/*
 * wpa_supplicant - SME
 * Copyright (c) 2009-2010, Jouni Malinen <j@w1.fi>
 *
 * This software may be distributed under the terms of the BSD license.
 * See README for more details.
 */

#include "includes.h"

#include "common.h"
#include "utils/eloop.h"
#include "common/ieee802_11_defs.h"
#include "common/ieee802_11_common.h"
#include "eapol_supp/eapol_supp_sm.h"
#include "common/wpa_common.h"
#include "rsn_supp/wpa.h"
#include "rsn_supp/pmksa_cache.h"
#include "config.h"
#include "wpa_supplicant_i.h"
#include "driver_i.h"
#include "wpas_glue.h"
#include "wps_supplicant.h"
#include "p2p_supplicant.h"
#include "notify.h"
#include "bss.h"
#include "scan.h"
#include "sme.h"
#include "hs20_supplicant.h"

#define SME_AUTH_TIMEOUT 5
#define SME_ASSOC_TIMEOUT 5

static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx);
static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx);
static void sme_obss_scan_timeout(void *eloop_ctx, void *timeout_ctx);
#ifdef CONFIG_IEEE80211W
static void sme_stop_sa_query(struct wpa_supplicant *wpa_s);
#endif /* CONFIG_IEEE80211W */


void sme_authenticate(struct wpa_supplicant *wpa_s,
		      struct wpa_bss *bss, struct wpa_ssid *ssid)
{
	struct wpa_driver_auth_params params;
	struct wpa_ssid *old_ssid;
#ifdef CONFIG_IEEE80211R
	const u8 *ie;
#endif /* CONFIG_IEEE80211R */
#ifdef CONFIG_IEEE80211R
	const u8 *md = NULL;
#endif /* CONFIG_IEEE80211R */
	int i, bssid_changed;

	if (bss == NULL) {
		wpa_msg(wpa_s, MSG_ERROR, "SME: No scan result available for "
			"the network");
		return;
	}

	wpa_s->current_bss = bss;

	os_memset(&params, 0, sizeof(params));
	wpa_s->reassociate = 0;

	params.freq = bss->freq;
	params.bssid = bss->bssid;
	params.ssid = bss->ssid;
	params.ssid_len = bss->ssid_len;
	params.p2p = ssid->p2p_group;

	if (wpa_s->sme.ssid_len != params.ssid_len ||
	    os_memcmp(wpa_s->sme.ssid, params.ssid, params.ssid_len) != 0)
		wpa_s->sme.prev_bssid_set = 0;

	wpa_s->sme.freq = params.freq;
	os_memcpy(wpa_s->sme.ssid, params.ssid, params.ssid_len);
	wpa_s->sme.ssid_len = params.ssid_len;

	params.auth_alg = WPA_AUTH_ALG_OPEN;
#ifdef IEEE8021X_EAPOL
	if (ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA) {
		if (ssid->leap) {
			if (ssid->non_leap == 0)
				params.auth_alg = WPA_AUTH_ALG_LEAP;
			else
				params.auth_alg |= WPA_AUTH_ALG_LEAP;
		}
	}
#endif /* IEEE8021X_EAPOL */
	wpa_dbg(wpa_s, MSG_DEBUG, "Automatic auth_alg selection: 0x%x",
		params.auth_alg);
	if (ssid->auth_alg) {
		params.auth_alg = ssid->auth_alg;
		wpa_dbg(wpa_s, MSG_DEBUG, "Overriding auth_alg selection: "
			"0x%x", params.auth_alg);
	}

	for (i = 0; i < NUM_WEP_KEYS; i++) {
		if (ssid->wep_key_len[i])
			params.wep_key[i] = ssid->wep_key[i];
		params.wep_key_len[i] = ssid->wep_key_len[i];
	}
	params.wep_tx_keyidx = ssid->wep_tx_keyidx;

	bssid_changed = !is_zero_ether_addr(wpa_s->bssid);
	os_memset(wpa_s->bssid, 0, ETH_ALEN);
	os_memcpy(wpa_s->pending_bssid, bss->bssid, ETH_ALEN);
	if (bssid_changed)
		wpas_notify_bssid_changed(wpa_s);

