diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /Documentation/networking/cs89x0.txt | |
download | kernel_i9300_mainline-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_i9300_mainline-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_i9300_mainline-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2v2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'Documentation/networking/cs89x0.txt')
-rw-r--r-- | Documentation/networking/cs89x0.txt | 703 |
1 files changed, 703 insertions, 0 deletions
diff --git a/Documentation/networking/cs89x0.txt b/Documentation/networking/cs89x0.txt new file mode 100644 index 0000000..188beb7 --- /dev/null +++ b/Documentation/networking/cs89x0.txt @@ -0,0 +1,703 @@ + +NOTE +---- + +This document was contributed by Cirrus Logic for kernel 2.2.5. This version +has been updated for 2.3.48 by Andrew Morton <andrewm@uow.edu.au> + +Cirrus make a copy of this driver available at their website, as +described below. In general, you should use the driver version which +comes with your Linux distribution. + + + +CIRRUS LOGIC LAN CS8900/CS8920 ETHERNET ADAPTERS +Linux Network Interface Driver ver. 2.00 <kernel 2.3.48> +=============================================================================== + + +TABLE OF CONTENTS + +1.0 CIRRUS LOGIC LAN CS8900/CS8920 ETHERNET ADAPTERS + 1.1 Product Overview + 1.2 Driver Description + 1.2.1 Driver Name + 1.2.2 File in the Driver Package + 1.3 System Requirements + 1.4 Licensing Information + +2.0 ADAPTER INSTALLATION and CONFIGURATION + 2.1 CS8900-based Adapter Configuration + 2.2 CS8920-based Adapter Configuration + +3.0 LOADING THE DRIVER AS A MODULE + +4.0 COMPILING THE DRIVER + 4.1 Compiling the Driver as a Loadable Module + 4.2 Compiling the driver to support memory mode + 4.3 Compiling the driver to support Rx DMA + 4.4 Compiling the Driver into the Kernel + +5.0 TESTING AND TROUBLESHOOTING + 5.1 Known Defects and Limitations + 5.2 Testing the Adapter + 5.2.1 Diagnostic Self-Test + 5.2.2 Diagnostic Network Test + 5.3 Using the Adapter's LEDs + 5.4 Resolving I/O Conflicts + +6.0 TECHNICAL SUPPORT + 6.1 Contacting Cirrus Logic's Technical Support + 6.2 Information Required Before Contacting Technical Support + 6.3 Obtaining the Latest Driver Version + 6.4 Current maintainer + 6.5 Kernel boot parameters + + +1.0 CIRRUS LOGIC LAN CS8900/CS8920 ETHERNET ADAPTERS +=============================================================================== + + +1.1 PRODUCT OVERVIEW + +The CS8900-based ISA Ethernet Adapters from Cirrus Logic follow +IEEE 802.3 standards and support half or full-duplex operation in ISA bus +computers on 10 Mbps Ethernet networks. The adapters are designed for operation +in 16-bit ISA or EISA bus expansion slots and are available in +10BaseT-only or 3-media configurations (10BaseT, 10Base2, and AUI for 10Base-5 +or fiber networks). + +CS8920-based adapters are similar to the CS8900-based adapter with additional +features for Plug and Play (PnP) support and Wakeup Frame recognition. As +such, the configuration procedures differ somewhat between the two types of +adapters. Refer to the "Adapter Configuration" section for details on +configuring both types of adapters. + + +1.2 DRIVER DESCRIPTION + +The CS8900/CS8920 Ethernet Adapter driver for Linux supports the Linux +v2.3.48 or greater kernel. It can be compiled directly into the kernel +or loaded at run-time as a device driver module. + +1.2.1 Driver Name: cs89x0 + +1.2.2 Files in the Driver Archive: + +The files in the driver at Cirrus' website include: + + readme.txt - this file + build - batch file to compile cs89x0.c. + cs89x0.c - driver C code + cs89x0.h - driver header file + cs89x0.o - pre-compiled module (for v2.2.5 kernel) + config/Config.in - sample file to include cs89x0 driver in the kernel. + config/Makefile - sample file to include cs89x0 driver in the kernel. + config/Space.c - sample file to include cs89x0 driver in the kernel. + + + +1.3 SYSTEM REQUIREMENTS + +The following hardware is required: + + * Cirrus Logic LAN (CS8900/20-based) Ethernet ISA Adapter + + * IBM or IBM-compatible PC with: + * An 80386 or higher processor + * 16 bytes of contiguous IO space available