diff options
| -rw-r--r-- | include/telephony/ril.h | 948 |
1 files changed, 929 insertions, 19 deletions
diff --git a/include/telephony/ril.h b/include/telephony/ril.h index 572aa46..5514977 100644 --- a/include/telephony/ril.h +++ b/include/telephony/ril.h @@ -20,6 +20,9 @@ #include <stdlib.h> #include <stdint.h> #include <telephony/ril_cdma_sms.h> +#include <telephony/ril_nv_items.h> +#include <telephony/ril_msim.h> + #ifndef FEATURE_UNIT_TEST #include <sys/time.h> #endif /* !FEATURE_UNIT_TEST */ @@ -28,19 +31,53 @@ extern "C" { #endif -#define RIL_VERSION 9 /* Current version */ -#ifdef LEGACY_RIL -#define RIL_VERSION_MIN 2 /* Minimum RIL_VERSION supported */ + +#if defined(ANDROID_SIM_COUNT_2) +#define SIM_COUNT 2 +#elif defined(ANDROID_SIM_COUNT_3) +#define SIM_COUNT 3 +#elif defined(ANDROID_SIM_COUNT_4) +#define SIM_COUNT 4 #else -#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */ +#define SIM_COUNT 1 #endif +#ifndef ANDROID_MULTI_SIM +#define SIM_COUNT 1 +#endif + +#define RIL_VERSION 11 /* Current version */ +#define RIL_VERSION_MIN 6 /* Minimum RIL_VERSION supported */ + #define CDMA_ALPHA_INFO_BUFFER_LENGTH 64 #define CDMA_NUMBER_INFO_BUFFER_LENGTH 81 +#define MAX_RILDS 3 +#define MAX_SOCKET_NAME_LENGTH 6 +#define MAX_CLIENT_ID_LENGTH 2 +#define MAX_DEBUG_SOCKET_NAME_LENGTH 12 +#define MAX_QEMU_PIPE_NAME_LENGTH 11 +#define MAX_UUID_LENGTH 64 + + typedef void * RIL_Token; typedef enum { + RIL_SOCKET_1, +#if (SIM_COUNT >= 2) + RIL_SOCKET_2, +#if (SIM_COUNT >= 3) + RIL_SOCKET_3, +#endif +#if (SIM_COUNT >= 4) + RIL_SOCKET_4, +#endif +#endif + RIL_SOCKET_NUM +} RIL_SOCKET_ID; + + +typedef enum { RIL_E_SUCCESS = 0, RIL_E_RADIO_NOT_AVAILABLE = 1, /* If radio did not start or is resetting */ RIL_E_GENERIC_FAILURE = 2, @@ -61,8 +98,24 @@ typedef enum { location */ RIL_E_MODE_NOT_SUPPORTED = 13, /* HW does not support preferred network type */ RIL_E_FDN_CHECK_FAILURE = 14, /* command failed because recipient is not on FDN list */ - RIL_E_ILLEGAL_SIM_OR_ME = 15 /* network selection failed due to + RIL_E_ILLEGAL_SIM_OR_ME = 15, /* network selection failed due to illegal SIM or ME */ + RIL_E_MISSING_RESOURCE = 16, /* no logical channel available */ + RIL_E_NO_SUCH_ELEMENT = 17, /* application not found on SIM */ + RIL_E_DIAL_MODIFIED_TO_USSD = 18, /* DIAL request modified to USSD */ + RIL_E_DIAL_MODIFIED_TO_SS = 19, /* DIAL request modified to SS */ + RIL_E_DIAL_MODIFIED_TO_DIAL = 20, /* DIAL request modified to DIAL with different + data */ + RIL_E_USSD_MODIFIED_TO_DIAL = 21, /* USSD request modified to DIAL */ + RIL_E_USSD_MODIFIED_TO_SS = 22, /* USSD request modified to SS */ + RIL_E_USSD_MODIFIED_TO_USSD = 23, /* USSD request modified to different USSD + request */ + RIL_E_SS_MODIFIED_TO_DIAL = 24, /* SS request modified to DIAL */ + RIL_E_SS_MODIFIED_TO_USSD = 25, /* SS request modified to USSD */ + RIL_E_SUBSCRIPTION_NOT_SUPPORTED = 26, /* Subscription not supported by RIL */ + RIL_E_SS_MODIFIED_TO_SS = 27 /* SS request modified to different SS request */ + + } RIL_Errno; typedef enum { @@ -109,9 +162,65 @@ typedef enum { RADIO_TECH_LTE = 14, RADIO_TECH_HSPAP = 15, // HSPA+ RADIO_TECH_GSM = 16, // Only supports voice - RADIO_TECH_DCHSPAP = 30 + RADIO_TECH_TD_SCDMA = 17 } RIL_RadioTechnology; +typedef enum { + RAF_UNKNOWN = (1 << RADIO_TECH_UNKNOWN), + RAF_GPRS = (1 << RADIO_TECH_GPRS), + RAF_EDGE = (1 << RADIO_TECH_EDGE), + RAF_UMTS = (1 << RADIO_TECH_UMTS), + RAF_IS95A = (1 << RADIO_TECH_IS95A), + RAF_IS95B = (1 << RADIO_TECH_IS95B), + RAF_1xRTT = (1 << RADIO_TECH_1xRTT), + RAF_EVDO_0 = (1 << RADIO_TECH_EVDO_0), + RAF_EVDO_A = (1 << RADIO_TECH_EVDO_A), + RAF_HSDPA = (1 << RADIO_TECH_HSDPA), + RAF_HSUPA = (1 << RADIO_TECH_HSUPA), + RAF_HSPA = (1 << RADIO_TECH_HSPA), + RAF_EVDO_B = (1 << RADIO_TECH_EVDO_B), + RAF_EHRPD = (1 << RADIO_TECH_EHRPD), + RAF_LTE = (1 << RADIO_TECH_LTE), + RAF_HSPAP = (1 << RADIO_TECH_HSPAP), + RAF_GSM = (1 << RADIO_TECH_GSM), + RAF_TD_SCDMA = (1 << RADIO_TECH_TD_SCDMA), +} RIL_RadioAccessFamily; + +typedef enum { + RC_PHASE_CONFIGURED = 0, // LM is configured is initial value and value after FINISH completes + RC_PHASE_START = 1, // START is sent before Apply and indicates that an APPLY will be + // forthcoming with these same parameters + RC_PHASE_APPLY = 2, // APPLY is sent after all LM's receive START and returned + // RIL_RadioCapability.status = 0, if any START's fail no + // APPLY will be sent + RC_PHASE_UNSOL_RSP = 3, // UNSOL_RSP is sent with