ARM i.MX ehci: factor out soc specific functions

Currently we have a mxc_initialize_usb_hw which is called on every
i.MX SoC. This function dispatches the different SoC types, which
is quite ugly. This patch moves the SoC specific USB initialization
to their correspondive mach directories.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>

2 files changed, 16 insertions, 333 deletions

diff --git a/arch/arm/plat-mxc/ehci.c b/arch/arm/plat-mxc/ehci.c
index 8772ce3..06fb3a4 100644
--- a/arch/arm/plat-mxc/ehci.c
+++ b/arch/arm/plat-mxc/ehci.c
@@ -14,352 +14,29 @@
  */
 
 #include <linux/platform_device.h>
-#include <linux/io.h>
 
 #include <mach/hardware.h>
 #include <mach/mxc_ehci.h>
 
-#define USBCTRL_OTGBASE_OFFSET	0x600
-
-#define MX31_OTG_SIC_SHIFT	29
-#define MX31_OTG_SIC_MASK	(0x3 << MX31_OTG_SIC_SHIFT)
-#define MX31_OTG_PM_BIT		(1 << 24)
-
-#define MX31_H2_SIC_SHIFT	21
-#define MX31_H2_SIC_MASK	(0x3 << MX31_H2_SIC_SHIFT)
-#define MX31_H2_PM_BIT		(1 << 16)
-#define MX31_H2_DT_BIT		(1 << 5)
-
-#define MX31_H1_SIC_SHIFT	13
-#define MX31_H1_SIC_MASK	(0x3 << MX31_H1_SIC_SHIFT)
-#define MX31_H1_PM_BIT		(1 << 8)
-#define MX31_H1_DT_BIT		(1 << 4)
-
-#define MX35_OTG_SIC_SHIFT	29
-#define MX35_OTG_SIC_MASK	(0x3 << MX35_OTG_SIC_SHIFT)
-#define MX35_OTG_PM_BIT		(1 << 24)
-
-#define MX35_H1_SIC_SHIFT	21
-#define MX35_H1_SIC_MASK	(0x3 << MX35_H1_SIC_SHIFT)
-#define MX35_H1_PM_BIT		(1 << 8)
-#define MX35_H1_IPPUE_UP_BIT	(1 << 7)
-#define MX35_H1_IPPUE_DOWN_BIT	(1 << 6)
-#define MX35_H1_TLL_BIT		(1 << 5)
-#define MX35_H1_USBTE_BIT	(1 << 4)
-
-#define MXC_OTG_OFFSET		0
-#define MXC_H1_OFFSET		0x200
-#define MXC_H2_OFFSET		0x400
-
-/* USB_CTRL */
-#define MXC_OTG_UCTRL_OWIE_BIT		(1 << 27)	/* OTG wakeup intr enable */
-#define MXC_OTG_UCTRL_OPM_BIT		(1 << 24)	/* OTG power mask */
-#define MXC_H1_UCTRL_H1UIE_BIT		(1 << 12)	/* Host1 ULPI interrupt enable */
-#define MXC_H1_UCTRL_H1WIE_BIT		(1 << 11)	/* HOST1 wakeup intr enable */
-#define MXC_H1_UCTRL_H1PM_BIT		(1 <<  8)		/* HOST1 power mask */
-
-/* USB_PHY_CTRL_FUNC */
-#define MXC_OTG_PHYCTRL_OC_DIS_BIT	(1 << 8)	/* OTG Disable Overcurrent Event */
-#define MXC_H1_OC_DIS_BIT			(1 << 5)	/* UH1 Disable Overcurrent Event */
-
-/* USBH2CTRL */
-#define MXC_H2_UCTRL_H2UIE_BIT		(1 << 8)
-#define MXC_H2_UCTRL_H2WIE_BIT		(1 << 7)
-#define MXC_H2_UCTRL_H2PM_BIT		(1 << 4)
-
-#define MXC_USBCMD_OFFSET			0x140
-
-/* USBCMD */
-#define MXC_UCMD_ITC_NO_THRESHOLD_MASK	(~(0xff << 16))	/* Interrupt Threshold Control */
-
 int mxc_initialize_usb_hw(int port, unsigned int flags)
 {
-	unsigned int v;
 #if defined(CONFIG_SOC_IMX25)
-	if (cpu_is_mx25()) {
-		v = readl(MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX35_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX35_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX35_H1_TLL_BIT;
-
-			if (flags & MXC_EHCI_INTERNAL_PHY)
-				v |= MX35_H1_USBTE_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_DOWN)
-				v |= MX35_H1_IPPUE_DOWN_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_UP)
-				v |= MX35_H1_IPPUE_UP_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX25_IO_ADDRESS(MX25_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
+	if (cpu_is_mx25())
+		return mx25_initialize_usb_hw(port, flags);
 #endif /* if defined(CONFIG_SOC_IMX25) */
 #if defined(CONFIG_ARCH_MX3)
-	if (cpu_is_mx31()) {
-		v = readl(MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX31_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H1_DT_BIT;
