diff options
author | Laurent Pinchart <laurent.pinchart@ideasonboard.com> | 2011-02-12 18:05:06 -0300 |
---|---|---|
committer | Mauro Carvalho Chehab <mchehab@redhat.com> | 2011-03-22 04:53:50 -0300 |
commit | 121e9f1c4c49c76aac2425e3a9baef70f73f50a4 (patch) | |
tree | ac466ee72518e57959c94b642642a45f5dc6f77e /drivers/media/video | |
parent | ad614acb7eca429891313f57bafbe5b3924a5aae (diff) | |
download | kernel_samsung_smdk4412-121e9f1c4c49c76aac2425e3a9baef70f73f50a4.zip kernel_samsung_smdk4412-121e9f1c4c49c76aac2425e3a9baef70f73f50a4.tar.gz kernel_samsung_smdk4412-121e9f1c4c49c76aac2425e3a9baef70f73f50a4.tar.bz2 |
[media] omap3isp: CCP2/CSI2 receivers
The OMAP3 ISP CCP2 and CSI2 receivers provide an interface to connect
serial MIPI sensors to the device.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Sakari Ailus <sakari.ailus@iki.fi>
Signed-off-by: David Cohen <dacohen@gmail.com>
Signed-off-by: Stanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: Vimarsh Zutshi <vimarsh.zutshi@gmail.com>
Signed-off-by: Tuukka Toivonen <tuukkat76@gmail.com>
Signed-off-by: Sergio Aguirre <saaguirre@ti.com>
Signed-off-by: Antti Koskipaa <akoskipa@gmail.com>
Signed-off-by: Ivan T. Ivanov <iivanov@mm-sol.com>
Signed-off-by: RaniSuneela <r-m@ti.com>
Signed-off-by: Atanas Filipov <afilipov@mm-sol.com>
Signed-off-by: Gjorgji Rosikopulos <grosikopulos@mm-sol.com>
Signed-off-by: Hiroshi DOYU <Hiroshi.DOYU@nokia.com>
Signed-off-by: Nayden Kanchev <nkanchev@mm-sol.com>
Signed-off-by: Phil Carmody <ext-phil.2.carmody@nokia.com>
Signed-off-by: Artem Bityutskiy <Artem.Bityutskiy@nokia.com>
Signed-off-by: Dominic Curran <dcurran@ti.com>
Signed-off-by: Ilkka Myllyperkio <ilkka.myllyperkio@sofica.fi>
Signed-off-by: Pallavi Kulkarni <p-kulkarni@ti.com>
Signed-off-by: Vaibhav Hiremath <hvaibhav@ti.com>
Acked-by: Hans Verkuil <hverkuil@xs4all.nl>
Signed-off-by: Mauro Carvalho Chehab <mchehab@redhat.com>
Diffstat (limited to 'drivers/media/video')
-rw-r--r-- | drivers/media/video/omap3isp/ispccp2.c | 1173 | ||||
-rw-r--r-- | drivers/media/video/omap3isp/ispccp2.h | 98 | ||||
-rw-r--r-- | drivers/media/video/omap3isp/ispcsi2.c | 1317 | ||||
-rw-r--r-- | drivers/media/video/omap3isp/ispcsi2.h | 166 | ||||
-rw-r--r-- | drivers/media/video/omap3isp/ispcsiphy.c | 247 | ||||
-rw-r--r-- | drivers/media/video/omap3isp/ispcsiphy.h | 74 |
6 files changed, 3075 insertions, 0 deletions
diff --git a/drivers/media/video/omap3isp/ispccp2.c b/drivers/media/video/omap3isp/ispccp2.c new file mode 100644 index 0000000..0efef2e --- /dev/null +++ b/drivers/media/video/omap3isp/ispccp2.c @@ -0,0 +1,1173 @@ +/* + * ispccp2.c + * + * TI OMAP3 ISP - CCP2 module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2010 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/mm.h> +#include <linux/module.h> +#include <linux/mutex.h> +#include <linux/uaccess.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispccp2.h" + +/* Number of LCX channels */ +#define CCP2_LCx_CHANS_NUM 3 +/* Max/Min size for CCP2 video port */ +#define ISPCCP2_DAT_START_MIN 0 +#define ISPCCP2_DAT_START_MAX 4095 +#define ISPCCP2_DAT_SIZE_MIN 0 +#define ISPCCP2_DAT_SIZE_MAX 4095 +#define ISPCCP2_VPCLK_FRACDIV 65536 +#define ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP 0x12 +#define ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP 0x16 +/* Max/Min size for CCP2 memory channel */ +#define ISPCCP2_LCM_HSIZE_COUNT_MIN 16 +#define ISPCCP2_LCM_HSIZE_COUNT_MAX 8191 +#define ISPCCP2_LCM_HSIZE_SKIP_MIN 0 +#define ISPCCP2_LCM_HSIZE_SKIP_MAX 8191 +#define ISPCCP2_LCM_VSIZE_MIN 1 +#define ISPCCP2_LCM_VSIZE_MAX 8191 +#define ISPCCP2_LCM_HWORDS_MIN 1 +#define ISPCCP2_LCM_HWORDS_MAX 4095 +#define ISPCCP2_LCM_CTRL_BURST_SIZE_32X 5 +#define ISPCCP2_LCM_CTRL_READ_THROTTLE_FULL 0 +#define ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 2 +#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 2 +#define ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 3 +#define ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 3 +#define ISPCCP2_LCM_CTRL_DST_PORT_VP 0 +#define ISPCCP2_LCM_CTRL_DST_PORT_MEM 1 + +/* Set only the required bits */ +#define BIT_SET(var, shift, mask, val) \ + do { \ + var = ((var) & ~((mask) << (shift))) \ + | ((val) << (shift)); \ + } while (0) + +/* + * ccp2_print_status - Print current CCP2 module register values. + */ +#define CCP2_PRINT_REGISTER(isp, name)\ + dev_dbg(isp->dev, "###CCP2 " #name "=0x%08x\n", \ + isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_##name)) + +static void ccp2_print_status(struct isp_ccp2_device *ccp2) +{ + struct isp_device *isp = to_isp_device(ccp2); + + dev_dbg(isp->dev, "-------------CCP2 Register dump-------------\n"); + + CCP2_PRINT_REGISTER(isp, SYSCONFIG); + CCP2_PRINT_REGISTER(isp, SYSSTATUS); + CCP2_PRINT_REGISTER(isp, LC01_IRQENABLE); + CCP2_PRINT_REGISTER(isp, LC01_IRQSTATUS); + CCP2_PRINT_REGISTER(isp, LC23_IRQENABLE); + CCP2_PRINT_REGISTER(isp, LC23_IRQSTATUS); + CCP2_PRINT_REGISTER(isp, LCM_IRQENABLE); + CCP2_PRINT_REGISTER(isp, LCM_IRQSTATUS); + CCP2_PRINT_REGISTER(isp, CTRL); + CCP2_PRINT_REGISTER(isp, LCx_CTRL(0)); + CCP2_PRINT_REGISTER(isp, LCx_CODE(0)); + CCP2_PRINT_REGISTER(isp, LCx_STAT_START(0)); + CCP2_PRINT_REGISTER(isp, LCx_STAT_SIZE(0)); + CCP2_PRINT_REGISTER(isp, LCx_SOF_ADDR(0)); + CCP2_PRINT_REGISTER(isp, LCx_EOF_ADDR(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_START(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_SIZE(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_PING_ADDR(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_PONG_ADDR(0)); + CCP2_PRINT_REGISTER(isp, LCx_DAT_OFST(0)); + CCP2_PRINT_REGISTER(isp, LCM_CTRL); + CCP2_PRINT_REGISTER(isp, LCM_VSIZE); + CCP2_PRINT_REGISTER(isp, LCM_HSIZE); + CCP2_PRINT_REGISTER(isp, LCM_PREFETCH); + CCP2_PRINT_REGISTER(isp, LCM_SRC_ADDR); + CCP2_PRINT_REGISTER(isp, LCM_SRC_OFST); + CCP2_PRINT_REGISTER(isp, LCM_DST_ADDR); + CCP2_PRINT_REGISTER(isp, LCM_DST_OFST); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +/* + * ccp2_reset - Reset the CCP2 + * @ccp2: pointer to ISP CCP2 device + */ +static void ccp2_reset(struct isp_ccp2_device *ccp2) +{ + struct isp_device *isp = to_isp_device(ccp2); + int i = 0; + + /* Reset the CSI1/CCP2B and wait for reset to complete */ + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG, + ISPCCP2_SYSCONFIG_SOFT_RESET); + while (!(isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSSTATUS) & + ISPCCP2_SYSSTATUS_RESET_DONE)) { + udelay(10); + if (i++ > 10) { /* try read 10 times */ + dev_warn(isp->dev, + "omap3_isp: timeout waiting for ccp2 reset\n"); + break; + } + } +} + +/* + * ccp2_pwr_cfg - Configure the power mode settings + * @ccp2: pointer to ISP CCP2 device + */ +static void ccp2_pwr_cfg(struct isp_ccp2_device *ccp2) +{ + struct isp_device *isp = to_isp_device(ccp2); + + isp_reg_writel(isp, ISPCCP2_SYSCONFIG_MSTANDBY_MODE_SMART | + ((isp->revision == ISP_REVISION_15_0 && isp->autoidle) ? + ISPCCP2_SYSCONFIG_AUTO_IDLE : 0), + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_SYSCONFIG); +} + +/* + * ccp2_if_enable - Enable CCP2 interface. + * @ccp2: pointer to ISP CCP2 device + * @enable: enable/disable flag + */ +static void ccp2_if_enable(struct isp_ccp2_device *ccp2, u8 enable) +{ + struct isp_device *isp = to_isp_device(ccp2); + struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity); + int i; + + /* Enable/Disable all the LCx channels */ + for (i = 0; i < CCP2_LCx_CHANS_NUM; i++) + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(i), + ISPCCP2_LCx_CTRL_CHAN_EN, + enable ? ISPCCP2_LCx_CTRL_CHAN_EN : 0); + + /* Enable/Disable ccp2 interface in ccp2 mode */ + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL, + ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN, + enable ? (ISPCCP2_CTRL_MODE | ISPCCP2_CTRL_IF_EN) : 0); + + /* For frame count propagation */ + if (pipe->do_propagation) { + /* We may want the Frame Start IRQ from LC0 */ + if (enable) + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LC01_IRQENABLE, + ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ); + else + isp_reg_clr(isp, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LC01_IRQENABLE, + ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ); + } +} + +/* + * ccp2_mem_enable - Enable CCP2 memory interface. + * @ccp2: pointer to ISP CCP2 device + * @enable: enable/disable flag + */ +static void ccp2_mem_enable(struct isp_ccp2_device *ccp2, u8 enable) +{ + struct isp_device *isp = to_isp_device(ccp2); + + if (enable) + ccp2_if_enable(ccp2, 0); + + /* Enable/Disable ccp2 interface in ccp2 mode */ + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL, + ISPCCP2_CTRL_MODE, enable ? ISPCCP2_CTRL_MODE : 0); + + isp_reg_clr_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL, + ISPCCP2_LCM_CTRL_CHAN_EN, + enable ? ISPCCP2_LCM_CTRL_CHAN_EN : 0); +} + +/* + * ccp2_phyif_config - Initialize CCP2 phy interface config + * @ccp2: Pointer to ISP CCP2 device + * @config: CCP2 platform data + * + * Configure the CCP2 physical interface module from platform data. + * + * Returns -EIO if strobe is chosen in CSI1 mode, or 0 on success. + */ +static int ccp2_phyif_config(struct isp_ccp2_device *ccp2, + const struct isp_ccp2_platform_data *pdata) +{ + struct isp_device *isp = to_isp_device(ccp2); + u32 val; + + /* CCP2B mode */ + val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL) | + ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE; + /* Data/strobe physical layer */ + BIT_SET(val, ISPCCP2_CTRL_PHY_SEL_SHIFT, ISPCCP2_CTRL_PHY_SEL_MASK, + pdata->phy_layer); + BIT_SET(val, ISPCCP2_CTRL_INV_SHIFT, ISPCCP2_CTRL_INV_MASK, + pdata->strobe_clk_pol); + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL); + + val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL); + if (!