Update from libtool-2.2.8, with modifications.

1 files changed, 912 insertions, 704 deletions

diff --git a/build-aux/ltmain.sh b/build-aux/ltmain.sh
index 0dd6f3a..be43f41 100644
--- a/build-aux/ltmain.sh
+++ b/build-aux/ltmain.sh
@@ -1,9 +1,10 @@
 # Generated from ltmain.m4sh.
 
-# ltmain.sh (GNU libtool) 2.2.6
+# libtool (GNU libtool) 2.2.8
 # Written by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996
 
-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006, 2007 2008 Free Software Foundation, Inc.
+# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005, 2006,
+# 2007, 2008, 2009, 2010 Free Software Foundation, Inc.
 # This is free software; see the source for copying conditions.  There is NO
 # warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
 
@@ -32,50 +33,54 @@
 #
 # Provide generalized library-building support services.
 #
-#     --config             show all configuration variables
-#     --debug              enable verbose shell tracing
-# -n, --dry-run            display commands without modifying any files
-#     --features           display basic configuration information and exit
-#     --mode=MODE          use operation mode MODE
-#     --preserve-dup-deps  don't remove duplicate dependency libraries
-#     --quiet, --silent    don't print informational messages
-#     --tag=TAG            use configuration variables from tag TAG
-# -v, --verbose            print informational messages (default)
-#     --version            print version information
-# -h, --help               print short or long help message
+#       --config             show all configuration variables
+#       --debug              enable verbose shell tracing
+#   -n, --dry-run            display commands without modifying any files
+#       --features           display basic configuration information and exit
+#       --mode=MODE          use operation mode MODE
+#       --preserve-dup-deps  don't remove duplicate dependency libraries
+#       --quiet, --silent    don't print informational messages
+#       --no-quiet, --no-silent
+#                            print informational messages (default)
+#       --tag=TAG            use configuration variables from tag TAG
+#   -v, --verbose            print more informational messages than default
+#       --no-verbose         don't print the extra informational messages
+#       --version            print version information
+#   -h, --help, --help-all   print short, long, or detailed help message
 #
 # MODE must be one of the following:
 #
-#       clean              remove files from the build directory
-#       compile            compile a source file into a libtool object
-#       execute            automatically set library path, then run a program
-#       finish             complete the installation of libtool libraries
-#       install            install libraries or executables
-#       link               create a library or an executable
-#       uninstall          remove libraries from an installed directory
+#         clean              remove files from the build directory
+#         compile            compile a source file into a libtool object
+#         execute            automatically set library path, then run a program
+#         finish             complete the installation of libtool libraries
+#         install            install libraries or executables
+#         link               create a library or an executable
+#         uninstall          remove libraries from an installed directory
 #
-# MODE-ARGS vary depending on the MODE.
+# MODE-ARGS vary depending on the MODE.  When passed as first option,
+# `--mode=MODE' may be abbreviated as `MODE' or a unique abbreviation of that.
 # Try `$progname --help --mode=MODE' for a more detailed description of MODE.
 #
 # When reporting a bug, please describe a test case to reproduce it and
 # include the following information:
 #
-#       host-triplet:	$host
-#       shell:		$SHELL
-#       compiler:		$LTCC
-#       compiler flags:		$LTCFLAGS
-#       linker:		$LD (gnu? $with_gnu_ld)
-#       $progname:		(GNU libtool) 2.2.6
-#       automake:		$automake_version
-#       autoconf:		$autoconf_version
+#         host-triplet:	$host
+#         shell:		$SHELL
+#         compiler:		$LTCC
+#         compiler flags:		$LTCFLAGS
+#         linker:		$LD (gnu? $with_gnu_ld)
+#         $progname:	(GNU libtool) 2.2.8
+#         automake:	$automake_version
+#         autoconf:	$autoconf_version
 #
 # Report bugs to <bug-libtool@gnu.org>.
 
-PROGRAM=ltmain.sh
+PROGRAM=libtool
 PACKAGE=libtool
-VERSION=2.2.6
+VERSION=2.2.8
 TIMESTAMP=""
-package_revision=1.3012
+package_revision=1.3169
 
 # Be Bourne compatible
 if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then
@@ -91,10 +96,15 @@ fi
 BIN_SH=xpg4; export BIN_SH # for Tru64
 DUALCASE=1; export DUALCASE # for MKS sh
 
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+$1
+_LTECHO_EOF'
+}
+
 # NLS nuisances: We save the old values to restore during execute mode.
-# Only set LANG and LC_ALL to C if already set.
-# These must not be set unconditionally because not all systems understand
-# e.g. LANG=C (notably SCO).
 lt_user_locale=
 lt_safe_locale=
 for lt_var in LANG LANGUAGE LC_ALL LC_CTYPE LC_COLLATE LC_MESSAGES
@@ -107,6 +117,9 @@ do
 	  lt_safe_locale=\"$lt_var=C; \$lt_safe_locale\"
 	fi"
 done
+LC_ALL=C
+LANGUAGE=C
+export LANGUAGE LC_ALL
 
 $lt_unset CDPATH
 
@@ -114,17 +127,27 @@ $lt_unset CDPATH
 
 
 
+
+# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
+# is ksh but when the shell is invoked as "sh" and the current value of
+# the _XPG environment variable is not equal to 1 (one), the special
+# positional parameter $0, within a function call, is the name of the
+# function.
+progpath="$0"
+
+
+
 : ${CP="cp -f"}
-: ${ECHO="echo"}
-: ${EGREP="/usr/bin/grep -E"}
-: ${FGREP="/usr/bin/grep -F"}
-: ${GREP="/usr/bin/grep"}
+test "${ECHO+set}" = set || ECHO=${as_echo-'printf %s\n'}
+: ${EGREP="grep -E"}
+: ${FGREP="grep -F"}
+: ${GREP="grep"}
 : ${LN_S="ln -s"}
 : ${MAKE="make"}
 : ${MKDIR="mkdir"}
 : ${MV="mv -f"}
 : ${RM="rm -f"}
-: ${SED="/opt/local/bin/gsed"}
+: ${SED="sed"}
 : ${SHELL="${CONFIG_SHELL-/bin/sh}"}
 : ${Xsed="$SED -e 1s/^X//"}
 
@@ -159,32 +182,168 @@ basename="s,^.*/,,"
 func_dirname_and_basename ()
 {
   # Extract subdirectory from the argument.
-  func_dirname_result=`$ECHO "X${1}" | $Xsed -e "$dirname"`
+  func_dirname_result=`$ECHO "${1}" | $SED -e "$dirname"`
   if test "X$func_dirname_result" = "X${1}"; then
     func_dirname_result="${3}"
   else
     func_dirname_result="$func_dirname_result${2}"
   fi
-  func_basename_result=`$ECHO "X${1}" | $Xsed -e "$basename"`
+  func_basename_result=`$ECHO "${1}" | $SED -e "$basename"`
 }
 
 # Generated shell functions inserted here.
 
-# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh
-# is ksh but when the shell is invoked as "sh" and the current value of
-# the _XPG environment variable is not equal to 1 (one), the special
-# positional parameter $0, within a function call, is the name of the
-# function.
-progpath="$0"
+# These SED scripts presuppose an absolute path with a trailing slash.
+pathcar='s,^/\([^/]*\).*$,\1,'
+pathcdr='s,^/[^/]*,,'
+removedotparts=':dotsl
+		s@/\./@/@g
+		t dotsl
+		s,/\.$,/,'
+collapseslashes='s@/\{1,\}@/@g'
+finalslash='s,/*$,/,'
+
+# func_normal_abspath PATH
+# Remove doubled-up and trailing slashes, "." path components,
+# and cancel out any ".." path components in PATH after making
+# it an absolute path.
+#             value returned in "$func_normal_abspath_result"
+func_normal_abspath ()
+{
+  # Start from root dir and reassemble the path.
+  func_normal_abspath_result=
+  func_normal_abspath_tpath=$1
+  func_normal_abspath_altnamespace=
+  case $func_normal_abspath_tpath in
+    "")
+      # Empty path, that just means $cwd.
+      func_stripname '' '/' "`pwd`"
+      func_normal_abspath_result=$func_stripname_result
+      return
+    ;;
+    # The next three entries are used to spot a run of precisely
+    # two leading slashes without using negated character classes;
+    # we take advantage of case's first-match behaviour.
+    ///*)
+      # Unusual form of absolute path, do nothing.
+    ;;
+    //*)
+      # Not necessarily an ordinary path; POSIX reserves leading '//'
+      # and for example Cygwin uses it to access remote file shares
+      # over CIFS/SMB, so we conserve a leading double slash if found.
+      func_normal_abspath_altnamespace=/
+    ;;
+    /*)
+      # Absolute path, do nothing.
+    ;;
+    *)
+      # Relative path, prepend $cwd.
+      func_normal_abspath_tpath=`pwd`/$func_normal_abspath_tpath
+    ;;
+  esac
+  # Cancel out all the simple stuff to save iterations.  We also want
+  # the path to end with a slash for ease of parsing, so make sure
+  # there is one (and only one) here.
+  func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$removedotparts" -e "$collapseslashes" -e "$finalslash"`
+  while :; do
+    # Processed it all yet?
+    if test "$func_normal_abspath_tpath" = / ; then
+      # If we ascended to the root using ".." the result may be empty now.
+      if test -z "$func_normal_abspath_result" ; then
+        func_normal_abspath_result=/
+      fi
+      break
+    fi
+    func_normal_abspath_tcomponent=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcar"`
+    func_normal_abspath_tpath=`$ECHO "$func_normal_abspath_tpath" | $SED \
+        -e "$pathcdr"`
+    # Figure out what to do with it
+    case $func_normal_abspath_tcomponent in
+      "")
+        # Trailing empty path component, ignore it.
+      ;;
+      ..)
+        # Parent dir; strip last assembled component from result.
+        func_dirname "$func_normal_abspath_result"
+        func_normal_abspath_result=$func_dirname_result
+      ;;
+      *)
+        # Actual path component, append it.
+        func_normal_abspath_result=$func_normal_abspath_result/$func_normal_abspath_tcomponent
+      ;;
+    esac
+  done
+  # Restore leading double-slash if one was found on entry.
+  func_normal_abspath_result=$func_normal_abspath_altnamespace$func_normal_abspath_result
+}
+
+# func_relative_path SRCDIR DSTDIR
+# generates a relative path from SRCDIR to DSTDIR, with a trailing
+# slash if non-empty, suitable for immediately appending a filename
+# without needing to append a separator.
+#             value returned in "$func_relative_path_result"
+func_relative_path ()
+{
+  func_relative_path_result=
+  func_normal_abspath "$1"
+  func_relative_path_tlibdir=$func_normal_abspath_result
+  func_normal_abspath "$2"
+  func_relative_path_tbindir=$func_normal_abspath_result
+
+  # Ascend the tree starting from libdir
+  while :; do
+    # check if we have found a prefix of bindir
+    case $func_relative_path_tbindir in
+      $func_relative_path_tlibdir)
+        # found an exact match
+        func_relative_path_tcancelled=
+        break
+        ;;
+      $func_relative_path_tlibdir*)
+        # found a matching prefix
+        func_stripname "$func_relative_path_tlibdir" '' "$func_relative_path_tbindir"
+        func_relative_path_tcancelled=$func_stripname_result
+        if test -z "$func_relative_path_result"; then
+          func_relative_path_result=.
+        fi
+        break
+        ;;
+      *)
+        func_dirname $func_relative_path_tlibdir
+        func_relative_path_tlibdir=${func_dirname_result}
+        if test "x$func_relative_path_tlibdir" = x ; then
+          # Have to descend all the way to the root!
+          func_relative_path_result=../$func_relative_path_result
+          func_relative_path_tcancelled=$func_relative_path_tbindir
+          break
+        fi
+        func_relative_path_result=../$func_relative_path_result
+        ;;
+    esac
+  done
+
+  # Now calculate path; take care to avoid doubling-up slashes.
+  func_stripname '' '/' "$func_relative_path_result"
+  func_relative_path_result=$func_stripname_result
+  func_stripname '/' '/' "$func_relative_path_tcancelled"
+  if test "x$func_stripname_result" != x ; then
+    func_relative_path_result=${func_relative_path_result}/${func_stripname_result}
+  fi
+
+  # Normalisation. If bindir is libdir, return empty string,
+  # else relative path ending with a slash; either way, target
+  # file name can be directly appended.
+  if test ! -z "$func_relative_path_result"; then
+    func_stripname './' '' "$func_relative_path_result/"
+    func_relative_path_result=$func_stripname_result
+  fi
+}
 
 # The name of this program:
-# In the unlikely event $progname began with a '-', it would play havoc with
-# func_echo (imagine progname=-n), so we prepend ./ in that case:
 func_dirname_and_basename "$progpath"
 progname=$func_basename_result
-case $progname in
-  -*) progname=./$progname ;;
-esac
 
 # Make sure we have an absolute path for reexecution:
 case $progpath in
@@ -258,6 +417,13 @@ func_verbose ()
     :
 }
 
+# func_echo_all arg...
+# Invoke $ECHO with all args, space-separated.
+func_echo_all ()
+{
+    $ECHO "$*"
+}
+
 # func_error arg...
 # Echo program name prefixed message to standard error.
 func_error ()
@@ -326,9 +492,9 @@ func_mkdir_p ()
         case $my_directory_path in */*) ;; *) break ;; esac
 
         # ...otherwise throw away the child directory and loop
-        my_directory_path=`$ECHO "X$my_directory_path" | $Xsed -e "$dirname"`
+        my_directory_path=`$ECHO "$my_directory_path" | $SED -e "$dirname"`
       done
-      my_dir_list=`$ECHO "X$my_dir_list" | $Xsed -e 's,:*$,,'`
+      my_dir_list=`$ECHO "$my_dir_list" | $SED 's,:*$,,'`
 
       save_mkdir_p_IFS="$IFS"; IFS=':'
       for my_dir in $my_dir_list; do
@@ -378,7 +544,7 @@ func_mktempdir ()
         func_fatal_error "cannot create temporary directory \`$my_tmpdir'"
     fi
 