RIL_UNSOL_RADIO_CAPABILITY + RC_PHASE_FINISH = 4 // FINISH is sent after all commands have completed. If an error + // occurs in any previous command the RIL_RadioAccessesFamily and + // logicalModemUuid fields will be the prior configuration thus + // restoring the configuration to the previous value. An error + // returned by this command will generally be ignored or may + // cause that logical modem to be removed from service. +} RadioCapabilityPhase; + +typedef enum { + RC_STATUS_NONE = 0, // This parameter has no meaning with RC_PHASE_START, + // RC_PHASE_APPLY + RC_STATUS_SUCCESS = 1, // Tell modem the action transaction of set radio + // capability was success with RC_PHASE_FINISH + RC_STATUS_FAIL = 2, // Tell modem the action transaction of set radio + // capability is fail with RC_PHASE_FINISH. +} RadioCapabilityStatus; + +#define RIL_RADIO_CAPABILITY_VERSION 1 +typedef struct { + int version; // Version of structure, RIL_RADIO_CAPABILITY_VERSION + int session; // Unique session value defined by framework returned in all "responses/unsol" + int phase; // CONFIGURED, START, APPLY, FINISH + int rat; // RIL_RadioAccessFamily for the radio + char logicalModemUuid[MAX_UUID_LENGTH]; // A UUID typically "com.xxxx.lmX where X is the logical modem. + int status; // Return status and an input parameter for RC_PHASE_FINISH +} RIL_RadioCapability; + // Do we want to split Data from Voice and the use // RIL_RadioTechnology for get/setPreferredVoice/Data ? typedef enum { @@ -210,7 +319,6 @@ typedef struct { */ typedef struct { int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ -#ifndef HCRADIO int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry back-off timer value RIL wants to override the one pre-configured in FW. @@ -218,7 +326,6 @@ typedef struct { The value < 0 means no value is suggested. The value 0 means retry should be done ASAP. The value of INT_MAX(0x7fffffff) means no retry. */ -#endif int cid; /* Context ID, uniquely identifies this call */ int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. @@ -241,6 +348,75 @@ typedef struct { to point connections. */ } RIL_Data_Call_Response_v6; +typedef struct { + int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ + int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry + back-off timer value RIL wants to override the one + pre-configured in FW. + The unit is miliseconds. + The value < 0 means no value is suggested. + The value 0 means retry should be done ASAP. + The value of INT_MAX(0x7fffffff) means no retry. */ + int cid; /* Context ID, uniquely identifies this call */ + int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ + char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. + For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is + PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported + such as "IP" or "IPV6" */ + char * ifname; /* The network interface name */ + char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, + e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". + May not be empty, typically 1 IPv4 or 1 IPv6 or + one of each. If the prefix length is absent the addresses + are assumed to be point to point with IPv4 having a prefix + length of 32 and IPv6 128. */ + char * dnses; /* A space-delimited list of DNS server addresses, + e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". + May be empty. */ + char * gateways; /* A space-delimited list of default gateway addresses, + e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". + May be empty in which case the addresses represent point + to point connections. */ + char * pcscf; /* the Proxy Call State Control Function address + via PCO(Protocol Configuration Option) for IMS client. */ +} RIL_Data_Call_Response_v9; + +typedef struct { + int status; /* A RIL_DataCallFailCause, 0 which is PDP_FAIL_NONE if no error */ + int suggestedRetryTime; /* If status != 0, this fields indicates the suggested retry + back-off timer value RIL wants to override the one + pre-configured in FW. + The unit is miliseconds. + The value < 0 means no value is suggested. + The value 0 means retry should be done ASAP. + The value of INT_MAX(0x7fffffff) means no retry. */ + int cid; /* Context ID, uniquely identifies this call */ + int active; /* 0=inactive, 1=active/physical link down, 2=active/physical link up */ + char * type; /* One of the PDP_type values in TS 27.007 section 10.1.1. + For example, "IP", "IPV6", "IPV4V6", or "PPP". If