	if ((wpa_bss_get_vendor_ie(bss, WPA_IE_VENDOR_TYPE) ||
	     wpa_bss_get_ie(bss, WLAN_EID_RSN)) &&
	    wpa_key_mgmt_wpa(ssid->key_mgmt)) {
		int try_opportunistic;
		try_opportunistic = ssid->proactive_key_caching &&
			(ssid->proto & WPA_PROTO_RSN);
		if (pmksa_cache_set_current(wpa_s->wpa, NULL, bss->bssid,
					    wpa_s->current_ssid,
					    try_opportunistic) == 0)
			eapol_sm_notify_pmkid_attempt(wpa_s->eapol, 1);
		wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
		if (wpa_supplicant_set_suites(wpa_s, bss, ssid,
					      wpa_s->sme.assoc_req_ie,
					      &wpa_s->sme.assoc_req_ie_len)) {
			wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
				"key management and encryption suites");
			return;
		}
	} else if ((ssid->key_mgmt & WPA_KEY_MGMT_IEEE8021X_NO_WPA) &&
		   wpa_key_mgmt_wpa_ieee8021x(ssid->key_mgmt)) {
		/*
		 * Both WPA and non-WPA IEEE 802.1X enabled in configuration -
		 * use non-WPA since the scan results did not indicate that the
		 * AP is using WPA or WPA2.
		 */
		wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
		wpa_s->sme.assoc_req_ie_len = 0;
	} else if (wpa_key_mgmt_wpa_any(ssid->key_mgmt)) {
		wpa_s->sme.assoc_req_ie_len = sizeof(wpa_s->sme.assoc_req_ie);
		if (wpa_supplicant_set_suites(wpa_s, NULL, ssid,
					      wpa_s->sme.assoc_req_ie,
					      &wpa_s->sme.assoc_req_ie_len)) {
			wpa_msg(wpa_s, MSG_WARNING, "SME: Failed to set WPA "
				"key management and encryption suites (no "
				"scan results)");
			return;
		}
#ifdef CONFIG_WPS
	} else if (ssid->key_mgmt & WPA_KEY_MGMT_WPS) {
		struct wpabuf *wps_ie;
		wps_ie = wps_build_assoc_req_ie(wpas_wps_get_req_type(ssid));
		if (wps_ie && wpabuf_len(wps_ie) <=
		    sizeof(wpa_s->sme.assoc_req_ie)) {
			wpa_s->sme.assoc_req_ie_len = wpabuf_len(wps_ie);
			os_memcpy(wpa_s->sme.assoc_req_ie, wpabuf_head(wps_ie),
				  wpa_s->sme.assoc_req_ie_len);
		} else
			wpa_s->sme.assoc_req_ie_len = 0;
		wpabuf_free(wps_ie);
		wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
#endif /* CONFIG_WPS */
	} else {
		wpa_supplicant_set_non_wpa_policy(wpa_s, ssid);
		wpa_s->sme.assoc_req_ie_len = 0;
	}

#ifdef CONFIG_IEEE80211R
	ie = wpa_bss_get_ie(bss, WLAN_EID_MOBILITY_DOMAIN);
	if (ie && ie[1] >= MOBILITY_DOMAIN_ID_LEN)
		md = ie + 2;
	wpa_sm_set_ft_params(wpa_s->wpa, ie, ie ? 2 + ie[1] : 0);
	if (md) {
		/* Prepare for the next transition */
		wpa_ft_prepare_auth_request(wpa_s->wpa, ie);
	}

	if (md && wpa_key_mgmt_ft(ssid->key_mgmt)) {
		if (wpa_s->sme.assoc_req_ie_len + 5 <
		    sizeof(wpa_s->sme.assoc_req_ie)) {
			struct rsn_mdie *mdie;
			u8 *pos = wpa_s->sme.assoc_req_ie +
				wpa_s->sme.assoc_req_ie_len;
			*pos++ = WLAN_EID_MOBILITY_DOMAIN;
			*pos++ = sizeof(*mdie);
			mdie = (struct rsn_mdie *) pos;
			os_memcpy(mdie->mobility_domain, md,
				  MOBILITY_DOMAIN_ID_LEN);
			mdie->ft_capab = md[MOBILITY_DOMAIN_ID_LEN];
			wpa_s->sme.assoc_req_ie_len += 5;
		}

		if (wpa_s->sme.ft_used &&
		    os_memcmp(md, wpa_s->sme.mobility_domain, 2) == 0 &&
		    wpa_sm_has_ptk(wpa_s->wpa)) {
			wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying to use FT "
				"over-the-air");
			params.auth_alg = WPA_AUTH_ALG_FT;
			params.ie = wpa_s->sme.ft_ies;
			params.ie_len = wpa_s->sme.ft_ies_len;
		}
	}
#endif /* CONFIG_IEEE80211R */

#ifdef CONFIG_IEEE80211W
	wpa_s->sme.mfp = ssid->ieee80211w;
	if (ssid->ieee80211w != NO_MGMT_FRAME_PROTECTION) {
		const u8 *rsn = wpa_bss_get_ie(bss, WLAN_EID_RSN);
		struct wpa_ie_data _ie;
		if (rsn && wpa_parse_wpa_ie(rsn, 2 + rsn[1], &_ie) == 0 &&
		    _ie.capabilities &
		    (WPA_CAPABILITY_MFPC | WPA_CAPABILITY_MFPR)) {
			wpa_dbg(wpa_s, MSG_DEBUG, "SME: Selected AP supports "
				"MFP: require MFP");
			wpa_s->sme.mfp = MGMT_FRAME_PROTECTION_REQUIRED;
		}
	}
#endif /* CONFIG_IEEE80211W */

#ifdef CONFIG_P2P
	if (wpa_s->global->p2p) {
		u8 *pos;
		size_t len;
		int res;
		pos = wpa_s->sme.assoc_req_ie + wpa_s->sme.assoc_req_ie_len;
		len = sizeof(wpa_s->sme.assoc_req_ie) -
			wpa_s->sme.assoc_req_ie_len;
		res = wpas_p2p_assoc_req_ie(wpa_s, bss, pos, len,
					    ssid->p2p_group);
		if (res >= 0)
			wpa_s->sme.assoc_req_ie_len += res;
	}
#endif /* CONFIG_P2P */

