diff options
Diffstat (limited to 'overlay/frameworks/base')
5 files changed, 259 insertions, 59 deletions
diff --git a/overlay/frameworks/base/Keyguard/res/values/config.xml b/overlay/frameworks/base/Keyguard/res/values/config.xml new file mode 100644 index 0000000..cf956e1 --- /dev/null +++ b/overlay/frameworks/base/Keyguard/res/values/config.xml @@ -0,0 +1,28 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +/* +** Copyright 2009, The Android Open Source Project +** +** Licensed under the Apache License, Version 2.0 (the "License"); +** you may not use this file except in compliance with the License. +** You may obtain a copy of the License at +** +** http://www.apache.org/licenses/LICENSE-2.0 +** +** Unless required by applicable law or agreed to in writing, software +** distributed under the License is distributed on an "AS IS" BASIS, +** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +** See the License for the specific language governing permissions and +** limitations under the License. +*/ +--> + +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + + <!-- Disable Lockscreen Notifications dynamic width by default --> + <bool name="config_lnDynamicWidth">true</bool> + + <!-- Allow the menu hard key to be disabled in LockScreen on some devices --> + <bool name="config_disableMenuKeyInLockScreen">true</bool> + +</resources> diff --git a/overlay/frameworks/base/core/res/res/values/config.xml b/overlay/frameworks/base/core/res/res/values/config.xml index c5403cc..63c00c1 100644 --- a/overlay/frameworks/base/core/res/res/values/config.xml +++ b/overlay/frameworks/base/core/res/res/values/config.xml @@ -20,6 +20,119 @@ <!-- These resources are around just to allow their values to be customized for different hardware and product builds. Do not translate. --> <resources> + <!-- Whether a software navigation bar should be shown. NOTE: in the future this may be + autodetected from the Configuration. --> + <bool name="config_showNavigationBar">false</bool> + + <!-- Array of light sensor LUX values to define our levels for auto backlight brightness support. + The N entries of this array define N + 1 zones as follows: + + Zone 0: 0 <= LUX < array[0] + Zone 1: array[0] <= LUX < array[1] + ... + Zone N: array[N - 1] <= LUX < array[N] + Zone N + 1: array[N] <= LUX < infinity + + Must be overridden in platform specific overlays + --> + <integer-array name="config_autoBrightnessLevels"> + <item>150</item> + <item>300</item> + <item>600</item> + <item>1000</item> + <item>3000</item> + <item>8000</item> + <item>15000</item> + <item>28000</item> + <item>41000</item> + <item>54000</item> + <item>67000</item> + <item>80000</item> + <item>100000</item> + <item>150000</item> + <item>200000</item> + </integer-array> + + <!-- Array of output values for LCD backlight corresponding to the LUX values + in the config_autoBrightnessLevels array. This array should have size one greater + than the size of the config_autoBrightnessLevels array. + --> + <integer-array name="config_autoBrightnessLcdBacklightValues"> + <item>20</item> + <item>30</item> + <item>40</item> + <item>50</item> + <item>60</item> + <item>70</item> + <item>80</item> + <item>100</item> + <item>120</item> + <item>140</item> + <item>160</item> + <item>180</item> + <item>200</item> + <item>220</item> + <item>240</item> + <item>255</item> + </integer-array> + + <!-- Array of output values for button backlight corresponding to the LUX values + in the config_autoBrightnessLevels array. This array should have size one greater + than the size of the config_autoBrightnessLevels array. + --> + <integer-array name="config_autoBrightnessButtonBacklightValues"> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + </integer-array> + + <!-- Array of output values for keyboard backlight corresponding to the LUX values + in the config_autoBrightnessLevels array. This array should have size one greater + than the size of the config_autoBrightnessLevels array. + n7100 has no keyboard so all values are zero. + --> + <integer-array name="config_autoBrightnessKeyboardBacklightValues"> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + <item>0</item> + </integer-array> + <!-- XXXXX NOTE THE FOLLOWING RESOURCES USE THE WRONG NAMING CONVENTION. Please don't copy them, copy anything else. --> @@ -80,18 +193,27 @@ <!-- Is the notification LED intrusive? Used to decide if there should be a disable option --> <bool name="config_intrusiveNotificationLed">true</bool> + <!-- Does the notification LED support multiple colors? Used to decide if the user can change the colors --> + <bool name="config_multiColorNotificationLed">true</bool> + <!-- Is the battery LED intrusive? Used to decide if there should be a disable option --> <bool name="config_intrusiveBatteryLed">true</bool> <!