amd64_edac: enhance address to DRAM bank mapping

Add cs mode to cs size mapping tables for DDR2 and DDR3 and F10
and all K8 flavors and remove klugdy table of pseudo values. Add a
low_ops->dbam_to_cs member which is family-specific and replaces
low_ops->dbam_map_to_pages since the pages calculation is a one liner
now.

Further cleanups, while at it:

- shorten family name defines
- align amd64_family_types struct members

Signed-off-by: Borislav Petkov <borislav.petkov@amd.com>

1 files changed, 94 insertions, 100 deletions

diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index ed9b07a..7e67054 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -19,26 +19,48 @@ static struct mem_ctl_info *mci_lookup[EDAC_MAX_NUMNODES];
 static struct amd64_pvt *pvt_lookup[EDAC_MAX_NUMNODES];
 
 /*
- * See F2x80 for K8 and F2x[1,0]80 for Fam10 and later. The table below is only
- * for DDR2 DRAM mapping.
+ * Address to DRAM bank mapping: see F2x80 for K8 and F2x[1,0]80 for Fam10 and
+ * later.
  */
-u32 revf_quad_ddr2_shift[] = {
-	0,	/* 0000b NULL DIMM (128mb) */
-	28,	/* 0001b 256mb */
-	29,	/* 0010b 512mb */
-	29,	/* 0011b 512mb */
-	29,	/* 0100b 512mb */
-	30,	/* 0101b 1gb */
-	30,	/* 0110b 1gb */
-	31,	/* 0111b 2gb */
-	31,	/* 1000b 2gb */
-	32,	/* 1001b 4gb */
-	32,	/* 1010b 4gb */
-	33,	/* 1011b 8gb */
-	0,	/* 1100b future */
-	0,	/* 1101b future */
-	0,	/* 1110b future */
-	0	/* 1111b future */
+static int ddr2_dbam_revCG[] = {
+			   [0]		= 32,
+			   [1]		= 64,
+			   [2]		= 128,
+			   [3]		= 256,
+			   [4]		= 512,
+			   [5]		= 1024,
+			   [6]		= 2048,
+};
+
+static int ddr2_dbam_revD[] = {
+			   [0]		= 32,
+			   [1]		= 64,
+			   [2 ... 3]	= 128,
+			   [4]		= 256,
+			   [5]		= 512,
+			   [6]		= 256,
+			   [7]		= 512,
+			   [8 ... 9]	= 1024,
+			   [10]		= 2048,
+};
+
+static int ddr2_dbam[] = { [0]		= 128,
+			   [1]		= 256,
+			   [2 ... 4]	= 512,
+			   [5 ... 6]	= 1024,
+			   [7 ... 8]	= 2048,
+			   [9 ... 10]	= 4096,
+			   [11]		= 8192,
+};
+
+static int ddr3_dbam[] = { [0]		= -1,
+			   [1]		= 256,
+			   [2]		= 512,
+			   [3 ... 4]	= -1,
+			   [5 ... 6]	= 1024,
+			   [7 ... 8]	= 2048,
+			   [9 ... 10]	= 4096,
+			   [11]	= 8192,
 };
 
 /*
@@ -187,7 +209,7 @@ static int amd64_get_scrub_rate(struct mem_ctl_info *mci, u32 *bw)
 /* Map from a CSROW entry to the mask entry that operates on it */
 static inline u32 amd64_map_to_dcs_mask(struct amd64_pvt *pvt, int csrow)
 {
-	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F)
+	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F)
 		return csrow;
 	else
 		return csrow >> 1;
@@ -435,7 +457,7 @@ int amd64_get_dram_hole_info(struct mem_ctl_info *mci, u64 *hole_base,
 	u64 base;
 
