From 8492211a441c6f046d6cd8ea6f21d614268a8221 Mon Sep 17 00:00:00 2001 From: Dmitry Shmidt Date: Wed, 1 Jun 2011 14:59:18 -0700 Subject: Add makefile for wpa_supplicant.conf Change-Id: Ibb631dbfae130a90ac6b9ef53e818df7dd561b17 Signed-off-by: Dmitry Shmidt --- wpa_supplicant/wpa_supplicant.conf | 892 +------------------------------- wpa_supplicant/wpa_supplicant.conf.orig | 892 ++++++++++++++++++++++++++++++++ wpa_supplicant/wpa_supplicant_conf.mk | 43 ++ wpa_supplicant/wpa_supplicant_conf.sh | 25 + 4 files changed, 963 insertions(+), 889 deletions(-) create mode 100644 wpa_supplicant/wpa_supplicant.conf.orig create mode 100644 wpa_supplicant/wpa_supplicant_conf.mk create mode 100755 wpa_supplicant/wpa_supplicant_conf.sh diff --git a/wpa_supplicant/wpa_supplicant.conf b/wpa_supplicant/wpa_supplicant.conf index b015744..a08eb33 100644 --- a/wpa_supplicant/wpa_supplicant.conf +++ b/wpa_supplicant/wpa_supplicant.conf @@ -1,892 +1,6 @@ -##### Example wpa_supplicant configuration file ############################### -# -# This file describes configuration file format and lists all available option. -# Please also take a look at simpler configuration examples in 'examples' -# subdirectory. -# -# Empty lines and lines starting with # are ignored - -# NOTE! This file may contain password information and should probably be made -# readable only by root user on multiuser systems. - -# Note: All file paths in this configuration file should use full (absolute, -# not relative to working directory) path in order to allow working directory -# to be changed. This can happen if wpa_supplicant is run in the background. - -# Whether to allow wpa_supplicant to update (overwrite) configuration -# -# This option can be used to allow wpa_supplicant to overwrite configuration -# file whenever configuration is changed (e.g., new network block is added with -# wpa_cli or wpa_gui, or a password is changed). This is required for -# wpa_cli/wpa_gui to be able to store the configuration changes permanently. -# Please note that overwriting configuration file will remove the comments from -# it. -#update_config=1 - -# global configuration (shared by all network blocks) -# -# Parameters for the control interface. If this is specified, wpa_supplicant -# will open a control interface that is available for external programs to -# manage wpa_supplicant. The meaning of this string depends on which control -# interface mechanism is used. For all cases, the existance of this parameter -# in configuration is used to determine whether the control interface is -# enabled. -# -# For UNIX domain sockets (default on Linux and BSD): This is a directory that -# will be created for UNIX domain sockets for listening to requests from -# external programs (CLI/GUI, etc.) for status information and configuration. -# The socket file will be named based on the interface name, so multiple -# wpa_supplicant processes can be run at the same time if more than one -# interface is used. -# /var/run/wpa_supplicant is the recommended directory for sockets and by -# default, wpa_cli will use it when trying to connect with wpa_supplicant. -# -# Access control for the control interface can be configured by setting the -# directory to allow only members of a group to use sockets. This way, it is -# possible to run wpa_supplicant as root (since it needs to change network -# configuration and open raw sockets) and still allow GUI/CLI components to be -# run as non-root users. However, since the control interface can be used to -# change the network configuration, this access needs to be protected in many -# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you -# want to allow non-root users to use the control interface, add a new group -# and change this value to match with that group. Add users that should have -# control interface access to this group. If this variable is commented out or -# not included in the configuration file, group will not be changed from the -# value it got by default when the directory or socket was created. -# -# When configuring both the directory and group, use following format: -# DIR=/var/run/wpa_supplicant GROUP=wheel -# DIR=/var/run/wpa_supplicant GROUP=0 -# (group can be either group name or gid) -# -# For UDP connections (default on Windows): The value will be ignored. This -# variable is just used to select that the control interface is to be created. -# The value can be set to, e.g., udp (ctrl_interface=udp) -# -# For Windows Named Pipe: This value can be used to set the security descriptor -# for controlling access to the control interface. Security descriptor can be -# set using Security Descriptor String Format (see http://msdn.microsoft.com/ -# library/default.asp?url=/library/en-us/secauthz/security/ -# security_descriptor_string_format.asp). The descriptor string needs to be -# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty -# DACL (which will reject all connections). See README-Windows.txt for more -# information about SDDL string format. -# -ctrl_interface=/var/run/wpa_supplicant - -# IEEE 802.1X/EAPOL version -# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines -# EAPOL version 2. However, there are many APs that do not handle the new -# version number correctly (they seem to drop the frames completely). In order -# to make wpa_supplicant interoperate with these APs, the version number is set -# to 1 by default. This configuration value can be used to set it to the new -# version (2). +##### wpa_supplicant configuration file template ##### +update_config=1 +ctrl_interface=wlan0 eapol_version=1 - -# AP scanning/selection -# By default, wpa_supplicant requests driver to perform AP scanning and then -# uses the scan results to select a suitable AP. Another alternative is to -# allow the driver to take care of AP scanning and selection and use -# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association -# information from the driver. -# 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to -# the currently enabled networks are found, a new network (IBSS or AP mode -# operation) may be initialized (if configured) (default) -# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association -# parameters (e.g., WPA IE generation); this mode can also be used with -# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with -# APs (i.e., external program needs to control association). This mode must -# also be used when using wired Ethernet drivers. -# 2: like 0, but associate with APs using security policy and SSID (but not -# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to -# enable operation with hidden SSIDs and optimized roaming; in this mode, -# the network blocks in the configuration file are tried one by one until -# the driver reports successful association; each network block should have -# explicit security policy (i.e., only one option in the lists) for -# key_mgmt, pairwise, group, proto variables -# When using IBSS or AP mode, ap_scan=2 mode can force the new network to be -# created immediately regardless of scan results. ap_scan=1 mode will first try -# to scan for existing networks and only if no matches with the enabled -# networks are found, a new IBSS or AP mode network is created. ap_scan=1 - -# EAP fast re-authentication -# By default, fast re-authentication is enabled for all EAP methods that -# support it. This variable can be used to disable fast re-authentication. -# Normally, there is no need to disable this. fast_reauth=1 - -# OpenSSL Engine support -# These options can be used to load OpenSSL engines. -# The two engines that are supported currently are shown below: -# They are both from the opensc project (http://www.opensc.org/) -# By default no engines are loaded. -# make the opensc engine available -#opensc_engine_path=/usr/lib/opensc/engine_opensc.so -# make the pkcs11 engine available -#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so -# configure the path to the pkcs11 module required by the pkcs11 engine -#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so - -# Dynamic EAP methods -# If EAP methods were built dynamically as shared object files, they need to be -# loaded here before being used in the network blocks. By default, EAP methods -# are included statically in the build, so these lines are not needed -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so -#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so - -# Driver interface parameters -# This field can be used to configure arbitrary driver interace parameters. The -# format is specific to the selected driver interface. This field is not used -# in most cases. -#driver_param="field=value" - -# Country code -# The ISO/IEC alpha2 country code for the country in which this device is -# currently operating. -#country=US - -# Maximum lifetime for PMKSA in seconds; default 43200 -#dot11RSNAConfigPMKLifetime=43200 -# Threshold for reauthentication (percentage of PMK lifetime); default 70 -#dot11RSNAConfigPMKReauthThreshold=70 -# Timeout for security association negotiation in seconds; default 60 -#dot11RSNAConfigSATimeout=60 - -# Wi-Fi Protected Setup (WPS) parameters - -# Universally Unique IDentifier (UUID; see RFC 4122) of the device -# If not configured, UUID will be generated based on the local MAC address. -#uuid=12345678-9abc-def0-1234-56789abcdef0 - -# Device Name -# User-friendly description of device; up to 32 octets encoded in UTF-8 -#device_name=Wireless Client - -# Manufacturer -# The manufacturer of the device (up to 64 ASCII characters) -#manufacturer=Company - -# Model Name -# Model of the device (up to 32 ASCII characters) -#model_name=cmodel - -# Model Number -# Additional device description (up to 32 ASCII characters) -#model_number=123 - -# Serial Number -# Serial number of the device (up to 32 characters) -#serial_number=12345 - -# Primary Device Type -# Used format: -- -# categ = Category as an integer value -# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for -# default WPS OUI -# subcateg = OUI-specific Sub Category as an integer value -# Examples: -# 1-0050F204-1 (Computer / PC) -# 1-0050F204-2 (Computer / Server) -# 5-0050F204-1 (Storage / NAS) -# 6-0050F204-1 (Network Infrastructure / AP) -#device_type=1-0050F204-1 - -# OS Version -# 4-octet operating system version number (hex string) -#os_version=01020300 - -# Config Methods -# List of the supported configuration methods -# Available methods: usba ethernet label display ext_nfc_token int_nfc_token -# nfc_interface push_button keypad virtual_display physical_display -# virtual_push_button physical_push_button -# For WSC 1.0: -#config_methods=label display push_button keypad -# For WSC 2.0: -#config_methods=label virtual_display virtual_push_button keypad - -# Credential processing -# 0 = process received credentials internally (default) -# 1 = do not process received credentials; just pass them over ctrl_iface to -# external program(s) -# 2 = process received credentials internally and pass them over ctrl_iface -# to external program(s) -#wps_cred_processing=0 - -# Maximum number of BSS entries to keep in memory -# Default: 200 -# This can be used to limit memory use on the BSS entries (cached scan -# results). A larger value may be needed in environments that have huge number -# of APs when using ap_scan=1 mode. -#bss_max_count=200 - - -# filter_ssids - SSID-based scan result filtering -# 0 = do not filter scan results (default) -# 1 = only include configured SSIDs in scan results/BSS table -#filter_ssids=0 - - -# network block -# -# Each network (usually AP's sharing the same SSID) is configured as a separate -# block in this configuration file. The network blocks are in preference order -# (the first match is used). -# -# network block fields: -# -# disabled: -# 0 = this network can be used (default) -# 1 = this network block is disabled (can be enabled through ctrl_iface, -# e.g., with wpa_cli or wpa_gui) -# -# id_str: Network identifier string for external scripts. This value is passed -# to external action script through wpa_cli as WPA_ID_STR environment -# variable to make it easier to do network specific configuration. -# -# ssid: SSID (mandatory); either as an ASCII string with double quotation or -# as hex string; network name -# -# scan_ssid: -# 0 = do not scan this SSID with specific Probe Request frames (default) -# 1 = scan with SSID-specific Probe Request frames (this can be used to -# find APs that do not accept broadcast SSID or use multiple SSIDs; -# this will add latency to scanning, so enable this only when needed) -# -# bssid: BSSID (optional); if set, this network block is used only when -# associating with the AP using the configured BSSID -# -# priority: priority group (integer) -# By default, all networks will get same priority group (0). If some of the -# networks are more desirable, this field can be used to change the order in -# which wpa_supplicant goes through the networks when selecting a BSS. The -# priority groups will be iterated in decreasing priority (i.e., the larger the -# priority value, the sooner the network is matched against the scan results). -# Within each priority group, networks will be selected based on security -# policy, signal strength, etc. -# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not -# using this priority to select the order for scanning. Instead, they try the -# networks in the order that used in the configuration file. -# -# mode: IEEE 802.11 operation mode -# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) -# 1 = IBSS (ad-hoc, peer-to-peer) -# 2 = AP (access point) -# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) -# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). WPA-None requires -# following network block options: -# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not -# both), and psk must also be set. -# -# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g., -# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial -# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode. -# In addition, this value is only used by the station that creates the IBSS. If -# an IBSS network with the configured SSID is already present, the frequency of -# the network will be used instead of this configured value. -# -# scan_freq: List of frequencies to scan -# Space-separated list of frequencies in MHz to scan when searching for this -# BSS. If the subset of channels used by the network is known, this option can -# be used to optimize scanning to not occur on channels that the network does -# not use. Example: scan_freq=2412 2437 2462 -# -# freq_list: Array of allowed frequencies -# Space-separated list of frequencies in MHz to allow for selecting the BSS. If -# set, scan results that do not match any of the specified frequencies are not -# considered when selecting a BSS. -# -# proto: list of accepted protocols -# WPA = WPA/IEEE 802.11i/D3.0 -# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) -# If not set, this defaults to: WPA RSN -# -# key_mgmt: list of accepted authenticated key management protocols -# WPA-PSK = WPA pre-shared key (this requires 'psk' field) -# WPA-EAP = WPA using EAP authentication -# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically -# generated WEP keys -# NONE = WPA is not used; plaintext or static WEP could be used -# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms -# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms -# If not set, this defaults to: WPA-PSK WPA-EAP -# -# auth_alg: list of allowed IEEE 802.11 authentication algorithms -# OPEN = Open System authentication (required for WPA/WPA2) -# SHARED = Shared Key authentication (requires static WEP keys) -# LEAP = LEAP/Network EAP (only used with LEAP) -# If not set, automatic selection is used (Open System with LEAP enabled if -# LEAP is allowed as one of the EAP methods). -# -# pairwise: list of accepted pairwise (unicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# NONE = Use only Group Keys (deprecated, should not be included if APs support -# pairwise keys) -# If not set, this defaults to: CCMP TKIP -# -# group: list of accepted group (broadcast/multicast) ciphers for WPA -# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] -# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] -# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key -# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] -# If not set, this defaults to: CCMP TKIP WEP104 WEP40 -# -# psk: WPA preshared key; 256-bit pre-shared key -# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., -# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be -# generated using the passphrase and SSID). ASCII passphrase must be between -# 8 and 63 characters (inclusive). -# This field is not needed, if WPA-EAP is used. -# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys -# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant -# startup and reconfiguration time can be optimized by generating the PSK only -# only when the passphrase or SSID has actually changed. -# -# eapol_flags: IEEE 802.1X/EAPOL options (bit field) -# Dynamic WEP key required for non-WPA mode -# bit0 (1): require dynamically generated unicast WEP key -# bit1 (2): require dynamically generated broadcast WEP key -# (3 = require both keys; default) -# Note: When using wired authentication, eapol_flags must be set to 0 for the -# authentication to be completed successfully. -# -# mixed_cell: This option can be used to configure whether so called mixed -# cells, i.e., networks that use both plaintext and encryption in the same -# SSID, are allowed when selecting a BSS form scan results. -# 0 = disabled (default) -# 1 = enabled -# -# proactive_key_caching: -# Enable/disable opportunistic PMKSA caching for WPA2. -# 0 = disabled (default) -# 1 = enabled -# -# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or -# hex without quotation, e.g., 0102030405) -# wep_tx_keyidx: Default WEP key index (TX) (0..3) -# -# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is -# allowed. This is only used with RSN/WPA2. -# 0 = disabled (default) -# 1 = enabled -#peerkey=1 -# -# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to -# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies. -# -# Following fields are only used with internal EAP implementation. -# eap: space-separated list of accepted EAP methods -# MD5 = EAP-MD5 (unsecure and does not generate keying material -> -# cannot be used with WPA; to be used as a Phase 2 method -# with EAP-PEAP or EAP-TTLS) -# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# OTP = EAP-OTP (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# GTC = EAP-GTC (cannot be used separately with WPA; to be used -# as a Phase 2 method with EAP-PEAP or EAP-TTLS) -# TLS = EAP-TLS (client and server certificate) -# PEAP = EAP-PEAP (with tunnelled EAP authentication) -# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 -# authentication) -# If not set, all compiled in methods are allowed. -# -# identity: Identity string for EAP -# This field is also used to configure user NAI for -# EAP-PSK/PAX/SAKE/GPSK. -# anonymous_identity: Anonymous identity string for EAP (to be used as the -# unencrypted identity with EAP types that support different tunnelled -# identity, e.g., EAP-TTLS) -# password: Password string for EAP. This field can include either the -# plaintext password (using ASCII or hex string) or a NtPasswordHash -# (16-byte MD4 hash of password) in hash:<32 hex digits> format. -# NtPasswordHash can only be used when the password is for MSCHAPv2 or -# MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP). -# EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit -# PSK) is also configured using this field. For EAP-GPSK, this is a -# variable length PSK. -# ca_cert: File path to CA certificate file (PEM/DER). This file can have one -# or more trusted CA certificates. If ca_cert and ca_path are not -# included, server certificate will not be verified. This is insecure and -# a trusted CA certificate should always be configured when using -# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may -# change when wpa_supplicant is run in the background. -# -# Alternatively, this can be used to only perform matching of the server -# certificate (SHA-256 hash of the DER encoded X.509 certificate). In -# this case, the possible CA certificates in the server certificate chain -# are ignored and only the server certificate is verified. This is -# configured with the following format: -# hash:://server/sha256/cert_hash_in_hex -# For example: "hash://server/sha256/ -# 5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" -# -# On Windows, trusted CA certificates can be loaded from the system -# certificate store by setting this to cert_store://, e.g., -# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". -# Note that when running wpa_supplicant as an application, the user -# certificate store (My user account) is used, whereas computer store -# (Computer account) is used when running wpasvc as a service. -# ca_path: Directory path for CA certificate files (PEM). This path may -# contain multiple CA certificates in OpenSSL format. Common use for this -# is to point to system trusted CA list which is often installed into -# directory like /etc/ssl/certs. If configured, these certificates are -# added to the list of trusted CAs. ca_cert may also be included in that -# case, but it is not required. -# client_cert: File path to client certificate file (PEM/DER) -# Full path should be used since working directory may change when -# wpa_supplicant is run in the background. -# Alternatively, a named configuration blob can be used by setting this -# to blob://. -# private_key: File path to client private key file (PEM/DER/PFX) -# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be -# commented out. Both the private key and certificate will be read from -# the PKCS#12 file in this case. Full path should be used since working -# directory may change when wpa_supplicant is run in the background. -# Windows certificate store can be used by leaving client_cert out and -# configuring private_key in one of the following formats: -# cert://substring_to_match -# hash://certificate_thumbprint_in_hex -# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" -# Note that when running wpa_supplicant as an application, the user -# certificate store (My user account) is used, whereas computer store -# (Computer account) is used when running wpasvc as a service. -# Alternatively, a named configuration blob can be used by setting this -# to blob://. -# private_key_passwd: Password for private key file (if left out, this will be -# asked through control interface) -# dh_file: File path to DH/DSA parameters file (in PEM format) -# This is an optional configuration file for setting parameters for an -# ephemeral DH key exchange. In most cases, the default RSA -# authentication does not use this configuration. However, it is possible -# setup RSA to use ephemeral DH key exchange. In addition, ciphers with -# DSA keys always use ephemeral DH keys. This can be used to achieve -# forward secrecy. If the file is in DSA parameters format, it will be -# automatically converted into DH params. -# subject_match: Substring to be matched against the subject of the -# authentication server certificate. If this string is set, the server -# sertificate is only accepted if it contains this string in the subject. -# The subject string is in following format: -# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com -# altsubject_match: Semicolon separated string of entries to be matched against -# the alternative subject name of the authentication server certificate. -# If this string is set, the server sertificate is only accepted if it -# contains one of the entries in an alternative subject name extension. -# altSubjectName string is in following format: TYPE:VALUE -# Example: EMAIL:server@example.com -# Example: DNS:server.example.com;DNS:server2.example.com -# Following types are supported: EMAIL, DNS, URI -# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters -# (string with field-value pairs, e.g., "peapver=0" or -# "peapver=1 peaplabel=1") -# 'peapver' can be used to force which PEAP version (0 or 1) is used. -# 'peaplabel=1' can be used to force new label, "client PEAP encryption", -# to be used during key derivation when PEAPv1 or newer. Most existing -# PEAPv1 implementation seem to be using the old label, "client EAP -# encryption", and wpa_supplicant is now using that as the default value. -# Some servers, e.g., Radiator, may require peaplabel=1 configuration to -# interoperate with PEAPv1; see eap_testing.txt for more details. -# 'peap_outer_success=0' can be used to terminate PEAP authentication on -# tunneled EAP-Success. This is required with some RADIUS servers that -# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., -# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) -# include_tls_length=1 can be used to force wpa_supplicant to include -# TLS Message Length field in all TLS messages even if they are not -# fragmented. -# sim_min_num_chal=3 can be used to configure EAP-SIM to require three -# challenges (by default, it accepts 2 or 3) -# result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use -# protected result indication. -# 'crypto_binding' option can be used to control PEAPv0 cryptobinding -# behavior: -# * 0 = do not use cryptobinding (default) -# * 1 = use cryptobinding if server supports it -# * 2 = require cryptobinding -# EAP-WSC (WPS) uses following options: pin= or -# pbc=1. -# phase2: Phase2 (inner authentication with TLS tunnel) parameters -# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or -# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) -# Following certificate/private key fields are used in inner Phase2 -# authentication when using EAP-TTLS or EAP-PEAP. -# ca_cert2: File path to CA certificate file. This file can have one or more -# trusted CA certificates. If ca_cert2 and ca_path2 are not included, -# server certificate will not be verified. This is insecure and a trusted -# CA certificate should always be configured. -# ca_path2: Directory path for CA certificate files (PEM) -# client_cert2: File path to client certificate file -# private_key2: File path to client private key file -# private_key2_passwd: Password for private key file -# dh_file2: File path to DH/DSA parameters file (in PEM format) -# subject_match2: Substring to be matched against the subject of the -# authentication server certificate. -# altsubject_match2: Substring to be matched against the alternative subject -# name of the authentication server certificate. -# -# fragment_size: Maximum EAP fragment size in bytes (default 1398). -# This value limits the fragment size for EAP methods that support -# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set -# small enough to make the EAP messages fit in MTU of the network -# interface used for EAPOL. The default value is suitable for most -# cases. -# -# EAP-FAST variables: -# pac_file: File path for the PAC entries. wpa_supplicant will need to be able -# to create this file and write updates to it when PAC is being -# provisioned or refreshed. Full path to the file should be used since -# working directory may change when wpa_supplicant is run in the -# background. Alternatively, a named configuration blob can be used by -# setting this to blob:// -# phase1: fast_provisioning option can be used to enable in-line provisioning -# of EAP-FAST credentials (PAC): -# 0 = disabled, -# 1 = allow unauthenticated provisioning, -# 2 = allow authenticated provisioning, -# 3 = allow both unauthenticated and authenticated provisioning -# fast_max_pac_list_len= option can be used to set the maximum -# number of PAC entries to store in a PAC list (default: 10) -# fast_pac_format=binary option can be used to select binary format for -# storing PAC entries in order to save some space (the default -# text format uses about 2.5 times the size of minimal binary -# format) -# -# wpa_supplicant supports number of "EAP workarounds" to work around -# interoperability issues with incorrectly behaving authentication servers. -# These are enabled by default because some of the issues are present in large -# number of authentication servers. Strict EAP conformance mode can be -# configured by disabling workarounds with eap_workaround=0. - -# Example blocks: - -# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers -network={ - ssid="simple" - psk="very secret passphrase" - priority=5 -} - -# Same as previous, but request SSID-specific scanning (for APs that reject -# broadcast SSID) -network={ - ssid="second ssid" - scan_ssid=1 - psk="very secret passphrase" - priority=2 -} - -# Only WPA-PSK is used. Any valid cipher combination is accepted. -network={ - ssid="example" - proto=WPA - key_mgmt=WPA-PSK - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb - priority=2 -} - -# WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying -network={ - ssid="example" - proto=WPA - key_mgmt=WPA-PSK - pairwise=TKIP - group=TKIP - psk="not so secure passphrase" - wpa_ptk_rekey=600 -} - -# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 -# or WEP40 as the group cipher will not be accepted. -network={ - ssid="example" - proto=RSN - key_mgmt=WPA-EAP - pairwise=CCMP TKIP - group=CCMP TKIP - eap=TLS - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - priority=1 -} - -# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel -# (e.g., Radiator) -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=PEAP - identity="user@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - phase1="peaplabel=1" - phase2="auth=MSCHAPV2" - priority=10 -} - -# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the -# unencrypted use. Real identity is sent only within an encrypted TLS tunnel. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - priority=2 -} - -# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted -# use. Real identity is sent only within an encrypted TLS tunnel. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - phase2="auth=MSCHAPV2" -} - -# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner -# authentication. -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - # Phase1 / outer authentication - anonymous_identity="anonymous@example.com" - ca_cert="/etc/cert/ca.pem" - # Phase 2 / inner authentication - phase2="autheap=TLS" - ca_cert2="/etc/cert/ca2.pem" - client_cert2="/etc/cer/user.pem" - private_key2="/etc/cer/user.prv" - private_key2_passwd="password" - priority=2 -} - -# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and -# group cipher. -network={ - ssid="example" - bssid=00:11:22:33:44:55 - proto=WPA RSN - key_mgmt=WPA-PSK WPA-EAP - pairwise=CCMP - group=CCMP - psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb -} - -# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP -# and all valid ciphers. -network={ - ssid=00010203 - psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f -} - - -# EAP-SIM with a GSM SIM or USIM -network={ - ssid="eap-sim-test" - key_mgmt=WPA-EAP - eap=SIM - pin="1234" - pcsc="" -} - - -# EAP-PSK -network={ - ssid="eap-psk-test" - key_mgmt=WPA-EAP - eap=PSK - anonymous_identity="eap_psk_user" - password=06b4be19da289f475aa46a33cb793029 - identity="eap_psk_user@example.com" -} - - -# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using -# EAP-TLS for authentication and key generation; require both unicast and -# broadcast WEP keys. -network={ - ssid="1x-test" - key_mgmt=IEEE8021X - eap=TLS - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - eapol_flags=3 -} - - -# LEAP with dynamic WEP keys -network={ - ssid="leap-example" - key_mgmt=IEEE8021X - eap=LEAP - identity="user" - password="foobar" -} - -# EAP-IKEv2 using shared secrets for both server and peer authentication -network={ - ssid="ikev2-example" - key_mgmt=WPA-EAP - eap=IKEV2 - identity="user" - password="foobar" -} - -# EAP-FAST with WPA (WPA or WPA2) -network={ - ssid="eap-fast-test" - key_mgmt=WPA-EAP - eap=FAST - anonymous_identity="FAST-000102030405" - identity="username" - password="password" - phase1="fast_provisioning=1" - pac_file="/etc/wpa_supplicant.eap-fast-pac" -} - -network={ - ssid="eap-fast-test" - key_mgmt=WPA-EAP - eap=FAST - anonymous_identity="FAST-000102030405" - identity="username" - password="password" - phase1="fast_provisioning=1" - pac_file="blob://eap-fast-pac" -} - -# Plaintext connection (no WPA, no IEEE 802.1X) -network={ - ssid="plaintext-test" - key_mgmt=NONE -} - - -# Shared WEP key connection (no WPA, no IEEE 802.1X) -network={ - ssid="static-wep-test" - key_mgmt=NONE - wep_key0="abcde" - wep_key1=0102030405 - wep_key2="1234567890123" - wep_tx_keyidx=0 - priority=5 -} - - -# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key -# IEEE 802.11 authentication -network={ - ssid="static-wep-test2" - key_mgmt=NONE - wep_key0="abcde" - wep_key1=0102030405 - wep_key2="1234567890123" - wep_tx_keyidx=0 - priority=5 - auth_alg=SHARED -} - - -# IBSS/ad-hoc network with WPA-None/TKIP. -network={ - ssid="test adhoc" - mode=1 - frequency=2412 - proto=WPA - key_mgmt=WPA-NONE - pairwise=NONE - group=TKIP - psk="secret passphrase" -} - - -# Catch all example that allows more or less all configuration modes -network={ - ssid="example" - scan_ssid=1 - key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE - pairwise=CCMP TKIP - group=CCMP TKIP WEP104 WEP40 - psk="very secret passphrase" - eap=TTLS PEAP TLS - identity="user@example.com" - password="foobar" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - private_key="/etc/cert/user.prv" - private_key_passwd="password" - phase1="peaplabel=0" -} - -# Example of EAP-TLS with smartcard (openssl engine) -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TLS - proto=RSN - pairwise=CCMP TKIP - group=CCMP TKIP - identity="user@example.com" - ca_cert="/etc/cert/ca.pem" - client_cert="/etc/cert/user.pem" - - engine=1 - - # The engine configured here must be available. Look at - # OpenSSL engine support in the global section. - # The key available through the engine must be the private key - # matching the client certificate configured above. - - # use the opensc engine - #engine_id="opensc" - #key_id="45" - - # use the pkcs11 engine - engine_id="pkcs11" - key_id="id_45" - - # Optional PIN configuration; this can be left out and PIN will be - # asked through the control interface - pin="1234" -} - -# Example configuration showing how to use an inlined blob as a CA certificate -# data instead of using external file -network={ - ssid="example" - key_mgmt=WPA-EAP - eap=TTLS - identity="user@example.com" - anonymous_identity="anonymous@example.com" - password="foobar" - ca_cert="blob://exampleblob" - priority=20 -} - -blob-base64-exampleblob={ -SGVsbG8gV29ybGQhCg== -} - - -# Wildcard match for SSID (plaintext APs only). This example select any -# open AP regardless of its SSID. -network={ - key_mgmt=NONE -} diff --git a/wpa_supplicant/wpa_supplicant.conf.orig b/wpa_supplicant/wpa_supplicant.conf.orig new file mode 100644 index 0000000..b015744 --- /dev/null +++ b/wpa_supplicant/wpa_supplicant.conf.orig @@ -0,0 +1,892 @@ +##### Example wpa_supplicant configuration file ############################### +# +# This file describes configuration file format and lists all available option. +# Please also take a look at simpler configuration examples in 'examples' +# subdirectory. +# +# Empty lines and lines starting with # are ignored + +# NOTE! This file may contain password information and should probably be made +# readable only by root user on multiuser systems. + +# Note: All file paths in this configuration file should use full (absolute, +# not relative to working directory) path in order to allow working directory +# to be changed. This can happen if wpa_supplicant is run in the background. + +# Whether to allow wpa_supplicant to update (overwrite) configuration +# +# This option can be used to allow wpa_supplicant to overwrite configuration +# file whenever configuration is changed (e.g., new network block is added with +# wpa_cli or wpa_gui, or a password is changed). This is required for +# wpa_cli/wpa_gui to be able to store the configuration changes permanently. +# Please note that overwriting configuration file will remove the comments from +# it. +#update_config=1 + +# global configuration (shared by all network blocks) +# +# Parameters for the control interface. If this is specified, wpa_supplicant +# will open a control interface that is available for external programs to +# manage wpa_supplicant. The meaning of this string depends on which control +# interface mechanism is used. For all cases, the existance of this parameter +# in configuration is used to determine whether the control interface is +# enabled. +# +# For UNIX domain sockets (default on Linux and BSD): This is a directory that +# will be created for UNIX domain sockets for listening to requests from +# external programs (CLI/GUI, etc.) for status information and configuration. +# The socket file will be named based on the interface name, so multiple +# wpa_supplicant processes can be run at the same time if more than one +# interface is used. +# /var/run/wpa_supplicant is the recommended directory for sockets and by +# default, wpa_cli will use it when trying to connect with wpa_supplicant. +# +# Access control for the control interface can be configured by setting the +# directory to allow only members of a group to use sockets. This way, it is +# possible to run wpa_supplicant as root (since it needs to change network +# configuration and open raw sockets) and still allow GUI/CLI components to be +# run as non-root users. However, since the control interface can be used to +# change the network configuration, this access needs to be protected in many +# cases. By default, wpa_supplicant is configured to use gid 0 (root). If you +# want to allow non-root users to use the control interface, add a new group +# and change this value to match with that group. Add users that should have +# control interface access to this group. If this variable is commented out or +# not included in the configuration file, group will not be changed from the +# value it got by default when the directory or socket was created. +# +# When configuring both the directory and group, use following format: +# DIR=/var/run/wpa_supplicant GROUP=wheel +# DIR=/var/run/wpa_supplicant GROUP=0 +# (group can be either group name or gid) +# +# For UDP connections (default on Windows): The value will be ignored. This +# variable is just used to select that the control interface is to be created. +# The value can be set to, e.g., udp (ctrl_interface=udp) +# +# For Windows Named Pipe: This value can be used to set the security descriptor +# for controlling access to the control interface. Security descriptor can be +# set using Security Descriptor String Format (see http://msdn.microsoft.com/ +# library/default.asp?url=/library/en-us/secauthz/security/ +# security_descriptor_string_format.asp). The descriptor string needs to be +# prefixed with SDDL=. For example, ctrl_interface=SDDL=D: would set an empty +# DACL (which will reject all connections). See README-Windows.txt for more +# information about SDDL string format. +# +ctrl_interface=/var/run/wpa_supplicant + +# IEEE 802.1X/EAPOL version +# wpa_supplicant is implemented based on IEEE Std 802.1X-2004 which defines +# EAPOL version 2. However, there are many APs that do not handle the new +# version number correctly (they seem to drop the frames completely). In order +# to make wpa_supplicant interoperate with these APs, the version number is set +# to 1 by default. This configuration value can be used to set it to the new +# version (2). +eapol_version=1 + +# AP scanning/selection +# By default, wpa_supplicant requests driver to perform AP scanning and then +# uses the scan results to select a suitable AP. Another alternative is to +# allow the driver to take care of AP scanning and selection and use +# wpa_supplicant just to process EAPOL frames based on IEEE 802.11 association +# information from the driver. +# 1: wpa_supplicant initiates scanning and AP selection; if no APs matching to +# the currently enabled networks are found, a new network (IBSS or AP mode +# operation) may be initialized (if configured) (default) +# 0: driver takes care of scanning, AP selection, and IEEE 802.11 association +# parameters (e.g., WPA IE generation); this mode can also be used with +# non-WPA drivers when using IEEE 802.1X mode; do not try to associate with +# APs (i.e., external program needs to control association). This mode must +# also be used when using wired Ethernet drivers. +# 2: like 0, but associate with APs using security policy and SSID (but not +# BSSID); this can be used, e.g., with ndiswrapper and NDIS drivers to +# enable operation with hidden SSIDs and optimized roaming; in this mode, +# the network blocks in the configuration file are tried one by one until +# the driver reports successful association; each network block should have +# explicit security policy (i.e., only one option in the lists) for +# key_mgmt, pairwise, group, proto variables +# When using IBSS or AP mode, ap_scan=2 mode can force the new network to be +# created immediately regardless of scan results. ap_scan=1 mode will first try +# to scan for existing networks and only if no matches with the enabled +# networks are found, a new IBSS or AP mode network is created. +ap_scan=1 + +# EAP fast re-authentication +# By default, fast re-authentication is enabled for all EAP methods that +# support it. This variable can be used to disable fast re-authentication. +# Normally, there is no need to disable this. +fast_reauth=1 + +# OpenSSL Engine support +# These options can be used to load OpenSSL engines. +# The two engines that are supported currently are shown below: +# They are both from the opensc project (http://www.opensc.org/) +# By default no engines are loaded. +# make the opensc engine available +#opensc_engine_path=/usr/lib/opensc/engine_opensc.so +# make the pkcs11 engine available +#pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so +# configure the path to the pkcs11 module required by the pkcs11 engine +#pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so + +# Dynamic EAP methods +# If EAP methods were built dynamically as shared object files, they need to be +# loaded here before being used in the network blocks. By default, EAP methods +# are included statically in the build, so these lines are not needed +#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_tls.so +#load_dynamic_eap=/usr/lib/wpa_supplicant/eap_md5.so + +# Driver interface parameters +# This field can be used to configure arbitrary driver interace parameters. The +# format is specific to the selected driver interface. This field is not used +# in most cases. +#driver_param="field=value" + +# Country code +# The ISO/IEC alpha2 country code for the country in which this device is +# currently operating. +#country=US + +# Maximum lifetime for PMKSA in seconds; default 43200 +#dot11RSNAConfigPMKLifetime=43200 +# Threshold for reauthentication (percentage of PMK lifetime); default 70 +#dot11RSNAConfigPMKReauthThreshold=70 +# Timeout for security association negotiation in seconds; default 60 +#dot11RSNAConfigSATimeout=60 + +# Wi-Fi Protected Setup (WPS) parameters + +# Universally Unique IDentifier (UUID; see RFC 4122) of the device +# If not configured, UUID will be generated based on the local MAC address. +#uuid=12345678-9abc-def0-1234-56789abcdef0 + +# Device Name +# User-friendly description of device; up to 32 octets encoded in UTF-8 +#device_name=Wireless Client + +# Manufacturer +# The manufacturer of the device (up to 64 ASCII characters) +#manufacturer=Company + +# Model Name +# Model of the device (up to 32 ASCII characters) +#model_name=cmodel + +# Model Number +# Additional device description (up to 32 ASCII characters) +#model_number=123 + +# Serial Number +# Serial number of the device (up to 32 characters) +#serial_number=12345 + +# Primary Device Type +# Used format: -- +# categ = Category as an integer value +# OUI = OUI and type octet as a 4-octet hex-encoded value; 0050F204 for +# default WPS OUI +# subcateg = OUI-specific Sub Category as an integer value +# Examples: +# 1-0050F204-1 (Computer / PC) +# 1-0050F204-2 (Computer / Server) +# 5-0050F204-1 (Storage / NAS) +# 6-0050F204-1 (Network Infrastructure / AP) +#device_type=1-0050F204-1 + +# OS Version +# 4-octet operating system version number (hex string) +#os_version=01020300 + +# Config Methods +# List of the supported configuration methods +# Available methods: usba ethernet label display ext_nfc_token int_nfc_token +# nfc_interface push_button keypad virtual_display physical_display +# virtual_push_button physical_push_button +# For WSC 1.0: +#config_methods=label display push_button keypad +# For WSC 2.0: +#config_methods=label virtual_display virtual_push_button keypad + +# Credential processing +# 0 = process received credentials internally (default) +# 1 = do not process received credentials; just pass them over ctrl_iface to +# external program(s) +# 2 = process received credentials internally and pass them over ctrl_iface +# to external program(s) +#wps_cred_processing=0 + +# Maximum number of BSS entries to keep in memory +# Default: 200 +# This can be used to limit