Merge branch 'next' of git://github.com/kernelslacker/cpufreq

* 'next' of git://github.com/kernelslacker/cpufreq:
  [CPUFREQ] db8500: support all frequencies
  [CPUFREQ] db8500: remove unneeded for loop iteration over freq_table
  [CPUFREQ] ARM Exynos4210 PM/Suspend compatibility with different bootloaders
  [CPUFREQ] ARM: ux500: send cpufreq notification for all cpus
  [CPUFREQ] e_powersaver: Allow user to lower maximum voltage
  [CPUFREQ] e_powersaver: Check BIOS limit for CPU frequency
  [CPUFREQ] e_powersaver: Additional checks
  [CPUFREQ] exynos4210: Show list of available frequencies

3 files changed, 268 insertions, 32 deletions

diff --git a/drivers/cpufreq/db8500-cpufreq.c b/drivers/cpufreq/db8500-cpufreq.c
index 8e89dcf..edaa987 100644
--- a/drivers/cpufreq/db8500-cpufreq.c
+++ b/drivers/cpufreq/db8500-cpufreq.c
@@ -18,24 +18,29 @@
 static struct cpufreq_frequency_table freq_table[] = {
 	[0] = {
 		.index = 0,
-		.frequency = 300000,
+		.frequency = 200000,
 	},
 	[1] = {
 		.index = 1,
-		.frequency = 600000,
+		.frequency = 300000,
 	},
 	[2] = {
-		/* Used for MAX_OPP, if available */
 		.index = 2,
-		.frequency = CPUFREQ_TABLE_END,
+		.frequency = 600000,
 	},
 	[3] = {
+		/* Used for MAX_OPP, if available */
 		.index = 3,
 		.frequency = CPUFREQ_TABLE_END,
 	},
+	[4] = {
+		.index = 4,
+		.frequency = CPUFREQ_TABLE_END,
+	},
 };
 
 static enum arm_opp idx2opp[] = {
+	ARM_EXTCLK,
 	ARM_50_OPP,
 	ARM_100_OPP,
 	ARM_MAX_OPP
@@ -72,13 +77,13 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy,
 
 	freqs.old = policy->cur;
 	freqs.new = freq_table[idx].frequency;
-	freqs.cpu = policy->cpu;
 
 	if (freqs.old == freqs.new)
 		return 0;
 
 	/* pre-change notification */
-	cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
+	for_each_cpu(freqs.cpu, policy->cpus)
+		cpufreq_notify_transition(&freqs, CPUFREQ_PRECHANGE);
 
 	/* request the PRCM unit for opp change */
 	if (prcmu_set_arm_opp(idx2opp[idx])) {
@@ -87,7 +92,8 @@ static int db8500_cpufreq_target(struct cpufreq_policy *policy,
 	}
 
 	/* post change notification */
-	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
+	for_each_cpu(freqs.cpu, policy->cpus)
+		cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
 	return 0;
 }
@@ -104,16 +110,18 @@ static unsigned int db8500_cpufreq_getspeed(unsigned int cpu)
 static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
 {
 	int res;
-	int i;
 
 	BUILD_BUG_ON(ARRAY_SIZE(idx2opp) + 1 != ARRAY_SIZE(freq_table));
 
-	if (cpu_is_u8500v2() && !prcmu_is_u8400()) {
-		freq_table[0].frequency = 400000;
-		freq_table[1].frequency = 800000;
+	if (!prcmu_is_u8400()) {
+		freq_table[1].frequency = 400000;
+		freq_table[2].frequency = 800000;
 		if (prcmu_has_arm_maxopp())
-			freq_table[2].frequency = 1000000;
+			freq_table[3].frequency = 1000000;
 	}
+	pr_info("db8500-cpufreq : Available frequencies:\n");
+	while (freq_table[i].frequency != CPUFREQ_TABLE_END)
+		pr_info("  %d Mhz\n", freq_table[i++].frequency/1000);
 
 	/* get policy fields based on the table */
 	res = cpufreq_frequency_table_cpuinfo(policy, freq_table);
@@ -127,10 +135,6 @@ static int __cpuinit db8500_cpufreq_init(struct cpufreq_policy *policy)
 	policy->min = policy->cpuinfo.min_freq;
 	policy->max = policy->cpuinfo.max_freq;
 	policy->cur = db8500_cpufreq_getspeed(policy->cpu);
-
-	for (i = 0; freq_table[i].frequency != policy->cur; i++)
-		;
-
 	policy->governor = CPUFREQ_DEFAULT_GOVERNOR;
 
