/* * Copyright (c) 2011-2014, Intel Corporation * All rights reserved. * * Redistribution and use in source and binary forms, with or without modification, * are permitted provided that the following conditions are met: * * 1. Redistributions of source code must retain the above copyright notice, this * list of conditions and the following disclaimer. * * 2. Redistributions in binary form must reproduce the above copyright notice, * this list of conditions and the following disclaimer in the documentation and/or * other materials provided with the distribution. * * 3. Neither the name of the copyright holder nor the names of its contributors * may be used to endorse or promote products derived from this software without * specific prior written permission. * * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND * ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED * WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE FOR * ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS * SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. */ #include "ParameterMgr.h" #include "XmlParameterSerializingContext.h" #include "XmlElementSerializingContext.h" #include "SystemClass.h" #include "ElementLibrarySet.h" #include "SubsystemLibrary.h" #include "NamedElementBuilderTemplate.h" #include "KindElementBuilderTemplate.h" #include "ElementBuilderTemplate.h" #include "XmlFileIncluderElement.h" #include "SelectionCriterionType.h" #include "SubsystemElementBuilder.h" #include "FileIncluderElementBuilder.h" #include "SelectionCriteria.h" #include "ComponentType.h" #include "ComponentInstance.h" #include "ParameterBlockType.h" #include "BooleanParameterType.h" #include "IntegerParameterType.h" #include "FixedPointParameterType.h" #include "ParameterBlackboard.h" #include "Parameter.h" #include "ParameterAccessContext.h" #include "XmlFileIncluderElement.h" #include "ParameterFrameworkConfiguration.h" #include "FrameworkConfigurationGroup.h" #include "PluginLocation.h" #include "SubsystemPlugins.h" #include "FrameworkConfigurationLocation.h" #include "ConfigurableDomains.h" #include "ConfigurableDomain.h" #include "DomainConfiguration.h" #include "XmlDomainSerializingContext.h" #include "BitParameterBlockType.h" #include "BitParameterType.h" #include "StringParameterType.h" #include "EnumParameterType.h" #include "RemoteProcessorServerInterface.h" #include "ElementLocator.h" #include "AutoLog.h" #include "CompoundRule.h" #include "SelectionCriterionRule.h" #include "SimulatedBackSynchronizer.h" #include "HardwareBackSynchronizer.h" #include "AutoLock.h" #include #include #include #include "ParameterHandle.h" #include "LinearParameterAdaptation.h" #include "EnumValuePair.h" #include "Subsystem.h" #include "XmlFileDocSink.h" #include "XmlFileDocSource.h" #include "XmlStringDocSink.h" #include "XmlStringDocSource.h" #include "XmlMemoryDocSink.h" #include "XmlMemoryDocSource.h" #include "Utility.h" #include #define base CElement using std::string; using std::list; using std::vector; using std::ostringstream; // Used for remote processor server creation typedef IRemoteProcessorServerInterface* (*CreateRemoteProcessorServer)(uint16_t uiPort, IRemoteCommandHandler* pCommandHandler); // Global configuration file name (fixed) const char* gacParameterFrameworkConfigurationFileName = "ParameterFrameworkConfiguration.xml"; const char* gacSystemSchemasSubFolder = "Schemas"; // Config File System looks normally like this: // --------------------------------------------- //|-- .xml //|-- Schemas //| `-- *.xsd //|-- Settings //| `-- * //| |-- .xml //| `-- .bin? //`-- Structure // `-- * // |-- Class.xml // `-- .xml* // -------------------------------------------- // Remote command parser array const CParameterMgr::SRemoteCommandParserItem CParameterMgr::gastRemoteCommandParserItems[] = { /// Version { "version", &CParameterMgr::versionCommandProcess, 0, "", "Show version" }, /// Status { "status", &CParameterMgr::statusCommandProcess, 0, "", "Show current status" }, /// Tuning Mode { "setTuningMode", &CParameterMgr::setTuningModeCommmandProcess, 1, "on|off*", "Turn on or off Tuning Mode" }, { "getTuningMode", &CParameterMgr::getTuningModeCommmandProcess, 0, "", "Show Tuning Mode" }, /// Value Space { "setValueSpace", &CParameterMgr::setValueSpaceCommmandProcess, 1, "raw|real*", "Assigns Value Space used for parameter value interpretation" }, { "getValueSpace", &CParameterMgr::getValueSpaceCommmandProcess, 0, "", "Show Value Space" }, /// Output Raw Format { "setOutputRawFormat", &CParameterMgr::setOutputRawFormatCommmandProcess, 1, "dec*|hex", "Assigns format used to output parameter values when in raw Value Space" }, { "getOutputRawFormat", &CParameterMgr::getOutputRawFormatCommmandProcess, 0, "", "Show Output Raw Format" }, /// Sync { "setAutoSync", &CParameterMgr::setAutoSyncCommmandProcess, 1, "on*|off", "Turn on or off automatic synchronization to hardware while in Tuning Mode" }, { "getAutoSync", &CParameterMgr::getAutoSyncCommmandProcess, 0, "", "Show Auto Sync state" }, { "sync", &CParameterMgr::syncCommmandProcess, 0, "", "Synchronize current settings to hardware while in Tuning Mode and Auto Sync off" }, /// Criteria { "listCriteria", &CParameterMgr::listCriteriaCommmandProcess, 0, "[csv]", "List selection criteria" }, /// Domains { "listDomains", &CParameterMgr::listDomainsCommmandProcess, 0, "", "List configurable domains" }, { "dumpDomains", &CParameterMgr::dumpDomainsCommmandProcess, 0, "", "Show all domains and configurations, including applicability conditions" }, { "createDomain", &CParameterMgr::createDomainCommmandProcess, 1, "", "Create new configurable domain" }, { "deleteDomain", &CParameterMgr::deleteDomainCommmandProcess, 1, "", "Delete configurable domain" }, { "deleteAllDomains", &CParameterMgr::deleteAllDomainsCommmandProcess, 0, "", "Delete all configurable domains" }, { "renameDomain", &CParameterMgr::renameDomainCommmandProcess, 2, " ", "Rename configurable domain" }, { "setSequenceAwareness", &CParameterMgr::setSequenceAwarenessCommmandProcess, 1, " true|false*", "Set configurable domain sequence awareness" }, { "getSequenceAwareness", &CParameterMgr::getSequenceAwarenessCommmandProcess, 1, "", "Get configurable domain sequence awareness" }, { "listDomainElements", &CParameterMgr::listDomainElementsCommmandProcess, 1, "", "List elements associated to configurable domain" }, { "addElement", &CParameterMgr::addElementCommmandProcess, 2, " ", "Associate element at given path to configurable domain" }, { "removeElement", &CParameterMgr::removeElementCommmandProcess, 2, " ", "Dissociate element at given path from configurable domain" }, { "splitDomain", &CParameterMgr::splitDomainCommmandProcess, 2, " ", "Split configurable domain at given associated element path" }, /// Configurations { "listConfigurations", &CParameterMgr::listConfigurationsCommmandProcess, 1, "", "List domain configurations" }, { "createConfiguration", &CParameterMgr::createConfigurationCommmandProcess, 2, " ", "Create new domain configuration" }, { "deleteConfiguration", &CParameterMgr::deleteConfigurationCommmandProcess, 2, " ", "Delete domain configuration" }, { "renameConfiguration", &CParameterMgr::renameConfigurationCommmandProcess, 3, " ", "Rename domain configuration" }, { "saveConfiguration", &CParameterMgr::saveConfigurationCommmandProcess, 2, " ", "Save current settings into configuration" }, { "restoreConfiguration", &CParameterMgr::restoreConfigurationCommmandProcess, 2, " ", "Restore current settings from configuration" }, { "setElementSequence", &CParameterMgr::setElementSequenceCommmandProcess, 3, " ", "Set element application order for configuration" }, { "getElementSequence", &CParameterMgr::getElementSequenceCommmandProcess, 2, " ", "Get element application order for configuration" }, { "setRule", &CParameterMgr::setRuleCommmandProcess, 3, " ", "Set configuration application rule" }, { "clearRule", &CParameterMgr::clearRuleCommmandProcess, 2, " ", "Clear configuration application rule" }, { "getRule", &CParameterMgr::getRuleCommmandProcess, 2, " ", "Get configuration application rule" }, /// Elements/Parameters { "listElements", &CParameterMgr::listElementsCommmandProcess, 1, "|/", "List elements under element at given path or root" }, { "listParameters", &CParameterMgr::listParametersCommmandProcess, 1, "|/", "List parameters under element at given path or