[PATCH] CRIS update: new subarchitecture v32

New CRIS sub architecture named v32.

From: Dave Jones <davej@redhat.com>

	Fix swapped kmalloc args

Signed-off-by: Mikael Starvik <starvik@axis.com>
Signed-off-by: Dave Jones <davej@redhat.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 820 insertions, 0 deletions

diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
new file mode 100644
index 0000000..a8ed55e
--- /dev/null
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -0,0 +1,820 @@
+/*
+ *  Copyright (C) 2000-2003 Axis Communications AB
+ *
+ *  Authors:	Bjorn Wesen (bjornw@axis.com)
+ *              Tobias Anderberg (tobiasa@axis.com), CRISv32 port.
+ *
+ * Code for the system-call and fault low-level handling routines.
+ *
+ * NOTE: This code handles signal-recognition, which happens every time
+ * after a timer-interrupt and after each system call.
+ *
+ * Stack layout in 'ret_from_system_call':
+ * 	ptrace needs to have all regs on the stack.
+ *	if the order here is changed, it needs to be
+ *	updated in fork.c:copy_process, signal.c:do_signal,
+ *	ptrace.c and ptrace.h
+ *
+ */
+
+#include <linux/config.h>
+#include <linux/linkage.h>
+#include <linux/sys.h>
+#include <asm/unistd.h>
+#include <asm/errno.h>
+#include <asm/thread_info.h>
+#include <asm/arch/offset.h>
+
+#include <asm/arch/hwregs/asm/reg_map_asm.h>
+#include <asm/arch/hwregs/asm/intr_vect_defs_asm.h>
+
+	;; Exported functions.
+	.globl system_call
+	.globl ret_from_intr
+	.globl ret_from_fork
+	.globl resume
+	.globl multiple_interrupt
+	.globl nmi_interrupt
+	.globl spurious_interrupt
+	.globl do_sigtrap
+	.globl gdb_handle_exception
+	.globl sys_call_table
+
+	; Check if preemptive kernel scheduling should be done.
+#ifdef CONFIG_PREEMPT
+_resume_kernel:
+	di
+	; Load current task struct.
+	movs.w	-8192, $r0		; THREAD_SIZE = 8192
+	and.d	$sp, $r0
+
+	addoq	+TI_preempt_count, $r0, $acr
+	move.d	[$acr], $r10		; Preemption disabled?
+	bne	_Rexit
+	nop
+
+_need_resched:
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r10
+	btstq	TIF_NEED_RESCHED, $r10	; Check if need_resched is set.
+	bpl	_Rexit
+	nop
+
+	; Do preemptive kernel scheduling.
+	jsr	preempt_schedule_irq
+	nop
+
+	; Load new task struct.
+	movs.w	-8192, $r0		; THREAD_SIZE = 8192.
+	and.d	$sp, $r0
+
+	; One more time with new task.
+	ba	_need_resched
+	nop
+#else
+#define _resume_kernel _Rexit
+#endif
+
+	; Called at exit from fork. schedule_tail must be called to drop
+	; spinlock if CONFIG_PREEMPT.
+ret_from_fork:
+	jsr schedule_tail
+	nop
+	ba  ret_from_sys_call
+	nop
+
+ret_from_intr:
+	;; Check for resched if preemptive kernel, or if we're going back to
+	;; user-mode. This test matches the user_regs(regs) macro. Don't simply
+	;; test CCS since that doesn't necessarily reflect what mode we'll
+	;; return into.
+	addoq	+PT_ccs, $sp, $acr
+	move.d	[$acr], $r0
+	btstq	16, $r0			; User-mode flag.
+	bpl	_resume_kernel
+
+	; Note that di below is in delay slot.
+
+_resume_userspace:
+	di			; So need_resched and sigpending don't change.
+
+	movs.w	-8192, $r0		; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	addoq	+TI_flags, $r0, $acr	; current->work
+	move.d	[$acr], $r10
+	and.d	_TIF_WORK_MASK, $r10	; Work to be done on return?
+	bne	_work_pending
+	nop
+	ba	_Rexit
+	nop
+
+	;; The system_call is called by a BREAK instruction, which looks pretty
+	;; much like any other exception.