status is + PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED this is the type supported + such as "IP" or "IPV6" */ + char * ifname; /* The network interface name */ + char * addresses; /* A space-delimited list of addresses with optional "/" prefix length, + e.g., "192.0.1.3" or "192.0.1.11/16 2001:db8::1/64". + May not be empty, typically 1 IPv4 or 1 IPv6 or + one of each. If the prefix length is absent the addresses + are assumed to be point to point with IPv4 having a prefix + length of 32 and IPv6 128. */ + char * dnses; /* A space-delimited list of DNS server addresses, + e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". + May be empty. */ + char * gateways; /* A space-delimited list of default gateway addresses, + e.g., "192.0.1.3" or "192.0.1.11 2001:db8::1". + May be empty in which case the addresses represent point + to point connections. */ + char * pcscf; /* the Proxy Call State Control Function address + via PCO(Protocol Configuration Option) for IMS client. */ + int mtu; /* MTU received from network + Value <= 0 means network has either not sent a value or + sent an invalid value */ +} RIL_Data_Call_Response_v11; + typedef enum { RADIO_TECH_3GPP = 1, /* 3GPP Technologies - GSM, WCDMA */ RADIO_TECH_3GPP2 = 2 /* 3GPP2 Technologies - CDMA */ @@ -327,10 +503,27 @@ typedef struct { char *aidPtr; /* AID value, See ETSI 102.221 8.1 and 101.220 4, NULL if no value. */ } RIL_SIM_IO_v6; +/* Used by RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL and + * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC. */ +typedef struct { + int sessionid; /* "sessionid" from TS 27.007 +CGLA command. Should be + ignored for +CSIM command. */ + + /* Following fields are used to derive the APDU ("command" and "length" + values in TS 27.007 +CSIM and +CGLA commands). */ + int cla; + int instruction; + int p1; + int p2; + int p3; /* A negative P3 implies a 4 byte APDU. */ + char *data; /* May be NULL. In hex string format. */ +} RIL_SIM_APDU; + typedef struct { int sw1; int sw2; - char *simResponse; /* In hex string format ([a-fA-F0-9]*). */ + char *simResponse; /* In hex string format ([a-fA-F0-9]*), except for SIM_AUTHENTICATION + response for which it is in Base64 format, see 3GPP TS 31.102 7.1.2 */ } RIL_SIM_IO_Response; /* See also com.android.internal.telephony.gsm.CallForwardInfo */ @@ -383,6 +576,9 @@ typedef enum { CALL_FAIL_FDN_BLOCKED = 241, CALL_FAIL_IMSI_UNKNOWN_IN_VLR = 242, CALL_FAIL_IMEI_NOT_ACCEPTED = 243, + CALL_FAIL_DIAL_MODIFIED_TO_USSD = 244, /* STK Call Control */ + CALL_FAIL_DIAL_MODIFIED_TO_SS = 245, + CALL_FAIL_DIAL_MODIFIED_TO_DIAL = 246, CALL_FAIL_CDMA_LOCKED_UNTIL_POWER_CYCLE = 1000, CALL_FAIL_CDMA_DROP = 1001, CALL_FAIL_CDMA_INTERCEPT = 1002, @@ -418,7 +614,8 @@ typedef enum { PDP_FAIL_SERVICE_OPTION_NOT_SUBSCRIBED = 0x21, /* no retry */ PDP_FAIL_SERVICE_OPTION_OUT_OF_ORDER = 0x22, PDP_FAIL_NSAPI_IN_USE = 0x23, /* no retry */ - PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* restart radio */ + PDP_FAIL_REGULAR_DEACTIVATION = 0x24, /* possibly restart radio, + based on framework config */ PDP_FAIL_ONLY_IPV4_ALLOWED = 0x32, /* no retry */ PDP_FAIL_ONLY_IPV6_ALLOWED = 0x33, /* no retry */ PDP_FAIL_ONLY_SINGLE_BEARER_ALLOWED = 0x34, @@ -445,7 +642,11 @@ typedef enum { typedef enum { RIL_DATA_PROFILE_DEFAULT = 0, RIL_DATA_PROFILE_TETHERED = 1, - RIL_DATA_PROFILE_OEM_BASE = 1000 /* Start of OEM-specific profiles */ + RIL_DATA_PROFILE_IMS = 2, + RIL_DATA_PROFILE_FOTA = 3, + RIL_DATA_PROFILE_CBS = 4, + RIL_DATA_PROFILE_OEM_BASE = 1000, /* Start of OEM-specific profiles */ + RIL_DATA_PROFILE_INVALID = 0xFFFFFFFF } RIL_DataProfile; /* Used by RIL_UNSOL_SUPP_SVC_NOTIFICATION */ @@ -749,6 +950,13 @@ typedef struct { * also: http://www.cellular-planningoptimization.com/2010/02/timing-advance-with-calculation.html */ } RIL_LTE_SignalStrength_v8; +typedef struct { + int rscp; /* The Received Signal Code Power in dBm multipled by -1. + * Range : 25 to 120 + * INT_MAX: 0x7FFFFFFF denotes invalid value. + * Reference: 3GPP TS 25.123, section 9.1.1.1 */ +} RIL_TD_SCDMA_SignalStrength; + /* Deprecated, use RIL_SignalStrength_v6 */ typedef struct { RIL_GW_SignalStrength GW_SignalStrength; @@ -770,6 +978,14 @@ typedef struct { RIL_LTE_SignalStrength_v8 LTE_SignalStrength; } RIL_SignalStrength_v8; +typedef struct { + RIL_GW_SignalStrength GW_SignalStrength; + RIL_CDMA_SignalStrength CDMA_SignalStrength; + RIL_EVDO_SignalStrength EVDO_SignalStrength; + RIL_LTE_SignalStrength_v8 