diff options
Diffstat (limited to 'configure')
-rwxr-xr-x | configure | 1129 |
1 files changed, 482 insertions, 647 deletions
@@ -1,6 +1,6 @@ #! /bin/sh -# From configure.in Revision: 1.2 +# From configure.in Revision: 1.9 @@ -77,23 +77,27 @@ # AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library, adds --enable-ltdl-convenience to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. +# the libltdl convenience library and INCLTDL to the include flags for +# the libltdl header and adds --enable-ltdl-convenience to the +# configure arguments. Note that LIBLTDL and INCLTDL are not +# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not +# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed +# with '${top_builddir}/' and INCLTDL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. # AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library, and adds --enable-ltdl-install to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. +# the libltdl installable library and INCLTDL to the include flags for +# the libltdl header and adds --enable-ltdl-install to the configure +# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is +# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed +# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed +# with '${top_srcdir}/' (note the single quotes!). If your package is +# not flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. # In the future, this macro may have to be called after AC_PROG_LIBTOOL. @@ -117,12 +121,41 @@ +#serial 2 + + + + # From Ulrich Drepper. # serial 1 +#serial 5 + + + + +# Define uintmax_t to `unsigned long' or `unsigned long long' +# if <inttypes.h> does not exist. + + + +#serial 3 + + +# Define HAVE_INTTYPES_H if <inttypes.h> exists, +# doesn't clash with <sys/types.h>, and declares uintmax_t. + + + + + + +#serial 2 + +# Check for setlocale declaration. @@ -134,7 +167,7 @@ # but which still want to provide support for the GNU gettext functionality. # Please note that the actual code is *not* freely available. -# serial 7 +# serial 8 @@ -170,7 +203,7 @@ # but which still want to provide support for the GNU gettext functionality. # Please note that the actual code is *not* freely available. -# serial 1 +# serial 2 @@ -204,8 +237,6 @@ ac_help="$ac_help --disable-nls do not use Native Language Support" ac_help="$ac_help --with-included-gettext use the GNU gettext library included here" -ac_help="$ac_help - --with-catgets use catgets functions if available" # Initialize some variables set by options. # The variables have the same names as the options, with @@ -747,7 +778,7 @@ ac_configure=$ac_aux_dir/configure # This should be Cygnus configure. # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:751: checking for a BSD compatible install" >&5 +echo "configure:782: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -800,7 +831,7 @@ test -z "$INSTALL_SCRIPT" && INSTALL_SCRIPT='${INSTALL_PROGRAM}' test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' echo $ac_n "checking whether build environment is sane""... $ac_c" 1>&6 -echo "configure:804: checking whether build environment is sane" >&5 +echo "configure:835: checking whether build environment is sane" >&5 # Just in case sleep 1 echo timestamp > conftestfile @@ -857,7 +888,7 @@ test "$program_suffix" != NONE && test "$program_transform_name" = "" && program_transform_name="s,x,x," echo $ac_n "checking whether ${MAKE-make} sets \${MAKE}""... $ac_c" 1>&6 -echo "configure:861: checking whether ${MAKE-make} sets \${MAKE}" >&5 +echo "configure:892: checking whether ${MAKE-make} sets \${MAKE}" >&5 set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_prog_make_${ac_make}_set'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -903,7 +934,7 @@ EOF missing_dir=`cd $ac_aux_dir && pwd` echo $ac_n "checking for working aclocal""... $ac_c" 1>&6 -echo "configure:907: checking for working aclocal" >&5 +echo "configure:938: checking for working aclocal" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -916,7 +947,7 @@ else fi echo $ac_n "checking for working autoconf""... $ac_c" 1>&6 -echo "configure:920: checking for working autoconf" >&5 +echo "configure:951: checking for working autoconf" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -929,7 +960,7 @@ else fi echo $ac_n "checking for working automake""... $ac_c" 1>&6 -echo "configure:933: checking for working automake" >&5 +echo "configure:964: checking for working automake" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -942,7 +973,7 @@ else fi echo $ac_n "checking for working autoheader""... $ac_c" 1>&6 -echo "configure:946: checking for working autoheader" >&5 +echo "configure:977: checking for working autoheader" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -955,7 +986,7 @@ else fi echo $ac_n "checking for working makeinfo""... $ac_c" 1>&6 -echo "configure:959: checking for working makeinfo" >&5 +echo "configure:990: checking for working makeinfo" >&5 # Run test in a subshell; some versions of sh will print an error if # an executable is not found, even if stderr is redirected. # Redirect stdin to placate older versions of autoconf. Sigh. @@ -972,12 +1003,12 @@ fi -ALL_LINGUAS="da de el es fr ko nl no no@nynorsk pl pt sl sv" +ALL_LINGUAS="da de el es fr ko nl no no@nynorsk pl pt sl sv tr" # Extract the first word of "gcc", so it can be a program name with args. set dummy gcc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:981: checking for $ac_word" >&5 +echo "configure:1012: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1007,7 +1038,7 @@ if test -z "$CC"; then # Extract the first word of "cc", so it can be a program name with args. set dummy cc; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1011: checking for $ac_word" >&5 +echo "configure:1042: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1058,7 +1089,7 @@ fi # Extract the first word of "cl", so it can be a program name with args. set dummy cl; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1062: checking for $ac_word" >&5 +echo "configure:1093: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_CC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1090,7 +1121,7 @@ fi fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works""... $ac_c" 1>&6 -echo "configure:1094: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 +echo "configure:1125: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) works" >&5 ac_ext=c # CFLAGS is not in ac_cpp because -g, -O, etc. are not valid cpp options. @@ -1101,12 +1132,12 @@ cross_compiling=$ac_cv_prog_cc_cross cat > conftest.$ac_ext << EOF -#line 1105 "configure" +#line 1136 "configure" #include "confdefs.h" main(){return(0);} EOF -if { (eval echo configure:1110: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1141: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then ac_cv_prog_cc_works=yes # If we can't run a trivial program, we are probably using a cross compiler. if (./conftest; exit) 2>/dev/null; then @@ -1132,12 +1163,12 @@ if test $ac_cv_prog_cc_works = no; then { echo "configure: error: installation or configuration problem: C compiler cannot create executables." 