(val & ISPCCP2_CTRL_MODE)) { + if (pdata->ccp2_mode) + dev_warn(isp->dev, "OMAP3 CCP2 bus not available\n"); + if (pdata->phy_layer == ISPCCP2_CTRL_PHY_SEL_STROBE) + /* Strobe mode requires CCP2 */ + return -EIO; + } + + return 0; +} + +/* + * ccp2_vp_config - Initialize CCP2 video port interface. + * @ccp2: Pointer to ISP CCP2 device + * @vpclk_div: Video port divisor + * + * Configure the CCP2 video port with the given clock divisor. The valid divisor + * values depend on the ISP revision: + * + * - revision 1.0 and 2.0 1 to 4 + * - revision 15.0 1 to 65536 + * + * The exact divisor value used might differ from the requested value, as ISP + * revision 15.0 represent the divisor by 65536 divided by an integer. + */ +static void ccp2_vp_config(struct isp_ccp2_device *ccp2, + unsigned int vpclk_div) +{ + struct isp_device *isp = to_isp_device(ccp2); + u32 val; + + /* ISPCCP2_CTRL Video port */ + val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL); + val |= ISPCCP2_CTRL_VP_ONLY_EN; /* Disable the memory write port */ + + if (isp->revision == ISP_REVISION_15_0) { + vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 65536); + vpclk_div = min(ISPCCP2_VPCLK_FRACDIV / vpclk_div, 65535U); + BIT_SET(val, ISPCCP2_CTRL_VPCLK_DIV_SHIFT, + ISPCCP2_CTRL_VPCLK_DIV_MASK, vpclk_div); + } else { + vpclk_div = clamp_t(unsigned int, vpclk_div, 1, 4); + BIT_SET(val, ISPCCP2_CTRL_VP_OUT_CTRL_SHIFT, + ISPCCP2_CTRL_VP_OUT_CTRL_MASK, vpclk_div - 1); + } + + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL); +} + +/* + * ccp2_lcx_config - Initialize CCP2 logical channel interface. + * @ccp2: Pointer to ISP CCP2 device + * @config: Pointer to ISP LCx config structure. + * + * This will analyze the parameters passed by the interface config + * and configure CSI1/CCP2 logical channel + * + */ +static void ccp2_lcx_config(struct isp_ccp2_device *ccp2, + struct isp_interface_lcx_config *config) +{ + struct isp_device *isp = to_isp_device(ccp2); + u32 val, format; + + switch (config->format) { + case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8: + format = ISPCCP2_LCx_CTRL_FORMAT_RAW8_DPCM10_VP; + break; + case V4L2_MBUS_FMT_SGRBG10_1X10: + default: + format = ISPCCP2_LCx_CTRL_FORMAT_RAW10_VP; /* RAW10+VP */ + break; + } + /* ISPCCP2_LCx_CTRL logical channel #0 */ + val = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0)) + | (ISPCCP2_LCx_CTRL_REGION_EN); /* Region */ + + if (isp->revision == ISP_REVISION_15_0) { + /* CRC */ + BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT_15_0, + ISPCCP2_LCx_CTRL_CRC_MASK, + config->crc); + /* Format = RAW10+VP or RAW8+DPCM10+VP*/ + BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT_15_0, + ISPCCP2_LCx_CTRL_FORMAT_MASK_15_0, format); + } else { + BIT_SET(val, ISPCCP2_LCx_CTRL_CRC_SHIFT, + ISPCCP2_LCx_CTRL_CRC_MASK, + config->crc); + + BIT_SET(val, ISPCCP2_LCx_CTRL_FORMAT_SHIFT, + ISPCCP2_LCx_CTRL_FORMAT_MASK, format); + } + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_CTRL(0)); + + /* ISPCCP2_DAT_START for logical channel #0 */ + isp_reg_writel(isp, config->data_start << ISPCCP2_LCx_DAT_SHIFT, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_START(0)); + + /* ISPCCP2_DAT_SIZE for logical channel #0 */ + isp_reg_writel(isp, config->data_size << ISPCCP2_LCx_DAT_SHIFT, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCx_DAT_SIZE(0)); + + /* Enable error IRQs for logical channel #0 */ + val = ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ; + + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQSTATUS); + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LC01_IRQENABLE, val); +} + +/* + * ccp2_if_configure - Configure ccp2 with data from sensor + * @ccp2: Pointer to ISP CCP2 device + * + * Return 0 on success or a negative error code + */ +static int ccp2_if_configure(struct isp_ccp2_device *ccp2) +{ + const struct isp_v4l2_subdevs_group *pdata; + struct v4l2_mbus_framefmt *format; + struct media_pad *pad; + struct v4l2_subdev *sensor; + u32 lines = 0; + int ret; + + ccp2_pwr_cfg(ccp2); + + pad = media_entity_remote_source(&ccp2->pads[CCP2_PAD_SINK]); + sensor = media_entity_to_v4l2_subdev(pad->entity); + pdata = sensor->host_priv; + + ret = ccp2_phyif_config(ccp2, &pdata->bus.ccp2); + if (ret < 0) + return ret; + + ccp2_vp_config(ccp2, pdata->bus.ccp2.vpclk_div + 1); + + v4l2_subdev_call(sensor, sensor, g_skip_top_lines, &lines); + + format = &ccp2->formats[CCP2_PAD_SINK]; + + ccp2->if_cfg.data_start = lines; + ccp2->if_cfg.crc = pdata->bus.ccp2.crc; + ccp2->if_cfg.format = format->code; + ccp2->if_cfg.data_size = format->height; + + ccp2_lcx_config(ccp2, &ccp2->if_cfg); + + return 0; +} + +static int ccp2_adjust_bandwidth(struct isp_ccp2_device *ccp2) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity); + struct isp_device *isp = to_isp_device(ccp2); + const struct v4l2_mbus_framefmt *ofmt = &ccp2->formats[CCP2_PAD_SOURCE]; + unsigned long l3_ick = pipe->l3_ick; + struct v4l2_fract *timeperframe; + unsigned int vpclk_div = 2; + unsigned int value; + u64 bound; + u64 area; + + /* Compute the minimum clock divisor, based on the pipeline maximum + * data rate. This is an absolute lower bound if we don't want SBL + * overflows, so round the value up. + */ + vpclk_div = max_t(unsigned int, DIV_ROUND_UP(l3_ick, pipe->max_rate), + vpclk_div); + + /* Compute the maximum clock divisor, based on the requested frame rate. + * This is a soft lower bound to achieve a frame rate equal or higher + * than the requested value, so round the value down. + */ + timeperframe = &pipe->max_timeperframe; + + if (timeperframe->numerator) { + area = ofmt->width * ofmt->height; + bound = div_u64(area * timeperframe->denominator, + timeperframe->numerator); + value = min_t(u64, bound, l3_ick); + vpclk_div = max_t(unsigned int, l3_ick / value, vpclk_div); + } + + dev_dbg(isp->dev, "%s: minimum clock divisor = %u\n", __func__, + vpclk_div); + + return vpclk_div; +} + +/* + * ccp2_mem_configure - Initialize CCP2 memory input/output interface + * @ccp2: Pointer to ISP CCP2 device + * @config: Pointer to ISP mem interface config structure + * + * This will analyze the parameters passed by the interface config + * structure, and configure the respective registers for proper + * CSI1/CCP2 memory input. + */ +static void ccp2_mem_configure(struct isp_ccp2_device *ccp2, + struct isp_interface_mem_config *config) +{ + struct isp_device *isp = to_isp_device(ccp2); + u32 sink_pixcode = ccp2->formats[CCP2_PAD_SINK].code; + u32 source_pixcode = ccp2->formats[CCP2_PAD_SOURCE].code; + unsigned int dpcm_decompress = 0; + u32 val, hwords; + + if (sink_pixcode != source_pixcode && + sink_pixcode == V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8) + dpcm_decompress = 1; + + ccp2_pwr_cfg(ccp2); + + /* Hsize, Skip */ + isp_reg_writel(isp, ISPCCP2_LCM_HSIZE_SKIP_MIN | + (config->hsize_count << ISPCCP2_LCM_HSIZE_SHIFT), + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_HSIZE); + + /* Vsize, no. of lines */ + isp_reg_writel(isp, config->vsize_count << ISPCCP2_LCM_VSIZE_SHIFT, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_VSIZE); + + if (ccp2->video_in.bpl_padding == 0) + config->src_ofst = 0; + else + config->src_ofst = ccp2->video_in.bpl_value; + + isp_reg_writel(isp, config->src_ofst, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LCM_SRC_OFST); + + /* Source and Destination formats */ + val = ISPCCP2_LCM_CTRL_DST_FORMAT_RAW10 << + ISPCCP2_LCM_CTRL_DST_FORMAT_SHIFT; + + if (dpcm_decompress) { + /* source format is RAW8 */ + val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW8 << + ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT; + + /* RAW8 + DPCM10 - simple predictor */ + val |= ISPCCP2_LCM_CTRL_SRC_DPCM_PRED; + + /* enable source DPCM decompression */ + val |= ISPCCP2_LCM_CTRL_SRC_DECOMPR_DPCM10 << + ISPCCP2_LCM_CTRL_SRC_DECOMPR_SHIFT; + } else { + /* source format is RAW10 */ + val |= ISPCCP2_LCM_CTRL_SRC_FORMAT_RAW10 << + ISPCCP2_LCM_CTRL_SRC_FORMAT_SHIFT; + } + + /* Burst size to 32x64 */ + val |= ISPCCP2_LCM_CTRL_BURST_SIZE_32X << + ISPCCP2_LCM_CTRL_BURST_SIZE_SHIFT; + + isp_reg_writel(isp, val, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_CTRL); + + /* Prefetch setup */ + if (dpcm_decompress) + hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN + + config->hsize_count) >> 3; + else + hwords = (ISPCCP2_LCM_HSIZE_SKIP_MIN + + config->hsize_count) >> 2; + + isp_reg_writel(isp, hwords << ISPCCP2_LCM_PREFETCH_SHIFT, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_PREFETCH); + + /* Video port */ + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_CTRL, + ISPCCP2_CTRL_IO_OUT_SEL | ISPCCP2_CTRL_MODE); + ccp2_vp_config(ccp2, ccp2_adjust_bandwidth(ccp2)); + + /* Clear LCM interrupts */ + isp_reg_writel(isp, ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ | + ISPCCP2_LCM_IRQSTATUS_EOF_IRQ, + OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQSTATUS); + + /* Enable LCM interupts */ + isp_reg_set(isp, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_IRQENABLE, + ISPCCP2_LCM_IRQSTATUS_EOF_IRQ | + ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ); +} + +/* + * ccp2_set_inaddr - Sets memory address of input frame. + * @ccp2: Pointer to ISP CCP2 device + * @addr: 32bit memory address aligned on 32byte boundary. + * + * Configures the memory address from which the input frame is to be read. + */ +static void ccp2_set_inaddr(struct isp_ccp2_device *ccp2, u32 addr) +{ + struct isp_device *isp = to_isp_device(ccp2); + + isp_reg_writel(isp, addr, OMAP3_ISP_IOMEM_CCP2, ISPCCP2_LCM_SRC_ADDR); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +static void ccp2_isr_buffer(struct isp_ccp2_device *ccp2) +{ + struct isp_pipeline *pipe = to_isp_pipeline(&ccp2->subdev.entity); + struct isp_buffer *buffer; + + buffer = omap3isp_video_buffer_next(&ccp2->video_in, ccp2->error); + if (buffer != NULL) + ccp2_set_inaddr(ccp2, buffer->isp_addr); + + pipe->state |= ISP_PIPELINE_IDLE_INPUT; + + if (ccp2->state == ISP_PIPELINE_STREAM_SINGLESHOT) { + if (isp_pipeline_ready(pipe)) + omap3isp_pipeline_set_stream(pipe, + ISP_PIPELINE_STREAM_SINGLESHOT); + } + + ccp2->error = 0; +} + +/* + * omap3isp_ccp2_isr - Handle ISP CCP2 interrupts + * @ccp2: Pointer to ISP CCP2 device + * + * This will handle the CCP2 interrupts + * + * Returns -EIO in case of error, or 0 on success. + */ +int omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2) +{ + struct isp_device *isp = to_isp_device(ccp2); + int ret = 0; + static const u32 ISPCCP2_LC01_ERROR = + ISPCCP2_LC01_IRQSTATUS_LC0_FIFO_OVF_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_CRC_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FSP_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FW_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_FSC_IRQ | + ISPCCP2_LC01_IRQSTATUS_LC0_SSC_IRQ; + u32 lcx_irqstatus, lcm_irqstatus; + + /* First clear the interrupts */ + lcx_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LC01_IRQSTATUS); + isp_reg_writel(isp, lcx_irqstatus, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LC01_IRQSTATUS); + + lcm_irqstatus = isp_reg_readl(isp, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LCM_IRQSTATUS); + isp_reg_writel(isp, lcm_irqstatus, OMAP3_ISP_IOMEM_CCP2, + ISPCCP2_LCM_IRQSTATUS); + /* Errors */ + if (lcx_irqstatus & ISPCCP2_LC01_ERROR) { + ccp2->error = 1; + dev_dbg(isp->dev, "CCP2 err:%x\n", lcx_irqstatus); + return -EIO; + } + + if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_OCPERROR_IRQ) { + ccp2->error = 1; + dev_dbg(isp->dev, "CCP2 OCP err:%x\n", lcm_irqstatus); + ret = -EIO; + } + + if (omap3isp_module_sync_is_stopping(&ccp2->wait, &ccp2->stopping)) + return 0; + + /* Frame number propagation */ + if (lcx_irqstatus & ISPCCP2_LC01_IRQSTATUS_LC0_FS_IRQ) { + struct isp_pipeline *pipe = + to_isp_pipeline(&ccp2->subdev.entity); + if (pipe->do_propagation) + atomic_inc(&pipe->frame_number); + } + + /* Handle queued buffers on frame end interrupts */ + if (lcm_irqstatus & ISPCCP2_LCM_IRQSTATUS_EOF_IRQ) + ccp2_isr_buffer(ccp2); + + return ret; +} + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static const unsigned int ccp2_fmts[] = { + V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, +}; + +/* + * __ccp2_get_format - helper function for getting ccp2 format + * @ccp2 : Pointer to ISP CCP2 device + * @fh : V4L2 subdev file handle + * @pad : pad number + * @which : wanted subdev format + * return format structure or NULL on error + */ +static struct v4l2_mbus_framefmt * +__ccp2_get_format(struct isp_ccp2_device *ccp2, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &ccp2->formats[pad]; +} + +/* + * ccp2_try_format - Handle try format by pad subdev method + * @ccp2 : Pointer to ISP CCP2 device + * @fh : V4L2 subdev file handle + * @pad : pad num + * @fmt : pointer to v4l2 mbus format structure + * @which : wanted subdev format + */ +static void ccp2_try_format(struct isp_ccp2_device *ccp2, + struct v4l2_subdev_fh *fh, unsigned int pad, + struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + struct v4l2_mbus_framefmt *format; + + switch (pad) { + case CCP2_PAD_SINK: + if (fmt->code != V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8) + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + + if (ccp2->input == CCP2_INPUT_SENSOR) { + fmt->width = clamp_t(u32, fmt->width, + ISPCCP2_DAT_START_MIN, + ISPCCP2_DAT_START_MAX); + fmt->height = clamp_t(u32, fmt->height, + ISPCCP2_DAT_SIZE_MIN, + ISPCCP2_DAT_SIZE_MAX); + } else if (ccp2->input == CCP2_INPUT_MEMORY) { + fmt->width = clamp_t(u32, fmt->width, + ISPCCP2_LCM_HSIZE_COUNT_MIN, + ISPCCP2_LCM_HSIZE_COUNT_MAX); + fmt->height = clamp_t(u32, fmt->height, + ISPCCP2_LCM_VSIZE_MIN, + ISPCCP2_LCM_VSIZE_MAX); + } + break; + + case CCP2_PAD_SOURCE: + /* Source format - copy sink format and change pixel code + * to SGRBG10_1X10 as we don't support CCP2 write to memory. + * When CCP2 write to memory feature will be added this + * should be changed properly. + */ + format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SINK, which); + memcpy(fmt, format, sizeof(*fmt)); + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + break; + } + + fmt->field = V4L2_FIELD_NONE; + fmt->colorspace = V4L2_COLORSPACE_SRGB; +} + +/* + * ccp2_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int ccp2_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + if (code->pad == CCP2_PAD_SINK) { + if (code->index >= ARRAY_SIZE(ccp2_fmts)) + return -EINVAL; + + code->code = ccp2_fmts[code->index]; + } else { + if (code->index != 0) + return -EINVAL; + + format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SINK, + V4L2_SUBDEV_FORMAT_TRY); + code->code = format->code; + } + + return 0; +} + +static int ccp2_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + ccp2_try_format(ccp2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + ccp2_try_format(ccp2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * ccp2_get_format - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt : pointer to v4l2 subdev format structure + * return -EINVAL or zero on sucess + */ +static int ccp2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __ccp2_get_format(ccp2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * ccp2_set_format - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt : pointer to v4l2 subdev format structure + * returns zero + */ +static int ccp2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __ccp2_get_format(ccp2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + ccp2_try_format(ccp2, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == CCP2_PAD_SINK) { + format = __ccp2_get_format(ccp2, fh, CCP2_PAD_SOURCE, + fmt->which); + *format = fmt->format; + ccp2_try_format(ccp2, fh, CCP2_PAD_SOURCE, format, fmt->which); + } + + return 0; +} + +/* + * ccp2_init_formats - Initialize formats on all pads + * @sd: ISP CCP2 V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int ccp2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = CCP2_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + format.format.width = 4096; + format.format.height = 4096; + ccp2_set_format(sd, fh, &format); + + return 0; +} + +/* + * ccp2_s_stream - Enable/Disable streaming on ccp2 subdev + * @sd : pointer to v4l2 subdev structure + * @enable: 1 == Enable, 0 == Disable + * return zero + */ +static int ccp2_s_stream(struct v4l2_subdev *sd, int enable) +{ + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + struct isp_device *isp = to_isp_device(ccp2); + struct device *dev = to_device(ccp2); + int ret; + + if (ccp2->state == ISP_PIPELINE_STREAM_STOPPED) { + if (enable == ISP_PIPELINE_STREAM_STOPPED) + return 0; + atomic_set(&ccp2->stopping, 0); + ccp2->error = 0; + } + + switch (enable) { + case ISP_PIPELINE_STREAM_CONTINUOUS: + if (ccp2->phy) { + ret = omap3isp_csiphy_acquire(ccp2->phy); + if (ret < 0) + return ret; + } + + ccp2_if_configure(ccp2); + ccp2_print_status(ccp2); + + /* Enable CSI1/CCP2 interface */ + ccp2_if_enable(ccp2, 1); + break; + + case ISP_PIPELINE_STREAM_SINGLESHOT: + if (ccp2->state != ISP_PIPELINE_STREAM_SINGLESHOT) { + struct v4l2_mbus_framefmt *format; + + format = &ccp2->formats[CCP2_PAD_SINK]; + + ccp2->mem_cfg.hsize_count = format->width; + ccp2->mem_cfg.vsize_count = format->height; + ccp2->mem_cfg.src_ofst = 0; + + ccp2_mem_configure(ccp2, &ccp2->mem_cfg); + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI1_READ); + ccp2_print_status(ccp2); + } + ccp2_mem_enable(ccp2, 1); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + if (omap3isp_module_sync_idle(&sd->entity, &ccp2->wait, + &ccp2->stopping)) + dev_dbg(dev, "%s: module stop timeout.\n", sd->name); + if (ccp2->input == CCP2_INPUT_MEMORY) { + ccp2_mem_enable(ccp2, 0); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI1_READ); + } else if (ccp2->input == CCP2_INPUT_SENSOR) { + /* Disable CSI1/CCP2 interface */ + ccp2_if_enable(ccp2, 0); + if (ccp2->phy) + omap3isp_csiphy_release(ccp2->phy); + } + break; + } + + ccp2->state = enable; + return 0; +} + +/* subdev video operations */ +static const struct v4l2_subdev_video_ops ccp2_sd_video_ops = { + .s_stream = ccp2_s_stream, +}; + +/* subdev pad operations */ +static const struct v4l2_subdev_pad_ops ccp2_sd_pad_ops = { + .enum_mbus_code = ccp2_enum_mbus_code, + .enum_frame_size = ccp2_enum_frame_size, + .get_fmt = ccp2_get_format, + .set_fmt = ccp2_set_format, +}; + +/* subdev operations */ +static const struct v4l2_subdev_ops ccp2_sd_ops = { + .video = &ccp2_sd_video_ops, + .pad = &ccp2_sd_pad_ops, +}; + +/* subdev internal operations */ +static const struct v4l2_subdev_internal_ops ccp2_sd_internal_ops = { + .open = ccp2_init_formats, +}; + +/* -------------------------------------------------------------------------- + * ISP ccp2 video device node + */ + +/* + * ccp2_video_queue - Queue video buffer. + * @video : Pointer to isp video structure + * @buffer: Pointer to isp_buffer structure + * return -EIO or zero on success + */ +static int ccp2_video_queue(struct isp_video *video, struct isp_buffer *buffer) +{ + struct isp_ccp2_device *ccp2 = &video->isp->isp_ccp2; + + ccp2_set_inaddr(ccp2, buffer->isp_addr); + return 0; +} + +static const struct isp_video_operations ccp2_video_ops = { + .queue = ccp2_video_queue, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * ccp2_link_setup - Setup ccp2 connections. + * @entity : Pointer to media entity structure + * @local : Pointer to local pad array + * @remote : Pointer to remote pad array + * @flags : Link flags + * return -EINVAL on error or zero on success + */ +static int ccp2_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct isp_ccp2_device *ccp2 = v4l2_get_subdevdata(sd); + + switch (local->index | media_entity_type(remote->entity)) { + case CCP2_PAD_SINK | MEDIA_ENT_T_DEVNODE: + /* read from memory */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (ccp2->input == CCP2_INPUT_SENSOR) + return -EBUSY; + ccp2->input = CCP2_INPUT_MEMORY; + } else { + if (ccp2->input == CCP2_INPUT_MEMORY) + ccp2->input = CCP2_INPUT_NONE; + } + break; + + case CCP2_PAD_SINK | MEDIA_ENT_T_V4L2_SUBDEV: + /* read from sensor/phy */ + if (flags & MEDIA_LNK_FL_ENABLED) { + if (ccp2->input == CCP2_INPUT_MEMORY) + return -EBUSY; + ccp2->input = CCP2_INPUT_SENSOR; + } else { + if (ccp2->input == CCP2_INPUT_SENSOR) + ccp2->input = CCP2_INPUT_NONE; + } break; + + case CCP2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV: + /* write to video port/ccdc */ + if (flags & MEDIA_LNK_FL_ENABLED) + ccp2->output = CCP2_OUTPUT_CCDC; + else + ccp2->output = CCP2_OUTPUT_NONE; + break; + + default: + return -EINVAL; + } + + return 0; +} + +/* media operations */ +static const struct media_entity_operations ccp2_media_ops = { + .link_setup = ccp2_link_setup, +}; + +/* + * ccp2_init_entities - Initialize ccp2 subdev and media entity. + * @ccp2: Pointer to ISP CCP2 device + * return negative error code or zero on success + */ +static int ccp2_init_entities(struct isp_ccp2_device *ccp2) +{ + struct v4l2_subdev *sd = &ccp2->subdev; + struct media_pad *pads = ccp2->pads; + struct media_entity *me = &sd->entity; + int ret; + + ccp2->input = CCP2_INPUT_NONE; + ccp2->output = CCP2_OUTPUT_NONE; + + v4l2_subdev_init(sd, &ccp2_sd_ops); + sd->internal_ops = &ccp2_sd_internal_ops; + strlcpy(sd->name, "OMAP3 ISP CCP2", sizeof(sd->name)); + sd->grp_id = 1 << 16; /* group ID for isp subdevs */ + v4l2_set_subdevdata(sd, ccp2); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + pads[CCP2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + pads[CCP2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + + me->ops = &ccp2_media_ops; + ret = media_entity_init(me, CCP2_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + ccp2_init_formats(sd, NULL); + + /* + * The CCP2 has weird line alignment requirements, possibly caused by + * DPCM8 decompression. Line length for data read from memory must be a + * multiple of 128 bits (16 bytes) in continuous mode (when no padding + * is present at end of lines). Additionally, if padding is used, the + * padded line length must be a multiple of 32 bytes. To simplify the + * implementation we use a fixed 32 bytes