 	/*
diff --git a/drivers/cpufreq/e_powersaver.c b/drivers/cpufreq/e_powersaver.c
index 35a257d..4bd6815 100644
--- a/drivers/cpufreq/e_powersaver.c
+++ b/drivers/cpufreq/e_powersaver.c
@@ -19,6 +19,11 @@
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+#include <linux/acpi.h>
+#include <acpi/processor.h>
+#endif
+
 #define EPS_BRAND_C7M	0
 #define EPS_BRAND_C7	1
 #define EPS_BRAND_EDEN	2
@@ -27,11 +32,59 @@
 
 struct eps_cpu_data {
 	u32 fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	u32 bios_limit;
+#endif
 	struct cpufreq_frequency_table freq_table[];
 };
 
 static struct eps_cpu_data *eps_cpu[NR_CPUS];
 
+/* Module parameters */
+static int freq_failsafe_off;
+static int voltage_failsafe_off;
+static int set_max_voltage;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+static int ignore_acpi_limit;
+
+static struct acpi_processor_performance *eps_acpi_cpu_perf;
+
+/* Minimum necessary to get acpi_processor_get_bios_limit() working */
+static int eps_acpi_init(void)
+{
+	eps_acpi_cpu_perf = kzalloc(sizeof(struct acpi_processor_performance),
+				      GFP_KERNEL);
+	if (!eps_acpi_cpu_perf)
+		return -ENOMEM;
+
+	if (!zalloc_cpumask_var(&eps_acpi_cpu_perf->shared_cpu_map,
+								GFP_KERNEL)) {
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+		return -ENOMEM;
+	}
+
+	if (acpi_processor_register_performance(eps_acpi_cpu_perf, 0)) {
+		free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+		return -EIO;
+	}
+	return 0;
+}
+
+static int eps_acpi_exit(struct cpufreq_policy *policy)
+{
+	if (eps_acpi_cpu_perf) {
+		acpi_processor_unregister_performance(eps_acpi_cpu_perf, 0);
+		free_cpumask_var(eps_acpi_cpu_perf->shared_cpu_map);
+		kfree(eps_acpi_cpu_perf);
+		eps_acpi_cpu_perf = NULL;
+	}
+	return 0;
+}
+#endif
 
 static unsigned int eps_get(unsigned int cpu)
 {
@@ -164,6 +217,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 	int k, step, voltage;
 	int ret;
 	int states;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	unsigned int limit;
+#endif
 
 	if (policy->cpu != 0)
 		return -ENODEV;
@@ -244,11 +300,62 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 		return -EINVAL;
 	if (current_voltage > 0x1f || max_voltage > 0x1f)
 		return -EINVAL;
-	if (max_voltage < min_voltage)
+	if (max_voltage < min_voltage
+	    || current_voltage < min_voltage
+	    || current_voltage > max_voltage)
 		return -EINVAL;
 
+	/* Check for systems using underclocked CPU */
+	if (!freq_failsafe_off && max_multiplier != current_multiplier) {
+		printk(KERN_INFO "eps: Your processor is running at different "
+			"frequency then its maximum. Aborting.\n");
+		printk(KERN_INFO "eps: You can use freq_failsafe_off option "
+			"to disable this check.\n");
+		return -EINVAL;
+	}
+	if (!voltage_failsafe_off && max_voltage != current_voltage) {
+		printk(KERN_INFO "eps: Your processor is running at different "
+			"voltage then its maximum. Aborting.\n");
+		printk(KERN_INFO "eps: You can use voltage_failsafe_off "
+			"option to disable this check.\n");
+		return -EINVAL;
+	}
+
 	/* Calc FSB speed */
 	fsb = cpu_khz / current_multiplier;
+
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	/* Check for ACPI processor speed limit */
+	if (!ignore_acpi_limit && !eps_acpi_init()) {
+		if (!acpi_processor_get_bios_limit(policy->cpu, &limit)) {
+			printk(KERN_INFO "eps: ACPI limit %u.%uGHz\n",
+				limit/1000000,
+				(limit%1000000)/10000);
+			eps_acpi_exit(policy);
+			/* Check if max_multiplier is in BIOS limits */
+			if (limit && max_multiplier * fsb > limit) {
+				printk(KERN_INFO "eps: Aborting.\n");
+				return -EINVAL;
+			}
+		}
+	}
+#endif
+
+	/* Allow user to set lower maximum voltage then that reported
+	 * by processor */
+	if (brand == EPS_BRAND_C7M && set_max_voltage) {
+		u32 v;
+
+		/* Change mV to something hardware can use */
+		v = (set_max_voltage - 700) / 16;
+		/* Check if voltage is within limits */
+		if (v >= min_voltage && v <= max_voltage) {
+			printk(KERN_INFO "eps: Setting %dmV as maximum.\n",
+				v * 16 + 700);
+			max_voltage = v;
+		}
+	}
+
 	/* Calc number of p-states supported */
 	if (brand == EPS_BRAND_C7M)
 		states = max_multiplier - min_multiplier + 1;
@@ -265,6 +372,9 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 
 	/* Copy basic values */
 	centaur->fsb = fsb;
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+	centaur->bios_limit = limit;
+#endif
 