between 210h - 370h + * One available IRQ (5,10,11,or 12 for the CS8900, 3-7,9-15 for CS8920). + + * Appropriate cable (and connector for AUI, 10BASE-2) for your network + topology. + +The following software is required: + +* LINUX kernel version 2.3.48 or higher + + * CS8900/20 Setup Utility (DOS-based) + + * LINUX kernel sources for your kernel (if compiling into kernel) + + * GNU Toolkit (gcc and make) v2.6 or above (if compiling into kernel + or a module) + + + +1.4 LICENSING INFORMATION + +This program is free software; you can redistribute it and/or modify it under +the terms of the GNU General Public License as published by the Free Software +Foundation, version 1. + +This program is distributed in the hope that it will be useful, but WITHOUT +ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or +FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for +more details. + +For a full copy of the GNU General Public License, write to the Free Software +Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + + + +2.0 ADAPTER INSTALLATION and CONFIGURATION +=============================================================================== + +Both the CS8900 and CS8920-based adapters can be configured using parameters +stored in an on-board EEPROM. You must use the DOS-based CS8900/20 Setup +Utility if you want to change the adapter's configuration in EEPROM. + +When loading the driver as a module, you can specify many of the adapter's +configuration parameters on the command-line to override the EEPROM's settings +or for interface configuration when an EEPROM is not used. (CS8920-based +adapters must use an EEPROM.) See Section 3.0 LOADING THE DRIVER AS A MODULE. + +Since the CS8900/20 Setup Utility is a DOS-based application, you must install +and configure the adapter in a DOS-based system using the CS8900/20 Setup +Utility before installation in the target LINUX system. (Not required if +installing a CS8900-based adapter and the default configuration is acceptable.) + + +2.1 CS8900-BASED ADAPTER CONFIGURATION + +CS8900-based adapters shipped from Cirrus Logic have been configured +with the following "default" settings: + + Operation Mode: Memory Mode + IRQ: 10 + Base I/O Address: 300 + Memory Base Address: D0000 + Optimization: DOS Client + Transmission Mode: Half-duplex + BootProm: None + Media Type: Autodetect (3-media cards) or + 10BASE-T (10BASE-T only adapter) + +You should only change the default configuration settings if conflicts with +another adapter exists. To change the adapter's configuration, run the +CS8900/20 Setup Utility. + + +2.2 CS8920-BASED ADAPTER CONFIGURATION + +CS8920-based adapters are shipped from Cirrus Logic configured as Plug +and Play (PnP) enabled. However, since the cs89x0 driver does NOT +support PnP, you must install the CS8920 adapter in a DOS-based PC and +run the CS8900/20 Setup Utility to disable PnP and configure the +adapter before installation in the target Linux system. Failure to do +this will leave the adapter inactive and the driver will be unable to +communicate with the adapter. + + + **************************************************************** + * CS8920-BASED ADAPTERS: * + * * + * CS8920-BASED ADAPTERS ARE PLUG and PLAY ENABLED BY DEFAULT. * + * THE CS89X0 DRIVER DOES NOT SUPPORT PnP. THEREFORE, YOU MUST * + * RUN THE CS8900/20 SETUP UTILITY TO DISABLE PnP SUPPORT AND * + * TO ACTIVATE THE ADAPTER. * + **************************************************************** + + + + +3.0 LOADING THE DRIVER AS A MODULE +=============================================================================== + +If the driver is compiled as a loadable module, you can load the driver module +with the 'modprobe' command. Many of the adapter's configuration parameters can +be specified as command-line arguments to the load command. This facility +provides a means to override the EEPROM's settings or for interface +configuration when an EEPROM is not used. + +Example: + + insmod cs89x0.o io=0x200 irq=0xA media=aui + +This example loads the module and configures the adapter to use an IO port base +address of 200h, interrupt 10, and use the AUI media connection. The following +configuration options are