alignment regardless of the + * input format and width. If strict 128 bits alignment support is + * required ispvideo will need to be made aware of this special dual + * alignement requirements. + */ + ccp2->video_in.type = V4L2_BUF_TYPE_VIDEO_OUTPUT; + ccp2->video_in.bpl_alignment = 32; + ccp2->video_in.bpl_max = 0xffffffe0; + ccp2->video_in.isp = to_isp_device(ccp2); + ccp2->video_in.ops = &ccp2_video_ops; + ccp2->video_in.capture_mem = PAGE_ALIGN(4096 * 4096) * 3; + + ret = omap3isp_video_init(&ccp2->video_in, "CCP2"); + if (ret < 0) + return ret; + + /* Connect the video node to the ccp2 subdev. */ + ret = media_entity_create_link(&ccp2->video_in.video.entity, 0, + &ccp2->subdev.entity, CCP2_PAD_SINK, 0); + if (ret < 0) + return ret; + + return 0; +} + +/* + * omap3isp_ccp2_unregister_entities - Unregister media entities: subdev + * @ccp2: Pointer to ISP CCP2 device + */ +void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2) +{ + media_entity_cleanup(&ccp2->subdev.entity); + + v4l2_device_unregister_subdev(&ccp2->subdev); + omap3isp_video_unregister(&ccp2->video_in); +} + +/* + * omap3isp_ccp2_register_entities - Register the subdev media entity + * @ccp2: Pointer to ISP CCP2 device + * @vdev: Pointer to v4l device + * return negative error code or zero on success + */ + +int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video nodes. */ + ret = v4l2_device_register_subdev(vdev, &ccp2->subdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&ccp2->video_in, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap3isp_ccp2_unregister_entities(ccp2); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP ccp2 initialisation and cleanup + */ + +/* + * omap3isp_ccp2_cleanup - CCP2 un-initialization + * @isp : Pointer to ISP device + */ +void omap3isp_ccp2_cleanup(struct isp_device *isp) +{ +} + +/* + * omap3isp_ccp2_init - CCP2 initialization. + * @isp : Pointer to ISP device + * return negative error code or zero on success + */ +int omap3isp_ccp2_init(struct isp_device *isp) +{ + struct isp_ccp2_device *ccp2 = &isp->isp_ccp2; + int ret; + + init_waitqueue_head(&ccp2->wait); + + /* On the OMAP36xx, the CCP2 uses the CSI PHY1 or PHY2, shared with + * the CSI2c or CSI2a receivers. The PHY then needs to be explicitly + * configured. + * + * TODO: Don't hardcode the usage of PHY1 (shared with CSI2c). + */ + if (isp->revision == ISP_REVISION_15_0) + ccp2->phy = &isp->isp_csiphy1; + + ret = ccp2_init_entities(ccp2); + if (ret < 0) + goto out; + + ccp2_reset(ccp2); +out: + if (ret) + omap3isp_ccp2_cleanup(isp); + + return ret; +} diff --git a/drivers/media/video/omap3isp/ispccp2.h b/drivers/media/video/omap3isp/ispccp2.h new file mode 100644 index 0000000..5505a86 --- /dev/null +++ b/drivers/media/video/omap3isp/ispccp2.h @@ -0,0 +1,98 @@ +/* + * ispccp2.h + * + * TI OMAP3 ISP - CCP2 module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2010 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_CCP2_H +#define OMAP3_ISP_CCP2_H + +#include <linux/videodev2.h> + +struct isp_device; +struct isp_csiphy; + +/* Sink and source ccp2 pads */ +#define CCP2_PAD_SINK 0 +#define CCP2_PAD_SOURCE 1 +#define CCP2_PADS_NUM 2 + +/* CCP2 input media entity */ +enum ccp2_input_entity { + CCP2_INPUT_NONE, + CCP2_INPUT_SENSOR, + CCP2_INPUT_MEMORY, +}; + +/* CCP2 output media entity */ +enum ccp2_output_entity { + CCP2_OUTPUT_NONE, + CCP2_OUTPUT_CCDC, + CCP2_OUTPUT_MEMORY, +}; + + +/* Logical channel configuration */ +struct isp_interface_lcx_config { + int crc; + u32 data_start; + u32 data_size; + u32 format; +}; + +/* Memory channel configuration */ +struct isp_interface_mem_config { + u32 dst_port; + u32 vsize_count; + u32 hsize_count; + u32 src_ofst; + u32 dst_ofst; +}; + +/* CCP2 device */ +struct isp_ccp2_device { + struct v4l2_subdev subdev; + struct v4l2_mbus_framefmt formats[CCP2_PADS_NUM]; + struct media_pad pads[CCP2_PADS_NUM]; + + enum ccp2_input_entity input; + enum ccp2_output_entity output; + struct isp_interface_lcx_config if_cfg; + struct isp_interface_mem_config mem_cfg; + struct isp_video video_in; + struct isp_csiphy *phy; + unsigned int error; + enum isp_pipeline_stream_state state; + wait_queue_head_t wait; + atomic_t stopping; +}; + +/* Function declarations */ +int omap3isp_ccp2_init(struct isp_device *isp); +void omap3isp_ccp2_cleanup(struct isp_device *isp); +int omap3isp_ccp2_register_entities(struct isp_ccp2_device *ccp2, + struct v4l2_device *vdev); +void omap3isp_ccp2_unregister_entities(struct isp_ccp2_device *ccp2); +int omap3isp_ccp2_isr(struct isp_ccp2_device *ccp2); + +#endif /* OMAP3_ISP_CCP2_H */ diff --git a/drivers/media/video/omap3isp/ispcsi2.c b/drivers/media/video/omap3isp/ispcsi2.c new file mode 100644 index 0000000..fb503f3 --- /dev/null +++ b/drivers/media/video/omap3isp/ispcsi2.c @@ -0,0 +1,1317 @@ +/* + * ispcsi2.c + * + * TI OMAP3 ISP - CSI2 module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ +#include <linux/delay.h> +#include <media/v4l2-common.h> +#include <linux/v4l2-mediabus.h> +#include <linux/mm.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispcsi2.h" + +/* + * csi2_if_enable - Enable CSI2 Receiver interface. + * @enable: enable flag + * + */ +static void csi2_if_enable(struct isp_device *isp, + struct isp_csi2_device *csi2, u8 enable) +{ + struct isp_csi2_ctrl_cfg *currctrl = &csi2->ctrl; + + isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_CTRL, ISPCSI2_CTRL_IF_EN, + enable ? ISPCSI2_CTRL_IF_EN : 0); + + currctrl->if_enable = enable; +} + +/* + * csi2_recv_config - CSI2 receiver module configuration. + * @currctrl: isp_csi2_ctrl_cfg structure + * + */ +static void csi2_recv_config(struct isp_device *isp, + struct isp_csi2_device *csi2, + struct isp_csi2_ctrl_cfg *currctrl) +{ + u32 reg; + + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTRL); + + if (currctrl->frame_mode) + reg |= ISPCSI2_CTRL_FRAME; + else + reg &= ~ISPCSI2_CTRL_FRAME; + + if (currctrl->vp_clk_enable) + reg |= ISPCSI2_CTRL_VP_CLK_EN; + else + reg &= ~ISPCSI2_CTRL_VP_CLK_EN; + + if (currctrl->vp_only_enable) + reg |= ISPCSI2_CTRL_VP_ONLY_EN; + else + reg &= ~ISPCSI2_CTRL_VP_ONLY_EN; + + reg &= ~ISPCSI2_CTRL_VP_OUT_CTRL_MASK; + reg |= currctrl->vp_out_ctrl << ISPCSI2_CTRL_VP_OUT_CTRL_SHIFT; + + if (currctrl->ecc_enable) + reg |= ISPCSI2_CTRL_ECC_EN; + else + reg &= ~ISPCSI2_CTRL_ECC_EN; + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTRL); +} + +static const unsigned int csi2_input_fmts[] = { + V4L2_MBUS_FMT_SGRBG10_1X10, + V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8, + V4L2_MBUS_FMT_SRGGB10_1X10, + V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8, + V4L2_MBUS_FMT_SBGGR10_1X10, + V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8, + V4L2_MBUS_FMT_SGBRG10_1X10, + V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8, +}; + +/* To set the format on the CSI2 requires a mapping function that takes + * the following inputs: + * - 2 different formats (at this time) + * - 2 destinations (mem, vp+mem) (vp only handled separately) + * - 2 decompression options (on, off) + * - 2 isp revisions (certain format must be handled differently on OMAP3630) + * Output should be CSI2 frame format code + * Array indices as follows: [format][dest][decompr][is_3630] + * Not all combinations are valid. 0 means invalid. + */ +static const u16 __csi2_fmt_map[2][2][2][2] = { + /* RAW10 formats */ + { + /* Output to memory */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_RAW10_EXP16, CSI2_PIX_FMT_RAW10_EXP16 }, + /* DPCM decompression */ + { 0, 0 }, + }, + /* Output to both */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_RAW10_EXP16_VP, + CSI2_PIX_FMT_RAW10_EXP16_VP }, + /* DPCM decompression */ + { 0, 0 }, + }, + }, + /* RAW10 DPCM8 formats */ + { + /* Output to memory */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_RAW8, CSI2_USERDEF_8BIT_DATA1 }, + /* DPCM decompression */ + { CSI2_PIX_FMT_RAW8_DPCM10_EXP16, + CSI2_USERDEF_8BIT_DATA1_DPCM10 }, + }, + /* Output to both */ + { + /* No DPCM decompression */ + { CSI2_PIX_FMT_RAW8_VP, + CSI2_PIX_FMT_RAW8_VP }, + /* DPCM decompression */ + { CSI2_PIX_FMT_RAW8_DPCM10_VP, + CSI2_USERDEF_8BIT_DATA1_DPCM10_VP }, + }, + }, +}; + +/* + * csi2_ctx_map_format - Map CSI2 sink media bus format to CSI2 format ID + * @csi2: ISP CSI2 device + * + * Returns CSI2 physical format id + */ +static u16 csi2_ctx_map_format(struct isp_csi2_device *csi2) +{ + const struct v4l2_mbus_framefmt *fmt = &csi2->formats[CSI2_PAD_SINK]; + int fmtidx, destidx, is_3630; + + switch (fmt->code) { + case V4L2_MBUS_FMT_SGRBG10_1X10: + case V4L2_MBUS_FMT_SRGGB10_1X10: + case V4L2_MBUS_FMT_SBGGR10_1X10: + case V4L2_MBUS_FMT_SGBRG10_1X10: + fmtidx = 0; + break; + case V4L2_MBUS_FMT_SGRBG10_DPCM8_1X8: + case V4L2_MBUS_FMT_SRGGB10_DPCM8_1X8: + case V4L2_MBUS_FMT_SBGGR10_DPCM8_1X8: + case V4L2_MBUS_FMT_SGBRG10_DPCM8_1X8: + fmtidx = 1; + break; + default: + WARN(1, KERN_ERR "CSI2: pixel format %08x unsupported!\n", + fmt->code); + return 0; + } + + if (!(csi2->output & CSI2_OUTPUT_CCDC) && + !(csi2->output & CSI2_OUTPUT_MEMORY)) { + /* Neither output enabled is a valid combination */ + return CSI2_PIX_FMT_OTHERS; + } + + /* If we need to skip frames at the beginning of the stream disable the + * video port to avoid sending the skipped frames to the CCDC. + */ + destidx = csi2->frame_skip ? 0 : !!(csi2->output & CSI2_OUTPUT_CCDC); + is_3630 = csi2->isp->revision == ISP_REVISION_15_0; + + return __csi2_fmt_map[fmtidx][destidx][csi2->dpcm_decompress][is_3630]; +} + +/* + * csi2_set_outaddr - Set memory address to save output image + * @csi2: Pointer to ISP CSI2a device. + * @addr: ISP MMU Mapped 32-bit memory address aligned on 32 byte boundary. + * + * Sets the memory address where the output will be saved. + * + * Returns 0 if successful, or -EINVAL if the address is not in the 32 byte + * boundary. + */ +static void csi2_set_outaddr(struct isp_csi2_device *csi2, u32 addr) +{ + struct isp_device *isp = csi2->isp; + struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[0]; + + ctx->ping_addr = addr; + ctx->pong_addr = addr; + isp_reg_writel(isp, ctx->ping_addr, + csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum)); + isp_reg_writel(isp, ctx->pong_addr, + csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum)); +} + +/* + * is_usr_def_mapping - Checks whether USER_DEF_MAPPING should + * be enabled by CSI2. + * @format_id: mapped format id + * + */ +static inline int is_usr_def_mapping(u32 format_id) +{ + return (format_id & 0x40) ? 