-    $ECHO "X$my_tmpdir" | $Xsed
+    $ECHO "$my_tmpdir"
 }
 
 
@@ -392,7 +558,7 @@ func_quote_for_eval ()
 {
     case $1 in
       *[\\\`\"\$]*)
-	func_quote_for_eval_unquoted_result=`$ECHO "X$1" | $Xsed -e "$sed_quote_subst"` ;;
+	func_quote_for_eval_unquoted_result=`$ECHO "$1" | $SED "$sed_quote_subst"` ;;
       *)
         func_quote_for_eval_unquoted_result="$1" ;;
     esac
@@ -419,7 +585,7 @@ func_quote_for_expand ()
 {
     case $1 in
       *[\\\`\"]*)
-	my_arg=`$ECHO "X$1" | $Xsed \
+	my_arg=`$ECHO "$1" | $SED \
 	    -e "$double_quote_subst" -e "$sed_double_backslash"` ;;
       *)
         my_arg="$1" ;;
@@ -490,13 +656,19 @@ func_show_eval_locale ()
 
 
 
-
-
 # func_version
 # Echo version message to standard output and exit.
 func_version ()
 {
-    $SED -n '/^# '$PROGRAM' (GNU /,/# warranty; / {
+    $SED -n '/(C)/!b go
+	:more
+	/\./!{
+	  N
+	  s/\n# //
+	  b more
+	}
+	:go
+	/^# '$PROGRAM' (GNU /,/# warranty; / {
         s/^# //
 	s/^# *$//
         s/\((C)\)[ 0-9,-]*\( [1-9][0-9]*\)/\1\2/
@@ -509,19 +681,20 @@ func_version ()
 # Echo short help message to standard output and exit.
 func_usage ()
 {
-    $SED -n '/^# Usage:/,/# -h/ {
+    $SED -n '/^# Usage:/,/^#  *.*--help/ {
         s/^# //
 	s/^# *$//
 	s/\$progname/'$progname'/
 	p
     }' < "$progpath"
-    $ECHO
+    echo
     $ECHO "run \`$progname --help | more' for full usage"
     exit $?
 }
 
-# func_help
-# Echo long help message to standard output and exit.
+# func_help [NOEXIT]
+# Echo long help message to standard output and exit,
+# unless 'noexit' is passed as argument.
 func_help ()
 {
     $SED -n '/^# Usage:/,/# Report bugs to/ {
@@ -538,7 +711,10 @@ func_help ()
 	s/\$autoconf_version/'"`(autoconf --version) 2>/dev/null |$SED 1q`"'/
 	p
      }' < "$progpath"
-    exit $?
+    ret=$?
+    if test -z "$1"; then
+      exit $ret
+    fi
 }
 
 # func_missing_arg argname
@@ -546,7 +722,7 @@ func_help ()
 # exit_cmd.
 func_missing_arg ()
 {
-    func_error "missing argument for $1"
+    func_error "missing argument for $1."
     exit_cmd=exit
 }
 
@@ -556,29 +732,6 @@ exit_cmd=:
 
 
 
-# Check that we have a working $ECHO.
-if test "X$1" = X--no-reexec; then
-  # Discard the --no-reexec flag, and continue.
-  shift
-elif test "X$1" = X--fallback-echo; then
-  # Avoid inline document here, it may be left over
-  :
-elif test "X`{ $ECHO '\t'; } 2>/dev/null`" = 'X\t'; then
-  # Yippee, $ECHO works!
-  :
-else
-  # Restart under the correct shell, and then maybe $ECHO will work.
-  exec $SHELL "$progpath" --no-reexec ${1+"$@"}
-fi
-
-if test "X$1" = X--fallback-echo; then
-  # used as fallback echo
-  shift
-  cat <<EOF
-$*
-EOF
-  exit $EXIT_SUCCESS
-fi
 
 magic="%%%MAGIC variable%%%"
 magic_exe="%%%MAGIC EXE variable%%%"
@@ -636,16 +789,16 @@ func_config ()
 # Display the features supported by this script.
 func_features ()
 {
-    $ECHO "host: $host"
+    echo "host: $host"
     if test "$build_libtool_libs" = yes; then
-      $ECHO "enable shared libraries"
+      echo "enable shared libraries"
     else
-      $ECHO "disable shared libraries"
+      echo "disable shared libraries"
     fi
     if test "$build_old_libs" = yes; then
-      $ECHO "enable static libraries"
+      echo "enable static libraries"
     else
-      $ECHO "disable static libraries"
+      echo "disable static libraries"
     fi
 
     exit $?
@@ -772,10 +925,21 @@ func_enable_tag ()
 
       --quiet|--silent)	preserve_args="$preserve_args $opt"
 			opt_silent=:
+			opt_verbose=false
+			;;
+
+      --no-quiet|--no-silent)
+			preserve_args="$preserve_args $opt"
+			opt_silent=false
 			;;
 
       --verbose| -v)	preserve_args="$preserve_args $opt"
 			opt_silent=false
+			opt_verbose=:
+			;;
+
+      --no-verbose)	preserve_args="$preserve_args $opt"
+			opt_verbose=false
 			;;
 
       --tag)		test "$#" -eq 0 && func_missing_arg "$opt" && break
@@ -793,6 +957,7 @@ func_enable_tag ()
 
       -\?|-h)		func_usage					;;
       --help)		opt_help=:					;;
+      --help-all)	opt_help=': help-all'				;;
       --version)	func_version					;;
 
       -*)		func_fatal_help "unrecognized option \`$opt'"	;;
@@ -1016,10 +1181,13 @@ func_infer_tag ()
         func_quote_for_eval "$arg"
 	CC_quoted="$CC_quoted $func_quote_for_eval_result"
       done
+      CC_expanded=`func_echo_all $CC`
+      CC_quoted_expanded=`func_echo_all $CC_quoted`
       case $@ in
       # Blanks in the command may have been stripped by the calling shell,
       # but not from the CC environment variable when configure was run.
-      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*) ;;
+      " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+      " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*) ;;
       # Blanks at the start of $base_compile will cause this to fail
       # if we don't check for them as well.
       *)
@@ -1033,8 +1201,11 @@ func_infer_tag ()
 	      func_quote_for_eval "$arg"
 	      CC_quoted="$CC_quoted $func_quote_for_eval_result"
 	    done
+	    CC_expanded=`func_echo_all $CC`
+	    CC_quoted_expanded=`func_echo_all $CC_quoted`
 	    case "$@ " in
-	      " $CC "* | "$CC "* | " `$ECHO $CC` "* | "`$ECHO $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$ECHO $CC_quoted` "* | "`$ECHO $CC_quoted` "*)
+	    " $CC "* | "$CC "* | " $CC_expanded "* | "$CC_expanded "* | \
+	    " $CC_quoted"* | "$CC_quoted "* | " $CC_quoted_expanded "* | "$CC_quoted_expanded "*)
 	      # The compiler in the base compile command matches
 	      # the one in the tagged configuration.
 	      # Assume this is the tagged configuration we want.
@@ -1213,7 +1384,7 @@ func_mode_compile ()
     *.[cCFSifmso] | \
     *.ada | *.adb | *.ads | *.asm | \
     *.c++ | *.cc | *.ii | *.class | *.cpp | *.cxx | \
-    *.[fF][09]? | *.for | *.java | *.obj | *.sx)
+    *.[fF][09]? | *.for | *.java | *.obj | *.sx | *.cu | *.cup)
       func_xform "$libobj"
       libobj=$func_xform_result
       ;;
@@ -1288,7 +1459,7 @@ func_mode_compile ()
     # Calculate the filename of the output object if compiler does
     # not support -o with -c
     if test "$compiler_c_o" = no; then
-      output_obj=`$ECHO "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext}
+      output_obj=`$ECHO "$srcfile" | $SED 's%^.*/%%; s%\.[^.]*$%%'`.${objext}
       lockfile="$output_obj.lock"
     else
       output_obj=
@@ -1445,7 +1616,7 @@ compiler."
 }
 
 $opt_help || {
-test "$mode" = compile && func_mode_compile ${1+"$@"}
+  test "$mode" = compile && func_mode_compile ${1+"$@"}
 }
 
 func_mode_help ()
@@ -1482,10 +1653,11 @@ This mode accepts the following additional options:
 
   -o OUTPUT-FILE    set the output file name to OUTPUT-FILE
   -no-suppress      do not suppress compiler output for multiple passes
-  -prefer-pic       try to building PIC objects only
-  -prefer-non-pic   try to building non-PIC objects only
+  -prefer-pic       try to build PIC objects only
+  -prefer-non-pic   try to build non-PIC objects only
   -shared           do not build a \`.o' file suitable for static linking
   -static           only build a \`.o' file suitable for static linking
+  -Wc,FLAG          pass FLAG directly to the compiler
 
 COMPILE-COMMAND is a command to be used in creating a \`standard' object file
 from the given SOURCEFILE.
@@ -1538,7 +1710,7 @@ either the \`install' or \`cp' program.
 
 The following components of INSTALL-COMMAND are treated specially:
 
-  -inst-prefix PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
+  -inst-prefix-dir PREFIX-DIR  Use PREFIX-DIR as a staging area for installation
 
 The rest of the components are interpreted as arguments to that command (only
 BSD-compatible install options are recognized)."
@@ -1558,6 +1730,8 @@ The following components of LINK-COMMAND are treated specially:
 
   -all-static       do not do any dynamic linking at all
   -avoid-version    do not add a version suffix if possible
+  -bindir BINDIR    specify path to binaries directory (for systems where
+                    libraries must be found in the PATH setting at runtime)
   -dlopen FILE      \`-dlpreopen' FILE if it cannot be dlopened at runtime
   -dlpreopen FILE   link in FILE and add its symbols to lt_preloaded_symbols
   -export-dynamic   allow symbols from OUTPUT-FILE to be resolved with dlsym(3)
@@ -1586,6 +1760,11 @@ The following components of LINK-COMMAND are treated specially:
   -version-info CURRENT[:REVISION[:AGE]]
                     specify library version info [each variable defaults to 0]
   -weak LIBNAME     declare that the target provides the LIBNAME interface
+  -Wc,FLAG
+  -Xcompiler FLAG   pass linker-specific FLAG directly to the compiler
+  -Wl,FLAG
+  -Xlinker FLAG     pass linker-specific FLAG directly to the linker
+  -XCClinker FLAG   pass link-specific FLAG to the compiler driver (CC)
 
 All other options (arguments beginning with \`-') are ignored.
 
@@ -1623,14 +1802,40 @@ Otherwise, only FILE itself is deleted using RM."
         ;;
     esac
 
-    $ECHO
+    echo
     $ECHO "Try \`$progname --help' for more information about other modes."
-
-    exit $?
 }
 
-  # Now that we've collected a possible --mode arg, show help if necessary
-  $opt_help && func_mode_help
+# Now that we've collected a possible --mode arg, show help if necessary
+if $opt_help; then
+  if test "$opt_help" = :; then
+    func_mode_help
+  else
+    {
+      func_help noexit
+      for mode in compile link execute install finish uninstall clean; do
+	func_mode_help
+      done
+    } | sed -n '1p; 2,$s/^Usage:/  or: /p'
+    {
+      func_help noexit
+      for mode in compile link execute install finish uninstall clean; do
+	echo
+	func_mode_help
+      done
+    } |
+    sed '1d
+      /^When reporting/,/^Report/{
+	H
+	d
+      }
+      $x
+      /information about other modes/d
+      /more detailed .*MODE/d
+      s/^Usage:.*--mode=\([^ ]*\) .*/Description of \1 mode:/'
+  fi
+  exit $?
+fi
 
 
 # func_mode_execute arg...
@@ -1712,7 +1917,7 @@ func_mode_execute ()
     for file
     do
       case $file in
-      -*) ;;
+      -* | *.la | *.lo ) ;;
       *)
 	# Do a test to see if this is really a libtool program.
 	if func_ltwrapper_script_p "$file"; then
@@ -1754,7 +1959,7 @@ func_mode_execute ()
       # Display what would be done.
       if test -n "$shlibpath_var"; then
 	eval "\$ECHO \"\$shlibpath_var=\$$shlibpath_var\""
-	$ECHO "export $shlibpath_var"
+	echo "export $shlibpath_var"
       fi
       $ECHO "$cmd$args"
       exit $EXIT_SUCCESS
@@ -1795,23 +2000,23 @@ func_mode_finish ()
     # Exit here if they wanted silent mode.
     $opt_silent && exit $EXIT_SUCCESS
 
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
-    $ECHO "Libraries have been installed in:"
+    echo "----------------------------------------------------------------------"
+    echo "Libraries have been installed in:"
     for libdir in $libdirs; do
       $ECHO "   $libdir"
     done
-    $ECHO
-    $ECHO "If you ever happen to want to link against installed libraries"
-    $ECHO "in a given directory, LIBDIR, you must either use libtool, and"
-    $ECHO "specify the full pathname of the library, or use the \`-LLIBDIR'"
-    $ECHO "flag during linking and do at least one of the following:"
+    echo
+    echo "If you ever happen to want to link against installed libraries"
+    echo "in a given directory, LIBDIR, you must either use libtool, and"
+    echo "specify the full pathname of the library, or use the \`-LLIBDIR'"
+    echo "flag during linking and do at least one of the following:"
     if test -n "$shlibpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$shlibpath_var' environment variable"
-      $ECHO "     during execution"
+      echo "   - add LIBDIR to the \`$shlibpath_var' environment variable"
+      echo "     during execution"
     fi
     if test -n "$runpath_var"; then
-      $ECHO "   - add LIBDIR to the \`$runpath_var' environment variable"
-      $ECHO "     during linking"
+      echo "   - add LIBDIR to the \`$runpath_var' environment variable"
+      echo "     during linking"
     fi
     if test -n "$hardcode_libdir_flag_spec"; then
       libdir=LIBDIR
@@ -1823,21 +2028,21 @@ func_mode_finish ()
       $ECHO "   - have your system administrator run these commands:$admincmds"
     fi
     if test -f /etc/ld.so.conf; then
-      $ECHO "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
+      echo "   - have your system administrator add LIBDIR to \`/etc/ld.so.conf'"
     fi
-    $ECHO
+    echo
 