root" }, { "dumpElement", &CParameterMgr::dumpElementCommmandProcess, 1, "", "Dump structure and content of element at given path" }, { "getElementSize", &CParameterMgr::getElementSizeCommmandProcess, 1, "", "Show size of element at given path" }, { "showProperties", &CParameterMgr::showPropertiesCommmandProcess, 1, "", "Show properties of element at given path" }, { "getParameter", &CParameterMgr::getParameterCommmandProcess, 1, "", "Get value for parameter at given path" }, { "setParameter", &CParameterMgr::setParameterCommmandProcess, 2, " ", "Set value for parameter at given path" }, { "listBelongingDomains", &CParameterMgr::listBelongingDomainsCommmandProcess, 1, "", "List domain(s) element at given path belongs to" }, { "listAssociatedDomains", &CParameterMgr::listAssociatedDomainsCommmandProcess, 1, "", "List domain(s) element at given path is associated to" }, { "getConfigurationParameter", &CParameterMgr::getConfigurationParameterCommmandProcess, 3, " ", "Get value for parameter at given path from configuration" }, { "setConfigurationParameter", &CParameterMgr::setConfigurationParameterCommmandProcess, 4, " ", "Set value for parameter at given path to configuration" }, { "showMapping", &CParameterMgr::showMappingCommmandProcess, 1, "", "Show mapping for an element at given path" }, /// Browse { "listAssociatedElements", &CParameterMgr::listAssociatedElementsCommmandProcess, 0, "", "List element sub-trees associated to at least one configurable domain" }, { "listConflictingElements", &CParameterMgr::listConflictingElementsCommmandProcess, 0, "", "List element sub-trees contained in more than one configurable domain" }, { "listRogueElements", &CParameterMgr::listRogueElementsCommmandProcess, 0, "", "List element sub-trees owned by no configurable domain" }, /// Settings Import/Export { "exportDomainsXML", &CParameterMgr::exportConfigurableDomainsToXMLCommmandProcess, 1, " ", "Export domains to XML file" }, { "importDomainsXML", &CParameterMgr::importConfigurableDomainsFromXMLCommmandProcess, 1, "", "Import domains from XML file" }, { "exportDomainsWithSettingsXML", &CParameterMgr::exportConfigurableDomainsWithSettingsToXMLCommmandProcess, 1, " ", "Export domains including settings to XML file" }, { "importDomainsWithSettingsXML", &CParameterMgr::importConfigurableDomainsWithSettingsFromXMLCommmandProcess, 1, "", "Import domains including settings from XML file" }, { "exportSettings", &CParameterMgr::exportSettingsCommmandProcess, 1, "", "Export settings to binary file" }, { "importSettings", &CParameterMgr::importSettingsCommmandProcess, 1, "", "Import settings from binary file" }, { "getDomainsWithSettingsXML", &CParameterMgr::getConfigurableDomainsWithSettingsXMLCommmandProcess, 0, "", "Print domains including settings as XML" }, { "setDomainsWithSettingsXML", &CParameterMgr::setConfigurableDomainsWithSettingsXMLCommmandProcess, 1, "", "Import domains including settings from XML string" }, /// Structure Export { "getSystemClassXML", &CParameterMgr::getSystemClassXMLCommmandProcess, 0 , "", "Print parameter structure as XML" }, /// Deprecated Commands { "getDomainsXML", &CParameterMgr::getConfigurableDomainsWithSettingsXMLCommmandProcess, 0, "", "DEPRECATED COMMAND, please use getDomainsWithSettingsXML" }, }; // Remote command parsers array Size const uint32_t CParameterMgr::guiNbRemoteCommandParserItems = sizeof(gastRemoteCommandParserItems) / sizeof(gastRemoteCommandParserItems[0]); CParameterMgr::CParameterMgr(const string& strConfigurationFilePath) : _bTuningModeIsOn(false), _bValueSpaceIsRaw(false), _bOutputRawFormatIsHex(false), _bAutoSyncOn(true), _pMainParameterBlackboard(new CParameterBlackboard), _pElementLibrarySet(new CElementLibrarySet), _strXmlConfigurationFilePath(strConfigurationFilePath), _pSubsystemPlugins(NULL), _handleLibRemoteProcessor(NULL), _uiStructureChecksum(0), _pRemoteProcessorServer(NULL), _uiMaxCommandUsageLength(0), _pLogger(NULL), _uiLogDepth(0), _bFailOnMissingSubsystem(true), _bFailOnFailedSettingsLoad(true), _bValidateSchemasOnStart(false) { // Tuning Mode Mutex bzero(&_blackboardMutex, sizeof(_blackboardMutex)); pthread_mutex_init(&_blackboardMutex, NULL); // Deal with children addChild(new CParameterFrameworkConfiguration); addChild(new CSelectionCriteria); addChild(new CSystemClass); addChild(new CConfigurableDomains); _pCommandHandler = new CCommandHandler(this); // Add command parsers uint32_t uiRemoteCommandParserItem; for (uiRemoteCommandParserItem = 0; uiRemoteCommandParserItem < guiNbRemoteCommandParserItems; uiRemoteCommandParserItem++) { const SRemoteCommandParserItem* pRemoteCommandParserItem = &gastRemoteCommandParserItems[uiRemoteCommandParserItem]; _pCommandHandler->addCommandParser(pRemoteCommandParserItem->_pcCommandName, pRemoteCommandParserItem->_pfnParser, pRemoteCommandParserItem->_uiMinArgumentCount, pRemoteCommandParserItem->_pcHelp, pRemoteCommandParserItem->_pcDescription); } // Configuration file folder uint32_t uiSlashPos = _strXmlConfigurationFilePath.rfind('/', -1); assert(uiSlashPos != (uint32_t)-1); _strXmlConfigurationFolderPath = _strXmlConfigurationFilePath.substr(0, uiSlashPos); // Schema absolute folder location _strSchemaFolderLocation = _strXmlConfigurationFolderPath + "/" + gacSystemSchemasSubFolder; } CParameterMgr::~CParameterMgr() { // Children delete _pRemoteProcessorServer; delete _pCommandHandler; delete _pMainParameterBlackboard; delete _pElementLibrarySet; // Close remote processor library if (_handleLibRemoteProcessor != NULL) { dlclose(_handleLibRemoteProcessor); } // Tuning Mode Mutex pthread_mutex_destroy(&_blackboardMutex); } string CParameterMgr::getKind() const { return "ParameterMgr"; } // Logging void CParameterMgr::setLogger(CParameterMgr::ILogger* pLogger) { _pLogger = pLogger; } // Logging void CParameterMgr::doLog(bool bIsWarning, const string& strLog) const { if (_pLogger) { // Nest string strIndent; // Level uint32_t uiNbIndents = _uiLogDepth; while (uiNbIndents--) { strIndent += " "; } // Log _pLogger->log(bIsWarning, strIndent + strLog); } } void CParameterMgr::nestLog() const { _uiLogDepth++; } void CParameterMgr::unnestLog() const { _uiLogDepth--; } // Version string CParameterMgr::getVersion() const { string strVersion; // Major strVersion = toString(guiEditionMajor) + "."; // Minor strVersion += toString(guiEditionMinor) + "."; // Revision strVersion += toString(guiRevision); return strVersion; } bool CParameterMgr::load(string& strError) { CAutoLog autoLog(this, "Loading"); feedElementLibraries(); // Load Framework configuration if (!loadFrameworkConfiguration(strError)) { return false; } // Load subsystems if (!getSystemClass()->loadSubsystems(strError, _pSubsystemPlugins, !_bFailOnMissingSubsystem)) { return false; } // Load structure if (!loadStructure(strError)) { return false; } // Load settings if (!loadSettings(strError)) { return false; } // Back synchronization for areas in parameter blackboard not covered by any domain CBackSynchronizer* pBackSynchronizer = createBackSynchronizer(); // Back-synchronize { CAutoLog autoLog(this, "Main blackboard back synchronization"); pBackSynchronizer->sync(); // Get rid of back synchronizer delete pBackSynchronizer; } // We're done loading the settings and back synchronizing CConfigurableDomains* pConfigurableDomains = getConfigurableDomains(); // We need to ensure all domains are valid pConfigurableDomains->validate(_pMainParameterBlackboard); // Log selection criterion states { CAutoLog autoLog(this, "Criterion states"); const CSelectionCriteria* selectionCriteria = getConstSelectionCriteria(); list lstrSelectionCriteron; selectionCriteria->listSelectionCriteria(lstrSelectionCriteron, true, false); log_table(false, lstrSelectionCriteron); } // Subsystem can not ask for resync as they have not been synced yet getSystemClass()->cleanSubsystemsNeedToResync(); // At initialization, check subsystems that need resync doApplyConfigurations(true); // Start remote processor server if appropriate return handleRemoteProcessingInterface(strError); } bool CParameterMgr::loadFrameworkConfiguration(string& strError) { CAutoLog autoLog(this, "Loading framework configuration"); // Parse Structure XML file CXmlElementSerializingContext elementSerializingContext(strError); if (!xmlParse(elementSerializingContext, getFrameworkConfiguration(), _strXmlConfigurationFilePath, _strXmlConfigurationFolderPath, EFrameworkConfigurationLibrary)) { return false; } // Set class name to system class and configurable domains getSystemClass()->setName(getConstFrameworkConfiguration()->getSystemClassName()); getConfigurableDomains()->setName(getConstFrameworkConfiguration()->getSystemClassName()); // Get subsystem plugins elements _pSubsystemPlugins = static_cast(getConstFrameworkConfiguration()->findChild("SubsystemPlugins")); if (!