diff options
Diffstat (limited to 'gtest/README')
| -rw-r--r-- | gtest/README | 561 |
1 files changed, 330 insertions, 231 deletions
diff --git a/gtest/README b/gtest/README index a9172c5..ec61190 100644 --- a/gtest/README +++ b/gtest/README @@ -1,305 +1,396 @@ Google C++ Testing Framework ============================ + http://code.google.com/p/googletest/ Overview -------- -Google's framework for writing C++ tests on a variety of platforms (Linux, Mac -OS X, Windows, Windows CE, Symbian, and etc). Based on the xUnit architecture. -Supports automatic test discovery, a rich set of assertions, user-defined -assertions, death tests, fatal and non-fatal failures, various options for -running the tests, and XML test report generation. - -Please see the project page above for more information as well as mailing lists -for questions, discussions, and development. There is also an IRC channel on -OFTC (irc.oftc.net) #gtest available. Please join us! - -Requirements ------------- + +Google's framework for writing C++ tests on a variety of platforms +(Linux, Mac OS X, Windows, Windows CE, Symbian, etc). Based on the +xUnit architecture. Supports automatic test discovery, a rich set of +assertions, user-defined assertions, death tests, fatal and non-fatal +failures, various options for running the tests, and XML test report +generation. + +Please see the project page above for more information as well as the +mailing list for questions, discussions, and development. There is +also an IRC channel on OFTC (irc.oftc.net) #gtest available. Please +join us! + +Requirements for End Users +-------------------------- + Google Test is designed to have fairly minimal requirements to build -and use with your projects, but there are some. Currently, we support -building Google Test on Linux, Windows, Mac OS X, and Cygwin. We will -also make our best effort to support other platforms (e.g. Solaris and -IBM z/OS). However, since core members of the Google Test project -have no access to them, Google Test may have outstanding issues on -these platforms. If you notice any problems on your platform, please -notify googletestframework@googlegroups.com (patches for fixing them -are even more welcome!). +and use with your projects, but there are some. Currently, we support +Linux, Windows, Mac OS X, and Cygwin. We will also make our best +effort to support other platforms (e.g. Solaris, AIX, and z/OS). +However, since core members of the Google Test project have no access +to these platforms, Google Test may have outstanding issues there. If +you notice any problems on your platform, please notify +googletestframework@googlegroups.com. Patches for fixing them are +even more welcome! ### Linux Requirements ### + These are the base requirements to build and use Google Test from a source package (as described below): - * GNU-compatible Make or "gmake" + * GNU-compatible Make or gmake * POSIX-standard shell * POSIX(-2) Regular Expressions (regex.h) - * A C++98 standards compliant compiler - -Furthermore, if you are building Google Test from a VCS Checkout (also -described below), there are further requirements: - * Automake version 1.9 or newer - * Autoconf version 2.59 or newer - * Libtool / Libtoolize - * Python version 2.4 or newer + * A C++98-standard-compliant compiler ### Windows Requirements ### - * Microsoft Visual Studio 7.1 or newer + + * Microsoft Visual C++ 7.1 or newer ### Cygwin Requirements ### + * Cygwin 1.5.25-14 or newer ### Mac OS X Requirements ### + * Mac OS X 10.4 Tiger or newer * Developer Tools Installed - * Optional: Xcode 2.5 or later for univeral-binary framework; see note below. + +Also, you'll need CMake 2.6.4 or higher if you want to build the +samples using the provided CMake script, regardless of the platform. + +Requirements for Contributors +----------------------------- + +We welcome patches. If you plan to contribute a patch, you need to +build Google Test and its own tests from an SVN checkout (described +below), which has further requirements: + + * Python version 2.3 or newer (for running some of the tests and + re-generating certain source files from templates) + * CMake 2.6.4 or newer Getting the Source ------------------ -There are two primary ways of getting Google Test's source code: you can -download a source release in your preferred archive format, or directly check -out the source from a Version Control System (VCS, we use Google Code's -Subversion hosting). The VCS checkout requires a few extra steps and some extra -software packages on your system, but lets you track development, and make -patches to contribute much more easily, so we highly encourage it. - -### VCS Checkout: ### -The first step is to select whether