-    $ECHO "See any operating system documentation about shared libraries for"
+    echo "See any operating system documentation about shared libraries for"
     case $host in
       solaris2.[6789]|solaris2.1[0-9])
-        $ECHO "more information, such as the ld(1), crle(1) and ld.so(8) manual"
-	$ECHO "pages."
+        echo "more information, such as the ld(1), crle(1) and ld.so(8) manual"
+	echo "pages."
 	;;
       *)
-        $ECHO "more information, such as the ld(1) and ld.so(8) manual pages."
+        echo "more information, such as the ld(1) and ld.so(8) manual pages."
         ;;
     esac
-    $ECHO "X----------------------------------------------------------------------" | $Xsed
+    echo "----------------------------------------------------------------------"
     exit $EXIT_SUCCESS
 }
 
@@ -1852,7 +2057,7 @@ func_mode_install ()
     # install_prog (especially on Windows NT).
     if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh ||
        # Allow the use of GNU shtool's install command.
-       $ECHO "X$nonopt" | $GREP shtool >/dev/null; then
+       case $nonopt in *shtool*) :;; *) false;; esac; then
       # Aesthetically quote it.
       func_quote_for_eval "$nonopt"
       install_prog="$func_quote_for_eval_result "
@@ -1868,6 +2073,10 @@ func_mode_install ()
     func_quote_for_eval "$arg"
     install_prog="$install_prog$func_quote_for_eval_result"
     install_shared_prog=$install_prog
+    case " $install_prog " in
+      *[\\\ /]cp\ *) install_cp=: ;;
+      *) install_cp=false ;;
+    esac
 
     # We need to accept at least all the BSD install flags.
     dest=
@@ -1890,10 +2099,9 @@ func_mode_install ()
       case $arg in
       -d) isdir=yes ;;
       -f)
-	case " $install_prog " in
-	*[\\\ /]cp\ *) ;;
-	*) prev=$arg ;;
-	esac
+	if $install_cp; then :; else
+	  prev=$arg
+	fi
 	;;
       -g | -m | -o)
 	prev=$arg
@@ -1935,8 +2143,10 @@ func_mode_install ()
       func_fatal_help "the \`$prev' option requires an argument"
 
     if test -n "$install_override_mode" && $no_mode; then
-      func_quote_for_eval "$install_override_mode"
-      install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result"
+      if $install_cp; then :; else
+	func_quote_for_eval "$install_override_mode"
+	install_shared_prog="$install_shared_prog -m $func_quote_for_eval_result"
+      fi
     fi
 
     if test -z "$files"; then
@@ -2026,7 +2236,7 @@ func_mode_install ()
 
 	if test -n "$relink_command"; then
 	  # Determine the prefix the user has applied to our future dir.
-	  inst_prefix_dir=`$ECHO "X$destdir" | $Xsed -e "s%$libdir\$%%"`
+	  inst_prefix_dir=`$ECHO "$destdir" | $SED -e "s%$libdir\$%%"`
 
 	  # Don't allow the user to place us outside of our expected
 	  # location b/c this prevents finding dependent libraries that
@@ -2039,9 +2249,9 @@ func_mode_install ()
 
 	  if test -n "$inst_prefix_dir"; then
 	    # Stick the inst_prefix_dir data into the link command.
-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"`
 	  else
-	    relink_command=`$ECHO "X$relink_command" | $Xsed -e "s%@inst_prefix_dir@%%"`
+	    relink_command=`$ECHO "$relink_command" | $SED "s%@inst_prefix_dir@%%"`
 	  fi
 
 	  func_warning "relinking \`$file'"
@@ -2199,7 +2409,7 @@ func_mode_install ()
 	    if test -f "$lib"; then
 	      func_source "$lib"
 	    fi
-	    libfile="$libdir/"`$ECHO "X$lib" | $Xsed -e 's%^.*/%%g'` ### testsuite: skip nested quoting test
+	    libfile="$libdir/"`$ECHO "$lib" | $SED 's%^.*/%%g'` ### testsuite: skip nested quoting test
 	    if test -n "$libdir" && test ! -f "$libfile"; then
 	      func_warning "\`$lib' has not been installed in \`$libdir'"
 	      finalize=no
@@ -2218,7 +2428,7 @@ func_mode_install ()
 		file="$func_basename_result"
 	        outputname="$tmpdir/$file"
 	        # Replace the output file specification.
-	        relink_command=`$ECHO "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'`
+	        relink_command=`$ECHO "$relink_command" | $SED 's%@OUTPUT@%'"$outputname"'%g'`
 
 	        $opt_silent || {
 	          func_quote_for_expand "$relink_command"
@@ -2237,7 +2447,7 @@ func_mode_install ()
 	    }
 	  else
 	    # Install the binary that we compiled earlier.
-	    file=`$ECHO "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"`
+	    file=`$ECHO "$file$stripped_ext" | $SED "s%\([^/]*\)$%$objdir/\1%"`
 	  fi
 	fi
 
@@ -2339,6 +2549,10 @@ func_generate_dlsyms ()
 extern \"C\" {
 #endif
 
+#if defined(__GNUC__) && (((__GNUC__ == 4) && (__GNUC_MINOR__ >= 4)) || (__GNUC__ > 4))
+#pragma GCC diagnostic ignored \"-Wstrict-prototypes\"
+#endif
+
 /* External symbol declarations for the compiler. */\
 "
 
@@ -2348,7 +2562,7 @@ extern \"C\" {
 	  $opt_dry_run || echo ': @PROGRAM@ ' > "$nlist"
 
 	  # Add our own program objects to the symbol list.
-	  progfiles=`$ECHO "X$objs$old_deplibs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	  progfiles=`$ECHO "$objs$old_deplibs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	  for progfile in $progfiles; do
 	    func_verbose "extracting global C symbols from \`$progfile'"
 	    $opt_dry_run || eval "$NM $progfile | $global_symbol_pipe >> '$nlist'"
@@ -2387,7 +2601,7 @@ extern \"C\" {
 	      eval '$GREP -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T'
 	      eval '$MV "$nlist"T "$nlist"'
 	      case $host in
-	        *cygwin | *mingw* | *cegcc* )
+	        *cygwin* | *mingw* | *cegcc* )
 	          eval "echo EXPORTS "'> "$output_objdir/$outputname.def"'
 	          eval 'cat "$nlist" >> "$output_objdir/$outputname.def"'
 	          ;;
@@ -2431,10 +2645,10 @@ extern \"C\" {
 	  if test -f "$nlist"S; then
 	    eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$my_dlsyms"'
 	  else
-	    $ECHO '/* NONE */' >> "$output_objdir/$my_dlsyms"
+	    echo '/* NONE */' >> "$output_objdir/$my_dlsyms"
 	  fi
 
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+	  echo >> "$output_objdir/$my_dlsyms" "\
 
 /* The mapping between symbol names and symbols.  */
 typedef struct {
@@ -2444,7 +2658,7 @@ typedef struct {
 "
 	  case $host in
 	  *cygwin* | *mingw* | *cegcc* )
-	    $ECHO >> "$output_objdir/$my_dlsyms" "\
+	    echo >> "$output_objdir/$my_dlsyms" "\
 /* DATA imports from DLLs on WIN32 con't be const, because
    runtime relocations are performed -- see ld's documentation
    on pseudo-relocs.  */"
@@ -2457,7 +2671,7 @@ typedef struct {
 	    lt_dlsym_const=const ;;
 	  esac
 
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+	  echo >> "$output_objdir/$my_dlsyms" "\
 extern $lt_dlsym_const lt_dlsymlist
 lt_${my_prefix}_LTX_preloaded_symbols[];
 $lt_dlsym_const lt_dlsymlist
@@ -2473,7 +2687,7 @@ lt_${my_prefix}_LTX_preloaded_symbols[] =
 	    eval "$global_symbol_to_c_name_address_lib_prefix" < "$nlist" >> "$output_objdir/$my_dlsyms"
 	    ;;
 	  esac
-	  $ECHO >> "$output_objdir/$my_dlsyms" "\
+	  echo >> "$output_objdir/$my_dlsyms" "\
   {0, (void *) 0}
 };
 
@@ -2531,16 +2745,16 @@ static const void *lt_preloaded_setup() {
 	case $host in
 	*cygwin* | *mingw* | *cegcc* )
 	  if test -f "$output_objdir/$my_outputname.def"; then
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$output_objdir/$my_outputname.def $symfileobj%"`
 	  else
-	    compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	    finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	    compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	    finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
 	  fi
 	  ;;
 	*)
-	  compile_command=`$ECHO "X$compile_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
-	  finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$symfileobj%"`
+	  compile_command=`$ECHO "$compile_command" | $SED "s%@SYMFILE@%$symfileobj%"`
+	  finalize_command=`$ECHO "$finalize_command" | $SED "s%@SYMFILE@%$symfileobj%"`
 	  ;;
 	esac
 	;;
@@ -2554,8 +2768,8 @@ static const void *lt_preloaded_setup() {
       # really was required.
 
       # Nullify the symbol file.
-      compile_command=`$ECHO "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"`
-      finalize_command=`$ECHO "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"`
+      compile_command=`$ECHO "$compile_command" | $SED "s% @SYMFILE@%%"`
+      finalize_command=`$ECHO "$finalize_command" | $SED "s% @SYMFILE@%%"`
     fi
 }
 
@@ -2565,6 +2779,7 @@ static const void *lt_preloaded_setup() {
 # Need a lot of goo to handle *both* DLLs and import libs
 # Has to be a shell function in order to 'eat' the argument
 # that is supplied when $file_magic_command is called.
+# Despite the name, also deal with 64 bit binaries.
 func_win32_libid ()
 {
   $opt_debug
@@ -2575,8 +2790,9 @@ func_win32_libid ()
     win32_libid_type="x86 archive import"
     ;;
   *ar\ archive*) # could be an import, or static
+    # Keep the egrep pattern in sync with the one in _LT_CHECK_MAGIC_METHOD.
     if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null |
-       $EGREP 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then
+       $EGREP 'file format (pei*-i386(.*architecture: i386)?|pe-arm-wince|pe-x86-64)' >/dev/null; then
       win32_nmres=`eval $NM -f posix -A $1 |
 	$SED -n -e '
 	    1,100{
@@ -2614,7 +2830,18 @@ func_extract_an_archive ()
     $opt_debug
     f_ex_an_ar_dir="$1"; shift
     f_ex_an_ar_oldlib="$1"
-    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" 'exit $?'
+    if test "$lock_old_archive_extraction" = yes; then
+      lockfile=$f_ex_an_ar_oldlib.lock
+      until $opt_dry_run || ln "$progpath" "$lockfile" 2>/dev/null; do
+	func_echo "Waiting for $lockfile to be removed"
+	sleep 2
+      done
+    fi
+    func_show_eval "(cd \$f_ex_an_ar_dir && $AR x \"\$f_ex_an_ar_oldlib\")" \
+		   'stat=$?; rm -f "$lockfile"; exit $stat'
+    if test "$lock_old_archive_extraction" = yes; then
+      $opt_dry_run || rm -f "$lockfile"
+    fi
     if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then
      :
     else
@@ -2685,7 +2912,7 @@ func_extract_archives ()
 	    darwin_file=
 	    darwin_files=
 	    for darwin_file in $darwin_filelist; do
-	      darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP`
+	      darwin_files=`find unfat-$$ -name $darwin_file -print | sort | $NL2SP`
 	      $LIPO -create -output "$darwin_file" $darwin_files
 	    done # $darwin_filelist
 	    $RM -rf unfat-$$
@@ -2700,25 +2927,30 @@ func_extract_archives ()
         func_extract_an_archive "$my_xdir" "$my_xabs"
 	;;
       esac
-      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP`
+      my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | sort | $NL2SP`
     done
 
     func_extract_archives_result="$my_oldobjs"
 }
 
 
-
-# func_emit_wrapper_part1 [arg=no]
+# func_emit_wrapper [arg=no]
 #
-# Emit the first part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part1 ()
+# Emit a libtool wrapper script on stdout.
+# Don't directly open a file because we may want to
+# incorporate the script contents within a cygwin/mingw
+# wrapper executable.  Must ONLY be called from within
+# func_mode_link because it depends on a number of variables
+# set therein.
+#
+# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
+# variable will take.  If 'yes', then the emitted script
+# will assume that the directory in which it is stored is
+# the $objdir directory.  This is a cygwin/mingw-specific
+# behavior.
+func_emit_wrapper ()
 {
-	func_emit_wrapper_part1_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_part1_arg1=$1
-	fi
+	func_emit_wrapper_arg1=${1-no}
 
 	$ECHO "\
 #! $SHELL
@@ -2734,7 +2966,6 @@ func_emit_wrapper_part1 ()
 
 # Sed substitution that helps us do robust quoting.  It backslashifies
 # metacharacters that are still active within double-quoted strings.
-Xsed='${SED} -e 1s/^X//'
 sed_quote_subst='$sed_quote_subst'
 
