[ARM] 4318/2: DSM-G600 Board Support

This patch adds support for the D-Link DSM-G600 Rev A.
This is an ARM XScale IXP4xx system relatively similar to
the NSLU2 and NAS-100D already supported by mainline. An
important difference is Gigabit Ethernet support using
the Via Velocity chipset.

This patch is the combined work of Michael Westerhof and
Alessandro Zummo, with contributions from Michael-Luke
Jones. This version addresses review comments from rmk
and Deepak Saxena.

Signed-off-by: Michael-Luke Jones <mlj28@cam.ac.uk>
Signed-off-by: Alessandro Zummo <a.zummo@towertech.it>
Signed-off-by: Michael Westerhof <mwester@dls.net>
Signed-off-by: Deepak Saxena <dsaxena@plexity.net>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

1 files changed, 74 insertions, 0 deletions

diff --git a/arch/arm/mach-ixp4xx/dsmg600-pci.c b/arch/arm/mach-ixp4xx/dsmg600-pci.c
new file mode 100644
index 0000000..9db7e1f
--- /dev/null
+++ b/arch/arm/mach-ixp4xx/dsmg600-pci.c
@@ -0,0 +1,74 @@
+/*
+ * DSM-G600 board-level PCI initialization
+ *
+ * Copyright (C) 2006 Tower Technologies
+ * Author: Alessandro Zummo <a.zummo@towertech.it>
+ *
+ * based on ixdp425-pci.c:
+ *	Copyright (C) 2002 Intel Corporation.
+ *	Copyright (C) 2003-2004 MontaVista Software, Inc.
+ *
+ * Maintainer: http://www.nslu2-linux.org/
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/pci.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+
+#include <asm/mach/pci.h>
+#include <asm/mach-types.h>
+
+void __init dsmg600_pci_preinit(void)
+{
+	set_irq_type(IRQ_DSMG600_PCI_INTA, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTB, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTC, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTD, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTE, IRQT_LOW);
+	set_irq_type(IRQ_DSMG600_PCI_INTF, IRQT_LOW);
+
+	ixp4xx_pci_preinit();
+}
+
+static int __init dsmg600_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
+{
+	static int pci_irq_table[DSMG600_PCI_MAX_DEV][DSMG600_PCI_IRQ_LINES] =
+	{
+		{ IRQ_DSMG600_PCI_INTE, -1, -1 },
+		{ IRQ_DSMG600_PCI_INTA, -1, -1 },
+		{ IRQ_DSMG600_PCI_INTB, IRQ_DSMG600_PCI_INTC, IRQ_DSMG600_PCI_INTD },
+		{ IRQ_DSMG600_PCI_INTF, -1, -1 },
+	};
+
+	int irq = -1;
+
+	if (slot >= 1 && slot <= DSMG600_PCI_MAX_DEV &&
+		pin >= 1 && pin <= DSMG600_PCI_IRQ_LINES)
+		irq = pci_irq_table[slot-1][pin-1];
+
+	return irq;
+}
+
+struct hw_pci __initdata dsmg600_pci = {
+	.nr_controllers = 1,
+	.preinit	= dsmg600_pci_preinit,
+	.swizzle	= pci_std_swizzle,
+	.setup		= ixp4xx_setup,
+	.scan		= ixp4xx_scan_bus,
+	.map_irq	= dsmg600_map_irq,
+};
+
+int __init dsmg600_pci_init(void)
+{
+	if (machine_is_dsmg600())
+		pci_common_init(&dsmg600_pci);
+
+	return 0;
+}
+
+subsys_initcall(dsmg600_pci_init);