ARM: 6336/1: U8500 PRCMU driver

Add an initial driver for communicating with the Power, Reset and
Clock Management Unit (PRCMU) firmware in U8500.
This initial version supports AB8500 communication only.

Signed-off-by: Mattias Nilsson <mattias.i.nilsson@stericsson.com>
Signed-off-by: Mattias Wallin <mattias.wallin@stericsson.com>
Signed-off-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

3 files changed, 107 insertions, 0 deletions

diff --git a/arch/arm/mach-ux500/include/mach/irqs.h b/arch/arm/mach-ux500/include/mach/irqs.h
index 10385bd..0e7a2ce 100644
--- a/arch/arm/mach-ux500/include/mach/irqs.h
+++ b/arch/arm/mach-ux500/include/mach/irqs.h
@@ -41,6 +41,7 @@
 #define IRQ_HSIR_CH2_OVRRUN	(IRQ_SHPI_START + 34)
 #define IRQ_HSIR_CH3_OVRRUN	(IRQ_SHPI_START + 35)
 #define IRQ_AB4500		(IRQ_SHPI_START + 40)
+#define IRQ_PRCMU               (IRQ_SHPI_START + 47)
 #define IRQ_DISP		(IRQ_SHPI_START + 48)
 #define IRQ_SiPI3		(IRQ_SHPI_START + 49)
 #define IRQ_I2C4		(IRQ_SHPI_START + 51)
diff --git a/arch/arm/mach-ux500/include/mach/prcmu-regs.h b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
new file mode 100644
index 0000000..8885f39
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu-regs.h
@@ -0,0 +1,91 @@
+/*
+ * Copyright (c) 2009 ST-Ericsson SA
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2
+ * as published by the Free Software Foundation.
+ */
+#ifndef __MACH_PRCMU_REGS_H
+#define __MACH_PRCMU_REGS_H
+
+#include <mach/hardware.h>
+
+#define _PRCMU_BASE		IO_ADDRESS(U8500_PRCMU_BASE)
+
+#define PRCM_ARM_PLLDIVPS	(_PRCMU_BASE + 0x118)
+#define PRCM_ARM_CHGCLKREQ	(_PRCMU_BASE + 0x114)
+#define PRCM_PLLARM_ENABLE	(_PRCMU_BASE + 0x98)
+#define PRCM_ARMCLKFIX_MGT	(_PRCMU_BASE + 0x0)
+#define PRCM_A9_RESETN_CLR	(_PRCMU_BASE + 0x1f4)
+#define PRCM_A9_RESETN_SET	(_PRCMU_BASE + 0x1f0)
+#define PRCM_ARM_LS_CLAMP	(_PRCMU_BASE + 0x30c)
+#define PRCM_SRAM_A9		(_PRCMU_BASE + 0x308)
+
+/* ARM WFI Standby signal register */
+#define PRCM_ARM_WFI_STANDBY    (_PRCMU_BASE + 0x130)
+#define PRCMU_IOCR              (_PRCMU_BASE + 0x310)
+
+/* CPU mailbox registers */
+#define PRCM_MBOX_CPU_VAL	(_PRCMU_BASE + 0x0fc)
+#define PRCM_MBOX_CPU_SET	(_PRCMU_BASE + 0x100)
+#define PRCM_MBOX_CPU_CLR	(_PRCMU_BASE + 0x104)
+
+/* Dual A9 core interrupt management unit registers */
+#define PRCM_A9_MASK_REQ	(_PRCMU_BASE + 0x328)
+#define PRCM_A9_MASK_ACK	(_PRCMU_BASE + 0x32c)
+#define PRCM_ARMITMSK31TO0	(_PRCMU_BASE + 0x11c)
+#define PRCM_ARMITMSK63TO32	(_PRCMU_BASE + 0x120)
+#define PRCM_ARMITMSK95TO64	(_PRCMU_BASE + 0x124)
+#define PRCM_ARMITMSK127TO96	(_PRCMU_BASE + 0x128)
+#define PRCM_POWER_STATE_VAL	(_PRCMU_BASE + 0x25C)