you want to check out the main line of -development on Google Test, or one of the released branches. The former will be -much more active and have the latest features, but the latter provides much -more stability and predictability. Choose whichever fits your needs best, and -proceed with the following Subversion commands: + +There are two primary ways of getting Google Test's source code: you +can download a stable source release in your preferred archive format, +or directly check out the source from our Subversion (SVN) repositary. +The SVN checkout requires a few extra steps and some extra software +packages on your system, but lets you track the latest development and +make patches much more easily, so we highly encourage it. + +### Source Package ### + +Google Test is released in versioned source packages which can be +downloaded from the download page [1]. Several different archive +formats are provided, but the only difference is the tools used to +manipulate them, and the size of the resulting file. Download +whichever you are most comfortable with. + + [1] http://code.google.com/p/googletest/downloads/list + +Once the package is downloaded, expand it using whichever tools you +prefer for that type. This will result in a new directory with the +name "gtest-X.Y.Z" which contains all of the source code. Here are +some examples on Linux: + + tar -xvzf gtest-X.Y.Z.tar.gz + tar -xvjf gtest-X.Y.Z.tar.bz2 + unzip gtest-X.Y.Z.zip + +### SVN Checkout ### + +To check out the main branch (also known as the "trunk") of Google +Test, run the following Subversion command: svn checkout http://googletest.googlecode.com/svn/trunk/ gtest-svn -or for a release version X.Y.*'s branch: +Setting up the Build +-------------------- - svn checkout http://googletest.googlecode.com/svn/branches/release-X.Y/ \ - gtest-X.Y-svn +To build Google Test and your tests that use it, you need to tell your +build system where to find its headers and source files. The exact +way to do it depends on which build system you use, and is usually +straightforward. -Next you will need to prepare the GNU Autotools build system, if you -are using Linux, Mac OS X, or Cygwin. Enter the target directory of -the checkout command you used ('gtest-svn' or 'gtest-X.Y-svn' above) -and proceed with the following command: +### Generic Build Instructions ### - autoreconf -fvi +Suppose you put Google Test in directory ${GTEST_DIR}. To build it, +create a library build target (or a project as called by Visual Studio +and Xcode) to compile -Once you have completed this step, you are ready to build the library. Note -that you should only need to complete this step once. The subsequent `make' -invocations will automatically re-generate the bits of the build system that -need to be changed. + ${GTEST_DIR}/src/gtest-all.cc -If your system uses older versions of the autotools, the above command will -fail. You may need to explicitly specify a version to use. For instance, if you -have both GNU Automake 1.4 and 1.9 installed and `automake' would invoke the -1.4, use instead: +with - AUTOMAKE=automake-1.9 ACLOCAL=aclocal-1.9 autoreconf -fvi + ${GTEST_DIR}/include and ${GTEST_DIR} -Make sure you're using the same version of automake and aclocal. +in the header search path. Assuming a Linux-like system and gcc, +something like the following will do: -### Source Package: ### -Google Test is also released in source packages which can be downloaded from -its Google Code download page[1]. Several different archive formats are -provided, but the only difference is the tools used to manipulate them, and the -size of the resulting file. Download whichever you are most comfortable with. + g++ -I${GTEST_DIR}/include -I${GTEST_DIR} -c ${GTEST_DIR}/src/gtest-all.cc + ar -rv libgtest.a gtest-all.o - [1] Google Test Downloads: http://code.google.com/p/googletest/downloads/list +Next, you should compile your test source file with +${GTEST_DIR}/include in the header search path, and link it with gtest +and any other necessary libraries: -Once downloaded expand the archive using whichever tools you prefer for that -type. This will always result in a new directory with the name "gtest-X.Y.Z" -which contains all of the source code. Here are some examples in Linux: + g++ -I${GTEST_DIR}/include path/to/your_test.cc libgtest.a -o your_test - tar -xvzf gtest-X.Y.Z.tar.gz - tar -xvjf gtest-X.Y.Z.tar.bz2 - unzip gtest-X.Y.Z.zip +As an example, the make/ directory contains a Makefile that you can +use to build Google Test on systems where GNU make is available +(e.g. Linux, Mac OS X, and Cygwin). It doesn't try to build Google +Test's own tests. Instead, it just builds the Google Test library and +a sample test. You