1>&2; exit 1; } fi echo $ac_n "checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler""... $ac_c" 1>&6 -echo "configure:1136: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 +echo "configure:1167: checking whether the C compiler ($CC $CFLAGS $LDFLAGS) is a cross-compiler" >&5 echo "$ac_t""$ac_cv_prog_cc_cross" 1>&6 cross_compiling=$ac_cv_prog_cc_cross echo $ac_n "checking whether we are using GNU C""... $ac_c" 1>&6 -echo "configure:1141: checking whether we are using GNU C" >&5 +echo "configure:1172: checking whether we are using GNU C" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gcc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1146,7 +1177,7 @@ else yes; #endif EOF -if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1150: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then +if { ac_try='${CC-cc} -E conftest.c'; { (eval echo configure:1181: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; }; } | egrep yes >/dev/null 2>&1; then ac_cv_prog_gcc=yes else ac_cv_prog_gcc=no @@ -1165,7 +1196,7 @@ ac_test_CFLAGS="${CFLAGS+set}" ac_save_CFLAGS="$CFLAGS" CFLAGS= echo $ac_n "checking whether ${CC-cc} accepts -g""... $ac_c" 1>&6 -echo "configure:1169: checking whether ${CC-cc} accepts -g" >&5 +echo "configure:1200: checking whether ${CC-cc} accepts -g" >&5 if eval "test \"`echo '$''{'ac_cv_prog_cc_g'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1272,7 +1303,7 @@ else { echo "configure: error: can not run $ac_config_sub" 1>&2; exit 1; } fi echo $ac_n "checking host system type""... $ac_c" 1>&6 -echo "configure:1276: checking host system type" >&5 +echo "configure:1307: checking host system type" >&5 host_alias=$host case "$host_alias" in @@ -1293,7 +1324,7 @@ host_os=`echo $host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` echo "$ac_t""$host" 1>&6 echo $ac_n "checking build system type""... $ac_c" 1>&6 -echo "configure:1297: checking build system type" >&5 +echo "configure:1328: checking build system type" >&5 build_alias=$build case "$build_alias" in @@ -1313,7 +1344,7 @@ echo "$ac_t""$build" 1>&6 # Extract the first word of "ranlib", so it can be a program name with args. set dummy ranlib; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1317: checking for $ac_word" >&5 +echo "configure:1348: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_RANLIB'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1352,7 +1383,7 @@ ac_prog=ld if test "$ac_cv_prog_gcc" = yes; then # Check if gcc -print-prog-name=ld gives a path. echo $ac_n "checking for ld used by GCC""... $ac_c" 1>&6 -echo "configure:1356: checking for ld used by GCC" >&5 +echo "configure:1387: checking for ld used by GCC" >&5 ac_prog=`($CC -print-prog-name=ld) 2>&5` case "$ac_prog" in # Accept absolute paths. @@ -1376,10 +1407,10 @@ echo "configure:1356: checking for ld used by GCC" >&5 esac elif test "$with_gnu_ld" = yes; then echo $ac_n "checking for GNU ld""... $ac_c" 1>&6 -echo "configure:1380: checking for GNU ld" >&5 +echo "configure:1411: checking for GNU ld" >&5 else echo $ac_n "checking for non-GNU ld""... $ac_c" 1>&6 -echo "configure:1383: checking for non-GNU ld" >&5 +echo "configure:1414: checking for non-GNU ld" >&5 fi if eval "test \"`echo '$''{'ac_cv_path_LD'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1414,7 +1445,7 @@ else fi test -z "$LD" && { echo "configure: error: no acceptable ld found in \$PATH" 1>&2; exit 1; } echo $ac_n "checking if the linker ($LD) is GNU ld""... $ac_c" 1>&6 -echo "configure:1418: checking if the linker ($LD) is GNU ld" >&5 +echo "configure:1449: checking if the linker ($LD) is GNU ld" >&5 if eval "test \"`echo '$''{'ac_cv_prog_gnu_ld'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1430,7 +1461,7 @@ echo "$ac_t""$ac_cv_prog_gnu_ld" 1>&6 echo $ac_n "checking for BSD-compatible nm""... $ac_c" 1>&6 -echo "configure:1434: checking for BSD-compatible nm" >&5 +echo "configure:1465: checking for BSD-compatible nm" >&5 if eval "test \"`echo '$''{'ac_cv_path_NM'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1466,7 +1497,7 @@ NM="$ac_cv_path_NM" echo "$ac_t""$NM" 1>&6 echo $ac_n "checking whether ln -s works""... $ac_c" 1>&6 -echo "configure:1470: checking whether ln -s works" >&5 +echo "configure:1501: checking whether ln -s works" >&5 if eval "test \"`echo '$''{'ac_cv_prog_LN_S'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1515,8 +1546,8 @@ test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" case "$lt_target" in *-*-irix6*) # Find out which ABI we are using. - echo '#line 1519 "configure"' > conftest.$ac_ext - if { (eval echo configure:1520: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + echo '#line 1550 "configure"' > conftest.$ac_ext + if { (eval echo configure:1551: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then case "`/usr/bin/file conftest.o`" in *32-bit*) LD="${LD-ld} -32" @@ -1537,19 +1568,19 @@ case "$lt_target" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" echo $ac_n "checking whether the C compiler needs -belf""... $ac_c" 1>&6 -echo "configure:1541: checking whether the C compiler needs -belf" >&5 +echo "configure:1572: checking whether the C compiler needs -belf" >&5 if eval "test \"`echo '$''{'lt_cv_cc_needs_belf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1546 "configure" +#line 1577 "configure" #include "confdefs.h" int main() { ; return 0; } EOF -if { (eval echo configure:1553: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1584: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* lt_cv_cc_needs_belf=yes else @@ -1652,7 +1683,7 @@ exec 5>>./config.log echo $ac_n "checking for strerror in -lcposix""... $ac_c" 1>&6 -echo "configure:1656: checking for strerror in -lcposix" >&5 +echo "configure:1687: checking for strerror in -lcposix" >&5 ac_lib_var=`echo cposix'_'strerror | sed 'y%./+-%__p_%'` if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1660,7 +1691,7 @@ else ac_save_LIBS="$LIBS" LIBS="-lcposix $LIBS" cat > conftest.$ac_ext <<EOF -#line 1664 "configure" +#line 1695 "configure" #include "confdefs.h" /* Override any gcc2 internal prototype to avoid an error. */ /* We use char because int might match the return type of a gcc2 @@ -1671,7 +1702,7 @@ int main() { strerror() ; return 0; } EOF -if { (eval echo configure:1675: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:1706: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_lib_$ac_lib_var=yes" else @@ -1705,7 +1736,7 @@ fi # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" # ./install, which can be erroneously created by make from ./install.sh. echo $ac_n "checking for a BSD compatible install""... $ac_c" 1>&6 -echo "configure:1709: checking for a BSD compatible install" >&5 +echo "configure:1740: checking for a BSD compatible install" >&5 if test -z "$INSTALL"; then if eval "test \"`echo '$''{'ac_cv_path_install'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 @@ -1762,7 +1793,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:1766: checking for $ac_word" >&5 +echo "configure:1797: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_prog_YACC'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -1800,7 +1831,7 @@ EOF echo $ac_n "checking how to run the C preprocessor""... $ac_c" 1>&6 -echo "configure:1804: checking how to run the C preprocessor" >&5 +echo "configure:1835: checking how to run the C preprocessor" >&5 # On Suns, sometimes $CPP names a directory. if test -n "$CPP" && test -d "$CPP"; then CPP= @@ -1815,13 +1846,13 @@ else # On the NeXT, cc -E runs the code through the compiler's parser, # not just through cpp. cat > conftest.$ac_ext <<EOF -#line 1819 "configure" +#line 1850 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1825: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1856: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1832,13 +1863,13 @@ else rm -rf conftest* CPP="${CC-cc} -E -traditional-cpp" cat > conftest.$ac_ext <<EOF -#line 1836 "configure" +#line 1867 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1842: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1873: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1849,13 +1880,13 @@ else rm -rf conftest* CPP="${CC-cc} -nologo -E" cat > conftest.