 	/* Fill frequency and MSR value table */
 	f_table = &centaur->freq_table[0];
@@ -303,17 +413,7 @@ static int eps_cpu_init(struct cpufreq_policy *policy)
 static int eps_cpu_exit(struct cpufreq_policy *policy)
 {
 	unsigned int cpu = policy->cpu;
-	struct eps_cpu_data *centaur;
-	u32 lo, hi;
 
-	if (eps_cpu[cpu] == NULL)
-		return -ENODEV;
-	centaur = eps_cpu[cpu];
-
-	/* Get max frequency */
-	rdmsr(MSR_IA32_PERF_STATUS, lo, hi);
-	/* Set max frequency */
-	eps_set_state(centaur, cpu, hi & 0xffff);
 	/* Bye */
 	cpufreq_frequency_table_put_attr(policy->cpu);
 	kfree(eps_cpu[cpu]);
@@ -359,6 +459,19 @@ static void __exit eps_exit(void)
 	cpufreq_unregister_driver(&eps_driver);
 }
 
+/* Allow user to overclock his machine or to change frequency to higher after
+ * unloading module */
+module_param(freq_failsafe_off, int, 0644);
+MODULE_PARM_DESC(freq_failsafe_off, "Disable current vs max frequency check");
+module_param(voltage_failsafe_off, int, 0644);
+MODULE_PARM_DESC(voltage_failsafe_off, "Disable current vs max voltage check");
+#if defined CONFIG_ACPI_PROCESSOR || defined CONFIG_ACPI_PROCESSOR_MODULE
+module_param(ignore_acpi_limit, int, 0644);
+MODULE_PARM_DESC(ignore_acpi_limit, "Don't check ACPI's processor speed limit");
+#endif
+module_param(set_max_voltage, int, 0644);
+MODULE_PARM_DESC(set_max_voltage, "Set maximum CPU voltage (mV) C7-M only");
+
 MODULE_AUTHOR("Rafal Bilski <rafalbilski@interia.pl>");
 MODULE_DESCRIPTION("Enhanced PowerSaver driver for VIA C7 CPU's.");
 MODULE_LICENSE("GPL");
diff --git a/drivers/cpufreq/exynos4210-cpufreq.c b/drivers/cpufreq/exynos4210-cpufreq.c
index b7c3a84..ab9741f 100644
--- a/drivers/cpufreq/exynos4210-cpufreq.c
+++ b/drivers/cpufreq/exynos4210-cpufreq.c
@@ -17,6 +17,8 @@
 #include <linux/slab.h>
 #include <linux/regulator/consumer.h>
 #include <linux/cpufreq.h>
+#include <linux/notifier.h>
+#include <linux/suspend.h>
 
 #include <mach/map.h>
 #include <mach/regs-clock.h>
@@ -36,6 +38,10 @@ static struct regulator *int_regulator;
 static struct cpufreq_freqs freqs;
 static unsigned int memtype;
 
+static unsigned int locking_frequency;
+static bool frequency_locked;
+static DEFINE_MUTEX(cpufreq_lock);
+
 enum exynos4_memory_type {
 	DDR2 = 4,
 	LPDDR2,
@@ -405,22 +411,32 @@ static int exynos4_target(struct cpufreq_policy *policy,
 {
 	unsigned int index, old_index;
 	unsigned int arm_volt, int_volt;
+	int err = -EINVAL;
 
 	freqs.old = exynos4_getspeed(policy->cpu);
 
+	mutex_lock(&cpufreq_lock);
+
+	if (frequency_locked && target_freq != locking_frequency) {
+		err = -EAGAIN;
+		goto out;
+	}
+
 	if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
 					   freqs.old, relation, &old_index))
-		return -EINVAL;
+		goto out;
 
 	if (cpufreq_frequency_table_target(policy, exynos4_freq_table,
 					   target_freq, relation, &index))
-		return -EINVAL;
+		goto out;
+
+	err = 0;
 
 	freqs.new = exynos4_freq_table[index].frequency;
 	freqs.cpu = policy->cpu;
 
 	if (freqs.new == freqs.old)
-		return 0;
+		goto out;
 
 	/* get the voltage value */
 	arm_volt = exynos4_volt_table[index].arm_volt;
@@ -447,10 +463,16 @@ static int exynos4_target(struct cpufreq_policy *policy,
 
 	cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
 
-	return 0;
+out:
+	mutex_unlock(&cpufreq_lock);
+	return err;
 }
 
 #ifdef CONFIG_PM
+/*
+ * These suspend/resume are used as syscore_ops, it is already too
+ * late to set regulator voltages at this stage.
+ */
 static int exynos4_cpufreq_suspend(struct cpufreq_policy *policy)
 {
 	return 0;
@@ -462,8 +484,82 @@ static int exynos4_cpufreq_resume(struct cpufreq_policy *policy)
 }
 #endif
 