LTE_SignalStrength; + RIL_TD_SCDMA_SignalStrength TD_SCDMA_SignalStrength; +} RIL_SignalStrength_v10; + /** RIL_CellIdentityGsm */ typedef struct { int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ @@ -812,6 +1028,15 @@ typedef struct { int tac; /* 16-bit tracking area code, INT_MAX if unknown */ } RIL_CellIdentityLte; +/** RIL_CellIdentityTdscdma */ +typedef struct { + int mcc; /* 3-digit Mobile Country Code, 0..999, INT_MAX if unknown */ + int mnc; /* 2 or 3-digit Mobile Network Code, 0..999, INT_MAX if unknown */ + int lac; /* 16-bit Location Area Code, 0..65535, INT_MAX if unknown */ + int cid; /* 28-bit UMTS Cell Identity described in TS 25.331, 0..268435455, INT_MAX if unknown */ + int cpid; /* 8-bit Cell Parameters ID described in TS 25.331, 0..127, INT_MAX if unknown */ +} RIL_CellIdentityTdscdma; + /** RIL_CellInfoGsm */ typedef struct { RIL_CellIdentityGsm cellIdentityGsm; @@ -837,12 +1062,19 @@ typedef struct { RIL_LTE_SignalStrength_v8 signalStrengthLte; } RIL_CellInfoLte; +/** RIL_CellInfoTdscdma */ +typedef struct { + RIL_CellIdentityTdscdma cellIdentityTdscdma; + RIL_TD_SCDMA_SignalStrength signalStrengthTdscdma; +} RIL_CellInfoTdscdma; + // Must be the same as CellInfo.TYPE_XXX typedef enum { RIL_CELL_INFO_TYPE_GSM = 1, RIL_CELL_INFO_TYPE_CDMA = 2, RIL_CELL_INFO_TYPE_LTE = 3, RIL_CELL_INFO_TYPE_WCDMA = 4, + RIL_CELL_INFO_TYPE_TD_SCDMA = 5 } RIL_CellInfoType; // Must be the same as CellInfo.TIMESTAMP_TYPE_XXX @@ -864,6 +1096,7 @@ typedef struct { RIL_CellInfoCdma cdma; RIL_CellInfoLte lte; RIL_CellInfoWcdma wcdma; + RIL_CellInfoTdscdma tdscdma; } CellInfo; } RIL_CellInfo; @@ -981,6 +1214,185 @@ typedef struct { RIL_CDMA_InformationRecord infoRec[RIL_CDMA_MAX_NUMBER_OF_INFO_RECS]; } RIL_CDMA_InformationRecords; +/* See RIL_REQUEST_NV_READ_ITEM */ +typedef struct { + RIL_NV_Item itemID; +} RIL_NV_ReadItem; + +/* See RIL_REQUEST_NV_WRITE_ITEM */ +typedef struct { + RIL_NV_Item itemID; + char * value; +} RIL_NV_WriteItem; + +typedef enum { + HANDOVER_STARTED = 0, + HANDOVER_COMPLETED = 1, + HANDOVER_FAILED = 2, + HANDOVER_CANCELED = 3 +} RIL_SrvccState; + +/* hardware configuration reported to RILJ. */ +typedef enum { + RIL_HARDWARE_CONFIG_MODEM = 0, + RIL_HARDWARE_CONFIG_SIM = 1, +} RIL_HardwareConfig_Type; + +typedef enum { + RIL_HARDWARE_CONFIG_STATE_ENABLED = 0, + RIL_HARDWARE_CONFIG_STATE_STANDBY = 1, + RIL_HARDWARE_CONFIG_STATE_DISABLED = 2, +} RIL_HardwareConfig_State; + +typedef struct { + int rilModel; + uint32_t rat; /* bitset - ref. RIL_RadioTechnology. */ + int maxVoice; + int maxData; + int maxStandby; +} RIL_HardwareConfig_Modem; + +typedef struct { + char modemUuid[MAX_UUID_LENGTH]; +} RIL_HardwareConfig_Sim; + +typedef struct { + RIL_HardwareConfig_Type type; + char uuid[MAX_UUID_LENGTH]; + RIL_HardwareConfig_State state; + union { + RIL_HardwareConfig_Modem modem; + RIL_HardwareConfig_Sim sim; + } cfg; +} RIL_HardwareConfig; + +typedef enum { + SS_CFU, + SS_CF_BUSY, + SS_CF_NO_REPLY, + SS_CF_NOT_REACHABLE, + SS_CF_ALL, + SS_CF_ALL_CONDITIONAL, + SS_CLIP, + SS_CLIR, + SS_COLP, + SS_COLR, + SS_WAIT, + SS_BAOC, + SS_BAOIC, + SS_BAOIC_EXC_HOME, + SS_BAIC, + SS_BAIC_ROAMING, + SS_ALL_BARRING, + SS_OUTGOING_BARRING, + SS_INCOMING_BARRING +} RIL_SsServiceType; + +typedef enum { + SS_ACTIVATION, + SS_DEACTIVATION, + SS_INTERROGATION, + SS_REGISTRATION, + SS_ERASURE +} RIL_SsRequestType; + +typedef enum { + SS_ALL_TELE_AND_BEARER_SERVICES, + SS_ALL_TELESEVICES, + SS_TELEPHONY, + SS_ALL_DATA_TELESERVICES, + SS_SMS_SERVICES, + SS_ALL_TELESERVICES_EXCEPT_SMS +} RIL_SsTeleserviceType; + +#define SS_INFO_MAX 4 +#define NUM_SERVICE_CLASSES 7 + +typedef struct { + int numValidIndexes; /* This gives the number of valid values in cfInfo. + For example if voice is forwarded to one number and data + is forwarded to a different one then numValidIndexes will be + 2 indicating total number of valid values in cfInfo. + Similarly if all the services are forwarded to the same + number then the value of numValidIndexes will be 1. */ + + RIL_CallForwardInfo cfInfo[NUM_SERVICE_CLASSES]; /* This is the response data + for SS request to query call + forward status. see + RIL_REQUEST_QUERY_CALL_FORWARD_STATUS */ +} RIL_CfData; + +typedef struct { + RIL_SsServiceType serviceType; + RIL_SsRequestType requestType; + RIL_SsTeleserviceType teleserviceType; + int serviceClass; + RIL_Errno result; + + union { + int ssInfo[SS_INFO_MAX]; /* This is the response data for