memory use on the BSS entries (cached scan +# results). A larger value may be needed in environments that have huge number +# of APs when using ap_scan=1 mode. +#bss_max_count=200 + + +# filter_ssids - SSID-based scan result filtering +# 0 = do not filter scan results (default) +# 1 = only include configured SSIDs in scan results/BSS table +#filter_ssids=0 + + +# network block +# +# Each network (usually AP's sharing the same SSID) is configured as a separate +# block in this configuration file. The network blocks are in preference order +# (the first match is used). +# +# network block fields: +# +# disabled: +# 0 = this network can be used (default) +# 1 = this network block is disabled (can be enabled through ctrl_iface, +# e.g., with wpa_cli or wpa_gui) +# +# id_str: Network identifier string for external scripts. This value is passed +# to external action script through wpa_cli as WPA_ID_STR environment +# variable to make it easier to do network specific configuration. +# +# ssid: SSID (mandatory); either as an ASCII string with double quotation or +# as hex string; network name +# +# scan_ssid: +# 0 = do not scan this SSID with specific Probe Request frames (default) +# 1 = scan with SSID-specific Probe Request frames (this can be used to +# find APs that do not accept broadcast SSID or use multiple SSIDs; +# this will add latency to scanning, so enable this only when needed) +# +# bssid: BSSID (optional); if set, this network block is used only when +# associating with the AP using the configured BSSID +# +# priority: priority group (integer) +# By default, all networks will get same priority group (0). If some of the +# networks are more desirable, this field can be used to change the order in +# which wpa_supplicant goes through the networks when selecting a BSS. The +# priority groups will be iterated in decreasing priority (i.e., the larger the +# priority value, the sooner the network is matched against the scan results). +# Within each priority group, networks will be selected based on security +# policy, signal strength, etc. +# Please note that AP scanning with scan_ssid=1 and ap_scan=2 mode are not +# using this priority to select the order for scanning. Instead, they try the +# networks in the order that used in the configuration file. +# +# mode: IEEE 802.11 operation mode +# 0 = infrastructure (Managed) mode, i.e., associate with an AP (default) +# 1 = IBSS (ad-hoc, peer-to-peer) +# 2 = AP (access point) +# Note: IBSS can only be used with key_mgmt NONE (plaintext and static WEP) +# and key_mgmt=WPA-NONE (fixed group key TKIP/CCMP). WPA-None requires +# following network block options: +# proto=WPA, key_mgmt=WPA-NONE, pairwise=NONE, group=TKIP (or CCMP, but not +# both), and psk must also be set. +# +# frequency: Channel frequency in megahertz (MHz) for IBSS, e.g., +# 2412 = IEEE 802.11b/g channel 1. This value is used to configure the initial +# channel for IBSS (adhoc) networks. It is ignored in the infrastructure mode. +# In addition, this value is only used by the station that creates the IBSS. If +# an IBSS network with the configured SSID is already present, the frequency of +# the network will be used instead of this configured value. +# +# scan_freq: List of frequencies to scan +# Space-separated list of frequencies in MHz to scan when searching for this +# BSS. If the subset of channels used by the network is known, this option can +# be used to optimize scanning to not occur on channels that the network does +# not use. Example: scan_freq=2412 2437 2462 +# +# freq_list: Array of allowed frequencies +# Space-separated list of frequencies in MHz to allow for selecting the BSS. If +# set, scan results that do not match any of the specified frequencies are not +# considered when selecting a BSS. +# +# proto: list of accepted protocols +# WPA = WPA/IEEE 802.11i/D3.0 +# RSN = WPA2/IEEE 802.11i (also WPA2 can be used as an alias for RSN) +# If not set, this defaults to: WPA RSN +# +# key_mgmt: list of accepted authenticated key management protocols +# WPA-PSK = WPA pre-shared key (this requires 'psk' field) +# WPA-EAP = WPA using EAP authentication +# IEEE8021X = IEEE 802.1X using EAP authentication and (optionally) dynamically +# generated WEP keys +# NONE = WPA is not used; plaintext or static WEP could be used +# WPA-PSK-SHA256 = Like WPA-PSK but using stronger SHA256-based algorithms +# WPA-EAP-SHA256 = Like WPA-EAP but using stronger SHA256-based algorithms +# If not set, this defaults to: WPA-PSK WPA-EAP +# +# auth_alg: list of allowed IEEE 802.11 authentication algorithms +# OPEN = Open System authentication (required for WPA/WPA2) +# SHARED = Shared Key authentication (requires static WEP keys) +# LEAP = LEAP/Network EAP (only used with LEAP) +# If not set, automatic selection is used (Open System with LEAP enabled if +# LEAP is allowed as one of the EAP methods). +# +# pairwise: list of accepted pairwise (unicast) ciphers for WPA +# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] +# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] +# NONE = Use only Group Keys (deprecated, should not be included if APs support +# pairwise keys) +# If not set, this defaults to: CCMP TKIP +# +# group: list of accepted group (broadcast/multicast) ciphers for WPA +# CCMP = AES in Counter mode with CBC-MAC [RFC 3610, IEEE 802.11i/D7.0] +# TKIP = Temporal Key Integrity Protocol [IEEE 802.11i/D7.0] +# WEP104 = WEP (Wired Equivalent Privacy) with 104-bit key +# WEP40 = WEP (Wired Equivalent Privacy) with 40-bit key [IEEE 802.11] +# If not set, this defaults to: CCMP TKIP WEP104 WEP40 +# +# psk: WPA preshared key; 256-bit pre-shared key +# The key used in WPA-PSK mode can be entered either as 64 hex-digits, i.e., +# 32 bytes or as an ASCII passphrase (in which case, the real PSK will be +# generated using the passphrase and SSID). ASCII passphrase must be between +# 8 and 63 characters (inclusive). +# This field is not needed, if WPA-EAP is used. +# Note: Separate tool, wpa_passphrase, can be used to generate 256-bit keys +# from ASCII passphrase. This process uses lot of CPU and wpa_supplicant +# startup and reconfiguration time can be optimized by generating the PSK only +# only when the passphrase or SSID has actually changed. +# +# eapol_flags: IEEE 802.1X/EAPOL options (bit field) +# Dynamic WEP key required for non-WPA mode +# bit0 (1): require dynamically generated unicast WEP key +# bit1 (2): require dynamically generated broadcast WEP key +# (3 = require both keys; default) +# Note: When using wired authentication, eapol_flags must be set to 0 for the +# authentication to be completed successfully. +# +# mixed_cell: This option can be used to configure whether so called mixed +# cells, i.e., networks that use both plaintext and encryption in the same +# SSID, are allowed when selecting a BSS form scan results. +# 0 = disabled (default) +# 1 = enabled +# +# proactive_key_caching: +# Enable/disable opportunistic PMKSA caching for WPA2. +# 0 = disabled (default) +# 1 = enabled +# +# wep_key0..3: Static WEP key (ASCII in double quotation, e.g. "abcde" or +# hex without quotation, e.g., 0102030405) +# wep_tx_keyidx: Default WEP key index (TX) (0..3) +# +# peerkey: Whether PeerKey negotiation for direct links (IEEE 802.11e DLS) is +# allowed. This is only used with RSN/WPA2. +# 0 = disabled (default) +# 1 = enabled +#peerkey=1 +# +# wpa_ptk_rekey: Maximum lifetime for PTK in seconds. This can be used to +# enforce rekeying of PTK to mitigate some attacks against TKIP deficiencies. +# +# Following fields are only used with internal EAP implementation. +# eap: space-separated list of accepted EAP methods +# MD5 = EAP-MD5 (unsecure and does not generate keying material -> +# cannot be used with WPA; to be used as a Phase 2 method +# with EAP-PEAP or EAP-TTLS) +# MSCHAPV2 = EAP-MSCHAPv2 (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# OTP = EAP-OTP (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# GTC = EAP-GTC (cannot be used separately with WPA; to be used +# as a Phase 2 method with EAP-PEAP or EAP-TTLS) +# TLS = EAP-TLS (client and server certificate) +# PEAP = EAP-PEAP (with tunnelled EAP authentication) +# TTLS = EAP-TTLS (with tunnelled EAP or PAP/CHAP/MSCHAP/MSCHAPV2 +# authentication) +# If not set, all compiled in methods are allowed. +# +# identity: Identity string for EAP +# This field is also used to configure user NAI for +# EAP-PSK/PAX/SAKE/GPSK. +# anonymous_identity: Anonymous identity string for EAP (to be used as the +# unencrypted identity with EAP types that support different tunnelled +# identity, e.g., EAP-TTLS) +# password: Password string for EAP. This field can include either the +# plaintext password (using ASCII or hex string) or a NtPasswordHash +# (16-byte MD4 hash of password) in hash:<32 hex digits> format. +# NtPasswordHash can only be used when the password is for MSCHAPv2 or +# MSCHAP (EAP-MSCHAPv2, EAP-TTLS/MSCHAPv2, EAP-TTLS/MSCHAP, LEAP). +# EAP-PSK (128-bit PSK), EAP-PAX (128-bit PSK), and EAP-SAKE (256-bit +# PSK) is also configured using this field. For EAP-GPSK, this