Linux-2.6.12-rc2

Initial git repository build. I'm not bothering with the full history,
even though we have it. We can create a separate "historical" git
archive of that later if we want to, and in the meantime it's about
3.2GB when imported into git - space that would just make the early
git days unnecessarily complicated, when we don't have a lot of good
infrastructure for it.

Let it rip!

1 files changed, 94 insertions, 0 deletions

diff --git a/drivers/media/video/ibmmpeg2.h b/drivers/media/video/ibmmpeg2.h
new file mode 100644
index 0000000..68e1038
--- /dev/null
+++ b/drivers/media/video/ibmmpeg2.h
@@ -0,0 +1,94 @@
+/* ibmmpeg2.h - IBM MPEGCD21 definitions */
+
+#ifndef __IBM_MPEG2__
+#define __IBM_MPEG2__
+
+/* Define all MPEG Decoder registers */
+/* Chip Control and Status */
+#define IBM_MP2_CHIP_CONTROL	0x200*2
+#define IBM_MP2_CHIP_MODE	0x201*2
+/* Timer Control and Status */
+#define IBM_MP2_SYNC_STC2	0x202*2
+#define IBM_MP2_SYNC_STC1	0x203*2
+#define IBM_MP2_SYNC_STC0	0x204*2
+#define IBM_MP2_SYNC_PTS2	0x205*2
+#define IBM_MP2_SYNC_PTS1	0x206*2
+#define IBM_MP2_SYNC_PTS0	0x207*2
+/* Video FIFO Control */
+#define IBM_MP2_FIFO		0x208*2
+#define IBM_MP2_FIFOW		0x100*2
+#define IBM_MP2_FIFO_STAT	0x209*2
+#define IBM_MP2_RB_THRESHOLD	0x22b*2
+/* Command buffer */
+#define IBM_MP2_COMMAND		0x20a*2
+#define IBM_MP2_CMD_DATA	0x20b*2
+#define IBM_MP2_CMD_STAT	0x20c*2
+#define IBM_MP2_CMD_ADDR	0x20d*2
+/* Internal Processor Control and Status */
+#define IBM_MP2_PROC_IADDR	0x20e*2
+#define IBM_MP2_PROC_IDATA	0x20f*2
+#define IBM_MP2_WR_PROT		0x235*2
+/* DRAM Access */
+#define IBM_MP2_DRAM_ADDR	0x210*2
+#define IBM_MP2_DRAM_DATA	0x212*2
+#define IBM_MP2_DRAM_CMD_STAT	0x213*2
+#define IBM_MP2_BLOCK_SIZE	0x23b*2
+#define IBM_MP2_SRC_ADDR	0x23c*2
+/* Onscreen Display */
+#define IBM_MP2_OSD_ADDR	0x214*2
+#define IBM_MP2_OSD_DATA	0x215*2
+#define IBM_MP2_OSD_MODE	0x217*2
+#define IBM_MP2_OSD_LINK_ADDR	0x229*2
+#define IBM_MP2_OSD_SIZE	0x22a*2
+/* Interrupt Control */
+#define IBM_MP2_HOST_INT	0x218*2
+#define IBM_MP2_MASK0		0x219*2
+#define IBM_MP2_HOST_INT1	0x23e*2
+#define IBM_MP2_MASK1		0x23f*2
+/* Audio Control */
+#define IBM_MP2_AUD_IADDR	0x21a*2
+#define IBM_MP2_AUD_IDATA	0x21b*2
+#define IBM_MP2_AUD_FIFO	0x21c*2
+#define IBM_MP2_AUD_FIFOW	0x101*2
+#define IBM_MP2_AUD_CTL		0x21d*2
+#define IBM_MP2_BEEP_CTL	0x21e*2
+#define IBM_MP2_FRNT_ATTEN	0x22d*2
+/* Display Control */
+#define IBM_MP2_DISP_MODE	0x220*2
+#define IBM_MP2_DISP_DLY	0x221*2
+#define IBM_MP2_VBI_CTL		0x222*2
+#define IBM_MP2_DISP_LBOR	0x223*2
+#define IBM_MP2_DISP_TBOR	0x224*2
+/* Polarity Control */
+#define IBM_MP2_INFC_CTL	0x22c*2
+
+/* control commands */
+#define IBM_MP2_PLAY		0
+#define IBM_MP2_PAUSE		1
+#define IBM_MP2_SINGLE_FRAME	2
+#define IBM_MP2_FAST_FORWARD	3
+#define IBM_MP2_SLOW_MOTION	4
+#define IBM_MP2_IMED_NORM_PLAY	5
+#define IBM_MP2_RESET_WINDOW	6
+#define IBM_MP2_FREEZE_FRAME	7
+#define IBM_MP2_RESET_VID_RATE	8
+#define IBM_MP2_CONFIG_DECODER	9
+#define IBM_MP2_CHANNEL_SWITCH	10
+#define IBM_MP2_RESET_AUD_RATE	11
+#define IBM_MP2_PRE_OP_CHN_SW	12
+#define IBM_MP2_SET_STILL_MODE	14
+
+/* Define Xilinx FPGA Internal Registers */
+
+/* general control register 0 */
+#define XILINX_CTL0		0x600
+/* genlock delay resister 1 */
+#define XILINX_GLDELAY		0x602
+/* send 16 bits to CS3310 port */
+#define XILINX_CS3310		0x604
+/* send 16 bits to CS3310 and complete */
+#define XILINX_CS3310_CMPLT	0x60c
+/* pulse width modulator control */
+#define XILINX_PWM		0x606
+
+#endif