses,
- e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
- May be empty in which case the addresses represent point
- to point connections. */
- char * pcscf; /* the Proxy Call State Control Function address
- via PCO(Protocol Configuration Option) for IMS client. */
-} RIL_Data_Call_Response_v9;
-
-typedef struct {
- int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */
- int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry
- back-off timer value RIL wants to override the one
- pre-configured in FW.
- The unit is miliseconds.
- The value < 0 means no value is suggested.
- The value 0 means retry should be done ASAP.
- The value of INT_MAX(0x7fffffff) means no retry. */
- int cid; /* Context ID, uniquely identifies this call */
- int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */
- char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1.
- For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is
- PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported
- such as "IP" or "IPV6" */
- char * ifname; /* The network interface name */
- char * addresses; /* A space-delimited list of addresses with optional "/" prefix length,
- e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64".
- May not be empty, typically 1 IPv4 or 1 IPv6 or
- one of each. If the prefix length is absent the addresses
- are assumed to be point to point with IPv4 having a prefix
- length of 32 and IPv6 128. */
- char * dnses; /* A space-delimited list of DNS server addresses,
- e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
- May be empty. */
- char * gateways; /* A space-delimited list of default gateway addresses,
- e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1".
- May be empty in which case the addresses represent point
- to point connections. */
- char * pcscf; /* the Proxy Call State Control Function address
- via PCO(Protocol Configuration Option) for IMS client. */
- int mtu; /* MTU received from network
- Value <= 0 means network has either not sent a value or
- sent an invalid value */
-} RIL_Data_Call_Response_v11;
-
-typedef enum {
- RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */
- RADIO_TECH_3GPP2 = 2 /* 3GPP2 Technologies - CDMA */
-} RIL_RadioTechnologyFamily;
-
-typedef struct {
- RIL_RadioTechnologyFamily tech;
- unsigned char retry; /* 0 == not retry, nonzero == retry */
- int messageRef; /* Valid field if retry is set to nonzero.
- Contains messageRef from RIL_SMS_Response
- corresponding to failed MO SMS.
- */
-
- union {
- /* Valid field if tech is RADIO_TECH_3GPP2. See RIL_REQUEST_CDMA_SEND_SMS */
- RIL_CDMA_SMS_Message* cdmaMessage;
-
- /* Valid field if tech is RADIO_TECH_3GPP. See RIL_REQUEST_SEND_SMS */
- char** gsmMessage;
- } message;
-} RIL_IMS_SMS_Message;
-
-typedef struct {
- int messageRef; /* TP-Message-Reference for GSM,
- and BearerData MessageId for CDMA
- (See 3GPP2 C.S0015-B, v2.0, table 4.5-1). */
- char *ackPDU; /* or NULL if n/a */
- int errorCode; /* See 3GPP 27.005, 3.2.5 for GSM/UMTS,
- 3GPP2 N.S0005 (IS-41C) Table 171 for CDMA,
- -1 if unknown or not applicable*/
-} RIL_SMS_Response;
-
-/** Used by RIL_REQUEST_WRITE_SMS_TO_SIM */
-typedef struct {
- int status; /* Status of message. See TS 27.005 3.1, "<stat>": */
- /* 0 = "REC UNREAD" */
- /* 1 = "REC READ" */
- /* 2 = "STO UNSENT" */
- /* 3 = "STO SENT" */
- char * pdu; /* PDU of message to write, as an ASCII hex string less the SMSC address,
- the TP-layer length is "strlen(pdu)/2". */
- char * smsc; /* SMSC address in GSM BCD format prefixed by a length byte
- (as expected by TS 27.005) or NULL for default SMSC */
-} RIL_SMS_WriteArgs;
-
-/** Used by RIL_REQUEST_DIAL */
-typedef struct {
- char * address;
- int clir;
- /* (same as 'n' paremeter in TS 27.007 7.7 "+CLIR"
- * clir == 0 on "use subscription default value"
- * clir == 1 on "CLIR invocation" (restrict CLI presentation)
- * clir == 2 on "CLIR suppression" (allow CLI presentation)
- */
- RIL_UUS_Info * uusInfo; /* NULL or Pointer to User-User Signaling Information */
-} RIL_Dial;
-
-typedef struct {
- int command; /* one of the commands listed for TS 27.007 +CRSM*/
- int fileid; /* EF id */
- char *path; /* "pathid" from TS 27.007 +CRSM command.
- Path is in hex asciii format eg "7f205f70"
- Path must always be provided.
- */
- int p1;
- int p2;
- int p3;
- char *data; /* May be NULL*/
- char *pin2; /* May be NULL*/
-} RIL_SIM_IO_v5;
-
-typedef struct {
- int command; /* one of the commands listed for TS 27.007 +CRSM*/
- int fileid; /* EF id */
- char *path; /* "pathid" from TS 27.007 +CRSM command.
- Path is in hex asciii format eg "7f205f70"
- Path must always be provided.
- */
- int p1;
- int p2;
- int p3;
- char *data; /* May be NULL*/
- char *pin2; /* May be NULL*/
- char *aidPtr; /* AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. */
-} RIL_SIM_IO_v6;
-
-/* Used by RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL and
- * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC. */
-typedef struct {
- int sessionid; /* "sessionid" from TS 27.007 +CGLA command. Should be
- ignored for +CSIM command. */
-
- /* Following fields are used to derive the APDU ("command" and "length"
- values in TS 27.007 +CSIM and +CGLA commands). */
- int cla;
- int instruction;
- int p1;
- int p2;
- int p3; /* A negative P3 implies a 4 byte APDU. */
- char *data; /* May be NULL. In hex string format. */
-} RIL_SIM_APDU;
-
-typedef struct {
- int sw1;
- int sw2;
- char *simResponse; /* In hex string format ([a-fA-F0-9]*), except for SIM_AUTHENTICATION
- response for which it is in Base64 format, see 3GPP TS 31.102 7.1.2 */
-} RIL_SIM_IO_Response;
-
-/* See also com.android.internal.telephony.gsm.CallForwardInfo */
-
-typedef struct {
- int status; /*
- * For RIL_REQUEST_QUERY_CALL_FORWARD_STATUS
- * status 1 = active, 0 = not active
- *
- * For RIL_REQUEST_SET_CALL_FORWARD:
- * status is:
- * 0 = disable
- * 1 = enable
- * 2 = interrogate
- * 3 = registeration
- * 4 = erasure
- */
-
- int reason; /* from TS 27.007 7.11 "reason" */
- int serviceClass;/* From 27.007 +CCFC/+CLCK "class"
- See table for Android mapping from
- MMI service code
- 0 means user doesn't input class */
- int toa; /* "type" from TS 27.007 7.11 */
- char * number; /* "number" from TS 27.007 7.11. May be NULL */
- int timeSeconds; /* for CF no reply only */
-}RIL_CallForwardInfo;
-
-typedef struct {
- char * cid; /* Combination of LAC and Cell Id in 32 bits in GSM.
- * Upper 16 bits is LAC and lower 16 bits
- * is CID (as described in TS 27.005)
- * Primary Scrambling Code (as described in TS 25.331)
- * in 9 bits in UMTS
- * Valid values are hexadecimal 0x0000 - 0xffffffff.
- */
- int rssi; /* Received RSSI in GSM,
- * Level index of CPICH Received Signal Code Power in UMTS
- */
-} RIL_NeighboringCell;
-
-typedef struct {
- char lce_status; /* LCE service status:
- * -1 = not supported;
- * 0 = stopped;
- * 1 = active.
- */
- unsigned int actual_interval_ms; /* actual LCE reporting interval,
- * meaningful only if LCEStatus = 1.
- */
-} RIL_LceStatusInfo;
-
-typedef struct {
- unsigned int last_hop_capacity_kbps; /* last-hop cellular capacity: kilobits/second. */
- unsigned char confidence_level; /* capacity estimate confidence: 0-100 */
- unsigned char lce_suspended; /* LCE report going to be suspended? (e.g., radio
- * moves to inactive state or network type change)
- * 1 = suspended;
- * 0 = not suspended.
- */
-} RIL_LceDataInfo;
-
-/* See RIL_REQUEST_LAST_CALL_FAIL_CAUSE */
-typedef enum {
- CALL_FAIL_UNOBTAINABLE_NUMBER = 1,
- CALL_FAIL_NORMAL = 16,
- CALL_FAIL_BUSY = 17,
- CALL_FAIL_CONGESTION = 34,
- CALL_FAIL_ACM_LIMIT_EXCEEDED = 68,
- CALL_FAIL_CALL_BARRED = 240,
- CALL_FAIL_FDN_BLOCKED = 241,
- CALL_FAIL_IMSI_UNKNOWN_IN_VLR = 242,
- CALL_FAIL_IMEI_NOT_ACCEPTED = 243,
- CALL_FAIL_DIAL_MODIFIED_TO_USSD = 244, /* STK Call Control */
- CALL_FAIL_DIAL_MODIFIED_TO_SS = 245,
- CALL_FAIL_DIAL_MODIFIED_TO_DIAL = 246,
- CALL_FAIL_CDMA_LOCKED_UNTIL_POWER_CYCLE = 1000,
- CALL_FAIL_CDMA_DROP = 1001,
- CALL_FAIL_CDMA_INTERCEPT = 1002,
- CALL_FAIL_CDMA_REORDER = 1003,
- CALL_FAIL_CDMA_SO_REJECT = 1004,
- CALL_FAIL_CDMA_RETRY_ORDER = 1005,
- CALL_FAIL_CDMA_ACCESS_FAILURE = 1006,
- CALL_FAIL_CDMA_PREEMPTED = 1007,
- CALL_FAIL_CDMA_NOT_EMERGENCY = 1008, /* For non-emergency number dialed
- during emergency callback mode */
- CALL_FAIL_CDMA_ACCESS_BLOCKED = 1009, /* CDMA network access probes blocked */
- CALL_FAIL_ERROR_UNSPECIFIED = 0xffff
-} RIL_LastCallFailCause;
-
-typedef struct {
- RIL_LastCallFailCause cause_code;
- char * vendor_cause;
-} RIL_LastCallFailCauseInfo;
-
-/* See RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE */
-typedef enum {
- PDP_FAIL_NONE = 0, /* No error, connection ok */
-
- /* an integer cause code defined in TS 24.008
- section 6.1.3.1.3 or TS 24.301 Release 8+ Annex B.
- If the implementation does not have access to the exact cause codes,
- then it should return one of the following values,
- as the UI layer needs to distinguish these
- cases for error notification and potential retries. */
- PDP_FAIL_OPERATOR_BARRED = 0x08, /* no retry */
- PDP_FAIL_INSUFFICIENT_RESOURCES = 0x1A,
- PDP_FAIL_MISSING_UKNOWN_APN = 0x1B, /* no retry */
- PDP_FAIL_UNKNOWN_PDP_ADDRESS_TYPE = 0x1C, /* no retry */
- PDP_FAIL_USER_AUTHENTICATION = 0x1D, /* no retry */
- PDP_FAIL_ACTIVATION_REJECT_GGSN = 0x1E, /* no retry */
- PDP_FAIL_ACTIVATION_REJECT_UNSPECIFIED = 0x1F,
- PDP_FAIL_SERVICE_OPTION_NOT_SUPPORTED = 0x20, /* no retry */
- PDP_FAIL_SERVICE_OPTION_NOT_SUBSCRIBED = 0x21, /* no retry */
- PDP_FAIL_SERVICE_OPTION_OUT_OF_ORDER = 0x22,
- PDP_FAIL_NSAPI_IN_USE = 0x23, /* no retry */
- PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* possibly restart radio,
- based on framework config */
- PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32, /* no retry */
- PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33, /* no retry */
- PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34,
- PDP_FAIL_PROTOCOL_ERRORS = 0x6F, /* no retry */
-
- /* Not mentioned in the specification */
- PDP_FAIL_VOICE_REGISTRATION_FAIL = -1,
- PDP_FAIL_DATA_REGISTRATION_FAIL = -2,
-
- /* reasons for data call drop - network/modem disconnect */
- PDP_FAIL_SIGNAL_LOST = -3,
- PDP_FAIL_PREF_RADIO_TECH_CHANGED = -4,/* preferred technology has changed, should retry
- with parameters appropriate for new technology */
- PDP_FAIL_RADIO_POWER_OFF = -5, /* data call was disconnected because radio was resetting,
- powered off - no retry */
- PDP_FAIL_TETHERED_CALL_ACTIVE = -6, /* data call was disconnected by modem because tethered
- mode was up on same APN/data profile - no retry until
- tethered call is off */
-
- PDP_FAIL_ERROR_UNSPECIFIED = 0xffff, /* retry silently */
-} RIL_DataCallFailCause;
-
-/* See RIL_REQUEST_SETUP_DATA_CALL */
-typedef enum {
- RIL_DATA_PROFILE_DEFAULT = 0,
- RIL_DATA_PROFILE_TETHERED = 1,
- RIL_DATA_PROFILE_IMS = 2,
- RIL_DATA_PROFILE_FOTA = 3,
- RIL_DATA_PROFILE_CBS = 4,
- RIL_DATA_PROFILE_OEM_BASE = 1000, /* Start of OEM-specific profiles */
- RIL_DATA_PROFILE_INVALID = 0xFFFFFFFF
-} RIL_DataProfile;
-
-/* Used by RIL_UNSOL_SUPP_SVC_NOTIFICATION */
-typedef struct {
- int notificationType; /*
- * 0 = MO intermediate result code
- * 1 = MT unsolicited result code
- */
- int code; /* See 27.007 7.17
- "code1" for MO
- "code2" for MT. */
- int index; /* CUG index. See 27.007 7.17. */
- int type; /* "type" from 27.007 7.17 (MT only). */
- char * number; /* "number" from 27.007 7.17
- (MT only, may be NULL). */
-} RIL_SuppSvcNotification;
-
-#define RIL_CARD_MAX_APPS 8
-
-typedef enum {
- RIL_CARDSTATE_ABSENT = 0,
- RIL_CARDSTATE_PRESENT = 1,
- RIL_CARDSTATE_ERROR = 2
-} RIL_CardState;
-
-typedef enum {
- RIL_PERSOSUBSTATE_UNKNOWN = 0, /* initial state */
- RIL_PERSOSUBSTATE_IN_PROGRESS = 1, /* in between each lock transition */
- RIL_PERSOSUBSTATE_READY = 2, /* when either SIM or RUIM Perso is finished
- since each app can only have 1 active perso
- involved */
- RIL_PERSOSUBSTATE_SIM_NETWORK = 3,
- RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET = 4,
- RIL_PERSOSUBSTATE_SIM_CORPORATE = 5,
- RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER = 6,
- RIL_PERSOSUBSTATE_SIM_SIM = 7,
- RIL_PERSOSUBSTATE_SIM_NETWORK_PUK = 8, /* The corresponding perso lock is blocked */
- RIL_PERSOSUBSTATE_SIM_NETWORK_SUBSET_PUK = 9,
- RIL_PERSOSUBSTATE_SIM_CORPORATE_PUK = 10,
- RIL_PERSOSUBSTATE_SIM_SERVICE_PROVIDER_PUK = 11,
- RIL_PERSOSUBSTATE_SIM_SIM_PUK = 12,
- RIL_PERSOSUBSTATE_RUIM_NETWORK1 = 13,
- RIL_PERSOSUBSTATE_RUIM_NETWORK2 = 14,
- RIL_PERSOSUBSTATE_RUIM_HRPD = 15,
- RIL_PERSOSUBSTATE_RUIM_CORPORATE = 16,
- RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER = 17,
- RIL_PERSOSUBSTATE_RUIM_RUIM = 18,
- RIL_PERSOSUBSTATE_RUIM_NETWORK1_PUK = 19, /* The corresponding perso lock is blocked */
- RIL_PERSOSUBSTATE_RUIM_NETWORK2_PUK = 20,
- RIL_PERSOSUBSTATE_RUIM_HRPD_PUK = 21,
- RIL_PERSOSUBSTATE_RUIM_CORPORATE_PUK = 22,
- RIL_PERSOSUBSTATE_RUIM_SERVICE_PROVIDER_PUK = 23,
- RIL_PERSOSUBSTATE_RUIM_RUIM_PUK = 24
-} RIL_PersoSubstate;
-
-typedef enum {
- RIL_APPSTATE_UNKNOWN = 0,
- RIL_APPSTATE_DETECTED = 1,
- RIL_APPSTATE_PIN = 2, /* If PIN1 or UPin is required */
- RIL_APPSTATE_PUK = 3, /* If PUK1 or Puk for UPin is required */
- RIL_APPSTATE_SUBSCRIPTION_PERSO = 4, /* perso_substate should be look at
- when app_state is assigned to this value */
- RIL_APPSTATE_READY = 5
-} RIL_AppState;
-
-typedef enum {
- RIL_PINSTATE_UNKNOWN = 0,
- RIL_PINSTATE_ENABLED_NOT_VERIFIED = 1,
- RIL_PINSTATE_ENABLED_VERIFIED = 2,
- RIL_PINSTATE_DISABLED = 3,
- RIL_PINSTATE_ENABLED_BLOCKED = 4,
- RIL_PINSTATE_ENABLED_PERM_BLOCKED = 5
-} RIL_PinState;
-
-typedef enum {
- RIL_APPTYPE_UNKNOWN = 0,
- RIL_APPTYPE_SIM = 1,
- RIL_APPTYPE_USIM = 2,
- RIL_APPTYPE_RUIM = 3,
- RIL_APPTYPE_CSIM = 4,
- RIL_APPTYPE_ISIM = 5
-} RIL_AppType;
-
-typedef struct
-{
- RIL_AppType app_type;
- RIL_AppState app_state;
- RIL_PersoSubstate perso_substate; /* applicable only if app_state ==
- RIL_APPSTATE_SUBSCRIPTION_PERSO */
- char *aid_ptr; /* null terminated string, e.g., from 0xA0, 0x00 -> 0x41,
- 0x30, 0x30, 0x30 */
- char *app_label_ptr; /* null terminated string */
- int pin1_replaced; /* applicable to USIM, CSIM & ISIM */
- RIL_PinState pin1;
- RIL_PinState pin2;
- int foo1; /* Samsung */
- int foo2; /* Samsung */
- int foo3; /* Samsung */
- int foo4; /* Samsung */
- int foo5; /* Samsung */
-} RIL_AppStatus;
-
-/* Deprecated, use RIL_CardStatus_v6 */
-typedef struct
-{
- RIL_CardState card_state;
- RIL_PinState universal_pin_state; /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */
- int gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
- int cdma_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
- int num_applications; /* value <= RIL_CARD_MAX_APPS */
- RIL_AppStatus applications[RIL_CARD_MAX_APPS];
-} RIL_CardStatus_v5;
-
-typedef struct
-{
- RIL_CardState card_state;
- RIL_PinState universal_pin_state; /* applicable to USIM and CSIM: RIL_PINSTATE_xxx */
- int gsm_umts_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
- int cdma_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
- int ims_subscription_app_index; /* value < RIL_CARD_MAX_APPS, -1 if none */
- int num_applications; /* value <= RIL_CARD_MAX_APPS */
- RIL_AppStatus applications[RIL_CARD_MAX_APPS];
-} RIL_CardStatus_v6;
-
-/** The result of a SIM refresh, returned in data[0] of RIL_UNSOL_SIM_REFRESH
- * or as part of RIL_SimRefreshResponse_v7
- */
-typedef enum {
- /* A file on SIM has been updated. data[1] contains the EFID. */
- SIM_FILE_UPDATE = 0,
- /* SIM initialized. All files should be re-read. */
- SIM_INIT = 1,
- /* SIM reset. SIM power required, SIM may be locked and all files should be re-read. */
- SIM_RESET = 2
-} RIL_SimRefreshResult;
-
-typedef struct {
- RIL_SimRefreshResult result;
- int ef_id; /* is the EFID of the updated file if the result is */
- /* SIM_FILE_UPDATE or 0 for any other result. */
- char * aid; /* is AID(application ID) of the card application */
- /* See ETSI 102.221 8.1 and 101.220 4 */
- /* For SIM_FILE_UPDATE result it can be set to AID of */
- /* application in which updated EF resides or it can be */
- /* NULL if EF is outside of an application. */
- /* For SIM_INIT result this field is set to AID of */
- /* application that caused REFRESH */
- /* For SIM_RESET result it is NULL. */
-} RIL_SimRefreshResponse_v7;
-
-/* Deprecated, use RIL_CDMA_CallWaiting_v6 */
-typedef struct {
- char * number; /* Remote party number */
- int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */
- char * name; /* Remote party name */
- RIL_CDMA_SignalInfoRecord signalInfoRecord;
-} RIL_CDMA_CallWaiting_v5;
-
-typedef struct {
- char * number; /* Remote party number */
- int numberPresentation; /* 0=Allowed, 1=Restricted, 2=Not Specified/Unknown */
- char * name; /* Remote party name */
- RIL_CDMA_SignalInfoRecord signalInfoRecord;
- /* Number type/Number plan required to support International Call Waiting */
- int number_type; /* 0=Unknown, 1=International, 2=National,
- 3=Network specific, 4=subscriber */
- int number_plan; /* 0=Unknown, 1=ISDN, 3=Data, 4=Telex, 8=Nat'l, 9=Private */
-} RIL_CDMA_CallWaiting_v6;
-
-/**
- * Which types of Cell Broadcast Message (CBM) are to be received by the ME
- *
- * uFromServiceID - uToServiceID defines a range of CBM message identifiers
- * whose value is 0x0000 - 0xFFFF as defined in TS 23.041 9.4.1.2.2 for GMS
- * and 9.4.4.2.2 for UMTS. All other values can be treated as empty
- * CBM message ID.