-
-			break;
-		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H2_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H2_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H2_DT_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX31_IO_ADDRESS(MX31_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
-
-	if (cpu_is_mx35()) {
-		v = readl(MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX35_OTG_SIC_MASK | MX35_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX35_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_OTG_PM_BIT;
-
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX35_H1_SIC_MASK | MX35_H1_PM_BIT | MX35_H1_TLL_BIT |
-				MX35_H1_USBTE_BIT | MX35_H1_IPPUE_DOWN_BIT | MX35_H1_IPPUE_UP_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX35_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX35_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX35_H1_TLL_BIT;
-
-			if (flags & MXC_EHCI_INTERNAL_PHY)
-				v |= MX35_H1_USBTE_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_DOWN)
-				v |= MX35_H1_IPPUE_DOWN_BIT;
-
-			if (flags & MXC_EHCI_IPPUE_UP)
-				v |= MX35_H1_IPPUE_UP_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-
-		writel(v, MX35_IO_ADDRESS(MX35_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
+	if (cpu_is_mx31())
+		return mx31_initialize_usb_hw(port, flags);
+	if (cpu_is_mx35())
+		return mx35_initialize_usb_hw(port, flags);
 #endif /* CONFIG_ARCH_MX3 */
 #ifdef CONFIG_MACH_MX27
-	if (cpu_is_mx27()) {
-		/* On i.MX27 we can use the i.MX31 USBCTRL bits, they
-		 * are identical
-		 */
-		v = readl(MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		switch (port) {
-		case 0:	/* OTG port */
-			v &= ~(MX31_OTG_SIC_MASK | MX31_OTG_PM_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-					<< MX31_OTG_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_OTG_PM_BIT;
-			break;
-		case 1: /* H1 port */
-			v &= ~(MX31_H1_SIC_MASK | MX31_H1_PM_BIT | MX31_H1_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H1_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H1_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H1_DT_BIT;
-
-			break;
-		case 2:	/* H2 port */
-			v &= ~(MX31_H2_SIC_MASK | MX31_H2_PM_BIT | MX31_H2_DT_BIT);
-			v |= (flags & MXC_EHCI_INTERFACE_MASK)
-						<< MX31_H2_SIC_SHIFT;
-			if (!(flags & MXC_EHCI_POWER_PINS_ENABLED))
-				v |= MX31_H2_PM_BIT;
-
-			if (!(flags & MXC_EHCI_TTL_ENABLED))
-				v |= MX31_H2_DT_BIT;
-
-			break;
-		default:
-			return -EINVAL;
-		}
-		writel(v, MX27_IO_ADDRESS(MX27_USB_BASE_ADDR +
-				     USBCTRL_OTGBASE_OFFSET));
-		return 0;
-	}
+	if (cpu_is_mx27())
+		return mx27_initialize_usb_hw(port, flags);
 #endif /* CONFIG_MACH_MX27 */
 #ifdef CONFIG_SOC_IMX51
-	if (cpu_is_mx51()) {
-		void __iomem *usb_base;
-		void __iomem *usbotg_base;
-		void __iomem *usbother_base;
-		int ret = 0;
-
-		usb_base = ioremap(MX51_OTG_BASE_ADDR, SZ_4K);
-		if (!usb_base) {
-			printk(KERN_ERR "%s(): ioremap failed\n", __func__);
-			return -ENOMEM;
-		}
-
-		switch (port) {
-		case 0:	/* OTG port */
-			usbotg_base = usb_base + MXC_OTG_OFFSET;
-			break;
-		case 1:	/* Host 1 port */
-			usbotg_base = usb_base + MXC_H1_OFFSET;
-			break;
-		case 2: /* Host 2 port */
-			usbotg_base = usb_base + MXC_H2_OFFSET;
-			break;
-		default:
-			printk(KERN_ERR"%s no such port %d\n", __func__, port);
-			ret = -ENOENT;
-			goto error;
-		}
-		usbother_base = usb_base + MX5_USBOTHER_REGS_OFFSET;
