aboutsummaryrefslogtreecommitdiffstats
path: root/arch/mn10300/unit-asb2305
diff options
context:
space:
mode:
authorDavid Howells <dhowells@redhat.com>2009-04-10 14:33:48 +0100
committerDavid Howells <dhowells@redhat.com>2009-04-10 14:33:48 +0100
commit2f2a2132ff056bb45697dc855eb4fd95b70b38cb (patch)
treee20dcbf96a99121fb45e5f4e78660ff7eb48851b /arch/mn10300/unit-asb2305
parentda7616610c8d2ec16a8ada44216e836e5fcbd08b (diff)
downloadkernel_samsung_smdk4412-2f2a2132ff056bb45697dc855eb4fd95b70b38cb.zip
kernel_samsung_smdk4412-2f2a2132ff056bb45697dc855eb4fd95b70b38cb.tar.gz
kernel_samsung_smdk4412-2f2a2132ff056bb45697dc855eb4fd95b70b38cb.tar.bz2
Separate out the proc- and unit-specific header directories from the general
MN10300 arch headers and place them instead in the same directories as contain the .c files for the processor and unit implementations. This permits the symlinks include/asm/proc and include/asm/unit to be dispensed with. This does, however, require that #include <asm/proc/xxx.h> be converted to #include <proc/xxx.h> and similarly for asm/unit -> unit. Signed-off-by: David Howells <dhowells@redhat.com>
Diffstat (limited to 'arch/mn10300/unit-asb2305')
-rw-r--r--arch/mn10300/unit-asb2305/include/unit/clock.h45
-rw-r--r--arch/mn10300/unit-asb2305/include/unit/leds.h51
-rw-r--r--arch/mn10300/unit-asb2305/include/unit/serial.h120
-rw-r--r--arch/mn10300/unit-asb2305/include/unit/timex.h135
-rw-r--r--arch/mn10300/unit-asb2305/leds.c2
-rw-r--r--arch/mn10300/unit-asb2305/unit-init.c2
6 files changed, 353 insertions, 2 deletions
diff --git a/arch/mn10300/unit-asb2305/include/unit/clock.h b/arch/mn10300/unit-asb2305/include/unit/clock.h
new file mode 100644
index 0000000..7d51484
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/clock.h
@@ -0,0 +1,45 @@
+/* ASB2305-specific clocks
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_CLOCK_H
+#define _ASM_UNIT_CLOCK_H
+
+#ifndef __ASSEMBLY__
+
+#ifdef CONFIG_MN10300_RTC
+
+extern unsigned long mn10300_ioclk; /* IOCLK (crystal speed) in HZ */
+extern unsigned long mn10300_iobclk;
+extern unsigned long mn10300_tsc_per_HZ;
+
+#define MN10300_IOCLK ((unsigned long)mn10300_ioclk)
+/* If this processors has a another clock, uncomment the below. */
+/* #define MN10300_IOBCLK ((unsigned long)mn10300_iobclk) */
+
+#else /* !CONFIG_MN10300_RTC */
+
+#define MN10300_IOCLK 33333333UL
+/* #define MN10300_IOBCLK 66666666UL */
+
+#endif /* !CONFIG_MN10300_RTC */
+
+#define MN10300_JCCLK MN10300_IOCLK
+#define MN10300_TSCCLK MN10300_IOCLK
+
+#ifdef CONFIG_MN10300_RTC
+#define MN10300_TSC_PER_HZ ((unsigned long)mn10300_tsc_per_HZ)
+#else /* !CONFIG_MN10300_RTC */
+#define MN10300_TSC_PER_HZ (MN10300_TSCCLK/HZ)
+#endif /* !CONFIG_MN10300_RTC */
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_CLOCK_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/leds.h b/arch/mn10300/unit-asb2305/include/unit/leds.h
