Merge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial

* 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/trivial: (43 commits)
  Documentation/trace/events.txt: Remove obsolete sched_signal_send.
  writeback: fix global_dirty_limits comment runtime -> real-time
  ppc: fix comment typo singal -> signal
  drivers: fix comment typo diable -> disable.
  m68k: fix comment typo diable -> disable.
  wireless: comment typo fix diable -> disable.
  media: comment typo fix diable -> disable.
  remove doc for obsolete dynamic-printk kernel-parameter
  remove extraneous 'is' from Documentation/iostats.txt
  Fix spelling milisec -> ms in snd_ps3 module parameter description
  Fix spelling mistakes in comments
  Revert conflicting V4L changes
  i7core_edac: fix typos in comments
  mm/rmap.c: fix comment
  sound, ca0106: Fix assignment to 'channel'.
  hrtimer: fix a typo in comment
  init/Kconfig: fix typo
  anon_inodes: fix wrong function name in comment
  fix comment typos concerning "consistent"
  poll: fix a typo in comment
  ...

Fix up trivial conflicts in:
 - drivers/net/wireless/iwlwifi/iwl-core.c (moved to iwl-legacy.c)
 - fs/ext4/ext4.h

Also fix missed 'diabled' typo in drivers/net/bnx2x/bnx2x.h while at it.

21 files changed, 39 insertions, 38 deletions

diff --git a/Documentation/DocBook/mtdnand.tmpl b/Documentation/DocBook/mtdnand.tmpl
index 020ac80..620eb3f 100644
--- a/Documentation/DocBook/mtdnand.tmpl
+++ b/Documentation/DocBook/mtdnand.tmpl
@@ -250,7 +250,7 @@ static void board_hwcontrol(struct mtd_info *mtd, int cmd)
 		<title>Device ready function</title>
 		<para>
 			If the hardware interface has the ready busy pin of the NAND chip connected to a
-			GPIO or other accesible I/O pin, this function is used to read back the state of the
+			GPIO or other accessible I/O pin, this function is used to read back the state of the
 			pin. The function has no arguments and should return 0, if the device is busy (R/B pin 
 			is low) and 1, if the device is ready (R/B pin is high).
 			If the hardware interface does not give access to the ready busy pin, then
diff --git a/Documentation/cgroups/cgroup_event_listener.c b/Documentation/cgroups/cgroup_event_listener.c
index 8c2bfc4..3e082f9 100644
--- a/Documentation/cgroups/cgroup_event_listener.c
+++ b/Documentation/cgroups/cgroup_event_listener.c
@@ -91,7 +91,7 @@ int main(int argc, char **argv)
 
 		if (ret == -1) {
 			perror("cgroup.event_control "
-					"is not accessable any more");
+					"is not accessible any more");
 			break;
 		}
 
diff --git a/Documentation/cgroups/memcg_test.txt b/Documentation/cgroups/memcg_test.txt
index b7eecec..fc8fa97 100644
--- a/Documentation/cgroups/memcg_test.txt
+++ b/Documentation/cgroups/memcg_test.txt
@@ -398,7 +398,7 @@ Under below explanation, we assume CONFIG_MEM_RES_CTRL_SWAP=y.
 	written to move_charge_at_immigrate.
 
  9.10 Memory thresholds
-	Memory controler implements memory thresholds using cgroups notification
+	Memory controller implements memory thresholds using cgroups notification
 	API. You can use Documentation/cgroups/cgroup_event_listener.c to test
 	it.
 
diff --git a/Documentation/iostats.txt b/Documentation/iostats.txt
index 59a69ec..f6dece5 100644
--- a/Documentation/iostats.txt
+++ b/Documentation/iostats.txt
@@ -81,7 +81,7 @@ Field  9 -- # of I/Os currently in progress
     The only field that should go to zero. Incremented as requests are
     given to appropriate struct request_queue and decremented as they finish.
 Field 10 -- # of milliseconds spent doing I/Os
-    This field is increases so long as field 9 is nonzero.
+    This field increases so long as field 9 is nonzero.
 Field 11 -- weighted # of milliseconds spent doing I/Os
     This field is incremented at each I/O start, I/O completion, I/O
     merge, or read of these stats by the number of I/Os in progress
diff --git a/Documentation/kdump/kdump.txt b/Documentation/kdump/kdump.txt
index cab61d8..7a9e0b4 100644
--- a/Documentation/kdump/kdump.txt
+++ b/Documentation/kdump/kdump.txt
@@ -65,18 +65,21 @@ Install kexec-tools
 
 2) Download the kexec-tools user-space package from the following URL:
 
-http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/kexec-tools.tar.gz
+http://kernel.org/pub/linux/utils/kernel/kexec/kexec-tools.tar.gz
 
 This is a symlink to the latest version.
 