#ifdef CONFIG_HS20
	if (wpa_s->conf->hs20) {
		struct wpabuf *hs20;
		hs20 = wpabuf_alloc(20);
		if (hs20) {
			wpas_hs20_add_indication(hs20);
			os_memcpy(wpa_s->sme.assoc_req_ie +
				  wpa_s->sme.assoc_req_ie_len,
				  wpabuf_head(hs20), wpabuf_len(hs20));
			wpa_s->sme.assoc_req_ie_len += wpabuf_len(hs20);
			wpabuf_free(hs20);
		}
	}
#endif /* CONFIG_HS20 */

#ifdef CONFIG_INTERWORKING
	if (wpa_s->conf->interworking) {
		u8 *pos = wpa_s->sme.assoc_req_ie;
		if (wpa_s->sme.assoc_req_ie_len > 0 && pos[0] == WLAN_EID_RSN)
			pos += 2 + pos[1];
		os_memmove(pos + 6, pos,
			   wpa_s->sme.assoc_req_ie_len -
			   (pos - wpa_s->sme.assoc_req_ie));
		wpa_s->sme.assoc_req_ie_len += 6;
		*pos++ = WLAN_EID_EXT_CAPAB;
		*pos++ = 4;
		*pos++ = 0x00;
		*pos++ = 0x00;
		*pos++ = 0x00;
		*pos++ = 0x80; /* Bit 31 - Interworking */
	}
#endif /* CONFIG_INTERWORKING */

	wpa_supplicant_cancel_sched_scan(wpa_s);
	wpa_supplicant_cancel_scan(wpa_s);

	wpa_msg(wpa_s, MSG_INFO, "SME: Trying to authenticate with " MACSTR
		" (SSID='%s' freq=%d MHz)", MAC2STR(params.bssid),
		wpa_ssid_txt(params.ssid, params.ssid_len), params.freq);

	wpa_clear_keys(wpa_s, bss->bssid);
	wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
	old_ssid = wpa_s->current_ssid;
	wpa_s->current_ssid = ssid;
	wpa_supplicant_rsn_supp_set_config(wpa_s, wpa_s->current_ssid);
	wpa_supplicant_initiate_eapol(wpa_s);
	if (old_ssid != wpa_s->current_ssid)
		wpas_notify_network_changed(wpa_s);

	wpa_s->sme.auth_alg = params.auth_alg;
	if (wpa_drv_authenticate(wpa_s, &params) < 0) {
		wpa_msg(wpa_s, MSG_INFO, "SME: Authentication request to the "
			"driver failed");
		wpas_connection_failed(wpa_s, bss->bssid);
		wpa_supplicant_mark_disassoc(wpa_s);
		return;
	}

	eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
			       NULL);

	/*
	 * Association will be started based on the authentication event from
	 * the driver.
	 */
}


void sme_event_auth(struct wpa_supplicant *wpa_s, union wpa_event_data *data)
{
	struct wpa_ssid *ssid = wpa_s->current_ssid;

	if (ssid == NULL) {
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication event "
			"when network is not selected");
		return;
	}

	if (wpa_s->wpa_state != WPA_AUTHENTICATING) {
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication event "
			"when not in authenticating state");
		return;
	}

	if (os_memcmp(wpa_s->pending_bssid, data->auth.peer, ETH_ALEN) != 0) {
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: Ignore authentication with "
			"unexpected peer " MACSTR,
			MAC2STR(data->auth.peer));
		return;
	}

	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication response: peer=" MACSTR
		" auth_type=%d status_code=%d",
		MAC2STR(data->auth.peer), data->auth.auth_type,
		data->auth.status_code);
	wpa_hexdump(MSG_MSGDUMP, "SME: Authentication response IEs",
		    data->auth.ies, data->auth.ies_len);

	eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);

	if (data->auth.status_code != WLAN_STATUS_SUCCESS) {
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication failed (status "
			"code %d)", data->auth.status_code);

		if (data->auth.status_code !=
		    WLAN_STATUS_NOT_SUPPORTED_AUTH_ALG ||
		    wpa_s->sme.auth_alg == data->auth.auth_type ||
		    wpa_s->current_ssid->auth_alg == WPA_AUTH_ALG_LEAP) {
			wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
			wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
			return;
		}

		switch (data->auth.auth_type) {
		case WLAN_AUTH_OPEN:
			wpa_s->current_ssid->auth_alg = WPA_AUTH_ALG_SHARED;

			wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying SHARED auth");
			wpa_supplicant_associate(wpa_s, wpa_s->current_bss,
						 wpa_s->current_ssid);
			return;

		case WLAN_AUTH_SHARED_KEY:
			wpa_s->current_ssid->auth_alg = WPA_AUTH_ALG_LEAP;

			wpa_dbg(wpa_s, MSG_DEBUG, "SME: Trying LEAP auth");
			wpa_supplicant_associate(wpa_s, wpa_s->current_bss,
						 wpa_s->current_ssid);
			return;

		default:
			return;
		}
	}

#ifdef CONFIG_IEEE80211R
	if (data->auth.auth_type == WLAN_AUTH_FT) {
		union wpa_event_data edata;
		os_memset(&edata, 0, sizeof(edata));
		edata.ft_ies.ies = data->auth.ies;
		edata.ft_ies.ies_len = data->auth.ies_len;
		os_memcpy(edata.ft_ies.target_ap, data->auth.peer, ETH_ALEN);
		wpa_supplicant_event(wpa_s, EVENT_FT_RESPONSE, &edata);
	}
#endif /* CONFIG_IEEE80211R */