_pSubsystemPlugins) { strError = "Parameter Framework Configuration: couldn't find SubsystemPlugins element"; return false; } // Log tuning availability log_info("Tuning %s", getConstFrameworkConfiguration()->isTuningAllowed() ? "allowed" : "prohibited"); return true; } bool CParameterMgr::loadStructure(string& strError) { // Retrieve system to load structure to CSystemClass* pSystemClass = getSystemClass(); log_info("Loading " + pSystemClass->getName() + " system class structure"); // Get structure description element const CFrameworkConfigurationLocation* pStructureDescriptionFileLocation = static_cast(getConstFrameworkConfiguration()->findChildOfKind("StructureDescriptionFileLocation")); if (!pStructureDescriptionFileLocation) { strError = "No StructureDescriptionFileLocation element found for SystemClass " + pSystemClass->getName(); return false; } // Get Xml structure folder string strXmlStructureFolder = pStructureDescriptionFileLocation->getFolderPath(_strXmlConfigurationFolderPath); // Get Xml structure file name string strXmlStructureFilePath = pStructureDescriptionFileLocation->getFilePath(_strXmlConfigurationFolderPath); // Parse Structure XML file CXmlParameterSerializingContext parameterBuildContext(strError); CAutoLog autolog(pSystemClass, "Importing system structure from file " + strXmlStructureFilePath); if (!xmlParse(parameterBuildContext, pSystemClass, strXmlStructureFilePath, strXmlStructureFolder, EParameterCreationLibrary)) { return false; } // Initialize offsets pSystemClass->setOffset(0); // Initialize main blackboard's size _pMainParameterBlackboard->setSize(pSystemClass->getFootPrint()); return true; } bool CParameterMgr::loadSettings(string& strError) { string strLoadError; bool success = loadSettingsFromConfigFile(strLoadError); if (!success && !_bFailOnFailedSettingsLoad) { // Load can not fail, ie continue but log the load errors log_info(strLoadError); log_info("Failed to load settings, continue without domains."); success = true; } if (!success) { // Propagate the litteral error only if the function fails strError = strLoadError; return false; } return true; } bool CParameterMgr::loadSettingsFromConfigFile(string& strError) { CAutoLog autoLog(this, "Loading settings"); // Get settings configuration element const CFrameworkConfigurationGroup* pParameterConfigurationGroup = static_cast(getConstFrameworkConfiguration()->findChildOfKind("SettingsConfiguration")); if (!pParameterConfigurationGroup) { // No settings to load return true; } // Get binary settings file location const CFrameworkConfigurationLocation* pBinarySettingsFileLocation = static_cast(pParameterConfigurationGroup->findChildOfKind("BinarySettingsFileLocation")); string strXmlBinarySettingsFilePath; if (pBinarySettingsFileLocation) { // Get Xml binary settings file name strXmlBinarySettingsFilePath = pBinarySettingsFileLocation->getFilePath(_strXmlConfigurationFolderPath); } // Get configurable domains element const CFrameworkConfigurationLocation* pConfigurableDomainsFileLocation = static_cast(pParameterConfigurationGroup->findChildOfKind("ConfigurableDomainsFileLocation")); if (!pConfigurableDomainsFileLocation) { strError = "No ConfigurableDomainsFileLocation element found for SystemClass " + getSystemClass()->getName(); return false; } // Get destination root element CConfigurableDomains* pConfigurableDomains = getConfigurableDomains(); // Get Xml configuration domains file name string strXmlConfigurationDomainsFilePath = pConfigurableDomainsFileLocation->getFilePath(_strXmlConfigurationFolderPath); // Get Xml configuration domains folder string strXmlConfigurationDomainsFolder = pConfigurableDomainsFileLocation->getFolderPath(_strXmlConfigurationFolderPath); // Parse configuration domains XML file (ask to read settings from XML file if they are not provided as binary) CXmlDomainSerializingContext xmlDomainSerializingContext(strError, !pBinarySettingsFileLocation); // Selection criteria definition for rule creation xmlDomainSerializingContext.setSelectionCriteriaDefinition(getConstSelectionCriteria()->getSelectionCriteriaDefinition()); // Auto validation of configurations if no binary settings provided xmlDomainSerializingContext.setAutoValidationRequired(!pBinarySettingsFileLocation); log_info("Importing configurable domains from file %s %s settings", strXmlConfigurationDomainsFilePath.c_str(), pBinarySettingsFileLocation ? "without" : "with"); // Do parse if (!xmlParse(xmlDomainSerializingContext, pConfigurableDomains, strXmlConfigurationDomainsFilePath, strXmlConfigurationDomainsFolder, EParameterConfigurationLibrary, "SystemClassName")) { return false; } // We have loaded the whole system structure, compute checksum const CSystemClass* pSystemClass = getConstSystemClass(); _uiStructureChecksum = pSystemClass->computeStructureChecksum() + getConfigurableDomains()->computeStructureChecksum() + getSelectionCriteria()->computeStructureChecksum(); // Load binary settings if any provided if (pBinarySettingsFileLocation && !pConfigurableDomains->serializeSettings(strXmlBinarySettingsFilePath, false, _uiStructureChecksum, strError)) { return false; } return true; } // XML parsing bool CParameterMgr::xmlParse(CXmlElementSerializingContext& elementSerializingContext, CElement* pRootElement, const string& strXmlFilePath, const string& strXmlFolder, CParameterMgr::ElementLibrary eElementLibrary, const string& strNameAttrituteName) { // Init serializing context elementSerializingContext.set(_pElementLibrarySet->getElementLibrary( eElementLibrary), strXmlFolder, _strSchemaFolderLocation); // Get Schema file associated to root element string strXmlSchemaFilePath = _strSchemaFolderLocation + "/" + pRootElement->getKind() + ".xsd"; CXmlFileDocSource fileDocSource(strXmlFilePath, strXmlSchemaFilePath, pRootElement->getKind(), pRootElement->getName(), strNameAttrituteName, _bValidateSchemasOnStart); // Start clean pRootElement->clean(); CXmlMemoryDocSink memorySink(pRootElement); if (!memorySink.process(fileDocSource, elementSerializingContext)) { //Cleanup pRootElement->clean(); return false; } return true; } // Init bool CParameterMgr::init(string& strError) { return base::init(strError); } // Selection criteria interface CSelectionCriterionType* CParameterMgr::createSelectionCriterionType(bool bIsInclusive) { // Propagate return getSelectionCriteria()->createSelectionCriterionType(bIsInclusive); } CSelectionCriterion* CParameterMgr::createSelectionCriterion(const string& strName, const CSelectionCriterionType* pSelectionCriterionType) { // Propagate return getSelectionCriteria()->createSelectionCriterion(strName, pSelectionCriterionType); } // Selection criterion retrieval CSelectionCriterion* CParameterMgr::getSelectionCriterion(const string& strName) { // Propagate return getSelectionCriteria()->getSelectionCriterion(strName); } // Configuration application void CParameterMgr::applyConfigurations() { CAutoLog autoLog(this, "Configuration application request"); // Lock state CAutoLock autoLock(&_blackboardMutex); if (!