- *
- * uFromCodeScheme - uToCodeScheme defines a range of CBM data coding schemes
- * whose value is 0x00 - 0xFF as defined in TS 23.041 9.4.1.2.3 for GMS
- * and 9.4.4.2.3 for UMTS.
- * All other values can be treated as empty CBM data coding scheme.
- *
- * selected 0 means message types specified in <fromServiceId, toServiceId>
- * and <fromCodeScheme, toCodeScheme>are not accepted, while 1 means accepted.
- *
- * Used by RIL_REQUEST_GSM_GET_BROADCAST_CONFIG and
- * RIL_REQUEST_GSM_SET_BROADCAST_CONFIG.
- */
-typedef struct {
- int fromServiceId;
- int toServiceId;
- int fromCodeScheme;
- int toCodeScheme;
- unsigned char selected;
-} RIL_GSM_BroadcastSmsConfigInfo;
-
-/* No restriction at all including voice/SMS/USSD/SS/AV64 and packet data. */
-#define RIL_RESTRICTED_STATE_NONE 0x00
-/* Block emergency call due to restriction. But allow all normal voice/SMS/USSD/SS/AV64. */
-#define RIL_RESTRICTED_STATE_CS_EMERGENCY 0x01
-/* Block all normal voice/SMS/USSD/SS/AV64 due to restriction. Only Emergency call allowed. */
-#define RIL_RESTRICTED_STATE_CS_NORMAL 0x02
-/* Block all voice/SMS/USSD/SS/AV64 including emergency call due to restriction.*/
-#define RIL_RESTRICTED_STATE_CS_ALL 0x04
-/* Block packet data access due to restriction. */
-#define RIL_RESTRICTED_STATE_PS_ALL 0x10
-
-/* The status for an OTASP/OTAPA session */
-typedef enum {
- CDMA_OTA_PROVISION_STATUS_SPL_UNLOCKED,
- CDMA_OTA_PROVISION_STATUS_SPC_RETRIES_EXCEEDED,
- CDMA_OTA_PROVISION_STATUS_A_KEY_EXCHANGED,
- CDMA_OTA_PROVISION_STATUS_SSD_UPDATED,
- CDMA_OTA_PROVISION_STATUS_NAM_DOWNLOADED,
- CDMA_OTA_PROVISION_STATUS_MDN_DOWNLOADED,
- CDMA_OTA_PROVISION_STATUS_IMSI_DOWNLOADED,
- CDMA_OTA_PROVISION_STATUS_PRL_DOWNLOADED,
- CDMA_OTA_PROVISION_STATUS_COMMITTED,
- CDMA_OTA_PROVISION_STATUS_OTAPA_STARTED,
- CDMA_OTA_PROVISION_STATUS_OTAPA_STOPPED,
- CDMA_OTA_PROVISION_STATUS_OTAPA_ABORTED
-} RIL_CDMA_OTA_ProvisionStatus;
-
-typedef struct {
- int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
- int bitErrorRate; /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */
-} RIL_GW_SignalStrength;
-
-typedef struct {
- int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
- int bitErrorRate; /* bit error rate (0-7, 99) as defined in TS 27.007 8.5 */
-} RIL_SignalStrengthWcdma;
-
-typedef struct {
- int dbm; /* Valid values are positive integers. This value is the actual RSSI value
- * multiplied by -1. Example: If the actual RSSI is -75, then this response
- * value will be 75.
- */
- int ecio; /* Valid values are positive integers. This value is the actual Ec/Io multiplied
- * by -10. Example: If the actual Ec/Io is -12.5 dB, then this response value
- * will be 125.
- */
-} RIL_CDMA_SignalStrength;
-
-
-typedef struct {
- int dbm; /* Valid values are positive integers. This value is the actual RSSI value
- * multiplied by -1. Example: If the actual RSSI is -75, then this response
- * value will be 75.
- */
- int ecio; /* Valid values are positive integers. This value is the actual Ec/Io multiplied
- * by -10. Example: If the actual Ec/Io is -12.5 dB, then this response value
- * will be 125.
- */
- int signalNoiseRatio; /* Valid values are 0-8. 8 is the highest signal to noise ratio. */
-} RIL_EVDO_SignalStrength;
-
-typedef struct {
- int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
- int rsrp; /* The current Reference Signal Receive Power in dBm multipled by -1.
- * Range: 44 to 140 dBm
- * INT_MAX: 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 36.133 9.1.4 */
- int rsrq; /* The current Reference Signal Receive Quality in dB multiplied by -1.
- * Range: 20 to 3 dB.
- * INT_MAX: 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 36.133 9.1.7 */
- int rssnr; /* The current reference signal signal-to-noise ratio in 0.1 dB units.
- * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
- * INT_MAX : 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 36.101 8.1.1 */
- int cqi; /* The current Channel Quality Indicator.
- * Range: 0 to 15.
- * INT_MAX : 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */
-} RIL_LTE_SignalStrength;
-
-typedef struct {
- int signalStrength; /* Valid values are (0-31, 99) as defined in TS 27.007 8.5 */
- int rsrp; /* The current Reference Signal Receive Power in dBm multipled by -1.
- * Range: 44 to 140 dBm
- * INT_MAX: 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 36.133 9.1.4 */
- int rsrq; /* The current Reference Signal Receive Quality in dB multiplied by -1.
- * Range: 20 to 3 dB.
- * INT_MAX: 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 36.133 9.1.7 */
- int rssnr; /* The current reference signal signal-to-noise ratio in 0.1 dB units.
- * Range: -200 to +300 (-200 = -20.0 dB, +300 = 30dB).
- * INT_MAX : 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 36.101 8.1.1 */
- int cqi; /* The current Channel Quality Indicator.
- * Range: 0 to 15.
- * INT_MAX : 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 36.101 9.2, 9.3, A.4 */
- int timingAdvance; /* timing advance in micro seconds for a one way trip from cell to device.
- * Approximate distance can be calculated using 300m/us * timingAdvance.
- * Range: 0 to 0x7FFFFFFE
- * INT_MAX : 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP 36.321 section 6.1.3.5
- * also: http://www.cellular-planningoptimization.com/2010/02/timing-advance-with-calculation.html */
-} RIL_LTE_SignalStrength_v8;
-
-typedef struct {
- int rscp; /* The Received Signal Code Power in dBm multipled by -1.
- * Range : 25 to 120
- * INT_MAX: 0x7FFFFFFF denotes invalid value.
- * Reference: 3GPP TS 25.123, section 9.1.1.1 */
-} RIL_TD_SCDMA_SignalStrength;
-
-/* Deprecated, use RIL_SignalStrength_v6 */
-typedef struct {
- RIL_GW_SignalStrength GW_SignalStrength;
- RIL_CDMA_SignalStrength CDMA_SignalStrength;
- RIL_EVDO_SignalStrength EVDO_SignalStrength;
-} RIL_SignalStrength_v5;
-
-typedef struct {
- RIL_GW_SignalStrength GW_SignalStrength;
- RIL_CDMA_SignalStrength CDMA_SignalStrength;
- RIL_EVDO_SignalStrength EVDO_SignalStrength;
- RIL_LTE_SignalStrength LTE_SignalStrength;
-} RIL_SignalStrength_v6;
-
-typedef struct {
- RIL_GW_SignalStrength GW_SignalStrength;
- RIL_CDMA_SignalStrength CDMA_SignalStrength;
- RIL_EVDO_SignalStrength EVDO_SignalStrength;
- RIL_LTE_SignalStrength_v8 LTE_SignalStrength;
-} RIL_SignalStrength_v8;
-
-typedef struct {
- RIL_GW_SignalStrength GW_SignalStrength;
- RIL_CDMA_SignalStrength CDMA_SignalStrength;
- RIL_EVDO_SignalStrength EVDO_SignalStrength;
- RIL_LTE_SignalStrength_v8 LTE_SignalStrength;
- RIL_TD_SCDMA_SignalStrength TD_SCDMA_SignalStrength;
-} RIL_SignalStrength_v10;
-
-/** RIL_CellIdentityGsm */
-typedef struct {
- int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */
- int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */
- int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */
- int cid; /* 16-bit GSM Cell Identity described in TS 27.007, 0..65535, INT_MAX if unknown */
-} RIL_CellIdentityGsm;
-
-/** RIL_CellIdentityWcdma */
-typedef struct {
- int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */
- int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */
- int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */
- int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */
- int psc; /* 9-bit UMTS Primary Scrambling Code described in TS 25.331, 0..511, INT_MAX if unknown */
-} RIL_CellIdentityWcdma;
-
-/** RIL_CellIdentityCdma */
-typedef struct {
- int networkId; /* Network Id 0..65535, INT_MAX if unknown */
- int systemId; /* CDMA System Id 0..32767, INT_MAX if unknown */
- int basestationId; /* Base Station Id 0..65535, INT_MAX if unknown */
- int longitude; /* Longitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0.
- * It is represented in units of 0.25 seconds and ranges from -2592000
- * to 2592000, both values inclusive (corresponding to a range of -180
- * to +180 degrees). INT_MAX if unknown */
-
- int latitude; /* Latitude is a decimal number as specified in 3GPP2 C.S0005-A v6.0.
- * It is represented in units of 0.25 seconds and ranges from -1296000
- * to 1296000, both values inclusive (corresponding to a range of -90
- * to +90 degrees). INT_MAX if unknown */
-} RIL_CellIdentityCdma;
-
-/** RIL_CellIdentityLte */
-typedef struct {
- int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */
- int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */
- int ci; /* 28-bit Cell Identity described in TS ???, INT_MAX if unknown */
- int pci; /* physical cell id 0..503, INT_MAX if unknown */
- int tac; /* 16-bit tracking area code, INT_MAX if unknown */
-} RIL_CellIdentityLte;
-
-/** RIL_CellIdentityTdscdma */
-typedef struct {
- int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */
- int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */
- int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */
- int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */
- int cpid; /* 8-bit Cell Parameters ID described in TS 25.331, 0..127, INT_MAX if unknown */
-} RIL_CellIdentityTdscdma;
-
-/** RIL_CellInfoGsm */
-typedef struct {
- RIL_CellIdentityGsm cellIdentityGsm;
- RIL_GW_SignalStrength signalStrengthGsm;
-} RIL_CellInfoGsm;
-
-/** RIL_CellInfoWcdma */
-typedef struct {
- RIL_CellIdentityWcdma cellIdentityWcdma;
- RIL_SignalStrengthWcdma signalStrengthWcdma;
-} RIL_CellInfoWcdma;
-
-/** RIL_CellInfoCdma */
-typedef struct {
- RIL_CellIdentityCdma cellIdentityCdma;
- RIL_CDMA_SignalStrength signalStrengthCdma;
- RIL_EVDO_SignalStrength signalStrengthEvdo;
-} RIL_CellInfoCdma;
-
-/** RIL_CellInfoLte */
-typedef struct {
- RIL_CellIdentityLte cellIdentityLte;
- RIL_LTE_SignalStrength_v8 signalStrengthLte;
-} RIL_CellInfoLte;
-
-/** RIL_CellInfoTdscdma */
-typedef struct {
- RIL_CellIdentityTdscdma cellIdentityTdscdma;
- RIL_TD_SCDMA_SignalStrength signalStrengthTdscdma;
-} RIL_CellInfoTdscdma;
-
-// Must be the same as CellInfo.TYPE_XXX
-typedef enum {
- RIL_CELL_INFO_TYPE_GSM = 1,
- RIL_CELL_INFO_TYPE_CDMA = 2,
- RIL_CELL_INFO_TYPE_LTE = 3,
- RIL_CELL_INFO_TYPE_WCDMA = 4,
- RIL_CELL_INFO_TYPE_TD_SCDMA = 5
-} RIL_CellInfoType;
-
-// Must be the same as CellInfo.TIMESTAMP_TYPE_XXX
-typedef enum {
- RIL_TIMESTAMP_TYPE_UNKNOWN = 0,
- RIL_TIMESTAMP_TYPE_ANTENNA = 1,
- RIL_TIMESTAMP_TYPE_MODEM = 2,
- RIL_TIMESTAMP_TYPE_OEM_RIL = 3,
- RIL_TIMESTAMP_TYPE_JAVA_RIL = 4,
-} RIL_TimeStampType;
-
-typedef struct {
- RIL_CellInfoType cellInfoType; /* cell type for selecting from union CellInfo */
- int registered; /* !0 if this cell is registered 0 if not registered */
- RIL_TimeStampType timeStampType; /* type of time stamp represented by timeStamp */
- uint64_t timeStamp; /* Time in nanos as returned by ril_nano_time */
- union {
- RIL_CellInfoGsm gsm;
- RIL_CellInfoCdma cdma;
- RIL_CellInfoLte lte;
- RIL_CellInfoWcdma wcdma;
- RIL_CellInfoTdscdma tdscdma;
- } CellInfo;
-} RIL_CellInfo;
-
-/* Names of the CDMA info records (C.S0005 section 3.7.5) */
-typedef enum {
- RIL_CDMA_DISPLAY_INFO_REC,
- RIL_CDMA_CALLED_PARTY_NUMBER_INFO_REC,
- RIL_CDMA_CALLING_PARTY_NUMBER_INFO_REC,
- RIL_CDMA_CONNECTED_NUMBER_INFO_REC,
- RIL_CDMA_SIGNAL_INFO_REC,
- RIL_CDMA_REDIRECTING_NUMBER_INFO_REC,
- RIL_CDMA_LINE_CONTROL_INFO_REC,
- RIL_CDMA_EXTENDED_DISPLAY_INFO_REC,
- RIL_CDMA_T53_CLIR_INFO_REC,
- RIL_CDMA_T53_RELEASE_INFO_REC,
- RIL_CDMA_T53_AUDIO_CONTROL_INFO_REC
-} RIL_CDMA_InfoRecName;
-
-/* Display Info Rec as defined in C.S0005 section 3.7.5.1
- Extended Display Info Rec as defined in C.S0005 section 3.7.5.16
- Note: the Extended Display info rec contains multiple records of the
- form: display_tag, display_len, and display_len occurrences of the
- chari field if the display_tag is not 10000000 or 10000001.
- To save space, the records are stored consecutively in a byte buffer.
- The display_tag, display_len and chari fields are all 1 byte.
