aboutsummaryrefslogtreecommitdiffstats
path: root/arch/arm/mach-vexpress
diff options
context:
space:
mode:
authorMagnus Damm <magnus.damm@gmail.com>2010-11-16 01:03:34 +0100
committerRussell King <rmk+kernel@arm.linux.org.uk>2010-12-07 09:20:26 +0000
commitc91a2bd70a617a638e157a7e99d4b21ee0e7b1cf (patch)
tree3395cd7fe5d01b23632334c59900531ece444887 /arch/arm/mach-vexpress
parent5488324a6cbae617d103c42944827d82d8f5efd4 (diff)
downloadkernel_samsung_smdk4412-c91a2bd70a617a638e157a7e99d4b21ee0e7b1cf.zip
kernel_samsung_smdk4412-c91a2bd70a617a638e157a7e99d4b21ee0e7b1cf.tar.gz
kernel_samsung_smdk4412-c91a2bd70a617a638e157a7e99d4b21ee0e7b1cf.tar.bz2
ARM: 6480/1: Use shared GIC entry macros on Vexpress
Use the GIC demux code in asm/hardware/entry-macro-gic.S on the Versatile Express subarchitecture. Signed-off-by: Magnus Damm <damm@opensource.se> Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Diffstat (limited to 'arch/arm/mach-vexpress')
-rw-r--r--arch/arm/mach-vexpress/include/mach/entry-macro.S57
1 files changed, 1 insertions, 56 deletions
diff --git a/arch/arm/mach-vexpress/include/mach/entry-macro.S b/arch/arm/mach-vexpress/include/mach/entry-macro.S
index 20e9fb5..19d5ac8 100644
--- a/arch/arm/mach-vexpress/include/mach/entry-macro.S
+++ b/arch/arm/mach-vexpress/include/mach/entry-macro.S
@@ -1,4 +1,4 @@
-#include <asm/hardware/gic.h>
+#include <asm/hardware/entry-macro-gic.S>
.macro disable_fiq
.endm
@@ -10,58 +10,3 @@
.macro arch_ret_to_user, tmp1, tmp2
.endm
-
- /*
- * The interrupt numbering scheme is defined in the
- * interrupt controller spec. To wit:
- *
- * Interrupts 0-15 are IPI
- * 16-28 are reserved
- * 29-31 are local. We allow 30 to be used for the watchdog.
- * 32-1020 are global
- * 1021-1022 are reserved
- * 1023 is "spurious" (no interrupt)
- *
- * For now, we ignore all local interrupts so only return an interrupt if it's
- * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs.
- *
- * A simple read from the controller will tell us the number of the highest
- * priority enabled interrupt. We then just need to check whether it is in the
- * valid range for an IRQ (30-1020 inclusive).
- */
-
- .macro get_irqnr_and_base, irqnr, irqstat, base, tmp
- ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */
- ldr \tmp, =1021
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #29
- cmpcc \irqnr, \irqnr
- cmpne \irqnr, \tmp
- cmpcs \irqnr, \irqnr
- .endm
-
- /* We assume that irqstat (the raw value of the IRQ acknowledge
- * register) is preserved from the macro above.
- * If there is an IPI, we immediately signal end of interrupt on the
- * controller, since this requires the original irqstat value which
- * we won't easily be able to recreate later.
- */
-
- .macro test_for_ipi, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- cmp \irqnr, #16
- strcc \irqstat, [\base, #GIC_CPU_EOI]
- cmpcs \irqnr, \irqnr
- .endm
-
- /* As above, this assumes that irqstat and base are preserved.. */
-
- .macro test_for_ltirq, irqnr, irqstat, base, tmp
- bic \irqnr, \irqstat, #0x1c00
- mov \tmp, #0
- cmp \irqnr, #29
- moveq \tmp, #1
- streq \irqstat, [\base, #GIC_CPU_EOI]
- cmp \tmp, #0
- .endm
-