m68knommu: clean up use of MBAR for DRAM registers on ColdFire start

In some of the RAM size autodetection code on ColdFire CPU startup
we reference DRAM registers relative to the MBAR register. Not all of
the supported ColdFire CPUs have an MBAR, and currently this works
because we fake an MBAR address on those registers. In an effort to
clean this up, and eventually remove the fake MBAR setting make the
DRAM register address definitions actually contain the MBAR (or IPSBAR
as appropriate) value as required.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>

1 files changed, 5 insertions, 5 deletions

diff --git a/arch/m68k/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h
index 89067bd..3f3dbf0 100644
--- a/arch/m68k/include/asm/m523xsim.h
+++ b/arch/m68k/include/asm/m523xsim.h
@@ -40,11 +40,11 @@
 /*
  *	SDRAM configuration registers.
  */
-#define	MCFSIM_DCR		0x44		/* SDRAM control */
-#define	MCFSIM_DACR0		0x48		/* SDRAM base address 0 */
-#define	MCFSIM_DMR0		0x4c		/* SDRAM address mask 0 */
-#define	MCFSIM_DACR1		0x50		/* SDRAM base address 1 */
-#define	MCFSIM_DMR1		0x54		/* SDRAM address mask 1 */
+#define	MCFSIM_DCR		(MCF_IPSBAR + 0x44)	/* Control */
+#define	MCFSIM_DACR0		(MCF_IPSBAR + 0x48)	/* Base address 0 */
+#define	MCFSIM_DMR0		(MCF_IPSBAR + 0x4c)	/* Address mask 0 */
+#define	MCFSIM_DACR1		(MCF_IPSBAR + 0x50)	/* Base address 1 */
+#define	MCFSIM_DMR1		(MCF_IPSBAR + 0x54)	/* Address mask 1 */
 
 /*
  *  Reset Controll Unit (relative to IPSBAR).