-*/
-
-typedef struct {
- char alpha_len;
- char alpha_buf[CDMA_ALPHA_INFO_BUFFER_LENGTH];
-} RIL_CDMA_DisplayInfoRecord;
-
-/* Called Party Number Info Rec as defined in C.S0005 section 3.7.5.2
- Calling Party Number Info Rec as defined in C.S0005 section 3.7.5.3
- Connected Number Info Rec as defined in C.S0005 section 3.7.5.4
-*/
-
-typedef struct {
- char len;
- char buf[CDMA_NUMBER_INFO_BUFFER_LENGTH];
- char number_type;
- char number_plan;
- char pi;
- char si;
-} RIL_CDMA_NumberInfoRecord;
-
-/* Redirecting Number Information Record as defined in C.S0005 section 3.7.5.11 */
-typedef enum {
- RIL_REDIRECTING_REASON_UNKNOWN = 0,
- RIL_REDIRECTING_REASON_CALL_FORWARDING_BUSY = 1,
- RIL_REDIRECTING_REASON_CALL_FORWARDING_NO_REPLY = 2,
- RIL_REDIRECTING_REASON_CALLED_DTE_OUT_OF_ORDER = 9,
- RIL_REDIRECTING_REASON_CALL_FORWARDING_BY_THE_CALLED_DTE = 10,
- RIL_REDIRECTING_REASON_CALL_FORWARDING_UNCONDITIONAL = 15,
- RIL_REDIRECTING_REASON_RESERVED
-} RIL_CDMA_RedirectingReason;
-
-typedef struct {
- RIL_CDMA_NumberInfoRecord redirectingNumber;
- /* redirectingReason is set to RIL_REDIRECTING_REASON_UNKNOWN if not included */
- RIL_CDMA_RedirectingReason redirectingReason;
-} RIL_CDMA_RedirectingNumberInfoRecord;
-
-/* Line Control Information Record as defined in C.S0005 section 3.7.5.15 */
-typedef struct {
- char lineCtrlPolarityIncluded;
- char lineCtrlToggle;
- char lineCtrlReverse;
- char lineCtrlPowerDenial;
-} RIL_CDMA_LineControlInfoRecord;
-
-/* T53 CLIR Information Record */
-typedef struct {
- char cause;
-} RIL_CDMA_T53_CLIRInfoRecord;
-
-/* T53 Audio Control Information Record */
-typedef struct {
- char upLink;
- char downLink;
-} RIL_CDMA_T53_AudioControlInfoRecord;
-
-typedef struct {
-
- RIL_CDMA_InfoRecName name;
-
- union {
- /* Display and Extended Display Info Rec */
- RIL_CDMA_DisplayInfoRecord display;
-
- /* Called Party Number, Calling Party Number, Connected Number Info Rec */
- RIL_CDMA_NumberInfoRecord number;
-
- /* Signal Info Rec */
- RIL_CDMA_SignalInfoRecord signal;
-
- /* Redirecting Number Info Rec */
- RIL_CDMA_RedirectingNumberInfoRecord redir;
-
- /* Line Control Info Rec */
- RIL_CDMA_LineControlInfoRecord lineCtrl;
-
- /* T53 CLIR Info Rec */
- RIL_CDMA_T53_CLIRInfoRecord clir;
-
- /* T53 Audio Control Info Rec */
- RIL_CDMA_T53_AudioControlInfoRecord audioCtrl;
- } rec;
-} RIL_CDMA_InformationRecord;
-
-#define RIL_CDMA_MAX_NUMBER_OF_INFO_RECS 10
-
-typedef struct {
- char numberOfInfoRecs;
- RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS];
-} RIL_CDMA_InformationRecords;
-
-/* See RIL_REQUEST_NV_READ_ITEM */
-typedef struct {
- RIL_NV_Item itemID;
-} RIL_NV_ReadItem;
-
-/* See RIL_REQUEST_NV_WRITE_ITEM */
-typedef struct {
- RIL_NV_Item itemID;
- char * value;
-} RIL_NV_WriteItem;
-
-typedef enum {
- HANDOVER_STARTED = 0,
- HANDOVER_COMPLETED = 1,
- HANDOVER_FAILED = 2,
- HANDOVER_CANCELED = 3
-} RIL_SrvccState;
-
-/* hardware configuration reported to RILJ. */
-typedef enum {
- RIL_HARDWARE_CONFIG_MODEM = 0,
- RIL_HARDWARE_CONFIG_SIM = 1,
-} RIL_HardwareConfig_Type;
-
-typedef enum {
- RIL_HARDWARE_CONFIG_STATE_ENABLED = 0,
- RIL_HARDWARE_CONFIG_STATE_STANDBY = 1,
- RIL_HARDWARE_CONFIG_STATE_DISABLED = 2,
-} RIL_HardwareConfig_State;
-
-typedef struct {
- int rilModel;
- uint32_t rat; /* bitset - ref. RIL_RadioTechnology. */
- int maxVoice;
- int maxData;
- int maxStandby;
-} RIL_HardwareConfig_Modem;
-
-typedef struct {
- char modemUuid[MAX_UUID_LENGTH];
-} RIL_HardwareConfig_Sim;
-
-typedef struct {
- RIL_HardwareConfig_Type type;
- char uuid[MAX_UUID_LENGTH];
- RIL_HardwareConfig_State state;
- union {
- RIL_HardwareConfig_Modem modem;
- RIL_HardwareConfig_Sim sim;
- } cfg;
-} RIL_HardwareConfig;
-
-typedef enum {
- SS_CFU,
- SS_CF_BUSY,
- SS_CF_NO_REPLY,
- SS_CF_NOT_REACHABLE,
- SS_CF_ALL,
- SS_CF_ALL_CONDITIONAL,
- SS_CLIP,
- SS_CLIR,
- SS_COLP,
- SS_COLR,
- SS_WAIT,
- SS_BAOC,
- SS_BAOIC,
- SS_BAOIC_EXC_HOME,
- SS_BAIC,
- SS_BAIC_ROAMING,
- SS_ALL_BARRING,
- SS_OUTGOING_BARRING,
- SS_INCOMING_BARRING
-} RIL_SsServiceType;
-
-typedef enum {
- SS_ACTIVATION,
- SS_DEACTIVATION,
- SS_INTERROGATION,
- SS_REGISTRATION,
- SS_ERASURE
-} RIL_SsRequestType;
-
-typedef enum {
- SS_ALL_TELE_AND_BEARER_SERVICES,
- SS_ALL_TELESEVICES,
- SS_TELEPHONY,
- SS_ALL_DATA_TELESERVICES,
- SS_SMS_SERVICES,
- SS_ALL_TELESERVICES_EXCEPT_SMS
-} RIL_SsTeleserviceType;
-
-#define SS_INFO_MAX 4
-#define NUM_SERVICE_CLASSES 7
-
-typedef struct {
- int numValidIndexes; /* This gives the number of valid values in cfInfo.
- For example if voice is forwarded to one number and data
- is forwarded to a different one then numValidIndexes will be
- 2 indicating total number of valid values in cfInfo.
- Similarly if all the services are forwarded to the same
- number then the value of numValidIndexes will be 1. */
-
- RIL_CallForwardInfo cfInfo[NUM_SERVICE_CLASSES]; /* This is the response data
- for SS request to query call
- forward status. see
- RIL_REQUEST_QUERY_CALL_FORWARD_STATUS */
-} RIL_CfData;
-
-typedef struct {
- RIL_SsServiceType serviceType;
- RIL_SsRequestType requestType;
- RIL_SsTeleserviceType teleserviceType;
- int serviceClass;
- RIL_Errno result;
-
- union {
- int ssInfo[SS_INFO_MAX]; /* This is the response data for most of the SS GET/SET
- RIL requests. E.g. RIL_REQUSET_GET_CLIR returns
- two ints, so first two values of ssInfo[] will be
- used for response if serviceType is SS_CLIR and
- requestType is SS_INTERROGATION */
-
- RIL_CfData cfData;
- };
-} RIL_StkCcUnsolSsResponse;
-
-/**
- * Data connection power state
- */
-typedef enum {
- RIL_DC_POWER_STATE_LOW = 1, // Low power state
- RIL_DC_POWER_STATE_MEDIUM = 2, // Medium power state
- RIL_DC_POWER_STATE_HIGH = 3, // High power state
- RIL_DC_POWER_STATE_UNKNOWN = INT32_MAX // Unknown state
-} RIL_DcPowerStates;
-
-/**
- * Data connection real time info
- */
-typedef struct {
- uint64_t time; // Time in nanos as returned by ril_nano_time
- RIL_DcPowerStates powerState; // Current power state
-} RIL_DcRtInfo;
-
-/**
- * Data profile to modem
- */
-typedef struct {
- /* id of the data profile */
- int profileId;
- /* the APN to connect to */
- char* apn;
- /** one of the PDP_type values in TS 27.007 section 10.1.1.
- * For example, "IP", "IPV6", "IPV4V6", or "PPP".
- */
- char* protocol;
- /** authentication protocol used for this PDP context
- * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3)
- */
- int authType;
- /* the username for APN, or NULL */
- char* user;
- /* the password for APN, or NULL */
- char* password;
- /* the profile type, TYPE_COMMON-0, TYPE_3GPP-1, TYPE_3GPP2-2 */
- int type;
- /* the period in seconds to limit the maximum connections */
- int maxConnsTime;
- /* the maximum connections during maxConnsTime */
- int maxConns;
- /** the required wait time in seconds after a successful UE initiated
- * disconnect of a given PDN connection before the device can send
- * a new PDN connection request for that given PDN
- */
- int waitTime;
- /* true to enable the profile, 0 to disable, 1 to enable */
- int enabled;
-} RIL_DataProfileInfo;
-
-/* Tx Power Levels */
-#define RIL_NUM_TX_POWER_LEVELS 5
-
-typedef struct {
-
- /* period (in ms) when modem is power collapsed */
- uint32_t sleep_mode_time_ms;
-
- /* period (in ms) when modem is awake and in idle mode*/
- uint32_t idle_mode_time_ms;
-
- /* period (in ms) for which Tx is active */
- uint32_t tx_mode_time_ms[RIL_NUM_TX_POWER_LEVELS];
-
- /* period (in ms) for which Rx is active */
- uint32_t rx_mode_time_ms;
-} RIL_ActivityStatsInfo;
-
-/**
- * RIL_REQUEST_GET_SIM_STATUS
- *
- * Requests status of the SIM interface and the SIM card
- *
- * "data" is NULL
- *
- * "response" is const RIL_CardStatus_v6 *
- *
- * Valid errors:
- * Must never fail
- */
-#define RIL_REQUEST_GET_SIM_STATUS 1
-
-/**
- * RIL_REQUEST_ENTER_SIM_PIN
- *
- * Supplies SIM PIN. Only called if RIL_CardStatus has RIL_APPSTATE_PIN state
- *
- * "data" is const char **
- * ((const char **)data)[0] is PIN value
- * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * PASSWORD_INCORRECT
- */
-
-#define RIL_REQUEST_ENTER_SIM_PIN 2
-
-/**
- * RIL_REQUEST_ENTER_SIM_PUK
- *
- * Supplies SIM PUK and new PIN.
- *
- * "data" is const char **
- * ((const char **)data)[0] is PUK value
- * ((const char **)data)[1] is new PIN value
- * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * PASSWORD_INCORRECT
- * (PUK is invalid)
- */
-
-#define RIL_REQUEST_ENTER_SIM_PUK 3
-
-/**
- * RIL_REQUEST_ENTER_SIM_PIN2
- *
- * Supplies SIM PIN2. Only called following operation where SIM_PIN2 was
- * returned as a a failure from a previous operation.
- *
- * "data" is const char **
- * ((const char **)data)[0] is PIN2 value
- * ((const char **)data)[1] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * PASSWORD_INCORRECT
- */
-
-#define RIL_REQUEST_ENTER_SIM_PIN2 4
-
-/**
- * RIL_REQUEST_ENTER_SIM_PUK2
- *
- * Supplies SIM PUK2 and new PIN2.
- *
- * "data" is const char **
- * ((const char **)data)[0] is PUK2 value
- * ((const char **)data)[1] is new PIN2 value
- * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * PASSWORD_INCORRECT
- * (PUK2 is invalid)
- */
-
-#define RIL_REQUEST_ENTER_SIM_PUK2 5
-
-/**
- * RIL_REQUEST_CHANGE_SIM_PIN
- *
- * Supplies old SIM PIN and new PIN.
- *
- * "data" is const char **
- * ((const char **)data)[0] is old PIN value
- * ((const char **)data)[1] is new PIN value
- * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * PASSWORD_INCORRECT
- * (old PIN is invalid)
- *
- */
-
-#define RIL_REQUEST_CHANGE_SIM_PIN 6
-
-
-/**
- * RIL_REQUEST_CHANGE_SIM_PIN2
- *
- * Supplies old SIM PIN2 and new PIN2.
- *
- * "data" is const char **
- * ((const char **)data)[0] is old PIN2 value
- * ((const char **)data)[1] is new PIN2 value
- * ((const char **)data)[2] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * PASSWORD_INCORRECT
- * (old PIN2 is invalid)
- *
- */
-
-#define RIL_REQUEST_CHANGE_SIM_PIN2 7
-
-/**
- * RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION
- *
- * Requests that network personlization be deactivated
- *
- * "data" is const char **
- * ((const char **)(data))[0]] is network depersonlization code
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * PASSWORD_INCORRECT
- * (code is invalid)
- */
-
-#define RIL_REQUEST_ENTER_NETWORK_DEPERSONALIZATION 8
-
-/**
- * RIL_REQUEST_GET_CURRENT_CALLS
- *
- * Requests current call list
- *
- * "data" is NULL
- *
- * "response" must be a "const RIL_Call **"
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * (request will be made again in a few hundred msec)
- */
-
-#define RIL_REQUEST_GET_CURRENT_CALLS 9
-
-
-/**
- * RIL_REQUEST_DIAL
- *
- * Initiate voice call
- *
- * "data" is const RIL_Dial *
- * "response" is NULL
- *
- * This method is never used for supplementary service codes
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * DIAL_MODIFIED_TO_USSD
- * DIAL_MODIFIED_TO_SS
- * DIAL_MODIFIED_TO_DIAL
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_DIAL 10
-
-/**
- * RIL_REQUEST_GET_IMSI
- *
- * Get the SIM IMSI
- *
- * Only valid when radio state is "RADIO_STATE_ON"
- *
- * "data" is const char **
- * ((const char **)data)[0] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- * "response" is a const char * containing the IMSI
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_GET_IMSI 11
-
-/**
- * RIL_REQUEST_HANGUP
- *
- * Hang up a specific line (like AT+CHLD=1x)
- *
- * After this HANGUP request returns, RIL should show the connection is NOT
- * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
- *
- * "data" is an int *
- * (int *)data)[0] contains Connection index (value of 'x' in CHLD above)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_HANGUP 12
-
-/**
- * RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND
- *
- * Hang up waiting or held (like AT+CHLD=0)
- *
- * After this HANGUP request returns, RIL should show the connection is NOT
- * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_HANGUP_WAITING_OR_BACKGROUND 13
-
-/**
- * RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND
- *
- * Hang up waiting or held (like AT+CHLD=1)
- *
- * After this HANGUP request returns, RIL should show the connection is NOT
- * active anymore in next RIL_REQUEST_GET_CURRENT_CALLS query.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_HANGUP_FOREGROUND_RESUME_BACKGROUND 14
-
-/**
- * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE
- *
- * Switch waiting or holding call and active call (like AT+CHLD=2)
- *
- * State transitions should be is follows:
- *
- * If call 1 is waiting and call 2 is active, then if this re
- *
- * BEFORE AFTER
- * Call 1 Call 2 Call 1 Call 2
- * ACTIVE HOLDING HOLDING ACTIVE
- * ACTIVE WAITING HOLDING ACTIVE
- * HOLDING WAITING HOLDING ACTIVE
- * ACTIVE IDLE HOLDING IDLE
- * IDLE IDLE IDLE IDLE
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE 15
-#define RIL_REQUEST_SWITCH_HOLDING_AND_ACTIVE 15
-
-/**
- * RIL_REQUEST_CONFERENCE
- *
- * Conference holding and active (like AT+CHLD=3)
-
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_CONFERENCE 16
-
-/**
- * RIL_REQUEST_UDUB
- *
- * Send UDUB (user determined used busy) to ringing or
- * waiting call answer)(RIL_BasicRequest r);
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_UDUB 17
-
-/**
- * RIL_REQUEST_LAST_CALL_FAIL_CAUSE
- *
- * Requests the failure cause code for the most recently terminated call
- *
- * "data" is NULL
- * "response" is a "int *"
- * ((int *)response)[0] is RIL_LastCallFailCause. GSM failure reasons are
- * mapped to cause codes defined in TS 24.008 Annex H where possible. CDMA
- * failure reasons are derived from the possible call failure scenarios
- * described in the "CDMA IS-2000 Release A (C.S0005-A v6.0)" standard.
- *
- * The implementation should return CALL_FAIL_ERROR_UNSPECIFIED for blocked
- * MO calls by restricted state (See RIL_UNSOL_RESTRICTED_STATE_CHANGED)
- *
- * If the implementation does not have access to the exact cause codes,
- * then it should return one of the values listed in RIL_LastCallFailCause,
- * as the UI layer needs to distinguish these cases for tone generation or
- * error notification.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE
- */
-#define RIL_REQUEST_LAST_CALL_FAIL_CAUSE 18
-
-/**
- * RIL_REQUEST_SIGNAL_STRENGTH
- *
- * Requests current signal strength and associated information
- *
- * Must succeed if radio is on.
- *
- * "data" is NULL
- *
- * "response" is a const RIL_SignalStrength *
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- */
-#define RIL_REQUEST_SIGNAL_STRENGTH 19
-
-/**
- * RIL_REQUEST_VOICE_REGISTRATION_STATE
- *
- * Request current registration state
- *
- * "data" is NULL
- * "response" is a "char **"
- * ((const char **)response)[0] is registration state 0-6,
- * 0 - Not registered, MT is not currently searching
- * a new operator to register
- * 1 - Registered, home network
- * 2 - Not registered, but MT is currently searching
- * a new operator to register
- * 3 - Registration denied
- * 4 - Unknown
- * 5 - Registered, roaming
- * 10 - Same as 0, but indicates that emergency calls
- * are enabled.
- * 12 - Same as 2, but indicates that emergency calls
- * are enabled.
- * 13 - Same as 3, but indicates that emergency calls
- * are enabled.
- * 14 - Same as 4, but indicates that emergency calls
- * are enabled.
- *
- * ((const char **)response)[1] is LAC if registered on a GSM/WCDMA system or
- * NULL if not.Valid LAC are 0x0000 - 0xffff
- * ((const char **)response)[2] is CID if registered on a * GSM/WCDMA or
- * NULL if not.
- * Valid CID are 0x00000000 - 0xffffffff
- * In GSM, CID is Cell ID (see TS 27.007)
- * in 16 bits
- * In UMTS, CID is UMTS Cell Identity
- * (see TS 25.331) in 28 bits
- * ((const char **)response)[3] indicates the available voice radio technology,
- * valid values as defined by RIL_RadioTechnology.
- * ((const char **)response)[4] is Base Station ID if registered on a CDMA
- * system or NULL if not. Base Station ID in
- * decimal format
- * ((const char **)response)[5] is Base Station latitude if registered on a
- * CDMA system or NULL if not. Base Station
- * latitude is a decimal number as specified in
- * 3GPP2 C.S0005-A v6.0. It is represented in
- * units of 0.25 seconds and ranges from -1296000
- * to 1296000, both values inclusive (corresponding
- * to a range of -90 to +90 degrees).
- * ((const char **)response)[6] is Base Station longitude if registered on a
- * CDMA system or NULL if not. Base Station
- * longitude is a decimal number as specified in
- * 3GPP2 C.S0005-A v6.0. It is represented in
- * units of 0.25 seconds and ranges from -2592000
- * to 2592000, both values inclusive (corresponding
- * to a range of -180 to +180 degrees).
- * ((const char **)response)[7] is concurrent services support indicator if
- * registered on a CDMA system 0-1.
- * 0 - Concurrent services not supported,
- * 1 - Concurrent services supported
- * ((const char **)response)[8] is System ID if registered on a CDMA system or
- * NULL if not. Valid System ID are 0 - 32767
- * ((const char **)response)[9] is Network ID if registered on a CDMA system or
- * NULL if not. Valid System ID are 0 - 65535
- * ((const char **)response)[10] is the TSB-58 Roaming Indicator if registered
- * on a CDMA or EVDO system or NULL if not. Valid values
- * are 0-255.
- * ((const char **)response)[11] indicates whether the current system is in the
- * PRL if registered on a CDMA or EVDO system or NULL if
- * not. 0=not in the PRL, 1=in the PRL
- * ((const char **)response)[12] is the default Roaming Indicator from the PRL,
- * if registered on a CDMA or EVDO system or NULL if not.
- * Valid values are 0-255.
- * ((const char **)response)[13] if registration state is 3 (Registration
- * denied) this is an enumerated reason why
- * registration was denied. See 3GPP TS 24.008,
- * 10.5.3.6 and Annex G.