 # Be Bourne compatible
@@ -2765,31 +2996,132 @@ if test \"\$libtool_install_magic\" = \"$magic\"; then
 else
   # When we are sourced in execute mode, \$file and \$ECHO are already set.
   if test \"\$libtool_execute_magic\" != \"$magic\"; then
-    ECHO=\"$qecho\"
-    file=\"\$0\"
-    # Make sure echo works.
-    if test \"X\$1\" = X--no-reexec; then
-      # Discard the --no-reexec flag, and continue.
-      shift
-    elif test \"X\`{ \$ECHO '\t'; } 2>/dev/null\`\" = 'X\t'; then
-      # Yippee, \$ECHO works!
-      :
-    else
-      # Restart under the correct shell, and then maybe \$ECHO will work.
-      exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"}
-    fi
-  fi\
+    file=\"\$0\""
+
+    qECHO=`$ECHO "$ECHO" | $SED "$sed_quote_subst"`
+    $ECHO "\
+
+# A function that is used when there is no print builtin or printf.
+func_fallback_echo ()
+{
+  eval 'cat <<_LTECHO_EOF
+\$1
+_LTECHO_EOF'
+}
+    ECHO=\"$qECHO\"
+  fi
+
+# Very basic option parsing. These options are (a) specific to
+# the libtool wrapper, (b) are identical between the wrapper
+# /script/ and the wrapper /executable/ which is used only on
+# windows platforms, and (c) all begin with the string "--lt-"
+# (application programs are unlikely to have options which match
+# this pattern).
+#
+# There are only two supported options: --lt-debug and
+# --lt-dump-script. There is, deliberately, no --lt-help.
+#
+# The first argument to this parsing function should be the
+# script's $0 value, followed by "$@".
+lt_option_debug=
+func_parse_lt_options ()
+{
+  lt_script_arg0=\$0
+  shift
+  for lt_opt
+  do
+    case \"\$lt_opt\" in
+    --lt-debug) lt_option_debug=1 ;;
+    --lt-dump-script)
+        lt_dump_D=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%/[^/]*$%%'\`
+        test \"X\$lt_dump_D\" = \"X\$lt_script_arg0\" && lt_dump_D=.
+        lt_dump_F=\`\$ECHO \"X\$lt_script_arg0\" | $SED -e 's/^X//' -e 's%^.*/%%'\`
+        cat \"\$lt_dump_D/\$lt_dump_F\"
+        exit 0
+      ;;
+    --lt-*)
+        \$ECHO \"Unrecognized --lt- option: '\$lt_opt'\" 1>&2
+        exit 1
+      ;;
+    esac
+  done
+
+  # Print the debug banner immediately:
+  if test -n \"\$lt_option_debug\"; then
+    echo \"${outputname}:${output}:\${LINENO}: libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\" 1>&2
+  fi
+}
+
+# Used when --lt-debug. Prints its arguments to stdout
+# (redirection is the responsibility of the caller)
+func_lt_dump_args ()
+{
+  lt_dump_args_N=1;
+  for lt_arg
+  do
+    \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[\$lt_dump_args_N]: \$lt_arg\"
+    lt_dump_args_N=\`expr \$lt_dump_args_N + 1\`
+  done
+}
+
+# Core function for launching the target application
+func_exec_program_core ()
+{
 "
-	$ECHO "\
+  case $host in
+  # Backslashes separate directories on plain windows
+  *-*-mingw | *-*-os2* | *-cegcc*)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir\\\\\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
+"
+    ;;
+
+  *)
+    $ECHO "\
+      if test -n \"\$lt_option_debug\"; then
+        \$ECHO \"${outputname}:${output}:\${LINENO}: newargv[0]: \$progdir/\$program\" 1>&2
+        func_lt_dump_args \${1+\"\$@\"} 1>&2
+      fi
+      exec \"\$progdir/\$program\" \${1+\"\$@\"}
+"
+    ;;
+  esac
+  $ECHO "\
+      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
+      exit 1
+}
+
+# A function to encapsulate launching the target application
+# Strips options in the --lt-* namespace from \$@ and
+# launches target application with the remaining arguments.
+func_exec_program ()
+{
+  for lt_wr_arg
+  do
+    case \$lt_wr_arg in
+    --lt-*) ;;
+    *) set x \"\$@\" \"\$lt_wr_arg\"; shift;;
+    esac
+    shift
+  done
+  func_exec_program_core \${1+\"\$@\"}
+}
+
+  # Parse options
+  func_parse_lt_options \"\$0\" \${1+\"\$@\"}
 
   # Find the directory that this script lives in.
-  thisdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\`
+  thisdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*$%%'\`
   test \"x\$thisdir\" = \"x\$file\" && thisdir=.
 
   # Follow symbolic links until we get to the real thisdir.
-  file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\`
+  file=\`ls -ld \"\$file\" | $SED -n 's/.*-> //p'\`
   while test -n \"\$file\"; do
-    destdir=\`\$ECHO \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\`
+    destdir=\`\$ECHO \"\$file\" | $SED 's%/[^/]*\$%%'\`
 
     # If there was a directory component, then change thisdir.
     if test \"x\$destdir\" != \"x\$file\"; then
@@ -2799,30 +3131,13 @@ else
       esac
     fi
 
-    file=\`\$ECHO \"X\$file\" | \$Xsed -e 's%^.*/%%'\`
-    file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\`
+    file=\`\$ECHO \"\$file\" | $SED 's%^.*/%%'\`
+    file=\`ls -ld \"\$thisdir/\$file\" | $SED -n 's/.*-> //p'\`
   done
-"
-}
-# end: func_emit_wrapper_part1
-
-# func_emit_wrapper_part2 [arg=no]
-#
-# Emit the second part of a libtool wrapper script on stdout.
-# For more information, see the description associated with
-# func_emit_wrapper(), below.
-func_emit_wrapper_part2 ()
-{
-	func_emit_wrapper_part2_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_part2_arg1=$1
-	fi
-
-	$ECHO "\
 
   # Usually 'no', except on cygwin/mingw when embedded into
   # the cwrapper.
-  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_part2_arg1
+  WRAPPER_SCRIPT_BELONGS_IN_OBJDIR=$func_emit_wrapper_arg1
   if test \"\$WRAPPER_SCRIPT_BELONGS_IN_OBJDIR\" = \"yes\"; then
     # special case for '.'
     if test \"\$thisdir\" = \".\"; then
@@ -2830,7 +3145,7 @@ func_emit_wrapper_part2 ()
     fi
     # remove .libs from thisdir
     case \"\$thisdir\" in
-    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"X\$thisdir\" | \$Xsed -e 's%[\\\\/][^\\\\/]*$%%'\` ;;
+    *[\\\\/]$objdir ) thisdir=\`\$ECHO \"\$thisdir\" | $SED 's%[\\\\/][^\\\\/]*$%%'\` ;;
     $objdir )   thisdir=. ;;
     esac
   fi
@@ -2893,7 +3208,7 @@ func_emit_wrapper_part2 ()
 
     # Some systems cannot cope with colon-terminated $shlibpath_var
     # The second colon is a workaround for a bug in BeOS R4 sed
-    $shlibpath_var=\`\$ECHO \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\`
+    $shlibpath_var=\`\$ECHO \"\$$shlibpath_var\" | $SED 's/::*\$//'\`
 
     export $shlibpath_var
 "
@@ -2910,64 +3225,18 @@ func_emit_wrapper_part2 ()
 	$ECHO "\
     if test \"\$libtool_execute_magic\" != \"$magic\"; then
       # Run the actual program with our arguments.
-"
-	case $host in
-	# Backslashes separate directories on plain windows
-	*-*-mingw | *-*-os2* | *-cegcc*)
-	  $ECHO "\
-      exec \"\$progdir\\\\\$program\" \${1+\"\$@\"}
-"
-	  ;;
-
-	*)
-	  $ECHO "\
-      exec \"\$progdir/\$program\" \${1+\"\$@\"}
-"
-	  ;;
-	esac
-	$ECHO "\
-      \$ECHO \"\$0: cannot exec \$program \$*\" 1>&2
-      exit 1
+      func_exec_program \${1+\"\$@\"}
     fi
   else
     # The program doesn't exist.
     \$ECHO \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2
     \$ECHO \"This script is just a wrapper for \$program.\" 1>&2
-    $ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
+    \$ECHO \"See the $PACKAGE documentation for more information.\" 1>&2
     exit 1
   fi
 fi\
 "
 }
-# end: func_emit_wrapper_part2
-
-
-# func_emit_wrapper [arg=no]
-#
-# Emit a libtool wrapper script on stdout.
-# Don't directly open a file because we may want to
-# incorporate the script contents within a cygwin/mingw
-# wrapper executable.  Must ONLY be called from within
-# func_mode_link because it depends on a number of variables
-# set therein.
-#
-# ARG is the value that the WRAPPER_SCRIPT_BELONGS_IN_OBJDIR
-# variable will take.  If 'yes', then the emitted script
-# will assume that the directory in which it is stored is
-# the $objdir directory.  This is a cygwin/mingw-specific
-# behavior.
-func_emit_wrapper ()
-{
-	func_emit_wrapper_arg1=no
-	if test -n "$1" ; then
-	  func_emit_wrapper_arg1=$1
-	fi
-
-	# split this up so that func_emit_cwrapperexe_src
-	# can call each part independently.
-	func_emit_wrapper_part1 "${func_emit_wrapper_arg1}"
-	func_emit_wrapper_part2 "${func_emit_wrapper_arg1}"
-}
 
 
 # func_to_host_path arg
@@ -2994,23 +3263,19 @@ func_emit_wrapper ()
 func_to_host_path ()
 {
   func_to_host_path_result="$1"
-  if test -n "$1" ; then
+  if test -n "$1"; then
     case $host in
       *mingw* )
         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
         case $build in
           *mingw* ) # actually, msys
             # awkward: cmd appends spaces to result
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_path_tmp1=`( cmd //c echo "$1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
+            func_to_host_path_result=`( cmd //c echo "$1" ) 2>/dev/null |
+              $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
             ;;
           *cygwin* )
-            func_to_host_path_tmp1=`cygpath -w "$1"`
-            func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
-              $SED -e "$lt_sed_naive_backslashify"`
+            func_to_host_path_result=`cygpath -w "$1" |
+	      $SED -e "$lt_sed_naive_backslashify"`
             ;;
           * )
             # Unfortunately, winepath does not exit with a non-zero
@@ -3022,17 +3287,17 @@ func_to_host_path ()
             # the odd construction:
             func_to_host_path_tmp1=`winepath -w "$1" 2>/dev/null`
             if test "$?" -eq 0 && test -n "${func_to_host_path_tmp1}"; then
-              func_to_host_path_result=`echo "$func_to_host_path_tmp1" |\
+              func_to_host_path_result=`$ECHO "$func_to_host_path_tmp1" |
                 $SED -e "$lt_sed_naive_backslashify"`
             else
               # Allow warning below.
-              func_to_host_path_result=""
+              func_to_host_path_result=
             fi
             ;;
         esac
         if test -z "$func_to_host_path_result" ; then
           func_error "Could not determine host path corresponding to"
-          func_error "  '$1'"
+          func_error "  \`$1'"
           func_error "Continuing, but uninstalled executables may not work."
           # Fallback:
           func_to_host_path_result="$1"
@@ -3065,30 +3330,24 @@ func_to_host_path ()
 func_to_host_pathlist ()
 {
   func_to_host_pathlist_result="$1"
-  if test -n "$1" ; then
+  if test -n "$1"; then
     case $host in
       *mingw* )
         lt_sed_naive_backslashify='s|\\\\*|\\|g;s|/|\\|g;s|\\|\\\\|g'
         # Remove leading and trailing path separator characters from
         # ARG. msys behavior is inconsistent here, cygpath turns them
         # into '.;' and ';.', and winepath ignores them completely.
-        func_to_host_pathlist_tmp2="$1"
-        # Once set for this call, this variable should not be
-        # reassigned. It is used in tha fallback case.
-        func_to_host_pathlist_tmp1=`echo "$func_to_host_pathlist_tmp2" |\
-          $SED -e 's|^:*||' -e 's|:*$||'`
+	func_stripname : : "$1"
+        func_to_host_pathlist_tmp1=$func_stripname_result
         case $build in
           *mingw* ) # Actually, msys.
             # Awkward: cmd appends spaces to result.
-            lt_sed_strip_trailing_spaces="s/[ ]*\$//"
-            func_to_host_pathlist_tmp2=`( cmd //c echo "$func_to_host_pathlist_tmp1" |\
-              $SED -e "$lt_sed_strip_trailing_spaces" ) 2>/dev/null || echo ""`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
-              $SED -e "$lt_sed_naive_backslashify"`
+            func_to_host_pathlist_result=`
+	      ( cmd //c echo "$func_to_host_pathlist_tmp1" ) 2>/dev/null |
+	      $SED -e 's/[ ]*$//' -e "$lt_sed_naive_backslashify"`
             ;;
           *cygwin* )
-            func_to_host_pathlist_tmp2=`cygpath -w -p "$func_to_host_pathlist_tmp1"`
-            func_to_host_pathlist_result=`echo "$func_to_host_pathlist_tmp2" |\
+            func_to_host_pathlist_result=`cygpath -w -p "$func_to_host_pathlist_tmp1" |
               $SED -e "$lt_sed_naive_backslashify"`
             ;;
           * )
@@ -3104,18 +3363,17 @@ func_to_host_pathlist ()
                   if test -z "$func_to_host_pathlist_result" ; then
                     func_to_host_pathlist_result="$func_to_host_path_result"
                   else
-                    func_to_host_pathlist_result="$func_to_host_pathlist_result;$func_to_host_path_result"
+                    func_append func_to_host_pathlist_result ";$func_to_host_path_result"
                   fi
                 fi
               fi
-              IFS=:
             done
             IFS=$func_to_host_pathlist_oldIFS
             ;;
         esac
-        if test -z "$func_to_host_pathlist_result" ; then
+        if test -z "$func_to_host_pathlist_result"; then
           func_error "Could not determine the host path(s) corresponding to"
-          func_error "  '$1'"
+          func_error "  \`$1'"
           func_error "Continuing, but uninstalled executables may not work."
           # Fallback. This may break if $1 contains DOS-style drive
           # specifications. The fix is not to complicate the expression
@@ -3132,7 +3390,7 @@ func_to_host_pathlist ()
             ;;
         esac
         case "$1" in
-          *: ) func_to_host_pathlist_result="$func_to_host_pathlist_result;"
+          *: ) func_append func_to_host_pathlist_result ";"
             ;;
         esac
         ;;
@@ -3157,31 +3415,23 @@ func_emit_cwrapperexe_src ()
 