can use it as a starting point for your own build +script. + +If the default settings are correct for your environment, the +following commands should succeed: + + cd ${GTEST_DIR}/make + make + ./sample1_unittest + +If you see errors, try to tweak the contents of make/Makefile to make +them go away. There are instructions in make/Makefile on how to do +it. + +### Using CMake ### + +Google Test comes with a CMake build script (CMakeLists.txt) that can +be used on a wide range of platforms ("C" stands for cross-platofrm.). +If you don't have CMake installed already, you can download it for +free from http://www.cmake.org/. + +CMake works by generating native makefiles or build projects that can +be used in the compiler environment of your choice. The typical +workflow starts with: + + mkdir mybuild # Create a directory to hold the build output. + cd mybuild + cmake ${GTEST_DIR} # Generate native build scripts. + +If you want to build Google Test's samples, you should replace the +last command with + + cmake -Dbuild_gtest_samples=ON ${GTEST_DIR} + +If you are on a *nix system, you should now see a Makefile in the +current directory. Just type 'make' to build gtest. + +If you use Windows and have Vistual Studio installed, a gtest.sln file +and several .vcproj files will be created. You can then build them +using Visual Studio. + +On Mac OS X with Xcode installed, a .xcodeproj file will be generated. + +### Legacy Build Scripts ### + +Before settling on CMake, we have been providing hand-maintained build +projects/scripts for Visual Studio, Xcode, and Autotools. While we +continue to provide them for convenience, they are not actively +maintained any more. We highly recommend that you follow the +instructions in the previous two sections to integrate Google Test +with your existing build system. + +If you still need to use the legacy build scripts, here's how: + +The msvc\ folder contains two solutions with Visual C++ projects. +Open the gtest.sln or gtest-md.sln file using Visual Studio, and you +are ready to build Google Test the same way you build any Visual +Studio project. Files that have names ending with -md use DLL +versions of Microsoft runtime libraries (the /MD or the /MDd compiler +option). Files without that suffix use static versions of the runtime +libraries (the /MT or the /MTd option). Please note that one must use +the same option to compile both gtest and the test code. If you use +Visual Studio 2005 or above, we recommend the -md version as /MD is +the default for new projects in these versions of Visual Studio. + +On Mac OS X, open the gtest.xcodeproj in the xcode/ folder using +Xcode. Build the "gtest" target. The universal binary framework will +end up in your selected build directory (selected in the Xcode +"Preferences..." -> "Building" pane and defaults to xcode/build). +Alternatively, at the command line, enter: + + xcodebuild + +This will build the "Release" configuration of gtest.framework in your +default build location. See the "xcodebuild" man page for more +information about building different configurations and building in +different locations. + +Tweaking Google Test +-------------------- + +Google Test can be used in diverse environments. The default +configuration may not work (or may not work well) out of the box in +some environments. However, you can easily tweak Google Test by +defining control macros on the compiler command line. Generally, +these macros are named like GTEST_XYZ and you define them to either 1 +or 0 to enable or disable a certain feature. + +We list the most frequently used macros below. For a complete list, +see file include/gtest/internal/gtest-port.h. + +### Choosing a TR1 Tuple Library ### -Choosing a TR1 Tuple Library ----------------------------- Some Google Test features require the C++ Technical Report 1 (TR1) -tuple library, which is not yet widely available with all compilers. -The good news is that Google Test implements a subset of TR1 tuple -that's enough for its own need, and will automatically use this when -the compiler doesn't provide TR1 tuple. +tuple library, which is not yet available with all compilers. The +good news is that Google Test implements a subset of TR1 tuple that's +enough for its own need, and will automatically use this when the +compiler doesn't provide TR1 tuple. Usually you don't need to care about which tuple library Google Test uses. However, if your project already uses TR1 tuple, you need to tell Google Test to use the same TR1 tuple library the rest of your -project uses (this requirement is new in Google Test 1.4.0, so you may -need to take care of it when upgrading from an earlier version), or -the two tuple implementations will