- * 0 - General
- * 1 - Authentication Failure
- * 2 - IMSI unknown in HLR
- * 3 - Illegal MS
- * 4 - Illegal ME
- * 5 - PLMN not allowed
- * 6 - Location area not allowed
- * 7 - Roaming not allowed
- * 8 - No Suitable Cells in this Location Area
- * 9 - Network failure
- * 10 - Persistent location update reject
- * 11 - PLMN not allowed
- * 12 - Location area not allowed
- * 13 - Roaming not allowed in this Location Area
- * 15 - No Suitable Cells in this Location Area
- * 17 - Network Failure
- * 20 - MAC Failure
- * 21 - Sync Failure
- * 22 - Congestion
- * 23 - GSM Authentication unacceptable
- * 25 - Not Authorized for this CSG
- * 32 - Service option not supported
- * 33 - Requested service option not subscribed
- * 34 - Service option temporarily out of order
- * 38 - Call cannot be identified
- * 48-63 - Retry upon entry into a new cell
- * 95 - Semantically incorrect message
- * 96 - Invalid mandatory information
- * 97 - Message type non-existent or not implemented
- * 98 - Message not compatible with protocol state
- * 99 - Information element non-existent or not implemented
- * 100 - Conditional IE error
- * 101 - Message not compatible with protocol state
- * 111 - Protocol error, unspecified
- * ((const char **)response)[14] is the Primary Scrambling Code of the current
- * cell as described in TS 25.331, in hexadecimal
- * format, or NULL if unknown or not registered
- * to a UMTS network.
- *
- * Please note that registration state 4 ("unknown") is treated
- * as "out of service" in the Android telephony system
- *
- * Registration state 3 can be returned if Location Update Reject
- * (with cause 17 - Network Failure) is received repeatedly from the network,
- * to facilitate "managed roaming"
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_VOICE_REGISTRATION_STATE 20
-
-/**
- * RIL_REQUEST_DATA_REGISTRATION_STATE
- *
- * Request current DATA registration state
- *
- * "data" is NULL
- * "response" is a "char **"
- * ((const char **)response)[0] is registration state 0-5 from TS 27.007 10.1.20 AT+CGREG
- * ((const char **)response)[1] is LAC if registered or NULL if not
- * ((const char **)response)[2] is CID if registered or NULL if not
- * ((const char **)response)[3] indicates the available data radio technology,
- * valid values as defined by RIL_RadioTechnology.
- * ((const char **)response)[4] if registration state is 3 (Registration
- * denied) this is an enumerated reason why
- * registration was denied. See 3GPP TS 24.008,
- * Annex G.6 "Additonal cause codes for GMM".
- * 7 == GPRS services not allowed
- * 8 == GPRS services and non-GPRS services not allowed
- * 9 == MS identity cannot be derived by the network
- * 10 == Implicitly detached
- * 14 == GPRS services not allowed in this PLMN
- * 16 == MSC temporarily not reachable
- * 40 == No PDP context activated
- * ((const char **)response)[5] The maximum number of simultaneous Data Calls that can be
- * established using RIL_REQUEST_SETUP_DATA_CALL.
- *
- * The values at offsets 6..10 are optional LTE location information in decimal.
- * If a value is unknown that value may be NULL. If all values are NULL,
- * none need to be present.
- * ((const char **)response)[6] is TAC, a 16-bit Tracking Area Code.
- * ((const char **)response)[7] is CID, a 0-503 Physical Cell Identifier.
- * ((const char **)response)[8] is ECI, a 28-bit E-UTRAN Cell Identifier.
- * ((const char **)response)[9] is CSGID, a 27-bit Closed Subscriber Group Identity.
- * ((const char **)response)[10] is TADV, a 6-bit timing advance value.
- *
- * LAC and CID are in hexadecimal format.
- * valid LAC are 0x0000 - 0xffff
- * valid CID are 0x00000000 - 0x0fffffff
- *
- * Please note that registration state 4 ("unknown") is treated
- * as "out of service" in the Android telephony system
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_DATA_REGISTRATION_STATE 21
-
-/**
- * RIL_REQUEST_OPERATOR
- *
- * Request current operator ONS or EONS
- *
- * "data" is NULL
- * "response" is a "const char **"
- * ((const char **)response)[0] is long alpha ONS or EONS
- * or NULL if unregistered
- *
- * ((const char **)response)[1] is short alpha ONS or EONS
- * or NULL if unregistered
- * ((const char **)response)[2] is 5 or 6 digit numeric code (MCC + MNC)
- * or NULL if unregistered
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_OPERATOR 22
-
-/**
- * RIL_REQUEST_RADIO_POWER
- *
- * Toggle radio on and off (for "airplane" mode)
- * If the radio is is turned off/on the radio modem subsystem
- * is expected return to an initialized state. For instance,
- * any voice and data calls will be terminated and all associated
- * lists emptied.
- *
- * "data" is int *
- * ((int *)data)[0] is > 0 for "Radio On"
- * ((int *)data)[0] is == 0 for "Radio Off"
- *
- * "response" is NULL
- *
- * Turn radio on if "on" > 0
- * Turn radio off if "on" == 0
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_RADIO_POWER 23
-
-/**
- * RIL_REQUEST_DTMF
- *
- * Send a DTMF tone
- *
- * If the implementation is currently playing a tone requested via
- * RIL_REQUEST_DTMF_START, that tone should be cancelled and the new tone
- * should be played instead
- *
- * "data" is a char * containing a single character with one of 12 values: 0-9,*,#
- * "response" is NULL
- *
- * FIXME should this block/mute microphone?
- * How does this interact with local DTMF feedback?
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_DTMF_STOP, RIL_REQUEST_DTMF_START
- *
- */
-#define RIL_REQUEST_DTMF 24
-
-/**
- * RIL_REQUEST_SEND_SMS
- *
- * Send an SMS message
- *
- * "data" is const char **
- * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed
- * by a length byte (as expected by TS 27.005) or NULL for default SMSC
- * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string
- * less the SMSC address
- * TP-Layer-Length is be "strlen(((const char **)data)[1])/2"
- *
- * "response" is a const RIL_SMS_Response *
- *
- * Based on the return error, caller decides to resend if sending sms
- * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
- * and GENERIC_FAILURE means no retry (i.e. error cause is 500)
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SMS_SEND_FAIL_RETRY
- * FDN_CHECK_FAILURE
- * GENERIC_FAILURE
- *
- * FIXME how do we specify TP-Message-Reference if we need to resend?
- */
-#define RIL_REQUEST_SEND_SMS 25
-
-
-/**
- * RIL_REQUEST_SEND_SMS_EXPECT_MORE
- *
- * Send an SMS message. Identical to RIL_REQUEST_SEND_SMS,
- * except that more messages are expected to be sent soon. If possible,
- * keep SMS relay protocol link open (eg TS 27.005 AT+CMMS command)
- *
- * "data" is const char **
- * ((const char **)data)[0] is SMSC address in GSM BCD format prefixed
- * by a length byte (as expected by TS 27.005) or NULL for default SMSC
- * ((const char **)data)[1] is SMS in PDU format as an ASCII hex string
- * less the SMSC address
- * TP-Layer-Length is be "strlen(((const char **)data)[1])/2"
- *
- * "response" is a const RIL_SMS_Response *
- *
- * Based on the return error, caller decides to resend if sending sms
- * fails. SMS_SEND_FAIL_RETRY means retry (i.e. error cause is 332)
- * and GENERIC_FAILURE means no retry (i.e. error cause is 500)
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SMS_SEND_FAIL_RETRY
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_SEND_SMS_EXPECT_MORE 26
-
-
-/**
- * RIL_REQUEST_SETUP_DATA_CALL
- *
- * Setup a packet data connection. If RIL_Data_Call_Response_v6.status
- * return success it is added to the list of data calls and a
- * RIL_UNSOL_DATA_CALL_LIST_CHANGED is sent. The call remains in the
- * list until RIL_REQUEST_DEACTIVATE_DATA_CALL is issued or the
- * radio is powered off/on. This list is returned by RIL_REQUEST_DATA_CALL_LIST
- * and RIL_UNSOL_DATA_CALL_LIST_CHANGED.
- *
- * The RIL is expected to:
- * - Create one data call context.
- * - Create and configure a dedicated interface for the context
- * - The interface must be point to point.
- * - The interface is configured with one or more addresses and
- * is capable of sending and receiving packets. The prefix length
- * of the addresses must be /32 for IPv4 and /128 for IPv6.
- * - Must NOT change the linux routing table.
- * - Support up to RIL_REQUEST_DATA_REGISTRATION_STATE response[5]
- * number of simultaneous data call contexts.
- *
- * "data" is a const char **
- * ((const char **)data)[0] Radio technology to use: 0-CDMA, 1-GSM/UMTS, 2...
- * for values above 2 this is RIL_RadioTechnology + 2.
- * ((const char **)data)[1] is a RIL_DataProfile (support is optional)
- * ((const char **)data)[2] is the APN to connect to if radio technology is GSM/UMTS. This APN will
- * override the one in the profile. NULL indicates no APN overrride.
- * ((const char **)data)[3] is the username for APN, or NULL
- * ((const char **)data)[4] is the password for APN, or NULL
- * ((const char **)data)[5] is the PAP / CHAP auth type. Values:
- * 0 => PAP and CHAP is never performed.
- * 1 => PAP may be performed; CHAP is never performed.
- * 2 => CHAP may be performed; PAP is never performed.
- * 3 => PAP / CHAP may be performed - baseband dependent.
- * ((const char **)data)[6] is the connection type to request must be one of the
- * PDP_type values in TS 27.007 section 10.1.1.
- * For example, "IP", "IPV6", "IPV4V6", or "PPP".
- * ((const char **)data)[7] Optional connection property parameters, format to be defined.
- *
- * "response" is a RIL_Data_Call_Response_v11
- *
- * FIXME may need way to configure QoS settings
- *
- * Valid errors:
- * SUCCESS should be returned on both success and failure of setup with
- * the RIL_Data_Call_Response_v6.status containing the actual status.
- * For all other errors the RIL_Data_Call_Resonse_v6 is ignored.
- *
- * Other errors could include:
- * RADIO_NOT_AVAILABLE, GENERIC_FAILURE, OP_NOT_ALLOWED_BEFORE_REG_TO_NW,
- * OP_NOT_ALLOWED_DURING_VOICE_CALL and REQUEST_NOT_SUPPORTED.
- *
- * See also: RIL_REQUEST_DEACTIVATE_DATA_CALL
- */
-#define RIL_REQUEST_SETUP_DATA_CALL 27
-
-
-/**
- * RIL_REQUEST_SIM_IO
- *
- * Request SIM I/O operation.
- * This is similar to the TS 27.007 "restricted SIM" operation
- * where it assumes all of the EF selection will be done by the
- * callee.
- *
- * "data" is a const RIL_SIM_IO_v6 *
- * Please note that RIL_SIM_IO has a "PIN2" field which may be NULL,
- * or may specify a PIN2 for operations that require a PIN2 (eg
- * updating FDN records)
- *
- * "response" is a const RIL_SIM_IO_Response *
- *
- * Arguments and responses that are unused for certain
- * values of "command" should be ignored or set to NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- * SIM_PIN2
- * SIM_PUK2
- */
-#define RIL_REQUEST_SIM_IO 28
-
-/**
- * RIL_REQUEST_SEND_USSD
- *
- * Send a USSD message
- *
- * If a USSD session already exists, the message should be sent in the
- * context of that session. Otherwise, a new session should be created.
- *
- * The network reply should be reported via RIL_UNSOL_ON_USSD
- *
- * Only one USSD session may exist at a time, and the session is assumed
- * to exist until:
- * a) The android system invokes RIL_REQUEST_CANCEL_USSD
- * b) The implementation sends a RIL_UNSOL_ON_USSD with a type code
- * of "0" (USSD-Notify/no further action) or "2" (session terminated)
- *
- * "data" is a const char * containing the USSD request in UTF-8 format
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * FDN_CHECK_FAILURE
- * USSD_MODIFIED_TO_DIAL
- * USSD_MODIFIED_TO_SS
- * USSD_MODIFIED_TO_USSD
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_CANCEL_USSD, RIL_UNSOL_ON_USSD
- */
-
-#define RIL_REQUEST_SEND_USSD 29
-
-/**
- * RIL_REQUEST_CANCEL_USSD
- *
- * Cancel the current USSD session if one exists
- *
- * "data" is null
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_CANCEL_USSD 30
-
-/**
- * RIL_REQUEST_GET_CLIR
- *
- * Gets current CLIR status
- * "data" is NULL
- * "response" is int *
- * ((int *)data)[0] is "n" parameter from TS 27.007 7.7
- * ((int *)data)[1] is "m" parameter from TS 27.007 7.7
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_GET_CLIR 31
-
-/**
- * RIL_REQUEST_SET_CLIR
- *
- * "data" is int *
- * ((int *)data)[0] is "n" parameter from TS 27.007 7.7
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_CLIR 32
-
-/**
- * RIL_REQUEST_QUERY_CALL_FORWARD_STATUS
- *
- * "data" is const RIL_CallForwardInfo *
- *
- * "response" is const RIL_CallForwardInfo **
- * "response" points to an array of RIL_CallForwardInfo *'s, one for
- * each distinct registered phone number.
- *
- * For example, if data is forwarded to +18005551212 and voice is forwarded
- * to +18005559999, then two separate RIL_CallForwardInfo's should be returned
- *
- * If, however, both data and voice are forwarded to +18005551212, then
- * a single RIL_CallForwardInfo can be returned with the service class
- * set to "data + voice = 3")
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 33
-
-
-/**
- * RIL_REQUEST_SET_CALL_FORWARD
- *
- * Configure call forward rule
- *
- * "data" is const RIL_CallForwardInfo *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_CALL_FORWARD 34
-
-
-/**
- * RIL_REQUEST_QUERY_CALL_WAITING
- *
- * Query current call waiting state
- *
- * "data" is const int *
- * ((const int *)data)[0] is the TS 27.007 service class to query.
- * "response" is a const int *
- * ((const int *)response)[0] is 0 for "disabled" and 1 for "enabled"
- *
- * If ((const int *)response)[0] is = 1, then ((const int *)response)[1]
- * must follow, with the TS 27.007 service class bit vector of services
- * for which call waiting is enabled.
- *
- * For example, if ((const int *)response)[0] is 1 and
- * ((const int *)response)[1] is 3, then call waiting is enabled for data
- * and voice and disabled for everything else
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_QUERY_CALL_WAITING 35
-
-
-/**
- * RIL_REQUEST_SET_CALL_WAITING
- *
- * Configure current call waiting state
- *
- * "data" is const int *
- * ((const int *)data)[0] is 0 for "disabled" and 1 for "enabled"
- * ((const int *)data)[1] is the TS 27.007 service class bit vector of
- * services to modify
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_CALL_WAITING 36
-
-/**
- * RIL_REQUEST_SMS_ACKNOWLEDGE
- *
- * Acknowledge successful or failed receipt of SMS previously indicated
- * via RIL_UNSOL_RESPONSE_NEW_SMS
- *
- * "data" is int *
- * ((int *)data)[0] is 1 on successful receipt
- * (basically, AT+CNMA=1 from TS 27.005
- * is 0 on failed receipt
- * (basically, AT+CNMA=2 from TS 27.005)
- * ((int *)data)[1] if data[0] is 0, this contains the failure cause as defined
- * in TS 23.040, 9.2.3.22. Currently only 0xD3 (memory
- * capacity exceeded) and 0xFF (unspecified error) are
- * reported.
- *
- * "response" is NULL
- *
- * FIXME would like request that specified RP-ACK/RP-ERROR PDU
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SMS_ACKNOWLEDGE 37
-
-/**
- * RIL_REQUEST_GET_IMEI - DEPRECATED
- *
- * Get the device IMEI, including check digit
- *
- * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY
- * Valid when RadioState is not RADIO_STATE_UNAVAILABLE
- *
- * "data" is NULL
- * "response" is a const char * containing the IMEI
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_GET_IMEI 38
-
-/**
- * RIL_REQUEST_GET_IMEISV - DEPRECATED
- *
- * Get the device IMEISV, which should be two decimal digits
- *
- * The request is DEPRECATED, use RIL_REQUEST_DEVICE_IDENTITY
- * Valid when RadioState is not RADIO_STATE_UNAVAILABLE
- *
- * "data" is NULL
- * "response" is a const char * containing the IMEISV
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_GET_IMEISV 39
-
-
-/**
- * RIL_REQUEST_ANSWER
- *
- * Answer incoming call
- *
- * Will not be called for WAITING calls.
- * RIL_REQUEST_SWITCH_WAITING_OR_HOLDING_AND_ACTIVE will be used in this case
- * instead
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_ANSWER 40
-
-/**
- * RIL_REQUEST_DEACTIVATE_DATA_CALL
- *
- * Deactivate packet data connection and remove from the
- * data call list if SUCCESS is returned. Any other return
- * values should also try to remove the call from the list,
- * but that may not be possible. In any event a
- * RIL_REQUEST_RADIO_POWER off/on must clear the list. An
- * RIL_UNSOL_DATA_CALL_LIST_CHANGED is not expected to be
- * issued because of an RIL_REQUEST_DEACTIVATE_DATA_CALL.
- *
- * "data" is const char **
- * ((char**)data)[0] indicating CID
- * ((char**)data)[1] indicating Disconnect Reason
- * 0 => No specific reason specified
- * 1 => Radio shutdown requested
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_SETUP_DATA_CALL
- */
-#define RIL_REQUEST_DEACTIVATE_DATA_CALL 41
-
-/**
- * RIL_REQUEST_QUERY_FACILITY_LOCK
- *
- * Query the status of a facility lock state
- *
- * "data" is const char **
- * ((const char **)data)[0] is the facility string code from TS 27.007 7.4
- * (eg "AO" for BAOC, "SC" for SIM lock)
- * ((const char **)data)[1] is the password, or "" if not required
- * ((const char **)data)[2] is the TS 27.007 service class bit vector of
- * services to query
- * ((const char **)data)[3] is AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- * This is only applicable in the case of Fixed Dialing Numbers
- * (FDN) requests.
- *
- * "response" is an int *
- * ((const int *)response) 0 is the TS 27.007 service class bit vector of
- * services for which the specified barring facility
- * is active. "0" means "disabled for all"
- *
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_QUERY_FACILITY_LOCK 42
-
-/**
- * RIL_REQUEST_SET_FACILITY_LOCK
- *
- * Enable/disable one facility lock
- *
- * "data" is const char **
- *
- * ((const char **)data)[0] = facility string code from TS 27.007 7.4
- * (eg "AO" for BAOC)
- * ((const char **)data)[1] = "0" for "unlock" and "1" for "lock"
- * ((const char **)data)[2] = password
- * ((const char **)data)[3] = string representation of decimal TS 27.007
- * service class bit vector. Eg, the string
- * "1" means "set this facility for voice services"
- * ((const char **)data)[4] = AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value.
- * This is only applicable in the case of Fixed Dialing Numbers
- * (FDN) requests.