$ac_ext <<EOF -#line 1853 "configure" +#line 1884 "configure" #include "confdefs.h" #include <assert.h> Syntax Error EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1859: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1890: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then : @@ -1880,12 +1911,12 @@ fi echo "$ac_t""$CPP" 1>&6 echo $ac_n "checking for ANSI C header files""... $ac_c" 1>&6 -echo "configure:1884: checking for ANSI C header files" >&5 +echo "configure:1915: checking for ANSI C header files" >&5 if eval "test \"`echo '$''{'ac_cv_header_stdc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1889 "configure" +#line 1920 "configure" #include "confdefs.h" #include <stdlib.h> #include <stdarg.h> @@ -1893,7 +1924,7 @@ else #include <float.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:1897: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:1928: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -1910,7 +1941,7 @@ rm -f conftest* if test $ac_cv_header_stdc = yes; then # SunOS 4.x string.h does not declare mem*, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1914 "configure" +#line 1945 "configure" #include "confdefs.h" #include <string.h> EOF @@ -1928,7 +1959,7 @@ fi if test $ac_cv_header_stdc = yes; then # ISC 2.0.2 stdlib.h does not declare free, contrary to ANSI. cat > conftest.$ac_ext <<EOF -#line 1932 "configure" +#line 1963 "configure" #include "confdefs.h" #include <stdlib.h> EOF @@ -1949,7 +1980,7 @@ if test "$cross_compiling" = yes; then : else cat > conftest.$ac_ext <<EOF -#line 1953 "configure" +#line 1984 "configure" #include "confdefs.h" #include <ctype.h> #define ISLOWER(c) ('a' <= (c) && (c) <= 'z') @@ -1960,7 +1991,7 @@ if (XOR (islower (i), ISLOWER (i)) || toupper (i) != TOUPPER (i)) exit(2); exit (0); } EOF -if { (eval echo configure:1964: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:1995: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then : else @@ -1987,17 +2018,17 @@ for ac_hdr in limits.h malloc.h string.h unistd.h values.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:1991: checking for $ac_hdr" >&5 +echo "configure:2022: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 1996 "configure" +#line 2027 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2001: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:2032: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2025,12 +2056,12 @@ done echo $ac_n "checking for working const""... $ac_c" 1>&6 -echo "configure:2029: checking for working const" >&5 +echo "configure:2060: checking for working const" >&5 if eval "test \"`echo '$''{'ac_cv_c_const'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2034 "configure" +#line 2065 "configure" #include "confdefs.h" int main() { @@ -2079,7 +2110,7 @@ ccp = (char const *const *) p; ; return 0; } EOF -if { (eval echo configure:2083: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2114: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_const=yes else @@ -2100,21 +2131,21 @@ EOF fi echo $ac_n "checking for inline""... $ac_c" 1>&6 -echo "configure:2104: checking for inline" >&5 +echo "configure:2135: checking for inline" >&5 if eval "test \"`echo '$''{'ac_cv_c_inline'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else ac_cv_c_inline=no for ac_kw in inline __inline__ __inline; do cat > conftest.$ac_ext <<EOF -#line 2111 "configure" +#line 2142 "configure" #include "confdefs.h" int main() { } $ac_kw foo() { ; return 0; } EOF -if { (eval echo configure:2118: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2149: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_inline=$ac_kw; break else @@ -2141,12 +2172,12 @@ esac echo $ac_n "checking whether backslash-a works in strings""... $ac_c" 1>&6 -echo "configure:2145: checking whether backslash-a works in strings" >&5 +echo "configure:2176: checking whether backslash-a works in strings" >&5 if eval "test \"`echo '$''{'ac_cv_c_backslash_a'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2150 "configure" +#line 2181 "configure" #include "confdefs.h" int main() { @@ -2160,7 +2191,7 @@ int main() { ; return 0; } EOF -if { (eval echo configure:2164: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2195: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* ac_cv_c_backslash_a=yes else @@ -2180,13 +2211,48 @@ EOF fi + + echo $ac_n "checking for unsigned long long""... $ac_c" 1>&6 +echo "configure:2217: checking for unsigned long long" >&5 +if eval "test \"`echo '$''{'ac_cv_type_unsigned_long_long'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2222 "configure" +#include "confdefs.h" +unsigned long long ull = 1; int i = 63; +int main() { +unsigned long long ullmax = (unsigned long long) -1; + return ull << i | ull >> i | ullmax / ull | ullmax % ull; +; return 0; } +EOF +if { (eval echo configure:2230: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then + rm -rf conftest* + ac_cv_type_unsigned_long_long=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + ac_cv_type_unsigned_long_long=no +fi +rm -f conftest* +fi + +echo "$ac_t""$ac_cv_type_unsigned_long_long" 1>&6 + if test $ac_cv_type_unsigned_long_long = yes; then + cat >> confdefs.h <<\EOF +#define HAVE_UNSIGNED_LONG_LONG 1 +EOF + + fi + echo $ac_n "checking for off_t""... $ac_c" 1>&6 -echo "configure:2185: checking for off_t" >&5 +echo "configure:2251: checking for off_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_off_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2190 "configure" +#line 2256 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -2214,12 +2280,12 @@ EOF fi echo $ac_n "checking for size_t""... $ac_c" 1>&6 -echo "configure:2218: checking for size_t" >&5 +echo "configure:2284: checking for size_t" >&5 if eval "test \"`echo '$''{'ac_cv_type_size_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2223 "configure" +#line 2289 "configure" #include "confdefs.h" #include <sys/types.h> #if STDC_HEADERS @@ -2247,19 +2313,19 @@ EOF fi echo $ac_n "checking for ptrdiff_t""... $ac_c" 1>&6 -echo "configure:2251: checking for ptrdiff_t" >&5 +echo "configure:2317: checking for ptrdiff_t" >&5 if eval "test \"`echo '$''{'am_cv_type_ptrdiff_t'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2256 "configure" +#line 2322 "configure" #include "confdefs.h" #include <stddef.h> int main() { ptrdiff_t p ; return 0; } EOF -if { (eval echo configure:2263: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then +if { (eval echo configure:2329: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then rm -rf conftest* am_cv_type_ptrdiff_t=yes else @@ -2280,22 +2346,70 @@ EOF fi + echo $ac_n "checking for inttypes.h""... $ac_c" 1>&6 +echo "configure:2351: checking for inttypes.h" >&5 +if eval "test \"`echo '$''{'jm_ac_cv_header_inttypes_h'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 2356 "configure" +#include "confdefs.h" +#include <sys/types.h> +#include <inttypes.h> +int main() { +uintmax_t i = (uintmax_t) -1; +; return 0; } +EOF +if { (eval echo configure:2364: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + jm_ac_cv_header_inttypes_h=yes +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + jm_ac_cv_header_inttypes_h=no +fi +rm -f conftest* +fi + +echo "$ac_t""$jm_ac_cv_header_inttypes_h" 1>&6 + if test $jm_ac_cv_header_inttypes_h = yes; then + cat >> confdefs.h <<EOF +#define HAVE_INTTYPES_H 1 +EOF + + fi + + + + if test $jm_ac_cv_header_inttypes_h = no; then + + test $ac_cv_type_unsigned_long_long = yes \ + && ac_type='unsigned long long' \ + || ac_type='unsigned long' + cat >> confdefs.h <<EOF +#define uintmax_t $ac_type +EOF + + fi + + # The Ultrix 4.2 mips builtin alloca declared by alloca.h only works # for constant arguments. Useless! echo $ac_n "checking for working alloca.h""... $ac_c" 1>&6 -echo "configure:2287: checking for working alloca.h" >&5 +echo "configure:2401: checking for working alloca.