most of the SS GET/SET + RIL requests. E.g. RIL_REQUSET_GET_CLIR returns + two ints, so first two values of ssInfo[] will be + used for response if serviceType is SS_CLIR and + requestType is SS_INTERROGATION */ + + RIL_CfData cfData; + }; +} RIL_StkCcUnsolSsResponse; + +/** + * Data connection power state + */ +typedef enum { + RIL_DC_POWER_STATE_LOW = 1, // Low power state + RIL_DC_POWER_STATE_MEDIUM = 2, // Medium power state + RIL_DC_POWER_STATE_HIGH = 3, // High power state + RIL_DC_POWER_STATE_UNKNOWN = INT32_MAX // Unknown state +} RIL_DcPowerStates; + +/** + * Data connection real time info + */ +typedef struct { + uint64_t time; // Time in nanos as returned by ril_nano_time + RIL_DcPowerStates powerState; // Current power state +} RIL_DcRtInfo; + +/** + * Data profile to modem + */ +typedef struct { + /* id of the data profile */ + int profileId; + /* the APN to connect to */ + char* apn; + /** one of the PDP_type values in TS 27.007 section 10.1.1. + * For example, "IP", "IPV6", "IPV4V6", or "PPP". + */ + char* protocol; + /** authentication protocol used for this PDP context + * (None: 0, PAP: 1, CHAP: 2, PAP&CHAP: 3) + */ + int authType; + /* the username for APN, or NULL */ + char* user; + /* the password for APN, or NULL */ + char* password; + /* the profile type, TYPE_COMMON-0, TYPE_3GPP-1, TYPE_3GPP2-2 */ + int type; + /* the period in seconds to limit the maximum connections */ + int maxConnsTime; + /* the maximum connections during maxConnsTime */ + int maxConns; + /** the required wait time in seconds after a successful UE initiated + * disconnect of a given PDN connection before the device can send + * a new PDN connection request for that given PDN + */ + int waitTime; + /* true to enable the profile, 0 to disable, 1 to enable */ + int enabled; +} RIL_DataProfileInfo; + /** * RIL_REQUEST_GET_SIM_STATUS * @@ -1017,7 +1429,6 @@ typedef struct { #define RIL_REQUEST_ENTER_SIM_PIN 2 - /** * RIL_REQUEST_ENTER_SIM_PUK * @@ -1195,6 +1606,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE (radio resetting) + * DIAL_MODIFIED_TO_USSD + * DIAL_MODIFIED_TO_SS + * DIAL_MODIFIED_TO_DIAL * GENERIC_FAILURE */ #define RIL_REQUEST_DIAL 10 @@ -1730,7 +2144,7 @@ typedef struct { * For example, "IP", "IPV6", "IPV4V6", or "PPP". * ((const char **)data)[7] Optional connection property parameters, format to be defined. * - * "response" is a RIL_Data_Call_Response_v6 + * "response" is a RIL_Data_Call_Response_v11 * * FIXME may need way to configure QoS settings * @@ -1798,6 +2212,9 @@ typedef struct { * SUCCESS * RADIO_NOT_AVAILABLE * FDN_CHECK_FAILURE + * USSD_MODIFIED_TO_DIAL + * USSD_MODIFIED_TO_SS + * USSD_MODIFIED_TO_USSD * GENERIC_FAILURE * * See also: RIL_REQUEST_CANCEL_USSD, RIL_UNSOL_ON_USSD @@ -1833,6 +2250,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE */ #define RIL_REQUEST_GET_CLIR 31 @@ -1848,6 +2268,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE */ #define RIL_REQUEST_SET_CLIR 32 @@ -1871,6 +2294,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE */ #define RIL_REQUEST_QUERY_CALL_FORWARD_STATUS 33 @@ -1887,6 +2313,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE */ #define RIL_REQUEST_SET_CALL_FORWARD 34 @@ -1913,6 +2342,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE */ #define RIL_REQUEST_QUERY_CALL_WAITING 35 @@ -1932,6 +2364,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE */ #define RIL_REQUEST_SET_CALL_WAITING 36 @@ -2074,6 +2509,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE * */ @@ -2103,6 +2541,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE * */ @@ -2125,6 +2566,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE * */ @@ -2345,6 +2789,9 @@ typedef struct { * Valid errors: * SUCCESS * RADIO_NOT_AVAILABLE (radio resetting) + * SS_MODIFIED_TO_DIAL + * SS_MODIFIED_TO_USSD + * SS_MODIFIED_TO_SS * GENERIC_FAILURE */ @@ -3580,7 +4027,335 @@ typedef struct { */ #define RIL_REQUEST_IMS_SEND_SMS 113 +/** + * RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC + * + * Request APDU exchange on the basic channel. This command reflects TS 27.007 + * "generic SIM access" operation (+CSIM). The modem must ensure proper function + * of GSM/CDMA, and filter commands appropriately. It should filter + * channel management and SELECT by DF name commands. + * + * "data" is a const RIL_SIM_APDU * + * "sessionid" field should be ignored. + * + * "response" is a const RIL_SIM_IO_Response * + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SIM_TRANSMIT_APDU_BASIC 114 + +/** + * RIL_REQUEST_SIM_OPEN_CHANNEL + * + * Open a new logical channel and select the given application. This command + * reflects TS 27.007 "open logical channel" operation (+CCHO). + * + * "data" is const char * and set to AID value, See ETSI 102.221 and 101.220. + * + * "response" is int * + * ((int *)data)[0] contains the session id of the logical channel. + * ((int *)data)[1] onwards may optionally contain the select response for the + * open channel command with one byte per integer. + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + * MISSING_RESOURCE + * NO_SUCH_ELEMENT + */ +#define RIL_REQUEST_SIM_OPEN_CHANNEL 115 + +/** + * RIL_REQUEST_SIM_CLOSE_CHANNEL + * + * Close a previously opened logical channel. This command reflects TS 27.007 + * "close logical channel" operation (+CCHC). + * + * "data" is int * + * ((int *)data)[0] is the session id of logical the channel to close. + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SIM_CLOSE_CHANNEL 116 + +/** + * RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL + * + * Exchange APDUs with a UICC over a previously opened logical channel. This + * command reflects TS 27.007 "generic logical channel access" operation + * (+CGLA). The modem should filter channel management and SELECT by DF name + * commands. + * + * "data" is a const RIL_SIM_APDU* + * + * "response" is a const RIL_SIM_IO_Response * + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SIM_TRANSMIT_APDU_CHANNEL 117 + +/** + * RIL_REQUEST_NV_READ_ITEM + * + * Read one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h. + * This is used for device configuration by some CDMA operators. + * + * "data" is a const RIL_NV_ReadItem * + * + * "response" is const char * containing the contents of the NV item + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_NV_READ_ITEM 118 + +/** + * RIL_REQUEST_NV_WRITE_ITEM + * + * Write one of the radio NV items defined in RadioNVItems.java / ril_nv_items.h. + * This is used for device configuration by some CDMA operators. + * + * "data" is a const RIL_NV_WriteItem * + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_NV_WRITE_ITEM 119 + +/** + * RIL_REQUEST_NV_WRITE_CDMA_PRL + * + * Update the CDMA Preferred Roaming List (PRL) in the radio NV storage. + * This is used for device configuration by some CDMA operators. + * + * "data" is a const char * containing the PRL as a byte array + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_NV_WRITE_CDMA_PRL 120 + +/** + * RIL_REQUEST_NV_RESET_CONFIG + * + * Reset the radio NV configuration to the factory state. + * This is used for device configuration by some CDMA operators. + * + * "data" is int * + * ((int *)data)[0] is 1 to reload all NV items + * ((int *)data)[0] is 2 for erase NV reset (SCRTN) + * ((int *)data)[0] is 3 for factory reset (RTN) + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_NV_RESET_CONFIG 121 + + /** RIL_REQUEST_SET_UICC_SUBSCRIPTION + * FIXME This API needs to have more documentation. + * + * Selection/de-selection of a subscription from a SIM card + * "data" is const RIL_SelectUiccSub* + + * + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE (radio resetting) + * GENERIC_FAILURE + * SUBSCRIPTION_NOT_SUPPORTED + * + */ +#define RIL_REQUEST_SET_UICC_SUBSCRIPTION 122 + +/** + * RIL_REQUEST_ALLOW_DATA + * + * Tells the modem whether data calls are allowed or not + * + * "data" is int * + * FIXME slotId and aid will be added. + * ((int *)data)[0] is == 0 to allow data calls + * ((int *)data)[0] is == 1 to disallow data calls + * + * "response" is NULL + * + * Valid errors: + * + * SUCCESS + * RADIO_NOT_AVAILABLE (radio resetting) + * GENERIC_FAILURE + * + */ +#define RIL_REQUEST_ALLOW_DATA 123 + +/** + * RIL_REQUEST_GET_HARDWARE_CONFIG + * + * Request all of the current hardware (modem and sim) associated + * with the RIL. + * + * "data" is NULL + * + * "response" is an array of RIL_HardwareConfig. + */ +#define RIL_REQUEST_GET_HARDWARE_CONFIG 124 + +/** + * RIL_REQUEST_SIM_AUTHENTICATION + * + * Returns the response of SIM Authentication through RIL to a + * challenge request. + * + * "data" Base64 encoded string containing challenge: + * int authContext; P2 value of authentication command, see P2 parameter in + * 3GPP TS 31.102 7.1.2 + * char *authData; the challenge string in Base64 format, see 3GPP + * TS 31.102 7.1.2 + * char *aid; AID value, See ETSI 102.221 8.1 and 101.220 4, + * NULL