+	;;
+	;; System calls can't be made from interrupts but we still stack ERP
+	;; to have a complete stack frame.
+	;;
+	;; In r9 we have the wanted syscall number. Arguments come in r10,r11,r12,
+	;; r13,mof,srp
+	;;
+	;; This function looks on the _surface_ like spaghetti programming, but it's
+	;; really designed so that the fast-path does not force cache-loading of
+	;; non-used instructions. Only the non-common cases cause the outlined code
+	;; to run..
+
+system_call:
+	;; Stack-frame similar to the irq heads, which is reversed in
+	;; ret_from_sys_call.
+	subq	12, $sp		; Skip EXS, EDA.
+	move	$erp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	ei			; Allow IRQs while handling system call
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	subq	14*4, $sp	; Make room for R0-R13.
+	movem	$r13, [$sp]	; Push R0-R13
+	subq	4, $sp
+	move.d	$r10, [$sp]	; Push orig_r10.
+
+; Set S-bit when kernel debugging to keep hardware breakpoints active.
+#ifdef CONFIG_ETRAX_KGDB
+	move $ccs, $r0
+	or.d (1<<9), $r0
+	move $r0, $ccs
+#endif
+
+	movs.w	-ENOSYS, $r0
+	addoq	+PT_r10, $sp, $acr
+	move.d	$r0, [$acr]
+
+	;; Check if this process is syscall-traced.
+	movs.w	-8192, $r0	; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r0
+	btstq	TIF_SYSCALL_TRACE, $r0
+	bmi	_syscall_trace_entry
+	nop
+
+_syscall_traced:
+	;; Check for sanity in the requested syscall number.
+	cmpu.w	NR_syscalls, $r9
+	bhs	ret_from_sys_call
+	lslq	2, $r9		;  Multiply by 4, in the delay slot.
+
+	;; The location on the stack for the register structure is passed as a
+	;; seventh argument. Some system calls need this.
+	move.d  $sp, $r0
+	subq	4, $sp
+	move.d	$r0, [$sp]
+
+	;; The registers carrying parameters (R10-R13) are intact. The optional
+	;; fifth and sixth parameters is in MOF and SRP respectivly. Put them
+	;; back on the stack.
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+
+	;; Actually to the system call.
+	addo.d	+sys_call_table, $r9, $acr
+	move.d	[$acr], $acr
+	jsr	$acr
+	nop
+
+	addq	3*4, $sp		; Pop the mof, srp and regs parameters.
+	addoq	+PT_r10, $sp, $acr
+	move.d	$r10, [$acr]		; Save the return value.
+
+	moveq	1, $r9			; "Parameter" to ret_from_sys_call to
+					; show it was a sys call.
+
+	;; Fall through into ret_from_sys_call to return.
+
+ret_from_sys_call:
+	;; R9 is a parameter:
+	;;  >= 1 from syscall
+	;;     0 from irq
+
+	;; Get the current task-struct pointer.
+	movs.w	-8192, $r0	; THREAD_SIZE == 8192
+	and.d	$sp, $r0
+
+	di		; Make sure need_resched and sigpending don't change.
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r1
+	and.d	_TIF_ALLWORK_MASK, $r1
+	bne	_syscall_exit_work
+	nop
+
+_Rexit:
+	;; This epilogue MUST match the prologues in multiple_interrupt, irq.h
+	;; and ptregs.h.
+	addq	4, $sp		; Skip orig_r10.
+	movem	[$sp+], $r13	; Registers R0-R13.
+	move.d	[$sp+], $acr
+	move	[$sp], $srs
+	addq	4, $sp
+	move	[$sp+], $mof
+	move	[$sp+], $spc
+	move	[$sp+], $ccs
+	move	[$sp+], $srp
+	move	[$sp+], $erp
+	addq    8, $sp		; Skip EXS, EDA.
+	jump	$erp
+	rfe			; Restore condition code stack in delay-slot.
+
+	;; We get here after doing a syscall if extra work might need to be done
+	;; perform syscall exit tracing if needed.
+
+_syscall_exit_work:
+	;; R0 contains current at this point and irq's are disabled.
