Merge linux-3.0.31 from korg into jellybean

Conflicts:
	arch/arm/mm/proc-v7.S
	drivers/base/core.c
	drivers/gpu/drm/i915/i915_gem_execbuffer.c
	drivers/gpu/drm/i915/intel_display.c
	drivers/gpu/drm/i915/intel_lvds.c
	drivers/gpu/drm/radeon/evergreen.c
	drivers/gpu/drm/radeon/r100.c
	drivers/gpu/drm/radeon/radeon_connectors.c
	drivers/gpu/drm/radeon/rs600.c
	drivers/usb/core/hub.c
	drivers/usb/host/xhci-pci.c
	drivers/usb/host/xhci.c
	drivers/usb/serial/qcserial.c
	fs/proc/base.c

Change-Id: Ia98b35db3f8c0bfd95817867d3acb85be8e5e772

10 files changed, 40 insertions, 18 deletions

diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index eca3bcc..f2ce8c3 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -103,8 +103,14 @@ static int sclhi(struct i2c_algo_bit_data *adap)
 		 * chips may hold it low ("clock stretching") while they
 		 * are processing data internally.
 		 */
-		if (time_after(jiffies, start + adap->timeout))
+		if (time_after(jiffies, start + adap->timeout)) {
+			/* Test one last time, as we may have been preempted
+			 * between last check and timeout test.
+			 */
+			if (getscl(adap))
+				break;
 			return -ETIMEDOUT;
+		}
 		cond_resched();
 	}
 #ifdef DEBUG
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index dd36417..cd7ac5c 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -140,7 +140,7 @@ static unsigned short ali1535_smba;
    defined to make the transition easier. */
 static int __devinit ali1535_setup(struct pci_dev *dev)
 {
-	int retval = -ENODEV;
+	int retval;
 	unsigned char temp;
 
 	/* Check the following things:
@@ -155,6 +155,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
 	if (ali1535_smba == 0) {
 		dev_warn(&dev->dev,
 			"ALI1535_smb region uninitialized - upgrade BIOS?\n");
+		retval = -ENODEV;
 		goto exit;
 	}
 
@@ -167,6 +168,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
 			    ali1535_driver.name)) {
 		dev_err(&dev->dev, "ALI1535_smb region 0x%x already in use!\n",
 			ali1535_smba);
+		retval = -EBUSY;
 		goto exit;
 	}
 
@@ -174,6 +176,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
 	pci_read_config_byte(dev, SMBCFG, &temp);
 	if ((temp & ALI1535_SMBIO_EN) == 0) {
 		dev_err(&dev->dev, "SMB device not enabled - upgrade BIOS?\n");
+		retval = -ENODEV;
 		goto exit_free;
 	}
 
@@ -181,6 +184,7 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
 	pci_read_config_byte(dev, SMBHSTCFG, &temp);
 	if ((temp & 1) == 0) {
 		dev_err(&dev->dev, "SMBus controller not enabled - upgrade BIOS?\n");
+		retval = -ENODEV;
 		goto exit_free;
 	}
 
@@ -198,12 +202,11 @@ static int __devinit ali1535_setup(struct pci_dev *dev)
 	dev_dbg(&dev->dev, "SMBREV = 0x%X\n", temp);
 	dev_dbg(&dev->dev, "ALI1535_smba = 0x%X\n", ali1535_smba);
 
-	retval = 0;
-exit:
-	return retval;
+	return 0;
 
 exit_free:
 	release_region(ali1535_smba, ALI1535_SMB_IOSIZE);
+exit:
 	return retval;
 }
 
diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 8abfa4a..656b028 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -242,7 +242,7 @@ static void pch_i2c_init(struct i2c_algo_pch_data *adap)
 	if (pch_clk > PCH_MAX_CLK)
 		pch_clk = 62500;
 
