From 893912bfc2683463dc3e2c445336752d012563d3 Mon Sep 17 00:00:00 2001
From: The Android Open Source Project <initial-contribution@android.com>
Date: Tue, 3 Mar 2009 19:30:05 -0800
Subject: auto import from //depot/cupcake/@135843

---
 pnggccrd.c | 103 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
 1 file changed, 103 insertions(+)
 create mode 100644 pnggccrd.c

(limited to 'pnggccrd.c')

diff --git a/pnggccrd.c b/pnggccrd.c
new file mode 100644
index 0000000..e61523e
--- /dev/null
+++ b/pnggccrd.c
@@ -0,0 +1,103 @@
+/* pnggccrd.c was removed from libpng-1.2.20. */
+
+/* This code snippet is for use by configure's compilation test. */
+
+#if (!defined _MSC_VER) && \
+    defined(PNG_ASSEMBLER_CODE_SUPPORTED) && \
+    defined(PNG_MMX_CODE_SUPPORTED)
+
+int PNGAPI png_dummy_mmx_support(void);
+
+static int _mmx_supported = 2; // 0: no MMX; 1: MMX supported; 2: not tested
+
+int PNGAPI
+png_dummy_mmx_support(void) __attribute__((noinline));
+
+int PNGAPI
+png_dummy_mmx_support(void)
+{
+   int result;
+#if defined(PNG_MMX_CODE_SUPPORTED)  // superfluous, but what the heck
+    __asm__ __volatile__ (
+#if defined(__x86_64__)
+        "pushq %%rbx          \n\t"  // rbx gets clobbered by CPUID instruction
+        "pushq %%rcx          \n\t"  // so does rcx...
+        "pushq %%rdx          \n\t"  // ...and rdx (but rcx & rdx safe on Linux)
+        "pushfq               \n\t"  // save Eflag to stack
+        "popq %%rax           \n\t"  // get Eflag from stack into rax
+        "movq %%rax, %%rcx    \n\t"  // make another copy of Eflag in rcx
+        "xorl $0x200000, %%eax \n\t" // toggle ID bit in Eflag (i.e., bit 21)
+        "pushq %%rax          \n\t"  // save modified Eflag back to stack
+        "popfq                \n\t"  // restore modified value to Eflag reg
+        "pushfq               \n\t"  // save Eflag to stack
+        "popq %%rax           \n\t"  // get Eflag from stack
+        "pushq %%rcx          \n\t"  // save original Eflag to stack
+        "popfq                \n\t"  // restore original Eflag
+#else
+        "pushl %%ebx          \n\t"  // ebx gets clobbered by CPUID instruction
+        "pushl %%ecx          \n\t"  // so does ecx...
+        "pushl %%edx          \n\t"  // ...and edx (but ecx & edx safe on Linux)
+        "pushfl               \n\t"  // save Eflag to stack
+        "popl %%eax           \n\t"  // get Eflag from stack into eax
+        "movl %%eax, %%ecx    \n\t"  // make another copy of Eflag in ecx
+        "xorl $0x200000, %%eax \n\t" // toggle ID bit in Eflag (i.e., bit 21)
+        "pushl %%eax          \n\t"  // save modified Eflag back to stack
+        "popfl                \n\t"  // restore modified value to Eflag reg
+        "pushfl               \n\t"  // save Eflag to stack
+        "popl %%eax           \n\t"  // get Eflag from stack
+        "pushl %%ecx          \n\t"  // save original Eflag to stack
+        "popfl                \n\t"  // restore original Eflag
+#endif
+        "xorl %%ecx, %%eax    \n\t"  // compare new Eflag with original Eflag
+        "jz 0f                \n\t"  // if same, CPUID instr. is not supported
+
+        "xorl %%eax, %%eax    \n\t"  // set eax to zero
+//      ".byte  0x0f, 0xa2    \n\t"  // CPUID instruction (two-byte opcode)
+        "cpuid                \n\t"  // get the CPU identification info
+        "cmpl $1, %%eax       \n\t"  // make sure eax return non-zero value
+        "jl 0f                \n\t"  // if eax is zero, MMX is not supported
+
+        "xorl %%eax, %%eax    \n\t"  // set eax to zero and...
+        "incl %%eax           \n\t"  // ...increment eax to 1.  This pair is
+                                     // faster than the instruction "mov eax, 1"
+        "cpuid                \n\t"  // get the CPU identification info again
+        "andl $0x800000, %%edx \n\t" // mask out all bits but MMX bit (23)
+        "cmpl $0, %%edx       \n\t"  // 0 = MMX not supported
+        "jz 0f                \n\t"  // non-zero = yes, MMX IS supported
+
+        "movl $1, %%eax       \n\t"  // set return value to 1
+        "jmp  1f              \n\t"  // DONE:  have MMX support
+
+    "0:                       \n\t"  // .NOT_SUPPORTED: target label for jump instructions
+        "movl $0, %%eax       \n\t"  // set return value to 0
+    "1:                       \n\t"  // .RETURN: target label for jump instructions
+#if defined(__x86_64__)
+        "popq %%rdx           \n\t"  // restore rdx
+        "popq %%rcx           \n\t"  // restore rcx
+        "popq %%rbx           \n\t"  // restore rbx
+#else
+        "popl %%edx           \n\t"  // restore edx
+        "popl %%ecx           \n\t"  // restore ecx
+        "popl %%ebx           \n\t"  // restore ebx
+#endif
+
+//      "ret                  \n\t"  // DONE:  no MMX support
+                                     // (fall through to standard C "ret")
+
+        : "=a" (result)              // output list
+
+        :                            // any variables used on input (none)
+
+                                     // no clobber list
+//      , "%ebx", "%ecx", "%edx"     // GRR:  we handle these manually
+//      , "memory"   // if write to a variable gcc thought was in a reg
+//      , "cc"       // "condition codes" (flag bits)
+    );
+    _mmx_supported = result;
+#else
+    _mmx_supported = 0;
+#endif /* PNG_MMX_CODE_SUPPORTED */
+
+    return _mmx_supported;
+}
+#endif
-- 
cgit v1.1