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r1
+	btstq	TIF_SYSCALL_TRACE, $r1
+	bpl	_work_pending
+	nop
+	ei
+	move.d	$r9, $r1		; Preserve R9.
+	jsr	do_syscall_trace
+	nop
+	move.d	$r1, $r9
+	ba	_resume_userspace
+	nop
+
+_work_pending:
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r10
+	btstq	TIF_NEED_RESCHED, $r10	; Need resched?
+	bpl	_work_notifysig		; No, must be signal/notify.
+	nop
+
+_work_resched:
+	move.d	$r9, $r1		; Preserve R9.
+	jsr	schedule
+	nop
+	move.d	$r1, $r9
+	di
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r1
+	and.d	_TIF_WORK_MASK, $r1	; Ignore sycall trace counter.
+	beq	_Rexit
+	nop
+	btstq	TIF_NEED_RESCHED, $r1
+	bmi	_work_resched		; current->work.need_resched.
+	nop
+
+_work_notifysig:
+	;; Deal with pending signals and notify-resume requests.
+
+	addoq	+TI_flags, $r0, $acr
+	move.d	[$acr], $r13		; The thread_info_flags parameter.
+	move.d	$r9, $r10		; do_notify_resume syscall/irq param.
+	moveq	0, $r11			; oldset param - 0 in this case.
+	move.d	$sp, $r12		; The regs param.
+	jsr	do_notify_resume
+	nop
+
+	ba _Rexit
+	nop
+
+	;; We get here as a sidetrack when we've entered a syscall with the
+	;; trace-bit set. We need to call do_syscall_trace and then continue
+	;; with the call.
+
+_syscall_trace_entry:
+	;; PT_r10 in the frame contains -ENOSYS as required, at this point.
+
+	jsr	do_syscall_trace
+	nop
+
+	;; Now re-enter the syscall code to do the syscall itself. We need to
+	;; restore R9 here to contain the wanted syscall, and the other
+	;; parameter-bearing registers.
+	addoq	+PT_r9, $sp, $acr
+	move.d	[$acr], $r9
+	addoq	+PT_orig_r10, $sp, $acr
+	move.d	[$acr], $r10		; PT_r10 is already -ENOSYS.
+	addoq	+PT_r11, $sp, $acr
+	move.d	[$acr], $r11
+	addoq	+PT_r12, $sp, $acr
+	move.d	[$acr], $r12
+	addoq	+PT_r13, $sp, $acr
+	move.d	[$acr], $r13
+	addoq	+PT_mof, $sp, $acr
+	move	[$acr], $mof
+	addoq	+PT_srp, $sp, $acr
+	move	[$acr], $srp
+
+	ba	_syscall_traced
+	nop
+
+	;; Resume performs the actual task-switching, by switching stack
+	;; pointers. Input arguments are:
+	;;
+	;; R10 = prev
+	;; R11 = next
+	;; R12 = thread offset in task struct.
+	;;
+	;; Returns old current in R10.
+
+resume:
+	subq	4, $sp
+	move	$srp, [$sp]		; Keep old/new PC on the stack.
+	add.d	$r12, $r10		; R10 = current tasks tss.
+	addoq	+THREAD_ccs, $r10, $acr
+	move	$ccs, [$acr]		; Save IRQ enable state.
+	di
+
+	addoq	+THREAD_usp, $r10, $acr
+	move	$usp, [$acr]		; Save user-mode stackpointer.
+
+	;; See copy_thread for the reason why register R9 is saved.
+	subq	10*4, $sp
+	movem	$r9, [$sp]		; Save non-scratch registers and R9.
+
+	addoq	+THREAD_ksp, $r10, $acr
+	move.d	$sp, [$acr]		; Save kernel SP for old task.
+
+	move.d	$sp, $r10		; Return last running task in R10.
+	and.d   -8192, $r10		; Get thread_info from stackpointer.
+	addoq	+TI_task, $r10, $acr
+	move.d	[$acr], $r10		; Get task.
+	add.d	$r12, $r11		; Find the new tasks tss.
+	addoq	+THREAD_ksp, $r11, $acr
+	move.d	[$acr], $sp		; Switch to new stackframe.