_bTuningModeIsOn) { // Apply configuration(s) doApplyConfigurations(false); } else { log_warning("Configurations were not applied because the TuningMode is on"); } } // Get the configurableElement corresponding to the given path const CConfigurableElement* CParameterMgr::getConfigurableElement(const string& strPath, string& strError) const { CPathNavigator pathNavigator(strPath); // Nagivate through system class if (!pathNavigator.navigateThrough(getConstSystemClass()->getName(), strError)) { return NULL; } // Find element const CElement* pElement = getConstSystemClass()->findDescendant(pathNavigator); if (!pElement) { strError = "Path not found: " + strPath; return NULL; } // Check found element is a parameter const CConfigurableElement* pConfigurableElement = static_cast(pElement); return pConfigurableElement; } // Dynamic parameter handling CParameterHandle* CParameterMgr::createParameterHandle(const string& strPath, string& strError) { const CConfigurableElement* pConfigurableElement = getConfigurableElement(strPath, strError); if (!pConfigurableElement) { // Element not found strError = "Element not found: " + strPath; return NULL; } if (!pConfigurableElement->isParameter()) { // Element is not parameter strError = "Not a parameter: " + strPath; return NULL; } // Convert as parameter and return new handle return new CParameterHandle(static_cast(pConfigurableElement), this); } void CParameterMgr::setFailureOnMissingSubsystem(bool bFail) { _bFailOnMissingSubsystem = bFail; } bool CParameterMgr::getFailureOnMissingSubsystem() const { return _bFailOnMissingSubsystem; } void CParameterMgr::setFailureOnFailedSettingsLoad(bool bFail) { _bFailOnFailedSettingsLoad = bFail; } bool CParameterMgr::getFailureOnFailedSettingsLoad() { return _bFailOnFailedSettingsLoad; } void CParameterMgr::setValidateSchemasOnStart(bool bValidate) { _bValidateSchemasOnStart = bValidate; } bool CParameterMgr::getValidateSchemasOnStart() const { return _bValidateSchemasOnStart; } /////////////////// Remote command parsers /// Version CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::versionCommandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; // Show version strResult = getVersion(); return CCommandHandler::ESucceeded; } /// Status CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::statusCommandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; // System class const CSystemClass* pSystemClass = getSystemClass(); // Show status /// General section appendTitle(strResult, "General:"); // System class strResult += "System Class: "; strResult += pSystemClass->getName(); strResult += "\n"; // Tuning mode strResult += "Tuning Mode: "; strResult += tuningModeOn() ? "on" : "off"; strResult += "\n"; // Value space strResult += "Value Space: "; strResult += valueSpaceIsRaw() ? "raw" : "real"; strResult += "\n"; // Output raw format strResult += "Output Raw Format: "; strResult += outputRawFormatIsHex() ? "hex" : "dec"; strResult += "\n"; // Auto Sync strResult += "Auto Sync: "; strResult += autoSyncOn() ? "on" : "off"; strResult += "\n"; /// Subsystem list appendTitle(strResult, "Subsystems:"); string strSubsystemList; pSystemClass->listChildrenPaths(strSubsystemList); strResult += strSubsystemList; /// Last applied configurations appendTitle(strResult, "Last Applied [Pending] Configurations:"); string strLastAppliedConfigurations; getConfigurableDomains()->listLastAppliedConfigurations(strLastAppliedConfigurations); strResult += strLastAppliedConfigurations; /// Criteria states appendTitle(strResult, "Selection Criteria:"); list lstrSelectionCriteria; getSelectionCriteria()->listSelectionCriteria(lstrSelectionCriteria, false, true); // Concatenate the criterion list as the command result string strCriteriaStates; CUtility::asString(lstrSelectionCriteria, strCriteriaStates); strResult += strCriteriaStates; return CCommandHandler::ESucceeded; } /// Tuning Mode CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setTuningModeCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { if (remoteCommand.getArgument(0) == "on") { if (setTuningMode(true, strResult)) { return CCommandHandler::EDone; } } else if (remoteCommand.getArgument(0) == "off") { if (setTuningMode(false, strResult)) { return CCommandHandler::EDone; } } else { // Show usage return CCommandHandler::EShowUsage; } return CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getTuningModeCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; strResult = tuningModeOn() ? "on" : "off"; return CCommandHandler::ESucceeded; } /// Value Space CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setValueSpaceCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)strResult; if (remoteCommand.getArgument(0) == "raw") { setValueSpace(true); return CCommandHandler::EDone; } else if (remoteCommand.getArgument(0) == "real") { setValueSpace(false); return CCommandHandler::EDone; } else { // Show usage return CCommandHandler::EShowUsage; } return CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getValueSpaceCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; strResult = valueSpaceIsRaw() ? "raw" : "real"; return CCommandHandler::ESucceeded; } /// Output Raw Format CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setOutputRawFormatCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)strResult; if (remoteCommand.getArgument(0) == "hex") { setOutputRawFormat(true); return CCommandHandler::EDone; } else if (remoteCommand.getArgument(0) == "dec") { setOutputRawFormat(false); return CCommandHandler::EDone; } else { // Show usage return CCommandHandler::EShowUsage; } return CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getOutputRawFormatCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; strResult = outputRawFormatIsHex() ? "hex" : "dec"; return CCommandHandler::ESucceeded; } /// Sync CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setAutoSyncCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { if (remoteCommand.getArgument(0) == "on") { if (setAutoSync(true, strResult)) { return CCommandHandler::EDone; } } else if (remoteCommand.getArgument(0) == "off") { if (setAutoSync(false, strResult)) { return CCommandHandler::EDone; } } else { // Show usage return CCommandHandler::EShowUsage; } return CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getAutoSyncCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; strResult = autoSyncOn() ? "on" : "off"; return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::syncCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; return sync(strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } /// Criteria CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listCriteriaCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; bool humanReadable = true; // Look for optional arguments if (remoteCommand.getArgumentCount() >= 1) { // If csv is provided, format the criterion list in Commas Separated Value pairs if (remoteCommand.getArgument(0) == "csv") { humanReadable = false; } else { return CCommandHandler::EShowUsage; } } list lstrResult; getSelectionCriteria()->listSelectionCriteria(lstrResult, true, humanReadable); // Concatenate the criterion list as the command result CUtility::asString(lstrResult, strResult); return CCommandHandler::ESucceeded; } /// Domains CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; getConfigurableDomains()->listDomains(strResult); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::createDomainCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return createDomain(remoteCommand.getArgument(0), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::deleteDomainCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return deleteDomain(remoteCommand.getArgument(0), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::deleteAllDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; return deleteAllDomains(strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::renameDomainCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return getConfigurableDomains()->renameDomain(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setSequenceAwarenessCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Check tuning mode if (!checkTuningModeOn(strResult)) { return CCommandHandler::EFailed; } // Set property bool bSequenceAware; if (remoteCommand.getArgument(1) == "true") { bSequenceAware = true; } else if (remoteCommand.getArgument(1) == "false") { bSequenceAware = false; } else { // Show usage return CCommandHandler::EShowUsage; } return getConfigurableDomains()->setSequenceAwareness(remoteCommand.getArgument(0), bSequenceAware, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getSequenceAwarenessCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Get property bool bSequenceAware; if (!getConfigurableDomains()->getSequenceAwareness(remoteCommand.getArgument(0), bSequenceAware, strResult)) { return CCommandHandler::EFailed; } strResult = bSequenceAware ? "true" : "false"; return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listDomainElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return getConfigurableDomains()->listDomainElements(remoteCommand.getArgument(0), strResult) ? CCommandHandler::ESucceeded : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::addElementCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return