merged 3.0.101 tag

6 files changed, 33 insertions, 9 deletions

diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig
index 75afa75..34575fb 100644
--- a/drivers/ata/Kconfig
+++ b/drivers/ata/Kconfig
@@ -93,7 +93,7 @@ config SATA_FSL
 	  If unsure, say N.
 
 config SATA_INIC162X
-	tristate "Initio 162x SATA support"
+	tristate "Initio 162x SATA support (Very Experimental)"
 	depends on PCI
 	help
 	  This option enables support for Initio 162x Serial ATA.
diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c
index 75a8d0f..f3d09f3 100644
--- a/drivers/ata/ahci.c
+++ b/drivers/ata/ahci.c
@@ -284,6 +284,7 @@ static const struct pci_device_id ahci_pci_tbl[] = {
 
 	/* AMD */
 	{ PCI_VDEVICE(AMD, 0x7800), board_ahci }, /* AMD Hudson-2 */
+	{ PCI_VDEVICE(AMD, 0x7900), board_ahci }, /* AMD CZ */
 	/* AMD is using RAID class only for ahci controllers */
 	{ PCI_VENDOR_ID_AMD, PCI_ANY_ID, PCI_ANY_ID, PCI_ANY_ID,
 	  PCI_CLASS_STORAGE_RAID << 8, 0xffffff, board_ahci },
diff --git a/drivers/ata/libahci.c b/drivers/ata/libahci.c
index 41223c7..b64e4a7 100644
--- a/drivers/ata/libahci.c
+++ b/drivers/ata/libahci.c
@@ -1495,8 +1495,7 @@ static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
 		u32 fbs = readl(port_mmio + PORT_FBS);
 		int pmp = fbs >> PORT_FBS_DWE_OFFSET;
 
-		if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links) &&
-		    ata_link_online(&ap->pmp_link[pmp])) {
+		if ((fbs & PORT_FBS_SDE) && (pmp < ap->nr_pmp_links)) {
 			link = &ap->pmp_link[pmp];
 			fbs_need_dec = true;
 		}
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 5a72e36..aa5f055 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -1599,6 +1599,12 @@ unsigned ata_exec_internal_sg(struct ata_device *dev,
 	qc->tf = *tf;
 	if (cdb)
 		memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
+
+	/* some SATA bridges need us to indicate data xfer direction */
+	if (tf->protocol == ATAPI_PROT_DMA && (dev->flags & ATA_DFLAG_DMADIR) &&
+	    dma_dir == DMA_FROM_DEVICE)
+		qc->tf.feature |= ATAPI_DMADIR;
+
 	qc->flags |= ATA_QCFLAG_RESULT_TF;
 	qc->dma_dir = dma_dir;
 	if (dma_dir != DMA_NONE) {
@@ -2412,6 +2418,9 @@ int ata_dev_configure(struct ata_device *dev)
 		dev->max_sectors = min_t(unsigned int, ATA_MAX_SECTORS_128,
 					 dev->max_sectors);
 
+	if (dev->horkage & ATA_HORKAGE_MAX_SEC_LBA48)
+		dev->max_sectors = ATA_MAX_SECTORS_LBA48;
+
 	if (ap->ops->dev_config)
 		ap->ops->dev_config(dev);
 
@@ -4077,6 +4086,7 @@ static const struct ata_blacklist_entry ata_device_blacklist [] = {
 	/* Weird ATAPI devices */
 	{ "TORiSAN DVD-ROM DRD-N216", NULL,	ATA_HORKAGE_MAX_SEC_128 },
 	{ "QUANTUM DAT    DAT72-000", NULL,	ATA_HORKAGE_ATAPI_MOD16_DMA },
+	{ "Slimtype DVD A  DS8A8SH", NULL,	ATA_HORKAGE_MAX_SEC_LBA48 },
 
 	/* Devices we expect to fail diagnostics */
 
diff --git a/drivers/ata/libata-pmp.c b/drivers/ata/libata-pmp.c
index f06b7ea..cf9dc09 100644
--- a/drivers/ata/libata-pmp.c
+++ b/drivers/ata/libata-pmp.c
@@ -288,24 +288,24 @@ static int sata_pmp_configure(struct ata_device *dev, int print_info)
 
 	/* Disable sending Early R_OK.
 	 * With "cached read" HDD testing and multiple ports busy on a SATA
-	 * host controller, 3726 PMP will very rarely drop a deferred
+	 * host controller, 3x26 PMP will very rarely drop a deferred
 	 * R_OK that was intended for the host. Symptom will be all
 	 * 5 drives under test will timeout, get reset, and recover.
 	 */
-	if (vendor == 0x1095 && devid == 0x3726) {
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
 		u32 reg;
 
 		err_mask = sata_pmp_read(&ap->link, PMP_GSCR_SII_POL, &reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to read Sil3726 Private Register";
+			reason = "failed to read Sil3x26 Private Register";
 			goto fail;
 		}
 		reg &= ~0x1;
 		err_mask = sata_pmp_write(&ap->link, PMP_GSCR_SII_POL, reg);
 		if (err_mask) {
 			rc = -EIO;
-			reason = "failed to write Sil3726 Private Register";
+			reason = "failed to write Sil3x26 Private Register";
 			goto fail;
 		}
 	}
@@ -383,8 +383,8 @@ static void sata_pmp_quirks(struct ata_port *ap)
 	u16 devid = sata_pmp_gscr_devid(gscr);
 	struct ata_link *link;
 
-	if (vendor == 0x1095 && devid == 0x3726) {
-		/* sil3726 quirks */
+	if (vendor == 0x1095 && (devid == 0x3726 || devid == 0x3826)) {
+		/* sil3x26 quirks */
 		ata_for_each_link(link, ap, EDGE) {
 			/* link reports offline after LPM */
 			link->flags |= ATA_LFLAG_NO_LPM;
diff --git a/drivers/ata/sata_inic162x.c b/drivers/ata/sata_inic162x.c
index 83a4447..15391ee 100644
--- a/drivers/ata/sata_inic162x.c
+++ b/drivers/ata/sata_inic162x.c
@@ -6,6 +6,18 @@
  *
  * This file is released under GPL v2.
  *
+ * **** WARNING ****
+ *
+ * This driver never worked properly and unfortunately data corruption is
+ * relatively common.  There isn't anyone working on the driver and there's
+ * no support from the vendor.  Do not use this driver in any production
+ * environment.
+ *
+ * http://thread.gmane.org/gmane.linux.debian.devel.bugs.rc/378525/focus=54491
+ * https://bugzilla.kernel.org/show_bug.cgi?id=60565
+ *
+ * *****************
+ *
  * This controller is eccentric and easily locks up if something isn't
  * right.  Documentation is available at initio's website but it only
  * documents registers (not programming model).
@@ -810,6 +822,8 @@ static int inic_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
 	if (!printed_version++)
 		dev_printk(KERN_DEBUG, &pdev->dev, "version " DRV_VERSION "\n");
 
+	dev_alert(&pdev->dev, "inic162x support is broken with common data corruption issues and will be disabled by default, contact linux-ide@vger.kernel.org if in production use\n");
+
 	/* alloc host */
 	host = ata_host_alloc_pinfo(&pdev->dev, ppi, NR_PORTS);
 	hpriv = devm_kzalloc(&pdev->dev, sizeof(*hpriv), GFP_KERNEL);