+	movem	[$sp+], $r9		; Restore non-scratch registers and R9.
+
+	addoq	+THREAD_usp, $r11, $acr
+	move	[$acr], $usp		; Restore user-mode stackpointer.
+
+	addoq	+THREAD_ccs, $r11, $acr
+	move	[$acr], $ccs		; Restore IRQ enable status.
+	move.d	[$sp+], $acr
+	jump	$acr			; Restore PC.
+	nop
+
+nmi_interrupt:
+
+;; If we receive a watchdog interrupt while it is not expected, then set
+;; up a canonical frame and dump register contents before dying.
+
+	;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
+	subq	12, $sp		;  Skip EXS, EDA.
+	move	$nrp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	subq	14*4, $sp		; Make room for R0-R13.
+	movem	$r13, [$sp]		; Push R0-R13.
+	subq	4, $sp
+	move.d	$r10, [$sp]		; Push orig_r10.
+	move.d  REG_ADDR(intr_vect, regi_irq, r_nmi), $r0
+	move.d  [$r0], $r0
+	btstq	REG_BIT(intr_vect, r_nmi, watchdog), $r0
+	bpl     1f
+	nop
+	jsr 	handle_watchdog_bite	; In time.c.
+        move.d	$sp, $r10		; Pointer to registers
+1:	btstq	REG_BIT(intr_vect, r_nmi, ext), $r0
+	bpl     1f
+	nop
+	jsr	handle_nmi
+	move.d	$sp, $r10		; Pointer to registers
+1:	addq    4, $sp			; Skip orig_r10
+	movem   [$sp+], $r13
+	move.d  [$sp+], $acr
+	move    [$sp], $srs
+	addq    4, $sp
+	move    [$sp+], $mof
+	move    [$sp+], $spc
+	move    [$sp+], $ccs
+	move	[$sp+], $srp
+	move	[$sp+], $nrp
+	addq    8, $sp			; Skip EXS, EDA.
+	jump    $nrp
+	rfn
+
+	.comm	cause_of_death, 4	;; Don't declare this anywhere.
+
+spurious_interrupt:
+	di
+	jump hard_reset_now
+	nop
+
+	;; This handles the case when multiple interrupts arrive at the same
+	;; time. Jump to the first set interrupt bit in a priotiry fashion. The
+	;; hardware will call the unserved interrupts after the handler
+	;; finishes.
+multiple_interrupt:
+	;; This prologue MUST match the one in irq.h and the struct in ptregs.h!
+	subq	12, $sp		; Skip EXS, EDA.
+	move	$erp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	subq	14*4, $sp	; Make room for R0-R13.
+	movem	$r13, [$sp]	; Push R0-R13.
+	subq	4, $sp
+	move.d	$r10, [$sp]	; Push orig_r10.
+
+; Set S-bit when kernel debugging to keep hardware breakpoints active.
+#ifdef CONFIG_ETRAX_KGDB
+	move $ccs, $r0
+	or.d (1<<9), $r0
+	move $r0, $ccs
+#endif
+
+	jsr	crisv32_do_multiple
+	move.d	$sp, $r10
+	jump    ret_from_intr
+	nop
+
+do_sigtrap:
+	;; Sigtraps the process that executed the BREAK instruction. Creates a
+	;; frame that Rexit expects.
+	subq	4, $sp
+	move    $eda, [$sp]
+	subq    4, $sp
+	move    $exs, [$sp]
+	subq    4, $sp
+	move	$erp, [$sp]
+	subq	4, $sp
+	move	$srp, [$sp]
+	subq	4, $sp
+	move	$ccs, [$sp]
+	subq	4, $sp
+	move	$spc, [$sp]
+	subq	4, $sp
+	move	$mof, [$sp]
+	subq	4, $sp
+	move	$srs, [$sp]
+	subq	4, $sp
+	move.d	$acr, [$sp]
+	di				; Need to disable irq's at this point.
+	subq	14*4, $sp		; Make room for r0-r13.
+	movem	$r13, [$sp]		; Push the r0-r13 registers.
+	subq	4, $sp
+	move.d	$r10, [$sp]		; Push orig_r10.