    This wrapper executable should never be moved out of the build directory.
    If it is, it will not operate correctly.
-
-   Currently, it simply execs the wrapper *script* "$SHELL $output",
-   but could eventually absorb all of the scripts functionality and
-   exec $objdir/$outputname directly.
 */
 EOF
 	    cat <<"EOF"
+#ifdef _MSC_VER
+# define _CRT_SECURE_NO_DEPRECATE 1
+#endif
 #include <stdio.h>
 #include <stdlib.h>
 #ifdef _MSC_VER
 # include <direct.h>
 # include <process.h>
 # include <io.h>
-# define setmode _setmode
 #else
 # include <unistd.h>
 # include <stdint.h>
 # ifdef __CYGWIN__
 #  include <io.h>
-#  define HAVE_SETENV
-#  ifdef __STRICT_ANSI__
-char *realpath (const char *, char *);
-int putenv (char *);
-int setenv (const char *, const char *, int);
-#  endif
 # endif
 #endif
 #include <malloc.h>
@@ -3193,6 +3443,44 @@ int setenv (const char *, const char *, int);
 #include <fcntl.h>
 #include <sys/stat.h>
 
+/* declarations of non-ANSI functions */
+#if defined(__MINGW32__)
+# ifdef __STRICT_ANSI__
+int _putenv (const char *);
+# endif
+#elif defined(__CYGWIN__)
+# ifdef __STRICT_ANSI__
+char *realpath (const char *, char *);
+int putenv (char *);
+int setenv (const char *, const char *, int);
+# endif
+/* #elif defined (other platforms) ... */
+#endif
+
+/* portability defines, excluding path handling macros */
+#if defined(_MSC_VER)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+# define S_IXUSR _S_IEXEC
+# ifndef _INTPTR_T_DEFINED
+#  define _INTPTR_T_DEFINED
+#  define intptr_t int
+# endif
+#elif defined(__MINGW32__)
+# define setmode _setmode
+# define stat    _stat
+# define chmod   _chmod
+# define getcwd  _getcwd
+# define putenv  _putenv
+#elif defined(__CYGWIN__)
+# define HAVE_SETENV
+# define FOPEN_WB "wb"
+/* #elif defined (other platforms) ... */
+#endif
+
 #if defined(PATH_MAX)
 # define LT_PATHMAX PATH_MAX
 #elif defined(MAXPATHLEN)
@@ -3208,14 +3496,7 @@ int setenv (const char *, const char *, int);
 # define S_IXGRP 0
 #endif
 
-#ifdef _MSC_VER
-# define S_IXUSR _S_IEXEC
-# define stat _stat
-# ifndef _INTPTR_T_DEFINED
-#  define intptr_t int
-# endif
-#endif
-
+/* path handling portability macros */
 #ifndef DIR_SEPARATOR
 # define DIR_SEPARATOR '/'
 # define PATH_SEPARATOR ':'
@@ -3246,10 +3527,6 @@ int setenv (const char *, const char *, int);
 # define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2)
 #endif /* PATH_SEPARATOR_2 */
 
-#ifdef __CYGWIN__
-# define FOPEN_WB "wb"
-#endif
-
 #ifndef FOPEN_WB
 # define FOPEN_WB "w"
 #endif
@@ -3262,22 +3539,13 @@ int setenv (const char *, const char *, int);
   if (stale) { free ((void *) stale); stale = 0; } \
 } while (0)
 
-#undef LTWRAPPER_DEBUGPRINTF
-#if defined DEBUGWRAPPER
-# define LTWRAPPER_DEBUGPRINTF(args) ltwrapper_debugprintf args
-static void
-ltwrapper_debugprintf (const char *fmt, ...)
-{
-    va_list args;
-    va_start (args, fmt);
-    (void) vfprintf (stderr, fmt, args);
-    va_end (args);
-}
+#if defined(LT_DEBUGWRAPPER)
+static int lt_debug = 1;
 #else
-# define LTWRAPPER_DEBUGPRINTF(args)
+static int lt_debug = 0;
 #endif
 
-const char *program_name = NULL;
+const char *program_name = "libtool-wrapper"; /* in case xstrdup fails */
 
 void *xmalloc (size_t num);
 char *xstrdup (const char *string);
@@ -3287,33 +3555,18 @@ char *chase_symlinks (const char *pathspec);
 int make_executable (const char *path);
 int check_executable (const char *path);
 char *strendzap (char *str, const char *pat);
-void lt_fatal (const char *message, ...);
+void lt_debugprintf (const char *file, int line, const char *fmt, ...);
+void lt_fatal (const char *file, int line, const char *message, ...);
+static const char *nonnull (const char *s);
+static const char *nonempty (const char *s);
 void lt_setenv (const char *name, const char *value);
 char *lt_extend_str (const char *orig_value, const char *add, int to_end);
-void lt_opt_process_env_set (const char *arg);
-void lt_opt_process_env_prepend (const char *arg);
-void lt_opt_process_env_append (const char *arg);
-int lt_split_name_value (const char *arg, char** name, char** value);
 void lt_update_exe_path (const char *name, const char *value);
 void lt_update_lib_path (const char *name, const char *value);
 char **prepare_spawn (char **argv);
-
-static const char *script_text_part1 =
+void lt_dump_script (FILE *f);
 EOF
 
-	    func_emit_wrapper_part1 yes |
-	        $SED -e 's/\([\\"]\)/\\\1/g' \
-	             -e 's/^/  "/' -e 's/$/\\n"/'
-	    echo ";"
-	    cat <<EOF
-
-static const char *script_text_part2 =
-EOF
-	    func_emit_wrapper_part2 yes |
-	        $SED -e 's/\([\\"]\)/\\\1/g' \
-	             -e 's/^/  "/' -e 's/$/\\n"/'
-	    echo ";"
-
 	    cat <<EOF
 const char * MAGIC_EXE = "$magic_exe";
 const char * LIB_PATH_VARNAME = "$shlibpath_var";
@@ -3357,24 +3610,10 @@ EOF
 	    cat <<"EOF"
 
 #define LTWRAPPER_OPTION_PREFIX         "--lt-"
-#define LTWRAPPER_OPTION_PREFIX_LENGTH  5
 
-static const size_t opt_prefix_len         = LTWRAPPER_OPTION_PREFIX_LENGTH;
 static const char *ltwrapper_option_prefix = LTWRAPPER_OPTION_PREFIX;
-
 static const char *dumpscript_opt       = LTWRAPPER_OPTION_PREFIX "dump-script";
-
-static const size_t env_set_opt_len     = LTWRAPPER_OPTION_PREFIX_LENGTH + 7;
-static const char *env_set_opt          = LTWRAPPER_OPTION_PREFIX "env-set";
-  /* argument is putenv-style "foo=bar", value of foo is set to bar */
-
-static const size_t env_prepend_opt_len = LTWRAPPER_OPTION_PREFIX_LENGTH + 11;
-static const char *env_prepend_opt      = LTWRAPPER_OPTION_PREFIX "env-prepend";
-  /* argument is putenv-style "foo=bar", new value of foo is bar${foo} */
-
-static const size_t env_append_opt_len  = LTWRAPPER_OPTION_PREFIX_LENGTH + 10;
-static const char *env_append_opt       = LTWRAPPER_OPTION_PREFIX "env-append";
-  /* argument is putenv-style "foo=bar", new value of foo is ${foo}bar */
+static const char *debug_opt            = LTWRAPPER_OPTION_PREFIX "debug";
 
 int
 main (int argc, char *argv[])
@@ -3391,10 +3630,13 @@ main (int argc, char *argv[])
   int i;
 
   program_name = (char *) xstrdup (base_name (argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) argv[0]      : %s\n", argv[0]));
-  LTWRAPPER_DEBUGPRINTF (("(main) program_name : %s\n", program_name));
+  newargz = XMALLOC (char *, argc + 1);
 
-  /* very simple arg parsing; don't want to rely on getopt */
+  /* very simple arg parsing; don't want to rely on getopt
+   * also, copy all non cwrapper options to newargz, except
+   * argz[0], which is handled differently
+   */
+  newargc=0;
   for (i = 1; i < argc; i++)
     {
       if (strcmp (argv[i], dumpscript_opt) == 0)
@@ -3408,25 +3650,57 @@ EOF
 	      esac
 
 	    cat <<"EOF"
-	  printf ("%s", script_text_part1);
-	  printf ("%s", script_text_part2);
+	  lt_dump_script (stdout);
 	  return 0;
 	}
+      if (strcmp (argv[i], debug_opt) == 0)
+	{
+          lt_debug = 1;
+          continue;
+	}
+      if (strcmp (argv[i], ltwrapper_option_prefix) == 0)
+        {
+          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
+             namespace, but it is not one of the ones we know about and
+             have already dealt with, above (inluding dump-script), then
+             report an error. Otherwise, targets might begin to believe
+             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
+             namespace. The first time any user complains about this, we'll
+             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
+             or a configure.ac-settable value.
+           */
+          lt_fatal (__FILE__, __LINE__,
+		    "unrecognized %s option: '%s'",
+                    ltwrapper_option_prefix, argv[i]);
+        }
+      /* otherwise ... */
+      newargz[++newargc] = xstrdup (argv[i]);
     }
+  newargz[++newargc] = NULL;
+
+EOF
+	    cat <<EOF
+  /* The GNU banner must be the first non-error debug message */
+  lt_debugprintf (__FILE__, __LINE__, "libtool wrapper (GNU $PACKAGE$TIMESTAMP) $VERSION\n");
+EOF
+	    cat <<"EOF"
+  lt_debugprintf (__FILE__, __LINE__, "(main) argv[0]: %s\n", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__, "(main) program_name: %s\n", program_name);
 
-  newargz = XMALLOC (char *, argc + 1);
   tmp_pathspec = find_executable (argv[0]);
   if (tmp_pathspec == NULL)
-    lt_fatal ("Couldn't find %s", argv[0]);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (before symlink chase) at : %s\n",
-			  tmp_pathspec));
+    lt_fatal (__FILE__, __LINE__, "couldn't find %s", argv[0]);
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (before symlink chase) at: %s\n",
+		  tmp_pathspec);
 
   actual_cwrapper_path = chase_symlinks (tmp_pathspec);
-  LTWRAPPER_DEBUGPRINTF (("(main) found exe (after symlink chase) at : %s\n",
-			  actual_cwrapper_path));
+  lt_debugprintf (__FILE__, __LINE__,
+                  "(main) found exe (after symlink chase) at: %s\n",
+		  actual_cwrapper_path);
   XFREE (tmp_pathspec);
 
-  actual_cwrapper_name = xstrdup( base_name (actual_cwrapper_path));
+  actual_cwrapper_name = xstrdup (base_name (actual_cwrapper_path));
   strendzap (actual_cwrapper_path, actual_cwrapper_name);
 
   /* wrapper name transforms */
@@ -3444,8 +3718,9 @@ EOF
   target_name = tmp_pathspec;
   tmp_pathspec = 0;
 
-  LTWRAPPER_DEBUGPRINTF (("(main) libtool target name: %s\n",
-			  target_name));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(main) libtool target name: %s\n",
+		  target_name);
 EOF
 
 	    cat <<EOF
@@ -3498,77 +3773,12 @@ EOF
   lt_update_lib_path (LIB_PATH_VARNAME, LIB_PATH_VALUE);
   lt_update_exe_path (EXE_PATH_VARNAME, EXE_PATH_VALUE);
 
-  newargc=0;
-  for (i = 1; i < argc; i++)
-    {
-      if (strncmp (argv[i], env_set_opt, env_set_opt_len) == 0)
-        {
-          if (argv[i][env_set_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_set_opt_len + 1;
-              lt_opt_process_env_set (p);
-            }
-          else if (argv[i][env_set_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_set (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_set_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_prepend_opt, env_prepend_opt_len) == 0)
-        {
-          if (argv[i][env_prepend_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_prepend_opt_len + 1;
-              lt_opt_process_env_prepend (p);
-            }
-          else if (argv[i][env_prepend_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_prepend (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_prepend_opt);
-          continue;
-        }
-      if (strncmp (argv[i], env_append_opt, env_append_opt_len) == 0)
-        {
-          if (argv[i][env_append_opt_len] == '=')
-            {
-              const char *p = argv[i] + env_append_opt_len + 1;
-              lt_opt_process_env_append (p);
-            }
-          else if (argv[i][env_append_opt_len] == '\0' && i + 1 < argc)
-            {
-              lt_opt_process_env_append (argv[++i]); /* don't copy */
-            }
-          else
-            lt_fatal ("%s missing required argument", env_append_opt);
-          continue;
-        }
-      if (strncmp (argv[i], ltwrapper_option_prefix, opt_prefix_len) == 0)
-        {
-          /* however, if there is an option in the LTWRAPPER_OPTION_PREFIX
-             namespace, but it is not one of the ones we know about and
-             have already dealt with, above (inluding dump-script), then
-             report an error. Otherwise, targets might begin to believe
-             they are allowed to use options in the LTWRAPPER_OPTION_PREFIX
-             namespace. The first time any user complains about this, we'll
-             need to make LTWRAPPER_OPTION_PREFIX a configure-time option
-             or a configure.ac-settable value.
-           */
-          lt_fatal ("Unrecognized option in %s namespace: '%s'",
-                    ltwrapper_option_prefix, argv[i]);
-        }
-      /* otherwise ... */
-      newargz[++newargc] = xstrdup (argv[i]);
-    }
-  newargz[++newargc] = NULL;
-
-  LTWRAPPER_DEBUGPRINTF     (("(main) lt_argv_zero : %s\n", (lt_argv_zero ? lt_argv_zero : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__, "(main) lt_argv_zero: %s\n",
+		  nonnull (lt_argv_zero));
   for (i = 0; i < newargc; i++)
     {
-      LTWRAPPER_DEBUGPRINTF (("(main) newargz[%d]   : %s\n", i, (newargz[i] ? newargz[i] : "<NULL>")));
+      lt_debugprintf (__FILE__, __LINE__, "(main) newargz[%d]: %s\n",
+		      i, nonnull (newargz[i]));
     }
 