if no value + * + * "response" Base64 encoded strings containing response: + * int sw1; Status bytes per 3GPP TS 31.102 section 7.3 + * int sw2; + * char *simResponse; Response in Base64 format, see 3GPP TS 31.102 7.1.2 + */ +#define RIL_REQUEST_SIM_AUTHENTICATION 125 + +/** + * RIL_REQUEST_GET_DC_RT_INFO + * + * Requests the Data Connection Real Time Info + * + * "data" is NULL + * + * "response" is the most recent RIL_DcRtInfo + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + * + * See also: RIL_UNSOL_DC_RT_INFO_CHANGED + */ +#define RIL_REQUEST_GET_DC_RT_INFO 126 + +/** + * RIL_REQUEST_SET_DC_RT_INFO_RATE + * + * This is the minimum number of milliseconds between successive + * RIL_UNSOL_DC_RT_INFO_CHANGED messages and defines the highest rate + * at which RIL_UNSOL_DC_RT_INFO_CHANGED's will be sent. A value of + * 0 means send as fast as possible. + * + * "data" The number of milliseconds as an int + * + * "response" is null + * + * Valid errors: + * SUCCESS must not fail + */ +#define RIL_REQUEST_SET_DC_RT_INFO_RATE 127 + +/** + * RIL_REQUEST_SET_DATA_PROFILE + * + * Set data profile in modem + * Modem should erase existed profiles from framework, and apply new profiles + * "data" is an const RIL_DataProfileInfo ** + * "datalen" is count * sizeof(const RIL_DataProfileInfo *) + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE (radio resetting) + * GENERIC_FAILURE + * SUBSCRIPTION_NOT_AVAILABLE + */ +#define RIL_REQUEST_SET_DATA_PROFILE 128 + +/** + * RIL_REQUEST_SHUTDOWN + * + * Device is shutting down. All further commands are ignored + * and RADIO_NOT_AVAILABLE must be returned. + * + * "data" is null + * "response" is NULL + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SHUTDOWN 129 + +/** + * RIL_REQUEST_GET_RADIO_CAPABILITY + * + * Used to get phone radio capablility. + * + * "data" is int * + * ((int *)data)[0] is the phone radio access family defined in + * RadioAccessFamily. It's a bit mask value to represent the support type. + * + * Valid errors: + * SUCCESS + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_GET_RADIO_CAPABILITY 130 + +/** + * RIL_REQUEST_SET_RADIO_CAPABILITY + * + * Used to set the phones radio capability. Be VERY careful + * using this request as it may cause some vendor modems to reset. Because + * of the possible modem reset any RIL commands after this one may not be + * processed. + * + * "data" is the RIL_RadioCapability structure + * + * "response" is the RIL_RadioCapability structure, used to feedback return status + * + * Valid errors: + * SUCCESS means a RIL_UNSOL_RADIO_CAPABILITY will be sent within 30 seconds. + * RADIO_NOT_AVAILABLE + * GENERIC_FAILURE + */ +#define RIL_REQUEST_SET_RADIO_CAPABILITY 131 + /* SAMSUNG REQUESTS */ +#undef RIL_REQUEST_SIM_OPEN_CHANNEL +#undef RIL_REQUEST_SIM_CLOSE_CHANNEL + #define RIL_REQUEST_GET_CELL_BROADCAST_CONFIG 10002 #define RIL_REQUEST_SEND_ENCODED_USSD 10005 @@ -3768,7 +4543,6 @@ typedef struct { */ #define RIL_UNSOL_ON_USSD_REQUEST 1007 - /** * RIL_UNSOL_NITZ_TIME_RECEIVED * @@ -4137,6 +4911,90 @@ typedef struct { */ #define RIL_UNSOL_RESPONSE_IMS_NETWORK_STATE_CHANGED 1037 +/** + * RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED + * + * Indicated when there is a change in subscription status. + * This event will be sent in the following scenarios + * - subscription readiness at modem, which was selected by telephony layer + * - when subscription is deactivated by modem due to UICC card removal + * - When network invalidates the subscription i.e. attach reject due to authentication reject + * + * "data" is const int * + * ((const int *)data)[0] == 0 for Subscription Deactivated + * ((const int *)data)[0] == 1 for Subscription Activated + * + */ +#define RIL_UNSOL_UICC_SUBSCRIPTION_STATUS_CHANGED 1038 + +/** + * RIL_UNSOL_SRVCC_STATE_NOTIFY + * + * Called when Single Radio Voice Call Continuity(SRVCC) + * progress state has changed + * + * "data" is int * + * ((int *)data)[0] is of type const RIL_SrvccState + * + */ + +#define RIL_UNSOL_SRVCC_STATE_NOTIFY 1039 + +/** + * RIL_UNSOL_HARDWARE_CONFIG_CHANGED + * + * Called when the hardware configuration associated with the RILd changes + * + * "data" is an array of RIL_HardwareConfig + * + */ +#define RIL_UNSOL_HARDWARE_CONFIG_CHANGED 1040 + +/** + * RIL_UNSOL_DC_RT_INFO_CHANGED + * + * Sent when the DC_RT_STATE changes but the time + * between these messages must not be less than the + * value set by