powerpc/85xx: Add support for the "socrates" board (MPC8544).

Supported are Ethernet, serial console, I2C, I2C-based RTC and
temperature sensors, NOR and NAND flash, PCI, USB, CAN and Lime
display controller.

The multiplexing of FPGA interrupts onto PowerPC interrupt lines is
supported through our own fpga_pic interrupt controller driver.

For example the SJA1000 controller is level low sensitive connected to
fpga_pic line 2 and is routed to the second (of three) irq lines to
the CPU:

    can@3,100 {
            compatible = "philips,sja1000";
            reg = <3 0x100 0x80>;
            interrupts = <2 2>;
            interrupts = <2 8 1>;   // number, type, routing
            interrupt-parent = <&fpga_pic>;
    };

Signed-off-by: Sergei Poselenov <sposelenov@emcraft.com>
Signed-off-by: Yuri Tikhonov <yur@emcraft.com>
Signed-off-by: Ilya Yanok <yanok@emcraft.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Dmitry Rakhchev <rda@emcraft.com>
Signed-off-by: Kumar Gala <galak@kernel.crashing.org>

1 files changed, 338 insertions, 0 deletions

diff --git a/arch/powerpc/boot/dts/socrates.dts b/arch/powerpc/boot/dts/socrates.dts
new file mode 100644
index 0000000..b8d0fc6
--- /dev/null
+++ b/arch/powerpc/boot/dts/socrates.dts
@@ -0,0 +1,338 @@
+/*
+ * Device Tree Source for the Socrates board (MPC8544).
+ *
+ * Copyright (c) 2008 Emcraft Systems.
+ * Sergei Poselenov, <sposelenov@emcraft.com>
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+
+/dts-v1/;
+
+/ {
+	model = "abb,socrates";
+	compatible = "abb,socrates";
+	#address-cells = <1>;
+	#size-cells = <1>;
+
+	aliases {
+		ethernet0 = &enet0;
+		ethernet1 = &enet1;
+		serial0 = &serial0;
+		serial1 = &serial1;
+		pci0 = &pci0;
+	};
+
+	cpus {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		PowerPC,8544@0 {
+			device_type = "cpu";
+			reg = <0>;
+			d-cache-line-size = <32>;
+			i-cache-line-size = <32>;
+			d-cache-size = <0x8000>;	// L1, 32K
+			i-cache-size = <0x8000>;	// L1, 32K
+			timebase-frequency = <0>;
+			bus-frequency = <0>;
+			clock-frequency = <0>;
+			next-level-cache = <&L2>;
+		};
+	};
+
+	memory {
+		device_type = "memory";
+		reg = <0x00000000 0x00000000>;	// Filled in by U-Boot
+	};
+
+	soc8544@e0000000 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+
+		ranges = <0x00000000 0xe0000000 0x00100000>;
+		reg = <0xe0000000 0x00001000>;	// CCSRBAR 1M
+		bus-frequency = <0>;		// Filled in by U-Boot
+		compatible = "fsl,mpc8544-immr", "simple-bus";
+
+		memory-controller@2000 {
+			compatible = "fsl,mpc8544-memory-controller";
+			reg = <0x2000 0x1000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <18 2>;
+		};
+
+		L2: l2-cache-controller@20000 {
+			compatible = "fsl,mpc8544-l2-cache-controller";
+			reg = <0x20000 0x1000>;
+			cache-line-size = <32>;
+			cache-size = <0x40000>;	// L2, 256K
+			interrupt-parent = <&mpic>;
+			interrupts = <16 2>;
+		};
+
+		i2c@3000 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <0>;
+			compatible = "fsl-i2c";
+			reg = <0x3000 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+
+			dtt@28 {
+				compatible = "winbond,w83782d";
+				reg = <0x28>;
+			};
+			rtc@32 {
+				compatible = "epson,rx8025";
+				reg = <0x32>;
+				interrupts = <7 1>;
+				interrupt-parent = <&mpic>;
+			};
+			dtt@4c {
+				compatible = "dallas,ds75";
+				reg = <0x4c>;
+			};
+			ts@4a {
+				compatible = "ti,tsc2003";
+				reg = <0x4a>;
+				interrupt-parent = <&mpic>;
+				interrupts = <8 1>;
+			};
+		};
+
+		i2c@3100 {
+			#address-cells = <1>;
+			#size-cells = <0>;
+			cell-index = <1>;
+			compatible = "fsl-i2c";
+			reg = <0x3100 0x100>;
+			interrupts = <43 2>;
+			interrupt-parent = <&mpic>;
+			dfsrr;
+		};
+
+		enet0: ethernet@24000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <0>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x24000 0x1000>;
+			ranges = <0x0 0x24000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <29 2 30 2 34 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy0>;
+			tbi-handle = <&tbi0>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-mdio";
+				reg = <0x520 0x20>;
+
+				phy0: ethernet-phy@0 {
+					interrupt-parent = <&mpic>;
+					interrupts = <0 1>;
+					reg = <0>;
+				};
+				phy1: ethernet-phy@1 {
