diff options
Diffstat (limited to 'test/functional-tests/PfwTestCase/Types/tBit_Block.py')
| -rw-r--r-- | test/functional-tests/PfwTestCase/Types/tBit_Block.py | 319 |
1 files changed, 319 insertions, 0 deletions
diff --git a/test/functional-tests/PfwTestCase/Types/tBit_Block.py b/test/functional-tests/PfwTestCase/Types/tBit_Block.py new file mode 100644 index 0000000..6ea87bf --- /dev/null +++ b/test/functional-tests/PfwTestCase/Types/tBit_Block.py @@ -0,0 +1,319 @@ +# -*-coding:utf-8 -* + +# Copyright (c) 2011-2015, Intel Corporation +# All rights reserved. +# +# Redistribution and use in source and binary forms, with or without modification, +# are permitted provided that the following conditions are met: +# +# 1. Redistributions of source code must retain the above copyright notice, this +# list of conditions and the following disclaimer. +# +# 2. Redistributions in binary form must reproduce the above copyright notice, +# this list of conditions and the following disclaimer in the documentation and/or +# other materials provided with the distribution. +# +# 3. Neither the name of the copyright holder nor the names of its contributors +# may be used to endorse or promote products derived from this software without +# specific prior written permission. +# +# THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND +# ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED +# WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE +# DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR +# ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES +# (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; +# LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON +# ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT +# (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS +# SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +""" +Bit block parameter type testcases. + +List of tested functions : +-------------------------- + - [setParameter] function + - [getParameter] function + +Initial Settings : +------------------ + Block size = 8bits : + - BIT_0_3, size = 3, pos=0 + - BIT_3_1, size = 1, pos=3 + - BIT_4_1, size = 1, pos=4 + - BIT_6_2, size = 2, pos=6 + - BIT_7_1, size = 1, pos=7 + +Test cases : +------------ + - Testing nominal TestCase : set bit to bit + - Testing error testcase : set block in one shot + - Testing out of bound TestCase + - Testing conflicting TestCase : two bits at the same position + - Testing out of size TestCase : Bit define on a wrong position +""" + +import commands +import unittest +from Util.PfwUnitTestLib import PfwTestCase +from Util import ACTLogging +log=ACTLogging.Logger() + +# Test of type UINT16 - range [0, 1000] +class TestCases(PfwTestCase): + def setUp(self): + self.block_name = "/Test/Test/TEST_TYPES/BLOCK_8BIT" + self.filesystem_name="$PFW_FILESYSTEM/BLOCK_8BIT" + + self.bit_name=[] + + #BIT_0_3, size = 3, pos = 0 + self.bit_name.append("/Test/Test/TEST_TYPES/BLOCK_8BIT/BIT_0_3") + #BIT_3_1, size = 1, pos = 3 + self.bit_name.append("/Test/Test/TEST_TYPES/BLOCK_8BIT/BIT_3_1") + #BIT_4_1, size = 1, pos = 4 + self.bit_name.append("/Test/Test/TEST_TYPES/BLOCK_8BIT/BIT_4_1") + #BIT_6_2, size = 2, pos = 6 + self.bit_name.append("/Test/Test/TEST_TYPES/BLOCK_8BIT/BIT_6_2") + #BIT_7_1, size = 1, pos = 7 + self.bit_name.append("/Test/Test/TEST_TYPES/BLOCK_8BIT/BIT_7_1") + + self.pfw.sendCmd("setTuningMode", "on") + + def tearDown(self): + self.pfw.sendCmd("setTuningMode", "off") + + + def test_Nominal_Case(self): + """ + Testing Bit block parameter in nominal case + ------------------------------------------- + Test case description : + ~~~~~~~~~~~~~~~~~~~~~~~ + - set Bit parameter in nominal case : + - BLOCK_BIT = 0b01011101, 0x5D, 93 + - BIT_0_3 = 5 + - BIT_3_1 = 1 + - BIT_4_1 = 1 + - BIT_6_1 = 1 + Tested commands : + ~~~~~~~~~~~~~~~~~ + - [setParameter] function + Used commands : + ~~~~~~~~~~~~~~~ + - [getParameter] function + Expected result : + ~~~~~~~~~~~~~~~~~ + - BIT parameters set to nominal value + - FILESYSTEM BLOCK_8BIT set to 0x5D + """ + log.D(self.test_Nominal_Case.