RIL_REQUEST_SET_DC_RT_RATE. + * + * "data" is the most recent RIL_DcRtInfo + * + */ +#define RIL_UNSOL_DC_RT_INFO_CHANGED 1041 + +/** + * RIL_UNSOL_RADIO_CAPABILITY + * + * Sent when RIL_REQUEST_SET_RADIO_CAPABILITY completes. + * Returns the phone radio capability exactly as + * RIL_REQUEST_GET_RADIO_CAPABILITY and should be the + * same set as sent by RIL_REQUEST_SET_RADIO_CAPABILITY. + * + * "data" is the RIL_RadioCapability structure + */ +#define RIL_UNSOL_RADIO_CAPABILITY 1042 + +/* + * RIL_UNSOL_ON_SS + * + * Called when SS response is received when DIAL/USSD/SS is changed to SS by + * call control. + * + * "data" is const RIL_StkCcUnsolSsResponse * + * + */ +#define RIL_UNSOL_ON_SS 1043 + +/** + * RIL_UNSOL_STK_CC_ALPHA_NOTIFY + * + * Called when there is an ALPHA from UICC during Call Control. + * + * "data" is const char * containing ALPHA string from UICC in UTF-8 format. + * + */ +#define RIL_UNSOL_STK_CC_ALPHA_NOTIFY 1044 + /* SAMSUNG RESPONSE */ #define SAMSUNG_UNSOL_RESPONSE_BASE 11000 @@ -4175,6 +5033,28 @@ typedef struct { /***********************************************************************/ +#if defined(ANDROID_MULTI_SIM) +/** + * RIL_Request Function pointer + * + * @param request is one of RIL_REQUEST_* + * @param data is pointer to data defined for that RIL_REQUEST_* + * data is owned by caller, and should not be modified or freed by callee + * @param t should be used in subsequent call to RIL_onResponse + * @param datalen the length of data + * + */ +typedef void (*RIL_RequestFunc) (int request, void *data, + size_t datalen, RIL_Token t, RIL_SOCKET_ID socket_id); + +/** + * This function should return the current radio state synchronously + */ +typedef RIL_RadioState (*RIL_RadioStateRequest)(RIL_SOCKET_ID socket_id); + +#else +/* Backward compatible */ + /** * RIL_Request Function pointer * @@ -4193,6 +5073,9 @@ typedef void (*RIL_RequestFunc) (int request, void *data, */ typedef RIL_RadioState (*RIL_RadioStateRequest)(); +#endif + + /** * This function returns "1" if the specified RIL_REQUEST code is * supported and 0 if it is not @@ -4248,6 +5131,15 @@ typedef struct { char *password; } RIL_InitialAttachApn; +typedef struct { + int authContext; /* P2 value of authentication command, see P2 parameter in + 3GPP TS 31.102 7.1.2 */ + char *authData; /* the challenge string in Base64 format, see 3GPP + TS 31.102 7.1.2 */ + char *aid; /* AID value, See ETSI 102.221 8.1 and 101.220 4, + NULL if no value. */ +} RIL_SimAuthentication; + #ifdef RIL_SHLIB struct RIL_Env { /** @@ -4264,16 +5156,23 @@ struct RIL_Env { void (*OnRequestComplete)(RIL_Token t, RIL_Errno e, void *response, size_t responselen); +#if defined(ANDROID_MULTI_SIM) /** * "unsolResponse" is one of RIL_UNSOL_RESPONSE_* * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_* * * "data" is owned by caller, and should not be modified or freed by callee */ - - void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, - size_t datalen); - + void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen, RIL_SOCKET_ID socket_id); +#else + /** + * "unsolResponse" is one of RIL_UNSOL_RESPONSE_* + * "data" is pointer to data defined for that RIL_UNSOL_RESPONSE_* + * + * "data" is owned by caller, and should not be modified or freed by callee + */ + void (*OnUnsolicitedResponse)(int unsolResponse, const void *data, size_t datalen); +#endif /** * Call user-specifed "callback" function on on the same thread that * RIL_RequestFunc is called. If "relativeTime" is specified, then it specifies @@ -4324,6 +5223,7 @@ void RIL_register (const RIL_RadioFunctions *callbacks); void RIL_onRequestComplete(RIL_Token t, RIL_Errno e, void *response, size_t responselen); +#if defined(ANDROID_MULTI_SIM) /** * @param unsolResponse is one of RIL_UNSOL_RESPONSE_* * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_* @@ -4332,8 +5232,18 @@ void RIL_onRequestComplete(RIL_Token t, RIL_Errno e, */ void RIL_onUnsolicitedResponse(int unsolResponse, const void *data, - size_t datalen); + size_t datalen, RIL_SOCKET_ID socket_id); +#else +/** + * @param unsolResponse is one of RIL_UNSOL_RESPONSE_* + * @param data is pointer to data defined for that RIL_UNSOL_RESPONSE_* + * "data" is owned by caller, and should not be modified or freed by callee + * @param datalen the length of data in byte + */ +void RIL_onUnsolicitedResponse(int unsolResponse, const void *data, + size_t datalen); +#endif /** * Call user-specifed "callback" function on on the same thread that |