+					interrupt-parent = <&mpic>;
+					interrupts = <0 1>;
+					reg = <1>;
+				};
+				tbi0: tbi-phy@11 {
+					reg = <0x11>;
+				};
+			};
+		};
+
+		enet1: ethernet@26000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			cell-index = <1>;
+			device_type = "network";
+			model = "eTSEC";
+			compatible = "gianfar";
+			reg = <0x26000 0x1000>;
+			ranges = <0x0 0x26000 0x1000>;
+			local-mac-address = [ 00 00 00 00 00 00 ];
+			interrupts = <31 2 32 2 33 2>;
+			interrupt-parent = <&mpic>;
+			phy-handle = <&phy1>;
+			tbi-handle = <&tbi1>;
+			phy-connection-type = "rgmii-id";
+
+			mdio@520 {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				compatible = "fsl,gianfar-tbi";
+				reg = <0x520 0x20>;
+
+				tbi1: tbi-phy@11 {
+					reg = <0x11>;
+				};
+			};
+		};
+
+		serial0: serial@4500 {
+			cell-index = <0>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4500 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		serial1: serial@4600 {
+			cell-index = <1>;
+			device_type = "serial";
+			compatible = "ns16550";
+			reg = <0x4600 0x100>;
+			clock-frequency = <0>;
+			interrupts = <42 2>;
+			interrupt-parent = <&mpic>;
+		};
+
+		global-utilities@e0000 {	//global utilities block
+			compatible = "fsl,mpc8548-guts";
+			reg = <0xe0000 0x1000>;
+			fsl,has-rstcr;
+		};
+
+		mpic: pic@40000 {
+			interrupt-controller;
+			#address-cells = <0>;
+			#interrupt-cells = <2>;
+			reg = <0x40000 0x40000>;
+			compatible = "chrp,open-pic";
+			device_type = "open-pic";
+		};
+	};
+
+
+	localbus {
+		compatible = "fsl,mpc8544-localbus",
+		             "fsl,pq3-localbus",
+			     "simple-bus";
+		#address-cells = <2>;
+		#size-cells = <1>;
+		reg = <0xe0005000 0x40>;
+
+		ranges = <0 0 0xfc000000 0x04000000
+			  2 0 0xc8000000 0x04000000
+			  3 0 0xc0000000 0x00100000
+			>; /* Overwritten by U-Boot */
+
+		nor_flash@0,0 {
+			compatible = "amd,s29gl256n", "cfi-flash";
+			bank-width = <2>;
+			reg = <0x0 0x000000 0x4000000>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			partition@0 {
+				label = "kernel";
+				reg = <0x0 0x1e0000>;
+				read-only;
+			};
+			partition@1e0000 {
+				label = "dtb";
+				reg = <0x1e0000 0x20000>;
+			};
+			partition@200000 {
+				label = "root";
+				reg = <0x200000 0x200000>;
+			};
+			partition@400000 {
+				label = "user";
+				reg = <0x400000 0x3b80000>;
+			};
+			partition@3f80000 {
+				label = "env";
+				reg = <0x3f80000 0x40000>;
+				read-only;
+			};
+			partition@3fc0000 {
+				label = "u-boot";
+				reg = <0x3fc0000 0x40000>;
+				read-only;
+			};
+		};
+
+		display@2,0 {
+			compatible = "fujitsu,lime";
+			reg = <2 0x0 0x4000000>;
+			interrupt-parent = <&mpic>;
+			interrupts = <6 1>;
+		};
+
+		fpga_pic: fpga-pic@3,10 {
+			compatible = "abb,socrates-fpga-pic";
+			reg = <3 0x10 0x10>;
+			interrupt-controller;
+			/* IRQs 2, 10, 11, active low, level-sensitive */
+			interrupts = <2 1 10 1 11 1>;
+			interrupt-parent = <&mpic>;
+			#interrupt-cells = <3>;
+		};
+
+		spi@3,60 {
+			compatible = "abb,socrates-spi";
+			reg = <3 0x60 0x10>;
+			interrupts = <8 4 0>;	// number, type, routing
+			interrupt-parent = <&fpga_pic>;
+		};
+
+		nand@3,70 {
+			compatible = "abb,socrates-nand";
+			reg = <3 0x70 0x04>;
+			bank-width = <1>;
+			#address-cells = <1>;
+			#size-cells = <1>;
+			data@0 {
+				label = "data";
+				reg = <0x0 0x40000000>;
+			};
+		};
+
+		can@3,100 {
+			compatible = "philips,sja1000";
+			reg = <3 0x100 0x80>;
+			interrupts = <2 8 1>;	// number, type, routing
+			interrupt-parent = <&fpga_pic>;
+		};
+	};
+
+	pci0: pci@e0008000 {
+		cell-index = <0>;
+		#interrupt-cells = <1>;
+		#size-cells = <2>;
+		#address-cells = <3>;
+		compatible = "fsl,mpc8540-pci";
+		device_type = "pci";
+		reg = <0xe0008000 0x1000>;
+		clock-frequency = <66666666>;
+
+		interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
+		interrupt-map = <
+				/* IDSEL 0x11 */
+				 0x8800 0x0 0x0 1 &mpic 5 1
+				/* IDSEL 0x12 */
+				 0x9000 0x0 0x0 1 &mpic 4 1>;
+		interrupt-parent = <&mpic>;
+		interrupts = <24 2>;
+		bus-range = <0x0 0x0>;
+		ranges = <0x02000000 0x0 0x80000000 0x80000000 0x0 0x20000000
+			  0x01000000 0x0 0x00000000 0xe2000000 0x0 0x01000000>;
+	};
+
+};