new file mode 100644
index 0000000..bc471f6
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/leds.h
@@ -0,0 +1,51 @@
+/* ASB2305-specific LEDs
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+
+#ifndef _ASM_UNIT_LEDS_H
+#define _ASM_UNIT_LEDS_H
+
+#include <asm/pio-regs.h>
+#include <asm/cpu-regs.h>
+#include <asm/exceptions.h>
+
+#define ASB2305_7SEGLEDS __SYSREG(0xA6F90000, u32)
+
+/* perform a hard reset by driving PIO06 low */
+#define mn10300_unit_hard_reset() \
+do { \
+ P0OUT &= 0xbf; \
+ P0MD = (P0MD & P0MD_6) | P0MD_6_OUT; \
+} while (0)
+
+/*
+ * use the 7-segment LEDs to indicate states
+ */
+/* indicate double-fault by displaying "db-f" on the LEDs */
+#define mn10300_set_dbfleds \
+ mov 0x43077f1d,d0 ; \
+ mov d0,(ASB2305_7SEGLEDS)
+
+/* flip the 7-segment LEDs between "Gdb-" and "----" */
+#define mn10300_set_gdbleds(ONOFF) \
+do { \
+ ASB2305_7SEGLEDS = (ONOFF) ? 0x8543077f : 0x7f7f7f7f; \
+} while (0)
+
+#ifndef __ASSEMBLY__
+extern void peripheral_leds_display_exception(enum exception_code);
+extern void peripheral_leds_led_chase(void);
+extern void peripheral_leds7x4_display_dec(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_hex(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_minssecs(unsigned int, unsigned int);
+extern void peripheral_leds7x4_display_rtc(void);
+#endif /* __ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_LEDS_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/serial.h b/arch/mn10300/unit-asb2305/include/unit/serial.h
new file mode 100644
index 0000000..3bfc9093
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/serial.h
@@ -0,0 +1,120 @@
+/* ASB2305-specific 8250 serial ports
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_SERIAL_H
+#define _ASM_UNIT_SERIAL_H
+
+#include <asm/cpu/cpu-regs.h>
+#include <proc/irq.h>
+#include <linux/serial_reg.h>
+
+#define SERIAL_PORT0_BASE_ADDRESS 0xA6FB0000
+#define ASB2305_DEBUG_MCR __SYSREG(0xA6FB0000 + UART_MCR * 2, u8)
+
+#define SERIAL_IRQ XIRQ0 /* Dual serial (PC16552) (Hi) */
+
+/*
+ * dispose of the /dev/ttyS0 serial port
+ */
+#ifndef CONFIG_GDBSTUB_ON_TTYSx
+
+#define SERIAL_PORT_DFNS \
+ { \
+ .baud_base = BASE_BAUD, \
+ .irq = SERIAL_IRQ, \
+ .flags = STD_COM_FLAGS, \
+ .iomem_base = (u8 *) SERIAL_PORT0_BASE_ADDRESS, \
+ .iomem_reg_shift = 2, \
+ .io_type = SERIAL_IO_MEM, \
+ },
+
+#ifndef __ASSEMBLY__
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#else /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#define SERIAL_PORT_DFNS /* stolen by gdb-stub */
+
+#if defined(CONFIG_GDBSTUB_ON_TTYS0)
+#define GDBPORT_SERIAL_RX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_RX * 4, u8)
+#define GDBPORT_SERIAL_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define GDBPORT_SERIAL_DLL __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLL * 4, u8)