clash. To do that, add +project uses, or the two tuple implementations will clash. To do +that, add -DGTEST_USE_OWN_TR1_TUPLE=0 -to the compiler flags while compiling Google Test and your tests. +to the compiler flags while compiling Google Test and your tests. If +you want to force Google Test to use its own tuple library, just add + + -DGTEST_USE_OWN_TR1_TUPLE=1 + +to the compiler flags instead. If you don't want Google Test to use tuple at all, add -DGTEST_HAS_TR1_TUPLE=0 -to the compiler flags. All features using tuple will be disabled in -this mode. - -Building the Source -------------------- -### Linux, Mac OS X (without Xcode), and Cygwin ### -There are two primary options for building the source at this point: build it -inside the source code tree, or in a separate directory. We recommend building -in a separate directory as that tends to produce both more consistent results -and be easier to clean up should anything go wrong, but both patterns are -supported. The only hard restriction is that while the build directory can be -a subdirectory of the source directory, the opposite is not possible and will -result in errors. Once you have selected where you wish to build Google Test, -create the directory if necessary, and enter it. The following steps apply for -either approach by simply substituting the shell variable SRCDIR with "." for -building inside the source directory, and the relative path to the source -directory otherwise. - - ${SRCDIR}/configure # Standard GNU configure script, --help for more info - make # Standard makefile following GNU conventions - make check # Builds and runs all tests - all should pass - -Other programs will only be able to use Google Test's functionality if you -install it in a location which they can access, in Linux this is typically -under '/usr/local'. The following command will install all of the Google Test -libraries, public headers, and utilities necessary for other programs and -libraries to leverage it: - - sudo make install # Not necessary, but allows use by other programs - -Should you need to remove Google Test from your system after having installed -it, run the following command, and it will back out its changes. However, note -carefully that you must run this command on the *same* Google Test build that -you ran the install from, or the results are not predictable. If you install -Google Test on your system, and are working from a VCS checkout, make sure you -run this *before* updating your checkout of the source in order to uninstall -the same version which you installed. - - sudo make uninstall # Must be run against the exact same build as "install" - -Your project can build against Google Test simply by leveraging the -'gtest-config' script. This script can be invoked directly out of the 'scripts' -subdirectory of the build tree, and it will be installed in the binary -directory specified during the 'configure'. Here are some examples of its use, -see 'gtest-config --help' for more detailed information. - - gtest-config --min-version=1.0 || echo "Insufficient Google Test version." - - g++ $(gtest-config --cppflags --cxxflags) -o foo.o -c foo.cpp - g++ $(gtest-config --ldflags --libs) -o foo foo.o - - # When using a built but not installed Google Test: - g++ $(../../my_gtest_build/scripts/gtest-config ...) ... - -### Windows ### -The msvc\ folder contains two solutions with Visual C++ projects. Open the -gtest.sln or gtest-md.sln file using Visual Studio, and you are ready to -build Google Test the same way you build any Visual Studio project. Files -that have names ending with -md use DLL versions of Microsoft runtime -libraries (the /MD or the /MDd compiler option). Files without that suffix -use static versions of the runtime libraries (the /MT or the /MTd option). -Please note that one must use the same option to compile both gtest and his -test code. If you use Visual Studio 2005 or above, we recommend the -md -version as /MD is the default for new projects in these versions of Visual -Studio. - -### Mac OS X (universal-binary framework) ### -Open the gtest.xcodeproj in the xcode/ folder using Xcode. Build the "gtest" -target. The universal binary framework will end up in your selected build -directory (selected in the Xcode "Preferences..." -> "Building" pane and -defaults to xcode/build). Alternatively, at the command line, enter: +and all features using tuple will be disabled. - xcodebuild +### Multi-threaded Tests ### -This will build the "Release" configuration of gtest.framework in your -default build location. See the "xcodebuild" man page for more information about -building different configurations and building in different locations. +Google Test is thread-safe