1 : 0; +} + +/* + * csi2_ctx_enable - Enable specified CSI2 context + * @ctxnum: Context number, valid between 0 and 7 values. + * @enable: enable + * + */ +static void csi2_ctx_enable(struct isp_device *isp, + struct isp_csi2_device *csi2, u8 ctxnum, u8 enable) +{ + struct isp_csi2_ctx_cfg *ctx = &csi2->contexts[ctxnum]; + unsigned int skip = 0; + u32 reg; + + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum)); + + if (enable) { + if (csi2->frame_skip) + skip = csi2->frame_skip; + else if (csi2->output & CSI2_OUTPUT_MEMORY) + skip = 1; + + reg &= ~ISPCSI2_CTX_CTRL1_COUNT_MASK; + reg |= ISPCSI2_CTX_CTRL1_COUNT_UNLOCK + | (skip << ISPCSI2_CTX_CTRL1_COUNT_SHIFT) + | ISPCSI2_CTX_CTRL1_CTX_EN; + } else { + reg &= ~ISPCSI2_CTX_CTRL1_CTX_EN; + } + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctxnum)); + ctx->enabled = enable; +} + +/* + * csi2_ctx_config - CSI2 context configuration. + * @ctx: context configuration + * + */ +static void csi2_ctx_config(struct isp_device *isp, + struct isp_csi2_device *csi2, + struct isp_csi2_ctx_cfg *ctx) +{ + u32 reg; + + /* Set up CSI2_CTx_CTRL1 */ + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum)); + + if (ctx->eof_enabled) + reg |= ISPCSI2_CTX_CTRL1_EOF_EN; + else + reg &= ~ISPCSI2_CTX_CTRL1_EOF_EN; + + if (ctx->eol_enabled) + reg |= ISPCSI2_CTX_CTRL1_EOL_EN; + else + reg &= ~ISPCSI2_CTX_CTRL1_EOL_EN; + + if (ctx->checksum_enabled) + reg |= ISPCSI2_CTX_CTRL1_CS_EN; + else + reg &= ~ISPCSI2_CTX_CTRL1_CS_EN; + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL1(ctx->ctxnum)); + + /* Set up CSI2_CTx_CTRL2 */ + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum)); + + reg &= ~(ISPCSI2_CTX_CTRL2_VIRTUAL_ID_MASK); + reg |= ctx->virtual_id << ISPCSI2_CTX_CTRL2_VIRTUAL_ID_SHIFT; + + reg &= ~(ISPCSI2_CTX_CTRL2_FORMAT_MASK); + reg |= ctx->format_id << ISPCSI2_CTX_CTRL2_FORMAT_SHIFT; + + if (ctx->dpcm_decompress) { + if (ctx->dpcm_predictor) + reg |= ISPCSI2_CTX_CTRL2_DPCM_PRED; + else + reg &= ~ISPCSI2_CTX_CTRL2_DPCM_PRED; + } + + if (is_usr_def_mapping(ctx->format_id)) { + reg &= ~ISPCSI2_CTX_CTRL2_USER_DEF_MAP_MASK; + reg |= 2 << ISPCSI2_CTX_CTRL2_USER_DEF_MAP_SHIFT; + } + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL2(ctx->ctxnum)); + + /* Set up CSI2_CTx_CTRL3 */ + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum)); + reg &= ~(ISPCSI2_CTX_CTRL3_ALPHA_MASK); + reg |= (ctx->alpha << ISPCSI2_CTX_CTRL3_ALPHA_SHIFT); + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_CTX_CTRL3(ctx->ctxnum)); + + /* Set up CSI2_CTx_DAT_OFST */ + reg = isp_reg_readl(isp, csi2->regs1, + ISPCSI2_CTX_DAT_OFST(ctx->ctxnum)); + reg &= ~ISPCSI2_CTX_DAT_OFST_OFST_MASK; + reg |= ctx->data_offset << ISPCSI2_CTX_DAT_OFST_OFST_SHIFT; + isp_reg_writel(isp, reg, csi2->regs1, + ISPCSI2_CTX_DAT_OFST(ctx->ctxnum)); + + isp_reg_writel(isp, ctx->ping_addr, + csi2->regs1, ISPCSI2_CTX_DAT_PING_ADDR(ctx->ctxnum)); + + isp_reg_writel(isp, ctx->pong_addr, + csi2->regs1, ISPCSI2_CTX_DAT_PONG_ADDR(ctx->ctxnum)); +} + +/* + * csi2_timing_config - CSI2 timing configuration. + * @timing: csi2_timing_cfg structure + */ +static void csi2_timing_config(struct isp_device *isp, + struct isp_csi2_device *csi2, + struct isp_csi2_timing_cfg *timing) +{ + u32 reg; + + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_TIMING); + + if (timing->force_rx_mode) + reg |= ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum); + else + reg &= ~ISPCSI2_TIMING_FORCE_RX_MODE_IO(timing->ionum); + + if (timing->stop_state_16x) + reg |= ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum); + else + reg &= ~ISPCSI2_TIMING_STOP_STATE_X16_IO(timing->ionum); + + if (timing->stop_state_4x) + reg |= ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum); + else + reg &= ~ISPCSI2_TIMING_STOP_STATE_X4_IO(timing->ionum); + + reg &= ~ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_MASK(timing->ionum); + reg |= timing->stop_state_counter << + ISPCSI2_TIMING_STOP_STATE_COUNTER_IO_SHIFT(timing->ionum); + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_TIMING); +} + +/* + * csi2_irq_ctx_set - Enables CSI2 Context IRQs. + * @enable: Enable/disable CSI2 Context interrupts + */ +static void csi2_irq_ctx_set(struct isp_device *isp, + struct isp_csi2_device *csi2, int enable) +{ + u32 reg = ISPCSI2_CTX_IRQSTATUS_FE_IRQ; + int i; + + if (csi2->use_fs_irq) + reg |= ISPCSI2_CTX_IRQSTATUS_FS_IRQ; + + for (i = 0; i < 8; i++) { + isp_reg_writel(isp, reg, csi2->regs1, + ISPCSI2_CTX_IRQSTATUS(i)); + if (enable) + isp_reg_set(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i), + reg); + else + isp_reg_clr(isp, csi2->regs1, ISPCSI2_CTX_IRQENABLE(i), + reg); + } +} + +/* + * csi2_irq_complexio1_set - Enables CSI2 ComplexIO IRQs. + * @enable: Enable/disable CSI2 ComplexIO #1 interrupts + */ +static void csi2_irq_complexio1_set(struct isp_device *isp, + struct isp_csi2_device *csi2, int enable) +{ + u32 reg; + reg = ISPCSI2_PHY_IRQENABLE_STATEALLULPMEXIT | + ISPCSI2_PHY_IRQENABLE_STATEALLULPMENTER | + ISPCSI2_PHY_IRQENABLE_STATEULPM5 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL5 | + ISPCSI2_PHY_IRQENABLE_ERRESC5 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS5 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS5 | + ISPCSI2_PHY_IRQENABLE_STATEULPM4 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL4 | + ISPCSI2_PHY_IRQENABLE_ERRESC4 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS4 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS4 | + ISPCSI2_PHY_IRQENABLE_STATEULPM3 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL3 | + ISPCSI2_PHY_IRQENABLE_ERRESC3 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS3 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS3 | + ISPCSI2_PHY_IRQENABLE_STATEULPM2 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL2 | + ISPCSI2_PHY_IRQENABLE_ERRESC2 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS2 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS2 | + ISPCSI2_PHY_IRQENABLE_STATEULPM1 | + ISPCSI2_PHY_IRQENABLE_ERRCONTROL1 | + ISPCSI2_PHY_IRQENABLE_ERRESC1 | + ISPCSI2_PHY_IRQENABLE_ERRSOTSYNCHS1 | + ISPCSI2_PHY_IRQENABLE_ERRSOTHS1; + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQSTATUS); + if (enable) + reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_PHY_IRQENABLE); + else + reg = 0; + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_PHY_IRQENABLE); +} + +/* + * csi2_irq_status_set - Enables CSI2 Status IRQs. + * @enable: Enable/disable CSI2 Status interrupts + */ +static void csi2_irq_status_set(struct isp_device *isp, + struct isp_csi2_device *csi2, int enable) +{ + u32 reg; + reg = ISPCSI2_IRQSTATUS_OCP_ERR_IRQ | + ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ | + ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ | + ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ | + ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ | + ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ | + ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ | + ISPCSI2_IRQSTATUS_CONTEXT(0); + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQSTATUS); + if (enable) + reg |= isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQENABLE); + else + reg = 0; + + isp_reg_writel(isp, reg, csi2->regs1, ISPCSI2_IRQENABLE); +} + +/* + * omap3isp_csi2_reset - Resets the CSI2 module. + * + * Must be called with the phy lock held. + * + * Returns 0 if successful, or -EBUSY if power command didn't respond. + */ +int omap3isp_csi2_reset(struct isp_csi2_device *csi2) +{ + struct isp_device *isp = csi2->isp; + u8 soft_reset_retries = 0; + u32 reg; + int i; + + if (!csi2->available) + return -ENODEV; + + if (csi2->phy->phy_in_use) + return -EBUSY; + + isp_reg_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, + ISPCSI2_SYSCONFIG_SOFT_RESET); + + do { + reg = isp_reg_readl(isp, csi2->regs1, ISPCSI2_SYSSTATUS) & + ISPCSI2_SYSSTATUS_RESET_DONE; + if (reg == ISPCSI2_SYSSTATUS_RESET_DONE) + break; + soft_reset_retries++; + if (soft_reset_retries < 5) + udelay(100); + } while (soft_reset_retries < 5); + + if (soft_reset_retries == 5) { + printk(KERN_ERR "CSI2: Soft reset try count exceeded!\n"); + return -EBUSY; + } + + if (isp->revision == ISP_REVISION_15_0) + isp_reg_set(isp, csi2->regs1, ISPCSI2_PHY_CFG, + ISPCSI2_PHY_CFG_RESET_CTRL); + + i = 100; + do { + reg = isp_reg_readl(isp, csi2->phy->phy_regs, ISPCSIPHY_REG1) + & ISPCSIPHY_REG1_RESET_DONE_CTRLCLK; + if (reg == ISPCSIPHY_REG1_RESET_DONE_CTRLCLK) + break; + udelay(100); + } while (--i > 0); + + if (i == 0) { + printk(KERN_ERR + "CSI2: Reset for CSI2_96M_FCLK domain Failed!\n"); + return -EBUSY; + } + + if (isp->autoidle) + isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, + ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK | + ISPCSI2_SYSCONFIG_AUTO_IDLE, + ISPCSI2_SYSCONFIG_MSTANDBY_MODE_SMART | + ((isp->revision == ISP_REVISION_15_0) ? + ISPCSI2_SYSCONFIG_AUTO_IDLE : 0)); + else + isp_reg_clr_set(isp, csi2->regs1, ISPCSI2_SYSCONFIG, + ISPCSI2_SYSCONFIG_MSTANDBY_MODE_MASK | + ISPCSI2_SYSCONFIG_AUTO_IDLE, + ISPCSI2_SYSCONFIG_MSTANDBY_MODE_NO); + + return 0; +} + +static int csi2_configure(struct isp_csi2_device *csi2) +{ + const struct isp_v4l2_subdevs_group *pdata; + struct isp_device *isp = csi2->isp; + struct isp_csi2_timing_cfg *timing = &csi2->timing[0]; + struct v4l2_subdev *sensor; + struct media_pad *pad; + + /* + * CSI2 fields that can be updated while the context has + * been enabled or the interface has been enabled are not + * updated dynamically currently. So we do not allow to + * reconfigure if either has been enabled + */ + if (csi2->contexts[0].enabled || csi2->ctrl.if_enable) + return -EBUSY; + + pad = media_entity_remote_source(&csi2->pads[CSI2_PAD_SINK]); + sensor = media_entity_to_v4l2_subdev(pad->entity); + pdata = sensor->host_priv; + + csi2->frame_skip = 0; + v4l2_subdev_call(sensor, sensor, g_skip_frames, &csi2->frame_skip); + + csi2->ctrl.vp_out_ctrl = pdata->bus.csi2.vpclk_div; + csi2->ctrl.frame_mode = ISP_CSI2_FRAME_IMMEDIATE; + csi2->ctrl.ecc_enable = pdata->bus.csi2.crc; + + timing->ionum = 1; + timing->force_rx_mode = 1; + timing->stop_state_16x = 1; + timing->stop_state_4x = 1; + timing->stop_state_counter = 0x1FF; + + /* + * The CSI2 receiver can't do any format conversion except DPCM + * decompression, so every set_format call configures both pads + * and enables DPCM decompression as a special case: + */ + if (csi2->formats[CSI2_PAD_SINK].code != + csi2->formats[CSI2_PAD_SOURCE].code) + csi2->dpcm_decompress = true; + else + csi2->dpcm_decompress = false; + + csi2->contexts[0].format_id = csi2_ctx_map_format(csi2); + + if (csi2->video_out.bpl_padding == 0) + csi2->contexts[0].data_offset = 0; + else + csi2->contexts[0].data_offset = csi2->video_out.bpl_value; + + /* + * Enable