 The latest kexec-tools git tree is available at:
 
-git://git.kernel.org/pub/scm/linux/kernel/git/horms/kexec-tools.git
-or
-http://www.kernel.org/git/?p=linux/kernel/git/horms/kexec-tools.git
+git://git.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+and
+http://www.kernel.org/pub/scm/utils/kernel/kexec/kexec-tools.git
+
+There is also a gitweb interface available at
+http://www.kernel.org/git/?p=utils/kernel/kexec/kexec-tools.git
 
 More information about kexec-tools can be found at
-http://www.kernel.org/pub/linux/kernel/people/horms/kexec-tools/README.html
+http://www.kernel.org/pub/linux/utils/kernel/kexec/README.html
 
 3) Unpack the tarball with the tar command, as follows:
 
@@ -439,6 +442,6 @@ To Do
 Contact
 =======
 
-Vivek Goyal (vgoyal@in.ibm.com)
+Vivek Goyal (vgoyal@redhat.com)
 Maneesh Soni (maneesh@in.ibm.com)
 
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 5e4d9a6..338c96e 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -659,11 +659,6 @@ and is between 256 and 4096 characters. It is defined in the file
 
 	dscc4.setup=	[NET]
 
-	dynamic_printk	Enables pr_debug()/dev_dbg() calls if
-			CONFIG_DYNAMIC_PRINTK_DEBUG has been enabled.
-			These can also be switched on/off via
-			<debugfs>/dynamic_printk/modules
-
 	earlycon=	[KNL] Output early console device and options.
 		uart[8250],io,<addr>[,options]
 		uart[8250],mmio,<addr>[,options]
diff --git a/Documentation/ko_KR/HOWTO b/Documentation/ko_KR/HOWTO
index e3a55b6..ab5189a 100644
--- a/Documentation/ko_KR/HOWTO
+++ b/Documentation/ko_KR/HOWTO
@@ -391,8 +391,8 @@ bugme-new 메일링 리스트나(새로운 버그 리포트들만이 이곳에�
 bugme-janitor 메일링 리스트(bugzilla에 모든 변화들이 여기서 메일로 전해진다)
 에 등록하면 된다.
 
-      http://lists.osdl.org/mailman/listinfo/bugme-new
-      http://lists.osdl.org/mailman/listinfo/bugme-janitors
+      https://lists.linux-foundation.org/mailman/listinfo/bugme-new
+      https://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
 
 
 
diff --git a/Documentation/kprobes.txt b/Documentation/kprobes.txt
index 741fe66..0cfb00f 100644
--- a/Documentation/kprobes.txt
+++ b/Documentation/kprobes.txt
@@ -598,7 +598,7 @@ a 5-byte jump instruction. So there are several limitations.
 a) The instructions in DCR must be relocatable.
 b) The instructions in DCR must not include a call instruction.
 c) JTPR must not be targeted by any jump or call instruction.
-d) DCR must not straddle the border betweeen functions.
+d) DCR must not straddle the border between functions.
 
 Anyway, these limitations are checked by the in-kernel instruction
 decoder, so you don't need to worry about that.
diff --git a/Documentation/kvm/api.txt b/Documentation/kvm/api.txt
index b336266..50713e3 100644
--- a/Documentation/kvm/api.txt
+++ b/Documentation/kvm/api.txt
@@ -874,7 +874,7 @@ Possible values are:
  - KVM_MP_STATE_HALTED:          the vcpu has executed a HLT instruction and
                                  is waiting for an interrupt
  - KVM_MP_STATE_SIPI_RECEIVED:   the vcpu has just received a SIPI (vector
-                                 accesible via KVM_GET_VCPU_EVENTS)
+                                 accessible via KVM_GET_VCPU_EVENTS)
 
 This ioctl is only useful after KVM_CREATE_IRQCHIP.  Without an in-kernel
 irqchip, the multiprocessing state must be maintained by userspace.
diff --git a/Documentation/lguest/lguest.txt b/Documentation/lguest/lguest.txt
index efb3a6a..6ccaf8e 100644
--- a/Documentation/lguest/lguest.txt
+++ b/Documentation/lguest/lguest.txt
@@ -111,8 +111,11 @@ Running Lguest:
 
   Then use --tunnet=bridge:lg0 when launching the guest.
 
-  See http://linux-net.osdl.org/index.php/Bridge for general information
-  on how to get bridging working.
+  See:
+  
+    http://www.linuxfoundation.org/collaborate/workgroups/networking/bridge
+    
+  for general information on how to get bridging to work.
 