where the pthread library is available. +After #include <gtest/gtest.h>, you can check the GTEST_IS_THREADSAFE +macro to see whether this is the case (yes if the macro is #defined to +1, no if it's undefined.). -To test the gtest.framework in Xcode, change the active target to "Check" and -then build. This target builds all of the tests and then runs them. Don't worry -if you see some errors. Xcode reports all test failures (even the intentional -ones) as errors. However, you should see a "Build succeeded" message at the end -of the build log. To run all of the tests from the command line, enter: +If Google Test doesn't correctly detect whether pthread is available +in your environment, you can force it with - xcodebuild -target Check + -DGTEST_HAS_PTHREAD=1 -Installation with xcodebuild requires specifying an installation desitination -directory, known as the DSTROOT. Three items will be installed when using -xcodebuild: +or - $DSTROOT/Library/Frameworks/gtest.framework - $DSTROOT/usr/local/lib/libgtest.a - $DSTROOT/usr/local/lib/libgtest_main.a + -DGTEST_HAS_PTHREAD=0 -You specify the installation directory on the command line with the other -xcodebuild options. Here's how you would install in a user-visible location: +When Google Test uses pthread, you may need to add flags to your +compiler and/or linker to select the pthread library, or you'll get +link errors. If you use the CMake script or the deprecated Autotools +script, this is taken care of for you. If you use your own build +script, you'll need to read your compiler and linker's manual to +figure out what flags to add. - xcodebuild install DSTROOT=~ +### As a Shared Library (DLL) ### -To perform a system-wide inistall, escalate to an administrator and specify -the file system root as the DSTROOT: +Google Test is compact, so most users can build and link it as a +static library for the simplicity. You can choose to use Google Test +as a shared library (known as a DLL on Windows) if you prefer. - sudo xcodebuild install DSTROOT=/ +To compile gtest as a shared library, add -To uninstall gtest.framework via the command line, you need to delete the three -items listed above. Remember to escalate to an administrator if deleting these -from the system-wide location using the commands listed below: + -DGTEST_CREATE_SHARED_LIBRARY=1 - sudo rm -r /Library/Frameworks/gtest.framework - sudo rm /usr/local/lib/libgtest.a - sudo rm /usr/local/lib/libgtest_main.a +to the compiler flags. You'll also need to tell the linker to produce +a shared library instead - consult your linker's manual for how to do +it. -It is also possible to build and execute individual tests within Xcode. Each -test has its own Xcode "Target" and Xcode "Executable". To build any of the -tests, change the active target and the active executable to the test of -interest and then build and run. +To compile your tests that use the gtest shared library, add -Individual tests can be built from the command line using: + -DGTEST_LINKED_AS_SHARED_LIBRARY=1 - xcodebuild -target <test_name> +to the compiler flags. -These tests can be executed from the command line by moving to the build -directory and then (in bash) +### Avoiding Macro Name Clashes ### - export DYLD_FRAMEWORK_PATH=`pwd` - ./<test_name> # (e.g. ./gtest_unittest) +In C++, macros don't obey namespaces. Therefore two libraries that +both define a macro of the same name will clash if you #include both +definitions. In case a Google Test macro clashes with another +library, you can force Google Test to rename its macro to avoid the +conflict. -To use gtest.framework for your own tests, first, install the framework using -the steps described above. Then add it to your Xcode project by selecting -Project->Add to Project... from the main menu. Next, add libgtest_main.a from -gtest.framework/Resources directory using the same menu command. Finally, -create a new executable target and add gtest.framework and libgtest_main.a to -the "Link Binary With Libraries" build phase. +Specifically, if both Google Test and some other code define macro +FOO, you can add -### Using GNU Make ### -The make/ directory contains a Makefile that you can use to build -Google Test on systems where GNU make is available (e.g. Linux, Mac OS -X, and Cygwin). It doesn't try to build Google Test's own tests. -Instead, it just builds the Google Test library and a sample test. -You can use it as a starting point for your own Makefile. + -DGTEST_DONT_DEFINE_FOO=1 -If the default settings are correct for your environment, the -following commands should succeed: +to the compiler flags to tell Google Test to change the macro's name +from FOO to GTEST_FOO. Currently FOO can be FAIL, SUCCEED, or