-- Does the battery LED support multiple colors? Used to decide if the user can change the colors --> <bool name="config_multiColorBatteryLed">true</bool> + <!-- Default color for notification LED is white. --> + <color name="config_defaultNotificationColor">#ffffffff</color> + <!-- Default LED on time for notification LED in milliseconds. --> <integer name="config_defaultNotificationLedOn">1000</integer> <!-- Default LED off time for notification LED in milliseconds. --> <integer name="config_defaultNotificationLedOff">9000</integer> + <!-- Workaround for devices with broken keyboards + <bool name="config_forceDisableHardwareKeyboard">true</bool> --> + <!-- Allow the menu hard key to be disabled in LockScreen on some devices --> <bool name="config_disableMenuKeyInLockScreen">true</bool> @@ -106,7 +228,7 @@ 32 - Camera 64 - Volume rocker For example, a device with Home, Back and Menu keys would set this - config to 7. --> + config to 7. --> <integer name="config_deviceHardwareKeys">71</integer> <!-- Hardware keys present on the device with the ability to wake, stored as a bit field. @@ -123,15 +245,88 @@ config to 7. --> <integer name="config_deviceHardwareWakeKeys">65</integer> - <!-- Workaround for devices with broken keyboards --> - <bool name="config_forceDisableHardwareKeyboard">true</bool> + <!-- Control the behavior when the user long presses the home button. + 0 - Nothing + 1 - Menu key + 2 - Recent apps view in SystemUI + 3 - Launch assist intent + 4 - Voice Search + 5 - In-app Search + This needs to match the constants in + policy/src/com/android/internal/policy/impl/PhoneWindowManager.java --> + <integer name="config_longPressOnHomeBehavior">3</integer> + + <integer name="config_longPressOnMenuBehavior">2</integer> + + <!-- Control the behavior when the user double-taps the home button. + 0 - Nothing + 1 - Menu + 2 - Recent apps view in SystemUI + 3 - Launch assist intent + 4 - Voice Search + 5 - In-app Search + This needs to match the constants in + policy/src/com/android/internal/policy/impl/PhoneWindowManager.java --> + <integer name="config_doubleTapOnHomeBehavior">0</integer> <!-- Boolean to enable stk functionality on Samsung phones --> <bool name="config_samsung_stk">true</bool> - <!-- Boolean to enable stylus gestures --> - <!-- <bool name="config_stylusGestures">true</bool> --> + <!-- Boolean to enable stylus gestures --> + <bool name="config_stylusGestures">true</bool> + + <!-- Doze mode --> + <string name="config_dozeComponent">com.android.systemui/com.android.systemui.doze.DozeService</string> + <integer name="config_screenBrightnessDoze">20</integer> + <bool name="config_dozeAfterScreenOff">true</bool> + <bool name="config_powerDecoupleInteractiveModeFromDisplay">true</bool> + + <!-- Maximum number of supported users --> + <integer name="config_multiuserMaximumUsers">4</integer> + + <!-- Whether UI for multi user should be shown --> + <bool name="config_enableMultiUserUI">true</bool> + + <!-- Whether WiFi display is supported by this device. + There are many prerequisites for this feature to work correctly. + Here are a few of them: + * The WiFi radio must support WiFi P2P. + * The WiFi radio must support concurrent connections to the WiFi display and + to an access point. + * The Audio Flinger audio_policy.conf file must specify a rule for the "r_submix" + remote submix module. This module is used to record and stream system + audio output to the WiFi display encoder in the media server. + * The remote submix module "audio.r_submix.default" must be installed on the device. + * The device must be provisioned with HDCP keys (for protected content). + --> + <bool name="config_enableWifiDisplay">true</bool> + + <!-- Specifies whether the dreams feature should be supported. + When true, the system will allow the user to configure dreams (screensavers) + to launch when a user activity timeout occurs or the system is told to nap. + When false, the dreams feature will be disabled (this does not affect dozing). + Consider setting this resource to false or disabling dreams by default when a + doze component is specified below since dreaming will supercede dozing and + will prevent the system from entering a low power state until the dream ends. --> + <bool name="config_dreamsSupported">true</bool> + + <!-- If supported, are dreams enabled? (by default) --> + <bool name="config_dreamsEnabledByDefault">false</bool> + + <!-- Enable doze powersaving + <bool name="config_enableAutoPowerModes">true</bool> --> + + <!-- The RadioAccessFamilies supported by the device. + Empty is viewed as "all". Only used on devices which + don't support RIL_REQUEST_GET_RADIO_CAPABILITY + format is UMTS|LTE|... + --> + <string translatable="false" name="config_radio_access_family">GPRS|EDGE|WCDMA</string> + + <!