Replace bash specific INSTALL with the generic one from hello-1.3.18.

1 files changed, 110 insertions, 276 deletions

diff --git a/INSTALL b/INSTALL
index e855e29..50dbe43 100644
--- a/INSTALL
+++ b/INSTALL
@@ -1,153 +1,160 @@
 Basic Installation
 ==================
 
-These are installation instructions for Bash.
+   These are generic installation instructions.
 
-The `configure' shell script attempts to guess correct values for
+   The `configure' shell script attempts to guess correct values for
 various system-dependent variables used during compilation.  It uses
-those values to create a `Makefile' in each directory of the package
-(the top directory, the `builtins' and `doc' directories, and the each
-directory under `lib').  It also creates a `config.h' file containing
-system-dependent definitions.  Finally, it creates a shell script named
-`config.status' that you can run in the future to recreate the current
-configuration, a file `config.cache' that saves the results of its
-tests to speed up reconfiguring, and a file `config.log' containing
-compiler output (useful mainly for debugging `configure').  If at some
-point `config.cache' contains results you don't want to keep, you may
-remove or edit it.
-
-If you need to do unusual things to compile Bash, please try to figure
-out how `configure' could check whether or not to do them, and mail
-diffs or instructions to <bash-maintainers@gnu.org> so they can be
-considered for the next release.
-
-The file `configure.in' is used to create `configure' by a program
-called Autoconf.  You only need `configure.in' if you want to change it
-or regenerate `configure' using a newer version of Autoconf.  If you do
-this, make sure you are using Autoconf version 2.10 or newer.
-
-If you need to change `configure.in' or regenerate `configure', you
-will need to create two files: `_distribution' and `_patchlevel'.
-`_distribution' should contain the major and minor version numbers of
-the Bash distribution, for example `2.01'.  `_patchlevel' should
-contain the patch level of the Bash distribution, `0' for example.  The
-script `support/mkconffiles' has been provided to automate the creation
-of these files.
-
-The simplest way to compile Bash is:
-
-  1. `cd' to the directory containing the source code and type
-     `./configure' to configure Bash for your system.  If you're using
-     `csh' on an old version of System V, you might need to type `sh
-     ./configure' instead to prevent `csh' from trying to execute
+those values to create a `Makefile' in each directory of the package.
+It may also create one or more `.h' files containing system-dependent
+definitions.  Finally, it creates a shell script `config.status' that
+you can run in the future to recreate the current configuration, a file
+`config.cache' that saves the results of its tests to speed up
+reconfiguring, and a file `config.log' containing compiler output
+(useful mainly for debugging `configure').
+
+   If you need to do unusual things to compile the package, please try
+to figure out how `configure' could check whether to do them, and mail
+diffs or instructions to the address given in the `README' so they can
+be considered for the next release.  If at some point `config.cache'
+contains results you don't want to keep, you may remove or edit it.
+
+   The file `configure.in' is used to create `configure' by a program
+called `autoconf'.  You only need `configure.in' if you want to change
+it or regenerate `configure' using a newer version of `autoconf'.
+
+The simplest way to compile this package is:
+
+  1. `cd' to the directory containing the package's source code and type
+     `./configure' to configure the package for your system.  If you're
+     using `csh' on an old version of System V, you might need to type
+     `sh ./configure' instead to prevent `csh' from trying to execute
      `configure' itself.
 
      Running `configure' takes awhile.  While running, it prints some
      messages telling which features it is checking for.
 
-  2. Type `make' to compile Bash and build the `bashbug' bug reporting
-     script.
+  2. Type `make' to compile the package.
 
-  3. Optionally, type `make tests' to run the Bash test suite.
+  3. Optionally, type `make check' to run any self-tests that come with
+     the package.
 
-  4. Type `make install' to install `bash' and `bashbug'.  This will
-     also install the manual pages and Info file.
+  4. Type `make install' to install the programs and any data files and
+     documentation.
 
-You can remove the program binaries and object files from the source
-code directory by typing `make clean'.  To also remove the files that
-`configure' created (so you can compile Bash for a different kind of
-computer), type `make distclean'.
+  5. You can remove the program binaries and object files from the
+     source code directory by typing `make clean'.  To also remove the
+     files that `configure' created (so you can compile the package for
+     a different kind of computer), type `make distclean'.  There is
+     also a `make maintainer-clean' target, but that is intended mainly
+     for the package's developers.  If you use it, you may have to get
+     all sorts of other programs in order to regenerate files that came
+     with the distribution.
 