 EOF
@@ -3582,7 +3792,9 @@ EOF
   if (rval == -1)
     {
       /* failed to start process */
-      LTWRAPPER_DEBUGPRINTF (("(main) failed to launch target \"%s\": errno = %d\n", lt_argv_zero, errno));
+      lt_debugprintf (__FILE__, __LINE__,
+		      "(main) failed to launch target \"%s\": %s\n",
+		      lt_argv_zero, nonnull (strerror (errno)));
       return 127;
     }
   return rval;
@@ -3604,7 +3816,7 @@ xmalloc (size_t num)
 {
   void *p = (void *) malloc (num);
   if (!p)
-    lt_fatal ("Memory exhausted");
+    lt_fatal (__FILE__, __LINE__, "memory exhausted");
 
   return p;
 }
@@ -3638,8 +3850,8 @@ check_executable (const char *path)
 {
   struct stat st;
 
-  LTWRAPPER_DEBUGPRINTF (("(check_executable)  : %s\n",
-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(check_executable): %s\n",
+                  nonempty (path));
   if ((!path) || (!*path))
     return 0;
 
@@ -3656,8 +3868,8 @@ make_executable (const char *path)
   int rval = 0;
   struct stat st;
 
-  LTWRAPPER_DEBUGPRINTF (("(make_executable)   : %s\n",
-			  path ? (*path ? path : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(make_executable): %s\n",
+                  nonempty (path));
   if ((!path) || (!*path))
     return 0;
 
@@ -3683,8 +3895,8 @@ find_executable (const char *wrapper)
   int tmp_len;
   char *concat_name;
 
-  LTWRAPPER_DEBUGPRINTF (("(find_executable)   : %s\n",
-			  wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"));
+  lt_debugprintf (__FILE__, __LINE__, "(find_executable): %s\n",
+                  nonempty (wrapper));
 
   if ((wrapper == NULL) || (*wrapper == '\0'))
     return NULL;
@@ -3737,7 +3949,8 @@ find_executable (const char *wrapper)
 		{
 		  /* empty path: current directory */
 		  if (getcwd (tmp, LT_PATHMAX) == NULL)
-		    lt_fatal ("getcwd failed");
+		    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+                              nonnull (strerror (errno)));
 		  tmp_len = strlen (tmp);
 		  concat_name =
 		    XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
@@ -3762,7 +3975,8 @@ find_executable (const char *wrapper)
     }
   /* Relative path | not found in path: prepend cwd */
   if (getcwd (tmp, LT_PATHMAX) == NULL)
-    lt_fatal ("getcwd failed");
+    lt_fatal (__FILE__, __LINE__, "getcwd failed: %s",
+              nonnull (strerror (errno)));
   tmp_len = strlen (tmp);
   concat_name = XMALLOC (char, tmp_len + 1 + strlen (wrapper) + 1);
   memcpy (concat_name, tmp, tmp_len);
@@ -3788,8 +4002,9 @@ chase_symlinks (const char *pathspec)
   int has_symlinks = 0;
   while (strlen (tmp_pathspec) && !has_symlinks)
     {
-      LTWRAPPER_DEBUGPRINTF (("checking path component for symlinks: %s\n",
-			      tmp_pathspec));
+      lt_debugprintf (__FILE__, __LINE__,
+		      "checking path component for symlinks: %s\n",
+		      tmp_pathspec);
       if (lstat (tmp_pathspec, &s) == 0)
 	{
 	  if (S_ISLNK (s.st_mode) != 0)
@@ -3811,8 +4026,9 @@ chase_symlinks (const char *pathspec)
 	}
       else
 	{
-	  char *errstr = strerror (errno);
-	  lt_fatal ("Error accessing file %s (%s)", tmp_pathspec, errstr);
+	  lt_fatal (__FILE__, __LINE__,
+		    "error accessing file \"%s\": %s",
+		    tmp_pathspec, nonnull (strerror (errno)));
 	}
     }
   XFREE (tmp_pathspec);
@@ -3825,7 +4041,8 @@ chase_symlinks (const char *pathspec)
   tmp_pathspec = realpath (pathspec, buf);
   if (tmp_pathspec == 0)
     {
-      lt_fatal ("Could not follow symlinks for %s", pathspec);
+      lt_fatal (__FILE__, __LINE__,
+		"could not follow symlinks for %s", pathspec);
     }
   return xstrdup (tmp_pathspec);
 #endif
@@ -3851,11 +4068,25 @@ strendzap (char *str, const char *pat)
   return str;
 }
 
+void
+lt_debugprintf (const char *file, int line, const char *fmt, ...)
+{
+  va_list args;
+  if (lt_debug)
+    {
+      (void) fprintf (stderr, "%s:%s:%d: ", program_name, file, line);
+      va_start (args, fmt);
+      (void) vfprintf (stderr, fmt, args);
+      va_end (args);
+    }
+}
+
 static void
-lt_error_core (int exit_status, const char *mode,
+lt_error_core (int exit_status, const char *file,
+	       int line, const char *mode,
 	       const char *message, va_list ap)
 {
-  fprintf (stderr, "%s: %s: ", program_name, mode);
+  fprintf (stderr, "%s:%s:%d: %s: ", program_name, file, line, mode);
   vfprintf (stderr, message, ap);
   fprintf (stderr, ".\n");
 
@@ -3864,20 +4095,32 @@ lt_error_core (int exit_status, const char *mode,
 }
 
 void
-lt_fatal (const char *message, ...)
+lt_fatal (const char *file, int line, const char *message, ...)
 {
   va_list ap;
   va_start (ap, message);
-  lt_error_core (EXIT_FAILURE, "FATAL", message, ap);
+  lt_error_core (EXIT_FAILURE, file, line, "FATAL", message, ap);
   va_end (ap);
 }
 
+static const char *
+nonnull (const char *s)
+{
+  return s ? s : "(null)";
+}
+
+static const char *
+nonempty (const char *s)
+{
+  return (s && !*s) ? "(empty)" : nonnull (s);
+}
+
 void
 lt_setenv (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_setenv) setting '%s' to '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_setenv) setting '%s' to '%s'\n",
+                  nonnull (name), nonnull (value));
   {
 #ifdef HAVE_SETENV
     /* always make a copy, for consistency with !HAVE_SETENV */
@@ -3922,95 +4165,12 @@ lt_extend_str (const char *orig_value, const char *add, int to_end)
   return new_value;
 }
 
-int
-lt_split_name_value (const char *arg, char** name, char** value)
-{
-  const char *p;
-  int len;
-  if (!arg || !*arg)
-    return 1;
-
-  p = strchr (arg, (int)'=');
-
-  if (!p)
-    return 1;
-
-  *value = xstrdup (++p);
-
-  len = strlen (arg) - strlen (*value);
-  *name = XMALLOC (char, len);
-  strncpy (*name, arg, len-1);
-  (*name)[len - 1] = '\0';
-
-  return 0;
-}
-
-void
-lt_opt_process_env_set (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_set_opt, arg);
-    }
-
-  lt_setenv (name, value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_prepend (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_prepend_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 0);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
-void
-lt_opt_process_env_append (const char *arg)
-{
-  char *name = NULL;
-  char *value = NULL;
-  char *new_value = NULL;
-
-  if (lt_split_name_value (arg, &name, &value) != 0)
-    {
-      XFREE (name);
-      XFREE (value);
-      lt_fatal ("bad argument for %s: '%s'", env_append_opt, arg);
-    }
-
-  new_value = lt_extend_str (getenv (name), value, 1);
-  lt_setenv (name, new_value);
-  XFREE (new_value);
-  XFREE (name);
-  XFREE (value);
-}
-
 void
 lt_update_exe_path (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_exe_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
 
   if (name && *name && value && *value)
     {
@@ -4029,9 +4189,9 @@ lt_update_exe_path (const char *name, const char *value)
 void
 lt_update_lib_path (const char *name, const char *value)
 {
-  LTWRAPPER_DEBUGPRINTF (("(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
-                          (name ? name : "<NULL>"),
-                          (value ? value : "<NULL>")));
+  lt_debugprintf (__FILE__, __LINE__,
+		  "(lt_update_lib_path) modifying '%s' by prepending '%s'\n",
+                  nonnull (name), nonnull (value));
 
   if (name && *name && value && *value)
     {
@@ -4161,9 +4321,32 @@ prepare_spawn (char **argv)
 EOF
 		;;
 	    esac
+
+            cat <<"EOF"
+void lt_dump_script (FILE* f)
+{
+EOF
+	    func_emit_wrapper yes |
+              $SED -e 's/\([\\"]\)/\\\1/g' \
+	           -e 's/^/  fputs ("/' -e 's/$/\\n", f);/'
+
+            cat <<"EOF"
+}
+EOF
 }
 # end: func_emit_cwrapperexe_src
 
+# func_win32_import_lib_p ARG
+# True if ARG is an import lib, as indicated by $file_magic_cmd
+func_win32_import_lib_p ()
+{
+    $opt_debug
+    case `eval $file_magic_cmd \"\$1\" 2>/dev/null | $SED -e 10q` in
+    *import*) : ;;
+    *) false ;;
+    esac
+}
+
 # func_mode_link arg...
 func_mode_link ()
 {
@@ -4208,6 +4391,7 @@ func_mode_link ()
     new_inherited_linker_flags=
 
     avoid_version=no
+    bindir=
     dlfiles=
     dlprefiles=
     dlself=no
@@ -4300,6 +4484,11 @@ func_mode_link ()
 	esac
 
 	case $prev in
+	bindir)
+	  bindir="$arg"
+	  prev=
+	  continue
+	  ;;
 	dlfiles|dlprefiles)
 	  if test "$preload" = no; then
 	    # Add the symbol object into the linking commands.
@@ -4561,6 +4750,11 @@ func_mode_link ()
 	continue
 	;;
 
+      -bindir)
+	prev=bindir
+	continue
+	;;
+
       -dlopen)
 	prev=dlfiles
 	continue
@@ -4639,7 +4833,7 @@ func_mode_link ()
 	esac
 	case $host in
 	*-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-cegcc*)
-	  testbindir=`$ECHO "X$dir" | $Xsed -e 's*/lib$*/bin*'`
+	  testbindir=`$ECHO "$dir" | $SED 's*/lib$*/bin*'`
 	  case :$dllsearchpath: in
 	  *":$dir:"*) ;;
 	  ::) dllsearchpath=$dir;;
@@ -4658,7 +4852,7 @@ func_mode_link ()
       -l*)
 	if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # These systems don't actually have a C or math library (as such)
 	    continue
 	    ;;
@@ -4844,7 +5038,7 @@ func_mode_link ()
 	for flag in $args; do
 	  IFS="$save_ifs"
           func_quote_for_eval "$flag"
-	  arg="$arg $wl$func_quote_for_eval_result"
+	  arg="$arg $func_quote_for_eval_result"
 	  compiler_flags="$compiler_flags $func_quote_for_eval_result"
 	done
 	IFS="$save_ifs"
@@ -4890,18 +5084,19 @@ func_mode_link ()
 	arg="$func_quote_for_eval_result"
 	;;
 
-      # -64, -mips[0-9] enable 64-bit mode on the SGI compiler
-      # -r[0-9][0-9]* specifies the processor on the SGI compiler
-      # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler
-      # +DA*, +DD* enable 64-bit mode on the HP compiler
-      # -q* pass through compiler args for the IBM compiler
-      # -m*, -t[45]*, -txscale* pass through architecture-specific
-      # compiler args for GCC
-      # -F/path gives path to uninstalled frameworks, gcc on darwin
-      # -p, -pg, --coverage, -fprofile-* pass through profiling flag for GCC
-      # @file GCC response files
+      # Flags to be passed through unchanged, with rationale:
+      # -64, -mips[0-9]      enable 64-bit mode for the SGI compiler
+      # -r[0-9][0-9]*        specify processor for the SGI compiler
+      # -xarch=*, -xtarget=* enable 64-bit mode for the Sun compiler
+      # +DA*, +DD*           enable 64-bit mode for the HP compiler
+      # -q*                  compiler args for the IBM compiler
+      # -m*, -t[45]*, -txscale* architecture-specific flags for GCC
+      # -F/path              path to uninstalled frameworks, gcc on darwin
+      # -p, -pg, --coverage, -fprofile-*  profiling flags for GCC
+      # @file                GCC response files
+      # -tp=*                Portland pgcc target processor selection
       -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*| \
-      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*)
+      -t[45]*|-txscale*|-p|-pg|--coverage|-fprofile-*|-F*|@*|-tp=*)
         func_quote_for_eval "$arg"
 	arg="$func_quote_for_eval_result"
         func_append compile_command " $arg"
@@ -5061,7 +5256,7 @@ func_mode_link ()
 
     if test -n "$shlibpath_var"; then
       # get the directories listed in $shlibpath_var
-      eval shlib_search_path=\`\$ECHO \"X\${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\`
+      eval shlib_search_path=\`\$ECHO \"\${$shlibpath_var}\" \| \$SED \'s/:/ /g\'\`
     else
       shlib_search_path=
     fi
@@ -5184,7 +5379,8 @@ func_mode_link ()
 	  # Collect preopened libtool deplibs, except any this library
 	  # has declared as weak libs
 	  for deplib in $dependency_libs; do
-            deplib_base=`$ECHO "X$deplib" | $Xsed -e "$basename"`
+	    func_basename "$deplib"
+            deplib_base=$func_basename_result
 	    case " $weak_libs " in
 	    *" $deplib_base "*) ;;
 	    *) deplibs="$deplibs $deplib" ;;
@@ -5363,7 +5559,7 @@ func_mode_link ()
 		match_pattern*)
 		  set dummy $deplibs_check_method; shift
 		  match_pattern_regex=`expr "$deplibs_check_method" : "$1 \(.*\)"`
-		  if eval "\$ECHO \"X$deplib\"" 2>/dev/null | $Xsed -e 10q \
+		  if eval "\$ECHO \"$deplib\"" 2>/dev/null | $SED 10q \
 		    | $EGREP "$match_pattern_regex" > /dev/null; then
 		    valid_a_lib=yes
 		  fi
@@ -5373,15 +5569,15 @@ func_mode_link ()
 		;;
 	      esac
 	      if test "$valid_a_lib" != yes; then
-		$ECHO
+		echo
 		$ECHO "*** Warning: Trying to link with static lib archive $deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because the file extensions .$libext of this argument makes me believe"
-		$ECHO "*** that it is just a static archive that I should not use here."
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because the file extensions .$libext of this argument makes me believe"
+		echo "*** that it is just a static archive that I should not use here."
 	      else
-		$ECHO
+		echo
 		$ECHO "*** Warning: Linking the shared library $output against the"
 		$ECHO "*** static library $deplib is not portable!"
 		deplibs="$deplib $deplibs"
@@ -5454,7 +5650,7 @@ func_mode_link ()
 