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_alloca_h'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2292 "configure" +#line 2406 "configure" #include "confdefs.h" #include <alloca.h> int main() { char *p = alloca(2 * sizeof(int)); ; return 0; } EOF -if { (eval echo configure:2299: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2413: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_header_alloca_h=yes else @@ -2316,12 +2430,12 @@ EOF fi echo $ac_n "checking for alloca""... $ac_c" 1>&6 -echo "configure:2320: checking for alloca" >&5 +echo "configure:2434: checking for alloca" >&5 if eval "test \"`echo '$''{'ac_cv_func_alloca_works'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2325 "configure" +#line 2439 "configure" #include "confdefs.h" #ifdef __GNUC__ @@ -2349,7 +2463,7 @@ int main() { char *p = (char *) alloca(1); ; return 0; } EOF -if { (eval echo configure:2353: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2467: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* ac_cv_func_alloca_works=yes else @@ -2381,12 +2495,12 @@ EOF echo $ac_n "checking whether alloca needs Cray hooks""... $ac_c" 1>&6 -echo "configure:2385: checking whether alloca needs Cray hooks" >&5 +echo "configure:2499: checking whether alloca needs Cray hooks" >&5 if eval "test \"`echo '$''{'ac_cv_os_cray'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2390 "configure" +#line 2504 "configure" #include "confdefs.h" #if defined(CRAY) && ! defined(CRAY2) webecray @@ -2411,12 +2525,12 @@ echo "$ac_t""$ac_cv_os_cray" 1>&6 if test $ac_cv_os_cray = yes; then for ac_func in _getb67 GETB67 getb67; do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2415: checking for $ac_func" >&5 +echo "configure:2529: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2420 "configure" +#line 2534 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2439,7 +2553,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2443: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2557: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2466,7 +2580,7 @@ done fi echo $ac_n "checking stack direction for C alloca""... $ac_c" 1>&6 -echo "configure:2470: checking stack direction for C alloca" >&5 +echo "configure:2584: checking stack direction for C alloca" >&5 if eval "test \"`echo '$''{'ac_cv_c_stack_direction'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2474,7 +2588,7 @@ else ac_cv_c_stack_direction=0 else cat > conftest.$ac_ext <<EOF -#line 2478 "configure" +#line 2592 "configure" #include "confdefs.h" find_stack_direction () { @@ -2493,7 +2607,7 @@ main () exit (find_stack_direction() < 0); } EOF -if { (eval echo configure:2497: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:2611: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_c_stack_direction=1 else @@ -2515,12 +2629,12 @@ EOF fi echo $ac_n "checking for vprintf""... $ac_c" 1>&6 -echo "configure:2519: checking for vprintf" >&5 +echo "configure:2633: checking for vprintf" >&5 if eval "test \"`echo '$''{'ac_cv_func_vprintf'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2524 "configure" +#line 2638 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char vprintf(); below. */ @@ -2543,7 +2657,7 @@ vprintf(); ; return 0; } EOF -if { (eval echo configure:2547: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2661: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_vprintf=yes" else @@ -2567,12 +2681,12 @@ fi if test "$ac_cv_func_vprintf" != yes; then echo $ac_n "checking for _doprnt""... $ac_c" 1>&6 -echo "configure:2571: checking for _doprnt" >&5 +echo "configure:2685: checking for _doprnt" >&5 if eval "test \"`echo '$''{'ac_cv_func__doprnt'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2576 "configure" +#line 2690 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char _doprnt(); below. */ @@ -2595,7 +2709,7 @@ _doprnt(); ; return 0; } EOF -if { (eval echo configure:2599: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2713: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func__doprnt=yes" else @@ -2622,12 +2736,12 @@ fi for ac_func in getcwd mblen memcpy strchr strerror uname do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2626: checking for $ac_func" >&5 +echo "configure:2740: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2631 "configure" +#line 2745 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2650,7 +2764,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2654: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2678,12 +2792,12 @@ for ac_func in getline memmove memset stpcpy stpncpy strcspn \ strncasecmp strstr strtoul vasprintf do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2682: checking for $ac_func" >&5 +echo "configure:2796: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2687 "configure" +#line 2801 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2706,7 +2820,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2710: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2824: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2736,12 +2850,12 @@ if test $ac_cv_func_getline != yes; then for ac_func in getdelim do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2740: checking for $ac_func" >&5 +echo "configure:2854: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2745 "configure" +#line 2859 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2764,7 +2878,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2768: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2882: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2791,12 +2905,12 @@ done fi echo $ac_n "checking for parse_printf_format""... $ac_c" 1>&6 -echo "configure:2795: checking for parse_printf_format" >&5 +echo "configure:2909: checking for parse_printf_format" >&5 if eval "test \"`echo '$''{'ac_cv_func_parse_printf_format'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2800 "configure" +#line 2914 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char parse_printf_format(); below. */ @@ -2819,7 +2933,7 @@ parse_printf_format(); ; return 0; } EOF -if { (eval echo configure:2823: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2937: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_parse_printf_format=yes" else @@ -2849,19 +2963,19 @@ else fi echo $ac_n "checking for error_at_line""... $ac_c" 1>&6 -echo "configure:2853: checking for error_at_line" >&5 +echo "configure:2967: checking for error_at_line" >&5 if eval "test \"`echo '$''{'am_cv_lib_error_at_line'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2858 "configure" +#line 2972 "configure" #include "confdefs.h" int main() { error_at_line(0, 0, "", 0, ""); ; return 0; } EOF -if { (eval echo configure:2865: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:2979: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_lib_error_at_line=yes else @@ -2879,21 +2993,106 @@ echo "$ac_t""$am_cv_lib_error_at_line" 1>&6 fi + +for ac_hdr in locale.h +do +ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` +echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 +echo "configure:3002: checking for $ac_hdr" >&5 +if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + cat > conftest.