addConfigurableElementToDomain(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::removeElementCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return removeConfigurableElementFromDomain(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::splitDomainCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return split(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } /// Configurations CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listConfigurationsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return getConstConfigurableDomains()->listConfigurations(remoteCommand.getArgument(0), strResult) ? CCommandHandler::ESucceeded : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::dumpDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; // Dummy error context string strError; CErrorContext errorContext(strError); // Dump getConstConfigurableDomains()->dumpContent(strResult, errorContext); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::createConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return createConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::deleteConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return deleteConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::renameConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return getConfigurableDomains()->renameConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), remoteCommand.getArgument(2), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::saveConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return saveConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::restoreConfigurationCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { list lstrResult; if (!restoreConfiguration(remoteCommand.getArgument(0), remoteCommand.getArgument(1), lstrResult)) { //Concatenate the error list as the command result CUtility::asString(lstrResult, strResult); return CCommandHandler::EFailed; } return CCommandHandler::EDone; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setElementSequenceCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Check tuning mode if (!checkTuningModeOn(strResult)) { return CCommandHandler::EFailed; } // Build configurable element path list std::vector astrNewElementSequence; uint32_t uiArgument; for (uiArgument = 2; uiArgument < remoteCommand.getArgumentCount(); uiArgument++) { astrNewElementSequence.push_back(remoteCommand.getArgument(uiArgument)); } // Delegate to configurable domains return getConfigurableDomains()->setElementSequence(remoteCommand.getArgument(0), remoteCommand.getArgument(1), astrNewElementSequence, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getElementSequenceCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Delegate to configurable domains return getConfigurableDomains()->getElementSequence(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::ESucceeded : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setRuleCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Delegate to configurable domains return getConfigurableDomains()->setApplicationRule(remoteCommand.getArgument(0), remoteCommand.getArgument(1), remoteCommand.packArguments(2, remoteCommand.getArgumentCount() - 2), getConstSelectionCriteria()->getSelectionCriteriaDefinition(), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::clearRuleCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Delegate to configurable domains return getConfigurableDomains()->clearApplicationRule(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getRuleCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Delegate to configurable domains return getConfigurableDomains()->getApplicationRule(remoteCommand.getArgument(0), remoteCommand.getArgument(1), strResult) ? CCommandHandler::ESucceeded : CCommandHandler::EFailed; } /// Elements/Parameters CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { CElementLocator elementLocator(getSystemClass(), false); CElement* pLocatedElement = NULL; if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) { return CCommandHandler::EFailed; } strResult = string("\n"); if (!pLocatedElement) { // List from root folder // Return system class qualified name pLocatedElement = getSystemClass(); } // Return sub-elements strResult += pLocatedElement->listQualifiedPaths(false); return CCommandHandler::ESucceeded; } /// Elements/Parameters CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listParametersCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { CElementLocator elementLocator(getSystemClass(), false); CElement* pLocatedElement = NULL; if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) { return CCommandHandler::EFailed; } strResult = string("\n"); if (!pLocatedElement) { // List from root folder // Return system class qualified name pLocatedElement = getSystemClass(); } // Return sub-elements strResult += pLocatedElement->listQualifiedPaths(true); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::dumpElementCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) { return CCommandHandler::EFailed; } string strError; CParameterAccessContext parameterAccessContext(strError, _pMainParameterBlackboard, _bValueSpaceIsRaw, _bOutputRawFormatIsHex); // Dump elements pLocatedElement->dumpContent(strResult, parameterAccessContext); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getElementSizeCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) { return CCommandHandler::EFailed; } // Converted to actual sizable element const CConfigurableElement* pConfigurableElement = static_cast(pLocatedElement); // Get size as string strResult = pConfigurableElement->getFootprintAsString(); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::showPropertiesCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) { return CCommandHandler::EFailed; } // Convert element const CConfigurableElement* pConfigurableElement = static_cast(pLocatedElement); // Return element properties pConfigurableElement->showProperties(strResult); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getParameterCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { string strValue; if (!accessParameterValue(remoteCommand.getArgument(0), strValue, false, strResult)) { return CCommandHandler::EFailed; } // Succeeded strResult = strValue; return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setParameterCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Check tuning mode if (!checkTuningModeOn(strResult)) { return CCommandHandler::EFailed; } // Get value to set string strValue = remoteCommand.packArguments(1, remoteCommand.getArgumentCount() - 1); return accessParameterValue(remoteCommand.getArgument(0), strValue, true, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listBelongingDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) { return CCommandHandler::EFailed; } // Convert element const CConfigurableElement* pConfigurableElement = static_cast(pLocatedElement); // Return element belonging domains pConfigurableElement->listBelongingDomains(strResult); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listAssociatedDomainsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(remoteCommand.getArgument(0), &pLocatedElement, strResult)) { return CCommandHandler::EFailed; } // Convert element const CConfigurableElement* pConfigurableElement = static_cast(pLocatedElement); // Return element belonging domains pConfigurableElement->listAssociatedDomains(strResult); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listAssociatedElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; getConfigurableDomains()->listAssociatedElements(strResult); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listConflictingElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; getConfigurableDomains()->listConflictingElements(strResult); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::listRogueElementsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; getSystemClass()->listRogueElements(strResult); return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getConfigurationParameterCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { string strOutputValue; string strError; if (!accessConfigurationValue(remoteCommand.getArgument(0), remoteCommand.getArgument(1), remoteCommand.getArgument(2), strOutputValue, false, strError)) { strResult = strError; return CCommandHandler::EFailed; } // Succeeded strResult = strOutputValue; return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setConfigurationParameterCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { // Get value to set string strValue = remoteCommand.packArguments(3, remoteCommand.getArgumentCount() - 3); bool bSuccess = accessConfigurationValue(remoteCommand.getArgument(0), remoteCommand.getArgument(1), remoteCommand.getArgument(2), strValue, true, strResult); return bSuccess ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::showMappingCommmandProcess( const IRemoteCommand& remoteCommand, string& strResult) { if (!getParameterMapping(remoteCommand.getArgument(0), strResult)) { return CCommandHandler::EFailed; } return CCommandHandler::ESucceeded; } /// Settings Import/Export CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::exportConfigurableDomainsToXMLCommmandProcess( const IRemoteCommand& remoteCommand, string& strResult) { string strFileName = remoteCommand.getArgument(0); return exportDomainsXml(strFileName, false, true, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::importConfigurableDomainsFromXMLCommmandProcess( const IRemoteCommand& remoteCommand, string& strResult) { return importDomainsXml(remoteCommand.getArgument(0), false, true, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::exportConfigurableDomainsWithSettingsToXMLCommmandProcess( const IRemoteCommand& remoteCommand, string& strResult) { string strFileName = remoteCommand.getArgument(0); return exportDomainsXml(strFileName, true, true, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::importConfigurableDomainsWithSettingsFromXMLCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return importDomainsXml(remoteCommand.getArgument(0), true, true, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::exportSettingsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return exportDomainsBinary(remoteCommand.getArgument(0), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::importSettingsCommmandProcess(const IRemoteCommand& remoteCommand, string& strResult) { return importDomainsBinary(remoteCommand.getArgument(0), strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getConfigurableDomainsWithSettingsXMLCommmandProcess( const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; if (!exportDomainsXml(strResult, true, false, strResult)) { return CCommandHandler::EFailed; } // Succeeded return CCommandHandler::ESucceeded; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::setConfigurableDomainsWithSettingsXMLCommmandProcess( const IRemoteCommand& remoteCommand, string& strResult) { return importDomainsXml(remoteCommand.getArgument(0), true, false, strResult) ? CCommandHandler::EDone : CCommandHandler::EFailed; } CParameterMgr::CCommandHandler::CommandStatus CParameterMgr::getSystemClassXMLCommmandProcess( const IRemoteCommand& remoteCommand, string& strResult) { (void)remoteCommand; if (!getSystemClassXMLString(strResult)) { return CCommandHandler::EFailed; } // Succeeded return CCommandHandler::ESucceeded; } // User set/get parameters in main BlackBoard bool CParameterMgr::accessParameterValue(const string& strPath, string& strValue, bool bSet, string& strError) { // Define context CParameterAccessContext parameterAccessContext(strError, _pMainParameterBlackboard, _bValueSpaceIsRaw, _bOutputRawFormatIsHex); // Activate the auto synchronization with the hardware if (bSet) { parameterAccessContext.setAutoSync(_bAutoSyncOn); } return accessValue(parameterAccessContext, strPath, strValue, bSet, strError); } // User get parameter mapping bool CParameterMgr::getParameterMapping(const string& strPath, string& strResult) const { CPathNavigator pathNavigator(strPath); // Nagivate through system class if (!pathNavigator.navigateThrough(getConstSystemClass()->getName(), strResult)) { return false; } // Get the ConfigurableElement corresponding to strPath const CConfigurableElement* pConfigurableElement = getConfigurableElement(strPath, strResult); if (!pConfigurableElement) { return false; } // Find the list of the ancestors of the current ConfigurableElement that have a mapping list configurableElementPath; pConfigurableElement->getListOfElementsWithMapping(configurableElementPath); // Get the Subsystem containing the ConfigurableElement const CSubsystem* pSubsystem = pConfigurableElement->getBelongingSubsystem(); if (!pSubsystem) { strResult = "Unable to find the Subsystem containing the parameter"; return false; } // Fetch the mapping corresponding to the ConfigurableElement strResult = pSubsystem->getMapping(configurableElementPath); return true; } // User set/get parameters in specific Configuration BlackBoard bool CParameterMgr::accessConfigurationValue(const string& strDomain, const string& strConfiguration, const string& strPath, string& strValue, bool bSet, string& strError) { CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(strPath, &pLocatedElement, strError)) { return false; } // Convert element const CConfigurableElement* pConfigurableElement = static_cast(pLocatedElement); // Get the Configuration blackboard and the Base Offset of the configurable element in this blackboard uint32_t uiBaseOffset; bool bIsLastApplied; CParameterBlackboard* pConfigurationBlackboard = getConstConfigurableDomains()->findConfigurationBlackboard(strDomain, strConfiguration, pConfigurableElement, uiBaseOffset, bIsLastApplied, strError); if (!pConfigurationBlackboard) { return false; } log_info("Element %s in Domain %s, offset: %d, base offset: %d", strPath.c_str(), strDomain.c_str(), pConfigurableElement->getOffset(), uiBaseOffset); /// Update the Configuration Blackboard // Define Configuration context using Base Offset and keep Auto Sync off to prevent access to HW CParameterAccessContext parameterAccessContext(strError, pConfigurationBlackboard, _bValueSpaceIsRaw, _bOutputRawFormatIsHex, uiBaseOffset); // Deactivate the auto synchronization with the hardware during the Configuration Blackboard // access (only Main Blackboard shall be synchronized, Configurations Blackboards are copied // into the Main Blackboard each time a configuration is restored but they are not synchronized // directly). if (bSet) { parameterAccessContext.setAutoSync(false); } // Access Value in the Configuration Blackboard if (!accessValue(parameterAccessContext, strPath, strValue, bSet, strError)) { return false; } /// If the Configuration is the last one applied, update the Main Blackboard as well if (bIsLastApplied) { // Define Main context parameterAccessContext.setParameterBlackboard(_pMainParameterBlackboard); // Activate the auto synchronization with the hardware if (bSet) { parameterAccessContext.setAutoSync(_bAutoSyncOn); } // Access Value in the Main Blackboard return accessValue(parameterAccessContext, strPath, strValue, bSet, strError); } return true; } // User set/get parameters bool CParameterMgr::accessValue(CParameterAccessContext& parameterAccessContext, const string& strPath, string& strValue, bool bSet, string& strError) { // Lock state CAutoLock autoLock(&_blackboardMutex); CPathNavigator pathNavigator(strPath); // Nagivate through system class if (!pathNavigator.navigateThrough(getConstSystemClass()->getName(), strError)) { parameterAccessContext.setError(strError); return false; } // Do the get return getConstSystemClass()->accessValue(pathNavigator, strValue, bSet, parameterAccessContext); } // Tuning mode bool CParameterMgr::setTuningMode(bool bOn, string& strError) { // Tuning allowed? if (bOn && !getConstFrameworkConfiguration()->isTuningAllowed()) { strError = "Tuning prohibited"; return false; } // Lock state CAutoLock autoLock(&_blackboardMutex); // Warn domains about exiting tuning mode if (!bOn && _bTuningModeIsOn) { // Ensure application of currently selected configurations // Force-apply configurations doApplyConfigurations(true); // Turn auto sync back on _bAutoSyncOn = true; } // Store _bTuningModeIsOn = bOn; return true; } bool CParameterMgr::tuningModeOn() const { return _bTuningModeIsOn; } // Current value space for user set/get value interpretation void CParameterMgr::setValueSpace(bool bIsRaw) { _bValueSpaceIsRaw = bIsRaw; } bool CParameterMgr::valueSpaceIsRaw() { return _bValueSpaceIsRaw; } // Current Output Raw Format for user get value interpretation void CParameterMgr::setOutputRawFormat(bool bIsHex) { _bOutputRawFormatIsHex = bIsHex; } bool CParameterMgr::outputRawFormatIsHex() { return _bOutputRawFormatIsHex; } /// Sync // Automatic hardware synchronization control (during tuning session) bool CParameterMgr::setAutoSync(bool bAutoSyncOn, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // Warn domains about turning auto sync back on if (bAutoSyncOn && !