aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/block/paride/epat.c
diff options
context:
space:
mode:
authorLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
committerLinus Torvalds <torvalds@ppc970.osdl.org>2005-04-16 15:20:36 -0700
commit1da177e4c3f41524e886b7f1b8a0c1fc7321cac2 (patch)
tree0bba044c4ce775e45a88a51686b5d9f90697ea9d /drivers/block/paride/epat.c
downloadkernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.zip
kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.gz
kernel_samsung_smdk4412-1da177e4c3f41524e886b7f1b8a0c1fc7321cac2.tar.bz2
Linux-2.6.12-rc2
Initial git repository build. I'm not bothering with the full history, even though we have it. We can create a separate "historical" git archive of that later if we want to, and in the meantime it's about 3.2GB when imported into git - space that would just make the early git days unnecessarily complicated, when we don't have a lot of good infrastructure for it. Let it rip!
Diffstat (limited to 'drivers/block/paride/epat.c')
-rw-r--r--drivers/block/paride/epat.c340
1 files changed, 340 insertions, 0 deletions
diff --git a/drivers/block/paride/epat.c b/drivers/block/paride/epat.c
new file mode 100644
index 0000000..55d1c0a
--- /dev/null
+++ b/drivers/block/paride/epat.c
@@ -0,0 +1,340 @@
+/*
+ epat.c (c) 1997-8 Grant R. Guenther <grant@torque.net>
+ Under the terms of the GNU General Public License.
+
+ This is the low level protocol driver for the EPAT parallel
+ to IDE adapter from Shuttle Technologies. This adapter is
+ used in many popular parallel port disk products such as the
+ SyQuest EZ drives, the Avatar Shark and the Imation SuperDisk.
+
+*/
+
+/* Changes:
+
+ 1.01 GRG 1998.05.06 init_proto, release_proto
+ 1.02 Joshua b. Jore CPP(renamed), epat_connect, epat_disconnect
+
+*/
+
+#define EPAT_VERSION "1.02"
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/wait.h>
+#include <asm/io.h>
+
+#include "paride.h"
+
+#define j44(a,b) (((a>>4)&0x0f)+(b&0xf0))
+#define j53(a,b) (((a>>3)&0x1f)+((b<<4)&0xe0))
+
+static int epatc8;
+
+module_param(epatc8, int, 0);
+MODULE_PARM_DESC(epatc8, "support for the Shuttle EP1284 chip, "
+ "used in any recent Imation SuperDisk (LS-120) drive.");
+
+/* cont = 0 IDE register file
+ cont = 1 IDE control registers
+ cont = 2 internal EPAT registers
+*/
+
+static int cont_map[3] = { 0x18, 0x10, 0 };
+
+static void epat_write_regr( PIA *pi, int cont, int regr, int val)
+
+{ int r;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w0(0x60+r); w2(1); w0(val); w2(4);
+ break;
+
+ case 3:
+ case 4:
+ case 5: w3(0x40+r); w4(val);
+ break;
+
+ }
+}
+
+static int epat_read_regr( PIA *pi, int cont, int regr )
+
+{ int a, b, r;