-- Hardware keys on/off option --> + <bool name="config_hwKeysPref">true</bool> - <!-- Workaround for devices with broken keyboards --> - <bool name="config_forceDisableHardwareKeyboard">true</bool> + <!-- Older rotation sensors are not setting event.timestamp correctly. Setting to + true will use SystemClock.elapsedRealtimeNanos() to set timestamp. --> + <bool name="config_useSystemClockforRotationSensor">true</bool> </resources> diff --git a/overlay/frameworks/base/core/res/res/values/pa_config.xml b/overlay/frameworks/base/core/res/res/values/pa_config.xml new file mode 100644 index 0000000..63eba10 --- /dev/null +++ b/overlay/frameworks/base/core/res/res/values/pa_config.xml @@ -0,0 +1,23 @@ +<?xml version="1.0" encoding="utf-8"?> +<!-- +/* +** Copyright (C) 2014 ParanoidAndroid Project +** +** Licensed under the Apache License, Version 2.0 (the "License"); +** you may not use this file except in compliance with the License. +** You may obtain a copy of the License at +** +** http://www.apache.org/licenses/LICENSE-2.0 +** +** Unless required by applicable law or agreed to in writing, software +** distributed under the License is distributed on an "AS IS" BASIS, +** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +** See the License for the specific language governing permissions and +** limitations under the License. +*/ +--> + +<resources xmlns:xliff="urn:oasis:names:tc:xliff:document:1.2"> + <!-- Camera flash + <bool name="config_device_has_camera_flash">true</bool> --> +</resources> diff --git a/overlay/frameworks/base/core/res/res/xml/storage_list.xml b/overlay/frameworks/base/core/res/res/xml/storage_list.xml deleted file mode 100644 index f98fbb0..0000000 --- a/overlay/frameworks/base/core/res/res/xml/storage_list.xml +++ /dev/null @@ -1,52 +0,0 @@ -<?xml version="1.0" encoding="utf-8"?> -<!-- -** -** Copyright 2011, The Android Open Source Project -** -** Licensed under the Apache License, Version 2.0 (the "License") -** you may not use this file except in compliance with the License. -** You may obtain a copy of the License at -** -** http://www.apache.org/licenses/LICENSE-2.0 -** -** Unless required by applicable law or agreed to in writing, software -** distributed under the License is distributed on an "AS IS" BASIS, -** WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -** See the License for the specific language governing permissions and -** limitations under the License. -*/ ---> - -<!-- The <device> element should contain one or more <storage> elements. - Exactly one of these should have the attribute primary="true". - This storage will be the primary external storage and should have mountPoint="/mnt/sdcard". - Each storage should have both a mountPoint and storageDescription attribute. - The following attributes are optional: - - primary: (boolean) this storage is the primary external storage - removable: (boolean) this is removable storage (for example, a real SD card) - emulated: (boolean) the storage is emulated via the FUSE sdcard daemon - mtpReserve: (integer) number of megabytes of storage MTP should reserve for free storage - (used for emulated storage that is shared with system's data partition) - - A storage should not have both emulated and removable set to true ---> - -<StorageList xmlns:android="http://schemas.android.com/apk/res/android"> - <storage android:mountPoint="/storage/sdcard0" - android:storageDescription="@string/storage_internal" - android:primary="true" - android:emulated="true" - android:mtpReserve="100" /> - - <storage android:mountPoint="/storage/sdcard1" - android:storageDescription="@string/storage_sd_card" - android:primary="false" - android:removable="true" - android:allowMassStorage="true" /> - - <storage android:mountPoint="/storage/usbdisk0" - android:storageDescription="@string/storage_usb" - android:primary="false" - android:removable="true" /> -</StorageList>
\ No newline at end of file diff --git a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml index 88851f7..49b1c81 100644 --- a/overlay/frameworks/base/packages/SystemUI/res/values/config.xml +++ b/overlay/frameworks/base/packages/SystemUI/res/values/config.xml @@ -22,5 +22,11 @@ <resources> <!-- Control whether status bar should distinguish HSPA data icon form UMTS data icon on devices --> <bool name="config_hspa_data_distinguishable">true</bool> + + <!-- Doze: does this device support STATE_DOZE and STATE_DOZE_SUSPEND? --> + <bool name="doze_display_state_supported">true</bool> + + <!-- Doze: should the pickup sensor be used as a pulse signal? --> + <bool name="doze_pulse_on_pick_up">true</bool> </resources> |