 Compilers and Options
 =====================
 
-Some systems require unusual options for compilation or linking that
+   Some systems require unusual options for compilation or linking that
 the `configure' script does not know about.  You can give `configure'
 initial values for variables by setting them in the environment.  Using
 a Bourne-compatible shell, you can do that on the command line like
 this:
-
      CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure
 
-On systems that have the `env' program, you can do it like this:
-
+Or on systems that have the `env' program, you can do it like this:
      env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure
 
-The configuration process uses GCC to build Bash if it is available.
-
 Compiling For Multiple Architectures
 ====================================
 
-You can compile Bash for more than one kind of computer at the same
-time, by placing the object files for each architecture in their own
-directory.  To do this, you must use a version of `make' that supports
-the `VPATH' variable, such as GNU `make'.  `cd' to the directory where
-you want the object files and executables to go and run the `configure'
-script from the source directory.  You may need to supply the
-`--srcdir=PATH' argument to tell `configure' where the source files
-are.  `configure' automatically checks for the source code in the
-directory that `configure' is in and in `..'.
-
-If you have to use a `make' that does not supports the `VPATH'
-variable, you can compile Bash for one architecture at a time in the
-source code directory.  After you have installed Bash for one
-architecture, use `make distclean' before reconfiguring for another
+   You can compile the package for more than one kind of computer at the
+same time, by placing the object files for each architecture in their
+own directory.  To do this, you must use a version of `make' that
+supports the `VPATH' variable, such as GNU `make'.  `cd' to the
+directory where you want the object files and executables to go and run
+the `configure' script.  `configure' automatically checks for the
+source code in the directory that `configure' is in and in `..'.
+
+   If you have to use a `make' that does not supports the `VPATH'
+variable, you have to compile the package for one architecture at a time
+in the source code directory.  After you have installed the package for
+one architecture, use `make distclean' before reconfiguring for another
 architecture.
 
-Alternatively, if your system supports symbolic links, you can use the
-`support/mkclone' script to create a build tree which has symbolic
-links back to each file in the source directory.  Here's an example
-that creates a build directory in the current directory from a source
-directory `/usr/gnu/src/bash-2.0':
-
-     bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .
-
-The `mkclone' script requires Bash, so you must have already built Bash
-for at least one architecture before you can create build directories
-for other architectures.
-
 Installation Names
 ==================
 
-By default, `make install' will install into `/usr/local/bin',
-`/usr/local/man', etc.  You can specify an installation prefix other
-than `/usr/local' by giving `configure' the option `--prefix=PATH'.
+   By default, `make install' will install the package's files in
+`/usr/local/bin', `/usr/local/man', etc.  You can specify an
+installation prefix other than `/usr/local' by giving `configure' the
+option `--prefix=PATH'.
 
-You can specify separate installation prefixes for
+   You can specify separate installation prefixes for
 architecture-specific files and architecture-independent files.  If you
-give `configure' the option `--exec-prefix=PATH', `make install' will
-use `PATH' as the prefix for installing programs and libraries.
+give `configure' the option `--exec-prefix=PATH', the package will use
+PATH as the prefix for installing programs and libraries.
 Documentation and other data files will still use the regular prefix.
 
+   In addition, if you use an unusual directory layout you can give
+options like `--bindir=PATH' to specify different values for particular
+kinds of files.  Run `configure --help' for a list of the directories
+you can set and what kinds of files go in them.
+
+   If the package supports it, you can cause programs to be installed
+with an extra prefix or suffix on their names by giving `configure' the
+option `--program-prefix=PREFIX' or `--program-suffix=SUFFIX'.
+
+Optional Features
+=================
+
+   Some packages pay attention to `--enable-FEATURE' options to
+`configure', where FEATURE indicates an optional part of the package.
+They may also pay attention to `--with-PACKAGE' options, where PACKAGE
+is something like `gnu-as' or `x' (for the X Window System).  The
+`README' should mention any `--enable-' and `--with-' options that the
+package recognizes.
+
+   For packages that use the X Window System, `configure' can usually
+find the X include and library files automatically, but if it doesn't,
+you can use the `configure' options `--x-includes=DIR' and
+`--x-libraries=DIR' to specify their locations.
+
 Specifying the System Type
 ==========================
 
