diff options
author | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
---|---|---|
committer | Linus Torvalds <torvalds@ppc970.osdl.org> | 2005-04-16 15:20:36 -0700 |
commit | 1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch) | |
tree | 0bba044c4ce775e45a88a51686b5d9f90697ea9d /arch/ppc/platforms/rpx8260.h | |
download | kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2 |
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.
Let it rip!
Diffstat (limited to 'arch/ppc/platforms/rpx8260.h')
-rw-r--r-- | arch/ppc/platforms/rpx8260.h | 81 |
1 files changed, 81 insertions, 0 deletions
diff --git a/arch/ppc/platforms/rpx8260.h b/arch/ppc/platforms/rpx8260.h new file mode 100644 index 0000000..843494a --- /dev/null +++ b/arch/ppc/platforms/rpx8260.h @@ -0,0 +1,81 @@ +/* + * A collection of structures, addresses, and values associated with + * the Embedded Planet RPX6 (or RPX Super) MPC8260 board. + * Copied from the RPX-Classic and SBS8260 stuff. + * + * Copyright (c) 2001 Dan Malek <dan@embeddededge.com> + */ +#ifdef __KERNEL__ +#ifndef __ASM_PLATFORMS_RPX8260_H__ +#define __ASM_PLATFORMS_RPX8260_H__ + +/* A Board Information structure that is given to a program when + * prom starts it up. + */ +typedef struct bd_info { + unsigned int bi_memstart; /* Memory start address */ + unsigned int bi_memsize; /* Memory (end) size in bytes */ + unsigned int bi_nvsize; /* NVRAM size in bytes (can be 0) */ + unsigned int bi_intfreq; /* Internal Freq, in Hz */ + unsigned int bi_busfreq; /* Bus Freq, in MHz */ + unsigned int bi_cpmfreq; /* CPM Freq, in MHz */ + unsigned int bi_brgfreq; /* BRG Freq, in MHz */ + unsigned int bi_vco; /* VCO Out from PLL */ + unsigned int bi_baudrate; /* Default console baud rate */ + unsigned int bi_immr; /* IMMR when called from boot rom */ + unsigned char bi_enetaddr[6]; +} bd_t; + +extern bd_t m8xx_board_info; + +/* Memory map is configured by the PROM startup. + * We just map a few things we need. The CSR is actually 4 byte-wide + * registers that can be accessed as 8-, 16-, or 32-bit values. + */ +#define CPM_MAP_ADDR ((uint)0xf0000000) +#define RPX_CSR_ADDR ((uint)0xfa000000) +#define RPX_CSR_SIZE ((uint)(512 * 1024)) +#define RPX_NVRTC_ADDR ((uint)0xfa080000) +#define RPX_NVRTC_SIZE ((uint)(512 * 1024)) + +/* The RPX6 has 16, byte wide control/status registers. + * Not all are used (yet). + */ +extern volatile u_char *rpx6_csr_addr; + +/* Things of interest in the CSR. +*/ +#define BCSR0_ID_MASK ((u_char)0xf0) /* Read only */ +#define BCSR0_SWITCH_MASK ((u_char)0x0f) /* Read only */ +#define BCSR1_XCVR_SMC1 ((u_char)0x80) +#define BCSR1_XCVR_SMC2 ((u_char)0x40) +#define BCSR2_FLASH_WENABLE ((u_char)0x20) +#define BCSR2_NVRAM_ENABLE ((u_char)0x10) +#define BCSR2_ALT_IRQ2 ((u_char)0x08) +#define BCSR2_ALT_IRQ3 ((u_char)0x04) +#define BCSR2_PRST ((u_char)0x02) /* Force reset */ +#define BCSR2_ENPRST ((u_char)0x01) /* Enable POR */ +#define BCSR3_MODCLK_MASK ((u_char)0xe0) +#define BCSR3_ENCLKHDR ((u_char)0x10) +#define BCSR3_LED5 ((u_char)0x04) /* 0 == on */ +#define BCSR3_LED6 ((u_char)0x02) /* 0 == on */ +#define BCSR3_LED7 ((u_char)0x01) /* 0 == on */ +#define BCSR4_EN_PHY ((u_char)0x80) /* Enable PHY */ +#define BCSR4_EN_MII ((u_char)0x40) /* Enable PHY */ +#define BCSR4_MII_READ ((u_char)0x04) +#define BCSR4_MII_MDC ((u_char)0x02) +#define BCSR4_MII_MDIO ((u_char)0x01) +#define BCSR13_FETH_IRQMASK ((u_char)0xf0) +#define BCSR15_FETH_IRQ ((u_char)0x20) + +#define PHY_INTERRUPT SIU_INT_IRQ7 + +/* For our show_cpuinfo hooks. */ +#define CPUINFO_VENDOR "Embedded Planet" +#define CPUINFO_MACHINE "EP8260 PowerPC" + +/* Warm reset vector. */ +#define BOOTROM_RESTART_ADDR ((uint)0xfff00104) + +#endif /* __ASM_PLATFORMS_RPX8260_H__ */ +#endif /* __KERNEL__ */ |