-
-		switch (port) {
-		case 0:	/*OTG port */
-			if (flags & MXC_EHCI_INTERNAL_PHY) {
-				v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-				if (flags & MXC_EHCI_POWER_PINS_ENABLED) {
-					/* OC/USBPWR is not used */
-					v |= MXC_OTG_PHYCTRL_OC_DIS_BIT;
-				} else {
-					/* OC/USBPWR is used */
-					v &= ~MXC_OTG_PHYCTRL_OC_DIS_BIT;
-				}
-				__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-				v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-				if (flags & MXC_EHCI_WAKEUP_ENABLED)
-					v |= MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup enable */
-				else
-					v &= ~MXC_OTG_UCTRL_OWIE_BIT;/* OTG wakeup disable */
-				if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-					v |= MXC_OTG_UCTRL_OPM_BIT;
-				else
-					v &= ~MXC_OTG_UCTRL_OPM_BIT;
-				__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-			}
-			break;
-		case 1:	/* Host 1 */
-			/*Host ULPI */
-			v = __raw_readl(usbother_base + MXC_USBCTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-				/* HOST1 wakeup/ULPI intr enable */
-				v |= (MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-			} else {
-				/* HOST1 wakeup/ULPI intr disable */
-				v &= ~(MXC_H1_UCTRL_H1WIE_BIT | MXC_H1_UCTRL_H1UIE_BIT);
-			}
-
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-			else
-				v |= MXC_H1_UCTRL_H1PM_BIT; /* HOST1 power mask used*/
-			__raw_writel(v, usbother_base + MXC_USBCTRL_OFFSET);
-
-			v = __raw_readl(usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H1_OC_DIS_BIT; /* OC is used */
-			else
-				v |= MXC_H1_OC_DIS_BIT; /* OC is not used */
-			__raw_writel(v, usbother_base + MXC_USB_PHY_CTR_FUNC_OFFSET);
-
-			v = __raw_readl(usbotg_base + MXC_USBCMD_OFFSET);
-			if (flags & MXC_EHCI_ITC_NO_THRESHOLD)
-				/* Interrupt Threshold Control:Immediate (no threshold) */
-				v &= MXC_UCMD_ITC_NO_THRESHOLD_MASK;
-			__raw_writel(v, usbotg_base + MXC_USBCMD_OFFSET);
-			break;
-		case 2: /* Host 2 ULPI */
-			v = __raw_readl(usbother_base + MXC_USBH2CTRL_OFFSET);
-			if (flags & MXC_EHCI_WAKEUP_ENABLED) {
-				/* HOST1 wakeup/ULPI intr enable */
-				v |= (MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-			} else {
-				/* HOST1 wakeup/ULPI intr disable */
-				v &= ~(MXC_H2_UCTRL_H2WIE_BIT | MXC_H2_UCTRL_H2UIE_BIT);
-			}
-
-			if (flags & MXC_EHCI_POWER_PINS_ENABLED)
-				v &= ~MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-			else
-				v |= MXC_H2_UCTRL_H2PM_BIT; /* HOST2 power mask used*/
-			__raw_writel(v, usbother_base + MXC_USBH2CTRL_OFFSET);
-			break;
-		}
-
-error:
-		iounmap(usb_base);
-		return ret;
-	}
+	if (cpu_is_mx51())
+		return mx51_initialize_usb_hw(port, flags);
 #endif
 	printk(KERN_WARNING
 		"%s() unable to setup USBCONTROL for this CPU\n", __func__);
diff --git a/arch/arm/plat-mxc/include/mach/mxc_ehci.h b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
index a523a40..7e555a1 100644
--- a/arch/arm/plat-mxc/include/mach/mxc_ehci.h
+++ b/arch/arm/plat-mxc/include/mach/mxc_ehci.h
@@ -50,5 +50,11 @@ struct mxc_usbh_platform_data {
 
 int mxc_initialize_usb_hw(int port, unsigned int flags);
 
+int mx51_initialize_usb_hw(int port, unsigned int flags);
+int mx25_initialize_usb_hw(int port, unsigned int flags);
+int mx31_initialize_usb_hw(int port, unsigned int flags);
+int mx35_initialize_usb_hw(int port, unsigned int flags);
+int mx27_initialize_usb_hw(int port, unsigned int flags);
+
 #endif /* __INCLUDE_ASM_ARCH_MXC_EHCI_H */