-There may be some features `configure' can not figure out
-automatically, but needs to determine by the type of host Bash will run
-on.  Usually `configure' can figure that out, but if it prints a
-message saying it can not guess the host type, give it the
-`--host=TYPE' option.  `TYPE' can either be a short name for the system
+   There may be some features `configure' can not figure out
+automatically, but needs to determine by the type of host the package
+will run on.  Usually `configure' can figure that out, but if it prints
+a message saying it can not guess the host type, give it the
+`--host=TYPE' option.  TYPE can either be a short name for the system
 type, such as `sun4', or a canonical name with three fields:
-`CPU-COMPANY-SYSTEM' (e.g., `sparc-sun-sunos4.1.2').
+     CPU-COMPANY-SYSTEM
 
-See the file `support/config.sub' for the possible values of each field.
+See the file `config.sub' for the possible values of each field.  If
+`config.sub' isn't included in this package, then this package doesn't
+need to know the host type.
+
+   If you are building compiler tools for cross-compiling, you can also
+use the `--target=TYPE' option to select the type of system they will
+produce code for and the `--build=TYPE' option to select the type of
+system on which you are compiling the package.
 
 Sharing Defaults
 ================
 
-If you want to set default values for `configure' scripts to share, you
-can create a site shell script called `config.site' that gives default
-values for variables like `CC', `cache_file', and `prefix'.  `configure'
-looks for `PREFIX/share/config.site' if it exists, then
+   If you want to set default values for `configure' scripts to share,
+you can create a site shell script called `config.site' that gives
+default values for variables like `CC', `cache_file', and `prefix'.
+`configure' looks for `PREFIX/share/config.site' if it exists, then
 `PREFIX/etc/config.site' if it exists.  Or, you can set the
 `CONFIG_SITE' environment variable to the location of the site script.
-A warning: the Bash `configure' looks for a site script, but not all
-`configure' scripts do.
+A warning: not all `configure' scripts look for a site script.
 
 Operation Controls
 ==================
 
-`configure' recognizes the following options to control how it operates.
+   `configure' recognizes the following options to control how it
+operates.
 
 `--cache-file=FILE'
      Use and save the results of the tests in FILE instead of
@@ -160,190 +167,17 @@ Operation Controls
 `--quiet'
 `--silent'
 `-q'
-     Do not print messages saying which checks are being made.
+     Do not print messages saying which checks are being made.  To
+     suppress all normal output, redirect it to `/dev/null' (any error
+     messages will still be shown).
 
 `--srcdir=DIR'
-     Look for the Bash source code in directory DIR.  Usually
+     Look for the package's source code in directory DIR.  Usually
      `configure' can determine that directory automatically.
 
 `--version'
      Print the version of Autoconf used to generate the `configure'
      script, and exit.
 
-`configure' also accepts some other, not widely used, boilerplate
-options.
-
-Optional Features
-=================
+`configure' also accepts some other, not widely useful, options.
 