end of frame and end of line signals generation for + * context 0. These signals are generated from CSI2 receiver to + * qualify the last pixel of a frame and the last pixel of a line. + * Without enabling the signals CSI2 receiver writes data to memory + * beyond buffer size and/or data line offset is not handled correctly. + */ + csi2->contexts[0].eof_enabled = 1; + csi2->contexts[0].eol_enabled = 1; + + csi2_irq_complexio1_set(isp, csi2, 1); + csi2_irq_ctx_set(isp, csi2, 1); + csi2_irq_status_set(isp, csi2, 1); + + /* Set configuration (timings, format and links) */ + csi2_timing_config(isp, csi2, timing); + csi2_recv_config(isp, csi2, &csi2->ctrl); + csi2_ctx_config(isp, csi2, &csi2->contexts[0]); + + return 0; +} + +/* + * csi2_print_status - Prints CSI2 debug information. + */ +#define CSI2_PRINT_REGISTER(isp, regs, name)\ + dev_dbg(isp->dev, "###CSI2 " #name "=0x%08x\n", \ + isp_reg_readl(isp, regs, ISPCSI2_##name)) + +static void csi2_print_status(struct isp_csi2_device *csi2) +{ + struct isp_device *isp = csi2->isp; + + if (!csi2->available) + return; + + dev_dbg(isp->dev, "-------------CSI2 Register dump-------------\n"); + + CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSCONFIG); + CSI2_PRINT_REGISTER(isp, csi2->regs1, SYSSTATUS); + CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQENABLE); + CSI2_PRINT_REGISTER(isp, csi2->regs1, IRQSTATUS); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTRL); + CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_H); + CSI2_PRINT_REGISTER(isp, csi2->regs1, GNQ); + CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_CFG); + CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQSTATUS); + CSI2_PRINT_REGISTER(isp, csi2->regs1, SHORT_PACKET); + CSI2_PRINT_REGISTER(isp, csi2->regs1, PHY_IRQENABLE); + CSI2_PRINT_REGISTER(isp, csi2->regs1, DBG_P); + CSI2_PRINT_REGISTER(isp, csi2->regs1, TIMING); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL1(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL2(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_OFST(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PING_ADDR(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_DAT_PONG_ADDR(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQENABLE(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_IRQSTATUS(0)); + CSI2_PRINT_REGISTER(isp, csi2->regs1, CTX_CTRL3(0)); + + dev_dbg(isp->dev, "--------------------------------------------\n"); +} + +/* ----------------------------------------------------------------------------- + * Interrupt handling + */ + +/* + * csi2_isr_buffer - Does buffer handling at end-of-frame + * when writing to memory. + */ +static void csi2_isr_buffer(struct isp_csi2_device *csi2) +{ + struct isp_device *isp = csi2->isp; + struct isp_buffer *buffer; + + csi2_ctx_enable(isp, csi2, 0, 0); + + buffer = omap3isp_video_buffer_next(&csi2->video_out, 0); + + /* + * Let video queue operation restart engine if there is an underrun + * condition. + */ + if (buffer == NULL) + return; + + csi2_set_outaddr(csi2, buffer->isp_addr); + csi2_ctx_enable(isp, csi2, 0, 1); +} + +static void csi2_isr_ctx(struct isp_csi2_device *csi2, + struct isp_csi2_ctx_cfg *ctx) +{ + struct isp_device *isp = csi2->isp; + unsigned int n = ctx->ctxnum; + u32 status; + + status = isp_reg_readl(isp, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n)); + isp_reg_writel(isp, status, csi2->regs1, ISPCSI2_CTX_IRQSTATUS(n)); + + /* Propagate frame number */ + if (status & ISPCSI2_CTX_IRQSTATUS_FS_IRQ) { + struct isp_pipeline *pipe = + to_isp_pipeline(&csi2->subdev.entity); + if (pipe->do_propagation) + atomic_inc(&pipe->frame_number); + } + + if (!(status & ISPCSI2_CTX_IRQSTATUS_FE_IRQ)) + return; + + /* Skip interrupts until we reach the frame skip count. The CSI2 will be + * automatically disabled, as the frame skip count has been programmed + * in the CSI2_CTx_CTRL1::COUNT field, so reenable it. + * + * It would have been nice to rely on the FRAME_NUMBER interrupt instead + * but it turned out that the interrupt is only generated when the CSI2 + * writes to memory (the CSI2_CTx_CTRL1::COUNT field is decreased + * correctly and reaches 0 when data is forwarded to the video port only + * but no interrupt arrives). Maybe a CSI2 hardware bug. + */ + if (csi2->frame_skip) { + csi2->frame_skip--; + if (csi2->frame_skip == 0) { + ctx->format_id = csi2_ctx_map_format(csi2); + csi2_ctx_config(isp, csi2, ctx); + csi2_ctx_enable(isp, csi2, n, 1); + } + return; + } + + if (csi2->output & CSI2_OUTPUT_MEMORY) + csi2_isr_buffer(csi2); +} + +/* + * omap3isp_csi2_isr - CSI2 interrupt handling. + * + * Return -EIO on Transmission error + */ +int omap3isp_csi2_isr(struct isp_csi2_device *csi2) +{ + u32 csi2_irqstatus, cpxio1_irqstatus; + struct isp_device *isp = csi2->isp; + int retval = 0; + + if (!csi2->available) + return -ENODEV; + + csi2_irqstatus = isp_reg_readl(isp, csi2->regs1, ISPCSI2_IRQSTATUS); + isp_reg_writel(isp, csi2_irqstatus, csi2->regs1, ISPCSI2_IRQSTATUS); + + /* Failure Cases */ + if (csi2_irqstatus & ISPCSI2_IRQSTATUS_COMPLEXIO1_ERR_IRQ) { + cpxio1_irqstatus = isp_reg_readl(isp, csi2->regs1, + ISPCSI2_PHY_IRQSTATUS); + isp_reg_writel(isp, cpxio1_irqstatus, + csi2->regs1, ISPCSI2_PHY_IRQSTATUS); + dev_dbg(isp->dev, "CSI2: ComplexIO Error IRQ " + "%x\n", cpxio1_irqstatus); + retval = -EIO; + } + + if (csi2_irqstatus & (ISPCSI2_IRQSTATUS_OCP_ERR_IRQ | + ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ | + ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ | + ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ | + ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ)) { + dev_dbg(isp->dev, "CSI2 Err:" + " OCP:%d," + " Short_pack:%d," + " ECC:%d," + " CPXIO2:%d," + " FIFO_OVF:%d," + "\n", + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_OCP_ERR_IRQ) ? 1 : 0, + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_SHORT_PACKET_IRQ) ? 1 : 0, + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_ECC_NO_CORRECTION_IRQ) ? 1 : 0, + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_COMPLEXIO2_ERR_IRQ) ? 1 : 0, + (csi2_irqstatus & + ISPCSI2_IRQSTATUS_FIFO_OVF_IRQ) ? 1 : 0); + retval = -EIO; + } + + if (omap3isp_module_sync_is_stopping(&csi2->wait, &csi2->stopping)) + return 0; + + /* Successful cases */ + if (csi2_irqstatus & ISPCSI2_IRQSTATUS_CONTEXT(0)) + csi2_isr_ctx(csi2, &csi2->contexts[0]); + + if (csi2_irqstatus & ISPCSI2_IRQSTATUS_ECC_CORRECTION_IRQ) + dev_dbg(isp->dev, "CSI2: ECC correction done\n"); + + return retval; +} + +/* ----------------------------------------------------------------------------- + * ISP video operations + */ + +/* + * csi2_queue - Queues the first buffer when using memory output + * @video: The video node + * @buffer: buffer to queue + */ +static int csi2_queue(struct isp_video *video, struct isp_buffer *buffer) +{ + struct isp_device *isp = video->isp; + struct isp_csi2_device *csi2 = &isp->isp_csi2a; + + csi2_set_outaddr(csi2, buffer->isp_addr); + + /* + * If streaming was enabled before there was a buffer queued + * or underrun happened in the ISR, the hardware was not enabled + * and DMA queue flag ISP_VIDEO_DMAQUEUE_UNDERRUN is still set. + * Enable it now. + */ + if (csi2->video_out.dmaqueue_flags & ISP_VIDEO_DMAQUEUE_UNDERRUN) { + /* Enable / disable context 0 and IRQs */ + csi2_if_enable(isp, csi2, 1); + csi2_ctx_enable(isp, csi2, 0, 1); + isp_video_dmaqueue_flags_clr(&csi2->video_out); + } + + return 0; +} + +static const struct isp_video_operations csi2_ispvideo_ops = { + .queue = csi2_queue, +}; + +/* ----------------------------------------------------------------------------- + * V4L2 subdev operations + */ + +static struct v4l2_mbus_framefmt * +__csi2_get_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh, + unsigned int pad, enum v4l2_subdev_format_whence which) +{ + if (which == V4L2_SUBDEV_FORMAT_TRY) + return v4l2_subdev_get_try_format(fh, pad); + else + return &csi2->formats[pad]; +} + +static void +csi2_try_format(struct isp_csi2_device *csi2, struct v4l2_subdev_fh *fh, + unsigned int pad, struct v4l2_mbus_framefmt *fmt, + enum v4l2_subdev_format_whence which) +{ + enum v4l2_mbus_pixelcode pixelcode; + struct v4l2_mbus_framefmt *format; + const struct isp_format_info *info; + unsigned int i; + + switch (pad) { + case CSI2_PAD_SINK: + /* Clamp the width and height to valid range (1-8191). */ + for (i = 0; i < ARRAY_SIZE(csi2_input_fmts); i++) { + if (fmt->code == csi2_input_fmts[i]) + break; + } + + /* If not found, use SGRBG10 as default */ + if (i >= ARRAY_SIZE(csi2_input_fmts)) + fmt->code = V4L2_MBUS_FMT_SGRBG10_1X10; + + fmt->width = clamp_t(u32, fmt->width, 1, 8191); + fmt->height = clamp_t(u32, fmt->height, 1, 8191); + break; + + case CSI2_PAD_SOURCE: + /* Source format same as sink format, except for DPCM + * compression. + */ + pixelcode = fmt->code; + format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, which); + memcpy(fmt, format, sizeof(*fmt)); + + /* + * Only Allow DPCM decompression, and check that the + * pattern is preserved + */ + info = omap3isp_video_format_info(fmt->code); + if (info->uncompressed == pixelcode) + fmt->code = pixelcode; + break; + } + + /* RGB, non-interlaced */ + fmt->colorspace = V4L2_COLORSPACE_SRGB; + fmt->field = V4L2_FIELD_NONE; +} + +/* + * csi2_enum_mbus_code - Handle pixel format enumeration + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @code : pointer to v4l2_subdev_mbus_code_enum structure + * return -EINVAL or zero on success + */ +static int csi2_enum_mbus_code(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_mbus_code_enum *code) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + const struct isp_format_info *info; + + if (code->pad == CSI2_PAD_SINK) { + if (code->index >= ARRAY_SIZE(csi2_input_fmts)) + return -EINVAL; + + code->code = csi2_input_fmts[code->index]; + } else { + format = __csi2_get_format(csi2, fh, CSI2_PAD_SINK, + V4L2_SUBDEV_FORMAT_TRY); + switch (code->index) { + case 0: + /* Passthrough sink pad code */ + code->code = format->code; + break; + case 1: + /* Uncompressed code */ + info = omap3isp_video_format_info(format->code); + if (info->uncompressed == format->code) + return -EINVAL; + + code->code = info->uncompressed; + break; + default: + return -EINVAL; + } + } + + return 0; +} + +static int csi2_enum_frame_size(struct v4l2_subdev *sd, + struct v4l2_subdev_fh *fh, + struct v4l2_subdev_frame_size_enum *fse) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt format; + + if (fse->index != 0) + return -EINVAL; + + format.code = fse->code; + format.width = 1; + format.height = 1; + csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->min_width = format.width; + fse->min_height = format.height; + + if (format.code != fse->code) + return -EINVAL; + + format.code = fse->code; + format.width = -1; + format.height = -1; + csi2_try_format(csi2, fh, fse->pad, &format, V4L2_SUBDEV_FORMAT_TRY); + fse->max_width = format.width; + fse->max_height = format.height; + + return 0; +} + +/* + * csi2_get_format - Handle get format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on sucess + */ +static int csi2_get_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + fmt->format = *format; + return 0; +} + +/* + * csi2_set_format - Handle set format by pads subdev method + * @sd : pointer to v4l2 subdev structure + * @fh : V4L2 subdev file handle + * @fmt: pointer to v4l2 subdev format structure + * return -EINVAL or zero on success + */ +static int csi2_set_format(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh, + struct v4l2_subdev_format *fmt) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct v4l2_mbus_framefmt *format; + + format = __csi2_get_format(csi2, fh, fmt->pad, fmt->which); + if (format == NULL) + return -EINVAL; + + csi2_try_format(csi2, fh, fmt->pad, &fmt->format, fmt->which); + *format = fmt->format; + + /* Propagate the format from sink to source */ + if (fmt->pad == CSI2_PAD_SINK) { + format = __csi2_get_format(csi2, fh, CSI2_PAD_SOURCE, + fmt->which); + *format = fmt->format; + csi2_try_format(csi2, fh, CSI2_PAD_SOURCE, format, fmt->which); + } + + return 0; +} + +/* + * csi2_init_formats - Initialize formats on all pads + * @sd: ISP CSI2 V4L2 subdevice + * @fh: V4L2 subdev file handle + * + * Initialize all pad formats with default values. If fh is not NULL, try + * formats are initialized on the file handle. Otherwise active formats are + * initialized on the device. + */ +static int csi2_init_formats(struct v4l2_subdev *sd, struct v4l2_subdev_fh *fh) +{ + struct v4l2_subdev_format format; + + memset(&format, 0, sizeof(format)); + format.pad = CSI2_PAD_SINK; + format.which = fh ? V4L2_SUBDEV_FORMAT_TRY : V4L2_SUBDEV_FORMAT_ACTIVE; + format.format.code = V4L2_MBUS_FMT_SGRBG10_1X10; + format.format.width = 4096; + format.format.height = 4096; + csi2_set_format(sd, fh, &format); + + return 0; +} + +/* + * csi2_set_stream - Enable/Disable streaming on the CSI2 module + * @sd: ISP CSI2 V4L2 subdevice + * @enable: ISP pipeline stream state + * + * Return 0 on success or a negative error code otherwise. + */ +static int csi2_set_stream(struct v4l2_subdev *sd, int enable) +{ + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct isp_device *isp = csi2->isp; + struct isp_pipeline *pipe = to_isp_pipeline(&csi2->subdev.entity); + struct isp_video *video_out = &csi2->video_out; + + switch (enable) { + case ISP_PIPELINE_STREAM_CONTINUOUS: + if (omap3isp_csiphy_acquire(csi2->phy) < 0) + return -ENODEV; + csi2->use_fs_irq = pipe->do_propagation; + if (csi2->output & CSI2_OUTPUT_MEMORY) + omap3isp_sbl_enable(isp, OMAP3_ISP_SBL_CSI2A_WRITE); + csi2_configure(csi2); + csi2_print_status(csi2); + + /* + * When outputting to memory with no buffer available, let the + * buffer queue handler start the hardware. A DMA queue flag + * ISP_VIDEO_DMAQUEUE_QUEUED will be set as soon as there is + * a buffer available. + */ + if (csi2->output & CSI2_OUTPUT_MEMORY && + !(video_out->dmaqueue_flags & ISP_VIDEO_DMAQUEUE_QUEUED)) + break; + /* Enable context 0 and IRQs */ + atomic_set(&csi2->stopping, 0); + csi2_ctx_enable(isp, csi2, 0, 1); + csi2_if_enable(isp, csi2, 1); + isp_video_dmaqueue_flags_clr(video_out); + break; + + case ISP_PIPELINE_STREAM_STOPPED: + if (csi2->state == ISP_PIPELINE_STREAM_STOPPED) + return 0; + if (omap3isp_module_sync_idle(&sd->entity, &csi2->wait, + &csi2->stopping)) + dev_dbg(isp->dev, "%s: module stop timeout.\n", + sd->name); + csi2_ctx_enable(isp, csi2, 0, 0); + csi2_if_enable(isp, csi2, 0); + csi2_irq_ctx_set(isp, csi2, 0); + omap3isp_csiphy_release(csi2->phy); + isp_video_dmaqueue_flags_clr(video_out); + omap3isp_sbl_disable(isp, OMAP3_ISP_SBL_CSI2A_WRITE); + break; + } + + csi2->state = enable; + return 0; +} + +/* subdev video operations */ +static const struct v4l2_subdev_video_ops csi2_video_ops = { + .s_stream = csi2_set_stream, +}; + +/* subdev pad operations */ +static const struct v4l2_subdev_pad_ops csi2_pad_ops = { + .enum_mbus_code = csi2_enum_mbus_code, + .enum_frame_size = csi2_enum_frame_size, + .get_fmt = csi2_get_format, + .set_fmt = csi2_set_format, +}; + +/* subdev operations */ +static const struct v4l2_subdev_ops csi2_ops = { + .video = &csi2_video_ops, + .pad = &csi2_pad_ops, +}; + +/* subdev internal operations */ +static const struct v4l2_subdev_internal_ops csi2_internal_ops = { + .open = csi2_init_formats, +}; + +/* ----------------------------------------------------------------------------- + * Media entity operations + */ + +/* + * csi2_link_setup - Setup CSI2 connections. + * @entity : Pointer to media entity structure + * @local : Pointer to local pad array + * @remote : Pointer to remote pad array + * @flags : Link flags + * return -EINVAL or zero on success + */ +static int csi2_link_setup(struct media_entity *entity, + const struct media_pad *local, + const struct media_pad *remote, u32 flags) +{ + struct v4l2_subdev *sd = media_entity_to_v4l2_subdev(entity); + struct isp_csi2_device *csi2 = v4l2_get_subdevdata(sd); + struct isp_csi2_ctrl_cfg *ctrl = &csi2->ctrl; + + /* + * The ISP core doesn't support pipelines with multiple video outputs. + * Revisit this when it will be implemented, and return -EBUSY for now. + */ + + switch (local->index | media_entity_type(remote->entity)) { + case CSI2_PAD_SOURCE | MEDIA_ENT_T_DEVNODE: + if (flags & MEDIA_LNK_FL_ENABLED) { + if (csi2->output & ~CSI2_OUTPUT_MEMORY) + return -EBUSY; + csi2->output |= CSI2_OUTPUT_MEMORY; + } else { + csi2->output &= ~CSI2_OUTPUT_MEMORY; + } + break; + + case CSI2_PAD_SOURCE | MEDIA_ENT_T_V4L2_SUBDEV: + if (flags & MEDIA_LNK_FL_ENABLED) { + if (csi2->output & ~CSI2_OUTPUT_CCDC) + return -EBUSY; + csi2->output |= CSI2_OUTPUT_CCDC; + } else { + csi2->output &= ~CSI2_OUTPUT_CCDC; + } + break; + + default: + /* Link from camera to CSI2 is fixed... */ + return -EINVAL; + } + + ctrl->vp_only_enable = + (csi2->output & CSI2_OUTPUT_MEMORY) ? false : true; + ctrl->vp_clk_enable = !!(csi2->output & CSI2_OUTPUT_CCDC); + + return 0; +} + +/* media operations */ +static const struct media_entity_operations csi2_media_ops = { + .link_setup = csi2_link_setup, +}; + +/* + * csi2_init_entities - Initialize subdev and media entity. + * @csi2: Pointer to csi2 structure. + * return -ENOMEM or zero on success + */ +static int csi2_init_entities(struct isp_csi2_device *csi2) +{ + struct v4l2_subdev *sd = &csi2->subdev; + struct media_pad *pads = csi2->pads; + struct media_entity *me = &sd->entity; + int ret; + + v4l2_subdev_init(sd, &csi2_ops); + sd->internal_ops = &csi2_internal_ops; + strlcpy(sd->name, "OMAP3 ISP CSI2a", sizeof(sd->name)); + + sd->grp_id = 1 << 16; /* group ID for isp subdevs */ + v4l2_set_subdevdata(sd, csi2); + sd->flags |= V4L2_SUBDEV_FL_HAS_DEVNODE; + + pads[CSI2_PAD_SOURCE].flags = MEDIA_PAD_FL_SOURCE; + pads[CSI2_PAD_SINK].flags = MEDIA_PAD_FL_SINK; + + me->ops = &csi2_media_ops; + ret = media_entity_init(me, CSI2_PADS_NUM, pads, 0); + if (ret < 0) + return ret; + + csi2_init_formats(sd, NULL); + + /* Video device node */ + csi2->video_out.type = V4L2_BUF_TYPE_VIDEO_CAPTURE; + csi2->video_out.ops = &csi2_ispvideo_ops; + csi2->video_out.bpl_alignment = 32; + csi2->video_out.bpl_zero_padding = 1; + csi2->video_out.bpl_max = 0x1ffe0; + csi2->video_out.isp = csi2->isp; + csi2->video_out.capture_mem = PAGE_ALIGN(4096 * 4096) * 3; + + ret = omap3isp_video_init(&csi2->video_out, "CSI2a"); + if (ret < 0) + return ret; + + /* Connect the CSI2 subdev to the video node. */ + ret = media_entity_create_link(&csi2->subdev.entity, CSI2_PAD_SOURCE, + &csi2->video_out.video.entity, 0, 0); + if (ret < 0) + return ret; + + return 0; +} + +void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2) +{ + media_entity_cleanup(&csi2->subdev.entity); + + v4l2_device_unregister_subdev(&csi2->subdev); + omap3isp_video_unregister(&csi2->video_out); +} + +int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2, + struct v4l2_device *vdev) +{ + int ret; + + /* Register the subdev and video nodes. */ + ret = v4l2_device_register_subdev(vdev, &csi2->subdev); + if (ret < 0) + goto error; + + ret = omap3isp_video_register(&csi2->video_out, vdev); + if (ret < 0) + goto error; + + return 0; + +error: + omap3isp_csi2_unregister_entities(csi2); + return ret; +} + +/* ----------------------------------------------------------------------------- + * ISP CSI2 initialisation and cleanup + */ + +/* + * omap3isp_csi2_cleanup - Routine for module driver cleanup + */ +void omap3isp_csi2_cleanup(struct isp_device *isp) +{ +} + +/* + * omap3isp_csi2_init - Routine for module driver init + */ +int omap3isp_csi2_init(struct isp_device *isp) +{ + struct isp_csi2_device *csi2a = &isp->isp_csi2a; + struct isp_csi2_device *csi2c = &isp->isp_csi2c; + int ret; + + csi2a->isp = isp; + csi2a->available = 1; + csi2a->regs1 = OMAP3_ISP_IOMEM_CSI2A_REGS1; + csi2a->regs2 = OMAP3_ISP_IOMEM_CSI2A_REGS2; + csi2a->phy = &isp->isp_csiphy2; + csi2a->state = ISP_PIPELINE_STREAM_STOPPED; + init_waitqueue_head(&csi2a->wait); + + ret = csi2_init_entities(csi2a); + if (ret < 0) + goto fail; + + if (isp->revision == ISP_REVISION_15_0) { + csi2c->isp = isp; + csi2c->available = 1; + csi2c->regs1 = OMAP3_ISP_IOMEM_CSI2C_REGS1; + csi2c->regs2 = OMAP3_ISP_IOMEM_CSI2C_REGS2; + csi2c->phy = &isp->isp_csiphy1; + csi2c->state = ISP_PIPELINE_STREAM_STOPPED; + init_waitqueue_head(&csi2c->wait); + } + + return 0; +fail: + omap3isp_csi2_cleanup(isp); + return ret; +} diff --git a/drivers/media/video/omap3isp/ispcsi2.h b/drivers/media/video/omap3isp/ispcsi2.h new file mode 100644 index 0000000..456fb7f --- /dev/null +++ b/drivers/media/video/omap3isp/ispcsi2.h @@ -0,0 +1,166 @@ +/* + * ispcsi2.h + * + * TI OMAP3 ISP - CSI2 module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_CSI2_H +#define OMAP3_ISP_CSI2_H + +#include <linux/types.h> +#include <linux/videodev2.h> + +struct isp_csiphy; + +/* This is not an exhaustive list */ +enum isp_csi2_pix_formats { + CSI2_PIX_FMT_OTHERS = 0, + CSI2_PIX_FMT_YUV422_8BIT = 0x1e, + CSI2_PIX_FMT_YUV422_8BIT_VP = 0x9e, + CSI2_PIX_FMT_RAW10_EXP16 = 0xab, + CSI2_PIX_FMT_RAW10_EXP16_VP = 0x12f, + CSI2_PIX_FMT_RAW8 = 0x2a, + CSI2_PIX_FMT_RAW8_DPCM10_EXP16 = 0x2aa, + CSI2_PIX_FMT_RAW8_DPCM10_VP = 0x32a, + CSI2_PIX_FMT_RAW8_VP = 0x12a, + CSI2_USERDEF_8BIT_DATA1_DPCM10_VP = 0x340, + CSI2_USERDEF_8BIT_DATA1_DPCM10 = 0x2c0, + CSI2_USERDEF_8BIT_DATA1 = 0x40, +}; + +enum isp_csi2_irqevents { + OCP_ERR_IRQ = 0x4000, + SHORT_PACKET_IRQ = 0x2000, + ECC_CORRECTION_IRQ = 0x1000, + ECC_NO_CORRECTION_IRQ = 0x800, + COMPLEXIO2_ERR_IRQ = 0x400, + COMPLEXIO1_ERR_IRQ = 0x200, + FIFO_OVF_IRQ = 0x100, + CONTEXT7 = 0x80, + CONTEXT6 = 0x40, + CONTEXT5 = 0x20, + CONTEXT4 = 0x10, + CONTEXT3 = 0x8, + CONTEXT2 = 0x4, + CONTEXT1 = 0x2, + CONTEXT0 = 0x1, +}; + +enum isp_csi2_ctx_irqevents { + CTX_ECC_CORRECTION = 0x100, + CTX_LINE_NUMBER = 0x80, + CTX_FRAME_NUMBER = 0x40, + CTX_CS = 0x20, + CTX_LE = 0x8, + CTX_LS = 0x4, + CTX_FE = 0x2, + CTX_FS = 0x1, +}; + +enum isp_csi2_frame_mode { + ISP_CSI2_FRAME_IMMEDIATE, + ISP_CSI2_FRAME_AFTERFEC, +}; + +#define ISP_CSI2_MAX_CTX_NUM 7 + +struct isp_csi2_ctx_cfg { + u8 ctxnum; /* context number 0 - 7 */ + u8 dpcm_decompress; + + /* Fields in CSI2_CTx_CTRL2 - locked by CSI2_CTx_CTRL1.CTX_EN */ + u8 virtual_id; + u16 format_id; /* as in CSI2_CTx_CTRL2[9:0] */ + u8 dpcm_predictor; /* 1: simple, 0: advanced */ + + /* Fields in CSI2_CTx_CTRL1/3 - Shadowed */ + u16 alpha; + u16 data_offset; + u32 ping_addr; + u32 pong_addr; + u8 eof_enabled; + u8 eol_enabled; + u8 checksum_enabled; + u8 enabled; +}; + +struct isp_csi2_timing_cfg { + u8 ionum; /* IO1 or IO2 as in CSI2_TIMING */ + unsigned force_rx_mode:1; + unsigned stop_state_16x:1; + unsigned stop_state_4x:1; + u16 stop_state_counter; +}; + +struct isp_csi2_ctrl_cfg { + bool vp_clk_enable; + bool vp_only_enable; + u8 vp_out_ctrl; + enum isp_csi2_frame_mode frame_mode; + bool ecc_enable; + bool if_enable; +}; + +#define CSI2_PAD_SINK 0 +#define CSI2_PAD_SOURCE 1 +#define CSI2_PADS_NUM 2 + +#define CSI2_OUTPUT_CCDC (1 << 0) +#define CSI2_OUTPUT_MEMORY (1 << 1) + +struct isp_csi2_device { + struct v4l2_subdev subdev; + struct media_pad pads[CSI2_PADS_NUM]; + struct v4l2_mbus_framefmt formats[CSI2_PADS_NUM]; + + struct isp_video video_out; + struct isp_device *isp; + + u8 available; /* Is the IP present on the silicon? */ + + /* mem resources - enums as defined in enum isp_mem_resources */ + u8 regs1; + u8 regs2; + + u32 output; /* output to CCDC, memory or both? */ + bool dpcm_decompress; + unsigned int frame_skip; + bool use_fs_irq; + + struct isp_csiphy *phy; + struct isp_csi2_ctx_cfg contexts[ISP_CSI2_MAX_CTX_NUM + 1]; + struct isp_csi2_timing_cfg timing[2]; + struct isp_csi2_ctrl_cfg ctrl; + enum isp_pipeline_stream_state state; + wait_queue_head_t wait; + atomic_t stopping; +}; + +int omap3isp_csi2_isr(struct isp_csi2_device *csi2); +int omap3isp_csi2_reset(struct isp_csi2_device *csi2); +int omap3isp_csi2_init(struct isp_device *isp); +void omap3isp_csi2_cleanup(struct isp_device *isp); +void omap3isp_csi2_unregister_entities(struct isp_csi2_device *csi2); +int omap3isp_csi2_register_entities(struct isp_csi2_device *csi2, + struct v4l2_device *vdev); +#endif /* OMAP3_ISP_CSI2_H */ diff --git a/drivers/media/video/omap3isp/ispcsiphy.c b/drivers/media/video/omap3isp/ispcsiphy.c new file mode 100644 index 0000000..5be37ce --- /dev/null +++ b/drivers/media/video/omap3isp/ispcsiphy.c @@ -0,0 +1,247 @@ +/* + * ispcsiphy.c + * + * TI OMAP3 ISP - CSI PHY module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/regulator/consumer.h> + +#include "isp.h" +#include "ispreg.h" +#include "ispcsiphy.h" + +/* + * csiphy_lanes_config - Configuration of CSIPHY lanes. + * + * Updates HW configuration. + * Called with phy->mutex taken. + */ +static void csiphy_lanes_config(struct isp_csiphy *phy) +{ + unsigned int i; + u32 reg; + + reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG); + + for (i = 0; i < phy->num_data_lanes; i++) { + reg &= ~(ISPCSI2_PHY_CFG_DATA_POL_MASK(i + 1) | + ISPCSI2_PHY_CFG_DATA_POSITION_MASK(i + 1)); + reg |= (phy->lanes.data[i].pol << + ISPCSI2_PHY_CFG_DATA_POL_SHIFT(i + 1)); + reg |= (phy->lanes.data[i].pos << + ISPCSI2_PHY_CFG_DATA_POSITION_SHIFT(i + 1)); + } + + reg &= ~(ISPCSI2_PHY_CFG_CLOCK_POL_MASK | + ISPCSI2_PHY_CFG_CLOCK_POSITION_MASK); + reg |= phy->lanes.clk.pol << ISPCSI2_PHY_CFG_CLOCK_POL_SHIFT; + reg |= phy->lanes.clk.pos << ISPCSI2_PHY_CFG_CLOCK_POSITION_SHIFT; + + isp_reg_writel(phy->isp, reg, phy->cfg_regs, ISPCSI2_PHY_CFG); +} + +/* + * csiphy_power_autoswitch_enable + * @enable: Sets or clears the autoswitch function enable flag. + */ +static void csiphy_power_autoswitch_enable(struct isp_csiphy *phy, bool enable) +{ + isp_reg_clr_set(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG, + ISPCSI2_PHY_CFG_PWR_AUTO, + enable ? ISPCSI2_PHY_CFG_PWR_AUTO : 0); +} + +/* + * csiphy_set_power + * @power: Power state to be set. + * + * Returns 0 if successful, or -EBUSY if the retry count is exceeded. + */ +static int csiphy_set_power(struct isp_csiphy *phy, u32 power) +{ + u32 reg; + u8 retry_count; + + isp_reg_clr_set(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG, + ISPCSI2_PHY_CFG_PWR_CMD_MASK, power); + + retry_count = 0; + do { + udelay(50); + reg = isp_reg_readl(phy->isp, phy->cfg_regs, ISPCSI2_PHY_CFG) & + ISPCSI2_PHY_CFG_PWR_STATUS_MASK; + + if (reg != power >> 2) + retry_count++; + + } while ((reg != power >> 2) && (retry_count < 100)); + + if (retry_count == 100) { + printk(KERN_ERR "CSI2 CIO set power failed!\n"); + return -EBUSY; + } + + return 0; +} + +/* + * csiphy_dphy_config - Configure CSI2 D-PHY parameters. + * + * Called with phy->mutex taken. + */ +static void csiphy_dphy_config(struct isp_csiphy *phy) +{ + u32 reg; + + /* Set up ISPCSIPHY_REG0 */ + reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG0); + + reg &= ~(ISPCSIPHY_REG0_THS_TERM_MASK | + ISPCSIPHY_REG0_THS_SETTLE_MASK); + reg |= phy->dphy.ths_term << ISPCSIPHY_REG0_THS_TERM_SHIFT; + reg |= phy->dphy.ths_settle << ISPCSIPHY_REG0_THS_SETTLE_SHIFT; + + isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG0); + + /* Set up ISPCSIPHY_REG1 */ + reg = isp_reg_readl(phy->isp, phy->phy_regs, ISPCSIPHY_REG1); + + reg &= ~(ISPCSIPHY_REG1_TCLK_TERM_MASK | + ISPCSIPHY_REG1_TCLK_MISS_MASK | + ISPCSIPHY_REG1_TCLK_SETTLE_MASK); + reg |= phy->dphy.tclk_term << ISPCSIPHY_REG1_TCLK_TERM_SHIFT; + reg |= phy->dphy.tclk_miss << ISPCSIPHY_REG1_TCLK_MISS_SHIFT; + reg |= phy->dphy.tclk_settle << ISPCSIPHY_REG1_TCLK_SETTLE_SHIFT; + + isp_reg_writel(phy->isp, reg, phy->phy_regs, ISPCSIPHY_REG1); +} + +static int csiphy_config(struct isp_csiphy *phy, + struct isp_csiphy_dphy_cfg *dphy, + struct isp_csiphy_lanes_cfg *lanes) +{ + unsigned int used_lanes = 0; + unsigned int i; + + /* Clock and data lanes verification */ + for (i = 0; i < phy->num_data_lanes; i++) { + if (lanes->data[i].pol > 1 || lanes->data[i].pos > 3) + return -EINVAL; + + if (used_lanes & (1 << lanes->data[i].pos)) + return -EINVAL; + + used_lanes |= 1 << lanes->data[i].pos; + } + + if (lanes->clk.pol > 1 || lanes->clk.pos > 3) + return -EINVAL; + + if (lanes->clk.pos == 0 || used_lanes & (1 << lanes->clk.pos)) + return -EINVAL; + + mutex_lock(&phy->mutex); + phy->dphy = *dphy; + phy->lanes = *lanes; + mutex_unlock(&phy->mutex); + + return 0; +} + +int omap3isp_csiphy_acquire(struct isp_csiphy *phy) +{ + int rval; + + if (phy->vdd == NULL) { + dev_err(phy->isp->dev, "Power regulator for CSI PHY not " + "available\n"); + return -ENODEV; + } + + mutex_lock(&phy->mutex); + + rval = regulator_enable(phy->vdd); + if (rval < 0) + goto done; + + omap3isp_csi2_reset(phy->csi2); + + csiphy_dphy_config(phy); + csiphy_lanes_config(phy); + + rval = csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_ON); + if (rval) { + regulator_disable(phy->vdd); + goto done; + } + + csiphy_power_autoswitch_enable(phy, true); + phy->phy_in_use = 1; + +done: + mutex_unlock(&phy->mutex); + return rval; +} + +void omap3isp_csiphy_release(struct isp_csiphy *phy) +{ + mutex_lock(&phy->mutex); + if (phy->phy_in_use) { + csiphy_power_autoswitch_enable(phy, false); + csiphy_set_power(phy, ISPCSI2_PHY_CFG_PWR_CMD_OFF); + regulator_disable(phy->vdd); + phy->phy_in_use = 0; + } + mutex_unlock(&phy->mutex); +} + +/* + * omap3isp_csiphy_init - Initialize the CSI PHY frontends + */ +int omap3isp_csiphy_init(struct isp_device *isp) +{ + struct isp_csiphy *phy1 = &isp->isp_csiphy1; + struct isp_csiphy *phy2 = &isp->isp_csiphy2; + + isp->platform_cb.csiphy_config = csiphy_config; + + phy2->isp = isp; + phy2->csi2 = &isp->isp_csi2a; + phy2->num_data_lanes = ISP_CSIPHY2_NUM_DATA_LANES; + phy2->cfg_regs = OMAP3_ISP_IOMEM_CSI2A_REGS1; + phy2->phy_regs = OMAP3_ISP_IOMEM_CSIPHY2; + mutex_init(&phy2->mutex); + + if (isp->revision == ISP_REVISION_15_0) { + phy1->isp = isp; + phy1->csi2 = &isp->isp_csi2c; + phy1->num_data_lanes = ISP_CSIPHY1_NUM_DATA_LANES; + phy1->cfg_regs = OMAP3_ISP_IOMEM_CSI2C_REGS1; + phy1->phy_regs = OMAP3_ISP_IOMEM_CSIPHY1; + mutex_init(&phy1->mutex); + } + + return 0; +} diff --git a/drivers/media/video/omap3isp/ispcsiphy.h b/drivers/media/video/omap3isp/ispcsiphy.h new file mode 100644 index 0000000..9596dc6 --- /dev/null +++ b/drivers/media/video/omap3isp/ispcsiphy.h @@ -0,0 +1,74 @@ +/* + * ispcsiphy.h + * + * TI OMAP3 ISP - CSI PHY module + * + * Copyright (C) 2010 Nokia Corporation + * Copyright (C) 2009 Texas Instruments, Inc. + * + * Contacts: Laurent Pinchart <laurent.pinchart@ideasonboard.com> + * Sakari Ailus <sakari.ailus@iki.fi> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This program is distributed in the hope that it will be useful, but + * WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU + * General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA + * 02110-1301 USA + */ + +#ifndef OMAP3_ISP_CSI_PHY_H +#define OMAP3_ISP_CSI_PHY_H + +struct isp_csi2_device; +struct regulator; + +struct csiphy_lane { + u8 pos; + u8 pol; +}; + +#define ISP_CSIPHY2_NUM_DATA_LANES 2 +#define ISP_CSIPHY1_NUM_DATA_LANES 1 + +struct isp_csiphy_lanes_cfg { + struct csiphy_lane data[ISP_CSIPHY2_NUM_DATA_LANES]; + struct csiphy_lane clk; +}; + +struct isp_csiphy_dphy_cfg { + u8 ths_term; + u8 ths_settle; + u8 tclk_term; + unsigned tclk_miss:1; + u8 tclk_settle; +}; + +struct isp_csiphy { + struct isp_device *isp; + struct mutex mutex; /* serialize csiphy configuration */ + u8 phy_in_use; + struct isp_csi2_device *csi2; + struct regulator *vdd; + + /* mem resources - enums as defined in enum isp_mem_resources */ + unsigned int cfg_regs; + unsigned int phy_regs; + + u8 num_data_lanes; /* number of CSI2 Data Lanes supported */ + struct isp_csiphy_lanes_cfg lanes; + struct isp_csiphy_dphy_cfg dphy; +}; + +int omap3isp_csiphy_acquire(struct isp_csiphy *phy); +void omap3isp_csiphy_release(struct isp_csiphy *phy); +int omap3isp_csiphy_init(struct isp_device *isp); + +#endif /* OMAP3_ISP_CSI_PHY_H */ |