+
+ r = regr + cont_map[cont];
+
+ switch (pi->mode) {
+
+ case 0: w0(r); w2(1); w2(3);
+ a = r1(); w2(4); b = r1();
+ return j44(a,b);
+
+ case 1: w0(0x40+r); w2(1); w2(4);
+ a = r1(); b = r2(); w0(0xff);
+ return j53(a,b);
+
+ case 2: w0(0x20+r); w2(1); w2(0x25);
+ a = r0(); w2(4);
+ return a;
+
+ case 3:
+ case 4:
+ case 5: w3(r); w2(0x24); a = r4(); w2(4);
+ return a;
+
+ }
+ return -1; /* never gets here */
+}
+
+static void epat_read_block( PIA *pi, char * buf, int count )
+
+{ int k, ph, a, b;
+
+ switch (pi->mode) {
+
+ case 0: w0(7); w2(1); w2(3); w0(0xff);
+ ph = 0;
+ for(k=0;k<count;k++) {
+ if (k == count-1) w0(0xfd);
+ w2(6+ph); a = r1();
+ if (a & 8) b = a;
+ else { w2(4+ph); b = r1(); }
+ buf[k] = j44(a,b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+
+ case 1: w0(0x47); w2(1); w2(5); w0(0xff);
+ ph = 0;
+ for(k=0;k<count;k++) {
+ if (k == count-1) w0(0xfd);
+ w2(4+ph);
+ a = r1(); b = r2();
+ buf[k] = j53(a,b);
+ ph = 1 - ph;
+ }
+ w0(0); w2(4);
+ break;
+
+ case 2: w0(0x27); w2(1); w2(0x25); w0(0);
+ ph = 0;
+ for(k=0;k<count-1;k++) {
+ w2(0x24+ph);
+ buf[k] = r0();
+ ph = 1 - ph;
+ }
+ w2(0x26); w2(0x27); buf[count-1] = r0();
+ w2(0x25); w2(4);
+ break;
+
+ case 3: w3(0x80); w2(0x24);
+ for(k=0;k<count-1;k++) buf[k] = r4();
+ w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 4: w3(0x80); w2(0x24);
+ for(k=0;k<(count/2)-1;k++) ((u16 *)buf)[k] = r4w();
+ buf[count-2] = r4();
+ w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+ w2(4);
+ break;
+
+ case 5: w3(0x80); w2(0x24);
+ for(k=0;k<(count/4)-1;k++) ((u32 *)buf)[k] = r4l();
+ for(k=count-4;k<count-1;k++) buf[k] = r4();
+ w2(4); w3(0xa0); w2(0x24); buf[count-1] = r4();
+ w2(4);
+ break;
+
+ }
+}
+
+static void epat_write_block( PIA *pi, char * buf, int count )
+
+{ int ph, k;
+
+ switch (pi->mode) {
+
+ case 0:
+ case 1:
+ case 2: w0(0x67); w2(1); w2(5);
+ ph = 0;
+ for(k=0;k<count;k++) {
+ w0(buf[k]);
+ w2(4+ph);
+ ph = 1 - ph;
+ }
+ w2(7); w2(4);
+ break;
+
+ case 3: w3(0xc0);
+ for(k=0;k<count;k++) w4(buf[k]);
+ w2(4);
+ break;
+
+ case 4: w3(0xc0);
+ for(k=0;k<(count/2);k++) w4w(((u16 *)buf)[k]);
+ w2(4);
+ break;
+
+ case 5: w3(0xc0);
+ for(k=0;k<(count/4);k++) w4l(((u32 *)buf)[k]);
+ w2(4);
+ break;
+
+ }
+}
+
+/* these macros access the EPAT registers in native addressing */
+
+#define WR(r,v) epat_write_regr(pi,2,r,v)
+#define RR(r) (epat_read_regr(pi,2,r))
+
+/* and these access the IDE task file */
+
+#define WRi(r,v) epat_write_regr(pi,0,r,v)
+#define RRi(r) (epat_read_regr(pi,0,r))
+
+/* FIXME: the CPP stuff should be fixed to handle multiple EPATs on a chain */
+
+#define CPP(x) w2(4);w0(0x22);w0(0xaa);w0(0x55);w0(0);w0(0xff);\