available on the command line: + +* io=### - specify IO address (200h-360h) +* irq=## - specify interrupt level +* use_dma=1 - Enable DMA +* dma=# - specify dma channel (Driver is compiled to support + Rx DMA only) +* dmasize=# (16 or 64) - DMA size 16K or 64K. Default value is set to 16. +* media=rj45 - specify media type + or media=bnc + or media=aui + or medai=auto +* duplex=full - specify forced half/full/autonegotiate duplex + or duplex=half + or duplex=auto +* debug=# - debug level (only available if the driver was compiled + for debugging) + +NOTES: + +a) If an EEPROM is present, any specified command-line parameter + will override the corresponding configuration value stored in + EEPROM. + +b) The "io" parameter must be specified on the command-line. + +c) The driver's hardware probe routine is designed to avoid + writing to I/O space until it knows that there is a cs89x0 + card at the written addresses. This could cause problems + with device probing. To avoid this behaviour, add one + to the `io=' module parameter. This doesn't actually change + the I/O address, but it is a flag to tell the driver + topartially initialise the hardware before trying to + identify the card. This could be dangerous if you are + not sure that there is a cs89x0 card at the provided address. + + For example, to scan for an adapter located at IO base 0x300, + specify an IO address of 0x301. + +d) The "duplex=auto" parameter is only supported for the CS8920. + +e) The minimum command-line configuration required if an EEPROM is + not present is: + + io + irq + media type (no autodetect) + +f) The following additional parameters are CS89XX defaults (values + used with no EEPROM or command-line argument). + + * DMA Burst = enabled + * IOCHRDY Enabled = enabled + * UseSA = enabled + * CS8900 defaults to half-duplex if not specified on command-line + * CS8920 defaults to autoneg if not specified on command-line + * Use reset defaults for other config parameters + * dma_mode = 0 + +g) You can use ifconfig to set the adapter's Ethernet address. + +h) Many Linux distributions use the 'modprobe' command to load + modules. This program uses the '/etc/conf.modules' file to + determine configuration information which is passed to a driver + module when it is loaded. All the configuration options which are + described above may be placed within /etc/conf.modules. + + For example: + + > cat /etc/conf.modules + ... + alias eth0 cs89x0 + options cs89x0 io=0x0200 dma=5 use_dma=1 + ... + + In this example we are telling the module system that the + ethernet driver for this machine should use the cs89x0 driver. We + are asking 'modprobe' to pass the 'io', 'dma' and 'use_dma' + arguments to the driver when it is loaded. + +i) Cirrus recommend that the cs89x0 use the ISA DMA channels 5, 6 or + 7. You will probably find that other DMA channels will not work. + +j) The cs89x0 supports DMA for receiving only. DMA mode is + significantly more efficient. Flooding a 400 MHz Celeron machine + with large ping packets consumes 82% of its CPU capacity in non-DMA + mode. With DMA this is reduced to 45%. + +k) If your Linux kernel was compiled with inbuilt plug-and-play + support you will be able to find information about the cs89x0 card + with the command + + cat /proc/isapnp + +l) If during DMA operation you find erratic behavior or network data + corruption you should use your PC's BIOS to slow the EISA bus clock. + +m) If the cs89x0 driver is compiled directly into the kernel + (non-modular) then its I/O address is automatically determined by + ISA bus probing. The IRQ number, media options, etc are determined + from the card's EEPROM. + +n) If the cs89x0 driver is compiled directly into the kernel, DMA + mode may be selected by providing the kernel with a boot option + 'cs89x0_dma=N' where 'N' is the desired DMA channel number (5, 6 or 7). + + Kernel boot options may be provided on the LILO command line: + + LILO boot: linux cs89x0_dma=5 + + or they may be placed in /etc/lilo.conf: + + image=/boot/bzImage-2.3.48 + append="cs89x0_dma=5" + label=linux + root=/dev/hda5 + read-only + + The DMA Rx buffer size is hardwired to 16 kbytes in this mode. + (64k mode is not