TEST. +For example, with -DGTEST_DONT_DEFINE_TEST=1, you'll need to write - cd ${SRCDIR}/make - make - ./sample1_unittest + GTEST_TEST(SomeTest, DoesThis) { ... } -If you see errors, try to tweak the contents of make/Makefile to make -them go away. There are instructions in make/Makefile on how to do -it. +instead of -### Using Your Own Build System ### -If none of the build solutions we provide works for you, or if you -prefer your own build system, you just need to compile -src/gtest-all.cc into a library and link your tests with it. Assuming -a Linux-like system and gcc, something like the following will do: + TEST(SomeTest, DoesThis) { ... } - cd ${SRCDIR} - g++ -I. -I./include -c src/gtest-all.cc - ar -rv libgtest.a gtest-all.o - g++ -I. -I./include path/to/your_test.cc libgtest.a -o your_test +in order to define a test. + +Upgrating from an Earlier Version +--------------------------------- + +We strive to keep Google Test releases backward compatible. +Sometimes, though, we have to make some breaking changes for the +users' long-term benefits. This section describes what you'll need to +do if you are upgrading from an earlier version of Google Test. + +### Upgrading from 1.3.0 or Earlier ### + +You may need to explicitly enable or disable Google Test's own TR1 +tuple library. See the instructions in section "Choosing a TR1 Tuple +Library". + +### Upgrading from 1.4.0 or Earlier ### + +The Autotools build script (configure + make) is no longer officially +supportted. You are encouraged to migrate to your own build system or +use CMake. If you still need to use Autotools, you can find +instructions in the README file from Google Test 1.4.0. + +On platforms where the pthread library is available, Google Test uses +it in order to be thread-safe. See the "Multi-threaded Tests" section +for what this means to your build script. + +If you use Microsoft Visual C++ 7.1 with exceptions disabled, Google +Test will no longer compile. This should affect very few people, as a +large portion of STL (including <string>) doesn't compile in this mode +anyway. We decided to stop supporting it in order to greatly simplify +Google Test's implementation. + +Developing Google Test +---------------------- + +This section discusses how to make your own changes to Google Test. + +### Testing Google Test Itself ### + +To make sure your changes work as intended and don't break existing +functionality, you'll want to compile and run Google Test's own tests. +For that you can use CMake: + + mkdir mybuild + cd mybuild + cmake -Dbuild_all_gtest_tests=ON ${GTEST_DIR} + +Make sure you have Python installed, as some of Google Test's tests +are written in Python. If the cmake command complains about not being +able to find Python ("Could NOT find PythonInterp (missing: +PYTHON_EXECUTABLE)"), try telling it explicitly where your Python +executable can be found: + + cmake -DPYTHON_EXECUTABLE=path/to/python -Dbuild_all_gtest_tests=ON \ + ${GTEST_DIR} + +Next, you can build Google Test and all of its own tests. On *nix, +this is usually done by 'make'. To run the tests, do + + make test + +All tests should pass. + +### Regenerating Source Files ### -Regenerating Source Files -------------------------- Some of Google Test's source files are generated from templates (not in the C++ sense) using a script. A template file is named FOO.pump, where FOO is the name of the file it will generate. For example, the @@ -307,12 +398,20 @@ file include/gtest/internal/gtest-type-util.h.pump is used to generate gtest-type-util.h in the same directory. Normally you don't need to worry about regenerating the source files, -unless you need to modify them (e.g. if you are working on a patch for -Google Test). In that case, you should modify the corresponding .pump -files instead and run the 'pump' script (for Pump is Useful for Meta -Programming) to regenerate them. We are still working on releasing -the script and its documentation. If you need it now, please email -googletestframework@googlegroups.com such that we know to make it -happen sooner. +unless you need to modify them. In that case, you should modify the +corresponding .pump files instead and run the pump.py Python script to +regenerate them. You can find pump.py in the scripts/ directory. +Read the Pump manual [2] for how to use it. + + [2] http://code.google.com/p/googletest/wiki/PumpManual + +### Contributing a Patch ### + +We welcome patches. Please read the Google Test developer's guide [3] +for how you can contribute. In particular, make sure you have signed +the Contributor License Agreement, or we won't be able to accept the +patch. + + [3] http://code.google.com/p/googletest/wiki/GoogleTestDevGuide Happy testing! |