+ w0(0x87);w0(0x78);w0(x);w2(4);w2(5);w2(4);w0(0xff);
+
+static void epat_connect ( PIA *pi )
+
+{ pi->saved_r0 = r0();
+ pi->saved_r2 = r2();
+
+ /* Initialize the chip */
+ CPP(0);
+
+ if (epatc8) {
+ CPP(0x40);CPP(0xe0);
+ w0(0);w2(1);w2(4);
+ WR(0x8,0x12);WR(0xc,0x14);WR(0x12,0x10);
+ WR(0xe,0xf);WR(0xf,4);
+ /* WR(0xe,0xa);WR(0xf,4); */
+ WR(0xe,0xd);WR(0xf,0);
+ /* CPP(0x30); */
+ }
+
+ /* Connect to the chip */
+ CPP(0xe0);
+ w0(0);w2(1);w2(4); /* Idle into SPP */
+ if (pi->mode >= 3) {
+ w0(0);w2(1);w2(4);w2(0xc);
+ /* Request EPP */
+ w0(0x40);w2(6);w2(7);w2(4);w2(0xc);w2(4);
+ }
+
+ if (!epatc8) {
+ WR(8,0x10); WR(0xc,0x14); WR(0xa,0x38); WR(0x12,0x10);
+ }
+}
+
+static void epat_disconnect (PIA *pi)
+{ CPP(0x30);
+ w0(pi->saved_r0);
+ w2(pi->saved_r2);
+}
+
+static int epat_test_proto( PIA *pi, char * scratch, int verbose )
+
+{ int k, j, f, cc;
+ int e[2] = {0,0};
+
+ epat_connect(pi);
+ cc = RR(0xd);
+ epat_disconnect(pi);
+
+ epat_connect(pi);
+ for (j=0;j<2;j++) {
+ WRi(6,0xa0+j*0x10);
+ for (k=0;k<256;k++) {
+ WRi(2,k^0xaa);
+ WRi(3,k^0x55);
+ if (RRi(2) != (k^0xaa)) e[j]++;
+ }
+ }
+ epat_disconnect(pi);
+
+ f = 0;
+ epat_connect(pi);
+ WR(0x13,1); WR(0x13,0); WR(0xa,0x11);
+ epat_read_block(pi,scratch,512);
+
+ for (k=0;k<256;k++) {
+ if ((scratch[2*k] & 0xff) != k) f++;
+ if ((scratch[2*k+1] & 0xff) != (0xff-k)) f++;
+ }
+ epat_disconnect(pi);
+
+ if (verbose) {
+ printk("%s: epat: port 0x%x, mode %d, ccr %x, test=(%d,%d,%d)\n",
+ pi->device,pi->port,pi->mode,cc,e[0],e[1],f);
+ }
+
+ return (e[0] && e[1]) || f;
+}
+
+static void epat_log_adapter( PIA *pi, char * scratch, int verbose )
+
+{ int ver;
+ char *mode_string[6] =
+ {"4-bit","5/3","8-bit","EPP-8","EPP-16","EPP-32"};
+
+ epat_connect(pi);
+ WR(0xa,0x38); /* read the version code */
+ ver = RR(0xb);
+ epat_disconnect(pi);
+
+ printk("%s: epat %s, Shuttle EPAT chip %x at 0x%x, ",
+ pi->device,EPAT_VERSION,ver,pi->port);
+ printk("mode %d (%s), delay %d\n",pi->mode,
+ mode_string[pi->mode],pi->delay);
+
+}
+
+static struct pi_protocol epat = {
+ .owner = THIS_MODULE,
+ .name = "epat",
+ .max_mode = 6,
+ .epp_first = 3,
+ .default_delay = 1,
+ .max_units = 1,
+ .write_regr = epat_write_regr,
+ .read_regr = epat_read_regr,
+ .write_block = epat_write_block,
+ .read_block = epat_read_block,
+ .connect = epat_connect,
+ .disconnect = epat_disconnect,
+ .test_proto = epat_test_proto,
+ .log_adapter = epat_log_adapter,
+};
+
+static int __init epat_init(void)
+{
+#ifdef CONFIG_PARIDE_EPATC8
+ epatc8 = 1;
+#endif
+ return pi_register(&epat)-1;
+}
+
+static void __exit epat_exit(void)
+{
+ pi_unregister(&epat);
+}
+
+MODULE_LICENSE("GPL");
+module_init(epat_init)
+module_exit(epat_exit)