_bAutoSyncOn) { // Do the synchronization at system class level (could be optimized by keeping track of all modified parameters) if (!sync(strError)) { return false; } } // Set Auto sync _bAutoSyncOn = bAutoSyncOn; return true; } bool CParameterMgr::autoSyncOn() const { return _bAutoSyncOn; } // Manual hardware synchronization control (during tuning session) bool CParameterMgr::sync(string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // Warn domains about turning auto sync back on if (_bAutoSyncOn) { strError = "Feature unavailable when Auto Sync is on"; return false; } // Get syncer set CSyncerSet syncerSet; // ... from system class getConstSystemClass()->fillSyncerSet(syncerSet); // Sync list lstrError; if (! syncerSet.sync(*_pMainParameterBlackboard, false, &lstrError)){ CUtility::asString(lstrError, strError); return false; }; return true; } // Content dump void CParameterMgr::logStructureContent(string& strContent) const { string strError; CParameterAccessContext parameterAccessContext(strError, _pMainParameterBlackboard, _bValueSpaceIsRaw, _bOutputRawFormatIsHex); dumpContent(strContent, parameterAccessContext); } // Configuration/Domains handling bool CParameterMgr::createDomain(const string& strName, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // Delegate to configurable domains return getConfigurableDomains()->createDomain(strName, strError); } bool CParameterMgr::deleteDomain(const string& strName, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // Delegate to configurable domains return getConfigurableDomains()->deleteDomain(strName, strError); } bool CParameterMgr::deleteAllDomains(string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // Delegate to configurable domains getConfigurableDomains()->deleteAllDomains(); return true; } bool CParameterMgr::createConfiguration(const string& strDomain, const string& strConfiguration, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // Delegate to configurable domains return getConfigurableDomains()->createConfiguration(strDomain, strConfiguration, _pMainParameterBlackboard, strError); } bool CParameterMgr::deleteConfiguration(const string& strDomain, const string& strConfiguration, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // Delegate to configurable domains return getConfigurableDomains()->deleteConfiguration(strDomain, strConfiguration, strError); } bool CParameterMgr::restoreConfiguration(const string& strDomain, const string& strConfiguration, list& lstrError) { string strError; // Check tuning mode if (!checkTuningModeOn(strError)) { lstrError.push_back(strError); return false; } // Delegate to configurable domains return getConstConfigurableDomains()->restoreConfiguration(strDomain, strConfiguration, _pMainParameterBlackboard, _bAutoSyncOn, lstrError); } bool CParameterMgr::saveConfiguration(const string& strDomain, const string& strConfiguration, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // Delegate to configurable domains return getConfigurableDomains()->saveConfiguration(strDomain, strConfiguration, _pMainParameterBlackboard, strError); } // Configurable element - domain association bool CParameterMgr::addConfigurableElementToDomain(const string& strDomain, const string& strConfigurableElementPath, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(strConfigurableElementPath, &pLocatedElement, strError)) { return false; } // Convert element CConfigurableElement* pConfigurableElement = static_cast(pLocatedElement); // Delegate return getConfigurableDomains()->addConfigurableElementToDomain(strDomain, pConfigurableElement, _pMainParameterBlackboard, strError); } bool CParameterMgr::removeConfigurableElementFromDomain(const string& strDomain, const string& strConfigurableElementPath, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(strConfigurableElementPath, &pLocatedElement, strError)) { return CCommandHandler::EFailed; } // Convert element CConfigurableElement* pConfigurableElement = static_cast(pLocatedElement); // Delegate return getConfigurableDomains()->removeConfigurableElementFromDomain(strDomain, pConfigurableElement, strError); } bool CParameterMgr::split(const string& strDomain, const string& strConfigurableElementPath, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } CElementLocator elementLocator(getSystemClass()); CElement* pLocatedElement = NULL; if (!elementLocator.locate(strConfigurableElementPath, &pLocatedElement, strError)) { return CCommandHandler::EFailed; } // Convert element CConfigurableElement* pConfigurableElement = static_cast(pLocatedElement); // Delegate return getConfigurableDomains()->split(strDomain, pConfigurableElement, strError); } bool CParameterMgr::importDomainsXml(const string& strXmlSource, bool bWithSettings, bool bFromFile, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // check path is absolute if (bFromFile && strXmlSource[0] != '/') { strError = "Please provide absolute path"; return false; } // Root element CConfigurableDomains* pConfigurableDomains = getConfigurableDomains(); // Context CXmlDomainSerializingContext xmlDomainSerializingContext(strError, bWithSettings); // Selection criteria definition for rule creation xmlDomainSerializingContext.setSelectionCriteriaDefinition( getConstSelectionCriteria()->getSelectionCriteriaDefinition()); // Init serializing context xmlDomainSerializingContext.set( _pElementLibrarySet->getElementLibrary(EParameterConfigurationLibrary), "", _strSchemaFolderLocation); // Get Schema file associated to root element string strXmlSchemaFilePath = _strSchemaFolderLocation + "/" + pConfigurableDomains->getKind() + ".xsd"; // Xml Source CXmlDocSource* pSource; if (bFromFile) { // when importing from a file strXmlSource is the file name pSource = new CXmlFileDocSource(strXmlSource, strXmlSchemaFilePath, pConfigurableDomains->getKind(), pConfigurableDomains->getName(), "SystemClassName", _bValidateSchemasOnStart); } else { // when importing from an xml string, strXmlSource contains the string pSource = new CXmlStringDocSource(strXmlSource, strXmlSchemaFilePath, pConfigurableDomains->getKind(), pConfigurableDomains->getName(), "SystemClassName", _bValidateSchemasOnStart); } // Start clean pConfigurableDomains->clean(); // Use a doc sink that instantiate Configurable Domains from the given doc source CXmlMemoryDocSink memorySink(pConfigurableDomains); bool bProcessSuccess = memorySink.process(*pSource, xmlDomainSerializingContext); if (!bProcessSuccess) { //Cleanup pConfigurableDomains->clean(); } else { // Validate domains after XML import pConfigurableDomains->validate(_pMainParameterBlackboard); } delete pSource; return bProcessSuccess; } bool CParameterMgr::exportDomainsXml(string& strXmlDest, bool bWithSettings, bool bToFile, string& strError) const { // check path is absolute if (bToFile && strXmlDest[0] != '/') { strError = "Please provide absolute path"; return false; } // Root element const CConfigurableDomains* pConfigurableDomains = getConstConfigurableDomains(); // Get Schema file associated to root element string strXmlSchemaFilePath = _strSchemaFolderLocation + "/" + pConfigurableDomains->getKind() + ".xsd"; // Context CXmlDomainSerializingContext xmlDomainSerializingContext(strError, bWithSettings); // Value space xmlDomainSerializingContext.setValueSpaceRaw(_bValueSpaceIsRaw); // Output raw format xmlDomainSerializingContext.setOutputRawFormat(_bOutputRawFormatIsHex); // Use a doc source by loading data from instantiated Configurable Domains CXmlMemoryDocSource memorySource(pConfigurableDomains, pConfigurableDomains->getKind(), strXmlSchemaFilePath, "parameter-framework", getVersion(), _bValidateSchemasOnStart); // Xml Sink CXmlDocSink* pSink; if (bToFile) { // Use a doc sink to write the doc data in a file pSink = new CXmlFileDocSink(strXmlDest); } else { // Use a doc sink to write the doc data in a string pSink = new CXmlStringDocSink(strXmlDest); } bool bProcessSuccess = pSink->process(memorySource, xmlDomainSerializingContext); delete pSink; return bProcessSuccess; } // Binary Import/Export bool CParameterMgr::importDomainsBinary(const string& strFileName, string& strError) { // Check tuning mode if (!checkTuningModeOn(strError)) { return false; } // check path is absolute if (strFileName[0] != '/') { strError = "Please provide absolute path"; return false; } // Root element CConfigurableDomains* pConfigurableDomains = getConfigurableDomains(); // Serialize in return pConfigurableDomains->serializeSettings(strFileName, false, _uiStructureChecksum, strError); } bool CParameterMgr::exportDomainsBinary(const string& strFileName, string& strError) { // check path is absolute if (strFileName[0] != '/') { strError = "Please provide absolute path"; return false; } // Root element CConfigurableDomains* pConfigurableDomains = getConfigurableDomains(); // Serialize out return pConfigurableDomains->serializeSettings(strFileName, true, _uiStructureChecksum, strError); } // For tuning, check we're in tuning mode bool CParameterMgr::checkTuningModeOn(string& strError) const { // Tuning Mode on? if (!