[PATCH] m68knommu: remove uCdimm specific config code

Remove uCdimm specific config code. Use common 68VZ328 config code now.

Signed-off-by: Greg Ungerer <gerg@uclinux.com>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

1 files changed, 0 insertions, 117 deletions

diff --git a/arch/m68knommu/platform/68VZ328/ucdimm/config.c b/arch/m68knommu/platform/68VZ328/ucdimm/config.c
deleted file mode 100644
index 2deadaf..0000000
--- a/arch/m68knommu/platform/68VZ328/ucdimm/config.c
+++ /dev/null
@@ -1,117 +0,0 @@
-/*
- *  linux/arch/m68knommu/platform/68VZ328/ucdimm/config.c
- *
- *  Copyright (C) 1993 Hamish Macdonald
- *  Copyright (C) 1999 D. Jeff Dionne
- *
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file COPYING in the main directory of this archive
- * for more details.
- */
-
-#include <stdarg.h>
-#include <linux/config.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/mm.h>
-#include <linux/tty.h>
-#include <linux/console.h>
-
-#include <asm/setup.h>
-#include <asm/system.h>
-#include <asm/pgtable.h>
-#include <asm/irq.h>
-#include <asm/machdep.h>
-#include <asm/MC68VZ328.h>
-#include <asm/bootstd.h>
-
-void BSP_sched_init(void (*timer_routine)(int, void *, struct pt_regs *))
-{
-	/* Restart mode, Enable int, 32KHz, Enable timer */
-	TCTL = TCTL_OM | TCTL_IRQEN | TCTL_CLKSOURCE_32KHZ | TCTL_TEN;
-	/* Set prescaler (Divide 32KHz by 32)*/
-	TPRER = 31;
-	/* Set compare register  32Khz / 32 / 10 = 100 */
-	TCMP = 10;                                                              
-
-	request_irq(TMR_IRQ_NUM, timer_routine, IRQ_FLG_LOCK, "timer", NULL);
-}
-
-void BSP_tick(void)
-{
-  	/* Reset Timer1 */
-	TSTAT &= 0;
-}
-
-unsigned long BSP_gettimeoffset (void)
-{
-	return 0;
-}
-
-void BSP_gettod (int *yearp, int *monp, int *dayp,
-		   int *hourp, int *minp, int *secp)
-{
-}
-
-int BSP_hwclk(int op, struct hwclk_time *t)
-{
-	if (!op) {
-		/* read */
-	} else {
-		/* write */
-	}
-	return 0;
-}
-
-int BSP_set_clock_mmss (unsigned long nowtime)
-{
-#if 0
-	short real_seconds = nowtime % 60, real_minutes = (nowtime / 60) % 60;
-
-	tod->second1 = real_seconds / 10;
-	tod->second2 = real_seconds % 10;
-	tod->minute1 = real_minutes / 10;
-	tod->minute2 = real_minutes % 10;
-#endif
-	return 0;
-}
-
-void BSP_reset (void)
-{
-	local_irq_disable();
-	asm volatile ("
-		moveal #0x10c00000, %a0;
-		moveb #0, 0xFFFFF300;
-		moveal 0(%a0), %sp;
-		moveal 4(%a0), %a0;
-		jmp (%a0);
-	");
-}
-
-unsigned char *cs8900a_hwaddr;
-static int errno;
-
-_bsc0(char *, getserialnum)
-_bsc1(unsigned char *, gethwaddr, int, a)
-_bsc1(char *, getbenv, char *, a)
-
-void config_BSP(char *command, int len)
-{
-	unsigned char *p;
-
-	printk(KERN_INFO "\n68VZ328 DragonBallVZ support (c) 2001 Lineo, Inc.\n");
-
-	printk(KERN_INFO "uCdimm serial string [%s]\n",getserialnum());
-	p = cs8900a_hwaddr = gethwaddr(0);
-	printk(KERN_INFO "uCdimm hwaddr %.2x:%.2x:%.2x:%.2x:%.2x:%.2x\n",
-		p[0], p[1], p[2], p[3], p[4], p[5]);
-	p = getbenv("APPEND");
-	if (p) strcpy(p,command);
-	else command[0] = 0;
- 
-	mach_sched_init      = BSP_sched_init;
-	mach_tick            = BSP_tick;
-	mach_gettimeoffset   = BSP_gettimeoffset;
-	mach_gettod          = BSP_gettod;
-	mach_reset           = BSP_reset;
-}