available). + + +4.0 COMPILING THE DRIVER +=============================================================================== + +The cs89x0 driver can be compiled directly into the kernel or compiled into +a loadable device driver module. + + +4.1 COMPILING THE DRIVER AS A LOADABLE MODULE + +To compile the driver into a loadable module, use the following command +(single command line, without quotes): + +"gcc -D__KERNEL__ -I/usr/src/linux/include -I/usr/src/linux/net/inet -Wall +-Wstrict-prototypes -O2 -fomit-frame-pointer -DMODULE -DCONFIG_MODVERSIONS +-c cs89x0.c" + +4.2 COMPILING THE DRIVER TO SUPPORT MEMORY MODE + +Support for memory mode was not carried over into the 2.3 series kernels. + +4.3 COMPILING THE DRIVER TO SUPPORT Rx DMA + +The compile-time optionality for DMA was removed in the 2.3 kernel +series. DMA support is now unconditionally part of the driver. It is +enabled by the 'use_dma=1' module option. + +4.4 COMPILING THE DRIVER INTO THE KERNEL + +If your Linux distribution already has support for the cs89x0 driver +then simply copy the source file to the /usr/src/linux/drivers/net +directory to replace the original ones and run the make utility to +rebuild the kernel. See Step 3 for rebuilding the kernel. + +If your Linux does not include the cs89x0 driver, you need to edit three +configuration files, copy the source file to the /usr/src/linux/drivers/net +directory, and then run the make utility to rebuild the kernel. + +1. Edit the following configuration files by adding the statements as +indicated. (When possible, try to locate the added text to the section of the +file containing similar statements). + + +a.) In /usr/src/linux/drivers/net/Config.in, add: + +tristate 'CS89x0 support' CONFIG_CS89x0 + +Example: + + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I + fi + + tristate 'CS89x0 support' CONFIG_CS89x0 + + tristate 'NE2000/NE1000 support' CONFIG_NE2000 + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'NI5210 support' CONFIG_NI52 + + +b.) In /usr/src/linux/drivers/net/Makefile, add the following lines: + +ifeq ($(CONFIG_CS89x0),y) +L_OBJS += cs89x0.o +else + ifeq ($(CONFIG_CS89x0),m) + M_OBJS += cs89x0.o + endif +endif + + +c.) In /linux/drivers/net/Space.c file, add the line: + +extern int cs89x0_probe(struct device *dev); + + +Example: + + extern int ultra_probe(struct device *dev); + extern int wd_probe(struct device *dev); + extern int el2_probe(struct device *dev); + + extern int cs89x0_probe(struct device *dev); + + extern int ne_probe(struct device *dev); + extern int hp_probe(struct device *dev); + extern int hp_plus_probe(struct device *dev); + + +Also add: + + #ifdef CONFIG_CS89x0 + { cs89x0_probe,0 }, + #endif + + +2.) Copy the driver source files (cs89x0.c and cs89x0.h) +into the /usr/src/linux/drivers/net directory. + + +3.) Go to /usr/src/linux directory and run 'make config' followed by 'make' +(or make bzImage) to rebuild the kernel. + +4.) Use the DOS 'setup' utility to disable plug and play on the NIC. + + +5.0 TESTING AND TROUBLESHOOTING +=============================================================================== + +5.1 KNOWN DEFECTS and LIMITATIONS + +Refer to the RELEASE.TXT file distributed as part of this archive for a list of +known defects, driver limitations, and work arounds. + + +5.2 TESTING THE ADAPTER + +Once the adapter has been installed and configured, the diagnostic option of +the CS8900/20 Setup Utility can be used to test the functionality of the +adapter and its network connection. Use the diagnostics 'Self Test' option to +test the functionality of the adapter with the hardware configuration you have +assigned. You can use the diagnostics 'Network Test' to test the ability of the +adapter to communicate across the Ethernet with another PC equipped with a +CS8900/20-based adapter card (it must also be running the CS8900/20 Setup +Utility). + + NOTE: The Setup Utility's diagnostics are designed to run in a + DOS-only operating system environment. DO NOT run the diagnostics + from a DOS or command prompt session under Windows 95, Windows NT, + OS/2, or other operating system. + +To run the diagnostics tests on the CS8900/20 adapter: + + 1.) Boot DOS on the PC and start