initial merge with 3.2.72

1 files changed, 15 insertions, 38 deletions

diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 653da62..d46f1da 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -24,6 +24,7 @@ config MIPS
 	select GENERIC_IRQ_PROBE
 	select GENERIC_IRQ_SHOW
 	select HAVE_ARCH_JUMP_LABEL
+	select IRQ_FORCED_THREADING
 
 menu "Machine selection"
 
@@ -46,6 +47,8 @@ config MIPS_ALCHEMY
 	select GENERIC_GPIO
 	select ARCH_WANT_OPTIONAL_GPIOLIB
 	select SYS_SUPPORTS_ZBOOT
+	select USB_ARCH_HAS_OHCI
+	select USB_ARCH_HAS_EHCI
 
 config AR7
 	bool "Texas Instruments AR7"
@@ -91,15 +94,8 @@ config BCM47XX
 	select DMA_NONCOHERENT
 	select HW_HAS_PCI
 	select IRQ_CPU
-	select SYS_HAS_CPU_MIPS32_R1
 	select SYS_SUPPORTS_32BIT_KERNEL
 	select SYS_SUPPORTS_LITTLE_ENDIAN
-	select SSB
-	select SSB_DRIVER_MIPS
-	select SSB_DRIVER_EXTIF
-	select SSB_EMBEDDED
-	select SSB_B43_PCI_BRIDGE if PCI
-	select SSB_PCICORE_HOSTMODE if PCI
 	select GENERIC_GPIO
 	select SYS_HAS_EARLY_PRINTK
 	select CFE
@@ -185,6 +181,7 @@ config MACH_JAZZ
 	select CSRC_R4K
 	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
 	select GENERIC_ISA_DMA
+	select HAVE_PCSPKR_PLATFORM
 	select IRQ_CPU
 	select I8253
 	select I8259
@@ -211,6 +208,7 @@ config MACH_JZ4740
 	select SYS_HAS_EARLY_PRINTK
 	select HAVE_PWM
 	select HAVE_CLK
+	select GENERIC_IRQ_CHIP
 
 config LANTIQ
 	bool "Lantiq based platforms"
@@ -266,6 +264,7 @@ config MIPS_MALTA
 	select CSRC_R4K
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
+	select HAVE_PCSPKR_PLATFORM
 	select IRQ_CPU
 	select IRQ_GIC
 	select HW_HAS_PCI
@@ -640,6 +639,7 @@ config SNI_RM
 	select DEFAULT_SGI_PARTITION if CPU_BIG_ENDIAN
 	select DMA_NONCOHERENT
 	select GENERIC_ISA_DMA
+	select HAVE_PCSPKR_PLATFORM
 	select HW_HAS_EISA
 	select HW_HAS_PCI
 	select IRQ_CPU
@@ -719,6 +719,7 @@ config CAVIUM_OCTEON_SIMULATOR
 	select SYS_SUPPORTS_HIGHMEM
 	select SYS_SUPPORTS_HOTPLUG_CPU
 	select SYS_HAS_CPU_CAVIUM_OCTEON
+	select HOLES_IN_ZONE
 	help
 	  The Octeon simulator is software performance model of the Cavium
 	  Octeon Processor. It supports simulating Octeon processors on x86
@@ -741,6 +742,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD
 	select ZONE_DMA32
 	select USB_ARCH_HAS_OHCI
 	select USB_ARCH_HAS_EHCI
+	select HOLES_IN_ZONE
 	help
 	  This option supports all of the Octeon reference boards from Cavium
 	  Networks. It builds a kernel that dynamically determines the Octeon
@@ -785,6 +787,7 @@ endchoice
 
 source "arch/mips/alchemy/Kconfig"
 source "arch/mips/ath79/Kconfig"
+source "arch/mips/bcm47xx/Kconfig"
 source "arch/mips/bcm63xx/Kconfig"
 source "arch/mips/jazz/Kconfig"
 source "arch/mips/jz4740/Kconfig"
@@ -817,10 +820,6 @@ config ARCH_HAS_ILOG2_U64
 	bool
 	default n
 
-config ARCH_SUPPORTS_OPROFILE
-	bool
-	default y if !MIPS_MT_SMTC
-
 config GENERIC_HWEIGHT
 	bool
 	default y
@@ -970,6 +969,9 @@ config ISA_DMA_API
 config GENERIC_GPIO
 	bool
 
+config HOLES_IN_ZONE
+	bool
+
 #
 # Endianess selection.  Sufficiently obscure so many users don't know what to
 # answer,so we try hard to limit the available choices.  Also the use of a
@@ -2089,7 +2091,7 @@ config NODES_SHIFT
 
 config HW_PERF_EVENTS
 	bool "Enable hardware performance counter support for perf events"
-	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && CPU_MIPS32
+	depends on PERF_EVENTS && !MIPS_MT_SMTC && OPROFILE=n && (CPU_MIPS32 || CPU_MIPS64 || CPU_R10000 || CPU_SB1 || CPU_CAVIUM_OCTEON)
 	default y
 	help
 	  Enable hardware performance counter support for perf events. If
@@ -2249,16 +2251,6 @@ config HZ
 
 source "kernel/Kconfig.preempt"
 
-config MIPS_INSANE_LARGE
-	bool "Support for large 64-bit configurations"
-	depends on CPU_R10000 && 64BIT
-	help
-	  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
-	  previous 64-bit processors which only supported 40 bit / 1TB. If you
-	  need processes of more than 1TB virtual address space, say Y here.
-	  This will result in additional memory usage, so it is not
-	  recommended for normal users.
-
 config KEXEC
 	bool "Kexec system call (EXPERIMENTAL)"
 	depends on EXPERIMENTAL
@@ -2388,6 +2380,7 @@ config MMU
 config I8253
 	bool
 	select CLKSRC_I8253
+	select CLKEVT_I8253
 	select MIPS_EXTERNAL_TIMER
 
 config ZONE_DMA32
@@ -2489,20 +2482,4 @@ source "security/Kconfig"
 
 source "crypto/Kconfig"
 
-menuconfig VIRTUALIZATION
-	bool "Virtualization"
-	default n
-	---help---
-	  Say Y here to get to see options for using your Linux host to run other
-	  operating systems inside virtual machines (guests).
-	  This option alone does not add any kernel code.
-
-	  If you say N, all options in this submenu will be skipped and disabled.
-
-if VIRTUALIZATION
-
-source drivers/virtio/Kconfig
-
-endif # VIRTUALIZATION
-
 source "lib/Kconfig"