samsung update 1

1 files changed, 35 insertions, 13 deletions

diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 0979d88..4d3d736 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -24,6 +24,7 @@
  *	Eric Anholt <eric@anholt.net>
  */
 
+#include <linux/dmi.h>
 #include <linux/i2c.h>
 #include <linux/slab.h>
 #include "drmP.h"
@@ -69,7 +70,7 @@ static void intel_crt_dpms(struct drm_encoder *encoder, int mode)
 	temp &= ~(ADPA_HSYNC_CNTL_DISABLE | ADPA_VSYNC_CNTL_DISABLE);
 	temp &= ~ADPA_DAC_ENABLE;
 
-	switch(mode) {
+	switch (mode) {
 	case DRM_MODE_DPMS_ON:
 		temp |= ADPA_DAC_ENABLE;
 		break;
@@ -152,17 +153,13 @@ static void intel_crt_mode_set(struct drm_encoder *encoder,
 	if (adjusted_mode->flags & DRM_MODE_FLAG_PVSYNC)
 		adpa |= ADPA_VSYNC_ACTIVE_HIGH;
 
-	if (intel_crtc->pipe == 0) {
-		if (HAS_PCH_CPT(dev))
-			adpa |= PORT_TRANS_A_SEL_CPT;
-		else
-			adpa |= ADPA_PIPE_A_SELECT;
-	} else {
-		if (HAS_PCH_CPT(dev))
-			adpa |= PORT_TRANS_B_SEL_CPT;
-		else
-			adpa |= ADPA_PIPE_B_SELECT;
-	}
+	/* For CPT allow 3 pipe config, for others just use A or B */
+	if (HAS_PCH_CPT(dev))
+		adpa |= PORT_TRANS_SEL_CPT(intel_crtc->pipe);
+	else if (intel_crtc->pipe == 0)
+		adpa |= ADPA_PIPE_A_SELECT;
+	else
+		adpa |= ADPA_PIPE_B_SELECT;
 
 	if (!HAS_PCH_SPLIT(dev))
 		I915_WRITE(BCLRPAT(intel_crtc->pipe), 0);
@@ -544,6 +541,24 @@ static const struct drm_encoder_funcs intel_crt_enc_funcs = {
 	.destroy = intel_encoder_destroy,
 };
 
+static int __init intel_no_crt_dmi_callback(const struct dmi_system_id *id)
+{
+	DRM_DEBUG_KMS("Skipping CRT initialization for %s\n", id->ident);
+	return 1;
+}
+
+static const struct dmi_system_id intel_no_crt[] = {
+	{
+		.callback = intel_no_crt_dmi_callback,
+		.ident = "ACER ZGB",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "ACER"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "ZGB"),
+		},
+	},
+	{ }
+};
+
 void intel_crt_init(struct drm_device *dev)
 {
 	struct drm_connector *connector;
@@ -551,6 +566,10 @@ void intel_crt_init(struct drm_device *dev)
 	struct intel_connector *intel_connector;
 	struct drm_i915_private *dev_priv = dev->dev_private;
 
+	/* Skip machines without VGA that falsely report hotplug events */
+	if (dmi_check_system(intel_no_crt))
+		return;
+
 	crt = kzalloc(sizeof(struct intel_crt), GFP_KERNEL);
 	if (!crt)
 		return;
@@ -575,7 +594,10 @@ void intel_crt_init(struct drm_device *dev)
 				1 << INTEL_ANALOG_CLONE_BIT |
 				1 << INTEL_SDVO_LVDS_CLONE_BIT);
 	crt->base.crtc_mask = (1 << 0) | (1 << 1);
-	connector->interlace_allowed = 1;
+	if (IS_GEN2(dev))
+		connector->interlace_allowed = 0;
+	else
+		connector->interlace_allowed = 1;
 	connector->doublescan_allowed = 0;
 
 	drm_encoder_helper_add(&crt->base.base, &intel_crt_helper_funcs);