- *
- * "response" is int *
- * ((int *)response)[0] is the number of retries remaining, or -1 if unknown
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_SET_FACILITY_LOCK 43
-
-/**
- * RIL_REQUEST_CHANGE_BARRING_PASSWORD
- *
- * Change call barring facility password
- *
- * "data" is const char **
- *
- * ((const char **)data)[0] = facility string code from TS 27.007 7.4
- * (eg "AO" for BAOC)
- * ((const char **)data)[1] = old password
- * ((const char **)data)[2] = new password
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CHANGE_BARRING_PASSWORD 44
-
-/**
- * RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE
- *
- * Query current network selectin mode
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((const int *)response)[0] is
- * 0 for automatic selection
- * 1 for manual selection
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_QUERY_NETWORK_SELECTION_MODE 45
-
-/**
- * RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC
- *
- * Specify that the network should be selected automatically
- *
- * "data" is NULL
- * "response" is NULL
- *
- * This request must not respond until the new operator is selected
- * and registered
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * ILLEGAL_SIM_OR_ME
- * GENERIC_FAILURE
- *
- * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and
- * no retries needed, such as illegal SIM or ME.
- * Returns GENERIC_FAILURE for all other causes that might be
- * fixed by retries.
- *
- */
-#define RIL_REQUEST_SET_NETWORK_SELECTION_AUTOMATIC 46
-
-/**
- * RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL
- *
- * Manually select a specified network.
- *
- * "data" is const char * specifying MCCMNC of network to select (eg "310170")
- * "response" is NULL
- *
- * This request must not respond until the new operator is selected
- * and registered
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * ILLEGAL_SIM_OR_ME
- * GENERIC_FAILURE
- *
- * Note: Returns ILLEGAL_SIM_OR_ME when the failure is permanent and
- * no retries needed, such as illegal SIM or ME.
- * Returns GENERIC_FAILURE for all other causes that might be
- * fixed by retries.
- *
- */
-#define RIL_REQUEST_SET_NETWORK_SELECTION_MANUAL 47
-
-/**
- * RIL_REQUEST_QUERY_AVAILABLE_NETWORKS
- *
- * Scans for available networks
- *
- * "data" is NULL
- * "response" is const char ** that should be an array of n*4 strings, where
- * n is the number of available networks
- * For each available network:
- *
- * ((const char **)response)[n+0] is long alpha ONS or EONS
- * ((const char **)response)[n+1] is short alpha ONS or EONS
- * ((const char **)response)[n+2] is 5 or 6 digit numeric code (MCC + MNC)
- * ((const char **)response)[n+3] is a string value of the status:
- * "unknown"
- * "available"
- * "current"
- * "forbidden"
- *
- * This request must not respond until the new operator is selected
- * and registered
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_QUERY_AVAILABLE_NETWORKS 48
-
-/**
- * RIL_REQUEST_DTMF_START
- *
- * Start playing a DTMF tone. Continue playing DTMF tone until
- * RIL_REQUEST_DTMF_STOP is received
- *
- * If a RIL_REQUEST_DTMF_START is received while a tone is currently playing,
- * it should cancel the previous tone and play the new one.
- *
- * "data" is a char *
- * ((char *)data)[0] is a single character with one of 12 values: 0-9,*,#
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_STOP
- */
-#define RIL_REQUEST_DTMF_START 49
-
-/**
- * RIL_REQUEST_DTMF_STOP
- *
- * Stop playing a currently playing DTMF tone.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_DTMF, RIL_REQUEST_DTMF_START
- */
-#define RIL_REQUEST_DTMF_STOP 50
-
-/**
- * RIL_REQUEST_BASEBAND_VERSION
- *
- * Return string value indicating baseband version, eg
- * response from AT+CGMR
- *
- * "data" is NULL
- * "response" is const char * containing version string for log reporting
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_BASEBAND_VERSION 51
-
-/**
- * RIL_REQUEST_SEPARATE_CONNECTION
- *
- * Separate a party from a multiparty call placing the multiparty call
- * (less the specified party) on hold and leaving the specified party
- * as the only other member of the current (active) call
- *
- * Like AT+CHLD=2x
- *
- * See TS 22.084 1.3.8.2 (iii)
- * TS 22.030 6.5.5 "Entering "2X followed by send"
- * TS 27.007 "AT+CHLD=2x"
- *
- * "data" is an int *
- * (int *)data)[0] contains Connection index (value of 'x' in CHLD above) "response" is NULL
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SEPARATE_CONNECTION 52
-
-
-/**
- * RIL_REQUEST_SET_MUTE
- *
- * Turn on or off uplink (microphone) mute.
- *
- * Will only be sent while voice call is active.
- * Will always be reset to "disable mute" when a new voice call is initiated
- *
- * "data" is an int *
- * (int *)data)[0] is 1 for "enable mute" and 0 for "disable mute"
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_SET_MUTE 53
-
-/**
- * RIL_REQUEST_GET_MUTE
- *
- * Queries the current state of the uplink mute setting
- *
- * "data" is NULL
- * "response" is an int *
- * (int *)response)[0] is 1 for "mute enabled" and 0 for "mute disabled"
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * SS_MODIFIED_TO_DIAL
- * SS_MODIFIED_TO_USSD
- * SS_MODIFIED_TO_SS
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_GET_MUTE 54
-
-/**
- * RIL_REQUEST_QUERY_CLIP
- *
- * Queries the status of the CLIP supplementary service
- *
- * (for MMI code "*#30#")
- *
- * "data" is NULL
- * "response" is an int *
- * (int *)response)[0] is 1 for "CLIP provisioned"
- * and 0 for "CLIP not provisioned"
- * and 2 for "unknown, e.g. no network etc"
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-
-#define RIL_REQUEST_QUERY_CLIP 55
-
-/**
- * RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE - Deprecated use the status
- * field in RIL_Data_Call_Response_v6.
- *
- * Requests the failure cause code for the most recently failed PDP
- * context or CDMA data connection active
- * replaces RIL_REQUEST_LAST_PDP_FAIL_CAUSE
- *
- * "data" is NULL
- *
- * "response" is a "int *"
- * ((int *)response)[0] is an integer cause code defined in TS 24.008
- * section 6.1.3.1.3 or close approximation
- *
- * If the implementation does not have access to the exact cause codes,
- * then it should return one of the values listed in
- * RIL_DataCallFailCause, as the UI layer needs to distinguish these
- * cases for error notification
- * and potential retries.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_LAST_CALL_FAIL_CAUSE
- *
- * Deprecated use the status field in RIL_Data_Call_Response_v6.
- */
-
-#define RIL_REQUEST_LAST_DATA_CALL_FAIL_CAUSE 56
-
-/**
- * RIL_REQUEST_DATA_CALL_LIST
- *
- * Returns the data call list. An entry is added when a
- * RIL_REQUEST_SETUP_DATA_CALL is issued and removed on a
- * RIL_REQUEST_DEACTIVATE_DATA_CALL. The list is emptied
- * when RIL_REQUEST_RADIO_POWER off/on is issued.
- *
- * "data" is NULL
- * "response" is an array of RIL_Data_Call_Response_v6
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- *
- * See also: RIL_UNSOL_DATA_CALL_LIST_CHANGED
- */
-
-#define RIL_REQUEST_DATA_CALL_LIST 57
-
-/**
- * RIL_REQUEST_RESET_RADIO - DEPRECATED
- *
- * Request a radio reset. The RIL implementation may postpone
- * the reset until after this request is responded to if the baseband
- * is presently busy.
- *
- * The request is DEPRECATED, use RIL_REQUEST_RADIO_POWER
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * REQUEST_NOT_SUPPORTED
- */
-
-#define RIL_REQUEST_RESET_RADIO 58
-
-/**
- * RIL_REQUEST_OEM_HOOK_RAW
- *
- * This request reserved for OEM-specific uses. It passes raw byte arrays
- * back and forth.
- *
- * It can be invoked on the Java side from
- * com.android.internal.telephony.Phone.invokeOemRilRequestRaw()
- *
- * "data" is a char * of bytes copied from the byte[] data argument in java
- * "response" is a char * of bytes that will returned via the
- * caller's "response" Message here:
- * (byte[])(((AsyncResult)response.obj).result)
- *
- * An error response here will result in
- * (((AsyncResult)response.obj).result) == null and
- * (((AsyncResult)response.obj).exception) being an instance of
- * com.android.internal.telephony.gsm.CommandException
- *
- * Valid errors:
- * All
- */
-
-#define RIL_REQUEST_OEM_HOOK_RAW 59
-
-/**
- * RIL_REQUEST_OEM_HOOK_STRINGS
- *
- * This request reserved for OEM-specific uses. It passes strings
- * back and forth.
- *
- * It can be invoked on the Java side from
- * com.android.internal.telephony.Phone.invokeOemRilRequestStrings()
- *
- * "data" is a const char **, representing an array of null-terminated UTF-8
- * strings copied from the "String[] strings" argument to
- * invokeOemRilRequestStrings()
- *
- * "response" is a const char **, representing an array of null-terminated UTF-8
- * stings that will be returned via the caller's response message here:
- *
- * (String[])(((AsyncResult)response.obj).result)
- *
- * An error response here will result in
- * (((AsyncResult)response.obj).result) == null and
- * (((AsyncResult)response.obj).exception) being an instance of
- * com.android.internal.telephony.gsm.CommandException
- *
- * Valid errors:
- * All
- */
-
-#define RIL_REQUEST_OEM_HOOK_STRINGS 60
-
-/**
- * RIL_REQUEST_SCREEN_STATE
- *
- * Indicates the current state of the screen. When the screen is off, the
- * RIL should notify the baseband to suppress certain notifications (eg,
- * signal strength and changes in LAC/CID or BID/SID/NID/latitude/longitude)
- * in an effort to conserve power. These notifications should resume when the
- * screen is on.
- *
- * "data" is int *
- * ((int *)data)[0] is == 1 for "Screen On"
- * ((int *)data)[0] is == 0 for "Screen Off"
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SCREEN_STATE 61
-
-
-/**
- * RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION
- *
- * Enables/disables supplementary service related notifications
- * from the network.
- *
- * Notifications are reported via RIL_UNSOL_SUPP_SVC_NOTIFICATION.
- *
- * "data" is int *
- * ((int *)data)[0] is == 1 for notifications enabled
- * ((int *)data)[0] is == 0 for notifications disabled
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_UNSOL_SUPP_SVC_NOTIFICATION.
- */
-#define RIL_REQUEST_SET_SUPP_SVC_NOTIFICATION 62
-
-/**
- * RIL_REQUEST_WRITE_SMS_TO_SIM
- *
- * Stores a SMS message to SIM memory.
- *
- * "data" is RIL_SMS_WriteArgs *
- *
- * "response" is int *
- * ((const int *)response)[0] is the record index where the message is stored.
- *
- * Valid errors:
- * SUCCESS
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_WRITE_SMS_TO_SIM 63
-
-/**
- * RIL_REQUEST_DELETE_SMS_ON_SIM
- *
- * Deletes a SMS message from SIM memory.
- *
- * "data" is int *
- * ((int *)data)[0] is the record index of the message to delete.
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_DELETE_SMS_ON_SIM 64
-
-/**
- * RIL_REQUEST_SET_BAND_MODE
- *
- * Assign a specified band for RF configuration.
- *
- * "data" is int *
- * ((int *)data)[0] is == 0 for "unspecified" (selected by baseband automatically)
- * ((int *)data)[0] is == 1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000)
- * ((int *)data)[0] is == 2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900)
- * ((int *)data)[0] is == 3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000)
- * ((int *)data)[0] is == 4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000)
- * ((int *)data)[0] is == 5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850)
- * ((int *)data)[0] is == 6 for "Cellular (800-MHz Band)"
- * ((int *)data)[0] is == 7 for "PCS (1900-MHz Band)"
- * ((int *)data)[0] is == 8 for "Band Class 3 (JTACS Band)"
- * ((int *)data)[0] is == 9 for "Band Class 4 (Korean PCS Band)"
- * ((int *)data)[0] is == 10 for "Band Class 5 (450-MHz Band)"
- * ((int *)data)[0] is == 11 for "Band Class 6 (2-GMHz IMT2000 Band)"
- * ((int *)data)[0] is == 12 for "Band Class 7 (Upper 700-MHz Band)"
- * ((int *)data)[0] is == 13 for "Band Class 8 (1800-MHz Band)"
- * ((int *)data)[0] is == 14 for "Band Class 9 (900-MHz Band)"
- * ((int *)data)[0] is == 15 for "Band Class 10 (Secondary 800-MHz Band)"
- * ((int *)data)[0] is == 16 for "Band Class 11 (400-MHz European PAMR Band)"
- * ((int *)data)[0] is == 17 for "Band Class 15 (AWS Band)"
- * ((int *)data)[0] is == 18 for "Band Class 16 (US 2.5-GHz Band)"
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_BAND_MODE 65
-
-/**
- * RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE
- *
- * Query the list of band mode supported by RF.
- *
- * "data" is NULL
- *
- * "response" is int *
- * "response" points to an array of int's, the int[0] is the size of array, reset is one for
- * each available band mode.
- *
- * 0 for "unspecified" (selected by baseband automatically)
- * 1 for "EURO band" (GSM-900 / DCS-1800 / WCDMA-IMT-2000)
- * 2 for "US band" (GSM-850 / PCS-1900 / WCDMA-850 / WCDMA-PCS-1900)
- * 3 for "JPN band" (WCDMA-800 / WCDMA-IMT-2000)
- * 4 for "AUS band" (GSM-900 / DCS-1800 / WCDMA-850 / WCDMA-IMT-2000)
- * 5 for "AUS band 2" (GSM-900 / DCS-1800 / WCDMA-850)
- * 6 for "Cellular (800-MHz Band)"
- * 7 for "PCS (1900-MHz Band)"
- * 8 for "Band Class 3 (JTACS Band)"
- * 9 for "Band Class 4 (Korean PCS Band)"
- * 10 for "Band Class 5 (450-MHz Band)"
- * 11 for "Band Class 6 (2-GMHz IMT2000 Band)"
- * 12 for "Band Class 7 (Upper 700-MHz Band)"
- * 13 for "Band Class 8 (1800-MHz Band)"
- * 14 for "Band Class 9 (900-MHz Band)"
- * 15 for "Band Class 10 (Secondary 800-MHz Band)"
- * 16 for "Band Class 11 (400-MHz European PAMR Band)"
- * 17 for "Band Class 15 (AWS Band)"
- * 18 for "Band Class 16 (US 2.5-GHz Band)"
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_SET_BAND_MODE
- */
-#define RIL_REQUEST_QUERY_AVAILABLE_BAND_MODE 66
-
-/**
- * RIL_REQUEST_STK_GET_PROFILE
- *
- * Requests the profile of SIM tool kit.
- * The profile indicates the SAT/USAT features supported by ME.
- * The SAT/USAT features refer to 3GPP TS 11.14 and 3GPP TS 31.111
- *
- * "data" is NULL
- *
- * "response" is a const char * containing SAT/USAT profile
- * in hexadecimal format string starting with first byte of terminal profile
- *
- * Valid errors:
- * RIL_E_SUCCESS
- * RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- * RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_GET_PROFILE 67
-
-/**
- * RIL_REQUEST_STK_SET_PROFILE
- *
- * Download the STK terminal profile as part of SIM initialization
- * procedure
- *
- * "data" is a const char * containing SAT/USAT profile
- * in hexadecimal format string starting with first byte of terminal profile
- *
- * "response" is NULL
- *
- * Valid errors:
- * RIL_E_SUCCESS
- * RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- * RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_SET_PROFILE 68
-
-/**
- * RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND
- *
- * Requests to send a SAT/USAT envelope command to SIM.
- * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111
- *
- * "data" is a const char * containing SAT/USAT command
- * in hexadecimal format string starting with command tag
- *
- * "response" is a const char * containing SAT/USAT response
- * in hexadecimal format string starting with first byte of response
- * (May be NULL)
- *
- * Valid errors:
- * RIL_E_SUCCESS
- * RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- * RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND 69
-
-/**
- * RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE
- *
- * Requests to send a terminal response to SIM for a received
- * proactive command
- *
- * "data" is a const char * containing SAT/USAT response
- * in hexadecimal format string starting with first byte of response data
- *
- * "response" is NULL
- *
- * Valid errors:
- * RIL_E_SUCCESS
- * RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- * RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_SEND_TERMINAL_RESPONSE 70
-
-/**
- * RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM
- *
- * When STK application gets RIL_UNSOL_STK_CALL_SETUP, the call actually has
- * been initialized by ME already. (We could see the call has been in the 'call
- * list') So, STK application needs to accept/reject the call according as user
- * operations.
- *
- * "data" is int *
- * ((int *)data)[0] is > 0 for "accept" the call setup
- * ((int *)data)[0] is == 0 for "reject" the call setup
- *
- * "response" is NULL
- *
- * Valid errors:
- * RIL_E_SUCCESS
- * RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- * RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_HANDLE_CALL_SETUP_REQUESTED_FROM_SIM 71
-
-/**
- * RIL_REQUEST_EXPLICIT_CALL_TRANSFER
- *
- * Connects the two calls and disconnects the subscriber from both calls.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_EXPLICIT_CALL_TRANSFER 72
-
-/**
- * RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE
- *
- * Requests to set the preferred network type for searching and registering
- * (CS/PS domain, RAT, and operation mode)
- *
- * "data" is int * which is RIL_PreferredNetworkType
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * MODE_NOT_SUPPORTED
- */
-#define RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE 73
-
-/**
- * RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE
- *
- * Query the preferred network type (CS/PS domain, RAT, and operation mode)
- * for searching and registering
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)reponse)[0] is == RIL_PreferredNetworkType
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_SET_PREFERRED_NETWORK_TYPE
- */
-#define RIL_REQUEST_GET_PREFERRED_NETWORK_TYPE 74
-
-/**
- * RIL_REQUEST_NEIGHBORING_CELL_IDS
- *
- * Request neighboring cell id in GSM network
- *
- * "data" is NULL
- * "response" must be a " const RIL_NeighboringCell** "
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_GET_NEIGHBORING_CELL_IDS 75
-
-/**
- * RIL_REQUEST_SET_LOCATION_UPDATES
- *
- * Enables/disables network state change notifications due to changes in
- * LAC and/or CID (for GSM) or BID/SID/NID/latitude/longitude (for CDMA).
- * Basically +CREG=2 vs. +CREG=1 (TS 27.007).
- *
- * Note: The RIL implementation should default to "updates enabled"
- * when the screen is on and "updates disabled" when the screen is off.
- *
- * "data" is int *
- * ((int *)data)[0] is == 1 for updates enabled (+CREG=2)
- * ((int *)data)[0] is == 0 for updates disabled (+CREG=1)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_REQUEST_SCREEN_STATE, RIL_UNSOL_RESPONSE_NETWORK_STATE_CHANGED
- */
-#define RIL_REQUEST_SET_LOCATION_UPDATES 76
-
-/**
- * RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE
- *
- * Request to set the location where the CDMA subscription shall
- * be retrieved
- *
- * "data" is int *
- * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- * SIM_ABSENT
- * SUBSCRIPTION_NOT_AVAILABLE
- *
- * See also: RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE
- */
-#define RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE 77
-
-/**
- * RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE
- *
- * Request to set the roaming preferences in CDMA
- *
- * "data" is int *
- * ((int *)data)[0] is == 0 for Home Networks only, as defined in PRL
- * ((int *)data)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL
- * ((int *)data)[0] is == 2 for Roaming on Any Network, as defined in the PRL
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_CDMA_SET_ROAMING_PREFERENCE 78
-
-/**
- * RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE
- *
- * Request the actual setting of the roaming preferences in CDMA in the modem
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)response)[0] is == 0 for Home Networks only, as defined in PRL
- * ((int *)response)[0] is == 1 for Roaming on Affiliated networks, as defined in PRL
- * ((int *)response)[0] is == 2 for Roaming on Any Network, as defined in the PRL
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_CDMA_QUERY_ROAMING_PREFERENCE 79
-
-/**
- * RIL_REQUEST_SET_TTY_MODE
- *
- * Request to set the TTY mode
- *
- * "data" is int *
- * ((int *)data)[0] is == 0 for TTY off
- * ((int *)data)[0] is == 1 for TTY Full
- * ((int *)data)[0] is == 2 for TTY HCO (hearing carryover)
- * ((int *)data)[0] is == 3 for TTY VCO (voice carryover)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_TTY_MODE 80
-
-/**
- * RIL_REQUEST_QUERY_TTY_MODE
- *
- * Request the setting of TTY mode
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)response)[0] is == 0 for TTY off
- * ((int *)response)[0] is == 1 for TTY Full
- * ((int *)response)[0] is == 2 for TTY HCO (hearing carryover)
- * ((int *)response)[0] is == 3 for TTY VCO (voice carryover)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_QUERY_TTY_MODE 81
-
-/**
- * RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE
- *
- * Request to set the preferred voice privacy mode used in voice
- * scrambling
- *
- * "data" is int *
- * ((int *)data)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask)
- * ((int *)data)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_CDMA_SET_PREFERRED_VOICE_PRIVACY_MODE 82
-
-/**
- * RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE
- *
- * Request the setting of preferred voice privacy mode
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)response)[0] is == 0 for Standard Privacy Mode (Public Long Code Mask)
- * ((int *)response)[0] is == 1 for Enhanced Privacy Mode (Private Long Code Mask)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_CDMA_QUERY_PREFERRED_VOICE_PRIVACY_MODE 83
-
-/**
- * RIL_REQUEST_CDMA_FLASH
- *
- * Send FLASH
- *
- * "data" is const char *
- * ((const char *)data)[0] is a FLASH string
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_FLASH 84
-
-/**
- * RIL_REQUEST_CDMA_BURST_DTMF
- *
- * Send DTMF string
- *
- * "data" is const char **
- * ((const char **)data)[0] is a DTMF string
- * ((const char **)data)[1] is the DTMF ON length in milliseconds, or 0 to use
- * default
- * ((const char **)data)[2] is the DTMF OFF length in milliseconds, or 0 to use
- * default
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_BURST_DTMF 85
-
-/**
- * RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY
- *
- * Takes a 26 digit string (20 digit AKEY + 6 digit checksum).
- * If the checksum is valid the 20 digit AKEY is written to NV,
- * replacing the existing AKEY no matter what it was before.
- *
- * "data" is const char *
- * ((const char *)data)[0] is a 26 digit string (ASCII digits '0'-'9')
- * where the last 6 digits are a checksum of the
- * first 20, as specified in TR45.AHAG
- * "Common Cryptographic Algorithms, Revision D.1
- * Section 2.2"
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_VALIDATE_AND_WRITE_AKEY 86
-
-/**
- * RIL_REQUEST_CDMA_SEND_SMS
- *
- * Send a CDMA SMS message
- *
- * "data" is const RIL_CDMA_SMS_Message *
- *
- * "response" is a const RIL_SMS_Response *
- *
- * Based on the return error, caller decides to resend if sending sms
- * fails. The CDMA error class is derived as follows,
- * SUCCESS is error class 0 (no error)
- * SMS_SEND_FAIL_RETRY is error class 2 (temporary failure)
- * and GENERIC_FAILURE is error class 3 (permanent and no retry)
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SMS_SEND_FAIL_RETRY
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_SEND_SMS 87
-
-/**
- * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE
- *
- * Acknowledge the success or failure in the receipt of SMS
- * previously indicated via RIL_UNSOL_RESPONSE_CDMA_NEW_SMS
- *
- * "data" is const RIL_CDMA_SMS_Ack *
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE 88
-
-/**
- * RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG
- *
- * Request the setting of GSM/WCDMA Cell Broadcast SMS config.
- *
- * "data" is NULL
- *
- * "response" is a const RIL_GSM_BroadcastSmsConfigInfo **
- * "responselen" is count * sizeof (RIL_GSM_BroadcastSmsConfigInfo *)
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_GSM_GET_BROADCAST_SMS_CONFIG 89
-
-/**
- * RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG
- *
- * Set GSM/WCDMA Cell Broadcast SMS config
- *
- * "data" is a const RIL_GSM_BroadcastSmsConfigInfo **
- * "datalen" is count * sizeof(RIL_GSM_BroadcastSmsConfigInfo *)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_GSM_SET_BROADCAST_SMS_CONFIG 90
-
-/**
- * RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION
- *
-* Enable or disable the reception of GSM/WCDMA Cell Broadcast SMS
- *
- * "data" is const int *
- * (const int *)data[0] indicates to activate or turn off the
- * reception of GSM/WCDMA Cell Broadcast SMS, 0-1,
- * 0 - Activate, 1 - Turn off
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_GSM_SMS_BROADCAST_ACTIVATION 91
-
-/**
- * RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG
- *
- * Request the setting of CDMA Broadcast SMS config
- *
- * "data" is NULL
- *
- * "response" is a const RIL_CDMA_BroadcastSmsConfigInfo **
- * "responselen" is count * sizeof (RIL_CDMA_BroadcastSmsConfigInfo *)
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_GET_BROADCAST_SMS_CONFIG 92
-
-/**
- * RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG
- *
- * Set CDMA Broadcast SMS config
- *
- * "data" is an const RIL_CDMA_BroadcastSmsConfigInfo **
- * "datalen" is count * sizeof(const RIL_CDMA_BroadcastSmsConfigInfo *)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_SET_BROADCAST_SMS_CONFIG 93
-
-/**
- * RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION
- *
- * Enable or disable the reception of CDMA Broadcast SMS
- *
- * "data" is const int *
- * (const int *)data[0] indicates to activate or turn off the
- * reception of CDMA Broadcast SMS, 0-1,
- * 0 - Activate, 1 - Turn off
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_SMS_BROADCAST_ACTIVATION 94
-
-/**
- * RIL_REQUEST_CDMA_SUBSCRIPTION
- *
- * Request the device MDN / H_SID / H_NID.
- *
- * The request is only allowed when CDMA subscription is available. When CDMA
- * subscription is changed, application layer should re-issue the request to
- * update the subscription information.
- *
- * If a NULL value is returned for any of the device id, it means that error
- * accessing the device.
- *
- * "response" is const char **
- * ((const char **)response)[0] is MDN if CDMA subscription is available
- * ((const char **)response)[1] is a comma separated list of H_SID (Home SID) if
- * CDMA subscription is available, in decimal format
- * ((const char **)response)[2] is a comma separated list of H_NID (Home NID) if
- * CDMA subscription is available, in decimal format
- * ((const char **)response)[3] is MIN (10 digits, MIN2+MIN1) if CDMA subscription is available
- * ((const char **)response)[4] is PRL version if CDMA subscription is available
- *
- * Valid errors:
- * SUCCESS
- * RIL_E_SUBSCRIPTION_NOT_AVAILABLE
- */
-
-#define RIL_REQUEST_CDMA_SUBSCRIPTION 95
-
-/**
- * RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM
- *
- * Stores a CDMA SMS message to RUIM memory.
- *
- * "data" is RIL_CDMA_SMS_WriteArgs *
- *
- * "response" is int *
- * ((const int *)response)[0] is the record index where the message is stored.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_WRITE_SMS_TO_RUIM 96
-
-/**
- * RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM
- *
- * Deletes a CDMA SMS message from RUIM memory.
- *
- * "data" is int *
- * ((int *)data)[0] is the record index of the message to delete.
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_CDMA_DELETE_SMS_ON_RUIM 97
-
-/**
- * RIL_REQUEST_DEVICE_IDENTITY
- *
- * Request the device ESN / MEID / IMEI / IMEISV.
- *
- * The request is always allowed and contains GSM and CDMA device identity;
- * it substitutes the deprecated requests RIL_REQUEST_GET_IMEI and
- * RIL_REQUEST_GET_IMEISV.
- *
- * If a NULL value is returned for any of the device id, it means that error
- * accessing the device.
- *
- * When CDMA subscription is changed the ESN/MEID may change. The application
- * layer should re-issue the request to update the device identity in this case.
- *
- * "response" is const char **
- * ((const char **)response)[0] is IMEI if GSM subscription is available
- * ((const char **)response)[1] is IMEISV if GSM subscription is available
- * ((const char **)response)[2] is ESN if CDMA subscription is available
- * ((const char **)response)[3] is MEID if CDMA subscription is available
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_DEVICE_IDENTITY 98
-
-/**
- * RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE
- *
- * Request the radio's system selection module to exit emergency
- * callback mode. RIL will not respond with SUCCESS until the modem has
- * completely exited from Emergency Callback Mode.
- *
- * "data" is NULL
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_EXIT_EMERGENCY_CALLBACK_MODE 99
-
-/**
- * RIL_REQUEST_GET_SMSC_ADDRESS
- *
- * Queries the default Short Message Service Center address on the device.
- *
- * "data" is NULL
- *
- * "response" is const char * containing the SMSC address.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_GET_SMSC_ADDRESS 100
-
-/**
- * RIL_REQUEST_SET_SMSC_ADDRESS
- *
- * Sets the default Short Message Service Center address on the device.
- *
- * "data" is const char * containing the SMSC address.
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_SET_SMSC_ADDRESS 101
-
-/**
- * RIL_REQUEST_REPORT_SMS_MEMORY_STATUS
- *
- * Indicates whether there is storage available for new SMS messages.
- *
- * "data" is int *
- * ((int *)data)[0] is 1 if memory is available for storing new messages
- * is 0 if memory capacity is exceeded
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_REPORT_SMS_MEMORY_STATUS 102
-
-/**
- * RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING
- *
- * Indicates that the StkSerivce is running and is
- * ready to receive RIL_UNSOL_STK_XXXXX commands.
- *
- * "data" is NULL
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_REPORT_STK_SERVICE_IS_RUNNING 103
-
-/**
- * RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE
- *
- * Request to query the location where the CDMA subscription shall
- * be retrieved
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- * SUBSCRIPTION_NOT_AVAILABLE
- *
- * See also: RIL_REQUEST_CDMA_SET_SUBSCRIPTION_SOURCE
- */
-#define RIL_REQUEST_CDMA_GET_SUBSCRIPTION_SOURCE 104
-
-/**
- * RIL_REQUEST_ISIM_AUTHENTICATION
- *
- * Request the ISIM application on the UICC to perform AKA
- * challenge/response algorithm for IMS authentication
- *
- * "data" is a const char * containing the challenge string in Base64 format
- * "response" is a const char * containing the response in Base64 format
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_ISIM_AUTHENTICATION 105
-
-/**
- * RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU
- *
- * Acknowledge successful or failed receipt of SMS previously indicated
- * via RIL_UNSOL_RESPONSE_NEW_SMS, including acknowledgement TPDU to send
- * as the RP-User-Data element of the RP-ACK or RP-ERROR PDU.
- *
- * "data" is const char **
- * ((const char **)data)[0] is "1" on successful receipt (send RP-ACK)
- * is "0" on failed receipt (send RP-ERROR)
- * ((const char **)data)[1] is the acknowledgement TPDU in hexadecimal format
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_ACKNOWLEDGE_INCOMING_GSM_SMS_WITH_PDU 106
-
-/**
- * RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS
- *
- * Requests to send a SAT/USAT envelope command to SIM.
- * The SAT/USAT envelope command refers to 3GPP TS 11.14 and 3GPP TS 31.111.
- *
- * This request has one difference from RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND:
- * the SW1 and SW2 status bytes from the UICC response are returned along with
- * the response data, using the same structure as RIL_REQUEST_SIM_IO.
- *
- * The RIL implementation shall perform the normal processing of a '91XX'
- * response in SW1/SW2 to retrieve the pending proactive command and send it
- * as an unsolicited response, as RIL_REQUEST_STK_SEND_ENVELOPE_COMMAND does.
- *
- * "data" is a const char * containing the SAT/USAT command
- * in hexadecimal format starting with command tag
- *
- * "response" is a const RIL_SIM_IO_Response *
- *
- * Valid errors:
- * RIL_E_SUCCESS
- * RIL_E_RADIO_NOT_AVAILABLE (radio resetting)
- * RIL_E_GENERIC_FAILURE
- */
-#define RIL_REQUEST_STK_SEND_ENVELOPE_WITH_STATUS 107
-
-/**
- * RIL_REQUEST_VOICE_RADIO_TECH
- *
- * Query the radio technology type (3GPP/3GPP2) used for voice. Query is valid only
- * when radio state is RADIO_STATE_ON
- *
- * "data" is NULL
- * "response" is int *
- * ((int *) response)[0] is of type const RIL_RadioTechnology
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_VOICE_RADIO_TECH 108
-
-/**
- * RIL_REQUEST_GET_CELL_INFO_LIST
- *
- * Request all of the current cell information known to the radio. The radio
- * must a list of all current cells, including the neighboring cells. If for a particular
- * cell information isn't known then the appropriate unknown value will be returned.
- * This does not cause or change the rate of RIL_UNSOL_CELL_INFO_LIST.
- *
- * "data" is NULL
- *
- * "response" is an array of RIL_CellInfo.
- */
-#define RIL_REQUEST_GET_CELL_INFO_LIST 109
-
-/**
- * RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE
- *
- * Sets the minimum time between when RIL_UNSOL_CELL_INFO_LIST should be invoked.
- * A value of 0, means invoke RIL_UNSOL_CELL_INFO_LIST when any of the reported
- * information changes. Setting the value to INT_MAX(0x7fffffff) means never issue
- * a RIL_UNSOL_CELL_INFO_LIST.
- *
- * "data" is int *
- * ((int *)data)[0] is minimum time in milliseconds
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_UNSOL_CELL_INFO_LIST_RATE 110
-
-/**
- * RIL_REQUEST_SET_INITIAL_ATTACH_APN
- *
- * Set an apn to initial attach network
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * SUBSCRIPTION_NOT_AVAILABLE
- */
-#define RIL_REQUEST_SET_INITIAL_ATTACH_APN 111
-
-/**
- * RIL_REQUEST_IMS_REGISTRATION_STATE
- *
- * Request current IMS registration state
- *
- * "data" is NULL
- *
- * "response" is int *
- * ((int *)response)[0] is registration state:
- * 0 - Not registered
- * 1 - Registered
- *
- * If ((int*)response)[0] is = 1, then ((int *) response)[1]
- * must follow with IMS SMS format:
- *
- * ((int *) response)[1] is of type RIL_RadioTechnologyFamily
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_IMS_REGISTRATION_STATE 112
-
-/**
- * RIL_REQUEST_IMS_SEND_SMS
- *
- * Send a SMS message over IMS
- *
- * "data" is const RIL_IMS_SMS_Message *
- *
- * "response" is a const RIL_SMS_Response *
- *
- * Based on the return error, caller decides to resend if sending sms
- * fails. SMS_SEND_FAIL_RETRY means retry, and other errors means no retry.
- * In case of retry, data is encoded based on Voice Technology available.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * SMS_SEND_FAIL_RETRY
- * FDN_CHECK_FAILURE
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_IMS_SEND_SMS 113
-
-/**
- * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC
- *
- * Request APDU exchange on the basic channel. This command reflects TS 27.007
- * "generic SIM access" operation (+CSIM). The modem must ensure proper function
- * of GSM/CDMA, and filter commands appropriately. It should filter
- * channel management and SELECT by DF name commands.
- *
- * "data" is a const RIL_SIM_APDU *
- * "sessionid" field should be ignored.
- *
- * "response" is a const RIL_SIM_IO_Response *
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC 114
-
-/**
- * RIL_REQUEST_SIM_OPEN_CHANNEL
- *
- * Open a new logical channel and select the given application. This command
- * reflects TS 27.007 "open logical channel" operation (+CCHO).
- *
- * "data" is const char * and set to AID value, See ETSI 102.221 and 101.220.
- *
- * "response" is int *
- * ((int *)data)[0] contains the session id of the logical channel.
- * ((int *)data)[1] onwards may optionally contain the select response for the
- * open channel command with one byte per integer.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- * MISSING_RESOURCE
- * NO_SUCH_ELEMENT
- */
-#define RIL_REQUEST_SIM_OPEN_CHANNEL 115
-
-/**
- * RIL_REQUEST_SIM_CLOSE_CHANNEL
- *
- * Close a previously opened logical channel. This command reflects TS 27.007
- * "close logical channel" operation (+CCHC).
- *
- * "data" is int *
- * ((int *)data)[0] is the session id of logical the channel to close.
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SIM_CLOSE_CHANNEL 116
-
-/**
- * RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL
- *
- * Exchange APDUs with a UICC over a previously opened logical channel. This
- * command reflects TS 27.007 "generic logical channel access" operation
- * (+CGLA). The modem should filter channel management and SELECT by DF name
- * commands.
- *
- * "data" is a const RIL_SIM_APDU*
- *
- * "response" is a const RIL_SIM_IO_Response *
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL 117
-
-/**
- * RIL_REQUEST_NV_READ_ITEM
- *
- * Read one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h.
- * This is used for device configuration by some CDMA operators.
- *
- * "data" is a const RIL_NV_ReadItem *
- *
- * "response" is const char * containing the contents of the NV item
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_NV_READ_ITEM 118
-
-/**
- * RIL_REQUEST_NV_WRITE_ITEM
- *
- * Write one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h.
- * This is used for device configuration by some CDMA operators.
- *
- * "data" is a const RIL_NV_WriteItem *
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_NV_WRITE_ITEM 119
-
-/**
- * RIL_REQUEST_NV_WRITE_CDMA_PRL
- *
- * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage.
- * This is used for device configuration by some CDMA operators.
- *
- * "data" is a const char * containing the PRL as a byte array
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_NV_WRITE_CDMA_PRL 120
-
-/**
- * RIL_REQUEST_NV_RESET_CONFIG
- *
- * Reset the radio NV configuration to the factory state.
- * This is used for device configuration by some CDMA operators.
- *
- * "data" is int *
- * ((int *)data)[0] is 1 to reload all NV items
- * ((int *)data)[0] is 2 for erase NV reset (SCRTN)
- * ((int *)data)[0] is 3 for factory reset (RTN)
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_NV_RESET_CONFIG 121
-
- /** RIL_REQUEST_SET_UICC_SUBSCRIPTION
- * FIXME This API needs to have more documentation.
- *
- * Selection/de-selection of a subscription from a SIM card
- * "data" is const RIL_SelectUiccSub*
-
- *
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * SUBSCRIPTION_NOT_SUPPORTED
- *
- */
-#define RIL_REQUEST_SET_UICC_SUBSCRIPTION 122
-
-/**
- * RIL_REQUEST_ALLOW_DATA
- *
- * Tells the modem whether data calls are allowed or not
- *
- * "data" is int *
- * FIXME slotId and aid will be added.