$ac_ext <<EOF +#line 3007 "configure" +#include "confdefs.h" +#include <$ac_hdr> +EOF +ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" +{ (eval echo configure:3012: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` +if test -z "$ac_err"; then + rm -rf conftest* + eval "ac_cv_header_$ac_safe=yes" +else + echo "$ac_err" >&5 + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + eval "ac_cv_header_$ac_safe=no" +fi +rm -f conftest* +fi +if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then + echo "$ac_t""yes" 1>&6 + ac_tr_hdr=HAVE_`echo $ac_hdr | sed 'y%abcdefghijklmnopqrstuvwxyz./-%ABCDEFGHIJKLMNOPQRSTUVWXYZ___%'` + cat >> confdefs.h <<EOF +#define $ac_tr_hdr 1 +EOF + +else + echo "$ac_t""no" 1>&6 +fi +done + +echo $ac_n "checking for setlocale declaration""... $ac_c" 1>&6 +echo "configure:3039: checking for setlocale declaration" >&5 +if eval "test \"`echo '$''{'gt_cv_proto_setlocale'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + +cat > conftest.$ac_ext <<EOF +#line 3045 "configure" +#include "confdefs.h" + +#include <stdlib.h> +#include <locale.h> +#if defined(__STDC__) || defined(__cplusplus) +char* setlocale (int category, char* locale); +#else +char* setlocale(); +#endif + +int main() { + +; return 0; } +EOF +if { (eval echo configure:3060: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + gt_cv_proto_setlocale_arg1="" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + gt_cv_proto_setlocale_arg1="const" +fi +rm -f conftest* +gt_cv_proto_setlocale="extern char* setlocale (int, $gt_cv_proto_setlocale_arg1 char*);" +fi + +gt_cv_proto_setlocale=`echo "$gt_cv_proto_setlocale" | tr -s ' ' | sed -e 's/( /(/'` +echo "$ac_t""${ac_t:- + }$gt_cv_proto_setlocale" 1>&6 +cat >> confdefs.h <<EOF +#define SETLOCALE_CONST $gt_cv_proto_setlocale_arg1 +EOF + + + for ac_hdr in unistd.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:2887: checking for $ac_hdr" >&5 +echo "configure:3086: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2892 "configure" +#line 3091 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:2897: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3096: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -2922,12 +3121,12 @@ done for ac_func in getpagesize do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:2926: checking for $ac_func" >&5 +echo "configure:3125: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 2931 "configure" +#line 3130 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -2950,7 +3149,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:2954: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3153: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -2975,7 +3174,7 @@ fi done echo $ac_n "checking for working mmap""... $ac_c" 1>&6 -echo "configure:2979: checking for working mmap" >&5 +echo "configure:3178: checking for working mmap" >&5 if eval "test \"`echo '$''{'ac_cv_func_mmap_fixed_mapped'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -2983,7 +3182,7 @@ else ac_cv_func_mmap_fixed_mapped=no else cat > conftest.$ac_ext <<EOF -#line 2987 "configure" +#line 3186 "configure" #include "confdefs.h" /* Thanks to Mike Haertel and Jim Avera for this test. @@ -3123,7 +3322,7 @@ main() } EOF -if { (eval echo configure:3127: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null +if { (eval echo configure:3326: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext} && (./conftest; exit) 2>/dev/null then ac_cv_func_mmap_fixed_mapped=yes else @@ -3151,17 +3350,17 @@ stdlib.h string.h unistd.h sys/param.h do ac_safe=`echo "$ac_hdr" | sed 'y%./+-%__p_%'` echo $ac_n "checking for $ac_hdr""... $ac_c" 1>&6 -echo "configure:3155: checking for $ac_hdr" >&5 +echo "configure:3354: checking for $ac_hdr" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3160 "configure" +#line 3359 "configure" #include "confdefs.h" #include <$ac_hdr> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3165: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3364: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3192,12 +3391,12 @@ setenv setlocale stpcpy strchr strcasecmp strdup tsearch \ __argz_count __argz_stringify __argz_next do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3196: checking for $ac_func" >&5 +echo "configure:3395: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3201 "configure" +#line 3400 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3220,7 +3419,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3224: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3423: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3247,7 +3446,7 @@ done echo $ac_n "checking for iconv""... $ac_c" 1>&6 -echo "configure:3251: checking for iconv" >&5 +echo "configure:3450: checking for iconv" >&5 if eval "test \"`echo '$''{'am_cv_func_iconv'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3255,7 +3454,7 @@ else am_cv_func_iconv="no, consider installing libiconv" am_cv_lib_iconv=no cat > conftest.$ac_ext <<EOF -#line 3259 "configure" +#line 3458 "configure" #include "confdefs.h" #include <stdlib.h> #include <iconv.h> @@ -3265,7 +3464,7 @@ iconv_t cd = iconv_open("",""); iconv_close(cd); ; return 0; } EOF -if { (eval echo configure:3269: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3468: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_func_iconv=yes else @@ -3277,7 +3476,7 @@ rm -f conftest* am_save_LIBS="$LIBS" LIBS="$LIBS -liconv" cat > conftest.$ac_ext <<EOF -#line 3281 "configure" +#line 3480 "configure" #include "confdefs.h" #include <stdlib.h> #include <iconv.h> @@ -3287,7 +3486,7 @@ iconv_t cd = iconv_open("",""); iconv_close(cd); ; return 0; } EOF -if { (eval echo configure:3291: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3490: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_lib_iconv=yes am_cv_func_iconv=yes @@ -3307,6 +3506,52 @@ echo "$ac_t""$am_cv_func_iconv" 1>&6 #define HAVE_ICONV 1 EOF + echo $ac_n "checking for iconv declaration""... $ac_c" 1>&6 +echo "configure:3511: checking for iconv declaration" >&5 + if eval "test \"`echo '$''{'am_cv_proto_iconv'+set}'`\" = set"; then + echo $ac_n "(cached) $ac_c" 1>&6 +else + + cat > conftest.$ac_ext <<EOF +#line 3517 "configure" +#include "confdefs.h" + +#include <stdlib.h> +#include <iconv.h> +extern +#ifdef __cplusplus +"C" +#endif +#if defined(__STDC__) || defined(__cplusplus) +size_t iconv (iconv_t cd, char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t* outbytesleft); +#else +size_t iconv(); +#endif + +int main() { + +; return 0; } +EOF +if { (eval echo configure:3536: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>&5; }; then + rm -rf conftest* + am_cv_proto_iconv_arg1="" +else + echo "configure: failed program was:" >&5 + cat conftest.