-	pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / pch_i2c_speed * 8;
+	pch_i2cbc = (pch_clk + (pch_i2c_speed * 4)) / (pch_i2c_speed * 8);
 	/* Set transfer speed in I2CBC */
 	iowrite32(pch_i2cbc, p + PCH_I2CBC);
 
diff --git a/drivers/i2c/busses/i2c-mxs.c b/drivers/i2c/busses/i2c-mxs.c
index 7e78f7c..3d471d5 100644
--- a/drivers/i2c/busses/i2c-mxs.c
+++ b/drivers/i2c/busses/i2c-mxs.c
@@ -72,6 +72,7 @@
 
 #define MXS_I2C_QUEUESTAT	(0x70)
 #define MXS_I2C_QUEUESTAT_RD_QUEUE_EMPTY        0x00002000
+#define MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK	0x0000001F
 
 #define MXS_I2C_QUEUECMD	(0x80)
 
@@ -219,14 +220,14 @@ static int mxs_i2c_xfer_msg(struct i2c_adapter *adap, struct i2c_msg *msg,
 	int ret;
 	int flags;
 
-	init_completion(&i2c->cmd_complete);
-
 	dev_dbg(i2c->dev, "addr: 0x%04x, len: %d, flags: 0x%x, stop: %d\n",
 		msg->addr, msg->len, msg->flags, stop);
 
 	if (msg->len == 0)
 		return -EINVAL;
 
+	init_completion(&i2c->cmd_complete);
+
 	flags = stop ? MXS_I2C_CTRL0_POST_SEND_STOP : 0;
 
 	if (msg->flags & I2C_M_RD)
@@ -286,6 +287,7 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
 {
 	struct mxs_i2c_dev *i2c = dev_id;
 	u32 stat = readl(i2c->regs + MXS_I2C_CTRL1) & MXS_I2C_IRQ_MASK;
+	bool is_last_cmd;
 
 	if (!stat)
 		return IRQ_NONE;
@@ -300,9 +302,14 @@ static irqreturn_t mxs_i2c_isr(int this_irq, void *dev_id)
 	else
 		i2c->cmd_err = 0;
 
-	complete(&i2c->cmd_complete);
+	is_last_cmd = (readl(i2c->regs + MXS_I2C_QUEUESTAT) &
+		MXS_I2C_QUEUESTAT_WRITE_QUEUE_CNT_MASK) == 0;
+
+	if (is_last_cmd || i2c->cmd_err)
+		complete(&i2c->cmd_complete);
 
 	writel(stat, i2c->regs + MXS_I2C_CTRL1_CLR);
+
 	return IRQ_HANDLED;
 }
 
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index ff1e127..4853b52 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -356,7 +356,7 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar,
 	error = acpi_check_region(smbus->base, smbus->size,
 				  nforce2_driver.name);
 	if (error)
-		return -1;
+		return error;
 
 	if (!request_region(smbus->base, smbus->size, nforce2_driver.name)) {
 		dev_err(&smbus->adapter.dev, "Error requesting region %02x .. %02X for %s\n",
diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c
index 58a58c7..137e1a3 100644
--- a/drivers/i2c/busses/i2c-omap.c
+++ b/drivers/i2c/busses/i2c-omap.c
@@ -235,7 +235,7 @@ const static u8 omap4_reg_map[] = {
 	[OMAP_I2C_BUF_REG] = 0x94,
 	[OMAP_I2C_CNT_REG] = 0x98,
 	[OMAP_I2C_DATA_REG] = 0x9c,
-	[OMAP_I2C_SYSC_REG] = 0x20,
+	[OMAP_I2C_SYSC_REG] = 0x10,
 	[OMAP_I2C_CON_REG] = 0xa4,
 	[OMAP_I2C_OA_REG] = 0xa8,
 	[OMAP_I2C_SA_REG] = 0xac,
diff --git a/drivers/i2c/busses/i2c-pnx.c b/drivers/i2c/busses/i2c-pnx.c
index 04be9f8..eb8ad53 100644
--- a/drivers/i2c/busses/i2c-pnx.c
+++ b/drivers/i2c/busses/i2c-pnx.c
@@ -546,8 +546,7 @@ static int i2c_pnx_controller_suspend(struct platform_device *pdev,
 {
 	struct i2c_pnx_algo_data *alg_data = platform_get_drvdata(pdev);
 