- * ((int *)data)[0] is == 0 to allow data calls
- * ((int *)data)[0] is == 1 to disallow data calls
- *
- * "response" is NULL
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- *
- */
-#define RIL_REQUEST_ALLOW_DATA 123
-
-/**
- * RIL_REQUEST_GET_HARDWARE_CONFIG
- *
- * Request all of the current hardware (modem and sim) associated
- * with the RIL.
- *
- * "data" is NULL
- *
- * "response" is an array of RIL_HardwareConfig.
- */
-#define RIL_REQUEST_GET_HARDWARE_CONFIG 124
-
-/**
- * RIL_REQUEST_SIM_AUTHENTICATION
- *
- * Returns the response of SIM Authentication through RIL to a
- * challenge request.
- *
- * "data" Base64 encoded string containing challenge:
- * int authContext; P2 value of authentication command, see P2 parameter in
- * 3GPP TS 31.102 7.1.2
- * char *authData; the challenge string in Base64 format, see 3GPP
- * TS 31.102 7.1.2
- * char *aid; AID value, See ETSI 102.221 8.1 and 101.220 4,
- * NULL if no value
- *
- * "response" Base64 encoded strings containing response:
- * int sw1; Status bytes per 3GPP TS 31.102 section 7.3
- * int sw2;
- * char *simResponse; Response in Base64 format, see 3GPP TS 31.102 7.1.2
- */
-#define RIL_REQUEST_SIM_AUTHENTICATION 125
-
-/**
- * RIL_REQUEST_GET_DC_RT_INFO
- *
- * The request is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
- * Requests the Data Connection Real Time Info
- *
- * "data" is NULL
- *
- * "response" is the most recent RIL_DcRtInfo
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- *
- * See also: RIL_UNSOL_DC_RT_INFO_CHANGED
- */
-#define RIL_REQUEST_GET_DC_RT_INFO 126
-
-/**
- * RIL_REQUEST_SET_DC_RT_INFO_RATE
- *
- * The request is DEPRECATED
- * This is the minimum number of milliseconds between successive
- * RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate
- * at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of
- * 0 means send as fast as possible.
- *
- * "data" The number of milliseconds as an int
- *
- * "response" is null
- *
- * Valid errors:
- * SUCCESS must not fail
- */
-#define RIL_REQUEST_SET_DC_RT_INFO_RATE 127
-
-/**
- * RIL_REQUEST_SET_DATA_PROFILE
- *
- * Set data profile in modem
- * Modem should erase existed profiles from framework, and apply new profiles
- * "data" is an const RIL_DataProfileInfo **
- * "datalen" is count * sizeof(const RIL_DataProfileInfo *)
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- * SUBSCRIPTION_NOT_AVAILABLE
- */
-#define RIL_REQUEST_SET_DATA_PROFILE 128
-
-/**
- * RIL_REQUEST_SHUTDOWN
- *
- * Device is shutting down. All further commands are ignored
- * and RADIO_NOT_AVAILABLE must be returned.
- *
- * "data" is null
- * "response" is NULL
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SHUTDOWN 129
-
-/**
- * RIL_REQUEST_GET_RADIO_CAPABILITY
- *
- * Used to get phone radio capablility.
- *
- * "data" is the RIL_RadioCapability structure
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_GET_RADIO_CAPABILITY 130
-
-/**
- * RIL_REQUEST_SET_RADIO_CAPABILITY
- *
- * Used to set the phones radio capability. Be VERY careful
- * using this request as it may cause some vendor modems to reset. Because
- * of the possible modem reset any RIL commands after this one may not be
- * processed.
- *
- * "data" is the RIL_RadioCapability structure
- *
- * "response" is the RIL_RadioCapability structure, used to feedback return status
- *
- * Valid errors:
- * SUCCESS means a RIL_UNSOL_RADIO_CAPABILITY will be sent within 30 seconds.
- * RADIO_NOT_AVAILABLE
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_SET_RADIO_CAPABILITY 131
-
- /**
- * RIL_REQUEST_START_LCE
- *
- * Start Link Capacity Estimate (LCE) service if supported by the radio.
- *
- * "data" is const int *
- * ((const int*)data)[0] specifies the desired reporting interval (ms).
- * ((const int*)data)[1] specifies the LCE service mode. 1: PULL; 0: PUSH.
- *
- * "response" is the RIL_LceStatusInfo.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * LCE_NOT_SUPPORTED
- */
-#define RIL_REQUEST_START_LCE 132
-
-/**
- * RIL_REQUEST_STOP_LCE
- *
- * Stop Link Capacity Estimate (LCE) service, the STOP operation should be
- * idempotent for the radio modem.
- *
- * "response" is the RIL_LceStatusInfo.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * LCE_NOT_SUPPORTED
- */
-#define RIL_REQUEST_STOP_LCE 133
-
-/**
- * RIL_REQUEST_PULL_LCEDATA
- *
- * Pull LCE service for capacity information.
- *
- * "response" is the RIL_LceDataInfo.
- *
- * Valid errors:
- * SUCCESS
- * RADIO_NOT_AVAILABLE
- * LCE_NOT_SUPPORTED
- */
-#define RIL_REQUEST_PULL_LCEDATA 134
- /**
- * RIL_REQUEST_GET_ACTIVITY_INFO
- *
- * Get modem activity statisitics info.
- *
- * There can be multiple RIL_REQUEST_GET_ACTIVITY_INFO calls to modem.
- * Once the response for the request is sent modem will clear
- * current statistics information.
- *
- * "data" is null
- * "response" is const RIL_ActivityStatsInfo *
- *
- * Valid errors:
- *
- * SUCCESS
- * RADIO_NOT_AVAILABLE (radio resetting)
- * GENERIC_FAILURE
- */
-#define RIL_REQUEST_GET_ACTIVITY_INFO 135
-
-
-/* SAMSUNG REQUESTS */
-#undef RIL_REQUEST_SIM_OPEN_CHANNEL
-#undef RIL_REQUEST_SIM_CLOSE_CHANNEL
-
-#define RIL_REQUEST_GET_CELL_BROADCAST_CONFIG 10002
-
-#define RIL_REQUEST_SEND_ENCODED_USSD 10005
-#define RIL_REQUEST_SET_PDA_MEMORY_STATUS 10006
-#define RIL_REQUEST_GET_PHONEBOOK_STORAGE_INFO 10007
-#define RIL_REQUEST_GET_PHONEBOOK_ENTRY 10008
-#define RIL_REQUEST_ACCESS_PHONEBOOK_ENTRY 10009
-#define RIL_REQUEST_DIAL_VIDEO_CALL 10010
-#define RIL_REQUEST_CALL_DEFLECTION 10011
-#define RIL_REQUEST_READ_SMS_FROM_SIM 10012
-#define RIL_REQUEST_USIM_PB_CAPA 10013
-#define RIL_REQUEST_LOCK_INFO 10014
-
-#define RIL_REQUEST_DIAL_EMERGENCY 10016
-#define RIL_REQUEST_GET_STOREAD_MSG_COUNT 10017
-#define RIL_REQUEST_STK_SIM_INIT_EVENT 10018
-#define RIL_REQUEST_GET_LINE_ID 10019
-#define RIL_REQUEST_SET_LINE_ID 10020
-#define RIL_REQUEST_GET_SERIAL_NUMBER 10021
-#define RIL_REQUEST_GET_MANUFACTURE_DATE_NUMBER 10022
-#define RIL_REQUEST_GET_BARCODE_NUMBER 10023
-#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_BOOTSTRAP 10024
-#define RIL_REQUEST_UICC_GBA_AUTHENTICATE_NAF 10025
-#define RIL_REQUEST_SIM_TRANSMIT_BASIC 10026
-#define RIL_REQUEST_SIM_OPEN_CHANNEL 10027
-#define RIL_REQUEST_SIM_CLOSE_CHANNEL 10028
-#define RIL_REQUEST_SIM_TRANSMIT_CHANNEL 10029
-#define RIL_REQUEST_SIM_AUTH 10030
-#define RIL_REQUEST_PS_ATTACH 10031
-#define RIL_REQUEST_PS_DETACH 10032
-#define RIL_REQUEST_ACTIVATE_DATA_CALL 10033
-#define RIL_REQUEST_CHANGE_SIM_PERSO 10034
-#define RIL_REQUEST_ENTER_SIM_PERSO 10035
-#define RIL_REQUEST_GET_TIME_INFO 10036
-#define RIL_REQUEST_OMADM_SETUP_SESSION 10037
-#define RIL_REQUEST_OMADM_SERVER_START_SESSION 10038
-#define RIL_REQUEST_OMADM_CLIENT_START_SESSION 10039
-#define RIL_REQUEST_OMADM_SEND_DATA 10040
-#define RIL_REQUEST_CDMA_GET_DATAPROFILE 10041
-#define RIL_REQUEST_CDMA_SET_DATAPROFILE 10042
-#define RIL_REQUEST_CDMA_GET_SYSTEMPROPERTIES 10043
-#define RIL_REQUEST_CDMA_SET_SYSTEMPROPERTIES 10044
-#define RIL_REQUEST_SEND_SMS_COUNT 10045
-#define RIL_REQUEST_SEND_SMS_MSG 10046
-#define RIL_REQUEST_SEND_SMS_MSG_READ_STATUS 10047
-#define RIL_REQUEST_MODEM_HANGUP 10048
-#define RIL_REQUEST_SET_SIM_POWER 10049
-#define RIL_REQUEST_SET_PREFERRED_NETWORK_LIST 10050
-#define RIL_REQUEST_GET_PREFERRED_NETWORK_LIST 10051
-#define RIL_REQUEST_HANGUP_VT 10052
-
-
-/***********************************************************************/
-
-
-#define RIL_UNSOL_RESPONSE_BASE 1000
-
-/**
- * RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED
- *
- * Indicate when value of RIL_RadioState has changed.
- *
- * Callee will invoke RIL_RadioStateRequest method on main thread
- *
- * "data" is NULL
- */
-
-#define RIL_UNSOL_RESPONSE_RADIO_STATE_CHANGED 1000
-
-
-/**
- * RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED
- *
- * Indicate when call state has changed
- *
- * Callee will invoke RIL_REQUEST_GET_CURRENT_CALLS on main thread
- *
- * "data" is NULL
- *
- * Response should be invoked on, for example,
- * "RING", "BUSY", "NO CARRIER", and also call state
- * transitions (DIALING->ALERTING ALERTING->ACTIVE)
- *
- * Redundent or extraneous invocations are tolerated
- */
-#define RIL_UNSOL_RESPONSE_CALL_STATE_CHANGED 1001
-
-
-/**
- * RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED
- *
- * Called when the voice network state changed
- *
- * Callee will invoke the following requests on main thread:
- *
- * RIL_REQUEST_VOICE_REGISTRATION_STATE
- * RIL_REQUEST_OPERATOR
- *
- * "data" is NULL
- *
- * FIXME should this happen when SIM records are loaded? (eg, for
- * EONS)
- */
-#define RIL_UNSOL_RESPONSE_VOICE_NETWORK_STATE_CHANGED 1002
-
-/**
- * RIL_UNSOL_RESPONSE_NEW_SMS
- *
- * Called when new SMS is received.
- *
- * "data" is const char *
- * This is a pointer to a string containing the PDU of an SMS-DELIVER
- * as an ascii string of hex digits. The PDU starts with the SMSC address
- * per TS 27.005 (+CMT:)
- *
- * Callee will subsequently confirm the receipt of thei SMS with a
- * RIL_REQUEST_SMS_ACKNOWLEDGE
- *
- * No new RIL_UNSOL_RESPONSE_NEW_SMS
- * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a
- * RIL_REQUEST_SMS_ACKNOWLEDGE has been received
- */
-
-#define RIL_UNSOL_RESPONSE_NEW_SMS 1003
-
-/**
- * RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT
- *
- * Called when new SMS Status Report is received.
- *
- * "data" is const char *
- * This is a pointer to a string containing the PDU of an SMS-STATUS-REPORT
- * as an ascii string of hex digits. The PDU starts with the SMSC address
- * per TS 27.005 (+CDS:).
- *
- * Callee will subsequently confirm the receipt of the SMS with a
- * RIL_REQUEST_SMS_ACKNOWLEDGE
- *
- * No new RIL_UNSOL_RESPONSE_NEW_SMS
- * or RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT messages should be sent until a
- * RIL_REQUEST_SMS_ACKNOWLEDGE has been received
- */
-
-#define RIL_UNSOL_RESPONSE_NEW_SMS_STATUS_REPORT 1004
-
-/**
- * RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM
- *
- * Called when new SMS has been stored on SIM card
- *
- * "data" is const int *
- * ((const int *)data)[0] contains the slot index on the SIM that contains
- * the new message
- */
-
-#define RIL_UNSOL_RESPONSE_NEW_SMS_ON_SIM 1005
-
-/**
- * RIL_UNSOL_ON_USSD
- *
- * Called when a new USSD message is received.
- *
- * "data" is const char **
- * ((const char **)data)[0] points to a type code, which is
- * one of these string values:
- * "0" USSD-Notify -- text in ((const char **)data)[1]
- * "1" USSD-Request -- text in ((const char **)data)[1]
- * "2" Session terminated by network
- * "3" other local client (eg, SIM Toolkit) has responded
- * "4" Operation not supported
- * "5" Network timeout
- *
- * The USSD session is assumed to persist if the type code is "1", otherwise
- * the current session (if any) is assumed to have terminated.
- *
- * ((const char **)data)[1] points to a message string if applicable, which
- * should always be in UTF-8.
- */
-#define RIL_UNSOL_ON_USSD 1006
-/* Previously #define RIL_UNSOL_ON_USSD_NOTIFY 1006 */
-
-/**
- * RIL_UNSOL_ON_USSD_REQUEST
- *
- * Obsolete. Send via RIL_UNSOL_ON_USSD
- */
-#define RIL_UNSOL_ON_USSD_REQUEST 1007
-
-/**
- * RIL_UNSOL_NITZ_TIME_RECEIVED
- *
- * Called when radio has received a NITZ time message
- *
- * "data" is const char * pointing to NITZ time string
- * in the form "yy/mm/dd,hh:mm:ss(+/-)tz,dt"
- */
-#define RIL_UNSOL_NITZ_TIME_RECEIVED 1008
-
-/**
- * RIL_UNSOL_SIGNAL_STRENGTH
- *
- * Radio may report signal strength rather han have it polled.
- *
- * "data" is a const RIL_SignalStrength *
- */
-#define RIL_UNSOL_SIGNAL_STRENGTH 1009
-
-
-/**
- * RIL_UNSOL_DATA_CALL_LIST_CHANGED
- *
- * "data" is an array of RIL_Data_Call_Response_v6 identical to that
- * returned by RIL_REQUEST_DATA_CALL_LIST. It is the complete list
- * of current data contexts including new contexts that have been
- * activated. A data call is only removed from this list when the
- * framework sends a RIL_REQUEST_DEACTIVATE_DATA_CALL or the radio
- * is powered off/on.
- *
- * See also: RIL_REQUEST_DATA_CALL_LIST
- */
-
-#define RIL_UNSOL_DATA_CALL_LIST_CHANGED 1010
-
-/**
- * RIL_UNSOL_SUPP_SVC_NOTIFICATION
- *
- * Reports supplementary service related notification from the network.
- *
- * "data" is a const RIL_SuppSvcNotification *
- *
- */
-
-#define RIL_UNSOL_SUPP_SVC_NOTIFICATION 1011
-
-/**
- * RIL_UNSOL_STK_SESSION_END
- *
- * Indicate when STK session is terminated by SIM.
- *
- * "data" is NULL
- */
-#define RIL_UNSOL_STK_SESSION_END 1012
-
-/**
- * RIL_UNSOL_STK_PROACTIVE_COMMAND
- *
- * Indicate when SIM issue a STK proactive command to applications
- *
- * "data" is a const char * containing SAT/USAT proactive command
- * in hexadecimal format string starting with command tag
- *
- */
-#define RIL_UNSOL_STK_PROACTIVE_COMMAND 1013
-
-/**
- * RIL_UNSOL_STK_EVENT_NOTIFY
- *
- * Indicate when SIM notifies applcations some event happens.
- * Generally, application does not need to have any feedback to
- * SIM but shall be able to indicate appropriate messages to users.
- *
- * "data" is a const char * containing SAT/USAT commands or responses
- * sent by ME to SIM or commands handled by ME, in hexadecimal format string
- * starting with first byte of response data or command tag
- *
- */
-#define RIL_UNSOL_STK_EVENT_NOTIFY 1014
-
-/**
- * RIL_UNSOL_STK_CALL_SETUP
- *
- * Indicate when SIM wants application to setup a voice call.
- *
- * "data" is const int *
- * ((const int *)data)[0] contains timeout value (in milliseconds)
- */
-#define RIL_UNSOL_STK_CALL_SETUP 1015
-
-/**
- * RIL_UNSOL_SIM_SMS_STORAGE_FULL
- *
- * Indicates that SMS storage on the SIM is full. Sent when the network
- * attempts to deliver a new SMS message. Messages cannot be saved on the
- * SIM until space is freed. In particular, incoming Class 2 messages
- * cannot be stored.
- *
- * "data" is null
- *
- */
-#define RIL_UNSOL_SIM_SMS_STORAGE_FULL 1016
-
-/**
- * RIL_UNSOL_SIM_REFRESH
- *
- * Indicates that file(s) on the SIM have been updated, or the SIM
- * has been reinitialized.
- *
- * In the case where RIL is version 6 or older:
- * "data" is an int *
- * ((int *)data)[0] is a RIL_SimRefreshResult.
- * ((int *)data)[1] is the EFID of the updated file if the result is
- * SIM_FILE_UPDATE or NULL for any other result.
- *
- * In the case where RIL is version 7:
- * "data" is a RIL_SimRefreshResponse_v7 *
- *
- * Note: If the SIM state changes as a result of the SIM refresh (eg,
- * SIM_READY -> SIM_LOCKED_OR_ABSENT), RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED
- * should be sent.
- */
-#define RIL_UNSOL_SIM_REFRESH 1017
-
-/**
- * RIL_UNSOL_CALL_RING
- *
- * Ring indication for an incoming call (eg, RING or CRING event).
- * There must be at least one RIL_UNSOL_CALL_RING at the beginning
- * of a call and sending multiple is optional. If the system property
- * ro.telephony.call_ring.multiple is false then the upper layers
- * will generate the multiple events internally. Otherwise the vendor
- * ril must generate multiple RIL_UNSOL_CALL_RING if
- * ro.telephony.call_ring.multiple is true or if it is absent.
- *
- * The rate of these events is controlled by ro.telephony.call_ring.delay
- * and has a default value of 3000 (3 seconds) if absent.
- *
- * "data" is null for GSM
- * "data" is const RIL_CDMA_SignalInfoRecord * if CDMA
- */
-#define RIL_UNSOL_CALL_RING 1018
-
-/**
- * RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED
- *
- * Indicates that SIM state changes.