$ac_ext >&5 + rm -rf conftest* + am_cv_proto_iconv_arg1="const" +fi +rm -f conftest* + am_cv_proto_iconv="extern size_t iconv (iconv_t cd, $am_cv_proto_iconv_arg1 char * *inbuf, size_t *inbytesleft, char * *outbuf, size_t* outbytesleft);" +fi + + am_cv_proto_iconv=`echo "$am_cv_proto_iconv" | tr -s ' ' | sed -e 's/( /(/'` + echo "$ac_t""${ac_t:- + }$am_cv_proto_iconv" 1>&6 + cat >> confdefs.h <<EOF +#define ICONV_CONST $am_cv_proto_iconv_arg1 +EOF + fi LIBICONV= if test "$am_cv_lib_iconv" = yes; then @@ -3316,19 +3561,19 @@ EOF echo $ac_n "checking for nl_langinfo and CODESET""... $ac_c" 1>&6 -echo "configure:3320: checking for nl_langinfo and CODESET" >&5 +echo "configure:3565: checking for nl_langinfo and CODESET" >&5 if eval "test \"`echo '$''{'am_cv_langinfo_codeset'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3325 "configure" +#line 3570 "configure" #include "confdefs.h" #include <langinfo.h> int main() { char* cs = nl_langinfo(CODESET); ; return 0; } EOF -if { (eval echo configure:3332: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3577: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_langinfo_codeset=yes else @@ -3351,19 +3596,19 @@ EOF if test $ac_cv_header_locale_h = yes; then echo $ac_n "checking for LC_MESSAGES""... $ac_c" 1>&6 -echo "configure:3355: checking for LC_MESSAGES" >&5 +echo "configure:3600: checking for LC_MESSAGES" >&5 if eval "test \"`echo '$''{'am_cv_val_LC_MESSAGES'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3360 "configure" +#line 3605 "configure" #include "confdefs.h" #include <locale.h> int main() { return LC_MESSAGES ; return 0; } EOF -if { (eval echo configure:3367: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3612: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* am_cv_val_LC_MESSAGES=yes else @@ -3384,7 +3629,7 @@ EOF fi fi echo $ac_n "checking whether NLS is requested""... $ac_c" 1>&6 -echo "configure:3388: checking whether NLS is requested" >&5 +echo "configure:3633: checking whether NLS is requested" >&5 # Check whether --enable-nls or --disable-nls was given. if test "${enable_nls+set}" = set; then enableval="$enable_nls" @@ -3396,6 +3641,7 @@ fi echo "$ac_t""$USE_NLS" 1>&6 + BUILD_INCLUDED_LIBINTL=no USE_INCLUDED_LIBINTL=no if test "$USE_NLS" = "yes"; then @@ -3404,7 +3650,7 @@ fi EOF echo $ac_n "checking whether included gettext is requested""... $ac_c" 1>&6 -echo "configure:3408: checking whether included gettext is requested" >&5 +echo "configure:3654: checking whether included gettext is requested" >&5 # Check whether --with-included-gettext or --without-included-gettext was given. if test "${with_included_gettext+set}" = set; then withval="$with_included_gettext" @@ -3417,23 +3663,21 @@ fi nls_cv_use_gnu_gettext="$nls_cv_force_use_gnu_gettext" if test "$nls_cv_force_use_gnu_gettext" != "yes"; then - nls_cv_header_intl= - nls_cv_header_libgt= - CATOBJEXT=NONE + CATOBJEXT=NONE ac_safe=`echo "libintl.h" | sed 'y%./+-%__p_%'` echo $ac_n "checking for libintl.h""... $ac_c" 1>&6 -echo "configure:3427: checking for libintl.h" >&5 +echo "configure:3671: checking for libintl.h" >&5 if eval "test \"`echo '$''{'ac_cv_header_$ac_safe'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3432 "configure" +#line 3676 "configure" #include "confdefs.h" #include <libintl.h> EOF ac_try="$ac_cpp conftest.$ac_ext >/dev/null 2>conftest.out" -{ (eval echo configure:3437: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } +{ (eval echo configure:3681: \"$ac_try\") 1>&5; (eval $ac_try) 2>&5; } ac_err=`grep -v '^ *+' conftest.out | grep -v "^conftest.${ac_ext}\$"` if test -z "$ac_err"; then rm -rf conftest* @@ -3449,126 +3693,71 @@ rm -f conftest* fi if eval "test \"`echo '$ac_cv_header_'$ac_safe`\" = yes"; then echo "$ac_t""yes" 1>&6 - echo $ac_n "checking for gettext in libc""... $ac_c" 1>&6 -echo "configure:3454: checking for gettext in libc" >&5 -if eval "test \"`echo '$''{'gt_cv_func_gettext_libc'+set}'`\" = set"; then + echo $ac_n "checking for GNU gettext in libc""... $ac_c" 1>&6 +echo "configure:3698: checking for GNU gettext in libc" >&5 +if eval "test \"`echo '$''{'gt_cv_func_gnugettext_libc'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3459 "configure" +#line 3703 "configure" #include "confdefs.h" #include <libintl.h> +extern int _nl_msg_cat_cntr; int main() { -return (int) gettext ("") +bindtextdomain ("", ""); +return (int) gettext ("") + _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:3466: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3712: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* - gt_cv_func_gettext_libc=yes + gt_cv_func_gnugettext_libc=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* - gt_cv_func_gettext_libc=no + gt_cv_func_gnugettext_libc=no fi rm -f conftest* fi -echo "$ac_t""$gt_cv_func_gettext_libc" 1>&6 - - if test "$gt_cv_func_gettext_libc" != "yes"; then - echo $ac_n "checking for bindtextdomain in -lintl""... $ac_c" 1>&6 -echo "configure:3482: checking for bindtextdomain in -lintl" >&5 -ac_lib_var=`echo intl'_'bindtextdomain | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lintl $LIBS" -cat > conftest.$ac_ext <<EOF -#line 3490 "configure" -#include "confdefs.h" -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char bindtextdomain(); - -int main() { -bindtextdomain() -; return 0; } -EOF -if { (eval echo configure:3501: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" +echo "$ac_t""$gt_cv_func_gnugettext_libc" 1>&6 -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - echo $ac_n "checking for gettext in libintl""... $ac_c" 1>&6 -echo "configure:3517: checking for gettext in libintl" >&5 -if eval "test \"`echo '$''{'gt_cv_func_gettext_libintl'+set}'`\" = set"; then + if test "$gt_cv_func_gnugettext_libc" != "yes"; then + echo $ac_n "checking for GNU gettext in libintl""... $ac_c" 1>&6 +echo "configure:3728: checking for GNU gettext in libintl" >&5 +if eval "test \"`echo '$''{'gt_cv_func_gnugettext_libintl'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else - echo $ac_n "checking for gettext in -lintl""... $ac_c" 1>&6 -echo "configure:3522: checking for gettext in -lintl" >&5 -ac_lib_var=`echo intl'_'gettext | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-lintl $LIBS" -cat > conftest.$ac_ext <<EOF -#line 3530 "configure" + gt_save_LIBS="$LIBS" + LIBS="$LIBS -lintl" + cat > conftest.$ac_ext <<EOF +#line 3735 "configure" #include "confdefs.h" -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char gettext(); - +#include <libintl.h> +extern int _nl_msg_cat_cntr; int main() { -gettext() +bindtextdomain ("", ""); +return (int) gettext ("") + _nl_msg_cat_cntr ; return 0; } EOF -if { (eval echo configure:3541: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3744: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" + gt_cv_func_gnugettext_libintl=yes else echo "configure: failed program was:" >&5 cat conftest.$ac_ext >&5 rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" + gt_cv_func_gnugettext_libintl=no fi rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - gt_cv_func_gettext_libintl=yes -else - echo "$ac_t""no" 1>&6 -gt_cv_func_gettext_libintl=no -fi - -fi - -echo "$ac_t""$gt_cv_func_gettext_libintl" 1>&6 -else - echo "$ac_t""no" 1>&6 + LIBS="$gt_save_LIBS" fi +echo "$ac_t""$gt_cv_func_gnugettext_libintl" 1>&6 fi - if test "$gt_cv_func_gettext_libc" = "yes" \ - || test "$gt_cv_func_gettext_libintl" = "yes"; then + if test "$gt_cv_func_gnugettext_libc" = "yes" \ + || test "$gt_cv_func_gnugettext_libintl" = "yes"; then cat >> confdefs.h <<\EOF #define HAVE_GETTEXT 1 EOF @@ -3576,7 +3765,7 @@ EOF # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3580: checking for $ac_word" >&5 +echo "configure:3769: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3610,12 +3799,12 @@ fi for ac_func in dcgettext do echo $ac_n "checking for $ac_func""... $ac_c" 1>&6 -echo "configure:3614: checking for $ac_func" >&5 +echo "configure:3803: checking for $ac_func" >&5 if eval "test \"`echo '$''{'ac_cv_func_$ac_func'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else cat > conftest.$ac_ext <<EOF -#line 3619 "configure" +#line 3808 "configure" #include "confdefs.h" /* System header to define __stub macros and hopefully few prototypes, which can conflict with char $ac_func(); below. */ @@ -3638,7 +3827,7 @@ $ac_func(); ; return 0; } EOF -if { (eval echo configure:3642: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then +if { (eval echo configure:3831: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then rm -rf conftest* eval "ac_cv_func_$ac_func=yes" else @@ -3665,7 +3854,7 @@ done # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3669: checking for $ac_word" >&5 +echo "configure:3858: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3701,7 +3890,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3705: checking for $ac_word" >&5 +echo "configure:3894: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -3732,28 +3921,10 @@ else echo "$ac_t""no" 1>&6 fi - cat > conftest.