 	/* only revE and later have the DRAM Hole Address Register */
-	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_E) {
+	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_E) {
 		debugf1("  revision %d for node %d does not support DHAR\n",
 			pvt->ext_model, pvt->mc_node_id);
 		return 1;
@@ -795,7 +817,7 @@ static void amd64_cpu_display_info(struct amd64_pvt *pvt)
 		edac_printk(KERN_DEBUG, EDAC_MC, "F10h CPU detected\n");
 	else if (boot_cpu_data.x86 == 0xf)
 		edac_printk(KERN_DEBUG, EDAC_MC, "%s detected\n",
-			(pvt->ext_model >= OPTERON_CPU_REV_F) ?
+			(pvt->ext_model >= K8_REV_F) ?
 			"Rev F or later" : "Rev E or earlier");
 	else
 		/* we'll hardly ever ever get here */
@@ -811,7 +833,7 @@ static enum edac_type amd64_determine_edac_cap(struct amd64_pvt *pvt)
 	int bit;
 	enum dev_type edac_cap = EDAC_FLAG_NONE;
 
-	bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= OPTERON_CPU_REV_F)
+	bit = (boot_cpu_data.x86 > 0xf || pvt->ext_model >= K8_REV_F)
 		? 19
 		: 17;
 
@@ -936,7 +958,7 @@ static void amd64_read_dbam_reg(struct amd64_pvt *pvt)
 static void amd64_set_dct_base_and_mask(struct amd64_pvt *pvt)
 {
 
-	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < OPTERON_CPU_REV_F) {
+	if (boot_cpu_data.x86 == 0xf && pvt->ext_model < K8_REV_F) {
 		pvt->dcsb_base		= REV_E_DCSB_BASE_BITS;
 		pvt->dcsm_mask		= REV_E_DCSM_MASK_BITS;
 		pvt->dcs_mask_notused	= REV_E_DCS_NOTUSED_BITS;
@@ -1009,7 +1031,7 @@ static enum mem_type amd64_determine_memory_type(struct amd64_pvt *pvt)
 {
 	enum mem_type type;
 
-	if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= OPTERON_CPU_REV_F) {
+	if (boot_cpu_data.x86 >= 0x10 || pvt->ext_model >= K8_REV_F) {
 		/* Rev F and later */
 		type = (pvt->dclr0 & BIT(16)) ? MEM_DDR2 : MEM_RDDR2;
 	} else {
@@ -1042,7 +1064,7 @@ static int k8_early_channel_count(struct amd64_pvt *pvt)
 	if (err)
 		return err;
 
-	if ((boot_cpu_data.x86_model >> 4) >= OPTERON_CPU_REV_F) {
+	if ((boot_cpu_data.x86_model >> 4) >= K8_REV_F) {
 		/* RevF (NPT) and later */
 		flag = pvt->dclr0 & F10_WIDTH_128;
 	} else {
@@ -1158,36 +1180,18 @@ static void k8_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 	}
 }
 
-/*
- * determrine the number of PAGES in for this DIMM's size based on its DRAM
- * Address Mapping.
- *
- * First step is to calc the number of bits to shift a value of 1 left to
- * indicate show many pages. Start with the DBAM value as the starting bits,
- * then proceed to adjust those shift bits, based on CPU rev and the table.
- * See BKDG on the DBAM
- */
-static int k8_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
+static int k8_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode)
 {
-	int nr_pages;
+	int *dbam_map;
 
-	if (pvt->ext_model >= OPTERON_CPU_REV_F) {
-		nr_pages = 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT);
-	} else {
-		/*
-		 * RevE and less section; this line is tricky. It collapses the
-		 * table used by RevD and later to one that matches revisions CG
-		 * and earlier.
-		 */
-		dram_map -= (pvt->ext_model >= OPTERON_CPU_REV_D) ?
-				(dram_map > 8 ? 4 : (dram_map > 5 ?
-				3 : (dram_map > 2 ? 1 : 0))) : 0;
-
-		/* 25 shift is 32MiB minimum DIMM size in RevE and prior */
-		nr_pages = 1 << (dram_map + 25 - PAGE_SHIFT);
-	}
+	if (pvt->ext_model >= K8_REV_F)
+		dbam_map = ddr2_dbam;
+	else if (pvt->ext_model >= K8_REV_D)
+		dbam_map = ddr2_dbam_revD;
+	else
+		dbam_map = ddr2_dbam_revCG;
 
-	return nr_pages;
+	return dbam_map[cs_mode];
 }
 
 /*
@@ -1249,9 +1253,16 @@ err_reg:
 