-	/* FIXME: shouldn't this be clk_disable? */
-	clk_enable(alg_data->clk);
+	clk_disable(alg_data->clk);
 
 	return 0;
 }
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index 4375866..6d60284 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -147,7 +147,7 @@ static int __devinit sis5595_setup(struct pci_dev *SIS5595_dev)
 	u16 a;
 	u8 val;
 	int *i;
-	int retval = -ENODEV;
+	int retval;
 
 	/* Look for imposters */
 	for (i = blacklist; *i != 0; i++) {
@@ -223,7 +223,7 @@ static int __devinit sis5595_setup(struct pci_dev *SIS5595_dev)
 
 error:
 	release_region(sis5595_base + SMB_INDEX, 2);
-	return retval;
+	return -ENODEV;
 }
 
 static int sis5595_transaction(struct i2c_adapter *adap)
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index e6f539e..b617fd0 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -393,7 +393,7 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev)
 {
 	unsigned char b;
 	struct pci_dev *dummy = NULL;
-	int retval = -ENODEV, i;
+	int retval, i;
 
 	/* check for supported SiS devices */
 	for (i=0; supported[i] > 0 ; i++) {
@@ -418,18 +418,21 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev)
 	*/
 	if (pci_read_config_byte(sis630_dev, SIS630_BIOS_CTL_REG,&b)) {
 		dev_err(&sis630_dev->dev, "Error: Can't read bios ctl reg\n");
+		retval = -ENODEV;
 		goto exit;
 	}
 	/* if ACPI already enabled , do nothing */
 	if (!(b & 0x80) &&
 	    pci_write_config_byte(sis630_dev, SIS630_BIOS_CTL_REG, b | 0x80)) {
 		dev_err(&sis630_dev->dev, "Error: Can't enable ACPI\n");
+		retval = -ENODEV;
 		goto exit;
 	}
 
 	/* Determine the ACPI base address */
 	if (pci_read_config_word(sis630_dev,SIS630_ACPI_BASE_REG,&acpi_base)) {
 		dev_err(&sis630_dev->dev, "Error: Can't determine ACPI base address\n");
+		retval = -ENODEV;
 		goto exit;
 	}
 
@@ -445,6 +448,7 @@ static int __devinit sis630_setup(struct pci_dev *sis630_dev)
 			    sis630_driver.name)) {
 		dev_err(&sis630_dev->dev, "SMBus registers 0x%04x-0x%04x already "
 			"in use!\n", acpi_base + SMB_STS, acpi_base + SMB_SAA);
+		retval = -EBUSY;
 		goto exit;
 	}
 
diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c
index 0b012f1..58261d4 100644
--- a/drivers/i2c/busses/i2c-viapro.c
+++ b/drivers/i2c/busses/i2c-viapro.c
@@ -324,7 +324,7 @@ static int __devinit vt596_probe(struct pci_dev *pdev,
 				 const struct pci_device_id *id)
 {
 	unsigned char temp;
-	int error = -ENODEV;
+	int error;
 
 	/* Determine the address of the SMBus areas */
 	if (force_addr) {
@@ -390,6 +390,7 @@ found:
 			dev_err(&pdev->dev, "SMBUS: Error: Host SMBus "
 				"controller not enabled! - upgrade BIOS or "
 				"use force=1\n");
+			error = -ENODEV;
 			goto release_region;
 		}
 	}
@@ -422,9 +423,11 @@ found:
 		 "SMBus Via Pro adapter at %04x", vt596_smba);
 
 	vt596_pdev = pci_dev_get(pdev);
-	if (i2c_add_adapter(&vt596_adapter)) {
+	error = i2c_add_adapter(&vt596_adapter);
+	if (error) {
 		pci_dev_put(vt596_pdev);
 		vt596_pdev = NULL;
+		goto release_region;
 	}
 
 	/* Always return failure here.  This is to allow other drivers to bind