-The Bash `configure' has a number of `--enable-FEATURE' options, where
-FEATURE indicates an optional part of Bash.  There are also several
-`--with-PACKAGE' options, where PACKAGE is something like `gnu-malloc'
-or `purify'.  To turn off the default use of a package, use
-`--without-PACKAGE'.  To configure Bash without a feature that is
-enabled by default, use `--disable-FEATURE'.
-
-Here is a complete list of the `--enable-' and `--with-' options that
-the Bash `configure' recognizes.
-
-`--with-afs'
-     Define if you are using the Andrew File System from Transarc.
-
-`--with-curses'
-     Use the curses library instead of the termcap library.  This should
-     be supplied if your system has an inadequate or incomplete termcap
-     database.
-
-`--with-glibc-malloc'
-     Use the GNU libc version of `malloc' in `lib/malloc/gmalloc.c'.
-     This is not the version of `malloc' that appears in glibc version
-     2, but a modified version of the `malloc' from glibc version 1.
-     This is somewhat slower than the default `malloc', but wastes less
-     space on a per-allocation basis, and will return memory to the
-     operating system under some circumstances.
-
-`--with-gnu-malloc'
-     Use the GNU version of `malloc' in `lib/malloc/malloc.c'.  This is
-     not the same `malloc' that appears in GNU libc, but an older
-     version derived from the 4.2 BSD `malloc'.  This `malloc' is very
-     fast, but wastes some space on each allocation.  This option is
-     enabled by default.  The `NOTES' file contains a list of systems
-     for which this should be turned off, and `configure' disables this
-     option automatically for a number of systems.
-
-`--with-installed-readline'
-     Define this to make bash link with a locally-installed version of
-     Readline rather than the version in lib/readline.  This works only
-     with readline 4.0 and later versions.
-
-`--with-purify'
-     Define this to use the Purify memory allocation checker from Pure
-     Software.
-
-`--enable-minimal-config'
-     This produces a shell with minimal features, close to the
-     historical Bourne shell.
-
-There are several `--enable-' options that alter how Bash is compiled
-and linked, rather than changing run-time features.
-
-`--enable-profiling'
-     This builds a Bash binary that produces profiling information to be
-     processed by `gprof' each time it is executed.
-
-`--enable-static-link'
-     This causes Bash to be linked statically, if `gcc' is being used.
-     This could be used to build a version to use as root's shell.
-
-The `minimal-config' option can be used to disable all of the following
-options, but it is processed first, so individual options may be
-enabled using `enable-FEATURE'.
-
-All of the following options except for `disabled-builtins' and
-`usg-echo-default' are enabled by default, unless the operating system
-does not provide the necessary support.
-
-`--enable-alias'
-     Allow alias expansion and include the `alias' and `unalias'
-     builtins (*note Aliases::.).
-
-`--enable-arith-for-command'
-     Include support for the alternate form of the `for' command that
-     behaves like the C language `for' statement (*note Looping
-     Constructs::.).
-
-`--enable-array-variables'
-     Include support for one-dimensional array shell variables (*note
-     Arrays::.).
-
-`--enable-bang-history'
-     Include support for `csh'-like history substitution (*note History
-     Interaction::.).
-
-`--enable-brace-expansion'
-     Include `csh'-like brace expansion ( `b{a,b}c' ==> `bac bbc' ).
-     See *Note Brace Expansion::, for a complete description.
-
-`--enable-command-timing'
-     Include support for recognizing `time' as a reserved word and for
-     displaying timing statistics for the pipeline following `time'.
-     This allows pipelines as well as shell builtins and functions to
-     be timed.
-
-`--enable-cond-command'
-     Include support for the `[[' conditional command (*note
-     Conditional Constructs::.).
-
-`--enable-directory-stack'
-     Include support for a `csh'-like directory stack and the `pushd',
-     `popd', and `dirs' builtins (*note The Directory Stack::.).
-
-`--enable-disabled-builtins'
-     Allow builtin commands to be invoked via `builtin xxx' even after
-     `xxx' has been disabled using `enable -n xxx'.  See *Note Bash
-     Builtins::, for details of the `builtin' and `enable' builtin
-     commands.
-
-`--enable-dparen-arithmetic'
-     Include support for the `((...))' command (*note Conditional
-     Constructs::.).
-
-`--enable-extended-glob'
-     Include support for the extended pattern matching features
-     described above under *Note Pattern Matching::.
-
-`--enable-help-builtin'
-     Include the `help' builtin, which displays help on shell builtins
-     and variables.
-
-`--enable-history'
-     Include command history and the `fc' and `history' builtin
-     commands.
-
-`--enable-job-control'
-     This enables the job control features (*note Job Control::.), if
-     the operating system supports them.
-
-`--enable-net-redirections'
-     This enables the special handling of filenames of the form
-     `/dev/tcp/HOST/PORT' and `/dev/udp/HOST/PORT' when used in
-     redirections (*note Redirections::.).
-
-`--enable-process-substitution'
-     This enables process substitution (*note Process Substitution::.)
-     if the operating system provides the necessary support.
-
-`--enable-prompt-string-decoding'
-     Turn on the interpretation of a number of backslash-escaped
-     characters in the `$PS1', `$PS2', `$PS3', and `$PS4' prompt
-     strings.  See *Note Printing a Prompt::, for a complete list of
-     prompt string escape sequences.
-
-`--enable-progcomp'
-     Enable the programmable completion facilities (*note Programmable
-     Completion::.).  If Readline is not enabled, this option has no
-     effect.
-
-`--enable-readline'
-     Include support for command-line editing and history with the Bash
-     version of the Readline library (*note Command Line Editing::.).
-
-`--enable-restricted'
-     Include support for a "restricted shell".  If this is enabled,
-     Bash, when called as `rbash', enters a restricted mode.  See *Note
-     The Restricted Shell::, for a description of restricted mode.
-
-`--enable-select'
-     Include the `select' builtin, which allows the generation of simple
-     menus (*note Conditional Constructs::.).
-
-`--enable-usg-echo-default'
-     Make the `echo' builtin expand backslash-escaped characters by
-     default, without requiring the `-e' option.  This makes the Bash
-     `echo' behave more like the System V version.
-
-The file `config-top.h' contains C Preprocessor `#define' statements
-for options which are not settable from `configure'.  Some of these are
-not meant to be changed; beware of the consequences if you do.  Read
-the comments associated with each definition for more information about
-its effect.