_bTuningModeIsOn) { strError = "Tuning Mode must be on"; return false; } return true; } // Tuning mutex dynamic parameter handling pthread_mutex_t* CParameterMgr::getBlackboardMutex() { return &_blackboardMutex; } // Blackboard reference (dynamic parameter handling) CParameterBlackboard* CParameterMgr::getParameterBlackboard() { return _pMainParameterBlackboard; } // Dynamic creation library feeding void CParameterMgr::feedElementLibraries() { // Global Configuration handling CElementLibrary* pFrameworkConfigurationLibrary = new CElementLibrary; pFrameworkConfigurationLibrary->addElementBuilder("ParameterFrameworkConfiguration", new TElementBuilderTemplate()); pFrameworkConfigurationLibrary->addElementBuilder("SubsystemPlugins", new TKindElementBuilderTemplate()); pFrameworkConfigurationLibrary->addElementBuilder("Location", new TKindElementBuilderTemplate()); pFrameworkConfigurationLibrary->addElementBuilder("StructureDescriptionFileLocation", new TKindElementBuilderTemplate()); pFrameworkConfigurationLibrary->addElementBuilder("SettingsConfiguration", new TKindElementBuilderTemplate()); pFrameworkConfigurationLibrary->addElementBuilder("ConfigurableDomainsFileLocation", new TKindElementBuilderTemplate()); pFrameworkConfigurationLibrary->addElementBuilder("BinarySettingsFileLocation", new TKindElementBuilderTemplate()); _pElementLibrarySet->addElementLibrary(pFrameworkConfigurationLibrary); // Parameter creation CElementLibrary* pParameterCreationLibrary = new CElementLibrary; pParameterCreationLibrary->addElementBuilder("Subsystem", new CSubsystemElementBuilder(getSystemClass()->getSubsystemLibrary())); pParameterCreationLibrary->addElementBuilder("ComponentType", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("Component", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("BitParameter", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("BitParameterBlock", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("StringParameter", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("ParameterBlock", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("BooleanParameter", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("IntegerParameter", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("LinearAdaptation", new TElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("EnumParameter", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("ValuePair", new TElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("FixedPointParameter", new TNamedElementBuilderTemplate()); pParameterCreationLibrary->addElementBuilder("SubsystemInclude", new CFileIncluderElementBuilder(_bValidateSchemasOnStart)); _pElementLibrarySet->addElementLibrary(pParameterCreationLibrary); // Parameter Configuration Domains creation CElementLibrary* pParameterConfigurationLibrary = new CElementLibrary; pParameterConfigurationLibrary->addElementBuilder("ConfigurableDomain", new TNamedElementBuilderTemplate()); pParameterConfigurationLibrary->addElementBuilder("Configuration", new TNamedElementBuilderTemplate()); pParameterConfigurationLibrary->addElementBuilder("CompoundRule", new TElementBuilderTemplate()); pParameterConfigurationLibrary->addElementBuilder("SelectionCriterionRule", new TElementBuilderTemplate()); _pElementLibrarySet->addElementLibrary(pParameterConfigurationLibrary); } // Remote Processor Server connection handling bool CParameterMgr::handleRemoteProcessingInterface(string& strError) { CAutoLog autoLog(this, "Handling remote processing interface"); // Start server if tuning allowed if (getConstFrameworkConfiguration()->isTuningAllowed()) { log_info("Loading remote processor library"); // Load library _handleLibRemoteProcessor = dlopen("libremote-processor.so", RTLD_NOW); if (!_handleLibRemoteProcessor) { // Return error const char* pcError = dlerror(); if (pcError) { strError = pcError; } else { strError = "Unable to load libremote-processor.so library"; } return false; } CreateRemoteProcessorServer pfnCreateRemoteProcessorServer = (CreateRemoteProcessorServer)dlsym(_handleLibRemoteProcessor, "createRemoteProcessorServer"); if (!pfnCreateRemoteProcessorServer) { strError = "libremote-process.so does not contain createRemoteProcessorServer symbol."; return false; } // Create server _pRemoteProcessorServer = pfnCreateRemoteProcessorServer(getConstFrameworkConfiguration()->getServerPort(), _pCommandHandler); log_info("Starting remote processor server on port %d", getConstFrameworkConfiguration()->getServerPort()); // Start if (!_pRemoteProcessorServer->start()) { ostringstream oss; oss << "ParameterMgr: Unable to start remote processor server on port " << getConstFrameworkConfiguration()->getServerPort(); strError = oss.str(); return false; } } return true; } // Back synchronization CBackSynchronizer* CParameterMgr::createBackSynchronizer() const { #ifdef SIMULATION // In simulation, back synchronization of the blackboard won't probably work // We need to ensure though the blackboard is initialized with valid data return new CSimulatedBackSynchronizer(getConstSystemClass(), _pMainParameterBlackboard); #else // Real back synchronizer from subsystems return new CHardwareBackSynchronizer(getConstSystemClass(), _pMainParameterBlackboard); #endif } // Children typwise access CParameterFrameworkConfiguration* CParameterMgr::getFrameworkConfiguration() { return static_cast(getChild(EFrameworkConfiguration)); } const CParameterFrameworkConfiguration* CParameterMgr::getConstFrameworkConfiguration() { return getFrameworkConfiguration(); } CSelectionCriteria* CParameterMgr::getSelectionCriteria() { return static_cast(getChild(ESelectionCriteria)); } const CSelectionCriteria* CParameterMgr::getConstSelectionCriteria() { return static_cast(getChild(ESelectionCriteria)); } CSystemClass* CParameterMgr::getSystemClass() { return static_cast(getChild(ESystemClass)); } const CSystemClass* CParameterMgr::getConstSystemClass() const { return static_cast(getChild(ESystemClass)); } // Configurable Domains CConfigurableDomains* CParameterMgr::getConfigurableDomains() { return static_cast(getChild(EConfigurableDomains)); } const CConfigurableDomains* CParameterMgr::getConstConfigurableDomains() { return static_cast(getChild(EConfigurableDomains)); } const CConfigurableDomains* CParameterMgr::getConstConfigurableDomains() const { return static_cast(getChild(EConfigurableDomains)); } // Apply configurations void CParameterMgr::doApplyConfigurations(bool bForce) { CSyncerSet syncerSet; // Check subsystems that need resync getSystemClass()->checkForSubsystemsToResync(syncerSet); // Ensure application of currently selected configurations getConfigurableDomains()->apply(_pMainParameterBlackboard, syncerSet, bForce); // Reset the modified status of the current criteria to indicate that a new configuration has been applied getSelectionCriteria()->resetModifiedStatus(); } bool CParameterMgr::getSystemClassXMLString(string& strResult) { // Root element const CSystemClass* pSystemClass = getSystemClass(); string strError; CXmlSerializingContext xmlSerializingContext(strError); // Use a doc source by loading data from instantiated Configurable Domains CXmlMemoryDocSource memorySource(pSystemClass, pSystemClass->getKind(), _bValidateSchemasOnStart); // Use a doc sink that write the doc data in a string CXmlStringDocSink stringSink(strResult); bool bProcessSuccess = stringSink.process(memorySource, xmlSerializingContext); if (!bProcessSuccess) { strResult = strError; } return bProcessSuccess; }