- *
- * Callee will invoke RIL_REQUEST_GET_SIM_STATUS on main thread
-
- * "data" is null
- */
-#define RIL_UNSOL_RESPONSE_SIM_STATUS_CHANGED 1019
-
-/**
- * RIL_UNSOL_RESPONSE_CDMA_NEW_SMS
- *
- * Called when new CDMA SMS is received
- *
- * "data" is const RIL_CDMA_SMS_Message *
- *
- * Callee will subsequently confirm the receipt of the SMS with
- * a RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE
- *
- * No new RIL_UNSOL_RESPONSE_CDMA_NEW_SMS should be sent until
- * RIL_REQUEST_CDMA_SMS_ACKNOWLEDGE has been received
- *
- */
-#define RIL_UNSOL_RESPONSE_CDMA_NEW_SMS 1020
-
-/**
- * RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS
- *
- * Called when new Broadcast SMS is received
- *
- * "data" can be one of the following:
- * If received from GSM network, "data" is const char of 88 bytes
- * which indicates each page of a CBS Message sent to the MS by the
- * BTS as coded in 3GPP 23.041 Section 9.4.1.2.
- * If received from UMTS network, "data" is const char of 90 up to 1252
- * bytes which contain between 1 and 15 CBS Message pages sent as one
- * packet to the MS by the BTS as coded in 3GPP 23.041 Section 9.4.2.2.
- *
- */
-#define RIL_UNSOL_RESPONSE_NEW_BROADCAST_SMS 1021
-
-/**
- * RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL
- *
- * Indicates that SMS storage on the RUIM is full. Messages
- * cannot be saved on the RUIM until space is freed.
- *
- * "data" is null
- *
- */
-#define RIL_UNSOL_CDMA_RUIM_SMS_STORAGE_FULL 1022
-
-/**
- * RIL_UNSOL_RESTRICTED_STATE_CHANGED
- *
- * Indicates a restricted state change (eg, for Domain Specific Access Control).
- *
- * Radio need send this msg after radio off/on cycle no matter it is changed or not.
- *
- * "data" is an int *
- * ((int *)data)[0] contains a bitmask of RIL_RESTRICTED_STATE_* values.
- */
-#define RIL_UNSOL_RESTRICTED_STATE_CHANGED 1023
-
-/**
- * RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE
- *
- * Indicates that the radio system selection module has
- * autonomously entered emergency callback mode.
- *
- * "data" is null
- *
- */
-#define RIL_UNSOL_ENTER_EMERGENCY_CALLBACK_MODE 1024
-
-/**
- * RIL_UNSOL_CDMA_CALL_WAITING
- *
- * Called when CDMA radio receives a call waiting indication.
- *
- * "data" is const RIL_CDMA_CallWaiting *
- *
- */
-#define RIL_UNSOL_CDMA_CALL_WAITING 1025
-
-/**
- * RIL_UNSOL_CDMA_OTA_PROVISION_STATUS
- *
- * Called when CDMA radio receives an update of the progress of an
- * OTASP/OTAPA call.
- *
- * "data" is const int *
- * For CDMA this is an integer OTASP/OTAPA status listed in
- * RIL_CDMA_OTA_ProvisionStatus.
- *
- */
-#define RIL_UNSOL_CDMA_OTA_PROVISION_STATUS 1026
-
-/**
- * RIL_UNSOL_CDMA_INFO_REC
- *
- * Called when CDMA radio receives one or more info recs.
- *
- * "data" is const RIL_CDMA_InformationRecords *
- *
- */
-#define RIL_UNSOL_CDMA_INFO_REC 1027
-
-/**
- * RIL_UNSOL_OEM_HOOK_RAW
- *
- * This is for OEM specific use.
- *
- * "data" is a byte[]
- */
-#define RIL_UNSOL_OEM_HOOK_RAW 1028
-
-/**
- * RIL_UNSOL_RINGBACK_TONE
- *
- * Indicates that nework doesn't have in-band information, need to
- * play out-band tone.
- *
- * "data" is an int *
- * ((int *)data)[0] == 0 for stop play ringback tone.
- * ((int *)data)[0] == 1 for start play ringback tone.
- */
-#define RIL_UNSOL_RINGBACK_TONE 1029
-
-/**
- * RIL_UNSOL_RESEND_INCALL_MUTE
- *
- * Indicates that framework/application need reset the uplink mute state.
- *
- * There may be situations where the mute state becomes out of sync
- * between the application and device in some GSM infrastructures.
- *
- * "data" is null
- */
-#define RIL_UNSOL_RESEND_INCALL_MUTE 1030
-
-/**
- * RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED
- *
- * Called when CDMA subscription source changed.
- *
- * "data" is int *
- * ((int *)data)[0] is == RIL_CdmaSubscriptionSource
- */
-#define RIL_UNSOL_CDMA_SUBSCRIPTION_SOURCE_CHANGED 1031
-
-/**
- * RIL_UNSOL_CDMA_PRL_CHANGED
- *
- * Called when PRL (preferred roaming list) changes.
- *
- * "data" is int *
- * ((int *)data)[0] is PRL_VERSION as would be returned by RIL_REQUEST_CDMA_SUBSCRIPTION
- */
-#define RIL_UNSOL_CDMA_PRL_CHANGED 1032
-
-/**
- * RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE
- *
- * Called when Emergency Callback Mode Ends
- *
- * Indicates that the radio system selection module has
- * proactively exited emergency callback mode.
- *
- * "data" is NULL
- *
- */
-#define RIL_UNSOL_EXIT_EMERGENCY_CALLBACK_MODE 1033
-
-/**
- * RIL_UNSOL_RIL_CONNECTED
- *
- * Called the ril connects and returns the version
- *
- * "data" is int *
- * ((int *)data)[0] is RIL_VERSION
- */
-#define RIL_UNSOL_RIL_CONNECTED 1034
-
-/**
- * RIL_UNSOL_VOICE_RADIO_TECH_CHANGED
- *
- * Indicates that voice technology has changed. Contains new radio technology
- * as a data in the message.
- *
- * "data" is int *
- * ((int *)data)[0] is of type const RIL_RadioTechnology
- *
- */
-#define RIL_UNSOL_VOICE_RADIO_TECH_CHANGED 1035
-
-/**
- * RIL_UNSOL_CELL_INFO_LIST
- *
- * Same information as returned by RIL_REQUEST_GET_CELL_INFO_LIST, but returned
- * at the rate no greater than specified by RIL_REQUEST_SET_UNSOL_CELL_INFO_RATE.
- *
- * "data" is NULL
- *
- * "response" is an array of RIL_CellInfo.
- */
-#define RIL_UNSOL_CELL_INFO_LIST 1036
-
-/**
- * RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED
- *
- * Called when IMS registration state has changed
- *
- * To get IMS registration state and IMS SMS format, callee needs to invoke the
- * following request on main thread:
- *
- * RIL_REQUEST_IMS_REGISTRATION_STATE
- *
- * "data" is NULL
- *
- */
-#define RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 1037
-
-/**
- * RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED
- *
- * Indicated when there is a change in subscription status.
- * This event will be sent in the following scenarios
- * - subscription readiness at modem, which was selected by telephony layer
- * - when subscription is deactivated by modem due to UICC card removal
- * - When network invalidates the subscription i.e. attach reject due to authentication reject
- *
- * "data" is const int *
- * ((const int *)data)[0] == 0 for Subscription Deactivated
- * ((const int *)data)[0] == 1 for Subscription Activated
- *
- */
-#define RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 1038
-
-/**
- * RIL_UNSOL_SRVCC_STATE_NOTIFY
- *
- * Called when Single Radio Voice Call Continuity(SRVCC)
- * progress state has changed
- *
- * "data" is int *
- * ((int *)data)[0] is of type const RIL_SrvccState
- *
- */
-
-#define RIL_UNSOL_SRVCC_STATE_NOTIFY 1039
-
-/**
- * RIL_UNSOL_HARDWARE_CONFIG_CHANGED
- *
- * Called when the hardware configuration associated with the RILd changes
- *
- * "data" is an array of RIL_HardwareConfig
- *
- */
-#define RIL_UNSOL_HARDWARE_CONFIG_CHANGED 1040
-
-/**
- * RIL_UNSOL_DC_RT_INFO_CHANGED
- *
- * The message is DEPRECATED, use RIL_REQUEST_GET_ACTIVITY_INFO
- * Sent when the DC_RT_STATE changes but the time
- * between these messages must not be less than the
- * value set by RIL_REQUEST_SET_DC_RT_RATE.
- *
- * "data" is the most recent RIL_DcRtInfo
- *
- */
-#define RIL_UNSOL_DC_RT_INFO_CHANGED 1041
-
-/**
- * RIL_UNSOL_RADIO_CAPABILITY
- *
- * Sent when RIL_REQUEST_SET_RADIO_CAPABILITY completes.
- * Returns the phone radio capability exactly as
- * RIL_REQUEST_GET_RADIO_CAPABILITY and should be the
- * same set as sent by RIL_REQUEST_SET_RADIO_CAPABILITY.
- *
- * "data" is the RIL_RadioCapability structure
- */
-#define RIL_UNSOL_RADIO_CAPABILITY 1042
-
-/*
- * RIL_UNSOL_ON_SS
- *
- * Called when SS response is received when DIAL/USSD/SS is changed to SS by
- * call control.
- *
- * "data" is const RIL_StkCcUnsolSsResponse *
- *
- */
-#define RIL_UNSOL_ON_SS 1043
-
-/**
- * RIL_UNSOL_STK_CC_ALPHA_NOTIFY
- *
- * Called when there is an ALPHA from UICC during Call Control.
- *
- * "data" is const char * containing ALPHA string from UICC in UTF-8 format.
- *
- */
-#define RIL_UNSOL_STK_CC_ALPHA_NOTIFY 1044
-
- /**
- * RIL_UNSOL_LCEDATA_RECV
- *
- * Called when there is an incoming Link Capacity Estimate (LCE) info report.
- *
- * "data" is the RIL_LceDataInfo structure.
- *
- */
-#define RIL_UNSOL_LCEDATA_RECV 1045
-
-/* SAMSUNG RESPONSE */
-#define SAMSUNG_UNSOL_RESPONSE_BASE 11000
-
-#define RIL_UNSOL_RELEASE_COMPLETE_MESSAGE 11001
-#define RIL_UNSOL_STK_SEND_SMS_RESULT 11002
-#define RIL_UNSOL_STK_CALL_CONTROL_RESULT 11003
-#define RIL_UNSOL_DUN_CALL_STATUS 11004
-
-#define RIL_UNSOL_O2_HOME_ZONE_INFO 11007
-#define RIL_UNSOL_DEVICE_READY_NOTI 11008
-#define RIL_UNSOL_GPS_NOTI 11009
-#define RIL_UNSOL_AM 11010
-#define RIL_UNSOL_DUN_PIN_CONTROL_SIGNAL 11011
-#define RIL_UNSOL_DATA_SUSPEND_RESUME 11012
-#define RIL_UNSOL_SAP 11013
-
-#define RIL_UNSOL_SIM_SMS_STORAGE_AVAILALE 11015
-#define RIL_UNSOL_HSDPA_STATE_CHANGED 11016
-#define RIL_UNSOL_WB_AMR_STATE 11017
-#define RIL_UNSOL_TWO_MIC_STATE 11018
-#define RIL_UNSOL_DHA_STATE 11019
-#define RIL_UNSOL_UART 11020
-#define RIL_UNSOL_RESPONSE_HANDOVER 11021
-#define RIL_UNSOL_IPV6_ADDR 11022
-#define RIL_UNSOL_NWK_INIT_DISC_REQUEST 11023
-#define RIL_UNSOL_RTS_INDICATION 11024
-#define RIL_UNSOL_OMADM_SEND_DATA 11025
-#define RIL_UNSOL_DUN 11026
-#define RIL_UNSOL_SYSTEM_REBOOT 11027
-#define RIL_UNSOL_VOICE_PRIVACY_CHANGED 11028
-#define RIL_UNSOL_UTS_GETSMSCOUNT 11029
-#define RIL_UNSOL_UTS_GETSMSMSG 11030
-#define RIL_UNSOL_UTS_GET_UNREAD_SMS_STATUS 11031
-#define RIL_UNSOL_MIP_CONNECT_STATUS 11032
-
-/***********************************************************************/
-
-
-#if defined(ANDROID_MULTI_SIM)
-/**
- * RIL_Request Function pointer
- *
- * @param request is one of RIL_REQUEST_*
- * @param data is pointer to data defined for that RIL_REQUEST_*
- * data is owned by caller, and should not be modified or freed by callee
- * @param t should be used in subsequent call to RIL_onResponse
- * @param datalen the length of data
- *
- */
-typedef void (*RIL_RequestFunc) (int request, void *data,
- size_t datalen, RIL_Token t, RIL_SOCKET_ID socket_id);
-
-/**
- * This function should return the current radio state synchronously
- */
-typedef RIL_RadioState (*RIL_RadioStateRequest)(RIL_SOCKET_ID socket_id);
-
-#else
-/* Backward compatible */
-
-/**
- * RIL_Request Function pointer
- *
- * @param request is one of RIL_REQUEST_*
- * @param data is pointer to data defined for that RIL_REQUEST_*
- * data is owned by caller, and should not be modified or freed by callee
- * @param t should be used in subsequent call to RIL_onResponse
- * @param datalen the length of data
- *
- */
-typedef void (*RIL_RequestFunc) (int request, void *data,
- size_t datalen, RIL_Token t);
-
-/**
- * This function should return the current radio state synchronously
- */
-typedef RIL_RadioState (*RIL_RadioStateRequest)();
-
-#endif
-
-
-/**
- * This function returns "1" if the specified RIL_REQUEST code is
- * supported and 0 if it is not
- *
- * @param requestCode is one of RIL_REQUEST codes
- */
-
-typedef int (*RIL_Supports)(int requestCode);
-
-/**
- * This function is called from a separate thread--not the
- * thread that calls RIL_RequestFunc--and indicates that a pending
- * request should be cancelled.
- *
- * On cancel, the callee should do its best to abandon the request and
- * call RIL_onRequestComplete with RIL_Errno CANCELLED at some later point.
- *
- * Subsequent calls to RIL_onRequestComplete for this request with
- * other results will be tolerated but ignored. (That is, it is valid
- * to ignore the cancellation request)
- *
- * RIL_Cancel calls should return immediately, and not wait for cancellation
- *
- * Please see ITU v.250 5.6.1 for how one might implement this on a TS 27.007
- * interface
- *
- * @param t token wants to be canceled
- */
-
-typedef void (*RIL_Cancel)(RIL_Token t);
-
-typedef void (*RIL_TimedCallback) (void *param);
-
-/**
- * Return a version string for your RIL implementation
- */
-typedef const char * (*RIL_GetVersion) (void);
-
-typedef struct {
- int version; /* set to RIL_VERSION */
- RIL_RequestFunc onRequest;
- RIL_RadioStateRequest onStateRequest;
- RIL_Supports supports;
- RIL_Cancel onCancel;
- RIL_GetVersion getVersion;
-} RIL_RadioFunctions;
-
-typedef struct {
- char *apn;
- char *protocol;
- int authtype;
- char *username;
- char *password;
-} RIL_InitialAttachApn;
-
-typedef struct {
- int authContext; /* P2 value of authentication command, see P2 parameter in
- 3GPP TS 31.102 7.1.2 */
- char *authData; /* the challenge string in Base64 format, see 3GPP
- TS 31.102 7.1.2 */
- char *aid; /* AID value, See ETSI 102.221 8.1 and 101.220 4,
- NULL if no value. */
-} RIL_SimAuthentication;
-
-#ifdef RIL_SHLIB
-struct RIL_Env {
- /**
- * "t" is parameter passed in on previous call to RIL_Notification
- * routine.
- *
- * If "e" != SUCCESS, then response can be null/is ignored
- *
- * "response" is owned by caller, and should not be modified or
- * freed by callee
- *
- * RIL_onRequestComplete will return as soon as possible
- */
- void (*OnRequestComplete)(RIL_Token t, RIL_Errno e,
- void *response, size_t responselen);
-
-#if defined(ANDROID_MULTI_SIM)
- /**
- * "unsolResponse" is one of RIL_UNSOL_RESPONSE_*
- * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_*
- *
- * "data" is owned by caller, and should not be modified or freed by callee
- */
- void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen, RIL_SOCKET_ID socket_id);
-#else
- /**
- * "unsolResponse" is one of RIL_UNSOL_RESPONSE_*
- * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_*
- *
- * "data" is owned by caller, and should not be modified or freed by callee
- */
- void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen);
-#endif
- /**
- * Call user-specifed "callback" function on on the same thread that
- * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies
- * a relative time value at which the callback is invoked. If relativeTime is
- * NULL or points to a 0-filled structure, the callback will be invoked as
- * soon as possible
- */
-
- void (*RequestTimedCallback) (RIL_TimedCallback callback,
- void *param, const struct timeval *relativeTime);
-};
-
-
-/**
- * RIL implementations must defined RIL_Init
- * argc and argv will be command line arguments intended for the RIL implementation
- * Return NULL on error
- *
- * @param env is environment point defined as RIL_Env
- * @param argc number of arguments
- * @param argv list fo arguments
- *
- */
-const RIL_RadioFunctions *RIL_Init(const struct RIL_Env *env, int argc, char **argv);
-
-#else /* RIL_SHLIB */
-
-/**
- * Call this once at startup to register notification routine
- *
- * @param callbacks user-specifed callback function
- */
-void RIL_register (const RIL_RadioFunctions *callbacks);
-
-
-/**
- *
- * RIL_onRequestComplete will return as soon as possible
- *
- * @param t is parameter passed in on previous call to RIL_Notification
- * routine.
- * @param e error code
- * if "e" != SUCCESS, then response can be null/is ignored
- * @param response is owned by caller, and should not be modified or
- * freed by callee
- * @param responselen the length of response in byte
- */
-void RIL_onRequestComplete(RIL_Token t, RIL_Errno e,
- void *response, size_t responselen);
-
-#if defined(ANDROID_MULTI_SIM)
-/**
- * @param unsolResponse is one of RIL_UNSOL_RESPONSE_*
- * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_*
- * "data" is owned by caller, and should not be modified or freed by callee
- * @param datalen the length of data in byte
- */
-
-void RIL_onUnsolicitedResponse(int unsolResponse, const void *data,
- size_t datalen, RIL_SOCKET_ID socket_id);
-#else
-/**
- * @param unsolResponse is one of RIL_UNSOL_RESPONSE_*
- * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_*
- * "data" is owned by caller, and should not be modified or freed by callee
- * @param datalen the length of data in byte
- */
-
-void RIL_onUnsolicitedResponse(int unsolResponse, const void *data,
- size_t datalen);
-#endif
-
-/**
- * Call user-specifed "callback" function on on the same thread that
- * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies
- * a relative time value at which the callback is invoked. If relativeTime is
- * NULL or points to a 0-filled structure, the callback will be invoked as
- * soon as possible
- *
- * @param callback user-specifed callback function
- * @param param parameter list
- * @param relativeTime a relative time value at which the callback is invoked
- */
-
-void RIL_requestTimedCallback (RIL_TimedCallback callback,
- void *param, const struct timeval *relativeTime);
-
-
-#endif /* RIL_SHLIB */
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif /*ANDROID_RIL_H*/