+#define GDBPORT_SERIAL_DLM __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_DLM * 4, u8)
+#define GDBPORT_SERIAL_IER __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IER * 4, u8)
+#define GDBPORT_SERIAL_IIR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_IIR * 4, u8)
+#define GDBPORT_SERIAL_FCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_FCR * 4, u8)
+#define GDBPORT_SERIAL_LCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LCR * 4, u8)
+#define GDBPORT_SERIAL_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define GDBPORT_SERIAL_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define GDBPORT_SERIAL_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+#define GDBPORT_SERIAL_SCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_SCR * 4, u8)
+#define GDBPORT_SERIAL_IRQ SERIAL_IRQ
+
+#elif defined(CONFIG_GDBSTUB_ON_TTYS1)
+#error The ASB2305 doesnt have a /dev/ttyS1
+#endif
+
+#ifndef __ASSEMBLY__
+
+#define TTYS0_TX __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_TX * 4, u8)
+#define TTYS0_MCR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MCR * 4, u8)
+#define TTYS0_LSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_LSR * 4, u8)
+#define TTYS0_MSR __SYSREG(SERIAL_PORT0_BASE_ADDRESS + UART_MSR * 4, u8)
+
+#define LSR_WAIT_FOR(STATE) \
+do { \
+ while (!(TTYS0_LSR & UART_LSR_##STATE)) {} \
+} while (0)
+#define FLOWCTL_WAIT_FOR(LINE) \
+do { \
+ while (!(TTYS0_MSR & UART_MSR_##LINE)) {} \
+} while (0)
+#define FLOWCTL_CLEAR(LINE) \
+do { \
+ TTYS0_MCR &= ~UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_SET(LINE) \
+do { \
+ TTYS0_MCR |= UART_MCR_##LINE; \
+} while (0)
+#define FLOWCTL_QUERY(LINE) ({ TTYS0_MSR & UART_MSR_##LINE; })
+
+static inline void __debug_to_serial(const char *p, int n)
+{
+ char ch;
+
+ FLOWCTL_SET(DTR);
+
+ for (; n > 0; n--) {
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+
+ ch = *p++;
+ if (ch == 0x0a) {
+ TTYS0_TX = 0x0d;
+ LSR_WAIT_FOR(THRE);
+ FLOWCTL_WAIT_FOR(CTS);
+ }
+ TTYS0_TX = ch;
+ }
+
+ FLOWCTL_CLEAR(DTR);
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* CONFIG_GDBSTUB_ON_TTYSx */
+
+#endif /* _ASM_UNIT_SERIAL_H */
diff --git a/arch/mn10300/unit-asb2305/include/unit/timex.h b/arch/mn10300/unit-asb2305/include/unit/timex.h
new file mode 100644
index 0000000..a71c49a
--- /dev/null
+++ b/arch/mn10300/unit-asb2305/include/unit/timex.h
@@ -0,0 +1,135 @@
+/* ASB2305 timer specifcations
+ *
+ * Copyright (C) 2007 Red Hat, Inc. All Rights Reserved.
+ * Written by David Howells (dhowells@redhat.com)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public Licence
+ * as published by the Free Software Foundation; either version
+ * 2 of the Licence, or (at your option) any later version.
