mfd: Add WM8994 interrupt controller support

The WM8994 has an interrupt controller which supports interrupts for
both CODEC and GPIO portions of the chip. Support this using genirq,
while allowing for systems that do not have an interrupt hooked up.

Wrapper functions are provided for the IRQ request and free to simplify
the code in consumer drivers when handling cases where IRQs are not
set up.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Acked-by: Samuel Ortiz <sameo@linux.intel.com>

1 files changed, 40 insertions, 3 deletions

diff --git a/drivers/mfd/wm8994-core.c b/drivers/mfd/wm8994-core.c
index 844e1c1..39cde82 100644
--- a/drivers/mfd/wm8994-core.c
+++ b/drivers/mfd/wm8994-core.c
@@ -172,9 +172,34 @@ static struct mfd_cell wm8994_regulator_devs[] = {
 	{ .name = "wm8994-ldo", .id = 2 },
 };
 
+static struct resource wm8994_codec_resources[] = {
+	{
+		.start = WM8994_IRQ_TEMP_SHUT,
+		.end   = WM8994_IRQ_TEMP_WARN,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct resource wm8994_gpio_resources[] = {
+	{
+		.start = WM8994_IRQ_GPIO(1),
+		.end   = WM8994_IRQ_GPIO(11),
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
 static struct mfd_cell wm8994_devs[] = {
-	{ .name = "wm8994-codec" },
-	{ .name = "wm8994-gpio" },
+	{
+		.name = "wm8994-codec",
+		.num_resources = ARRAY_SIZE(wm8994_codec_resources),
+		.resources = wm8994_codec_resources,
+	},
+
+	{
+		.name = "wm8994-gpio",
+		.num_resources = ARRAY_SIZE(wm8994_gpio_resources),
+		.resources = wm8994_gpio_resources,
+	},
 };
 
 /*
@@ -235,6 +260,11 @@ static int wm8994_device_resume(struct device *dev)
 		return ret;
 	}
 
+	ret = wm8994_write(wm8994, WM8994_INTERRUPT_STATUS_1_MASK,
+			   WM8994_NUM_IRQ_REGS * 2, &wm8994->irq_masks_cur);
+	if (ret < 0)
+		dev_err(dev, "Failed to restore interrupt masks: %d\n", ret);
+
 	ret = wm8994_write(wm8994, WM8994_LDO_1, WM8994_NUM_LDO_REGS * 2,
 			   &wm8994->ldo_regs);
 	if (ret < 0)
@@ -347,6 +377,7 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq)
 
 
 	if (pdata) {
+		wm8994->irq_base = pdata->irq_base;
 		wm8994->gpio_base = pdata->gpio_base;
 
 		/* GPIO configuration is only applied if it's non-zero */
@@ -374,16 +405,20 @@ static int wm8994_device_init(struct wm8994 *wm8994, unsigned long id, int irq)
 					WM8994_LDO1_DISCH, 0);
 	}
 
+	wm8994_irq_init(wm8994);
+
 	ret = mfd_add_devices(wm8994->dev, -1,
 			      wm8994_devs, ARRAY_SIZE(wm8994_devs),
 			      NULL, 0);
 	if (ret != 0) {
 		dev_err(wm8994->dev, "Failed to add children: %d\n", ret);
-		goto err_enable;
+		goto err_irq;
 	}
 
 	return 0;
 
+err_irq:
+	wm8994_irq_exit(wm8994);
 err_enable:
 	regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
 			       wm8994->supplies);
@@ -400,6 +435,7 @@ err:
 static void wm8994_device_exit(struct wm8994 *wm8994)
 {
 	mfd_remove_devices(wm8994->dev);
+	wm8994_irq_exit(wm8994);
 	regulator_bulk_disable(ARRAY_SIZE(wm8994_main_supplies),
 			       wm8994->supplies);
 	regulator_bulk_free(ARRAY_SIZE(wm8994_main_supplies), wm8994->supplies);
@@ -468,6 +504,7 @@ static int wm8994_i2c_probe(struct i2c_client *i2c,
 	wm8994->control_data = i2c;
 	wm8994->read_dev = wm8994_i2c_read_device;
 	wm8994->write_dev = wm8994_i2c_write_device;
+	wm8994->irq = i2c->irq;
 
 	return wm8994_device_init(wm8994, id->driver_data, i2c->irq);
 }