omap3: zoom: rename zoom2 name to generic zoom

Replace zoom2 with zoom name in board-zoom-peripherals.c file
and board-zoom-debugboard.c. Create mach/board-zoom.h.

This file has functions reused for boards: Zoom2/Zoom3/sdp3630.
Hence have all functions commonly named as zoom

Signed-off-by: Vikram Pandita <vikram.pandita@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 35 insertions, 35 deletions

diff --git a/arch/arm/mach-omap2/board-zoom-debugboard.c b/arch/arm/mach-omap2/board-zoom-debugboard.c
index 91ecddc..bb4018b 100644
--- a/arch/arm/mach-omap2/board-zoom-debugboard.c
+++ b/arch/arm/mach-omap2/board-zoom-debugboard.c
@@ -16,18 +16,18 @@
 
 #include <plat/gpmc.h>
 
-#define ZOOM2_SMSC911X_CS	7
-#define ZOOM2_SMSC911X_GPIO	158
-#define ZOOM2_QUADUART_CS	3
-#define ZOOM2_QUADUART_GPIO	102
+#define ZOOM_SMSC911X_CS	7
+#define ZOOM_SMSC911X_GPIO	158
+#define ZOOM_QUADUART_CS	3
+#define ZOOM_QUADUART_GPIO	102
 #define QUART_CLK		1843200
 #define DEBUG_BASE		0x08000000
-#define ZOOM2_ETHR_START	DEBUG_BASE
+#define ZOOM_ETHR_START	DEBUG_BASE
 
-static struct resource zoom2_smsc911x_resources[] = {
+static struct resource zoom_smsc911x_resources[] = {
 	[0] = {
-		.start	= ZOOM2_ETHR_START,
-		.end	= ZOOM2_ETHR_START + SZ_4K,
+		.start	= ZOOM_ETHR_START,
+		.end	= ZOOM_ETHR_START + SZ_4K,
 		.flags	= IORESOURCE_MEM,
 	},
 	[1] = {
@@ -35,42 +35,42 @@ static struct resource zoom2_smsc911x_resources[] = {
 	},
 };
 
-static struct smsc911x_platform_config zoom2_smsc911x_config = {
+static struct smsc911x_platform_config zoom_smsc911x_config = {
 	.irq_polarity	= SMSC911X_IRQ_POLARITY_ACTIVE_LOW,
 	.irq_type	= SMSC911X_IRQ_TYPE_OPEN_DRAIN,
 	.flags		= SMSC911X_USE_32BIT,
 	.phy_interface	= PHY_INTERFACE_MODE_MII,
 };
 
-static struct platform_device zoom2_smsc911x_device = {
+static struct platform_device zoom_smsc911x_device = {
 	.name		= "smsc911x",
 	.id		= -1,
-	.num_resources	= ARRAY_SIZE(zoom2_smsc911x_resources),
-	.resource	= zoom2_smsc911x_resources,
+	.num_resources	= ARRAY_SIZE(zoom_smsc911x_resources),
+	.resource	= zoom_smsc911x_resources,
 	.dev		= {
-		.platform_data = &zoom2_smsc911x_config,
+		.platform_data = &zoom_smsc911x_config,
 	},
 };
 
-static inline void __init zoom2_init_smsc911x(void)
+static inline void __init zoom_init_smsc911x(void)
 {
 	int eth_cs;
 	unsigned long cs_mem_base;
 	int eth_gpio = 0;
 
-	eth_cs = ZOOM2_SMSC911X_CS;
+	eth_cs = ZOOM_SMSC911X_CS;
 
 	if (gpmc_cs_request(eth_cs, SZ_16M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem for smsc911x\n");
 		return;
 	}
 
-	zoom2_smsc911x_resources[0].start = cs_mem_base + 0x0;
-	zoom2_smsc911x_resources[0].end   = cs_mem_base + 0xff;
+	zoom_smsc911x_resources[0].start = cs_mem_base + 0x0;
+	zoom_smsc911x_resources[0].end   = cs_mem_base + 0xff;
 
-	eth_gpio = ZOOM2_SMSC911X_GPIO;
+	eth_gpio = ZOOM_SMSC911X_GPIO;
 
-	zoom2_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
+	zoom_smsc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio);
 
 	if (gpio_request(eth_gpio, "smsc911x irq") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for smsc911x IRQ\n",
@@ -94,7 +94,7 @@ static struct plat_serial8250_port serial_platform_data[] = {
 	}
 };
 
-static struct platform_device zoom2_debugboard_serial_device = {
+static struct platform_device zoom_debugboard_serial_device = {
 	.name			= "serial8250",
 	.id			= 3,
 	.dev			= {
@@ -102,13 +102,13 @@ static struct platform_device zoom2_debugboard_serial_device = {
 	},
 };
 
-static inline void __init zoom2_init_quaduart(void)
+static inline void __init zoom_init_quaduart(void)
 {
 	int quart_cs;
 	unsigned long cs_mem_base;
 	int quart_gpio = 0;
 
-	quart_cs = ZOOM2_QUADUART_CS;
+	quart_cs = ZOOM_QUADUART_CS;
 
 	if (gpmc_cs_request(quart_cs, SZ_1M, &cs_mem_base) < 0) {
 		printk(KERN_ERR "Failed to request GPMC mem"
@@ -116,7 +116,7 @@ static inline void __init zoom2_init_quaduart(void)
 		return;
 	}
 
-	quart_gpio = ZOOM2_QUADUART_GPIO;
+	quart_gpio = ZOOM_QUADUART_GPIO;
 
 	if (gpio_request(quart_gpio, "TL16CP754C GPIO") < 0) {
 		printk(KERN_ERR "Failed to request GPIO%d for TL16CP754C\n",
@@ -126,15 +126,15 @@ static inline void __init zoom2_init_quaduart(void)
 	gpio_direction_input(quart_gpio);
 }
 
-static inline int omap_zoom2_debugboard_detect(void)
+static inline int omap_zoom_debugboard_detect(void)
 {
 	int debug_board_detect = 0;
 	int ret = 1;
 
-	debug_board_detect = ZOOM2_SMSC911X_GPIO;
+	debug_board_detect = ZOOM_SMSC911X_GPIO;
 
-	if (gpio_request(debug_board_detect, "Zoom2 debug board detect") < 0) {
-		printk(KERN_ERR "Failed to request GPIO%d for Zoom2 debug"
+	if (gpio_request(debug_board_detect, "Zoom debug board detect") < 0) {
+		printk(KERN_ERR "Failed to request GPIO%d for Zoom debug"
 		"board detect\n", debug_board_detect);
 		return 0;
 	}
@@ -147,17 +147,17 @@ static inline int omap_zoom2_debugboard_detect(void)
 	return ret;
 }
 
-static struct platform_device *zoom2_devices[] __initdata = {
-	&zoom2_smsc911x_device,
-	&zoom2_debugboard_serial_device,
+static struct platform_device *zoom_devices[] __initdata = {
+	&zoom_smsc911x_device,
+	&zoom_debugboard_serial_device,
 };
 
-int __init omap_zoom2_debugboard_init(void)
+int __init zoom_debugboard_init(void)
 {
-	if (!omap_zoom2_debugboard_detect())
+	if (!omap_zoom_debugboard_detect())
 		return 0;
 
-	zoom2_init_smsc911x();
-	zoom2_init_quaduart();
-	return platform_add_devices(zoom2_devices, ARRAY_SIZE(zoom2_devices));
+	zoom_init_smsc911x();
+	zoom_init_quaduart();
+	return platform_add_devices(zoom_devices, ARRAY_SIZE(zoom_devices));
 }