$ac_ext <<EOF -#line 3737 "configure" -#include "confdefs.h" - -int main() { -extern int _nl_msg_cat_cntr; - return _nl_msg_cat_cntr -; return 0; } -EOF -if { (eval echo configure:3745: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - CATOBJEXT=.gmo - DATADIRNAME=share -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - CATOBJEXT=.mo - DATADIRNAME=lib -fi -rm -f conftest* - INSTOBJEXT=.mo + CATOBJEXT=.gmo + fi + if test "$gt_cv_func_gnugettext_libintl" = "yes"; then + INTLLIBS="-lintl" fi fi @@ -3762,272 +3933,6 @@ else fi - - if test "$CATOBJEXT" = "NONE"; then - echo $ac_n "checking whether catgets can be used""... $ac_c" 1>&6 -echo "configure:3769: checking whether catgets can be used" >&5 - # Check whether --with-catgets or --without-catgets was given. -if test "${with_catgets+set}" = set; then - withval="$with_catgets" - nls_cv_use_catgets=$withval -else - nls_cv_use_catgets=no -fi - - echo "$ac_t""$nls_cv_use_catgets" 1>&6 - - if test "$nls_cv_use_catgets" = "yes"; then - echo $ac_n "checking for main in -li""... $ac_c" 1>&6 -echo "configure:3782: checking for main in -li" >&5 -ac_lib_var=`echo i'_'main | sed 'y%./+-%__p_%'` -if eval "test \"`echo '$''{'ac_cv_lib_$ac_lib_var'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - ac_save_LIBS="$LIBS" -LIBS="-li $LIBS" -cat > conftest.$ac_ext <<EOF -#line 3790 "configure" -#include "confdefs.h" - -int main() { -main() -; return 0; } -EOF -if { (eval echo configure:3797: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_lib_$ac_lib_var=no" -fi -rm -f conftest* -LIBS="$ac_save_LIBS" - -fi -if eval "test \"`echo '$ac_cv_lib_'$ac_lib_var`\" = yes"; then - echo "$ac_t""yes" 1>&6 - ac_tr_lib=HAVE_LIB`echo i | sed -e 's/[^a-zA-Z0-9_]/_/g' \ - -e 'y/abcdefghijklmnopqrstuvwxyz/ABCDEFGHIJKLMNOPQRSTUVWXYZ/'` - cat >> confdefs.h <<EOF -#define $ac_tr_lib 1 -EOF - - LIBS="-li $LIBS" - -else - echo "$ac_t""no" 1>&6 -fi - - echo $ac_n "checking for catgets""... $ac_c" 1>&6 -echo "configure:3825: checking for catgets" >&5 -if eval "test \"`echo '$''{'ac_cv_func_catgets'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - cat > conftest.$ac_ext <<EOF -#line 3830 "configure" -#include "confdefs.h" -/* System header to define __stub macros and hopefully few prototypes, - which can conflict with char catgets(); below. */ -#include <assert.h> -/* Override any gcc2 internal prototype to avoid an error. */ -/* We use char because int might match the return type of a gcc2 - builtin and then its argument prototype would still apply. */ -char catgets(); - -int main() { - -/* The GNU C library defines this for functions which it implements - to always fail with ENOSYS. Some functions are actually named - something starting with __ and the normal name is an alias. */ -#if defined (__stub_catgets) || defined (__stub___catgets) -choke me -#else -catgets(); -#endif - -; return 0; } -EOF -if { (eval echo configure:3853: \"$ac_link\") 1>&5; (eval $ac_link) 2>&5; } && test -s conftest${ac_exeext}; then - rm -rf conftest* - eval "ac_cv_func_catgets=yes" -else - echo "configure: failed program was:" >&5 - cat conftest.$ac_ext >&5 - rm -rf conftest* - eval "ac_cv_func_catgets=no" -fi -rm -f conftest* -fi - -if eval "test \"`echo '$ac_cv_func_'catgets`\" = yes"; then - echo "$ac_t""yes" 1>&6 - cat >> confdefs.h <<\EOF -#define HAVE_CATGETS 1 -EOF - - INTLOBJS="\$(CATOBJS)" - # Extract the first word of "gencat", so it can be a program name with args. -set dummy gencat; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3875: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_GENCAT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$GENCAT" in - /*) - ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a path. - ;; - ?:/*) - ac_cv_path_GENCAT="$GENCAT" # Let the user override the test with a dos path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_GENCAT="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_GENCAT" && ac_cv_path_GENCAT="no" - ;; -esac -fi -GENCAT="$ac_cv_path_GENCAT" -if test -n "$GENCAT"; then - echo "$ac_t""$GENCAT" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - if test "$GENCAT" != "no"; then - # Extract the first word of "gmsgfmt", so it can be a program name with args. -set dummy gmsgfmt; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3911: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$GMSGFMT" in - /*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - ?:/*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a dos path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" - ac_dummy="$PATH" - for ac_dir in $ac_dummy; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - ac_cv_path_GMSGFMT="$ac_dir/$ac_word" - break - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no" - ;; -esac -fi -GMSGFMT="$ac_cv_path_GMSGFMT" -if test -n "$GMSGFMT"; then - echo "$ac_t""$GMSGFMT" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - if test "$GMSGFMT" = "no"; then - # Extract the first word of "msgfmt", so it can be a program name with args. -set dummy msgfmt; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3948: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$GMSGFMT" in - /*) - ac_cv_path_GMSGFMT="$GMSGFMT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep 'dv '`"; then - ac_cv_path_GMSGFMT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_GMSGFMT" && ac_cv_path_GMSGFMT="no" - ;; -esac -fi -GMSGFMT="$ac_cv_path_GMSGFMT" -if test -n "$GMSGFMT"; then - echo "$ac_t""$GMSGFMT" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - fi - # Extract the first word of "xgettext", so it can be a program name with args. -set dummy xgettext; ac_word=$2 -echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:3983: checking for $ac_word" >&5 -if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then - echo $ac_n "(cached) $ac_c" 1>&6 -else - case "$XGETTEXT" in - /*) - ac_cv_path_XGETTEXT="$XGETTEXT" # Let the user override the test with a path. - ;; - *) - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/$ac_word; then - if test -z "`$ac_dir/$ac_word -h 2>&1 | grep '(HELP)'`"; then - ac_cv_path_XGETTEXT="$ac_dir/$ac_word" - break - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_XGETTEXT" && ac_cv_path_XGETTEXT=":" - ;; -esac -fi -XGETTEXT="$ac_cv_path_XGETTEXT" -if test -n "$XGETTEXT"; then - echo "$ac_t""$XGETTEXT" 1>&6 -else - echo "$ac_t""no" 1>&6 -fi - - USE_INCLUDED_LIBINTL=yes - CATOBJEXT=.cat - INSTOBJEXT=.cat - DATADIRNAME=lib - INTLDEPS='$(top_builddir)/intl/libintl.a' - INTLLIBS=$INTLDEPS - LIBS=`echo $LIBS | sed -e 's/-lintl//'` - nls_cv_header_intl=intl/libintl.h - nls_cv_header_libgt=intl/libgettext.h - fi -else - echo "$ac_t""no" 1>&6 -fi - - fi - fi - - if test "$CATOBJEXT" = "NONE"; then nls_cv_use_gnu_gettext=yes fi @@ -4038,7 +3943,7 @@ fi # Extract the first word of "msgfmt", so it can be a program name with args. set dummy msgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4042: checking for $ac_word" >&5 +echo "configure:3947: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_MSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4072,7 +3977,7 @@ fi # Extract the first word of "gmsgfmt", so it can be a program name with args. set dummy gmsgfmt; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4076: checking for $ac_word" >&5 +echo "configure:3981: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_GMSGFMT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4108,7 +4013,7 @@ fi # Extract the first word of "xgettext", so it can be a program name with args. set dummy xgettext; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4112: checking for $ac_word" >&5 +echo "configure:4017: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_XGETTEXT'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4140,15 +4045,11 @@ else fi + BUILD_INCLUDED_LIBINTL=yes USE_INCLUDED_LIBINTL=yes CATOBJEXT=.gmo - INSTOBJEXT=.mo - DATADIRNAME=share - INTLDEPS='$(top_builddir)/intl/libintl.a' - INTLLIBS=$INTLDEPS - LIBS=`echo $LIBS | sed -e 's/-lintl//'` - nls_cv_header_intl=intl/libintl.h - nls_cv_header_libgt=intl/libgettext.h + INTLLIBS='$(top_builddir)/intl/libintl.la' + LIBS=`echo " $LIBS " | sed -e 's/ -lintl / /' -e 's/^ //' -e 's/ $//'` fi if test "$XGETTEXT" != ":"; then @@ -4162,20 +4063,14 @@ fi # We need to process the po/ directory. POSUB=po - else - DATADIRNAME=share - nls_cv_header_intl=intl/libintl.h - nls_cv_header_libgt=intl/libgettext.h fi - - # If this is used in GNU gettext we have to set USE_NLS to `yes' - # because some of the sources are only built for this goal. + # If this is used in GNU gettext we have to set BUILD_INCLUDED_LIBINTL + # to 'yes' because some of the testsuite requires it. if test "$PACKAGE" = gettext; then - USE_NLS=yes - USE_INCLUDED_LIBINTL=yes + BUILD_INCLUDED_LIBINTL=yes fi for lang in $ALL_LINGUAS; do @@ -4192,7 +4087,11 @@ fi - + + nls_cv_header_intl= + nls_cv_header_libgt= + + DATADIRNAME=share @@ -4201,12 +4100,23 @@ fi LINGUAS= else echo $ac_n "checking for catalogs to be installed""... $ac_c" 1>&6 -echo "configure:4205: checking for catalogs to be installed" >&5 +echo "configure:4104: checking for catalogs to be installed" >&5 NEW_LINGUAS= - for lang in ${LINGUAS=$ALL_LINGUAS}; do - case "$ALL_LINGUAS" in - *$lang*) NEW_LINGUAS="$NEW_LINGUAS $lang" ;; - esac + for presentlang in $ALL_LINGUAS; do + useit=no + for desiredlang in ${LINGUAS-$ALL_LINGUAS}; do + # Use the presentlang catalog if desiredlang is + # a. equal to presentlang, or + # b. a variant of presentlang (because in this case, + # presentlang can be used as a fallback for messages + # which are not translated in the desiredlang catalog). + case "$desiredlang" in + "$presentlang"*) useit=yes;; + esac + done + if test $useit = yes; then + NEW_LINGUAS="$NEW_LINGUAS $presentlang" + fi done LINGUAS=$NEW_LINGUAS echo "$ac_t""$LINGUAS" 1>&6 @@ -4217,31 +4127,6 @@ echo "configure:4205: checking for catalogs to be installed" >&5 fi fi - if test $ac_cv_header_locale_h = yes; then - INCLUDE_LOCALE_H="#include <locale.h>" - else - INCLUDE_LOCALE_H="\ -/* The system does not provide the header <locale.h>. Take care yourself. */" - fi - - - test -d intl || mkdir intl - if test "$CATOBJEXT" = ".cat"; then - sed -e '/^#/d' $srcdir/intl/po2msg.sin > intl/po2msg.sed - fi - sed -e '/^#.*[^\\]$/d' -e '/^#$/d' \ - $srcdir/intl/po2tbl.sin > intl/po2tbl.sed - - if test "$PACKAGE" = "gettext"; then - GT_NO="#NO#" - GT_YES= - else - GT_NO= - GT_YES="#YES#" - fi - - - MKINSTALLDIRS= if test -n "$ac_aux_dir"; then MKINSTALLDIRS="$ac_aux_dir/mkinstalldirs" @@ -4251,7 +4136,7 @@ echo "configure:4205: checking for catalogs to be installed" >&5 fi - l= + INTL_LIBTOOL_SUFFIX_PREFIX=l if test -d $srcdir/po; then @@ -4279,7 +4164,7 @@ do # Extract the first word of "$ac_prog", so it can be a program name with args. set dummy $ac_prog; ac_word=$2 echo $ac_n "checking for $ac_word""... $ac_c" 1>&6 -echo "configure:4283: checking for $ac_word" >&5 +echo "configure:4168: checking for $ac_word" >&5 if eval "test \"`echo '$''{'ac_cv_path_EMACS'+set}'`\" = set"; then echo $ac_n "(cached) $ac_c" 1>&6 else @@ -4317,7 +4202,7 @@ test -n "$EMACS" || EMACS="no" if test $EMACS != "no"; then echo $ac_n "checking where .elc files should go""... $ac_c" 1>&6 -echo "configure:4321: checking where .elc files should go" >&5 +echo "configure:4206: checking where .elc files should go" >&5 lispdir="\$(datadir)/emacs/site-lisp" emacs_flavor=`echo "$EMACS" | sed -e 's,^.*/,,'` if test "x$prefix" = "xNONE"; then @@ -4454,7 +4339,7 @@ ac_given_INSTALL="$INSTALL" trap 'rm -fr `echo "Makefile lib/Makefile intl/Makefile src/Makefile \ po/Makefile.in doc/Makefile tests/Makefile m4/Makefile \ - misc/Makefile misc/gettextize intl/intlh.inst config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 + misc/Makefile misc/gettextize config.h" | sed "s/:[^ ]*//g"` conftest*; exit 1' 1 2 15 EOF cat >> $CONFIG_STATUS <<EOF @@ -4520,23 +4405,18 @@ s%@USE_NLS@%$USE_NLS%g s%@MSGFMT@%$MSGFMT%g s%@GMSGFMT@%$GMSGFMT%g s%@XGETTEXT@%$XGETTEXT%g -s%@GENCAT@%$GENCAT%g +s%@BUILD_INCLUDED_LIBINTL@%$BUILD_INCLUDED_LIBINTL%g s%@USE_INCLUDED_LIBINTL@%$USE_INCLUDED_LIBINTL%g s%@CATALOGS@%$CATALOGS%g s%@CATOBJEXT@%$CATOBJEXT%g -s%@DATADIRNAME@%$DATADIRNAME%g s%@GMOFILES@%$GMOFILES%g -s%@INSTOBJEXT@%$INSTOBJEXT%g -s%@INTLDEPS@%$INTLDEPS%g s%@INTLLIBS@%$INTLLIBS%g s%@INTLOBJS@%$INTLOBJS%g s%@POFILES@%$POFILES%g s%@POSUB@%$POSUB%g -s%@INCLUDE_LOCALE_H@%$INCLUDE_LOCALE_H%g -s%@GT_NO@%$GT_NO%g -s%@GT_YES@%$GT_YES%g +s%@DATADIRNAME@%$DATADIRNAME%g s%@MKINSTALLDIRS@%$MKINSTALLDIRS%g -s%@l@%$l%g +s%@INTL_LIBTOOL_SUFFIX_PREFIX@%$INTL_LIBTOOL_SUFFIX_PREFIX%g s%@EMACS@%$EMACS%g s%@lispdir@%$lispdir%g s%@ACLOCAL_VERSION@%$ACLOCAL_VERSION%g @@ -4584,7 +4464,7 @@ cat >> $CONFIG_STATUS <<EOF CONFIG_FILES=\${CONFIG_FILES-"Makefile lib/Makefile intl/Makefile src/Makefile \ po/Makefile.in doc/Makefile tests/Makefile m4/Makefile \ - misc/Makefile misc/gettextize intl/intlh.inst"} + misc/Makefile misc/gettextize"} EOF cat >> $CONFIG_STATUS <<\EOF for ac_file in .. $CONFIG_FILES; do if test "x$ac_file" != x..; then @@ -4751,51 +4631,6 @@ cat >> $CONFIG_STATUS <<\EOF fi; done EOF - -cat >> $CONFIG_STATUS <<EOF -ac_sources="$nls_cv_header_libgt" -ac_dests="$nls_cv_header_intl" -EOF - -cat >> $CONFIG_STATUS <<\EOF -srcdir=$ac_given_srcdir -while test -n "$ac_sources"; do - set $ac_dests; ac_dest=$1; shift; ac_dests=$* - set $ac_sources; ac_source=$1; shift; ac_sources=$* - - echo "linking $srcdir/$ac_source to $ac_dest" - - if test ! -r $srcdir/$ac_source; then - { echo "configure: error: $srcdir/$ac_source: File not found" 1>&2; exit 1; } - fi - rm -f $ac_dest - - # Make relative symlinks. - # Remove last slash and all that follows it. Not all systems have dirname. - ac_dest_dir=`echo $ac_dest|sed 's%/[^/][^/]*$%%'` - if test "$ac_dest_dir" != "$ac_dest" && test "$ac_dest_dir" != .; then - # The dest file is in a subdirectory. - test ! -d "$ac_dest_dir" && mkdir "$ac_dest_dir" - ac_dest_dir_suffix="/`echo $ac_dest_dir|sed 's%^\./%%'`" - # A "../" for each directory in $ac_dest_dir_suffix. - ac_dots=`echo $ac_dest_dir_suffix|sed 's%/[^/]*%../%g'` - else - ac_dest_dir_suffix= ac_dots= - fi - - case "$srcdir" in - [/$]*) ac_rel_source="$srcdir/$ac_source" ;; - *) ac_rel_source="$ac_dots$srcdir/$ac_source" ;; - esac - - # Make a symlink if possible; otherwise try a hard link. - if ln -s $ac_rel_source $ac_dest 2>/dev/null || - ln $srcdir/$ac_source $ac_dest; then : - else - { echo "configure: error: can not link $ac_dest to $srcdir/$ac_source" 1>&2; exit 1; } - fi -done -EOF cat >> $CONFIG_STATUS <<EOF @@ -4803,7 +4638,7 @@ cat >> $CONFIG_STATUS <<EOF EOF cat >> $CONFIG_STATUS <<\EOF test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h -case "$CONFIG_FILES" in *po/Makefile.in*) +case " $CONFIG_FILES " in *" po/Makefile.in "*) sed -e "/POTFILES =/r po/POTFILES" po/Makefile.in > po/Makefile esac |