diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/mips/pci/pci.README | |
download | kernel_i9300_mainline-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_i9300_mainline-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_i9300_mainline-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/mips/pci/pci.README')
-rw-r--r-- | Documentation/mips/pci/pci.README | 54 |
1 files changed, 54 insertions, 0 deletions
diff --git a/Documentation/mips/pci/pci.README b/Documentation/mips/pci/pci.README new file mode 100644 index 0000000..8697ee4 --- /dev/null +++ b/Documentation/mips/pci/pci.README @@ -0,0 +1,54 @@ + +Pete Popov, ppopov@pacbell.net +07/11/2001 + +This README briefly explains how to use the pci and pci_auto +code in arch/mips/kernel. The code was ported from PowerPC and +modified slightly. It has been tested pretty well on PPC on some +rather complex systems with multiple bridges and devices behind +each bridge. However, at the time this README was written, the +mips port was tested only on boards with a single pci bus and +no P2P bridges. It's very possible that on boards with P2P +bridges some modifications have to be made. The code will +evolve, no doubt, but currently every single mips board +is doing its own pcibios thing and it has become a big +mess. This generic pci code is meant to clean up the mips +pci mess and make it easier to add pci support to new boards. + +inside the define for your board in arch/mips/config.in. +For example, the Galileo EV96100 board looks like this: + +if [ "$CONFIG_MIPS_EV96100" = "y" ]; then + define_bool CONFIG_PCI y + define_bool CONFIG_MIPS_GT96100 y + define_bool CONFIG_NEW_PCI y + define_bool CONFIG_SWAP_IO_SPACE y +fi + + +Next, if you want to use the arch/mips/kernel/pci code, which has the +pcibios_init() function, add + +define_bool CONFIG_NEW_PCI y + +inside the define for your board. Again, the EV96100 example above +show NEW_PCI turned on. + + +Now you need to add your files to hook in your pci configuration +cycles. Usually you'll need only a couple of files named something +like pci_fixups.c and pci_ops.c. You can copy the templates +provided and fill in the code. + +The file pci_ops.c should contain the pci configuration cycles routines. +It also has the mips_pci_channels[] array which contains the descriptors +of each pci controller. + +The file pci_fixups.c contains a few routines to do interrupt fixups, +resources fixups, and, if needed, pci bios fixups. + +Usually you'll put your pci_fixups.c file in your board specific directory, +since the functions in that file are board specific. The functions in +pci_ops.c, on the other hand, are usually pci controller specific so that +file could be shared among a few different boards using the same +pci controller. |