 	# Convert "-framework foo" to "foo.ltframework"
 	if test -n "$inherited_linker_flags"; then
-	  tmp_inherited_linker_flags=`$ECHO "X$inherited_linker_flags" | $Xsed -e 's/-framework \([^ $]*\)/\1.ltframework/g'`
+	  tmp_inherited_linker_flags=`$ECHO "$inherited_linker_flags" | $SED 's/-framework \([^ $]*\)/\1.ltframework/g'`
 	  for tmp_inherited_linker_flag in $tmp_inherited_linker_flags; do
 	    case " $new_inherited_linker_flags " in
 	      *" $tmp_inherited_linker_flag "*) ;;
@@ -5462,7 +5658,7 @@ func_mode_link ()
 	    esac
 	  done
 	fi
-	dependency_libs=`$ECHO "X $dependency_libs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	dependency_libs=`$ECHO " $dependency_libs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	if test "$linkmode,$pass" = "lib,link" ||
 	   test "$linkmode,$pass" = "prog,scan" ||
 	   { test "$linkmode" != prog && test "$linkmode" != lib; }; then
@@ -5716,7 +5912,7 @@ func_mode_link ()
 	    fi
 	  done
 	  if test -z "$dlopenmodule" && test "$shouldnotlink" = yes && test "$pass" = link; then
-	    $ECHO
+	    echo
 	    if test "$linkmode" = prog; then
 	      $ECHO "*** Warning: Linking the executable $output against the loadable module"
 	    else
@@ -5819,9 +6015,9 @@ func_mode_link ()
 		      if test "X$dlopenmodule" != "X$lib"; then
 			$ECHO "*** Warning: lib $linklib is a module, not a shared library"
 			if test -z "$old_library" ; then
-			  $ECHO
-			  $ECHO "*** And there doesn't seem to be a static archive available"
-			  $ECHO "*** The link will probably fail, sorry"
+			  echo
+			  echo "*** And there doesn't seem to be a static archive available"
+			  echo "*** The link will probably fail, sorry"
 			else
 			  add="$dir/$old_library"
 			fi
@@ -5961,21 +6157,21 @@ func_mode_link ()
 
 	    # Just print a warning and add the library to dependency_libs so
 	    # that the program can be linked against the static library.
-	    $ECHO
+	    echo
 	    $ECHO "*** Warning: This system can not link to static lib archive $lib."
-	    $ECHO "*** I have the capability to make that library automatically link in when"
-	    $ECHO "*** you link to this library.  But I can only do this if you have a"
-	    $ECHO "*** shared version of the library, which you do not appear to have."
+	    echo "*** I have the capability to make that library automatically link in when"
+	    echo "*** you link to this library.  But I can only do this if you have a"
+	    echo "*** shared version of the library, which you do not appear to have."
 	    if test "$module" = yes; then
-	      $ECHO "*** But as you try to build a module library, libtool will still create "
-	      $ECHO "*** a static module, that should work as long as the dlopening application"
-	      $ECHO "*** is linked with the -dlopen flag to resolve symbols at runtime."
+	      echo "*** But as you try to build a module library, libtool will still create "
+	      echo "*** a static module, that should work as long as the dlopening application"
+	      echo "*** is linked with the -dlopen flag to resolve symbols at runtime."
 	      if test -z "$global_symbol_pipe"; then
-		$ECHO
-		$ECHO "*** However, this would only work if libtool was able to extract symbol"
-		$ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-		$ECHO "*** not find such a program.  So, this module is probably useless."
-		$ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+		echo
+		echo "*** However, this would only work if libtool was able to extract symbol"
+		echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+		echo "*** not find such a program.  So, this module is probably useless."
+		echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	      fi
 	      if test "$build_old_libs" = no; then
 		build_libtool_libs=module
@@ -6029,6 +6225,7 @@ func_mode_link ()
 	  if test "$link_all_deplibs" != no; then
 	    # Add the search paths of all dependency libraries
 	    for deplib in $dependency_libs; do
+	      path=
 	      case $deplib in
 	      -L*) path="$deplib" ;;
 	      *.la)
@@ -6094,7 +6291,7 @@ func_mode_link ()
 	  compile_deplibs="$new_inherited_linker_flags $compile_deplibs"
 	  finalize_deplibs="$new_inherited_linker_flags $finalize_deplibs"
 	else
-	  compiler_flags="$compiler_flags "`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  compiler_flags="$compiler_flags "`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	fi
       fi
       dependency_libs="$newdependency_libs"
@@ -6262,7 +6459,7 @@ func_mode_link ()
 	if test "$deplibs_check_method" != pass_all; then
 	  func_fatal_error "cannot build libtool library \`$output' from non-libtool objects on this host:$objs"
 	else
-	  $ECHO
+	  echo
 	  $ECHO "*** Warning: Linking the shared library $output against the non-libtool"
 	  $ECHO "*** objects $objs is not portable!"
 	  libobjs="$libobjs $objs"
@@ -6330,7 +6527,7 @@ func_mode_link ()
 	    age="$number_minor"
 	    revision="$number_revision"
 	    ;;
-	  freebsd-aout|freebsd-elf|sunos)
+	  freebsd-aout|freebsd-elf|qnx|sunos)
 	    current="$number_major"
 	    revision="$number_minor"
 	    age="0"
@@ -6564,14 +6761,14 @@ func_mode_link ()
 	oldlibs="$oldlibs $output_objdir/$libname.$libext"
 
 	# Transform .lo files to .o files.
-	oldobjs="$objs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP`
+	oldobjs="$objs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; $lo2o" | $NL2SP`
       fi
 
       # Eliminate all temporary directories.
       #for path in $notinst_path; do
-      #	lib_search_path=`$ECHO "X$lib_search_path " | $Xsed -e "s% $path % %g"`
-      #	deplibs=`$ECHO "X$deplibs " | $Xsed -e "s% -L$path % %g"`
-      #	dependency_libs=`$ECHO "X$dependency_libs " | $Xsed -e "s% -L$path % %g"`
+      #	lib_search_path=`$ECHO "$lib_search_path " | $SED "s% $path % %g"`
+      #	deplibs=`$ECHO "$deplibs " | $SED "s% -L$path % %g"`
+      #	dependency_libs=`$ECHO "$dependency_libs " | $SED "s% -L$path % %g"`
       #done
 
       if test -n "$xrpath"; then
@@ -6612,7 +6809,7 @@ func_mode_link ()
       if test "$build_libtool_libs" = yes; then
 	if test -n "$rpath"; then
 	  case $host in
-	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc*)
+	  *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2* | *-*-beos* | *-cegcc* | *-*-haiku*)
 	    # these systems don't actually have a c library (as such)!
 	    ;;
 	  *-*-rhapsody* | *-*-darwin1.[012])
@@ -6697,13 +6894,13 @@ EOF
 		    newdeplibs="$newdeplibs $i"
 		  else
 		    droppeddeps=yes
-		    $ECHO
+		    echo
 		    $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		    $ECHO "*** I have the capability to make that library automatically link in when"
-		    $ECHO "*** you link to this library.  But I can only do this if you have a"
-		    $ECHO "*** shared version of the library, which I believe you do not have"
-		    $ECHO "*** because a test_compile did reveal that the linker did not use it for"
-		    $ECHO "*** its dynamic dependency list that programs get resolved with at runtime."
+		    echo "*** I have the capability to make that library automatically link in when"
+		    echo "*** you link to this library.  But I can only do this if you have a"
+		    echo "*** shared version of the library, which I believe you do not have"
+		    echo "*** because a test_compile did reveal that the linker did not use it for"
+		    echo "*** its dynamic dependency list that programs get resolved with at runtime."
 		  fi
 		fi
 		;;
@@ -6740,22 +6937,22 @@ EOF
 		      newdeplibs="$newdeplibs $i"
 		    else
 		      droppeddeps=yes
-		      $ECHO
+		      echo
 		      $ECHO "*** Warning: dynamic linker does not accept needed library $i."
-		      $ECHO "*** I have the capability to make that library automatically link in when"
-		      $ECHO "*** you link to this library.  But I can only do this if you have a"
-		      $ECHO "*** shared version of the library, which you do not appear to have"
-		      $ECHO "*** because a test_compile did reveal that the linker did not use this one"
-		      $ECHO "*** as a dynamic dependency that programs can get resolved with at runtime."
+		      echo "*** I have the capability to make that library automatically link in when"
+		      echo "*** you link to this library.  But I can only do this if you have a"
+		      echo "*** shared version of the library, which you do not appear to have"
+		      echo "*** because a test_compile did reveal that the linker did not use this one"
+		      echo "*** as a dynamic dependency that programs can get resolved with at runtime."
 		    fi
 		  fi
 		else
 		  droppeddeps=yes
-		  $ECHO
+		  echo
 		  $ECHO "*** Warning!  Library $i is needed by this library but I was not able to"
-		  $ECHO "*** make it link in!  You will probably need to install it or some"
-		  $ECHO "*** library that it depends on before this library will be fully"
-		  $ECHO "*** functional.  Installing it before continuing would be even better."
+		  echo "*** make it link in!  You will probably need to install it or some"
+		  echo "*** library that it depends on before this library will be fully"
+		  echo "*** functional.  Installing it before continuing would be even better."
 		fi
 		;;
 	      *)
@@ -6801,7 +6998,7 @@ EOF
 			potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'`
 			case $potliblink in
 			[\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";;
-			*) potlib=`$ECHO "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";;
+			*) potlib=`$ECHO "$potlib" | $SED 's,[^/]*$,,'`"$potliblink";;
 			esac
 		      done
 		      if eval $file_magic_cmd \"\$potlib\" 2>/dev/null |
@@ -6816,12 +7013,12 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$ECHO
+		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because I did check the linker path looking for a file starting"
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for file magic test)"
 		else
@@ -6859,7 +7056,7 @@ EOF
 		  potential_libs=`ls $i/$libname[.-]* 2>/dev/null`
 		  for potent_lib in $potential_libs; do
 		    potlib="$potent_lib" # see symlink-check above in file_magic test
-		    if eval "\$ECHO \"X$potent_lib\"" 2>/dev/null | $Xsed -e 10q | \
+		    if eval "\$ECHO \"$potent_lib\"" 2>/dev/null | $SED 10q | \
 		       $EGREP "$match_pattern_regex" > /dev/null; then
 		      newdeplibs="$newdeplibs $a_deplib"
 		      a_deplib=""
@@ -6870,12 +7067,12 @@ EOF
 	      fi
 	      if test -n "$a_deplib" ; then
 		droppeddeps=yes
-		$ECHO
+		echo
 		$ECHO "*** Warning: linker path does not have real file for library $a_deplib."
-		$ECHO "*** I have the capability to make that library automatically link in when"
-		$ECHO "*** you link to this library.  But I can only do this if you have a"
-		$ECHO "*** shared version of the library, which you do not appear to have"
-		$ECHO "*** because I did check the linker path looking for a file starting"
+		echo "*** I have the capability to make that library automatically link in when"
+		echo "*** you link to this library.  But I can only do this if you have a"
+		echo "*** shared version of the library, which you do not appear to have"
+		echo "*** because I did check the linker path looking for a file starting"
 		if test -z "$potlib" ; then
 		  $ECHO "*** with $libname but no candidates were found. (...for regex pattern test)"
 		else
@@ -6893,25 +7090,25 @@ EOF
 	  ;;
 	none | unknown | *)
 	  newdeplibs=""
-	  tmp_deplibs=`$ECHO "X $deplibs" | $Xsed \
-	      -e 's/ -lc$//' -e 's/ -[LR][^ ]*//g'`
+	  tmp_deplibs=`$ECHO " $deplibs" | $SED 's/ -lc$//; s/ -[LR][^ ]*//g'`
 	  if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then
 	    for i in $predeps $postdeps ; do
 	      # can't use Xsed below, because $i might contain '/'
-	      tmp_deplibs=`$ECHO "X $tmp_deplibs" | $Xsed -e "s,$i,,"`
+	      tmp_deplibs=`$ECHO " $tmp_deplibs" | $SED "s,$i,,"`
 	    done
 	  fi
-	  if $ECHO "X $tmp_deplibs" | $Xsed -e 's/[	 ]//g' |
-	     $GREP . >/dev/null; then
-	    $ECHO
+	  case $tmp_deplibs in
+	  *[!\	\ ]*)
+	    echo
 	    if test "X$deplibs_check_method" = "Xnone"; then
-	      $ECHO "*** Warning: inter-library dependencies are not supported in this platform."
+	      echo "*** Warning: inter-library dependencies are not supported in this platform."
 	    else
-	      $ECHO "*** Warning: inter-library dependencies are not known to be supported."
+	      echo "*** Warning: inter-library dependencies are not known to be supported."
 	    fi
-	    $ECHO "*** All declared inter-library dependencies are being dropped."
+	    echo "*** All declared inter-library dependencies are being dropped."
 	    droppeddeps=yes
-	  fi
+	    ;;
+	  esac
 	  ;;
 	esac
 	versuffix=$versuffix_save
@@ -6923,23 +7120,23 @@ EOF
 	case $host in
 	*-*-rhapsody* | *-*-darwin1.[012])
 	  # On Rhapsody replace the C library with the System framework
-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's/ -lc / System.ltframework /'`
 	  ;;
 	esac
 
 	if test "$droppeddeps" = yes; then
 	  if test "$module" = yes; then
-	    $ECHO
-	    $ECHO "*** Warning: libtool could not satisfy all declared inter-library"
+	    echo
+	    echo "*** Warning: libtool could not satisfy all declared inter-library"
 	    $ECHO "*** dependencies of module $libname.  Therefore, libtool will create"
-	    $ECHO "*** a static module, that should work as long as the dlopening"
-	    $ECHO "*** application is linked with the -dlopen flag."
+	    echo "*** a static module, that should work as long as the dlopening"
+	    echo "*** application is linked with the -dlopen flag."
 	    if test -z "$global_symbol_pipe"; then
-	      $ECHO
-	      $ECHO "*** However, this would only work if libtool was able to extract symbol"
-	      $ECHO "*** lists from a program, using \`nm' or equivalent, but libtool could"
-	      $ECHO "*** not find such a program.  So, this module is probably useless."
-	      $ECHO "*** \`nm' from GNU binutils and a full rebuild may help."
+	      echo
+	      echo "*** However, this would only work if libtool was able to extract symbol"
+	      echo "*** lists from a program, using \`nm' or equivalent, but libtool could"
+	      echo "*** not find such a program.  So, this module is probably useless."
+	      echo "*** \`nm' from GNU binutils and a full rebuild may help."
 	    fi
 	    if test "$build_old_libs" = no; then
 	      oldlibs="$output_objdir/$libname.$libext"
@@ -6949,16 +7146,16 @@ EOF
 	      build_libtool_libs=no
 	    fi
 	  else
-	    $ECHO "*** The inter-library dependencies that have been dropped here will be"
-	    $ECHO "*** automatically added whenever a program is linked with this library"
-	    $ECHO "*** or is declared to -dlopen it."
+	    echo "*** The inter-library dependencies that have been dropped here will be"
+	    echo "*** automatically added whenever a program is linked with this library"
+	    echo "*** or is declared to -dlopen it."
 