+
+	movs.w	-8192, $r9		; THREAD_SIZE == 8192
+	and.d	$sp, $r9
+
+	;; thread_info as first parameter
+	move.d  $r9, $r10
+	moveq	5, $r11			; SIGTRAP as second argument.
+	jsr	ugdb_trap_user
+	nop
+	jump	ret_from_intr		; Use the return routine for interrupts.
+	nop
+
+gdb_handle_exception:
+	subq	4, $sp
+	move.d	$r0, [$sp]
+#ifdef CONFIG_ETRAX_KGDB
+	move	$ccs, $r0		; U-flag not affected by previous insns.
+	btstq	16, $r0			; Test the U-flag.
+	bmi	_ugdb_handle_exception	; Go to user mode debugging.
+	nop				; Empty delay-slot (cannot pop R0 here).
+	ba	kgdb_handle_exception	; Go to kernel debugging.
+	move.d	[$sp+], $r0		; Restore R0 in delay slot.
+#endif
+
+_ugdb_handle_exception:
+	ba	do_sigtrap		; SIGTRAP the offending process.
+	move.d	[$sp+], $r0		; Restore R0 in delay slot.
+
+	.data
+
+	.section .rodata,"a"
+sys_call_table:
+	.long sys_restart_syscall	; 0 - old "setup()" system call, used
+					; for restarting.
+	.long sys_exit
+	.long sys_fork
+	.long sys_read
+	.long sys_write
+	.long sys_open		/* 5 */
+	.long sys_close
+	.long sys_waitpid
+	.long sys_creat
+	.long sys_link
+	.long sys_unlink	/* 10 */
+	.long sys_execve
+	.long sys_chdir
+	.long sys_time
+	.long sys_mknod
+	.long sys_chmod		/* 15 */
+	.long sys_lchown16
+	.long sys_ni_syscall	/* old break syscall holder */
+	.long sys_stat
+	.long sys_lseek
+	.long sys_getpid	/* 20 */
+	.long sys_mount
+	.long sys_oldumount
+	.long sys_setuid16
+	.long sys_getuid16
+	.long sys_stime		/* 25 */
+	.long sys_ptrace
+	.long sys_alarm
+	.long sys_fstat
+	.long sys_pause
+	.long sys_utime		/* 30 */
+	.long sys_ni_syscall	/* old stty syscall holder */
+	.long sys_ni_syscall	/* old gtty syscall holder */
+	.long sys_access
+	.long sys_nice
+	.long sys_ni_syscall	/* 35  old ftime syscall holder */
+	.long sys_sync
+	.long sys_kill
+	.long sys_rename
+	.long sys_mkdir
+	.long sys_rmdir		/* 40 */
+	.long sys_dup
+	.long sys_pipe
+	.long sys_times
+	.long sys_ni_syscall	/* old prof syscall holder */
+	.long sys_brk		/* 45 */
+	.long sys_setgid16
+	.long sys_getgid16
+	.long sys_signal
+	.long sys_geteuid16
+	.long sys_getegid16	/* 50 */
+	.long sys_acct
+	.long sys_umount	/* recycled never used phys( */
+	.long sys_ni_syscall	/* old lock syscall holder */
+	.long sys_ioctl
+	.long sys_fcntl		/* 55 */
+	.long sys_ni_syscall	/* old mpx syscall holder */
+	.long sys_setpgid
+	.long sys_ni_syscall	/* old ulimit syscall holder */
+	.long sys_ni_syscall	/* old sys_olduname holder */
+	.long sys_umask		/* 60 */
+	.long sys_chroot
+	.long sys_ustat
+	.long sys_dup2
+	.long sys_getppid
+	.long sys_getpgrp	/* 65 */
+	.long sys_setsid
+	.long sys_sigaction
+	.long sys_sgetmask
+	.long sys_ssetmask
+	.long sys_setreuid16	/* 70 */
+	.long sys_setregid16
+	.long sys_sigsuspend
+	.long sys_sigpending
+	.long sys_sethostname
+	.long sys_setrlimit	/* 75 */
+	.long sys_old_getrlimit
+	.long sys_getrusage
+	.long sys_gettimeofday
+	.long sys_settimeofday