+#define PRCM_ARMITVAL31TO0	(_PRCMU_BASE + 0x260)
+#define PRCM_ARMITVAL63TO32	(_PRCMU_BASE + 0x264)
+#define PRCM_ARMITVAL95TO64	(_PRCMU_BASE + 0x268)
+#define PRCM_ARMITVAL127TO96	(_PRCMU_BASE + 0x26C)
+
+#define PRCM_HOSTACCESS_REQ	(_PRCMU_BASE + 0x334)
+#define ARM_WAKEUP_MODEM	0x1
+
+#define PRCM_ARM_IT1_CLEAR	(_PRCMU_BASE + 0x48C)
+#define PRCM_ARM_IT1_VAL	(_PRCMU_BASE + 0x494)
+#define PRCM_HOLD_EVT		(_PRCMU_BASE + 0x174)
+
+#define PRCM_ITSTATUS0		(_PRCMU_BASE + 0x148)
+#define PRCM_ITSTATUS1		(_PRCMU_BASE + 0x150)
+#define PRCM_ITSTATUS2		(_PRCMU_BASE + 0x158)
+#define PRCM_ITSTATUS3		(_PRCMU_BASE + 0x160)
+#define PRCM_ITSTATUS4		(_PRCMU_BASE + 0x168)
+#define PRCM_ITSTATUS5		(_PRCMU_BASE + 0x484)
+#define PRCM_ITCLEAR5		(_PRCMU_BASE + 0x488)
+#define PRCM_ARMIT_MASKXP70_IT	(_PRCMU_BASE + 0x1018)
+
+/* System reset register */
+#define PRCM_APE_SOFTRST	(_PRCMU_BASE + 0x228)
+
+/* Level shifter and clamp control registers */
+#define PRCM_MMIP_LS_CLAMP_SET     (_PRCMU_BASE + 0x420)
+#define PRCM_MMIP_LS_CLAMP_CLR     (_PRCMU_BASE + 0x424)
+
+/* PRCMU clock/PLL/reset registers */
+#define PRCM_PLLDSI_FREQ           (_PRCMU_BASE + 0x500)
+#define PRCM_PLLDSI_ENABLE         (_PRCMU_BASE + 0x504)
+#define PRCM_LCDCLK_MGT            (_PRCMU_BASE + 0x044)
+#define PRCM_MCDECLK_MGT           (_PRCMU_BASE + 0x064)
+#define PRCM_HDMICLK_MGT           (_PRCMU_BASE + 0x058)
+#define PRCM_TVCLK_MGT             (_PRCMU_BASE + 0x07c)
+#define PRCM_DSI_PLLOUT_SEL        (_PRCMU_BASE + 0x530)
+#define PRCM_DSITVCLK_DIV          (_PRCMU_BASE + 0x52C)
+#define PRCM_APE_RESETN_SET        (_PRCMU_BASE + 0x1E4)
+#define PRCM_APE_RESETN_CLR        (_PRCMU_BASE + 0x1E8)
+
+/* ePOD and memory power signal control registers */
+#define PRCM_EPOD_C_SET            (_PRCMU_BASE + 0x410)
+#define PRCM_SRAM_LS_SLEEP         (_PRCMU_BASE + 0x304)
+
+/* Debug power control unit registers */
+#define PRCM_POWER_STATE_SET       (_PRCMU_BASE + 0x254)
+
+/* Miscellaneous unit registers */
+#define PRCM_DSI_SW_RESET          (_PRCMU_BASE + 0x324)
+
+#endif /* __MACH_PRCMU__REGS_H */
diff --git a/arch/arm/mach-ux500/include/mach/prcmu.h b/arch/arm/mach-ux500/include/mach/prcmu.h
new file mode 100644
index 0000000..549843f
--- /dev/null
+++ b/arch/arm/mach-ux500/include/mach/prcmu.h
@@ -0,0 +1,15 @@
+/*
+ * Copyright (C) STMicroelectronics 2009
+ * Copyright (C) ST-Ericsson SA 2010
+ *
+ * License Terms: GNU General Public License v2
+ *
+ * PRCMU f/w APIs
+ */
+#ifndef __MACH_PRCMU_H
+#define __MACH_PRCMU_H
+
+int prcmu_abb_read(u8 slave, u8 reg, u8 *value, u8 size);
+int prcmu_abb_write(u8 slave, u8 reg, u8 *value, u8 size);
+
+#endif /* __MACH_PRCMU_H */