is a +# variable length PSK. +# ca_cert: File path to CA certificate file (PEM/DER). This file can have one +# or more trusted CA certificates. If ca_cert and ca_path are not +# included, server certificate will not be verified. This is insecure and +# a trusted CA certificate should always be configured when using +# EAP-TLS/TTLS/PEAP. Full path should be used since working directory may +# change when wpa_supplicant is run in the background. +# +# Alternatively, this can be used to only perform matching of the server +# certificate (SHA-256 hash of the DER encoded X.509 certificate). In +# this case, the possible CA certificates in the server certificate chain +# are ignored and only the server certificate is verified. This is +# configured with the following format: +# hash:://server/sha256/cert_hash_in_hex +# For example: "hash://server/sha256/ +# 5a1bc1296205e6fdbe3979728efe3920798885c1c4590b5f90f43222d239ca6a" +# +# On Windows, trusted CA certificates can be loaded from the system +# certificate store by setting this to cert_store://, e.g., +# ca_cert="cert_store://CA" or ca_cert="cert_store://ROOT". +# Note that when running wpa_supplicant as an application, the user +# certificate store (My user account) is used, whereas computer store +# (Computer account) is used when running wpasvc as a service. +# ca_path: Directory path for CA certificate files (PEM). This path may +# contain multiple CA certificates in OpenSSL format. Common use for this +# is to point to system trusted CA list which is often installed into +# directory like /etc/ssl/certs. If configured, these certificates are +# added to the list of trusted CAs. ca_cert may also be included in that +# case, but it is not required. +# client_cert: File path to client certificate file (PEM/DER) +# Full path should be used since working directory may change when +# wpa_supplicant is run in the background. +# Alternatively, a named configuration blob can be used by setting this +# to blob://. +# private_key: File path to client private key file (PEM/DER/PFX) +# When PKCS#12/PFX file (.p12/.pfx) is used, client_cert should be +# commented out. Both the private key and certificate will be read from +# the PKCS#12 file in this case. Full path should be used since working +# directory may change when wpa_supplicant is run in the background. +# Windows certificate store can be used by leaving client_cert out and +# configuring private_key in one of the following formats: +# cert://substring_to_match +# hash://certificate_thumbprint_in_hex +# for example: private_key="hash://63093aa9c47f56ae88334c7b65a4" +# Note that when running wpa_supplicant as an application, the user +# certificate store (My user account) is used, whereas computer store +# (Computer account) is used when running wpasvc as a service. +# Alternatively, a named configuration blob can be used by setting this +# to blob://. +# private_key_passwd: Password for private key file (if left out, this will be +# asked through control interface) +# dh_file: File path to DH/DSA parameters file (in PEM format) +# This is an optional configuration file for setting parameters for an +# ephemeral DH key exchange. In most cases, the default RSA +# authentication does not use this configuration. However, it is possible +# setup RSA to use ephemeral DH key exchange. In addition, ciphers with +# DSA keys always use ephemeral DH keys. This can be used to achieve +# forward secrecy. If the file is in DSA parameters format, it will be +# automatically converted into DH params. +# subject_match: Substring to be matched against the subject of the +# authentication server certificate. If this string is set, the server +# sertificate is only accepted if it contains this string in the subject. +# The subject string is in following format: +# /C=US/ST=CA/L=San Francisco/CN=Test AS/emailAddress=as@example.com +# altsubject_match: Semicolon separated string of entries to be matched against +# the alternative subject name of the authentication server certificate. +# If this string is set, the server sertificate is only accepted if it +# contains one of the entries in an alternative subject name extension. +# altSubjectName string is in following format: TYPE:VALUE +# Example: EMAIL:server@example.com +# Example: DNS:server.example.com;DNS:server2.example.com +# Following types are supported: EMAIL, DNS, URI +# phase1: Phase1 (outer authentication, i.e., TLS tunnel) parameters +# (string with field-value pairs, e.g., "peapver=0" or +# "peapver=1 peaplabel=1") +# 'peapver' can be used to force which PEAP version (0 or 1) is used. +# 'peaplabel=1' can be used to force new label, "client PEAP encryption", +# to be used during key derivation when PEAPv1 or newer. Most existing +# PEAPv1 implementation seem to be using the old label, "client EAP +# encryption", and wpa_supplicant is now using that as the default value. +# Some servers, e.g., Radiator, may require peaplabel=1 configuration to +# interoperate with PEAPv1; see eap_testing.txt for more details. +# 'peap_outer_success=0' can be used to terminate PEAP authentication on +# tunneled EAP-Success. This is required with some RADIUS servers that +# implement draft-josefsson-pppext-eap-tls-eap-05.txt (e.g., +# Lucent NavisRadius v4.4.0 with PEAP in "IETF Draft 5" mode) +# include_tls_length=1 can be used to force wpa_supplicant to include +# TLS Message Length field in all TLS messages even if they are not +# fragmented. +# sim_min_num_chal=3 can be used to configure EAP-SIM to require three +# challenges (by default, it accepts 2 or 3) +# result_ind=1 can be used to enable EAP-SIM and EAP-AKA to use +# protected result indication. +# 'crypto_binding' option can be used to control PEAPv0 cryptobinding +# behavior: +# * 0 = do not use cryptobinding (default) +# * 1 = use cryptobinding if server supports it +# * 2 = require cryptobinding +# EAP-WSC (WPS) uses following options: pin= or +# pbc=1. +# phase2: Phase2 (inner authentication with TLS tunnel) parameters +# (string with field-value pairs, e.g., "auth=MSCHAPV2" for EAP-PEAP or +# "autheap=MSCHAPV2 autheap=MD5" for EAP-TTLS) +# Following certificate/private key fields are used in inner Phase2 +# authentication when using EAP-TTLS or EAP-PEAP. +# ca_cert2: File path to CA certificate file. This file can have one or more +# trusted CA certificates. If ca_cert2 and ca_path2 are not included, +# server certificate will not be verified. This is insecure and a trusted +# CA certificate should always be configured. +# ca_path2: Directory path for CA certificate files (PEM) +# client_cert2: File path to client certificate file +# private_key2: File path to client private key file +# private_key2_passwd: Password for private key file +# dh_file2: File path to DH/DSA parameters file (in PEM format) +# subject_match2: Substring to be matched against the subject of the +# authentication server certificate. +# altsubject_match2: Substring to be matched against the alternative subject +# name of the authentication server certificate. +# +# fragment_size: Maximum EAP fragment size in bytes (default 1398). +# This value limits the fragment size for EAP methods that support +# fragmentation (e.g., EAP-TLS and EAP-PEAP). This value should be set +# small enough to make the EAP messages fit in MTU of the network +# interface used for EAPOL. The default value is suitable for most +# cases. +# +# EAP-FAST variables: +# pac_file: File path for the PAC entries. wpa_supplicant will need to be able +# to create this file and write updates to it when PAC is being +# provisioned or refreshed. Full path to the file should be used since +# working directory may change when wpa_supplicant is run in the +# background. Alternatively, a named configuration blob can be used by +# setting this to blob:// +# phase1: fast_provisioning option can be used to enable in-line provisioning +# of EAP-FAST credentials (PAC): +# 0 = disabled, +# 1 = allow unauthenticated provisioning, +# 2 = allow authenticated provisioning, +# 3 = allow both unauthenticated and authenticated provisioning +# fast_max_pac_list_len= option can be used to set the maximum +# number of PAC entries to store in a PAC list (default: 10) +# fast_pac_format=binary option can be used to select binary format for +# storing PAC entries in order to save some space (the default +# text format uses about 2.5 times the size of minimal binary +# format) +# +# wpa_supplicant supports number of "EAP workarounds" to work around +# interoperability issues with incorrectly behaving authentication servers. +# These are enabled by default because some of the issues are present in large +# number of authentication servers. Strict EAP conformance mode can be +# configured by disabling workarounds with eap_workaround=0. + +# Example blocks: + +# Simple case: WPA-PSK, PSK as an ASCII passphrase, allow all valid ciphers +network={ + ssid="simple" + psk="very secret passphrase" + priority=5 +} + +# Same as previous, but request SSID-specific scanning (for APs that reject +# broadcast SSID) +network={ + ssid="second ssid" + scan_ssid=1 + psk="very secret passphrase" + priority=2 +} + +# Only WPA-PSK is used. Any valid cipher combination is accepted. +network={ + ssid="example" + proto=WPA + key_mgmt=WPA-PSK + pairwise=CCMP TKIP + group=CCMP TKIP WEP104 WEP40 + psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb + priority=2 +} + +# WPA-Personal(PSK) with TKIP and enforcement for frequent PTK rekeying +network={ + ssid="example" + proto=WPA + key_mgmt=WPA-PSK + pairwise=TKIP + group=TKIP + psk="not so secure passphrase" + wpa_ptk_rekey=600 +} + +# Only WPA-EAP is used. Both CCMP and TKIP is accepted. An AP that used WEP104 +# or WEP40 as the group cipher will not be accepted. +network={ + ssid="example" + proto=RSN + key_mgmt=WPA-EAP + pairwise=CCMP TKIP + group=CCMP TKIP + eap=TLS + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + priority=1 +} + +# EAP-PEAP/MSCHAPv2 configuration for RADIUS servers that use the new peaplabel +# (e.g., Radiator) +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=PEAP + identity="user@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + phase1="peaplabel=1" + phase2="auth=MSCHAPV2" + priority=10 +} + +# EAP-TTLS/EAP-MD5-Challenge configuration with anonymous identity for the +# unencrypted use. Real identity is sent only within an encrypted TLS tunnel. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + priority=2 +} + +# EAP-TTLS/MSCHAPv2 configuration with anonymous identity for the unencrypted +# use. Real identity is sent only within an encrypted TLS tunnel. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + phase2="auth=MSCHAPV2" +} + +# WPA-EAP, EAP-TTLS with different CA certificate used for outer and inner +# authentication. +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + # Phase1 / outer authentication + anonymous_identity="anonymous@example.com" + ca_cert="/etc/cert/ca.pem" + # Phase 2 / inner authentication + phase2="autheap=TLS" + ca_cert2="/etc/cert/ca2.pem" + client_cert2="/etc/cer/user.pem" + private_key2="/etc/cer/user.prv" + private_key2_passwd="password" + priority=2 +} + +# Both WPA-PSK and WPA-EAP is accepted. Only CCMP is accepted as pairwise and +# group cipher. +network={ + ssid="example" + bssid=00:11:22:33:44:55 + proto=WPA RSN + key_mgmt=WPA-PSK WPA-EAP + pairwise=CCMP + group=CCMP + psk=06b4be19da289f475aa46a33cb793029d4ab3db7a23ee92382eb0106c72ac7bb +} + +# Special characters in SSID, so use hex string. Default to WPA-PSK, WPA-EAP +# and all valid ciphers. +network={ + ssid=00010203 + psk=000102030405060708090a0b0c0d0e0f101112131415161718191a1b1c1d1e1f +} + + +# EAP-SIM with a GSM SIM or USIM +network={ + ssid="eap-sim-test" + key_mgmt=WPA-EAP + eap=SIM + pin="1234" + pcsc="" +} + + +# EAP-PSK +network={ + ssid="eap-psk-test" + key_mgmt=WPA-EAP + eap=PSK + anonymous_identity="eap_psk_user" + password=06b4be19da289f475aa46a33cb793029 + identity="eap_psk_user@example.com" +} + + +# IEEE 802.1X/EAPOL with dynamically generated WEP keys (i.e., no WPA) using +# EAP-TLS for authentication and key generation; require both unicast and +# broadcast WEP keys. +network={ + ssid="1x-test" + key_mgmt=IEEE8021X + eap=TLS + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + eapol_flags=3 +} + + +# LEAP with dynamic WEP keys +network={ + ssid="leap-example" + key_mgmt=IEEE8021X + eap=LEAP + identity="user" + password="foobar" +} + +# EAP-IKEv2 using shared secrets for both server and peer authentication +network={ + ssid="ikev2-example" + key_mgmt=WPA-EAP + eap=IKEV2 + identity="user" + password="foobar" +} + +# EAP-FAST with WPA (WPA or WPA2) +network={ + ssid="eap-fast-test" + key_mgmt=WPA-EAP + eap=FAST + anonymous_identity="FAST-000102030405" + identity="username" + password="password" + phase1="fast_provisioning=1" + pac_file="/etc/wpa_supplicant.eap-fast-pac" +} + +network={ + ssid="eap-fast-test" + key_mgmt=WPA-EAP + eap=FAST + anonymous_identity="FAST-000102030405" + identity="username" + password="password" + phase1="fast_provisioning=1" + pac_file="blob://eap-fast-pac" +} + +# Plaintext connection (no WPA, no IEEE 802.1X) +network={ + ssid="plaintext-test" + key_mgmt=NONE +} + + +# Shared WEP key connection (no WPA, no IEEE 802.1X) +network={ + ssid="static-wep-test" + key_mgmt=NONE + wep_key0="abcde" + wep_key1=0102030405 + wep_key2="1234567890123" + wep_tx_keyidx=0 + priority=5 +} + + +# Shared WEP key connection (no WPA, no IEEE 802.1X) using Shared Key +# IEEE 802.11 authentication +network={ + ssid="static-wep-test2" + key_mgmt=NONE + wep_key0="abcde" + wep_key1=0102030405 + wep_key2="1234567890123" + wep_tx_keyidx=0 + priority=5 + auth_alg=SHARED +} + + +# IBSS/ad-hoc network with WPA-None/TKIP. +network={ + ssid="test adhoc" + mode=1 + frequency=2412 + proto=WPA + key_mgmt=WPA-NONE + pairwise=NONE + group=TKIP + psk="secret passphrase" +} + + +# Catch all example that allows more or less all configuration modes +network={ + ssid="example" + scan_ssid=1 + key_mgmt=WPA-EAP WPA-PSK IEEE8021X NONE + pairwise=CCMP TKIP + group=CCMP TKIP WEP104 WEP40 + psk="very secret passphrase" + eap=TTLS PEAP TLS + identity="user@example.com" + password="foobar" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + private_key="/etc/cert/user.prv" + private_key_passwd="password" + phase1="peaplabel=0" +} + +# Example of EAP-TLS with smartcard (openssl engine) +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TLS + proto=RSN + pairwise=CCMP TKIP + group=CCMP TKIP + identity="user@example.com" + ca_cert="/etc/cert/ca.pem" + client_cert="/etc/cert/user.pem" + + engine=1 + + # The engine configured here must be available. Look at + # OpenSSL engine support in the global section. + # The key available through the engine must be the private key + # matching the client certificate configured above. + + # use the opensc engine + #engine_id="opensc" + #key_id="45" + + # use the pkcs11 engine + engine_id="pkcs11" + key_id="id_45" + + # Optional PIN configuration; this can be left out and PIN will be + # asked through the control interface + pin="1234" +} + +# Example configuration showing how to use an inlined blob as a CA certificate +# data instead of using external file +network={ + ssid="example" + key_mgmt=WPA-EAP + eap=TTLS + identity="user@example.com" + anonymous_identity="anonymous@example.com" + password="foobar" + ca_cert="blob://exampleblob" + priority=20 +} + +blob-base64-exampleblob={ +SGVsbG8gV29ybGQhCg== +} + + +# Wildcard match for SSID (plaintext APs only). This example select any +# open AP regardless of its SSID. +network={ + key_mgmt=NONE +} diff --git a/wpa_supplicant/wpa_supplicant_conf.mk b/wpa_supplicant/wpa_supplicant_conf.mk new file mode 100644 index 0000000..f2c7126 --- /dev/null +++ b/wpa_supplicant/wpa_supplicant_conf.mk @@ -0,0 +1,43 @@ +# +# Copyright (C) 2010 The Android Open Source Project +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# Include this makefile to generate your hardware specific wpa_supplicant.conf +# Requires: WIFI_DRIVER_SOCKET_IFACE + +LOCAL_PATH := $(call my-dir) + +######################## +include $(CLEAR_VARS) + +LOCAL_MODULE := wpa_supplicant.conf +LOCAL_MODULE_CLASS := ETC +LOCAL_MODULE_TAGS := optional +LOCAL_MODULE_PATH := $(TARGET_OUT_ETC)/wifi + +include $(BUILD_SYSTEM)/base_rules.mk + +WPA_SUPPLICANT_CONF_TEMPLATE := $(LOCAL_PATH)/wpa_supplicant.conf +WPA_SUPPLICANT_CONF_SCRIPT := $(LOCAL_PATH)/wpa_supplicant_conf.sh +$(LOCAL_BUILT_MODULE): PRIVATE_WIFI_DRIVER_SOCKET_IFACE := $(WIFI_DRIVER_SOCKET_IFACE) +$(LOCAL_BUILT_MODULE): PRIVATE_WPA_SUPPLICANT_CONF_TEMPLATE := $(WPA_SUPPLICANT_CONF_TEMPLATE) +$(LOCAL_BUILT_MODULE): PRIVATE_WPA_SUPPLICANT_CONF_SCRIPT := $(WPA_SUPPLICANT_CONF_SCRIPT) +$(LOCAL_BUILT_MODULE) : $(WPA_SUPPLICANT_CONF_TEMPLATE) $(WPA_SUPPLICANT_CONF_SCRIPT) + @echo Target wpa_supplicant.conf: $@ + @mkdir -p $(dir $@) + $(hide) WIFI_DRIVER_SOCKET_IFACE="$(PRIVATE_WIFI_DRIVER_SOCKET_IFACE)" \ + bash $(PRIVATE_WPA_SUPPLICANT_CONF_SCRIPT) $(PRIVATE_WPA_SUPPLICANT_CONF_TEMPLATE) > $@ + +######################## diff --git a/wpa_supplicant/wpa_supplicant_conf.sh b/wpa_supplicant/wpa_supplicant_conf.sh new file mode 100755 index 0000000..ec5e92f --- /dev/null +++ b/wpa_supplicant/wpa_supplicant_conf.sh @@ -0,0 +1,25 @@ +#!/bin/bash +# +# Copyright (C) 2010 The Android Open Source Project +# +# Licensed under the Apache License, Version 2.0 (the "License"); +# you may not use this file except in compliance with the License. +# You may obtain a copy of the License at +# +# http://www.apache.org/licenses/LICENSE-2.0 +# +# Unless required by applicable law or agreed to in writing, software +# distributed under the License is distributed on an "AS IS" BASIS, +# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +# See the License for the specific language governing permissions and +# limitations under the License. +# + +# Generate a wpa_supplicant.conf from the template. +# $1: the template file name +if [ -n "$WIFI_DRIVER_SOCKET_IFACE" ] +then + sed -e 's/#.*$//' -e 's/[ \t]*$//' -e '/^$/d' < $1 | sed -e "s/wlan0/$WIFI_DRIVER_SOCKET_IFACE/" +else + sed -e 's/#.*$//' -e 's/[ \t]*$//' -e '/^$/d' < $1 +fi -- cgit v1.1