 	    if test "$allow_undefined" = no; then
-	      $ECHO
-	      $ECHO "*** Since this library must not contain undefined symbols,"
-	      $ECHO "*** because either the platform does not support them or"
-	      $ECHO "*** it was explicitly requested with -no-undefined,"
-	      $ECHO "*** libtool will only create a static version of it."
+	      echo
+	      echo "*** Since this library must not contain undefined symbols,"
+	      echo "*** because either the platform does not support them or"
+	      echo "*** it was explicitly requested with -no-undefined,"
+	      echo "*** libtool will only create a static version of it."
 	      if test "$build_old_libs" = no; then
 		oldlibs="$output_objdir/$libname.$libext"
 		build_libtool_libs=module
@@ -6975,9 +7172,9 @@ EOF
       # Time to change all our "foo.ltframework" stuff back to "-framework foo"
       case $host in
 	*-*-darwin*)
-	  newdeplibs=`$ECHO "X $newdeplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  new_inherited_linker_flags=`$ECHO "X $new_inherited_linker_flags" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	  deplibs=`$ECHO "X $deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  newdeplibs=`$ECHO " $newdeplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  new_inherited_linker_flags=`$ECHO " $new_inherited_linker_flags" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	  deplibs=`$ECHO " $deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	  ;;
       esac
 
@@ -7099,7 +7296,7 @@ EOF
 	done
 
 	# Use standard objects if they are pic
-	test -z "$pic_flag" && libobjs=`$ECHO "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	test -z "$pic_flag" && libobjs=`$ECHO "$libobjs" | $SP2NL | $SED "$lo2o" | $NL2SP`
 	test "X$libobjs" = "X " && libobjs=
 
 	delfiles=
@@ -7165,7 +7362,7 @@ EOF
 	if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	  tmp_export_symbols="$export_symbols"
 	  test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	  $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	  $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	fi
 
 	if test "X$skipped_export" != "X:" && test -n "$orig_export_symbols"; then
@@ -7266,7 +7463,8 @@ EOF
 	    save_libobjs=$libobjs
 	  fi
 	  save_output=$output
-	  output_la=`$ECHO "X$output" | $Xsed -e "$basename"`
+	  func_basename "$output"
+	  output_la=$func_basename_result
 
 	  # Clear the reloadable object creation command queue and
 	  # initialize k to one.
@@ -7279,12 +7477,12 @@ EOF
 	  if test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "$with_gnu_ld" = yes; then
 	    output=${output_objdir}/${output_la}.lnkscript
 	    func_verbose "creating GNU ld script: $output"
-	    $ECHO 'INPUT (' > $output
+	    echo 'INPUT (' > $output
 	    for obj in $save_libobjs
 	    do
 	      $ECHO "$obj" >> $output
 	    done
-	    $ECHO ')' >> $output
+	    echo ')' >> $output
 	    delfiles="$delfiles $output"
 	  elif test -n "$save_libobjs" && test "X$skipped_export" != "X:" && test "X$file_list_spec" != X; then
 	    output=${output_objdir}/${output_la}.lnk
@@ -7326,17 +7524,19 @@ EOF
 		  # command to the queue.
 		  if test "$k" -eq 1 ; then
 		    # The first file doesn't have a previous command to add.
-		    eval concat_cmds=\"$reload_cmds $objlist $last_robj\"
+		    reload_objs=$objlist
+		    eval concat_cmds=\"$reload_cmds\"
 		  else
 		    # All subsequent reloadable object files will link in
 		    # the last one created.
-		    eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj~\$RM $last_robj\"
+		    reload_objs="$objlist $last_robj"
+		    eval concat_cmds=\"\$concat_cmds~$reload_cmds~\$RM $last_robj\"
 		  fi
 		  last_robj=$output_objdir/$output_la-${k}.$objext
 		  func_arith $k + 1
 		  k=$func_arith_result
 		  output=$output_objdir/$output_la-${k}.$objext
-		  objlist=$obj
+		  objlist=" $obj"
 		  func_len " $last_robj"
 		  func_arith $len0 + $func_len_result
 		  len=$func_arith_result
@@ -7346,7 +7546,8 @@ EOF
 	      # reloadable object file.  All subsequent reloadable object
 	      # files will link in the last one created.
 	      test -z "$concat_cmds" || concat_cmds=$concat_cmds~
-	      eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\"
+	      reload_objs="$objlist $last_robj"
+	      eval concat_cmds=\"\${concat_cmds}$reload_cmds\"
 	      if test -n "$last_robj"; then
 	        eval concat_cmds=\"\${concat_cmds}~\$RM $last_robj\"
 	      fi
@@ -7405,7 +7606,7 @@ EOF
 	    if test -n "$export_symbols" && test -n "$include_expsyms"; then
 	      tmp_export_symbols="$export_symbols"
 	      test -n "$orig_export_symbols" && tmp_export_symbols="$orig_export_symbols"
-	      $opt_dry_run || eval '$ECHO "X$include_expsyms" | $Xsed | $SP2NL >> "$tmp_export_symbols"'
+	      $opt_dry_run || eval '$ECHO "$include_expsyms" | $SP2NL >> "$tmp_export_symbols"'
 	    fi
 
 	    if test -n "$orig_export_symbols"; then
@@ -7570,7 +7771,7 @@ EOF
       if test -n "$convenience"; then
 	if test -n "$whole_archive_flag_spec"; then
 	  eval tmp_whole_archive_flags=\"$whole_archive_flag_spec\"
-	  reload_conv_objs=$reload_objs\ `$ECHO "X$tmp_whole_archive_flags" | $Xsed -e 's|,| |g'`
+	  reload_conv_objs=$reload_objs\ `$ECHO "$tmp_whole_archive_flags" | $SED 's|,| |g'`
 	else
 	  gentop="$output_objdir/${obj}x"
 	  generated="$generated $gentop"
@@ -7581,7 +7782,7 @@ EOF
       fi
 
       # Create the old-style object.
-      reload_objs="$objs$old_deplibs "`$ECHO "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
+      reload_objs="$objs$old_deplibs "`$ECHO "$libobjs" | $SP2NL | $SED "/\.${libext}$/d; /\.lib$/d; $lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test
 
       output="$obj"
       func_execute_cmds "$reload_cmds" 'exit $?'
@@ -7641,8 +7842,8 @@ EOF
       case $host in
       *-*-rhapsody* | *-*-darwin1.[012])
 	# On Rhapsody replace the C library is the System framework
-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's/ -lc / System.ltframework /'`
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's/ -lc / System.ltframework /'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's/ -lc / System.ltframework /'`
 	;;
       esac
 
@@ -7659,8 +7860,8 @@ EOF
 	  esac
 	fi
 	# Time to change all our "foo.ltframework" stuff back to "-framework foo"
-	compile_deplibs=`$ECHO "X $compile_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
-	finalize_deplibs=`$ECHO "X $finalize_deplibs" | $Xsed -e 's% \([^ $]*\).ltframework% -framework \1%g'`
+	compile_deplibs=`$ECHO " $compile_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
+	finalize_deplibs=`$ECHO " $finalize_deplibs" | $SED 's% \([^ $]*\).ltframework% -framework \1%g'`
 	;;
       esac
 
@@ -7797,8 +7998,8 @@ EOF
 
       if test -n "$libobjs" && test "$build_old_libs" = yes; then
 	# Transform all the library objects into standard objects.
-	compile_command=`$ECHO "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
-	finalize_command=`$ECHO "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP`
+	compile_command=`$ECHO "$compile_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
+	finalize_command=`$ECHO "$finalize_command" | $SP2NL | $SED "$lo2o" | $NL2SP`
       fi
 
       func_generate_dlsyms "$outputname" "@PROGRAM@" "no"
@@ -7810,15 +8011,15 @@ EOF
 
       wrappers_required=yes
       case $host in
+      *cegcc* | *mingw32ce*)
+        # Disable wrappers for cegcc and mingw32ce hosts, we are cross compiling anyway.
+        wrappers_required=no
+        ;;
       *cygwin* | *mingw* )
         if test "$build_libtool_libs" != yes; then
           wrappers_required=no
         fi
         ;;
-      *cegcc)
-        # Disable wrappers for cegcc, we are cross compiling anyway.
-        wrappers_required=no
-        ;;
       *)
         if test "$need_relink" = no || test "$build_libtool_libs" != yes; then
           wrappers_required=no
@@ -7827,7 +8028,7 @@ EOF
       esac
       if test "$wrappers_required" = no; then
 	# Replace the output file specification.
-	compile_command=`$ECHO "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	compile_command=`$ECHO "$compile_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	link_command="$compile_command$compile_rpath"
 
 	# We have no uninstalled library dependencies, so finalize right now.
@@ -7874,7 +8075,7 @@ EOF
 	# We don't need to create a wrapper script.
 	link_command="$compile_var$compile_command$compile_rpath"
 	# Replace the output file specification.
-	link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'`
+	link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output"'%g'`
 	# Delete the old output file.
 	$opt_dry_run || $RM $output
 	# Link the executable and exit
@@ -7893,7 +8094,7 @@ EOF
 	if test "$fast_install" != no; then
 	  link_command="$finalize_var$compile_command$finalize_rpath"
 	  if test "$fast_install" = yes; then
-	    relink_command=`$ECHO "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'`
+	    relink_command=`$ECHO "$compile_var$compile_command$compile_rpath" | $SED 's%@OUTPUT@%\$progdir/\$file%g'`
 	  else
 	    # fast_install is set to needless
 	    relink_command=
@@ -7905,7 +8106,7 @@ EOF
       fi
 
       # Replace the output file specification.
-      link_command=`$ECHO "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
+      link_command=`$ECHO "$link_command" | $SED 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'`
 
       # Delete the old output files.
       $opt_dry_run || $RM $output $output_objdir/$outputname $output_objdir/lt-$outputname
@@ -7929,18 +8130,7 @@ EOF
 	  fi
 	done
 	relink_command="(cd `pwd`; $relink_command)"
-	relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
-      fi
-
-      # Quote $ECHO for shipping.
-      if test "X$ECHO" = "X$SHELL $progpath --fallback-echo"; then
-	case $progpath in
-	[\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";;
-	*) qecho="$SHELL `pwd`/$progpath --fallback-echo";;
-	esac
-	qecho=`$ECHO "X$qecho" | $Xsed -e "$sed_quote_subst"`
-      else
-	qecho=`$ECHO "X$ECHO" | $Xsed -e "$sed_quote_subst"`
+	relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
       fi
 
       # Only actually do things if not in dry run mode.
@@ -8061,7 +8251,7 @@ EOF
 	    done | sort | sort -uc >/dev/null 2>&1); then
 	  :
 	else
-	  $ECHO "copying selected object files to avoid basename conflicts..."
+	  echo "copying selected object files to avoid basename conflicts..."
 	  gentop="$output_objdir/${outputname}x"
 	  generated="$generated $gentop"
 	  func_mkdir_p "$gentop"
@@ -8172,7 +8362,7 @@ EOF
       done
       # Quote the link command for shipping.
       relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)"
-      relink_command=`$ECHO "X$relink_command" | $Xsed -e "$sed_quote_subst"`
+      relink_command=`$ECHO "$relink_command" | $SED "$sed_quote_subst"`
       if test "$hardcode_automatic" = yes ; then
 	relink_command=
       fi
@@ -8257,9 +8447,27 @@ EOF
 	  fi
 	  $RM $output
 	  # place dlname in correct position for cygwin
+	  # In fact, it would be nice if we could use this code for all target
+	  # systems that can't hard-code library paths into their executables
+	  # and that have no shared library path variable independent of PATH,
+	  # but it turns out we can't easily determine that from inspecting
+	  # libtool variables, so we have to hard-code the OSs to which it
+	  # applies here; at the moment, that means platforms that use the PE
+	  # object format with DLL files.  See the long comment at the top of
+	  # tests/bindir.at for full details.
 	  tdlname=$dlname
 	  case $host,$output,$installed,$module,$dlname in
-	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;;
+	    *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll | *cegcc*,*lai,yes,no,*.dll)
+	      # If a -bindir argument was supplied, place the dll there.
+	      if test "x$bindir" != x ;
+	      then
+		func_relative_path "$install_libdir" "$bindir"
+		tdlname=$func_relative_path_result$dlname
+	      else
+		# Otherwise fall back on heuristic.
+		tdlname=../bin/$dlname
+	      fi
+	      ;;
 	  esac
 	  $ECHO > $output "\
 # $outputname - a libtool library file