 There is a helpful mailing list at http://ozlabs.org/mailman/listinfo/lguest
 
diff --git a/Documentation/networking/bridge.txt b/Documentation/networking/bridge.txt
index bec69a8..a7ba5e4 100644
--- a/Documentation/networking/bridge.txt
+++ b/Documentation/networking/bridge.txt
@@ -1,8 +1,8 @@
 In order to use the Ethernet bridging functionality, you'll need the
 userspace tools. These programs and documentation are available
-at http://www.linux-foundation.org/en/Net:Bridge.  The download page is
+at http://www.linuxfoundation.org/en/Net:Bridge.  The download page is
 http://prdownloads.sourceforge.net/bridge.
 
 If you still have questions, don't hesitate to post to the mailing list 
-(more info http://lists.osdl.org/mailman/listinfo/bridge).
+(more info https://lists.linux-foundation.org/mailman/listinfo/bridge).
 
diff --git a/Documentation/networking/caif/spi_porting.txt b/Documentation/networking/caif/spi_porting.txt
index 61d7c92..0cb8cb9 100644
--- a/Documentation/networking/caif/spi_porting.txt
+++ b/Documentation/networking/caif/spi_porting.txt
@@ -32,7 +32,7 @@ the physical hardware, both with regard to SPI and to GPIOs.
 	This function is called by the CAIF SPI interface to give
 	you a chance to set up your hardware to be ready to receive
 	a stream of data from the master. The xfer structure contains
-	both physical and logical adresses, as well as the total length
+	both physical and logical addresses, as well as the total length
 	of the transfer in both directions.The dev parameter can be used
 	to map to different CAIF SPI slave devices.
 
diff --git a/Documentation/networking/dccp.txt b/Documentation/networking/dccp.txt
index 811872b..d718bc2 100644
--- a/Documentation/networking/dccp.txt
+++ b/Documentation/networking/dccp.txt
@@ -38,11 +38,11 @@ The Linux DCCP implementation does not currently support all the features that a
 specified in RFCs 4340...42.
 
 The known bugs are at:
-	http://linux-net.osdl.org/index.php/TODO#DCCP
+	http://www.linuxfoundation.org/collaborate/workgroups/networking/todo#DCCP
 
 For more up-to-date versions of the DCCP implementation, please consider using
 the experimental DCCP test tree; instructions for checking this out are on:
-http://linux-net.osdl.org/index.php/DCCP_Testing#Experimental_DCCP_source_tree
+http://www.linuxfoundation.org/collaborate/workgroups/networking/dccp_testing#Experimental_DCCP_source_tree
 
 
 Socket options
diff --git a/Documentation/networking/generic_netlink.txt b/Documentation/networking/generic_netlink.txt
index d4f8b8b..3e07111 100644
--- a/Documentation/networking/generic_netlink.txt
+++ b/Documentation/networking/generic_netlink.txt
@@ -1,3 +1,3 @@
 A wiki document on how to use Generic Netlink can be found here:
 
- * http://linux-net.osdl.org/index.php/Generic_Netlink_HOWTO
+ * http://www.linuxfoundation.org/collaborate/workgroups/networking/generic_netlink_howto
diff --git a/Documentation/powerpc/booting-without-of.txt b/Documentation/powerpc/booting-without-of.txt
index 3272ed5..7400d75 100644
--- a/Documentation/powerpc/booting-without-of.txt
+++ b/Documentation/powerpc/booting-without-of.txt
@@ -1098,7 +1098,7 @@ supported currently at the toplevel.
                                  * an arbitrary array of bytes
                                  */
 