+	.long sys_getgroups16	/* 80 */
+	.long sys_setgroups16
+	.long sys_select	/* was old_select in Linux/E100 */
+	.long sys_symlink
+	.long sys_lstat
+	.long sys_readlink	/* 85 */
+	.long sys_uselib
+	.long sys_swapon
+	.long sys_reboot
+	.long old_readdir
+	.long old_mmap		/* 90 */
+	.long sys_munmap
+	.long sys_truncate
+	.long sys_ftruncate
+	.long sys_fchmod
+	.long sys_fchown16	/* 95 */
+	.long sys_getpriority
+	.long sys_setpriority
+	.long sys_ni_syscall	/* old profil syscall holder */
+	.long sys_statfs
+	.long sys_fstatfs	/* 100 */
+	.long sys_ni_syscall	/* sys_ioperm in i386 */
+	.long sys_socketcall
+	.long sys_syslog
+	.long sys_setitimer
+	.long sys_getitimer	/* 105 */
+	.long sys_newstat
+	.long sys_newlstat
+	.long sys_newfstat
+	.long sys_ni_syscall	/* old sys_uname holder */
+	.long sys_ni_syscall	/* sys_iopl in i386 */
+	.long sys_vhangup
+	.long sys_ni_syscall	/* old "idle" system call */
+	.long sys_ni_syscall	/* vm86old in i386 */
+	.long sys_wait4
+	.long sys_swapoff	/* 115 */
+	.long sys_sysinfo
+	.long sys_ipc
+	.long sys_fsync
+	.long sys_sigreturn
+	.long sys_clone		/* 120 */
+	.long sys_setdomainname
+	.long sys_newuname
+	.long sys_ni_syscall	/* sys_modify_ldt */
+	.long sys_adjtimex
+	.long sys_mprotect	/* 125 */
+	.long sys_sigprocmask
+	.long sys_ni_syscall	/* old "create_module" */
+	.long sys_init_module
+	.long sys_delete_module
+	.long sys_ni_syscall	/* 130:	old "get_kernel_syms" */
+	.long sys_quotactl
+	.long sys_getpgid
+	.long sys_fchdir
+	.long sys_bdflush
+	.long sys_sysfs		/* 135 */
+	.long sys_personality
+	.long sys_ni_syscall	/* for afs_syscall */
+	.long sys_setfsuid16
+	.long sys_setfsgid16
+	.long sys_llseek	/* 140 */
+	.long sys_getdents
+	.long sys_select
+	.long sys_flock
+	.long sys_msync
+	.long sys_readv		/* 145 */
+	.long sys_writev
+	.long sys_getsid
+	.long sys_fdatasync
+	.long sys_sysctl
+	.long sys_mlock		/* 150 */
+	.long sys_munlock
+	.long sys_mlockall
+	.long sys_munlockall
+	.long sys_sched_setparam
+	.long sys_sched_getparam	/* 155 */
+	.long sys_sched_setscheduler
+	.long sys_sched_getscheduler
+	.long sys_sched_yield
+	.long sys_sched_get_priority_max
+	.long sys_sched_get_priority_min	/* 160 */
+	.long sys_sched_rr_get_interval
+	.long sys_nanosleep
+	.long sys_mremap
+	.long sys_setresuid16
+	.long sys_getresuid16	/* 165 */
+	.long sys_ni_syscall	/* sys_vm86 */
+	.long sys_ni_syscall	/* Old sys_query_module */
+	.long sys_poll
+	.long sys_nfsservctl
+	.long sys_setresgid16	/* 170 */
+	.long sys_getresgid16
+	.long sys_prctl
+	.long sys_rt_sigreturn
+	.long sys_rt_sigaction
+	.long sys_rt_sigprocmask	/* 175 */
+	.long sys_rt_sigpending
+	.long sys_rt_sigtimedwait
+	.long sys_rt_sigqueueinfo
+	.long sys_rt_sigsuspend
+	.long sys_pread64	/* 180 */
+	.long sys_pwrite64
+	.long sys_chown16
+	.long sys_getcwd
+	.long sys_capget
+	.long sys_capset	/* 185 */
+	.long sys_sigaltstack
+	.long sys_sendfile
+	.long sys_ni_syscall	/* streams1 */