the CS8900/20 Setup Utility. + + 2.) The adapter's current configuration is displayed. Hit the ENTER key to + get to the main menu. + + 4.) Select 'Diagnostics' (ALT-G) from the main menu. + * Select 'Self-Test' to test the adapter's basic functionality. + * Select 'Network Test' to test the network connection and cabling. + + +5.2.1 DIAGNOSTIC SELF-TEST + +The diagnostic self-test checks the adapter's basic functionality as well as +its ability to communicate across the ISA bus based on the system resources +assigned during hardware configuration. The following tests are performed: + + * IO Register Read/Write Test + The IO Register Read/Write test insures that the CS8900/20 can be + accessed in IO mode, and that the IO base address is correct. + + * Shared Memory Test + The Shared Memory test insures the CS8900/20 can be accessed in memory + mode and that the range of memory addresses assigned does not conflict + with other devices in the system. + + * Interrupt Test + The Interrupt test insures there are no conflicts with the assigned IRQ + signal. + + * EEPROM Test + The EEPROM test insures the EEPROM can be read. + + * Chip RAM Test + The Chip RAM test insures the 4K of memory internal to the CS8900/20 is + working properly. + + * Internal Loop-back Test + The Internal Loop Back test insures the adapter's transmitter and + receiver are operating properly. If this test fails, make sure the + adapter's cable is connected to the network (check for LED activity for + example). + + * Boot PROM Test + The Boot PROM test insures the Boot PROM is present, and can be read. + Failure indicates the Boot PROM was not successfully read due to a + hardware problem or due to a conflicts on the Boot PROM address + assignment. (Test only applies if the adapter is configured to use the + Boot PROM option.) + +Failure of a test item indicates a possible system resource conflict with +another device on the ISA bus. In this case, you should use the Manual Setup +option to reconfigure the adapter by selecting a different value for the system +resource that failed. + + +5.2.2 DIAGNOSTIC NETWORK TEST + +The Diagnostic Network Test verifies a working network connection by +transferring data between two CS8900/20 adapters installed in different PCs +on the same network. (Note: the diagnostic network test should not be run +between two nodes across a router.) + +This test requires that each of the two PCs have a CS8900/20-based adapter +installed and have the CS8900/20 Setup Utility running. The first PC is +configured as a Responder and the other PC is configured as an Initiator. +Once the Initiator is started, it sends data frames to the Responder which +returns the frames to the Initiator. + +The total number of frames received and transmitted are displayed on the +Initiator's display, along with a count of the number of frames received and +transmitted OK or in error. The test can be terminated anytime by the user at +either PC. + +To setup the Diagnostic Network Test: + + 1.) Select a PC with a CS8900/20-based adapter and a known working network + connection to act as the Responder. Run the CS8900/20 Setup Utility + and select 'Diagnostics -> Network Test -> Responder' from the main + menu. Hit ENTER to start the Responder. + + 2.) Return to the PC with the CS8900/20-based adapter you want to test and + start the CS8900/20 Setup Utility. + + 3.) From the main menu, Select 'Diagnostic -> Network Test -> Initiator'. + Hit ENTER to start the test. + +You may stop the test on the Initiator at any time while allowing the Responder +to continue running. In this manner, you can move to additional PCs and test +them by starting the Initiator on another PC without having to stop/start the +Responder. + + + +5.3 USING THE ADAPTER'S LEDs + +The 2 and 3-media adapters have two LEDs visible on the back end of the board +located near the 10Base-T connector. + +Link Integrity LED: A "steady" ON of the green LED indicates a valid 10Base-T +connection. (Only applies to 10Base-T. The green LED has no significance for +a 10Base-2 or AUI connection.) + +TX/RX LED: The yellow LED lights briefly each time the adapter transmits or +receives data. (The yellow LED will