+/**
+ * exynos4_cpufreq_pm_notifier - block CPUFREQ's activities in suspend-resume
+ *			context
+ * @notifier
+ * @pm_event
+ * @v
+ *
+ * While frequency_locked == true, target() ignores every frequency but
+ * locking_frequency. The locking_frequency value is the initial frequency,
+ * which is set by the bootloader. In order to eliminate possible
+ * inconsistency in clock values, we save and restore frequencies during
+ * suspend and resume and block CPUFREQ activities. Note that the standard
+ * suspend/resume cannot be used as they are too deep (syscore_ops) for
+ * regulator actions.
+ */
+static int exynos4_cpufreq_pm_notifier(struct notifier_block *notifier,
+				       unsigned long pm_event, void *v)
+{
+	struct cpufreq_policy *policy = cpufreq_cpu_get(0); /* boot CPU */
+	static unsigned int saved_frequency;
+	unsigned int temp;
+
+	mutex_lock(&cpufreq_lock);
+	switch (pm_event) {
+	case PM_SUSPEND_PREPARE:
+		if (frequency_locked)
+			goto out;
+		frequency_locked = true;
+
+		if (locking_frequency) {
+			saved_frequency = exynos4_getspeed(0);
+
+			mutex_unlock(&cpufreq_lock);
+			exynos4_target(policy, locking_frequency,
+				       CPUFREQ_RELATION_H);
+			mutex_lock(&cpufreq_lock);
+		}
+
+		break;
+	case PM_POST_SUSPEND:
+
+		if (saved_frequency) {
+			/*
+			 * While frequency_locked, only locking_frequency
+			 * is valid for target(). In order to use
+			 * saved_frequency while keeping frequency_locked,
+			 * we temporarly overwrite locking_frequency.
+			 */
+			temp = locking_frequency;
+			locking_frequency = saved_frequency;
+
+			mutex_unlock(&cpufreq_lock);
+			exynos4_target(policy, locking_frequency,
+				       CPUFREQ_RELATION_H);
+			mutex_lock(&cpufreq_lock);
+
+			locking_frequency = temp;
+		}
+
+		frequency_locked = false;
+		break;
+	}
+out:
+	mutex_unlock(&cpufreq_lock);
+
+	return NOTIFY_OK;
+}
+
+static struct notifier_block exynos4_cpufreq_nb = {
+	.notifier_call = exynos4_cpufreq_pm_notifier,
+};
+
 static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
 {
+	int ret;
+
 	policy->cur = policy->min = policy->max = exynos4_getspeed(policy->cpu);
 
 	cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
@@ -479,16 +575,35 @@ static int exynos4_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	 */
 	cpumask_setall(policy->cpus);
 
-	return cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
+	ret = cpufreq_frequency_table_cpuinfo(policy, exynos4_freq_table);
+	if (ret)
+		return ret;
+
+	cpufreq_frequency_table_get_attr(exynos4_freq_table, policy->cpu);
+
+	return 0;
+}
+
+static int exynos4_cpufreq_cpu_exit(struct cpufreq_policy *policy)
+{
+	cpufreq_frequency_table_put_attr(policy->cpu);
+	return 0;
 }
 
+static struct freq_attr *exynos4_cpufreq_attr[] = {
+	&cpufreq_freq_attr_scaling_available_freqs,
+	NULL,
+};
+
 static struct cpufreq_driver exynos4_driver = {
 	.flags		= CPUFREQ_STICKY,
 	.verify		= exynos4_verify_speed,
 	.target		= exynos4_target,
 	.get		= exynos4_getspeed,
 	.init		= exynos4_cpufreq_cpu_init,
+	.exit		= exynos4_cpufreq_cpu_exit,
 	.name		= "exynos4_cpufreq",
+	.attr		= exynos4_cpufreq_attr,
 #ifdef CONFIG_PM
 	.suspend	= exynos4_cpufreq_suspend,
 	.resume		= exynos4_cpufreq_resume,
@@ -501,6 +616,8 @@ static int __init exynos4_cpufreq_init(void)
 	if (IS_ERR(cpu_clk))
 		return PTR_ERR(cpu_clk);
 
+	locking_frequency = exynos4_getspeed(0);
+
 	moutcore = clk_get(NULL, "moutcore");
 	if (IS_ERR(moutcore))
 		goto out;
@@ -540,6 +657,8 @@ static int __init exynos4_cpufreq_init(void)
 		printk(KERN_DEBUG "%s: memtype= 0x%x\n", __func__, memtype);
 	}
 
+	register_pm_notifier(&exynos4_cpufreq_nb);
+
 	return cpufreq_register_driver(&exynos4_driver);
 
 out: