aboutsummaryrefslogtreecommitdiffstats
path: root/drivers/net/smc91x.h
diff options
context:
space:
mode:
authorRussell King <rmk+lkml@arm.linux.org.uk>2006-01-08 01:02:07 -0800
committerLinus Torvalds <torvalds@g5.osdl.org>2006-01-08 20:13:46 -0800
commit9ded96f24c3a5fcbef954e88c443385a1af37eb9 (patch)
tree49f43337e2b8d63a5a28402a15d99fe27d8d2a1c /drivers/net/smc91x.h
parent705b6c7b34f2621f95f606d0e683daa10cdb8eb9 (diff)
downloadkernel_samsung_smdk4412-9ded96f24c3a5fcbef954e88c443385a1af37eb9.zip
kernel_samsung_smdk4412-9ded96f24c3a5fcbef954e88c443385a1af37eb9.tar.gz
kernel_samsung_smdk4412-9ded96f24c3a5fcbef954e88c443385a1af37eb9.tar.bz2
[PATCH] IRQ type flags
Some ARM platforms have the ability to program the interrupt controller to detect various interrupt edges and/or levels. For some platforms, this is critical to setup correctly, particularly those which the setting is dependent on the device. Currently, ARM drivers do (eg) the following: err = request_irq(irq, ...); set_irq_type(irq, IRQT_RISING); However, if the interrupt has previously been programmed to be level sensitive (for whatever reason) then this will cause an interrupt storm. Hence, if we combine set_irq_type() with request_irq(), we can then safely set the type prior to unmasking the interrupt. The unfortunate problem is that in order to support this, these flags need to be visible outside of the ARM architecture - drivers such as smc91x need these flags and they're cross-architecture. Finally, the SA_TRIGGER_* flag passed to request_irq() should reflect the property that the device would like. The IRQ controller code should do its best to select the most appropriate supported mode. Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
Diffstat (limited to 'drivers/net/smc91x.h')
-rw-r--r--drivers/net/smc91x.h18
1 files changed, 9 insertions, 9 deletions
diff --git a/drivers/net/smc91x.h b/drivers/net/smc91x.h
index 5c2824b..e0efd19 100644
--- a/drivers/net/smc91x.h
+++ b/drivers/net/smc91x.h
@@ -90,7 +90,7 @@
__l--; \
} \
} while (0)
-#define set_irq_type(irq, type)
+#define SMC_IRQ_FLAGS (0)
#elif defined(CONFIG_SA1100_PLEB)
/* We can only do 16-bit reads and writes in the static memory space. */
@@ -109,7 +109,7 @@
#define SMC_outw(v, a, r) writew(v, (a) + (r))
#define SMC_outsw(a, r, p, l) writesw((a) + (r), p, l)
-#define set_irq_type(irq, type) do {} while (0)
+#define SMC_IRQ_FLAGS (0)
#elif defined(CONFIG_SA1100_ASSABET)
@@ -185,11 +185,11 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#include <asm/mach-types.h>
#include <asm/arch/cpu.h>
-#define SMC_IRQ_TRIGGER_TYPE (( \
+#define SMC_IRQ_FLAGS (( \
machine_is_omap_h2() \
|| machine_is_omap_h3() \
|| (machine_is_omap_innovator() && !cpu_is_omap1510()) \
- ) ? IRQT_FALLING : IRQT_RISING)
+ ) ? SA_TRIGGER_FALLING : SA_TRIGGER_RISING)
#elif defined(CONFIG_SH_SH4202_MICRODEV)
@@ -209,7 +209,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_insw(a, r, p, l) insw((a) + (r) - 0xa0000000, p, l)
#define SMC_outsw(a, r, p, l) outsw((a) + (r) - 0xa0000000, p, l)
-#define set_irq_type(irq, type) do {} while(0)
+#define SMC_IRQ_FLAGS (0)
#elif defined(CONFIG_ISA)
@@ -237,7 +237,7 @@ SMC_outw(u16 val, void __iomem *ioaddr, int reg)
#define SMC_insw(a, r, p, l) insw(((u32)a) + (r), p, l)
#define SMC_outsw(a, r, p, l) outsw(((u32)a) + (r), p, l)
-#define set_irq_type(irq, type) do {} while(0)
+#define SMC_IRQ_FLAGS (0)
#define RPC_LSA_DEFAULT RPC_LED_TX_RX
#define RPC_LSB_DEFAULT RPC_LED_100_10
@@ -319,7 +319,7 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
au_writew(*_p++ , _a); \
} while(0)
-#define set_irq_type(irq, type) do {} while (0)
+#define SMC_IRQ_FLAGS (0)
#else
@@ -342,8 +342,8 @@ static inline void SMC_outsw (unsigned long a, int r, unsigned char* p, int l)
#endif
-#ifndef SMC_IRQ_TRIGGER_TYPE
-#define SMC_IRQ_TRIGGER_TYPE IRQT_RISING
+#ifndef SMC_IRQ_FLAGS
+#define SMC_IRQ_FLAGS SA_TRIGGER_RISING
#endif
#ifdef SMC_USE_PXA_DMA