-  childnode@addresss {	/* define a child node named "childnode"
+  childnode@address {	/* define a child node named "childnode"
                                  * whose unit name is "childnode at
 				 * address"
                                  */
diff --git a/Documentation/scheduler/00-INDEX b/Documentation/scheduler/00-INDEX
index 3c00c9c..d2651c4 100644
--- a/Documentation/scheduler/00-INDEX
+++ b/Documentation/scheduler/00-INDEX
@@ -3,7 +3,7 @@
 sched-arch.txt
 	- CPU Scheduler implementation hints for architecture specific code.
 sched-design-CFS.txt
-	- goals, design and implementation of the Complete Fair Scheduler.
+	- goals, design and implementation of the Completely Fair Scheduler.
 sched-domains.txt
 	- information on scheduling domains.
 sched-nice-design.txt
diff --git a/Documentation/scsi/ChangeLog.lpfc b/Documentation/scsi/ChangeLog.lpfc
index 337c924..5e83769 100644
--- a/Documentation/scsi/ChangeLog.lpfc
+++ b/Documentation/scsi/ChangeLog.lpfc
@@ -573,7 +573,7 @@ Changes from 20041018 to 20041123
 	* Backround nodev_timeout processing to DPC This enables us to
 	  unblock (stop dev_loss_tmo) when appopriate.
 	* Fix array discovery with multiple luns.  The max_luns was 0 at
-	  the time the host structure was intialized.  lpfc_cfg_params
+	  the time the host structure was initialized.  lpfc_cfg_params
 	  then set the max_luns to the correct value afterwards.
 	* Remove unused define LPFC_MAX_LUN and set the default value of
 	  lpfc_max_lun parameter to 512.
diff --git a/Documentation/timers/timer_stats.txt b/Documentation/timers/timer_stats.txt
index 9bd00fc..8abd40b 100644
--- a/Documentation/timers/timer_stats.txt
+++ b/Documentation/timers/timer_stats.txt
@@ -19,7 +19,7 @@ Linux system over a sample period:
 
 - the pid of the task(process) which initialized the timer
 - the name of the process which initialized the timer
-- the function where the timer was intialized
+- the function where the timer was initialized
 - the callback function which is associated to the timer
 - the number of events (callbacks)
 
diff --git a/Documentation/trace/events.txt b/Documentation/trace/events.txt
index 09bd8e9..b510564 100644
--- a/Documentation/trace/events.txt
+++ b/Documentation/trace/events.txt
@@ -125,7 +125,7 @@ is the size of the data item, in bytes.
 For example, here's the information displayed for the 'sched_wakeup'
 event:
 
-# cat /debug/tracing/events/sched/sched_wakeup/format
+# cat /sys/kernel/debug/tracing/events/sched/sched_wakeup/format
 
 name: sched_wakeup
 ID: 60
@@ -201,19 +201,19 @@ to the 'filter' file for the given event.
 
 For example:
 
-# cd /debug/tracing/events/sched/sched_wakeup
+# cd /sys/kernel/debug/tracing/events/sched/sched_wakeup
 # echo "common_preempt_count > 4" > filter
 
 A slightly more involved example:
 
-# cd /debug/tracing/events/sched/sched_signal_send
+# cd /sys/kernel/debug/tracing/events/signal/signal_generate
 # echo "((sig >= 10 && sig < 15) || sig == 17) && comm != bash" > filter
 
 If there is an error in the expression, you'll get an 'Invalid
 argument' error when setting it, and the erroneous string along with
 an error message can be seen by looking at the filter e.g.:
 
-# cd /debug/tracing/events/sched/sched_signal_send
+# cd /sys/kernel/debug/tracing/events/signal/signal_generate
 # echo "((sig >= 10 && sig < 15) || dsig == 17) && comm != bash" > filter
 -bash: echo: write error: Invalid argument
 # cat filter
diff --git a/Documentation/zh_CN/HOWTO b/Documentation/zh_CN/HOWTO
index 6916077..faf976c 100644
--- a/Documentation/zh_CN/HOWTO
+++ b/Documentation/zh_CN/HOWTO
@@ -347,8 +347,8 @@ bugzilla.kernel.org是Linux内核开发者们用来跟踪内核Bug的网站。�
 最新bug的通知，可以订阅bugme-new邮件列表（只有新的bug报告会被寄到这里）
 或者订阅bugme-janitor邮件列表（所有bugzilla的变动都会被寄到这里）。
 
-	http://lists.osdl.org/mailman/listinfo/bugme-new
-	http://lists.osdl.org/mailman/listinfo/bugme-janitors
+	https://lists.linux-foundation.org/mailman/listinfo/bugme-new
+	https://lists.linux-foundation.org/mailman/listinfo/bugme-janitors
 
 
 邮件列表
diff --git a/Documentation/zh_CN/SubmittingDrivers b/Documentation/zh_CN/SubmittingDrivers
index c27b0f6..5889f8d 100644
--- a/Documentation/zh_CN/SubmittingDrivers
+++ b/Documentation/zh_CN/SubmittingDrivers
@@ -61,7 +61,7 @@ Linux 2.4:
 Linux 2.6:
 	除了遵循和 2.4 版内核同样的规则外，你还需要在 linux-kernel 邮件
 	列表上跟踪最新的 API 变化。向 Linux 2.6 内核提交驱动的顶级联系人
-	是 Andrew Morton <akpm@osdl.org>。
+	是 Andrew Morton <akpm@linux-foundation.org>。
 
 决定设备驱动能否被接受的条件
 ----------------------------