	sme_associate(wpa_s, ssid->mode, data->auth.peer,
		      data->auth.auth_type);
}


void sme_associate(struct wpa_supplicant *wpa_s, enum wpas_mode mode,
		   const u8 *bssid, u16 auth_type)
{
	struct wpa_driver_associate_params params;
	struct ieee802_11_elems elems;
#ifdef CONFIG_HT_OVERRIDES
	struct ieee80211_ht_capabilities htcaps;
	struct ieee80211_ht_capabilities htcaps_mask;
#endif /* CONFIG_HT_OVERRIDES */

	os_memset(&params, 0, sizeof(params));
	params.bssid = bssid;
	params.ssid = wpa_s->sme.ssid;
	params.ssid_len = wpa_s->sme.ssid_len;
	params.freq = wpa_s->sme.freq;
	params.bg_scan_period = wpa_s->current_ssid ?
		wpa_s->current_ssid->bg_scan_period : -1;
	params.wpa_ie = wpa_s->sme.assoc_req_ie_len ?
		wpa_s->sme.assoc_req_ie : NULL;
	params.wpa_ie_len = wpa_s->sme.assoc_req_ie_len;
	params.pairwise_suite = cipher_suite2driver(wpa_s->pairwise_cipher);
	params.group_suite = cipher_suite2driver(wpa_s->group_cipher);
#ifdef CONFIG_HT_OVERRIDES
	os_memset(&htcaps, 0, sizeof(htcaps));
	os_memset(&htcaps_mask, 0, sizeof(htcaps_mask));
	params.htcaps = (u8 *) &htcaps;
	params.htcaps_mask = (u8 *) &htcaps_mask;
	wpa_supplicant_apply_ht_overrides(wpa_s, wpa_s->current_ssid, &params);
#endif /* CONFIG_HT_OVERRIDES */
#ifdef CONFIG_IEEE80211R
	if (auth_type == WLAN_AUTH_FT && wpa_s->sme.ft_ies) {
		params.wpa_ie = wpa_s->sme.ft_ies;
		params.wpa_ie_len = wpa_s->sme.ft_ies_len;
	}
#endif /* CONFIG_IEEE80211R */
	params.mode = mode;
	params.mgmt_frame_protection = wpa_s->sme.mfp;
	if (wpa_s->sme.prev_bssid_set)
		params.prev_bssid = wpa_s->sme.prev_bssid;

	wpa_msg(wpa_s, MSG_INFO, "Trying to associate with " MACSTR
		" (SSID='%s' freq=%d MHz)", MAC2STR(params.bssid),
		params.ssid ? wpa_ssid_txt(params.ssid, params.ssid_len) : "",
		params.freq);

	wpa_supplicant_set_state(wpa_s, WPA_ASSOCIATING);

	if (params.wpa_ie == NULL ||
	    ieee802_11_parse_elems(params.wpa_ie, params.wpa_ie_len, &elems, 0)
	    < 0) {
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: Could not parse own IEs?!");
		os_memset(&elems, 0, sizeof(elems));
	}
	if (elems.rsn_ie) {
		params.wpa_proto = WPA_PROTO_RSN;
		wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.rsn_ie - 2,
					elems.rsn_ie_len + 2);
	} else if (elems.wpa_ie) {
		params.wpa_proto = WPA_PROTO_WPA;
		wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, elems.wpa_ie - 2,
					elems.wpa_ie_len + 2);
	} else
		wpa_sm_set_assoc_wpa_ie(wpa_s->wpa, NULL, 0);
	if (wpa_s->current_ssid && wpa_s->current_ssid->p2p_group)
		params.p2p = 1;

	if (wpa_s->parent->set_sta_uapsd)
		params.uapsd = wpa_s->parent->sta_uapsd;
	else
		params.uapsd = -1;

	if (wpa_drv_associate(wpa_s, &params) < 0) {
		wpa_msg(wpa_s, MSG_INFO, "SME: Association request to the "
			"driver failed");
		wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
		wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
		os_memset(wpa_s->pending_bssid, 0, ETH_ALEN);
		return;
	}

	eloop_register_timeout(SME_ASSOC_TIMEOUT, 0, sme_assoc_timer, wpa_s,
			       NULL);
}


int sme_update_ft_ies(struct wpa_supplicant *wpa_s, const u8 *md,
		      const u8 *ies, size_t ies_len)
{
	if (md == NULL || ies == NULL) {
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: Remove mobility domain");
		os_free(wpa_s->sme.ft_ies);
		wpa_s->sme.ft_ies = NULL;
		wpa_s->sme.ft_ies_len = 0;
		wpa_s->sme.ft_used = 0;
		return 0;
	}

	os_memcpy(wpa_s->sme.mobility_domain, md, MOBILITY_DOMAIN_ID_LEN);
	wpa_hexdump(MSG_DEBUG, "SME: FT IEs", ies, ies_len);
	os_free(wpa_s->sme.ft_ies);
	wpa_s->sme.ft_ies = os_malloc(ies_len);
	if (wpa_s->sme.ft_ies == NULL)
		return -1;
	os_memcpy(wpa_s->sme.ft_ies, ies, ies_len);
	wpa_s->sme.ft_ies_len = ies_len;
	return 0;
}


static void sme_deauth(struct wpa_supplicant *wpa_s)
{
	int bssid_changed;

	bssid_changed = !is_zero_ether_addr(wpa_s->bssid);