+ */
+#ifndef _ASM_UNIT_TIMEX_H
+#define _ASM_UNIT_TIMEX_H
+
+#ifndef __ASSEMBLY__
+#include <linux/irq.h>
+#endif /* __ASSEMBLY__ */
+
+#include <asm/cpu/timer-regs.h>
+#include <unit/clock.h>
+
+/*
+ * jiffies counter specifications
+ */
+
+#define TMJCBR_MAX 0xffff
+#define TMJCBC TM01BC
+
+#define TMJCMD TM01MD
+#define TMJCBR TM01BR
+#define TMJCIRQ TM1IRQ
+#define TMJCICR TM1ICR
+#define TMJCICR_LEVEL GxICR_LEVEL_5
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_jiffies_counter(void)
+{
+ unsigned rate;
+ u16 md, t16;
+
+ /* use as little prescaling as possible to avoid losing accuracy */
+ md = TM0MD_SRC_IOCLK;
+ rate = MN10300_JCCLK / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_8;
+ rate = MN10300_JCCLK / 8 / HZ;
+
+ if (rate > TMJCBR_MAX) {
+ md = TM0MD_SRC_IOCLK_32;
+ rate = MN10300_JCCLK / 32 / HZ;
+
+ if (rate > TMJCBR_MAX)
+ BUG();
+ }
+ }
+
+ TMJCBR = rate - 1;
+ t16 = TMJCBR;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_INIT_COUNTER |
+ TM1MD_INIT_COUNTER << 8;
+
+ TMJCMD =
+ md |
+ TM1MD_SRC_TM0CASCADE << 8 |
+ TM0MD_COUNT_ENABLE |
+ TM1MD_COUNT_ENABLE << 8;
+
+ t16 = TMJCMD;
+
+ TMJCICR |= GxICR_ENABLE | GxICR_DETECT | GxICR_REQUEST;
+ t16 = TMJCICR;
+}
+
+static inline void shutdown_jiffies_counter(void)
+{
+}
+
+#endif /* !__ASSEMBLY__ */
+
+
+/*
+ * timestamp counter specifications
+ */
+
+#define TMTSCBR_MAX 0xffffffff
+#define TMTSCBC TM45BC
+
+#ifndef __ASSEMBLY__
+
+static inline void startup_timestamp_counter(void)
+{
+ /* set up timer 4 & 5 cascaded as a 32-bit counter to count real time
+ * - count down from 4Gig-1 to 0 and wrap at IOCLK rate
+ */
+ TM45BR = TMTSCBR_MAX;
+
+ TM4MD = TM4MD_SRC_IOCLK;
+ TM4MD |= TM4MD_INIT_COUNTER;
+ TM4MD &= ~TM4MD_INIT_COUNTER;
+ TM4ICR = 0;
+
+ TM5MD = TM5MD_SRC_TM4CASCADE;
+ TM5MD |= TM5MD_INIT_COUNTER;
+ TM5MD &= ~TM5MD_INIT_COUNTER;
+ TM5ICR = 0;
+
+ TM5MD |= TM5MD_COUNT_ENABLE;
+ TM4MD |= TM4MD_COUNT_ENABLE;
+}
+
+static inline void shutdown_timestamp_counter(void)
+{
+ TM4MD = 0;
+ TM5MD = 0;
+}
+
+/*
+ * we use a cascaded pair of 16-bit down-counting timers to count I/O
+ * clock cycles for the purposes of time keeping
+ */
+typedef unsigned long cycles_t;
+
+static inline cycles_t read_timestamp_counter(void)
+{
+ return (cycles_t) TMTSCBC;
+}
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* _ASM_UNIT_TIMEX_H */
diff --git a/arch/mn10300/unit-asb2305/leds.c b/arch/mn10300/unit-asb2305/leds.c
index e99dcc9..d345ff9 100644
--- a/arch/mn10300/unit-asb2305/leds.c
+++ b/arch/mn10300/unit-asb2305/leds.c
@@ -15,7 +15,7 @@
#include <asm/processor.h>
#include <asm/cpu/intctl-regs.h>
#include <asm/cpu/rtc-regs.h>
-#include <asm/unit/leds.h>
+#include <unit/leds.h>
static const u8 asb2305_led_hex_tbl[16] = {
0x80, 0xf2, 0x48, 0x60, 0x32, 0x24, 0x04, 0xf0,
diff --git a/arch/mn10300/unit-asb2305/unit-init.c b/arch/mn10300/unit-asb2305/unit-init.c
index 72812a9..1c452cc 100644
--- a/arch/mn10300/unit-asb2305/unit-init.c
+++ b/arch/mn10300/unit-asb2305/unit-init.c
@@ -18,7 +18,7 @@
#include <asm/cpu/intctl-regs.h>
#include <asm/cpu/rtc-regs.h>
#include <asm/cpu/serial-regs.h>
-#include <asm/unit/serial.h>
+#include <unit/serial.h>
/*
* initialise some of the unit hardware before gdbstub is set up