 }
 
-static int f10_dbam_map_to_pages(struct amd64_pvt *pvt, int dram_map)
+static int f10_dbam_to_chip_select(struct amd64_pvt *pvt, int cs_mode)
 {
-	return 1 << (revf_quad_ddr2_shift[dram_map] - PAGE_SHIFT);
+	int *dbam_map;
+
+	if (pvt->dchr0 & DDR3_MODE || pvt->dchr1 & DDR3_MODE)
+		dbam_map = ddr3_dbam;
+	else
+		dbam_map = ddr2_dbam;
+
+	return dbam_map[cs_mode];
 }
 
 /* Enable extended configuration access via 0xCF8 feature */
@@ -1706,23 +1717,6 @@ static void f10_map_sysaddr_to_csrow(struct mem_ctl_info *mci,
 }
 
 /*
- * Input (@index) is the DBAM DIMM value (1 of 4) used as an index into a shift
- * table (revf_quad_ddr2_shift) which starts at 128MB DIMM size. Index of 0
- * indicates an empty DIMM slot, as reported by Hardware on empty slots.
- *
- * Normalize to 128MB by subracting 27 bit shift.
- */
-static int map_dbam_to_csrow_size(int index)
-{
-	int mega_bytes = 0;
-
-	if (index > 0 && index <= DBAM_MAX_VALUE)
-		mega_bytes = ((128 << (revf_quad_ddr2_shift[index]-27)));
-
-	return mega_bytes;
-}
-
-/*
  * debug routine to display the memory sizes of all logical DIMMs and its
  * CSROWs as well
  */
@@ -1734,7 +1728,7 @@ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt)
 
 	if (boot_cpu_data.x86 == 0xf) {
 		/* K8 families < revF not supported yet */
-	       if (pvt->ext_model < OPTERON_CPU_REV_F)
+	       if (pvt->ext_model < K8_REV_F)
 			return;
 	       else
 		       WARN_ON(ctrl != 0);
@@ -1753,11 +1747,11 @@ static void amd64_debug_display_dimm_sizes(int ctrl, struct amd64_pvt *pvt)
 
 		size0 = 0;
 		if (dcsb[dimm*2] & K8_DCSB_CS_ENABLE)
-			size0 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam));
+			size0 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam));
 
 		size1 = 0;
 		if (dcsb[dimm*2 + 1] & K8_DCSB_CS_ENABLE)
-			size1 = map_dbam_to_csrow_size(DBAM_DIMM(dimm, dbam));
+			size1 = pvt->ops->dbam_to_cs(pvt, DBAM_DIMM(dimm, dbam));
 
 		edac_printk(KERN_DEBUG, EDAC_MC, " %d: %5dMB %d: %5dMB\n",
 			    dimm * 2, size0, dimm * 2 + 1, size1);
@@ -1780,8 +1774,8 @@ static int f10_probe_valid_hardware(struct amd64_pvt *pvt)
 	 * If we are on a DDR3 machine, we don't know yet if
 	 * we support that properly at this time
 	 */
-	if ((pvt->dchr0 & F10_DCHR_Ddr3Mode) ||
-	    (pvt->dchr1 & F10_DCHR_Ddr3Mode)) {
+	if ((pvt->dchr0 & DDR3_MODE) ||
+	    (pvt->dchr1 & DDR3_MODE)) {
 