	if (wpa_drv_deauthenticate(wpa_s, wpa_s->pending_bssid,
				   WLAN_REASON_DEAUTH_LEAVING) < 0) {
		wpa_msg(wpa_s, MSG_INFO, "SME: Deauth request to the driver "
			"failed");
	}
	wpa_s->sme.prev_bssid_set = 0;

	wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
	wpa_supplicant_set_state(wpa_s, WPA_DISCONNECTED);
	os_memset(wpa_s->bssid, 0, ETH_ALEN);
	os_memset(wpa_s->pending_bssid, 0, ETH_ALEN);
	if (bssid_changed)
		wpas_notify_bssid_changed(wpa_s);
}


void sme_event_assoc_reject(struct wpa_supplicant *wpa_s,
			    union wpa_event_data *data)
{
	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association with " MACSTR " failed: "
		"status code %d", MAC2STR(wpa_s->pending_bssid),
		data->assoc_reject.status_code);

	eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);

	/*
	 * For now, unconditionally terminate the previous authentication. In
	 * theory, this should not be needed, but mac80211 gets quite confused
	 * if the authentication is left pending.. Some roaming cases might
	 * benefit from using the previous authentication, so this could be
	 * optimized in the future.
	 */
	sme_deauth(wpa_s);
}


void sme_event_auth_timed_out(struct wpa_supplicant *wpa_s,
			      union wpa_event_data *data)
{
	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Authentication timed out");
	wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
	wpa_supplicant_mark_disassoc(wpa_s);
}


void sme_event_assoc_timed_out(struct wpa_supplicant *wpa_s,
			       union wpa_event_data *data)
{
	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association timed out");
	wpas_connection_failed(wpa_s, wpa_s->pending_bssid);
	wpa_supplicant_mark_disassoc(wpa_s);
}


void sme_event_disassoc(struct wpa_supplicant *wpa_s,
			union wpa_event_data *data)
{
	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Disassociation event received");
	if (wpa_s->sme.prev_bssid_set) {
		/*
		 * cfg80211/mac80211 can get into somewhat confused state if
		 * the AP only disassociates us and leaves us in authenticated
		 * state. For now, force the state to be cleared to avoid
		 * confusing errors if we try to associate with the AP again.
		 */
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: Deauthenticate to clear "
			"driver state");
		wpa_drv_deauthenticate(wpa_s, wpa_s->sme.prev_bssid,
				       WLAN_REASON_DEAUTH_LEAVING);
	}
}


static void sme_auth_timer(void *eloop_ctx, void *timeout_ctx)
{
	struct wpa_supplicant *wpa_s = eloop_ctx;
	if (wpa_s->wpa_state == WPA_AUTHENTICATING) {
		wpa_msg(wpa_s, MSG_DEBUG, "SME: Authentication timeout");
		sme_deauth(wpa_s);
	}
}


static void sme_assoc_timer(void *eloop_ctx, void *timeout_ctx)
{
	struct wpa_supplicant *wpa_s = eloop_ctx;
	if (wpa_s->wpa_state == WPA_ASSOCIATING) {
		wpa_msg(wpa_s, MSG_DEBUG, "SME: Association timeout");
		sme_deauth(wpa_s);
	}
}


void sme_state_changed(struct wpa_supplicant *wpa_s)
{
	/* Make sure timers are cleaned up appropriately. */
	if (wpa_s->wpa_state != WPA_ASSOCIATING)
		eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
	if (wpa_s->wpa_state != WPA_AUTHENTICATING)
		eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
}


void sme_disassoc_while_authenticating(struct wpa_supplicant *wpa_s,
				       const u8 *prev_pending_bssid)
{
	/*
	 * mac80211-workaround to force deauth on failed auth cmd,
	 * requires us to remain in authenticating state to allow the
	 * second authentication attempt to be continued properly.
	 */
	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Allow pending authentication "
		"to proceed after disconnection event");
	wpa_supplicant_set_state(wpa_s, WPA_AUTHENTICATING);
	os_memcpy(wpa_s->pending_bssid, prev_pending_bssid, ETH_ALEN);

	/*
	 * Re-arm authentication timer in case auth fails for whatever reason.
	 */
	eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
	eloop_register_timeout(SME_AUTH_TIMEOUT, 0, sme_auth_timer, wpa_s,
			       NULL);
}


void sme_deinit(struct wpa_supplicant *wpa_s)
{
	os_free(wpa_s->sme.ft_ies);
	wpa_s->sme.ft_ies = NULL;
	wpa_s->sme.ft_ies_len = 0;
#ifdef CONFIG_IEEE80211W
	sme_stop_sa_query(wpa_s);
#endif /* CONFIG_IEEE80211W */

	eloop_cancel_timeout(sme_assoc_timer, wpa_s, NULL);
	eloop_cancel_timeout(sme_auth_timer, wpa_s, NULL);
	eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
}


static void sme_send_2040_bss_coex(struct wpa_supplicant *wpa_s,
				   const u8 *chan_list, u8 num_channels,
				   u8 num_intol)
{
	struct ieee80211_2040_bss_coex_ie *bc_ie;
	struct ieee80211_2040_intol_chan_report *ic_report;
	struct wpabuf *buf;

	wpa_printf(MSG_DEBUG, "SME: Send 20/40 BSS Coexistence to " MACSTR,
		   MAC2STR(wpa_s->bssid));

	buf = wpabuf_alloc(2 + /* action.category + action_code */
			   sizeof(struct ieee80211_2040_bss_coex_ie) +
			   sizeof(struct ieee80211_2040_intol_chan_report) +
			   num_channels);
	if (buf == NULL)
		return;

	wpabuf_put_u8(buf, WLAN_ACTION_PUBLIC);
	wpabuf_put_u8(buf, WLAN_PA_20_40_BSS_COEX);

	bc_ie = wpabuf_put(buf, sizeof(*bc_ie));
	bc_ie->element_id = WLAN_EID_20_40_BSS_COEXISTENCE;
	bc_ie->length = 1;
	if (num_intol)
		bc_ie->coex_param |= WLAN_20_40_BSS_COEX_20MHZ_WIDTH_REQ;

	if (num_channels > 0) {
		ic_report = wpabuf_put(buf, sizeof(*ic_report));
		ic_report->element_id = WLAN_EID_20_40_BSS_INTOLERANT;
		ic_report->length = num_channels + 1;
		ic_report->op_class = 0;
		os_memcpy(wpabuf_put(buf, num_channels), chan_list,
			  num_channels);
	}

	if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
				wpa_s->own_addr, wpa_s->bssid,
				wpabuf_head(buf), wpabuf_len(buf), 0) < 0) {
		wpa_msg(wpa_s, MSG_INFO,
			"SME: Failed to send 20/40 BSS Coexistence frame");
	}

	wpabuf_free(buf);
}


/**
 * enum wpas_band - Frequency band
 * @WPAS_BAND_2GHZ: 2.4 GHz ISM band
 * @WPAS_BAND_5GHZ: around 5 GHz band (4.9 - 5.7 GHz)
 */
enum wpas_band {
	WPAS_BAND_2GHZ,
	WPAS_BAND_5GHZ,
	WPAS_BAND_INVALID
};

/**
 * freq_to_channel - Convert frequency into channel info
 * @channel: Buffer for returning channel number
 * Returns: Band (2 or 5 GHz)
 */
static enum wpas_band freq_to_channel(int freq, u8 *channel)
{
	enum wpas_band band = (freq <= 2484) ? WPAS_BAND_2GHZ : WPAS_BAND_5GHZ;
	u8 chan = 0;

	if (freq >= 2412 && freq <= 2472)
		chan = (freq - 2407) / 5;
	else if (freq == 2484)
		chan = 14;
	else if (freq >= 5180 && freq <= 5805)
		chan = (freq - 5000) / 5;

	*channel = chan;
	return band;
}


int sme_proc_obss_scan(struct wpa_supplicant *wpa_s)
{
	struct wpa_bss *bss;
	const u8 *ie;
	u16 ht_cap;
	u8 chan_list[P2P_MAX_CHANNELS], channel;
	u8 num_channels = 0, num_intol = 0, i;

	if (!wpa_s->sme.sched_obss_scan)
		return 0;

	wpa_s->sme.sched_obss_scan = 0;
	if (!wpa_s->current_bss || wpa_s->wpa_state != WPA_COMPLETED)
		return 1;

	/*
	 * Check whether AP uses regulatory triplet or channel triplet in
	 * country info. Right now the operating class of the BSS channel
	 * width trigger event is "unknown" (IEEE Std 802.11-2012 10.15.12),
	 * based on the assumption that operating class triplet is not used in
	 * beacon frame. If the First Channel Number/Operating Extension
	 * Identifier octet has a positive integer value of 201 or greater,
	 * then its operating class triplet.
	 *
	 * TODO: If Supported Operating Classes element is present in beacon
	 * frame, have to lookup operating class in Annex E and fill them in
	 * 2040 coex frame.
	 */
	ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_COUNTRY);
	if (ie && (ie[1] >= 6) && (ie[5] >= 201))
		return 1;

	os_memset(chan_list, 0, sizeof(chan_list));

	dl_list_for_each(bss, &wpa_s->bss, struct wpa_bss, list) {
		/* Skip other band bss */
		if (freq_to_channel(bss->freq, &channel) != WPAS_BAND_2GHZ)
			continue;

		ie = wpa_bss_get_ie(bss, WLAN_EID_HT_CAP);
		ht_cap = (ie && (ie[1] == 26)) ? WPA_GET_LE16(ie + 2) : 0;

		if (!ht_cap || (ht_cap & HT_CAP_INFO_40MHZ_INTOLERANT)) {
			/* Check whether the channel is already considered */
			for (i = 0; i < num_channels; i++) {
				if (channel == chan_list[i])
					break;
			}
			if (i != num_channels)
				continue;

			if (ht_cap & HT_CAP_INFO_40MHZ_INTOLERANT)
				num_intol++;

			chan_list[num_channels++] = channel;
		}
	}

	sme_send_2040_bss_coex(wpa_s, chan_list, num_channels, num_intol);
	return 1;
}


static struct hostapd_hw_modes * get_mode(struct hostapd_hw_modes *modes,
					  u16 num_modes,
					  enum hostapd_hw_mode mode)
{
	u16 i;

	for (i = 0; i < num_modes; i++) {
		if (modes[i].mode == mode)
			return &modes[i];
	}

	return NULL;
}


static void wpa_setband_scan_freqs_list(struct wpa_supplicant *wpa_s,
					enum hostapd_hw_mode band,
					struct wpa_driver_scan_params *params)
{
	/* Include only supported channels for the specified band */
	struct hostapd_hw_modes *mode;
	int count, i;

	mode = get_mode(wpa_s->hw.modes, wpa_s->hw.num_modes, band);
	if (mode == NULL) {
		/* No channels supported in this band - use empty list */
		params->freqs = os_zalloc(sizeof(int));
		return;
	}

	params->freqs = os_calloc(mode->num_channels + 1, sizeof(int));
	if (params->freqs == NULL)
		return;
	for (count = 0, i = 0; i < mode->num_channels; i++) {
		if (mode->channels[i].flag & HOSTAPD_CHAN_DISABLED)
			continue;
		params->freqs[count++] = mode->channels[i].freq;
	}
}


static void sme_obss_scan_timeout(void *eloop_ctx, void *timeout_ctx)
{
	struct wpa_supplicant *wpa_s = eloop_ctx;
	struct wpa_driver_scan_params params;

	if (!wpa_s->current_bss) {
		wpa_printf(MSG_DEBUG, "SME OBSS: Ignore scan request");
		return;
	}

	os_memset(&params, 0, sizeof(params));
	wpa_setband_scan_freqs_list(wpa_s, HOSTAPD_MODE_IEEE80211G, &params);
	wpa_printf(MSG_DEBUG, "SME OBSS: Request an OBSS scan");

	if (wpa_supplicant_trigger_scan(wpa_s, &params))
		wpa_printf(MSG_DEBUG, "SME OBSS: Failed to trigger scan");
	else
		wpa_s->sme.sched_obss_scan = 1;
	os_free(params.freqs);

	eloop_register_timeout(wpa_s->sme.obss_scan_int, 0,
			       sme_obss_scan_timeout, wpa_s, NULL);
}


void sme_sched_obss_scan(struct wpa_supplicant *wpa_s, int enable)
{
	const u8 *ie;
	struct wpa_bss *bss = wpa_s->current_bss;
	struct wpa_ssid *ssid = wpa_s->current_ssid;
	struct hostapd_hw_modes *hw_mode = NULL;
	int i;

	eloop_cancel_timeout(sme_obss_scan_timeout, wpa_s, NULL);
	wpa_s->sme.sched_obss_scan = 0;
	if (!enable)
		return;

	if (!(wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME) || ssid == NULL ||
	    ssid->mode != IEEE80211_MODE_INFRA)
		return; /* Not using station SME in wpa_supplicant */

	if (!wpa_s->hw.modes)
		return;

	/* only HT caps in 11g mode are relevant */
	for (i = 0; i < wpa_s->hw.num_modes; i++) {
		hw_mode = &wpa_s->hw.modes[i];
		if (hw_mode->mode == HOSTAPD_MODE_IEEE80211G)
			break;
	}

	/* Driver does not support HT40 for 11g or doesn't have 11g. */
	if (i == wpa_s->hw.num_modes || !hw_mode ||
	    !(hw_mode->ht_capab & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
		return;

	if (bss == NULL || bss->freq < 2400 || bss->freq > 2500)
		return; /* Not associated on 2.4 GHz band */

	/* Check whether AP supports HT40 */
	ie = wpa_bss_get_ie(wpa_s->current_bss, WLAN_EID_HT_CAP);
	if (!ie || ie[1] < 2 ||
	    !(WPA_GET_LE16(ie + 2) & HT_CAP_INFO_SUPP_CHANNEL_WIDTH_SET))
		return; /* AP does not support HT40 */

	ie = wpa_bss_get_ie(wpa_s->current_bss,
			    WLAN_EID_OVERLAPPING_BSS_SCAN_PARAMS);
	if (!ie || ie[1] < 14)
		return; /* AP does not request OBSS scans */

	wpa_s->sme.obss_scan_int = WPA_GET_LE16(ie + 6);
	if (wpa_s->sme.obss_scan_int < 10) {
		wpa_printf(MSG_DEBUG, "SME: Invalid OBSS Scan Interval %u "
			   "replaced with the minimum 10 sec",
			   wpa_s->sme.obss_scan_int);
		wpa_s->sme.obss_scan_int = 10;
	}
	wpa_printf(MSG_DEBUG, "SME: OBSS Scan Interval %u sec",
		   wpa_s->sme.obss_scan_int);
	eloop_register_timeout(wpa_s->sme.obss_scan_int, 0,
			       sme_obss_scan_timeout, wpa_s, NULL);
}


#ifdef CONFIG_IEEE80211W

static const unsigned int sa_query_max_timeout = 1000;
static const unsigned int sa_query_retry_timeout = 201;

static int sme_check_sa_query_timeout(struct wpa_supplicant *wpa_s)
{
	u32 tu;
	struct os_time now, passed;
	os_get_time(&now);
	os_time_sub(&now, &wpa_s->sme.sa_query_start, &passed);
	tu = (passed.sec * 1000000 + passed.usec) / 1024;
	if (sa_query_max_timeout < tu) {
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: SA Query timed out");
		sme_stop_sa_query(wpa_s);
		wpa_supplicant_deauthenticate(
			wpa_s, WLAN_REASON_PREV_AUTH_NOT_VALID);
		return 1;
	}