appear to "flicker" on a typical network.) + + +5.4 RESOLVING I/O CONFLICTS + +An IO conflict occurs when two or more adapter use the same ISA resource (IO +address, memory address or IRQ). You can usually detect an IO conflict in one +of four ways after installing and or configuring the CS8900/20-based adapter: + + 1.) The system does not boot properly (or at all). + + 2.) The driver can not communicate with the adapter, reporting an "Adapter + not found" error message. + + 3.) You cannot connect to the network or the driver will not load. + + 4.) If you have configured the adapter to run in memory mode but the driver + reports it is using IO mode when loading, this is an indication of a + memory address conflict. + +If an IO conflict occurs, run the CS8900/20 Setup Utility and perform a +diagnostic self-test. Normally, the ISA resource in conflict will fail the +self-test. If so, reconfigure the adapter selecting another choice for the +resource in conflict. Run the diagnostics again to check for further IO +conflicts. + +In some cases, such as when the PC will not boot, it may be necessary to remove +the adapter and reconfigure it by installing it in another PC to run the +CS8900/20 Setup Utility. Once reinstalled in the target system, run the +diagnostics self-test to ensure the new configuration is free of conflicts +before loading the driver again. + +When manually configuring the adapter, keep in mind the typical ISA system +resource usage as indicated in the tables below. + +I/O Address Device IRQ Device +----------- -------- --- -------- + 200-20F Game I/O adapter 3 COM2, Bus Mouse + 230-23F Bus Mouse 4 COM1 + 270-27F LPT3: third parallel port 5 LPT2 + 2F0-2FF COM2: second serial port 6 Floppy Disk controller + 320-32F Fixed disk controller 7 LPT1 + 8 Real-time Clock + 9 EGA/VGA display adapter + 12 Mouse (PS/2) +Memory Address Device 13 Math Coprocessor +-------------- --------------------- 14 Hard Disk controller +A000-BFFF EGA Graphics Adpater +A000-C7FF VGA Graphics Adpater +B000-BFFF Mono Graphics Adapter +B800-BFFF Color Graphics Adapter +E000-FFFF AT BIOS + + + + +6.0 TECHNICAL SUPPORT +=============================================================================== + +6.1 CONTACTING CIRRUS LOGIC'S TECHNICAL SUPPORT + +Cirrus Logic's CS89XX Technical Application Support can be reached at: + +Telephone :(800) 888-5016 (from inside U.S. and Canada) + :(512) 442-7555 (from outside the U.S. and Canada) +Fax :(512) 912-3871 +Email :ethernet@crystal.cirrus.com +WWW :http://www.cirrus.com + + +6.2 INFORMATION REQUIRED BEFORE CONTACTING TECHNICAL SUPPORT + +Before contacting Cirrus Logic for technical support, be prepared to provide as +Much of the following information as possible. + +1.) Adapter type (CRD8900, CDB8900, CDB8920, etc.) + +2.) Adapter configuration + + * IO Base, Memory Base, IO or memory mode enabled, IRQ, DMA channel + * Plug and Play enabled/disabled (CS8920-based adapters only) + * Configured for media auto-detect or specific media type (which type). + +3.) PC System's Configuration + + * Plug and Play system (yes/no) + * BIOS (make and version) + * System make and model + * CPU (type and speed) + * System RAM + * SCSI Adapter + +4.) Software + + * CS89XX driver and version + * Your network operating system and version + * Your system's OS version + * Version of all protocol support files + +5.) Any Error Message displayed. + + + +6.3 OBTAINING THE LATEST DRIVER VERSION + +You can obtain the latest CS89XX drivers and support software from Cirrus Logic's +Web site. You can also contact Cirrus Logic's Technical Support (email: +ethernet@crystal.cirrus.com) and request that you be registered for automatic +software-update notification. + +Cirrus Logic maintains a web page at http://www.cirrus.com with the +the latest drivers and technical publications. + + +6.4 Current maintainer + +In February 2000 the maintenance of this driver was assumed by Andrew +Morton <akpm@zip.com.au> + +6.5 Kernel module parameters + +For use in embedded environments with no cs89x0 EEPROM, the kernel boot +parameter `cs89x0_media=' has been implemented. Usage is: + + cs89x0_media=rj45 or + cs89x0_media=aui or + cs89x0_media=bnc + |