 		amd64_printk(KERN_WARNING,
 			"%s() This machine is running with DDR3 memory. "
@@ -1817,11 +1811,11 @@ static struct amd64_family_type amd64_family_types[] = {
 		.addr_f1_ctl = PCI_DEVICE_ID_AMD_K8_NB_ADDRMAP,
 		.misc_f3_ctl = PCI_DEVICE_ID_AMD_K8_NB_MISC,
 		.ops = {
-			.early_channel_count = k8_early_channel_count,
-			.get_error_address = k8_get_error_address,
-			.read_dram_base_limit = k8_read_dram_base_limit,
-			.map_sysaddr_to_csrow = k8_map_sysaddr_to_csrow,
-			.dbam_map_to_pages = k8_dbam_map_to_pages,
+			.early_channel_count	= k8_early_channel_count,
+			.get_error_address	= k8_get_error_address,
+			.read_dram_base_limit	= k8_read_dram_base_limit,
+			.map_sysaddr_to_csrow	= k8_map_sysaddr_to_csrow,
+			.dbam_to_cs		= k8_dbam_to_chip_select,
 		}
 	},
 	[F10_CPUS] = {
@@ -1829,13 +1823,13 @@ static struct amd64_family_type amd64_family_types[] = {
 		.addr_f1_ctl = PCI_DEVICE_ID_AMD_10H_NB_MAP,
 		.misc_f3_ctl = PCI_DEVICE_ID_AMD_10H_NB_MISC,
 		.ops = {
-			.probe_valid_hardware = f10_probe_valid_hardware,
-			.early_channel_count = f10_early_channel_count,
-			.get_error_address = f10_get_error_address,
-			.read_dram_base_limit = f10_read_dram_base_limit,
-			.read_dram_ctl_register = f10_read_dram_ctl_register,
-			.map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
-			.dbam_map_to_pages = f10_dbam_map_to_pages,
+			.probe_valid_hardware	= f10_probe_valid_hardware,
+			.early_channel_count	= f10_early_channel_count,
+			.get_error_address	= f10_get_error_address,
+			.read_dram_base_limit	= f10_read_dram_base_limit,
+			.read_dram_ctl_register	= f10_read_dram_ctl_register,
+			.map_sysaddr_to_csrow	= f10_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f10_dbam_to_chip_select,
 		}
 	},
 	[F11_CPUS] = {
@@ -1843,13 +1837,13 @@ static struct amd64_family_type amd64_family_types[] = {
 		.addr_f1_ctl = PCI_DEVICE_ID_AMD_11H_NB_MAP,
 		.misc_f3_ctl = PCI_DEVICE_ID_AMD_11H_NB_MISC,
 		.ops = {
-			.probe_valid_hardware = f10_probe_valid_hardware,
-			.early_channel_count = f10_early_channel_count,
-			.get_error_address = f10_get_error_address,
-			.read_dram_base_limit = f10_read_dram_base_limit,
-			.read_dram_ctl_register = f10_read_dram_ctl_register,
-			.map_sysaddr_to_csrow = f10_map_sysaddr_to_csrow,
-			.dbam_map_to_pages = f10_dbam_map_to_pages,
+			.probe_valid_hardware	= f10_probe_valid_hardware,
+			.early_channel_count	= f10_early_channel_count,
+			.get_error_address	= f10_get_error_address,
+			.read_dram_base_limit	= f10_read_dram_base_limit,
+			.read_dram_ctl_register	= f10_read_dram_ctl_register,
+			.map_sysaddr_to_csrow	= f10_map_sysaddr_to_csrow,
+			.dbam_to_cs		= f10_dbam_to_chip_select,
 		}
 	},
 };
@@ -2425,7 +2419,7 @@ static void amd64_read_mc_registers(struct amd64_pvt *pvt)
  */
 static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
 {
-	u32 dram_map, nr_pages;
+	u32 cs_mode, nr_pages;
 
 	/*
 	 * The math on this doesn't look right on the surface because x/2*4 can
@@ -2434,9 +2428,9 @@ static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
 	 * number of bits to shift the DBAM register to extract the proper CSROW
 	 * field.
 	 */
-	dram_map = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF;
+	cs_mode = (pvt->dbam0 >> ((csrow_nr / 2) * 4)) & 0xF;
 
-	nr_pages = pvt->ops->dbam_map_to_pages(pvt, dram_map);
+	nr_pages = pvt->ops->dbam_to_cs(pvt, cs_mode) << (20 - PAGE_SHIFT);
 
 	/*
 	 * If dual channel then double the memory size of single channel.
@@ -2444,7 +2438,7 @@ static u32 amd64_csrow_nr_pages(int csrow_nr, struct amd64_pvt *pvt)
 	 */
 	nr_pages <<= (pvt->channel_count - 1);
 
-	debugf0("  (csrow=%d) DBAM map index= %d\n", csrow_nr, dram_map);
+	debugf0("  (csrow=%d) DBAM map index= %d\n", csrow_nr, cs_mode);
 	debugf0("    nr_pages= %u  channel-count = %d\n",
 		nr_pages, pvt->channel_count);