	return 0;
}


static void sme_send_sa_query_req(struct wpa_supplicant *wpa_s,
				  const u8 *trans_id)
{
	u8 req[2 + WLAN_SA_QUERY_TR_ID_LEN];
	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Sending SA Query Request to "
		MACSTR, MAC2STR(wpa_s->bssid));
	wpa_hexdump(MSG_DEBUG, "SME: SA Query Transaction ID",
		    trans_id, WLAN_SA_QUERY_TR_ID_LEN);
	req[0] = WLAN_ACTION_SA_QUERY;
	req[1] = WLAN_SA_QUERY_REQUEST;
	os_memcpy(req + 2, trans_id, WLAN_SA_QUERY_TR_ID_LEN);
	if (wpa_drv_send_action(wpa_s, wpa_s->assoc_freq, 0, wpa_s->bssid,
				wpa_s->own_addr, wpa_s->bssid,
				req, sizeof(req), 0) < 0)
		wpa_msg(wpa_s, MSG_INFO, "SME: Failed to send SA Query "
			"Request");
}


static void sme_sa_query_timer(void *eloop_ctx, void *timeout_ctx)
{
	struct wpa_supplicant *wpa_s = eloop_ctx;
	unsigned int timeout, sec, usec;
	u8 *trans_id, *nbuf;

	if (wpa_s->sme.sa_query_count > 0 &&
	    sme_check_sa_query_timeout(wpa_s))
		return;

	nbuf = os_realloc_array(wpa_s->sme.sa_query_trans_id,
				wpa_s->sme.sa_query_count + 1,
				WLAN_SA_QUERY_TR_ID_LEN);
	if (nbuf == NULL)
		return;
	if (wpa_s->sme.sa_query_count == 0) {
		/* Starting a new SA Query procedure */
		os_get_time(&wpa_s->sme.sa_query_start);
	}
	trans_id = nbuf + wpa_s->sme.sa_query_count * WLAN_SA_QUERY_TR_ID_LEN;
	wpa_s->sme.sa_query_trans_id = nbuf;
	wpa_s->sme.sa_query_count++;

	os_get_random(trans_id, WLAN_SA_QUERY_TR_ID_LEN);

	timeout = sa_query_retry_timeout;
	sec = ((timeout / 1000) * 1024) / 1000;
	usec = (timeout % 1000) * 1024;
	eloop_register_timeout(sec, usec, sme_sa_query_timer, wpa_s, NULL);

	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Association SA Query attempt %d",
		wpa_s->sme.sa_query_count);

	sme_send_sa_query_req(wpa_s, trans_id);
}


static void sme_start_sa_query(struct wpa_supplicant *wpa_s)
{
	sme_sa_query_timer(wpa_s, NULL);
}


static void sme_stop_sa_query(struct wpa_supplicant *wpa_s)
{
	eloop_cancel_timeout(sme_sa_query_timer, wpa_s, NULL);
	os_free(wpa_s->sme.sa_query_trans_id);
	wpa_s->sme.sa_query_trans_id = NULL;
	wpa_s->sme.sa_query_count = 0;
}


void sme_event_unprot_disconnect(struct wpa_supplicant *wpa_s, const u8 *sa,
				 const u8 *da, u16 reason_code)
{
	struct wpa_ssid *ssid;

	if (!(wpa_s->drv_flags & WPA_DRIVER_FLAGS_SME))
		return;
	if (wpa_s->wpa_state != WPA_COMPLETED)
		return;
	ssid = wpa_s->current_ssid;
	if (ssid == NULL || ssid->ieee80211w == 0)
		return;
	if (os_memcmp(sa, wpa_s->bssid, ETH_ALEN) != 0)
		return;
	if (reason_code != WLAN_REASON_CLASS2_FRAME_FROM_NONAUTH_STA &&
	    reason_code != WLAN_REASON_CLASS3_FRAME_FROM_NONASSOC_STA)
		return;
	if (wpa_s->sme.sa_query_count > 0)
		return;

	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Unprotected disconnect dropped - "
		"possible AP/STA state mismatch - trigger SA Query");
	sme_start_sa_query(wpa_s);
}


void sme_sa_query_rx(struct wpa_supplicant *wpa_s, const u8 *sa,
		     const u8 *data, size_t len)
{
	int i;

	if (wpa_s->sme.sa_query_trans_id == NULL ||
	    len < 1 + WLAN_SA_QUERY_TR_ID_LEN ||
	    data[0] != WLAN_SA_QUERY_RESPONSE)
		return;
	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Received SA Query response from "
		MACSTR " (trans_id %02x%02x)", MAC2STR(sa), data[1], data[2]);

	if (os_memcmp(sa, wpa_s->bssid, ETH_ALEN) != 0)
		return;

	for (i = 0; i < wpa_s->sme.sa_query_count; i++) {
		if (os_memcmp(wpa_s->sme.sa_query_trans_id +
			      i * WLAN_SA_QUERY_TR_ID_LEN,
			      data + 1, WLAN_SA_QUERY_TR_ID_LEN) == 0)
			break;
	}

	if (i >= wpa_s->sme.sa_query_count) {
		wpa_dbg(wpa_s, MSG_DEBUG, "SME: No matching SA Query "
			"transaction identifier found");
		return;
	}

	wpa_dbg(wpa_s, MSG_DEBUG, "SME: Reply to pending SA Query received "
		"from " MACSTR, MAC2STR(sa));
	sme_stop_sa_query(wpa_s);
}

#endif /* CONFIG_IEEE80211W */