diff options
author | Phil Endecott <kernel@chezphil.org> | 2007-06-29 09:19:14 +0200 |
---|---|---|
committer | Mark M. Hoffman <mhoffman@lightlink.com> | 2007-07-19 14:22:15 -0400 |
commit | aba5073d3f4c928c89c483d85f8cff7cc9aa3312 (patch) | |
tree | c966ca4de6e14d4edbb7232b3dcef3fb7e114b7f | |
parent | 158ce07564b68d4215b9560213a089d6f7c5a4ea (diff) | |
download | kernel_samsung_smdk4412-aba5073d3f4c928c89c483d85f8cff7cc9aa3312.zip kernel_samsung_smdk4412-aba5073d3f4c928c89c483d85f8cff7cc9aa3312.tar.gz kernel_samsung_smdk4412-aba5073d3f4c928c89c483d85f8cff7cc9aa3312.tar.bz2 |
hwmon/f71805f: Add temperature-tracking fan control mode
Add support for the "temperature mode" fan speed control. In this mode,
the user can define 3 temperature/speed trip points, and the chip will
set the speed automatically according to the temperature changes.
Signed-off-by: Phil Endecott <kernel@chezphil.org>
Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark M. Hoffman <mhoffman@lightlink.com>
-rw-r--r-- | Documentation/hwmon/f71805f | 35 | ||||
-rw-r--r-- | drivers/hwmon/f71805f.c | 167 |
2 files changed, 188 insertions, 14 deletions
diff --git a/Documentation/hwmon/f71805f b/Documentation/hwmon/f71805f index bfd0f15..94e0d2c 100644 --- a/Documentation/hwmon/f71805f +++ b/Documentation/hwmon/f71805f @@ -5,11 +5,11 @@ Supported chips: * Fintek F71805F/FG Prefix: 'f71805f' Addresses scanned: none, address read from Super I/O config space - Datasheet: Provided by Fintek on request + Datasheet: Available from the Fintek website * Fintek F71872F/FG Prefix: 'f71872f' Addresses scanned: none, address read from Super I/O config space - Datasheet: Provided by Fintek on request + Datasheet: Available from the Fintek website Author: Jean Delvare <khali@linux-fr.org> @@ -128,7 +128,9 @@ it. When the PWM method is used, you can select the operating frequency, from 187.5 kHz (default) to 31 Hz. The best frequency depends on the fan model. As a rule of thumb, lower frequencies seem to give better -control, but may generate annoying high-pitch noise. Fintek recommends +control, but may generate annoying high-pitch noise. So a frequency just +above the audible range, such as 25 kHz, may be a good choice; if this +doesn't give you good linear control, try reducing it. Fintek recommends not going below 1 kHz, as the fan tachometers get confused by lower frequencies as well. @@ -136,16 +138,23 @@ When the DC method is used, Fintek recommends not going below 5 V, which corresponds to a pwm value of 106 for the driver. The driver doesn't enforce this limit though. -Three different fan control modes are supported: +Three different fan control modes are supported; the mode number is written +to the pwm<n>_enable file. -* Manual mode - You ask for a specific PWM duty cycle or DC voltage. +* 1: Manual mode + You ask for a specific PWM duty cycle or DC voltage by writing to the + pwm<n> file. -* Fan speed mode - You ask for a specific fan speed. This mode assumes that pwm1 - corresponds to fan1, pwm2 to fan2 and pwm3 to fan3. +* 2: Temperature mode + You define 3 temperature/fan speed trip points using the + pwm<n>_auto_point<m>_temp and _fan files. These define a staircase + relationship between temperature and fan speed with two additional points + interpolated between the values that you define. When the temperature + is below auto_point1_temp the fan is switched off. -* Temperature mode - You define 3 temperature/fan speed trip points, and the fan speed is - adjusted depending on the measured temperature, using interpolation. - This mode is not yet supported by the driver. +* 3: Fan speed mode + You ask for a specific fan speed by writing to the fan<n>_target file. + +Both of the automatic modes require that pwm1 corresponds to fan1, pwm2 to +fan2 and pwm3 to fan3. Temperature mode also requires that temp1 corresponds +to pwm1 and fan1, etc. diff --git a/drivers/hwmon/f71805f.c b/drivers/hwmon/f71805f.c index 8fe4d70..6f60715 100644 --- a/drivers/hwmon/f71805f.c +++ b/drivers/hwmon/f71805f.c @@ -127,6 +127,13 @@ superio_exit(int base) #define F71805F_REG_TEMP_HIGH(nr) (0x54 + 2 * (nr)) #define F71805F_REG_TEMP_HYST(nr) (0x55 + 2 * (nr)) #define F71805F_REG_TEMP_MODE 0x01 +/* pwm/fan pwmnr from 0 to 2, auto point apnr from 0 to 2 */ +/* map Fintek numbers to our numbers as follows: 9->0, 5->1, 1->2 */ +#define F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr) \ + (0xA0 + 0x10 * (pwmnr) + (2 - (apnr))) +#define F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr) \ + (0xA4 + 0x10 * (pwmnr) + \ + 2 * (2 - (apnr))) #define F71805F_REG_START 0x00 /* status nr from 0 to 2 */ @@ -144,6 +151,11 @@ superio_exit(int base) * Data structures and manipulation thereof */ +struct f71805f_auto_point { + u8 temp[3]; + u16 fan[3]; +}; + struct f71805f_data { unsigned short addr; const char *name; @@ -170,6 +182,7 @@ struct f71805f_data { u8 temp_hyst[3]; u8 temp_mode; unsigned long alarms; + struct f71805f_auto_point auto_points[3]; }; struct f71805f_sio_data { @@ -312,7 +325,7 @@ static void f71805f_write16(struct f71805f_data *data, u8 reg, u16 val) static struct f71805f_data *f71805f_update_device(struct device *dev) { struct f71805f_data *data = dev_get_drvdata(dev); - int nr; + int nr, apnr; mutex_lock(&data->update_lock); @@ -342,6 +355,18 @@ static struct f71805f_data *f71805f_update_device(struct device *dev) F71805F_REG_TEMP_HYST(nr)); } data->temp_mode = f71805f_read8(data, F71805F_REG_TEMP_MODE); + for (nr = 0; nr < 3; nr++) { + for (apnr = 0; apnr < 3; apnr++) { + data->auto_points[nr].temp[apnr] = + f71805f_read8(data, + F71805F_REG_PWM_AUTO_POINT_TEMP(nr, + apnr)); + data->auto_points[nr].fan[apnr] = + f71805f_read16(data, + F71805F_REG_PWM_AUTO_POINT_FAN(nr, + apnr)); + } + } data->last_limits = jiffies; } @@ -705,6 +730,70 @@ static ssize_t set_pwm_freq(struct device *dev, struct device_attribute return count; } +static ssize_t show_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, + char* buf) +{ + struct f71805f_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); + int pwmnr = attr->nr; + int apnr = attr->index; + + return sprintf(buf, "%ld\n", + temp_from_reg(data->auto_points[pwmnr].temp[apnr])); +} + +static ssize_t set_pwm_auto_point_temp(struct device *dev, + struct device_attribute *devattr, + const char* buf, size_t count) +{ + struct f71805f_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); + int pwmnr = attr->nr; + int apnr = attr->index; + unsigned long val = simple_strtol(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->auto_points[pwmnr].temp[apnr] = temp_to_reg(val); + f71805f_write8(data, F71805F_REG_PWM_AUTO_POINT_TEMP(pwmnr, apnr), + data->auto_points[pwmnr].temp[apnr]); + mutex_unlock(&data->update_lock); + + return count; +} + +static ssize_t show_pwm_auto_point_fan(struct device *dev, + struct device_attribute *devattr, + char* buf) +{ + struct f71805f_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); + int pwmnr = attr->nr; + int apnr = attr->index; + + return sprintf(buf, "%ld\n", + fan_from_reg(data->auto_points[pwmnr].fan[apnr])); +} + +static ssize_t set_pwm_auto_point_fan(struct device *dev, + struct device_attribute *devattr, + const char* buf, size_t count) +{ + struct f71805f_data *data = dev_get_drvdata(dev); + struct sensor_device_attribute_2 *attr = to_sensor_dev_attr_2(devattr); + int pwmnr = attr->nr; + int apnr = attr->index; + unsigned long val = simple_strtoul(buf, NULL, 10); + + mutex_lock(&data->update_lock); + data->auto_points[pwmnr].fan[apnr] = fan_to_reg(val); + f71805f_write16(data, F71805F_REG_PWM_AUTO_POINT_FAN(pwmnr, apnr), + data->auto_points[pwmnr].fan[apnr]); + mutex_unlock(&data->update_lock); + + return count; +} + static ssize_t show_temp(struct device *dev, struct device_attribute *devattr, char *buf) { @@ -932,6 +1021,63 @@ static SENSOR_DEVICE_ATTR(pwm3_freq, S_IRUGO | S_IWUSR, show_pwm_freq, set_pwm_freq, 2); static SENSOR_DEVICE_ATTR(pwm3_mode, S_IRUGO, show_pwm_mode, NULL, 2); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 0, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point1_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 0, 0); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 0, 1); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point2_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 0, 1); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 0, 2); +static SENSOR_DEVICE_ATTR_2(pwm1_auto_point3_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 0, 2); + +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 1, 0); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point1_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 1, 0); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 1, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point2_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 1, 1); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 1, 2); +static SENSOR_DEVICE_ATTR_2(pwm2_auto_point3_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 1, 2); + +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 2, 0); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point1_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 2, 0); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 2, 1); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point2_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 2, 1); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_temp, S_IRUGO | S_IWUSR, + show_pwm_auto_point_temp, set_pwm_auto_point_temp, + 2, 2); +static SENSOR_DEVICE_ATTR_2(pwm3_auto_point3_fan, S_IRUGO | S_IWUSR, + show_pwm_auto_point_fan, set_pwm_auto_point_fan, + 2, 2); + static SENSOR_DEVICE_ATTR(in0_alarm, S_IRUGO, show_alarm, NULL, 0); static SENSOR_DEVICE_ATTR(in1_alarm, S_IRUGO, show_alarm, NULL, 1); static SENSOR_DEVICE_ATTR(in2_alarm, S_IRUGO, show_alarm, NULL, 2); @@ -1014,6 +1160,25 @@ static struct attribute *f71805f_attributes[] = { &sensor_dev_attr_temp3_max_hyst.dev_attr.attr, &sensor_dev_attr_temp3_type.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point1_fan.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point2_fan.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm1_auto_point3_fan.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point1_fan.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point2_fan.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm2_auto_point3_fan.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point1_fan.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point2_fan.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point3_temp.dev_attr.attr, + &sensor_dev_attr_pwm3_auto_point3_fan.dev_attr.attr, + &sensor_dev_attr_in0_alarm.dev_attr.attr, &sensor_dev_attr_in1_alarm.dev_attr.attr, &sensor_dev_attr_in2_alarm.dev_attr.attr, |