+	.long sys_ni_syscall	/* streams2 */
+	.long sys_vfork		/* 190 */
+	.long sys_getrlimit
+	.long sys_mmap2
+	.long sys_truncate64
+	.long sys_ftruncate64
+	.long sys_stat64	/* 195 */
+	.long sys_lstat64
+	.long sys_fstat64
+	.long sys_lchown
+	.long sys_getuid
+	.long sys_getgid	/* 200 */
+	.long sys_geteuid
+	.long sys_getegid
+	.long sys_setreuid
+	.long sys_setregid
+	.long sys_getgroups	/* 205 */
+	.long sys_setgroups
+	.long sys_fchown
+	.long sys_setresuid
+	.long sys_getresuid
+	.long sys_setresgid	/* 210 */
+	.long sys_getresgid
+	.long sys_chown
+	.long sys_setuid
+	.long sys_setgid
+	.long sys_setfsuid	/* 215 */
+	.long sys_setfsgid
+	.long sys_pivot_root
+	.long sys_mincore
+	.long sys_madvise
+	.long sys_getdents64	/* 220 */
+	.long sys_fcntl64
+	.long sys_ni_syscall	/* reserved for TUX */
+	.long sys_ni_syscall
+	.long sys_gettid
+	.long sys_readahead	/* 225 */
+	.long sys_setxattr
+	.long sys_lsetxattr
+	.long sys_fsetxattr
+	.long sys_getxattr
+	.long sys_lgetxattr	/* 230 */
+	.long sys_fgetxattr
+	.long sys_listxattr
+	.long sys_llistxattr
+	.long sys_flistxattr
+	.long sys_removexattr	/* 235 */
+	.long sys_lremovexattr
+	.long sys_fremovexattr
+	.long sys_tkill
+	.long sys_sendfile64
+	.long sys_futex		/* 240 */
+	.long sys_sched_setaffinity
+	.long sys_sched_getaffinity
+	.long sys_ni_syscall	/* sys_set_thread_area */
+	.long sys_ni_syscall	/* sys_get_thread_area */
+	.long sys_io_setup	/* 245 */
+	.long sys_io_destroy
+	.long sys_io_getevents
+	.long sys_io_submit
+	.long sys_io_cancel
+	.long sys_fadvise64	/* 250 */
+	.long sys_ni_syscall
+	.long sys_exit_group
+	.long sys_lookup_dcookie
+	.long sys_epoll_create
+	.long sys_epoll_ctl	/* 255 */
+	.long sys_epoll_wait
+	.long sys_remap_file_pages
+ 	.long sys_set_tid_address
+ 	.long sys_timer_create
+ 	.long sys_timer_settime		/* 260 */
+ 	.long sys_timer_gettime
+ 	.long sys_timer_getoverrun
+ 	.long sys_timer_delete
+ 	.long sys_clock_settime
+ 	.long sys_clock_gettime		/* 265 */
+ 	.long sys_clock_getres
+ 	.long sys_clock_nanosleep
+	.long sys_statfs64
+	.long sys_fstatfs64
+	.long sys_tgkill	/* 270 */
+	.long sys_utimes
+ 	.long sys_fadvise64_64
+	.long sys_ni_syscall	/* sys_vserver */
+	.long sys_ni_syscall	/* sys_mbind */
+	.long sys_ni_syscall	/* 275 sys_get_mempolicy */
+	.long sys_ni_syscall	/* sys_set_mempolicy */
+	.long sys_mq_open
+	.long sys_mq_unlink
+	.long sys_mq_timedsend
+	.long sys_mq_timedreceive	/* 280 */
+	.long sys_mq_notify
+	.long sys_mq_getsetattr
+	.long sys_ni_syscall		/* reserved for kexec */
+	.long sys_waitid
+
+        /*
+         * NOTE!! This doesn't have to be exact - we just have
+         * to make sure we have _enough_ of the "sys_ni_syscall"
+         * entries. Don't panic if you notice that this hasn't
+         * been shrunk every time we add a new system call.
+         */
+
+	.rept NR_syscalls - (.-sys_call_table) / 4
+		.long sys_ni_syscall
+	.endr
+