__doc__) + + value_bit=["5","1","1","1"] + filesystem_value=["0x5","0xd","0x1d","0x5d"] + + for index_bit in range(4): + log.I("set parameter %s to %s"%(self.bit_name[index_bit],value_bit[index_bit])) + out,err = self.pfw.sendCmd("setParameter",self.bit_name[index_bit],value_bit[index_bit]) + assert err == None, log.E("setParameter %s %s : %s" % (self.bit_name[index_bit],value_bit[index_bit], err)) + assert out == "Done", log.F("setParameter %s %s" %(self.bit_name[index_bit],value_bit[index_bit])) + log.I("Check bit %s value"%(self.bit_name[index_bit])) + out,err = self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + assert err == None, log.E("getParameter %s : %s" % (self.block_name, err)) + assert out == value_bit[index_bit], log.F("getParameter %s - Expected : %s Found : %s" %(self.bit_name[index_bit],value_bit[index_bit], out)) + log.I("Check filesystem value") + assert commands.getoutput("cat %s"%(self.filesystem_name)) == filesystem_value[index_bit], log.F("FILESYSTEM : parameter update error for %s after setting bit %s "%(self.block_name, self.bit_name[index_bit])) + + + def test_Set_Block_Directly_Case(self): + """ + Testing setting Bit block parameter in one shot + ----------------------------------------------- + Test case description : + ~~~~~~~~~~~~~~~~~~~~~~~ + - set Bit block directly without setting bit to bit : + - BLOCK_BIT = 0b01011101, 0x5D, 93 + Tested commands : + ~~~~~~~~~~~~~~~~~ + - [setParameter] function + Used commands : + ~~~~~~~~~~~~~~~ + - [getParameter] function + Expected result : + ~~~~~~~~~~~~~~~~~ + - Unable to set directly a block bit + - FILESYSTEM BLOCK_8BIT must not change + """ + log.D(self.test_Set_Block_Directly_Case.__doc__) + + value = "93" + + log.I("Load the initial value of bit parameter") + init_value_bit=[] + for index_bit in range(4): + out,err=self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + assert err == None, log.E("getParameter %s"%self.bit_name[index_bit]) + init_value_bit.append(out) + + init_filesystem_value=commands.getoutput("cat %s"%(self.filesystem_name)) + + log.I("Try to set parameter %s to %s, failed expected"%(self.block_name,value)) + out,err = self.pfw.sendCmd("setParameter",self.block_name, value) + assert err == None, log.E("setParameter %s %s : %s" % (self.block_name, value, err)) + assert out != "Done", log.F("Error not detected when setting directly the block %s" % (self.block_name)) + log.I("Try to get parameter %s to %s, failed expected"%(self.block_name,value)) + out,err = self.pfw.sendCmd("getParameter",self.block_name, value) + assert err == None, log.E("getParameter %s : %s" % (self.block_name, err)) + assert out != value, log.F("Error not detected when getting directly the block %s" % (self.block_name)) + log.I("Check filesystem value") + assert commands.getoutput("cat %s"%(self.filesystem_name)) == init_filesystem_value, log.F("FILESYSTEM : parameter update error for %s"%(self.block_name)) + + log.I("Check Bit value") + for index_bit in range(4): + out,err=self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + assert out==init_value_bit[index_bit], log.F("BLACKBOARD: Forbidden change value for bit %s - Expected : %s Found : %s"%(self.bit_name[index_bit],init_value_bit[index_bit],out)) + + def test_Out_Of_Bound_Bit_Value_Case(self): + """ + Testing setting bit in out of bound + ----------------------------------- + Test case description : + ~~~~~~~~~~~~~~~~~~~~~~~ + - set bit BIT_3_1 to 2 + - check bit BIT_3_1 value + - check bit BIT_0_3 value + - check bit BIT_4_1 value + - check block bit Filesystem value + Tested commands : + ~~~~~~~~~~~~~~~~~ + - [setParameter] function + Used commands : + ~~~~~~~~~~~~~~~ + - [getParameter] function + Expected result : + ~~~~~~~~~~~~~~~~~ + - Error detected when setting BIT_3_1 to out of bound value + - FILESYSTEM BLOCK_8BIT must not change + """ + log.D(self.test_Out_Of_Bound_Bit_Value_Case.__doc__) + + bit_value="3" + + log.I("Load the initial value of bit parameter") + init_value_bit=[] + for index_bit in range(4): + out,err=self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + assert err == None, log.E("getParameter %s"%self.bit_name[index_bit]) + init_value_bit.append(out) + + init_filesystem_value=commands.getoutput("cat %s"%(self.filesystem_name)) + + log.I("set parameter %s to %s, failed expected"%(self.bit_name[1],bit_value)) + out,err = self.pfw.sendCmd("setParameter",self.bit_name[1],bit_value) + assert err == None, log.E("setParameter %s %s : %s" % (self.bit_name[1],bit_value, err)) + assert out != "Done", log.F("Error not detected when setting the bit %s to out of bound value %s" % (self.bit_name[1],bit_value)) + log.I("Check Bit value") + for index_bit in range(4): + out,err=self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + assert out==init_value_bit[index_bit], log.F("BLACKBOARD: Forbidden change value for bit %s - Expected : %s Found : %s"%(self.bit_name[index_bit],init_value_bit[index_bit],out)) + log.I("Check filesystem value") + assert commands.getoutput("cat %s"%(self.filesystem_name)) == init_filesystem_value, log.F("FILESYSTEM : parameter update error for %s"%(self.block_name)) + + def test_Undefined_Bit_Case(self): + """ + Testing setting an undefined bit + -------------------------------- + Test case description : + ~~~~~~~~~~~~~~~~~~~~~~~ + - set bit BIT_UNDEF to 1 + - check block bit Filesystem value + Tested commands : + ~~~~~~~~~~~~~~~~~ + - [setParameter] function + Used commands : + ~~~~~~~~~~~~~~~ + - [getParameter] function + Expected result : + ~~~~~~~~~~~~~~~~~ + - Error detected when setting BIT_UNDEF + - FILESYSTEM BLOCK_8BIT must not change + """ + log.D(self.test_Undefined_Bit_Case.__doc__) + + bit_value="1" + bit_undefined_name="/Test/Test/TEST_TYPES/BLOCK_8BIT/BIT_UNDEF" + + log.I("Load the initial value of bit parameter") + init_value_bit=[] + for index_bit in range(4): + out,err=self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + assert err == None, log.E("getParameter %s"%self.bit_name[index_bit]) + init_value_bit.append(out) + + init_filesystem_value=commands.getoutput("cat %s"%(self.filesystem_name)) + + log.I("set parameter %s to %s, failed expected"%(bit_undefined_name,bit_value)) + out,err = self.pfw.sendCmd("setParameter",bit_undefined_name,bit_value) + assert err == None, log.E("setParameter %s %s : %s" % (bit_undefined_name,bit_value, err)) + assert out != "Done", log.F("Error not detected when setting the bit %s to out of bound value %s" % (bit_undefined_name,bit_value)) + log.I("Check Bit value") + for index_bit in range(4): + out,err=self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + assert out==init_value_bit[index_bit], log.F("BLACKBOARD: Forbidden change value for bit %s - Expected : %s Found : %s"%(self.bit_name[index_bit],init_value_bit[index_bit],out)) + log.I("Check filesystem value") + assert commands.getoutput("cat %s"%(self.filesystem_name)) == init_filesystem_value, log.F("FILESYSTEM : parameter update error for %s"%(self.block_name)) + + @unittest.expectedFailure + def test_Position_Conflicting_Case(self): + """ + Testing conflicting position + ---------------------------- + Parameter : + ~~~~~~~~~~~ + BIT_6_2 : Position = 6, size = 2 conflicting with + BIT_7_1 : Position = 7; size = 1 + Test case description : + ~~~~~~~~~~~~~~~~~~~~~~~ + - set bit BIT_6_2 to 0 + - set bit BIT_7_1 to 1 + - check bit BIT_6_2 value + - check block bit Filesystem value + Tested commands : + ~~~~~~~~~~~~~~~~~ + - [setParameter] function + Used commands : + ~~~~~~~~~~~~~~~ + - [getParameter] function + Expected result : + ~~~~~~~~~~~~~~~~~ + - Unable to define 2 bits at the same position + """ + log.D(self.test_Position_Conflicting_Case.__doc__) + + bit_value_6_2="0" + bit_value_7_1="1" + + log.I("set parameter %s to %s"%(self.bit_name[3],bit_value_6_2)) + out,err = self.pfw.sendCmd("setParameter",self.bit_name[3],bit_value_6_2) + assert err == None, log.E("setParameter %s %s : %s" % (self.bit_name[3],bit_value_6_2, err)) + assert out == "Done", log.F("setParameter %s %s" %(self.bit_name[3],bit_value_6_2)) + + log.I("Load the value of bit parameter") + init_value_bit=[] + for index_bit in range(4): + out,err=self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + init_value_bit.append(out) + + init_filesystem_value=commands.getoutput("cat %s"%(self.filesystem_name)) + + log.I("set parameter %s to %s, failed expected"%(self.bit_name[4],bit_value_7_1)) + out,err = self.pfw.sendCmd("setParameter",self.bit_name[4],bit_value_7_1) + assert err == None, log.E("setParameter %s %s : %s" % (self.bit_name[4],bit_value_7_1, err)) + assert out != "Done", log.F("Error not detected when setting the conflicting bit %s" % (self.bit_name[4])) + log.I("Check Bit value") + for index_bit in range(4): + out,err=self.pfw.sendCmd("getParameter",self.bit_name[index_bit]) + assert out==init_value_bit[index_bit], log.F("BLACKBOARD: Forbidden change value for bit %s - Expected : %s Found : %s"%(self.bit_name[index_bit],init_value_bit[index_bit],out)) + log.I("Check filesystem value") + assert commands.getoutput("cat %s"%(self.filesystem_name)) == init_filesystem_value, log.F("FILESYSTEM : parameter update error for %s"%(self.block_name)) |